Commit Graph

7 Commits

Author SHA1 Message Date
Namjae Jeon 94c122ab01 [SCSI] ufs: fix incorrect return value about SUCCESS and FAILED
Currently the UFS host driver has returned incorrect values for SUCCESS
and FAILED.  Fix it to return the correct value to the upper layer.

Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Acked-by: Santosh Y <santoshsy@gmail.com>
Signed-off-by: Venkatraman S <svenkatr@ti.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20 08:59:02 +01:00
Venkatraman S 73ec513a3b [SCSI] ufs: reverse the ufshcd_is_device_present logic
Otherwise it counter intuitively returns 0 if device is present.

Signed-off-by: Venkatraman S <svenkatr@ti.com>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Acked-by: Santosh Y <santoshsy@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20 08:59:01 +01:00
Venkatraman S 17ccafc4ef [SCSI] ufs: use module_pci_driver
Use macro module_pci_driver and get rid of boilerplate code.  No
functional changes.

Signed-off-by: Venkatraman S <svenkatr@ti.com>
Acked-by: Santosh Y <santoshsy@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20 08:59:01 +01:00
Namjae Jeon 4886b1afee [SCSI] ufs: fix potential NULL pointer dereferencing error in ufshcd_prove.
Avoid dereferencing a NULL pointer if scsi_host_alloc is failed.

Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-23 09:29:39 +01:00
Santosh Yaraganavi 85bb4457ef [SCSI] ufs: Assign UTRLBAU = upper_32_ bits(UTRLD base address)
UTP Transfer request list base registers UTRLBA and UTRLBAU
must be assigned, lower-32 and upper-32 bits of UTRLD list
physical base addresses respectively.

Currently UTRLBAU is being assigned lower-32 bits of UTRLD
physical base address. This will cause an issue with
controllers that can support 64-bit addressing.

This patch correctly assigns upper-32 bits of UTRLD physical
base address to UTRLBAU.

Reported-by: Rene De Jong <rene.dejong@arm.com>
Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com>
Reviewed-by: Vinayak Holikatti <vinholikatti@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-10 08:59:26 +01:00
Venkatraman S fd0f8370c8 [SCSI] ufs: Fix evaluation of UTP task completion code
While interpreting the result of UTP task completion status,
by using boolean &&, the evaluation would fail when the
UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED was received.

Either UPIU_TASK_MANAGEMENT_FUNC_COMPL or
UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED should be
considered as a success result.

Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Venkatraman S <svenkatr@ti.com>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Acked-by: Santosh Y <santoshsy@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-10 08:59:24 +01:00
Santosh Yaraganavi 7a3e97b0dc [SCSI] ufshcd: UFS Host controller driver
This patch adds support for Universal Flash Storage(UFS)
host controllers. The UFS host controller driver
includes host controller initialization method.

The Initialization process involves following steps:
 - Initiate UFS Host Controller initialization process by writing
   to Host controller enable register
 - Configure UFS Host controller registers with host memory space
   datastructure offsets.
 - Unipro link startup procedure
 - Check for connected device
 - Configure UFS host controller to process requests
 - Enable required interrupts
 - Configure interrupt aggregation

[jejb: fix warnings in 32 bit compile]
Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com>
Signed-off-by: Vinayak Holikatti <vinholikatti@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@linaro.org>
Reviewed-by: Vishak G <vishak.g@samsung.com>
Reviewed-by: Girish K S <girish.shivananjappa@linaro.org>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27 08:26:28 +01:00