Commit Graph

538 Commits

Author SHA1 Message Date
Daniel Mack ca749b2a2e usb: musb: dsps: fix res_name length
The res_name is used for the name construction of a DT property as
follows:

  sprintf(res_name, "port%d-mode", id);

Hence, res_name must be at least 11 characters long in order to store
the name including the terminating '\0'.

While at it, use to snprintf() rather than sprintf() when accessing this
buffer.

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-23 09:42:29 +03:00
Stefano Babic 6ff1f3d3bd usb: musb: am35xx: drop spurious unplugging a device
On AM3517, tx and rx interrupt are detected together with
the disconnect event. This generates a kernel panic in musb_interrupt,
because rx / tx are handled after disconnect.
This issue was seen on a Technexion's TAM3517 SOM. Unplugging a device,
tx / rx interrupts together with disconnect are detected. This brings
to kernel panic like this:

[   68.526153] Unable to handle kernel NULL pointer dereference at virtual address 00000011
[   68.534698] pgd = c0004000
[   68.537536] [00000011] *pgd=00000000
[   68.541351] Internal error: Oops: 17 [#1] ARM
[   68.545928] Modules linked in:
[   68.549163] CPU: 0    Not tainted  (3.6.0-rc5-00020-g9e05905 #178)
[   68.555694] PC is at rxstate+0x8/0xdc
[   68.559539] LR is at musb_interrupt+0x98/0x858
[   68.564239] pc : [<c035cd88>]    lr : [<c035af1c>]    psr: 40000193
[   68.564239] sp : ce83fb40  ip : d0906410  fp : 00000000
[   68.576293] r10: 00000000  r9 : cf3b0e40  r8 : 00000002
[   68.581817] r7 : 00000019  r6 : 00000001  r5 : 00000001  r4 : 000000d4
[   68.588684] r3 : 00000000  r2 : 00000000  r1 : ffffffcc  r0 : cf23c108
[   68.595550] Flags: nZcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment ke

Note: this behavior is not seen with a USB hub, while it is
easy to reproduce connecting a USB-pen directly to the USB-A of
the board.

Drop tx / rx interrupts if disconnect is detected.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Felipe Balbi <balbi@ti.com>
Cc: stable@vger.kernel.org # 3.5 3.6
Tested-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Tested-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-15 15:20:27 +03:00
Linus Torvalds 1ea4f4f840 Xtensa patchset for 3.7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQc6WkAAoJEI9vqH3mFV2s+S8P/0cQ2xBgjNQBNsdSMuUAnlla
 km54KLyzcT/FEDgLN7LGJqnCHhDEem6swQjsOnUlvnF+4jr/LTCvjY/SbLYiD+8E
 ahOo+YYhLuY9Vyv+V1TO7y1VcQw11+xZOunm10f89myaodXY9jO/pt16N/TTYg+O
 a24viZDrDR+Q+BR4bIQe4ySKNuT2mmFmO3jP6F1iL/Cin8nXl+4UwY3fqyNRfnhH
 p0UngGxQvzgWDyYqBus2DJbRAjudEpoKVBE+8y2ABFanFTQ3pYoFxeROPA9Uup/S
 o/kv8bIKJSQMlEcoviE3oNyK56QyeJe+H0VsZi5gLvOAauAsAeneY6MD/5MsNIej
 9phJa1LDjobZ3AqaQFcHUZDzMHMVdp0DR7zCOjdVxan0+kC/JK4tAdBD8mwkYWco
 Nt0w986k16hSa3u43q5ArdDxnePOkgN63hc+GhCgvsYWcqV3xEBGbMlUls46zwjR
 4ouPCJ+c92NzLHAnylx3Zti5hHbmeNgKrC8kCm1PXZ9XG8OP3Emw97TFQkf+JVYG
 Xsj6RhK8ZLg8atI+nNkpnVByo5ecJaFkIPJnUS3DqEk4AoQiYP1CRDTPy0eF6wIR
 qvyRyudhkdO6FSUBw4aBnEEhlhsgYdwcfI+obk2to9vtLCFKsfPtlVD7G7UDpCmT
 pQO7yVhEMsKuq29+FOLS
 =14Zt
 -----END PGP SIGNATURE-----

Merge tag 'xtensa-next-20121008' of git://github.com/czankel/xtensa-linux

Pull Xtensa patchset from Chris Zankel:
 "The Xtensa tree has been broken for some time now, and this patchset
  brings it back to life.  It has been part of the linux-next tree for
  some time.

  Most changes are inside the xtensa subdirectory; the other changes
  mostly add another rule to already existing #ifdefs to exclude Xtensa,
  where required.  The only 'common' change is to add two more sections
  ('.xt.prop' and '.xt.lit') to the white list in modpost."

* tag 'xtensa-next-20121008' of git://github.com/czankel/xtensa-linux: (27 commits)
  xtensa: Setup CROSS_COMPILE at the top
  xtensa: drop CONFIG_EMBEDDED_RAMDISK
  xtensa: fix TIOCGSERIAL and TIOCSSERIAL definitions
  xtensa: provide dummy gcc intrinsics
  xtensa: add missing symbol exports
  parport: disable for xtensa arch
  xtensa: rename MISC SR definition to avoid name clashes
  hisax: disable build for big-endian xtensa
  xtensa: fix CODA build
  xtensa: fix parallel make
  xtensa: ISS: drop unused io.c
  xtensa: ISS: exit simulator in case of halt or poweroff
  xtensa: ISS: change keyboard polling rate
  xtensa: ISS: add platform_pcibios_init
  xtensa: ISS: add dummy serial.h for ISS platform
  xtensa: change default platform clock frequency to 10MHz
  xtensa: add ARCH_WANT_OPTIONAL_GPIOLIB to xtensa config
  xtensa: set NO_IOPORT to 'n' by default
  xtensa: adopt generic io routines
  xtensa: fix ioremap
  ...
2012-10-09 16:11:46 +09:00
Max Filippov d38efc1f15 xtensa: adopt generic io routines
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-03 15:11:42 -07:00
Linus Torvalds 9cd11c0c47 ARM: soc: multiplatform enablement
This is a pretty significant branch. It's the introduction of the
 first multiplatform support on ARM, and with this (and the later
 branch) merged, it is now possible to build one kernel that contains
 support for highbank, vexpress, mvebu, socfpga, and picoxcell. More
 platforms will be convered over in the next few releases.
 
