Commit Graph

23 Commits

Author SHA1 Message Date
Ard Biesheuvel d4ffe41819 ARM: 8552/1: kallsyms: remove special lower address limit for CONFIG_ARM
Now that we no longer emit .stubs symbols into a section VMA loaded
at absolute address 0x1000, we can drop the ARM-specific override that
sets a lower limit based on CONFIG_PAGE_OFFSET, below which symbols are
filtered from the kallsyms output.

Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-04-07 21:57:15 +01:00
Linus Torvalds 2162b80fca Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild updates from Michal Marek:

 - make dtbs_install fix

 - Error handling fix fixdep and link-vmlinux.sh

 - __UNIQUE_ID fix for clang

 - Fix for if_changed_* to suppress the "is up to date." message

 - The kernel is built with -Werror=incompatible-pointer-types

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Add option to turn incompatible pointer check into error
  kbuild: suppress annoying "... is up to date." message
  kbuild: fixdep: Check fstat(2) return value
  scripts/link-vmlinux.sh: force error on kallsyms failure
  Kbuild: provide a __UNIQUE_ID for clang
  dtbsinstall: don't move target directory out of the way
2016-03-24 19:26:47 -07:00
Ard Biesheuvel 2213e9a66b kallsyms: add support for relative offsets in kallsyms address table
Similar to how relative extables are implemented, it is possible to emit
the kallsyms table in such a way that it contains offsets relative to
some anchor point in the kernel image rather than absolute addresses.

On 64-bit architectures, it cuts the size of the kallsyms address table
in half, since offsets between kernel symbols can typically be expressed
in 32 bits.  This saves several hundreds of kilobytes of permanent
.rodata on average.  In addition, the kallsyms address table is no
longer subject to dynamic relocation when CONFIG_RELOCATABLE is in
effect, so the relocation work done after decompression now doesn't have
to do relocation updates for all these values.  This saves up to 24
bytes (i.e., the size of a ELF64 RELA relocation table entry) per value,
which easily adds up to a couple of megabytes of uncompressed __init
data on ppc64 or arm64.  Even if these relocation entries typically
compress well, the combined size reduction of 2.8 MB uncompressed for a
ppc64_defconfig build (of which 2.4 MB is __init data) results in a ~500
KB space saving in the compressed image.

Since it is useful for some architectures (like x86) to retain the
ability to emit absolute values as well, this patch also adds support
for capturing both absolute and relative values when
KALLSYMS_ABSOLUTE_PERCPU is in effect, by emitting absolute per-cpu
addresses as positive 32-bit values, and addresses relative to the
lowest encountered relative symbol as negative values, which are
subtracted from the runtime address of this base symbol to produce the
actual address.

Support for the above is enabled by default for all architectures except
IA-64 and Tile-GX, whose symbols are too far apart to capture in this
manner.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 16:55:16 -07:00
Ard Biesheuvel 4d5d5664c9 x86: kallsyms: disable absolute percpu symbols on !SMP
scripts/kallsyms.c has a special --absolute-percpu command line option
which deals with the zero based per cpu offsets that are used when
building for SMP on x86_64.  This means that the option should only be
passed in that case, so add a Kconfig symbol with the correct predicate,
and use that instead.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 16:55:16 -07:00
Ard Biesheuvel a043934207 scripts/link-vmlinux.sh: force error on kallsyms failure
Since the output of the invocation of scripts/kallsyms is piped directly
into the assembler, error messages it emits are visible on stderr, but
a non-zero return code is ignored, and the build simply proceeds in that
case. However, the resulting kernel is most likely broken, and will crash
at boot.

So instead, capture the output of kallsyms in a separate .S file, and pass
that to the assembler in a separate step.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-02-08 20:45:09 +01:00
Vegard Nossum a7df4716d1 um: link with -lpthread
Similarly to commit fb1770aa78, with gcc 5
on Ubuntu and CONFIG_STATIC_LINK=y I was seeing these linker errors:

/usr/lib/gcc/x86_64-linux-gnu/5/../../../x86_64-linux-gnu/librt.a(timer_create.o): In function `__timer_create_new':
(.text+0xcd): undefined reference to `pthread_once'
/usr/lib/gcc/x86_64-linux-gnu/5/../../../x86_64-linux-gnu/librt.a(timer_create.o): In function `__timer_create_new':
(.text+0x126): undefined reference to `pthread_attr_init'
/usr/lib/gcc/x86_64-linux-gnu/5/../../../x86_64-linux-gnu/librt.a(timer_create.o): In function `__timer_create_new':
(.text+0x168): undefined reference to `pthread_attr_setdetachstate'
[...]