 Two critical last things had to be done for this to be practical and
 possible:
 * Today each platform has its own include directory under
   mach-<mach>/include/mach/*, and traditionally that is where a lot of
   driver/platform shared definitions have gone, such as platform data
   structures. They now need to move out to a common location instead,
   and this branch moves a large number of those out to
   include/linux/platform_data.
 * Each platform used to list the device trees to compile for its
   boards in mach-<mach>/Makefile.boot.
 
 Both of the above changes will mean that there are some merge
 conflicts to come (and some to resolve here). It's a one-time move and
 once it settles in, we should be good for quite a while. Sorry for the
 overhead.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO7aAAoJEIwa5zzehBx3bUIP/02U8PhkHJJrrowyIsWRBOql
 7LPJ53PRRgrpBdmEGzFD3TO3zaNyrjQRbYgNDvzHMO6NAMNvdRFouuWYjO11/tuB
 i32zssXCC+eUOEgbAo/U/lYq+UOvqw9gv6mU+3+i3OcGEhdKOaoT/DSLPQC4hoDm
 222TeLfFB3HJXu5n720dEQ9V3fO6TS1+bbh8TU3cjHqzceXsOrffZqOA5CQxUcRr
 KWwOjA0nALDwWcqgv45GJNwY3GTyAQ/hPMQavnuWK0voJ+qUYk5HftKocAK7C+py
 0T0OFOAHTwtyhvzJBxLC84M6Ox465BYXyeNjIB+2nG/Um9+mDoP0dnWpGy4c7DMU
 P5hyqbeLGeqjUXQuYtRmgMMc3UeHKoUGAfXW9eMsjLa6/M4NLGv//7E7LbZPpgMZ
 obkjwuesmcaYn/FRyj/yFmC35YlF4oCLziVzEtURZw3eKHHSUlhkTDSMNnkcZ0kZ
 Vv7kFxnD2Y46ixiwSJv30ErQnVkgI3MdqDlDxkE8r5+phYuK4gCrNaJtiwRh/oNw
 cFhpPxKuA0sJ9b6YRTzjC45eT/XZomEEr/uifCFeRNaCquyjYP00Mm8F0flSqwx9
 zi+emzPAwNmk1bvxMUM/idGnaj0V4p+BAYUAvkbSoqU1p1flzyhU88fGTSIyKOt6
 K5TCDS2v5hrVykK9TDwl
 =Tc6y
 -----END PGP SIGNATURE-----

Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc multiplatform enablement from Olof Johansson:
 "This is a pretty significant branch.  It's the introduction of the
  first multiplatform support on ARM, and with this (and the later
  branch) merged, it is now possible to build one kernel that contains
  support for highbank, vexpress, mvebu, socfpga, and picoxcell.  More
  platforms will be convered over in the next few releases.

  Two critical last things had to be done for this to be practical and
  possible:
   * Today each platform has its own include directory under
     mach-<mach>/include/mach/*, and traditionally that is where a lot
     of driver/platform shared definitions have gone, such as platform
     data structures.  They now need to move out to a common location
     instead, and this branch moves a large number of those out to
     include/linux/platform_data.
   * Each platform used to list the device trees to compile for its
     boards in mach-<mach>/Makefile.boot.

  Both of the above changes will mean that there are some merge
  conflicts to come (and some to resolve here).  It's a one-time move
  and once it settles in, we should be good for quite a while.  Sorry
  for the overhead."

Fix conflicts as per Olof.

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits)
  ARM: add v7 multi-platform defconfig
  ARM: msm: Move core.h contents into common.h
  ARM: highbank: call highbank_pm_init from .init_machine
  ARM: dtb: move all dtb targets to common Makefile
  ARM: spear: move platform_data definitions
  ARM: samsung: move platform_data definitions
  ARM: orion: move platform_data definitions
  ARM: vexpress: convert to multi-platform
  ARM: initial multiplatform support
  ARM: mvebu: move armada-370-xp.h in mach dir
  ARM: vexpress: remove dependency on mach/* headers
  ARM: picoxcell: remove dependency on mach/* headers
  ARM: move all dtb targets out of Makefile.boot
  ARM: picoxcell: move debug macros to include/debug
  ARM: socfpga: move debug macros to include/debug
  ARM: mvebu: move debug macros to include/debug
  ARM: vexpress: move debug macros to include/debug
  ARM: highbank: move debug macros to include/debug
  ARM: move debug macros to common location
  ARM: make mach/gpio.h headers optional
  ...
2012-10-01 19:11:38 -07:00
Linus Torvalds 61464c8357 ARM: soc: general cleanups
This is a large branch that contains a handful of different cleanups:
 
 - Fixing up the I/O space remapping on PCI on ARM. This is a series
   from Rob Herring that restructures how all pci devices allocate I/O
   space, and it's part of the work to allow multiplatform kernels.
 - A number of cleanup series for OMAP, moving and removing some
   headers, sparse irq rework and in general preparation for
   multiplatform.
 - Final removal of all non-DT boards for Tegra, it is now
   device-tree-only!
 - Removal of a stale platform, nxp4008. It's an old mobile chipset
   that is no longer in use, and was very likely never really used with
   a mainline kernel. We have not been able to find anyone interested
   in keeping it around in the kernel.
 - Removal of the legacy dmaengine driver on tegra
 
 + A handful of other things that I haven't described above.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO1fAAoJEIwa5zzehBx3IPgP/jxoO1flVGNVf0reqqyDro/w
 prZmp8cNVH9uv8xG9n9vawObrMQ8M6jCJ449fEWuAZ58EXrpIPd0kkm/MOmxp8K1
 LNs+q2aXxWpD488+b3RK55g3fksqZutTbn3y6HNuCoLG9l8yT/95KX4IIzfEP2Ch
 1TCNHdkTbf37nTBOmKN0x1kahGpWDrOkf9ysHQq+DXAGF4uwNwtR194dqz3HbDND
 hZqRq7qCLn9OwGRGNicPFoB6UcxwZ/+/+u5sX7nqPGoiPofg977mhWk1DFO15EM3
 S+A6g0dZ+XLsL+fFtOl4snSmrG5Et6qTOP0/ItQJgTG+5YdCS09ohCWJwRCBHbgj
 M5arOkyGFdVAlvX7cUux374sMe0AcqUsEmt79mYuBpIE+pBJaRUoCgDcs9FDZeUB
 U6WcE4AkxMtW7DtmVW+mF4ls9/K6cRXgWMuHCUmt1o3m3Ly9ITT7j+ntXnD9nuYk
 ndoVLR6Vxk2BzlkD0JEtg7FRAS9Wgo2DBix05qM1Qkut2iIZRhFQlqJQpNbeNdii
 /3Lg/hqpAVTZKGCd+paegHez61meyFz2PB2IiE0JKANhKHRCWTWRGgKIXkGyCiXk
 wJ2iRCOlMEpmpJgCBzfI32ER/hnW4s64iDjgksEwz6pEt7xCbhwgmwrpf0H0KsSF
 rLroHOMqyISd/Ha52Vin
 =ck1u
 -----END PGP SIGNATURE-----

Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc general cleanups from Olof Johansson:
 "This is a large branch that contains a handful of different cleanups:

   - Fixing up the I/O space remapping on PCI on ARM.  This is a series
     from Rob Herring that restructures how all pci devices allocate I/O
     space, and it's part of the work to allow multiplatform kernels.
   - A number of cleanup series for OMAP, moving and removing some
     headers, sparse irq rework and in general preparation for
     multiplatform.
   - Final removal of all non-DT boards for Tegra, it is now
     device-tree-only!
   - Removal of a stale platform, nxp4008.  It's an old mobile chipset
     that is no longer in use, and was very likely never really used
     with a mainline kernel.  We have not been able to find anyone
     interested in keeping it around in the kernel.
   - Removal of the legacy dmaengine driver on tegra

  + A handful of other things that I haven't described above."

Fix up some conflicts with the staging tree (and because nxp4008 was
removed)

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits)
  ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6
  ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus
  ARM: mmp: using for_each_set_bit to simplify the code
  ARM: tegra: harmony: fix ldo7 regulator-name
  ARM: OMAP2+: Make omap4-keypad.h local
  ARM: OMAP2+: Make l4_3xxx.h local
  ARM: OMAP2+: Make l4_2xxx.h local
  ARM: OMAP2+: Make l3_3xxx.h local
  ARM: OMAP2+: Make l3_2xxx.h local
  ARM: OMAP1: Move irda.h from plat to mach
  ARM: OMAP2+: Make hdq1w.h local
  ARM: OMAP2+: Make gpmc-smsc911x.h local
  ARM: OMAP2+: Make gpmc-smc91x.h local
  ARM: OMAP1: Move flash.h from plat to mach
  ARM: OMAP2+: Make debug-devices.h local
  ARM: OMAP1: Move board-voiceblue.h from plat to mach
  ARM: OMAP1: Move board-sx1.h from plat to mach
  ARM: OMAP2+: Make omap-wakeupgen.h local
  ARM: OMAP2+: Make omap-secure.h local
  ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local
  ...
2012-10-01 18:19:05 -07:00
Olof Johansson e3a66aa33a Merge branch 'multiplatform/platform-data' into next/multiplatform
* multiplatform/platform-data:
  ARM: spear: move platform_data definitions
  ARM: samsung: move platform_data definitions
  ARM: orion: move platform_data definitions
  ARM: nomadik: move platform_data definitions
  ARM: w90x900: move platform_data definitions
  ARM: vt8500: move platform_data definitions
  ARM: tegra: move sdhci platform_data definition
  ARM: sa1100: move platform_data definitions
  ARM: pxa: move platform_data definitions
  ARM: netx: move platform_data definitions
  ARM: msm: move platform_data definitions
  ARM: imx: move platform_data definitions
  ARM: ep93xx: move platform_data definitions
  ARM: davinci: move platform_data definitions
  ARM: at91: move platform_data definitions

Conflicts due to removed files:
	arch/arm/mach-tegra/board-harmony.c
	arch/arm/mach-tegra/board-trimslice.c

Conflicts due to code removal:
	arch/arm/mach-tegra/board-paz00.c

Context conflicts in:
	drivers/mmc/host/sdhci-tegra.c
	drivers/net/irda/pxaficp_ir.c