Obviously we also need -lpthread for librt.a.

Cc: stable@vger.kernel.org # 4.4
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2016-01-10 21:49:48 +01:00
Lorenzo Colitti fb1770aa78 arch: um: fix error when linking vmlinux.
On gcc Ubuntu 4.8.4-2ubuntu1~14.04, linking vmlinux fails with:

arch/um/os-Linux/built-in.o: In function `os_timer_create':
/android/kernel/android/arch/um/os-Linux/time.c:51: undefined reference to `timer_create'
arch/um/os-Linux/built-in.o: In function `os_timer_set_interval':
/android/kernel/android/arch/um/os-Linux/time.c:84: undefined reference to `timer_settime'
arch/um/os-Linux/built-in.o: In function `os_timer_remain':
/android/kernel/android/arch/um/os-Linux/time.c:109: undefined reference to `timer_gettime'
arch/um/os-Linux/built-in.o: In function `os_timer_one_shot':
/android/kernel/android/arch/um/os-Linux/time.c:132: undefined reference to `timer_settime'
arch/um/os-Linux/built-in.o: In function `os_timer_disable':
/android/kernel/android/arch/um/os-Linux/time.c:145: undefined reference to `timer_settime'

This is because -lrt appears in the generated link commandline
after arch/um/os-Linux/built-in.o. Fix this by removing -lrt from
arch/um/Makefile and adding it to the UM-specific section of
scripts/link-vmlinux.sh.

Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-12-08 22:25:13 +01:00
Maxime Coquelin cc84753052 scripts: link-vmlinux: Don't pass page offset to kallsyms if XIP Kernel
When Kernel is executed in place from ROM, the symbol addresses can be
lower than the page offset.

Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-05-21 19:17:44 +08:00
Sylvain BERTRAND ab160dbbc4 scripts: fix link-vmlinux.sh bash-ism
While building linux with dash shell:
  LINK    vmlinux
trap: SIGHUP: bad trap
/src/linux-4.0/Makefile:933: recipe for target 'vmlinux' failed
make[1]: *** [vmlinux] Error 1

See the following document for behavior of posix shell trap instruction:
http://pubs.opengroup.org/onlinepubs/000095399/utilities/trap.html

Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sylvain BERTRAND <sylvain.bertrand@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-05-07 12:42:03 +02:00
Michal Marek 06ed5c2bfa kbuild: Make scripts executable
The Makefiles call the respective interpreter explicitly, but this makes
it easier to use the scripts manually.

Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-08-20 16:03:45 +02:00
Rusty Russell c6bda7c988 kallsyms: fix percpu vars on x86-64 with relocation.
x86-64 has a problem: per-cpu variables are actually represented by
their absolute offsets within the per-cpu area, but the symbols are
not emitted as absolute.  Thus kallsyms naively creates them as offsets
from _text, meaning their values change if the kernel is relocated
(especially noticeable with CONFIG_RANDOMIZE_BASE):

 $ egrep ' (gdt_|_(stext|_per_cpu_))' /root/kallsyms.nokaslr
 0000000000000000 D __per_cpu_start
 0000000000004000 D gdt_page
 0000000000014280 D __per_cpu_end
 ffffffff810001c8 T _stext
 ffffffff81ee53c0 D __per_cpu_offset
 $ egrep ' (gdt_|_(stext|_per_cpu_))' /root/kallsyms.kaslr1
 000000001f200000 D __per_cpu_start
 000000001f204000 D gdt_page
 000000001f214280 D __per_cpu_end
 ffffffffa02001c8 T _stext
 ffffffffa10e53c0 D __per_cpu_offset

Making them absolute symbols is the Right Thing, but requires fixes to
the relocs tool.  So for the moment, we add a --absolute-percpu option
which makes them absolute from a kallsyms perspective:

 $ egrep ' (gdt_|_(stext|_per_cpu_))' /proc/kallsyms # no KASLR
 0000000000000000 A __per_cpu_start
 000000000000a000 A gdt_page
 0000000000013040 A __per_cpu_end
 ffffffff802001c8 T _stext
 ffffffff8099b180 D __per_cpu_offset
 ffffffff809a3000 D __per_cpu_load
 $ egrep ' (gdt_|_(stext|_per_cpu_))' /proc/kallsyms # With KASLR
 0000000000000000 A __per_cpu_start
 000000000000a000 A gdt_page
 0000000000013040 A __per_cpu_end
 ffffffff89c001c8 T _stext
 ffffffff8a39d180 D __per_cpu_offset
 ffffffff8a3a5000 D __per_cpu_load

Based-on-the-original-screenplay-by: Andy Honig <ahonig@google.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Kees Cook <keescook@chromium.org>
2014-03-17 14:55:27 +10:30
Ming Lei 7122c3e915 scripts/link-vmlinux.sh: only filter kernel symbols for arm
Actually CONFIG_PAGE_OFFSET isn't same with PAGE_OFFSET, so
it isn't easy to figue out PAGE_OFFSET defined in header
file from scripts.

Because CONFIG_PAGE_OFFSET may not be defined in some ARCHs(
64bit ARCH), or defined as bogus value in !MMU case, so
this patch only applys the filter on ARM when CONFIG_PAGE_OFFSET
is defined as the original problem is only on ARM.

Cc: <stable@vger.kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Fixes: f6537f2f0e
Singed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-12-10 16:49:19 +10:30
Ming Lei f6537f2f0e scripts/kallsyms: filter symbols not in kernel address space
This patch uses CONFIG_PAGE_OFFSET to filter symbols which
are not in kernel address space because these symbols are
generally for generating code purpose and can't be run at
kernel mode, so we needn't keep them in /proc/kallsyms.

For example, on ARM there are some symbols which may be
linked in relocatable code section, then perf can't parse
symbols any more from /proc/kallsyms, this patch fixes the
problem (introduced b9b32bf70f)

Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@vger.kernel.org
2013-11-02 09:13:02 +10:30
Rusty Russell b92021b09d CONFIG_SYMBOL_PREFIX: cleanup.
We have CONFIG_SYMBOL_PREFIX, which three archs define to the string
"_".  But Al Viro broke this in "consolidate cond_syscall and
SYSCALL_ALIAS declarations" (in linux-next), and he's not the first to
do so.

Using CONFIG_SYMBOL_PREFIX is awkward, since we usually just want to
prefix it so something.  So various places define helpers which are
defined to nothing if CONFIG_SYMBOL_PREFIX isn't set:

1) include/asm-generic/unistd.h defines __SYMBOL_PREFIX.
2) include/asm-generic/vmlinux.lds.h defines VMLINUX_SYMBOL(sym)
3) include/linux/export.h defines MODULE_SYMBOL_PREFIX.
4) include/linux/kernel.h defines SYMBOL_PREFIX (which differs from #7)
5) kernel/modsign_certificate.S defines ASM_SYMBOL(sym)
6) scripts/modpost.c defines MODULE_SYMBOL_PREFIX
7) scripts/Makefile.lib defines SYMBOL_PREFIX on the commandline if
   CONFIG_SYMBOL_PREFIX is set, so that we have a non-string version
   for pasting.

(arch/h8300/include/asm/linkage.h defines SYMBOL_NAME(), too).