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-22 01:07:21 -07:00
Olof Johansson b97ba3ab4e This branch contains mostly scripted changes to make omap
header files local where possible to get us closer to supporting
 the ARM single zImage. After these changes mach includes are
 pretty much out of the way for omap2+, but still lots of manual
 work remains to sort through the remaining plat includes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQW5i3AAoJEBvUPslcq6Vzhf0P/295RFraSeKbgT0cc0GhjDsk
 a30tqn2B1yAKZcuoe9kAr7MR55pA5wm7C6neBsu0+DqrZZ7v5sczl6kkb4415fbb
 IgHZVL7ggeCKQaC2bq2bdbUSur2fj2uuIJoy5h6rfZFV5uuPeKggXI4PqrdgiBX9
 Y8C+dTzNpWLG7evoREs0E8yzFnSh1OKizcxXzCvYhCM6ObjlQVpePnSs/tpxd0mw
 4qmYc5QYTs7MEUzTxoyntQAYhE5vmTpLW4VrblWf/pCF2XnpIhn1I+sA8h4dte+i
 txYJaLmouz5a7YNiEEFYztSsjhOWH3tJ5nxLZjcLm8IOlMM11zMaeCr+G0j18288
 /ZMHNHdiwVk4RiG8WNk+gr0SM7nOEoqNsdMrIAmVt7P0QSasCBiZx/zh8JhmkNlX
 XBsUvAOXmx8k4coF4ZCJ3E/aoxQBTZozbS1m0YrnRHkWJoexfXhXPp05uPFnJTQ0
 bg6V6A12J9EWnHDAwN5JSkQCL35LR9+3KkxYnMZcq03Q2cfrQSyML0UYLTVPBKYa
 cDyRAyuWooho6k5hyJiaCP6B1U/UzC5JGRz7XQ6bwweGbEgzGVjnW/EF/IJp7sGo
 PzSRtb2WovCFNTywBhLLEnuHB+pKOvnflRn5KrNWkJfp5VDIzgaleMFBS98kn/tI
 +ekNhimXe/QAsWzvq99q
 =TZVo
 -----END PGP SIGNATURE-----

Merge tag 'omap-cleanup-local-headers-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

From Tony Lindgren:
This branch contains mostly scripted changes to make omap
header files local where possible to get us closer to supporting
the ARM single zImage. After these changes mach includes are
pretty much out of the way for omap2+, but still lots of manual
work remains to sort through the remaining plat includes.

* tag 'omap-cleanup-local-headers-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (26 commits)
  ARM: OMAP2+: Make omap4-keypad.h local
  ARM: OMAP2+: Make l4_3xxx.h local
  ARM: OMAP2+: Make l4_2xxx.h local
  ARM: OMAP2+: Make l3_3xxx.h local
  ARM: OMAP2+: Make l3_2xxx.h local
  ARM: OMAP1: Move irda.h from plat to mach
  ARM: OMAP2+: Make hdq1w.h local
  ARM: OMAP2+: Make gpmc-smsc911x.h local
  ARM: OMAP2+: Make gpmc-smc91x.h local
  ARM: OMAP1: Move flash.h from plat to mach
  ARM: OMAP2+: Make debug-devices.h local
  ARM: OMAP1: Move board-voiceblue.h from plat to mach
  ARM: OMAP1: Move board-sx1.h from plat to mach
  ARM: OMAP2+: Make omap-wakeupgen.h local
  ARM: OMAP2+: Make omap-secure.h local
  ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local
  ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h local
  ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h local
  ARM: OMAP2+: Make ctrl_module_core_44xx.h local
  ARM: OMAP2+: Make board-rx51.h local
  ...
2012-09-20 20:27:06 -07:00
Tony Lindgren 70c494c312 ARM: OMAP1: Make plat/mux.h omap1 only
We are moving omap2+ to use the device tree based pinctrl-single.c
and will be removing the old mux framework. This will remove the
omap1 specific parts from plat-omap.

Acked-by: Felipe Balbi <balbi@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-usb@vger.kernel.org
Cc: linux-pcmcia@lists.infradead.org
Cc: spi-devel-general@lists.sourceforge.net
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20 14:54:57 -07:00
Greg Kroah-Hartman 2bcb132c69 Merge 3.6-rc6 into usb-next
This resolves the merge problems with:
	drivers/usb/dwc3/gadget.c
	drivers/usb/musb/tusb6010.c
that had been seen in linux-next.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-16 20:42:46 -07:00
Arnd Bergmann db298da2c3 ARM: nomadik: move platform_data definitions
Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the nomadik include directories

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: STEricsson <STEricsson_nomadik_linux@list.st.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Andreas Westin <andreas.westin@stericsson.com>
2012-09-14 11:19:00 +02:00
Arnd Bergmann ec2a0833e5 ARM: davinci: move platform_data definitions
Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the davinci include directories

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: "Ben Dooks" <ben-linux@fluff.org>
Cc: "Wolfram Sang" <w.sang@pengutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Liam Girdwood <lrg@ti.com>
Cc: davinci-linux-open-source@linux.davincidsp.com
2012-09-14 11:16:54 +02:00
Greg Kroah-Hartman 1cd572fc0c usb: musb: patches for v3.7 merge window
Here we have a bunch of miscellaneous cleanups and fixes
 to the musb driver. It fixes a bunch of mistakes errors
 which nobody has triggered before, so I'm not Ccing stable
 tree.
 
 We are finally improving OMAP's VBUS/ID Mailbox usage so
 that we can introduce our PHY drivers properly. Also, we're
 adding support for multiple instances of the MUSB IP in
 the same SoC, as seen on some platforms from TI which
 have 2 MUSB instances.
 
 Other than that, we have some small fixes like not kicking
 DMA for a zero byte transfer, or properly handling NAK timeout
 on MUSB's host side, and the enabling of DMA Mode1 for any
 transfers which are aligned to wMaxPacketSize.
 
 All patches have been pending on mailing list for a long time
 and I don't expect any big surprises with this pull request.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQT1XLAAoJEIaOsuA1yqREsfMP/jae2huECuECrWtm76TNm6Kl
 +1Movls2IkrYuVIM/QzSSqrmQ0BUVyOYjf1Uuke3tFA1KwkZsITZ12UONokiUGDd
 EuPP0RfXSiwdVNWF6cyJ8PiT5JWXD2fRJn3L22pXSiA4MvocLXM0yJiHrsM5q3Hd
 idg2npo7LEbLI3y1NDRdzR36Gk3y3K40U/ovXSQQQilhyk4yv7wpSbLqOR1UkkN/
 Xcf2FiRb1xFYRdu1HoSHRnIW0CmC2a8MbpAcOuUSoPqH5HIiouA0Cc4Wt5xki4y3
 +e0D0xpGK/Kt42nDkNoi51TaCw6aSY+GOqEFcI96o2/pq819nlcAzOGI77WGQIXX
 sLud3oYsESdc++ux1+jaEX9xju41NyzColxDHn4AnplYF2t4fbTd36Loxed9xco/
 LzHaaK3v1Ll30XiRiEnO5RBcgcwXDfFCMOUIDyVaVqNgCuYRrJIuhoXdlXvhEHAt
 GQjFn/+8izIncVZ2rPQ1H2thshlmVWgrZ4kEwnbKLYtv2sqAVHBN/iaN25iQlm/l
 Jva8ecXKl+9n92++X7vL8X/OmdVecBLey9eoqS+C+a0Kn9pSedOlUgkYpz8lGL38
 dBPZ5Zjukl7J+gQ45ol5IN3cuYA+QcAZjHR1VEkeR7otAY5xsEun7vmyBoY4qazz
 rUGhbofXB1gtGhUaaDBj
 =UHPu
 -----END PGP SIGNATURE-----