Let's solve this properly:
1) No more generic prefix, just CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX.
2) Make linux/export.h usable from asm.
3) Define VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR().
4) Make everyone use them.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Tested-by: James Hogan <james.hogan@imgtec.com> (metag)
2013-03-15 15:09:43 +10:30
Michal Marek 423a8155fa kbuild: Fix reading of .config in link-vmlinux.sh
The shell '.' command is not required to search the current directory as
a fallback and in fact newer versions of bash in sh-mode do not do this.
Force reading the file from the current directory if $KCONFIG_CONFIG
contains no '/'.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-02-25 16:14:48 +01:00
Michael Grzeschik 03b25b47e0 scripts/link-vmlinux.sh: source variables from KCONFIG_CONFIG
Its possible to superseed the config file with KCONFIG_CONFIG and have
completely no .config in the tree. The current script is sourcing
.config in every case, so the kernel will never build succesfully. This
patch fixes that issue by sourcing KCONFIG_CONFIG instead.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-02-22 10:37:18 +01:00
Linus Torvalds 2a1497c3c4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin
Pull blackfin updates from Bob Liu:
 "One kbuild and a smp build fix."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin:
  kbuild: add symbol prefix arg to kallsyms
  blackfin: smp: adapt to generic smp helpers
2012-09-12 07:12:53 +08:00
James Hogan 6895f97e15 kbuild: add symbol prefix arg to kallsyms
Commit 1f2bfbd00e ("kbuild: link of
vmlinux moved to a script") introduced in v3.5-rc1 broke kallsyms on
architectures which have symbol prefixes.

The --symbol-prefix argument used to be added to the KALLSYMS command
line from the architecture Makefile, however this isn't picked up by the
new scripts/link-vmlinux.sh. This resulted in symbols like
kallsyms_addresses being added which weren't correctly overriding the
weak symbols such as _kallsyms_addresses. These could then trigger
BUG_ONs in kallsyms code.

This is fixed by removing the KALLSYMS addition from the architecture
Makefile, and using CONFIG_SYMBOL_PREFIX in the link-vmlinux.sh script
to determine whether to add the --symbol-prefix argument.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-09-11 10:25:12 +08:00
Michal Marek 367e43c50d link-vmlinux.sh: Fix stray "echo" in error message
Reported-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-08-10 11:55:11 +02:00
Michal Marek 5369f55021 kbuild: Print errors to stderr
... at least in the top-level Makefile and scripts/link-vmlinux.sh.
There are some more instances of the 'echo <error>; exit 1' pattern in
some arch Makefiles and kconfig.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-07-07 23:33:31 +02:00
Linus Torvalds 1347a2cebc Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild updates from Michal Marek.

Fixed up nontrivial merge conflict in Makefile as per Stephen Rothwell
and linux-next (and trivial arch/sparc/Makefile changes due to removed
sparc32 logic).

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  mips: Fix KBUILD_CPPFLAGS definition
  kbuild: fix ia64 link
  kbuild: document KBUILD_LDS, KBUILD_VMLINUX_{INIT,MAIN} and LDFLAGS_vmlinux
  kbuild: link of vmlinux moved to a script
  kbuild: refactor final link of sparc32
  kbuild: drop unused KBUILD_VMLINUX_OBJS from top-level Makefile
  kbuild: Makefile: remove unnecessary check for m68knommu ARCH
2012-05-28 10:32:28 -07:00
Sam Ravnborg 00e6c28c68 kbuild: fix ia64 link
ia64 build failed like this:

  CC      init/version.o
  LD      init/built-in.o
  KSYM    .tmp_kallsyms1.o
ld: .tmp_kallsyms1.o: linking constant-gp files with non-constant-gp files
ld: failed to merge target specific data of file .tmp_kallsyms1.o
make: *** [vmlinux] Error 1

This was introduced when link of vmlinux was migrated to a script.
Add missing option to as to fix this.

Reported-by: Tony Luck <tony.luck@gmail.com>
Tested-by: Tony Luck <tony.luck@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-05-10 14:09:21 +02:00
Sam Ravnborg 1f2bfbd00e kbuild: link of vmlinux moved to a script
Move the final link of vmlinux to a script to improve
readability and maintainability of the code.

The Makefile fragments used to link vmlinux has over the
years seen far too many changes and the logic had become
hard to follow.

As the process by nature is serialized there was
nothing gained including this in the Makefile.

"um" has special link requirments - and the
only way to handle this was to hard-code the linking
of "um" in the script.
This was better than trying to modularize it only for the
benefit of "um" anyway.

The shell script has been improved after input from:
Arnaud Lacombe <lacombar@gmail.com>
Nick Bowler <nbowler@elliptictech.com>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Arnaud Lacombe <lacombar@gmail.com>
Cc: Nick Bowler <nbowler@elliptictech.com>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-05-05 21:19:33 +02:00