Merge tag 'musb-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

usb: musb: patches for v3.7 merge window

Here we have a bunch of miscellaneous cleanups and fixes
to the musb driver. It fixes a bunch of mistakes errors
which nobody has triggered before, so I'm not Ccing stable
tree.

We are finally improving OMAP's VBUS/ID Mailbox usage so
that we can introduce our PHY drivers properly. Also, we're
adding support for multiple instances of the MUSB IP in
the same SoC, as seen on some platforms from TI which
have 2 MUSB instances.

Other than that, we have some small fixes like not kicking
DMA for a zero byte transfer, or properly handling NAK timeout
on MUSB's host side, and the enabling of DMA Mode1 for any
transfers which are aligned to wMaxPacketSize.

All patches have been pending on mailing list for a long time
and I don't expect any big surprises with this pull request.
2012-09-11 13:56:29 -07:00
Greg Kroah-Hartman dcb9cf39c5 usb: xceiv: patches for v3.7 merge window
nop xceiv got its own header to avoid polluting otg.h. It has also
 learned to work as USB2 and USB3 phys so we can use it on USB3
 controllers.
 
 Together with those two changes to nop xceiv, we're adding basic
 PHY support to dwc3 driver, this is to allow platforms which actually
 have a SW-controllable PHY talk to them through dwc3 driver.
 
 We're adding a new phy driver for the OMAP architecture. This driver
 is for the PHY found in OMAP4 SoCs, and a new phy driver for the
 marvell architecture. An extra phy driver - for Tegra SoCs - is now
 moving from arch/arm/mach-tegra* to drivers/usb/phy.
 
 Also here, there's the creation of <linux/usb/phy.h> which should be
 used from now on for PHY drivers, even those which don't support
 OTG.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQThmRAAoJEIaOsuA1yqRE2U4P+gJHJsQZUIqTkCi6GyutMLUX
 HUYVgaCXAbt4sSB5s0OK7AsB8uQ82GO6ZGyPfxNlYr6LXYlQWZ1OIig8PNhyn4en
 lt0TolGL53fDOrwvQ0MIJBB1rgCk81UoFwJaPYkhKDNQLndl4hxlrFTsAvaIu7H0
 pMMLt3E0Jz7018NxvVN23OV3EXnb2GF9K2Jt/NJNkZPanJaWXz0T/6DvBG24du2x
 t3ALiKnpAC51wHPB5T88tefmVNApz7DPwK/Bm/VKW66LZ61Y+nZtZ+QMxj//uTt9
 c3JXCvGscKSBcSfSFNMeYBdiPOZIFXTRVLr7CzxplvY9j5u8DTGArz5nvj/8ajbW
 OeU0DMMaStfFqd12/BFUQeixbH8NUSoR5luWVMzBhB5+MF493gHvsu2ooorpR2hP
 jQgMY146RdVbXNDJmuLRlVZbHQZfJBqvVUpk+3mdSSOtpy4IpKvlzPkYL1YjyOMt
 x8WF+shSBvOMhg5C/HlGbDLzTiTv8zWef/aJ7OP9yUwYIz/map3lax749+M0Yzcj
 trQgbLYrc8OeMVuCYGqjw1m96/YmcIxvzI/OnAMPbrPxK2hjy5jAu64/gOAZiZNY
 oQis5G5qw/24LkXfLNQFTl8nYmaDko03+wazCg39D11bWZbLgKs9YJPZd78EwpJy
 s+gU0+RYAQHgo+EChLY+
 =/qVp
 -----END PGP SIGNATURE-----

Merge tag 'xceiv-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

usb: xceiv: patches for v3.7 merge window

nop xceiv got its own header to avoid polluting otg.h. It has also
learned to work as USB2 and USB3 phys so we can use it on USB3
controllers.

Together with those two changes to nop xceiv, we're adding basic
PHY support to dwc3 driver, this is to allow platforms which actually
have a SW-controllable PHY talk to them through dwc3 driver.

We're adding a new phy driver for the OMAP architecture. This driver
is for the PHY found in OMAP4 SoCs, and a new phy driver for the
marvell architecture. An extra phy driver - for Tegra SoCs - is now
moving from arch/arm/mach-tegra* to drivers/usb/phy.

Also here, there's the creation of <linux/usb/phy.h> which should be
used from now on for PHY drivers, even those which don't support
OTG.
2012-09-11 13:48:01 -07:00
Greg Kroah-Hartman 7135f08e47 usb: gadget: patches for v3.7 merge window
This pull request is large but the biggest part is the first part
 of the cleanup on the gadget framework so we have a saner setup
 to add configfs support for v3.8.
 
 We have also some more conversions to the new udc_start/udc_stop
 which makes us closer from dropping the old interfaces.
 
 USB_GADGET_DUALSPEED and USB_GADGET_SUPERSPEED are finally gone,
 thanks to Michal for his awesome work.
 
 Other than that, we have the usual set of miscellaneous changes
 and cleanups involving improvements to debug messages, removal
 of duplicated includes, moving dereference after NULL test,
 making renesas_hsbhs' irq handler Shared, unused code being dropped,
 prevention of sleep-inside-spinlock bugs and a race condition fix
 on udc-core.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQTh3DAAoJEIaOsuA1yqRE+DIQAIwDRDojG3WLpMq7RJJQclS6
 4Uk1wkim/DxlJsXDvhGd/Qecr6Gk8HSX6hFBg0u2t9g5csl42kTa7PGCN8XSgAC9
 yekqDbjewkdTy5ar6y06LfFObiq3ubL489AW1p0Sk8t7xPZIwYa18nthLcr955SU
 i0enMctQ4wuO2OParBoEECjui2ZGD6WUnlLBJP5dR1ALgefl77d93H5wzxZsjJMX
 zrYsG5MLLz8SyZGgHL7H9e+ydLeLC9zwl2a6PiLMTg1m3E3/wlb+yzjOe/XFubxZ
 VCrRPvDXsTkCohwGA6rovcLZIxMiBDdjwpYzXMKqfwwePs2DrC9BzxX2n7P0hI/J
 QlroU/4mj4/xoc6Z/JMxBo0cK8PUhVfmlNt1Y77K40mbSGjwOUL9r905fPOcW1cL
 5QjWi7b4XVqp+tCcY7epckN4yivkurXPSFjqoG1DV2RAmY8CXH2uDYp7ZJyxn3BT
 7yMxdGfm4IUgvJbET38Bs7mM9EYn7oFBZMfNOJ4yeYYBZ5wCnx5V0bWmyP9SHoDn
 HUmOD8/NQ91Lafx+qDH86TC0Yi9LMRfyLg0jncVyrF4Mq6R7KPgNHFEjDDUw4OxE
 6mskECsORKnQZ7GNe+0/r9Ke8Qy1dmhtQ1mUaKn3GcRwTFveGB4cXJf9yvCFid5Y
 bOPKKoCFpy7W+ncZ4WDX
 =T3kf
 -----END PGP SIGNATURE-----

Merge tag 'gadget-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

usb: gadget: patches for v3.7 merge window

This pull request is large but the biggest part is the first part
of the cleanup on the gadget framework so we have a saner setup
to add configfs support for v3.8.

We have also some more conversions to the new udc_start/udc_stop
which makes us closer from dropping the old interfaces.

USB_GADGET_DUALSPEED and USB_GADGET_SUPERSPEED are finally gone,
thanks to Michal for his awesome work.

Other than that, we have the usual set of miscellaneous changes
and cleanups involving improvements to debug messages, removal
of duplicated includes, moving dereference after NULL test,
making renesas_hsbhs' irq handler Shared, unused code being dropped,
prevention of sleep-inside-spinlock bugs and a race condition fix
on udc-core.
2012-09-11 13:39:49 -07:00
Ajay Kumar Gupta d8c3ef256f usb: musb: dsps: remove explicit NOP device creation
As NOP device node is now added in am33xx tree so remove the call
which creates the NOP platform_device.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Santhapuri, Damodar <damodar.santhapuri@ti.com>
Signed-off-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-11 17:36:50 +03:00
Ajay Kumar Gupta 65145677a6 usb: musb: dsps: add dt support
Added device tree support for dsps musb glue driver and updated the
Documentation with device tree binding information.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Santhapuri, Damodar <damodar.santhapuri@ti.com>
Signed-off-by: Ravi Babu <ravibabu@ti.com>
[afzal@ti.com: use '-' instead of '_' for dt properties]
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-11 17:36:17 +03:00
B, Ravi db4a93202e usb: musb: am335x: add support for dual instance
AM335x and TI81xx platform has dual musb controller so updating the
musb_dspc.c to support the same.

Changes:
        - Moved otg_workaround timer to glue structure
        - Moved static local variable last_timer to glue structure
        - PHY on/off related cleanups

Signed-off-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Santhapuri, Damodar <damodar.santhapuri@ti.com>
[afzal@ti.com: remove control module related modifications]
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-11 17:35:44 +03:00
Ajay Kumar Gupta 8d2421e68c usb: musb: kill global and static for multi instance
Moved global variable "musb_debugfs_root" and static variable
"old_state" to 'struct musb' to help support multi instance of
musb controller as present on AM335x platform.

Also removed the global variable "orig_dma_mask" and filled the
dev->dma_mask with parent device's dma_mask.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Santhapuri, Damodar <damodar.santhapuri@ti.com>
Signed-off-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-11 17:34:45 +03:00
B, Ravi 65b3d52d02 usb: musb: add musb_ida for multi instance support
Added musb_ida in musb_core.c to manage the multi core ids.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Santhapuri, Damodar <damodar.santhapuri@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-11 17:34:41 +03:00
Kishon Vijay Abraham I 00a0b1d58a usb: musb: omap: Add device tree support for omap musb glue
Added device tree support for omap musb driver and updated the
Documentation with device tree binding information.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-11 12:13:23 +03:00
Kishon Vijay Abraham I 5ec4059076 usb: musb: omap: write directly to mailbox instead of using phy
The glue layer should directly write to mailbox register (present in
control module) instead of calling phy layer to write to mailbox
register. Writing to mailbox register notifies the core of events like
device connect/disconnect.

Currently writing to control module register is taken care in this
driver which will be removed once the control module driver is in place.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-11 12:13:22 +03:00
Sergei Shtylyov 7effdbd651 usb: musb: musbhsdma: fix IRQ check
dma_controller_create() in this MUSB DMA driver only regards 0 as a wrong IRQ
number, despite platform_get_irq_byname() that it calls returns -ENXIO in that
case. It leads to calling request_irq() with a negative IRQ number, and when it
naturally fails, the following is printed to the console:

request_irq -6 failed!

and the DMA controller is not created.

Fix this function to filter out the error values as well as 0.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06 19:52:28 +03:00
Sergei Shtylyov ff41aaa3b6 usb: musb: tusb6010: fix error path in tusb_probe()
On platform_device_add() failure, the TUSB6010 glue layer forgets to call
platform_device_put() -- probably due to a typo...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06 19:52:27 +03:00
yuzheng ma 3067779b15 usb: musb: host: fix for musb_start_urb Oops
when using musb_urb_enqueue to submit three urbs to the same endpoint, when
hep->hcpriv is NULL, qh will be allocated when the first urb is completed.

When the IRQ completes the next two urbs, qh->hep->hcpriv will be set to NULL.
Now the second urb get musb->lock and executes musb_schedule(), but
next_urb(qh) is NULL, so musb_start_urb will Oops.

[ balbi@ti.com : practically rewrote commit log so it makes sense ]

Signed-off-by: mayuzheng <myz147@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06 19:52:26 +03:00
Sergei Shtylyov 28dd924a7b usb: musb: core: fix kernel-doc of musb_init_controller()
Some parameter names in this function's kernel-doc don't match the real
parameters. While at it, give the 'nIrq' parameter slightly more verbose
description.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-31 12:55:52 +03:00
Michal Nazarewicz 85b8614d72 usb: gadget: get rid of USB_GADGET_{DUAL,SUPER}SPEED
This commit removes USB_GADGET_DUALSPEED and USB_GADGET_SUPERSPEED
Kconfig options.  Since now kernel allows many UDC drivers to be
compiled, those options may turn to no longer be valid.  For
instance, if someone decides to build UDC that supports super
speed and UDC that supports high speed only, the latter will be
"assumed" to support super speed since USB_GADGET_SUPERSPEED will
be selected by the former.

The test of whether CONFIG_USB_GADGET_*SPEED was defined was just
an optimisation which removed otherwise dead code (ie. if UDC is
not dual speed, there is no need to handle cases that can happen
if speed is high).  This commit removes those checks.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-31 12:49:40 +03:00
Peter Meerwald 57bfc0a7ae usb: musb: fix spelling of families in Kconfig
Trivial patch fixin spelling of families in Kconfig

[ balbi@ti.com : added the obvious commit log ]

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-20 11:53:46 +03:00
Matthias Brugger 10770c5aa0 usb: musb: omap2430.c delete unused variable.
Variable ret is always evaluated as true, so we don't need to check it.

Signed-off-by: Matthias Brugger <mbrugger@iseebcn.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-20 10:20:04 +03:00
NeilBrown 12a19b5f83 usb: musb: omap2430: don't loop indefinitely in interrupt.
When called during resume_irqs, omap2430_musb_set_vbus() is run with
interrupts disabled,  In that case 'jiffies' never changes so the loop
can loop forever.

So impose a maximum loop count and add an 'mdelay' to ensure we wait
a reasonable amount of time for bit to be cleared.

This fixes a hang on resume.

Signed-of-by: NeilBrown <neilb@suse.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-14 11:03:00 +03:00
Shubhrajyoti D 07a67bbb95 usb: musb: Make dma_controller_create __devinit
dma_controller_create is called only from musb_init_controller
which is __devint so annotate dma_controller_create also with
__devint.

fixes the warn

WARNING: vmlinux.o(.devinit.text+0x6fa8): Section mismatch in reference from the function musb_init_controller() to the function .init.text:dma_controller_create()
The function __devinit musb_init_controller() references
a function __init dma_controller_create().
If dma_controller_create is only used by musb_init_controller then
annotate dma_controller_create with a matching annotation.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-09 18:05:07 +03:00
Shubhrajyoti D f69dfa1f01 usb: musb: Prevent the masking of the return value
Currently the errors returned by fifo_setup get masked
by EINVAL, propagate the same to the caller.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-09 14:38:51 +03:00
Roger Quadros 660fa8863d usb: musb: Remove redundant if statement
Remove unnecessary if condition. No change in logic.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-09 12:34:47 +03:00
Felipe Balbi a04d46d02e usb: musb: drop is_host_capable() and is_peripheral_capable()
those two were defined to 1 anyway, quite useless.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-09 12:34:46 +03:00
Felipe Balbi 032ec49f53 usb: musb: drop useless board_mode usage
we are compiling the driver always with full OTG
capabilities, so that board_mode trick becomes
useless.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-09 12:34:46 +03:00
Roger Quadros 4f3e8d263d usb: musb: use DMA mode 1 whenever possible
Do not rely on any hints from gadget drivers and use DMA mode 1
whenever we expect data of at least the endpoint's packet size and
have not yet received a short packet.

The last packet if short is always transferred using DMA mode 0.

This patch fixes USB throughput issues in mass storage mode for
host to device transfers.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-07 16:16:34 +03:00
Virupax Sadashivpetimath 8e8a551654 usb: musb: host: Handle highmem in PIO mode
In case of USB bulk transfer, when himem page
is received, the usb_sg_init function sets the
urb transfer buffer to NULL. When such URB
transfer is handled, kernel crashes in PIO mode.
Handle this by mapping the highmem buffer in PIO mode.

Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Signed-off-by: Praveena NADAHALLY <praveen.nadahally@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-07 14:27:18 +03:00
Brian Downing decadacbd7 usb: musb: Fix bad call to kfree() in musb_free
Commit 622859634a (usb: musb: drop a
gigantic amount of ifdeferry) included this change:

    @@ -1901,11 +1844,7 @@ static void musb_free(struct musb *musb)
                    dma_controller_destroy(c);
            }

    -#ifdef CONFIG_USB_MUSB_HDRC_HCD
    -       usb_put_hcd(musb_to_hcd(musb));
    -#else
            kfree(musb);
    -#endif
     }

     /*

Since musb comes from struct usb_hcd's hcd_priv, which is allocated on
the end of that struct, kfree'ing it is not going to work.  Replace
kfree(musb) with usb_put_hcd(musb_to_hcd(musb)), which appears to be
the right thing to do here.

Signed-off-by: Brian Downing <bdowning@lavos.net>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-07 14:26:17 +03:00
Felipe Balbi a156544bc9 usb: musb: fix sparse warnings
The following warnings are fixed:

drivers/usb/musb/musb_core.c:357:6: warning: symbol 'musb_otg_timer_func' was not declared. Should it be static?
drivers/usb/musb/musb_core.c:1339:27: warning: incorrect type in initializer (different address spaces)
drivers/usb/musb/musb_core.c:1339:27:    expected void *mbase
drivers/usb/musb/musb_core.c:1339:27:    got void [noderef] <asn:2>*mregs
drivers/usb/musb/musb_core.c:1347:17: warning: incorrect type in argument 1 (different address spaces)
drivers/usb/musb/musb_core.c:1347:17:    expected void [noderef] <asn:2>*addr
drivers/usb/musb/musb_core.c:1347:17:    got void *mbase
drivers/usb/musb/musb_core.h:487:27: warning: incorrect type in initializer (different address spaces)
drivers/usb/musb/musb_core.h:487:27:    expected void *mbase
drivers/usb/musb/musb_core.h:487:27:    got void [noderef] <asn:2>*mregs
drivers/usb/musb/musb_core.h:491:26: warning: incorrect type in argument 1 (different address spaces)
drivers/usb/musb/musb_core.h:491:26:    expected void const [noderef] <asn:2>*addr
drivers/usb/musb/musb_core.h:491:26:    got void *mbase
drivers/usb/musb/tusb6010.c:270:48: warning: incorrect type in argument 2 (different address spaces)
drivers/usb/musb/tusb6010.c:270:48:    expected void [noderef] <asn:2>*buf
drivers/usb/musb/tusb6010.c:270:48:    got unsigned char [usertype] *[assigned] buf
drivers/usb/musb/tusb6010.c:164:32: warning: incorrect type in argument 1 (different address spaces)
drivers/usb/musb/tusb6010.c:164:32:    expected void *to
drivers/usb/musb/tusb6010.c:164:32:    got void [noderef] <asn:2>*buf
drivers/usb/musb/tusb6010.c:172:24: warning: incorrect type in argument 1 (different address spaces)
drivers/usb/musb/tusb6010.c:172:24:    expected void *to
drivers/usb/musb/tusb6010.c:172:24:    got void [noderef] <asn:2>*[assigned] buf

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-07 14:00:50 +03:00
Kishon Vijay Abraham I f039df580a usb: musb: cleanup while removing musb omap glue driver
No functional change. Just replaced the call to platform_device_del and
platform_device_put with platform_device_unregister.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-03 11:37:40 +03:00
Felipe Balbi 78c289f876 usb: xceiv: create nop-usb-xceiv.h and avoid pollution on otg.h
nop-usb-xceiv was polluting otg.h with its own
function prototypes. Move those prototypes to
a nop-usb-xceiv.h header.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-03 09:36:18 +03:00
Ajay Kumar Gupta f283862f3b usb: musb: NAK timeout scheme on bulk TX endpoint
Fixes endpoint starvation issue when more than one bulk QH is
multiplexed on the reserved bulk TX endpoint.

This patch sets the NAK timeout interval for such QHs, and when
a timeout triggers the next QH will be scheduled.

This scheme doesn't work for devices which are connected to a
high to full speed tree (transaction translator) as there is
no NAK timeout interrupt from the musb controller from such
devices.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-03 09:34:42 +03:00
Ajay Kumar Gupta 603fe2b21d usb: musb: check for zero byte in musb_read/write_fifo
Added a check in musb_{read | write}_fifo for zero byte length.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-03 09:34:41 +03:00
Ajay Kumar Gupta d17d535fec usb: musb: gadget: don't program dma for zero byte tx
This is to reduce the overhead of dma programming for zero byte
transmit as same can be done using pio mode.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-03 09:34:40 +03:00
Ajay Kumar Gupta 3132122c66 usb: musb: host: don't program dma for zero byte tx
This is to reduce the overhead of dma programming for zero byte
transmit as same can be done using pio mode.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-03 09:34:39 +03:00
Sergei Shtylyov f0443afd1d usb: musb: gadget: use variables according to their names in rxstate()
In rxstate(), improper types are given to 'fifo_count' and 'len' variables, and
these variables are not used in accordance to their names (up to the certain
point), i.e. 'len' to hold the size of a packet in the RX FIFO, and 'fifo_count'
to hold a difference between 'request->length' and 'request->actual'...
Interchange the variables up to the point where their use starts to make sense
again.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-03 09:34:38 +03:00
Ajay Kumar Gupta 0e38c4ed83 usb: musb: reorder runtime pm call
The clock need to be enabled before the musb_core platform device is
created and registered.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-03 09:30:44 +03:00
Ajay Kumar Gupta 3bb5534853 usb: musb: am335x: fix pdev resource bug
We are overwriting the resource->name to "mc" so that musb_core.c
can understand it but this is also changing the platform device's
resource->name as the "name" address remains same.

Fixing the same by changing the resource->name field of local
structure only.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-03 09:30:43 +03:00
Ajay Kumar Gupta 1f3f7eceff usb: musb: Fix wrong config for am33xx and ti81xx
Commit "bb6abcf: ARM: OMAP2+: Kconfig: convert SOC_OMAPAM33XX to
SOC_AM33XX" and "3395955: ARM: OMAP2+: Kconfig: convert
SOC_OMAPTI81XX to SOC_TI81XX" has changed the SOC config for AM33XX
and TI81XX as shown below

CONFIG_SOC_OMAPAM33XX --> CONFIG_SOC_AM33XX
CONFIG_SOC_OMAPTI81XX --> CONFIG_SOC_TI81XX

So updating the same at musb driver for AM33XX and TI81XX platforms.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-03 09:30:42 +03:00
Viresh Kumar 08aff53582 usb/musb: remove conditional compilation of clk code
With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in
clk.h, there is no need to have clk code enclosed in #ifdef
CONFIG_HAVE_CLK, #endif macros.

musb also has these dummy macros defined locally.  Remove them as they
aren't required anymore.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: viresh kumar <viresh.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30 17:25:12 -07:00