Commit Graph

38 Commits

Author SHA1 Message Date
Richard Alpe bfb3e5dd8d tipc: move and rename the legacy nl api to "nl compat"
The new netlink API is no longer "v2" but rather the standard API and
the legacy API is now "nl compat". We split them into separate
start/stop and put them in different files in order to further
distinguish them.

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-09 13:20:47 -08:00
Ying Xue d49e204161 tipc: make netlink support net namespace
Currently tipc module only allows users sitting on "init_net" namespace
to configure it through netlink interface. But now almost each tipc
component is able to be aware of net namespace, so it's time to open
the permission for users residing in other namespaces, allowing them
to configure their own tipc stack instance through netlink interface.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Tested-by: Tero Aho <Tero.Aho@coriant.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12 16:24:34 -05:00
Ying Xue c93d3baa24 tipc: involve namespace infrastructure
Involve namespace infrastructure, make the "tipc_net_id" global
variable aware of per namespace, and rename it to "net_id". In
order that the conversion can be successfully done, an instance
of networking namespace must be passed to relevant functions,
allowing them to access the "net_id" variable of per namespace.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Tested-by: Tero Aho <Tero.Aho@coriant.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12 16:24:32 -05:00
Richard Alpe 1593123a6a tipc: add name table dump to new netlink api
Add TIPC_NL_NAME_TABLE_GET command to the new tipc netlink API.

This command supports dumping the name table of all nodes.

Netlink logical layout of name table response message:
-> name table
    -> publication
        -> type
        -> lower
        -> upper
        -> scope
        -> node
        -> ref
        -> key

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21 15:01:32 -05:00
Richard Alpe 27c2141672 tipc: add net set to new netlink api
Add TIPC_NL_NET_SET command to the new tipc netlink API.

This command can set the network id and network (tipc) address.

Netlink logical layout of network set message:
-> net
     [ -> id ]
     [ -> address ]

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21 15:01:31 -05:00
Richard Alpe fd3cf2ad51 tipc: add net dump to new netlink api
Add TIPC_NL_NET_GET command to the new tipc netlink API.

This command dumps the network id of the node.

Netlink logical layout of returned network data:
-> net
    -> id

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21 15:01:31 -05:00
Richard Alpe 3e4b6ab58d tipc: add node get/dump to new netlink api
Add TIPC_NL_NODE_GET to the new tipc netlink API.

This command can dump the address and node status of all nodes in the
tipc cluster.

Netlink logical layout of returned node/address data:
-> node
    -> address
    -> up flag

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21 15:01:31 -05:00
Richard Alpe 1e55417d8f tipc: add media set to new netlink api
Add TIPC_NL_MEDIA_SET command to the new tipc netlink API.

This command can set one or more link properties for a particular
media.

Netlink logical layout of bearer set message:
-> media
    -> name
    -> link properties
        [ -> tolerance ]
        [ -> priority ]
        [ -> window ]

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21 15:01:31 -05:00
Richard Alpe 46f15c6794 tipc: add media get/dump to new netlink api
Add TIPC_NL_MEDIA_GET command to the new tipc netlink API.

This command supports dumping all information about all defined
media as well as getting all information about a specific media.

The information about a media includes name and link properties.

Netlink logical layout of media get response message:
-> media
    -> name
    -> link properties
        -> tolerance
        -> priority
        -> window

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21 15:01:31 -05:00
Richard Alpe ae36342b50 tipc: add link stat reset to new netlink api
Add TIPC_NL_LINK_RESET_STATS command to the new netlink API.

This command resets the link statistics for a particular link.

Netlink logical layout of link reset message:
-> link
    -> name

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21 15:01:31 -05:00
Richard Alpe f96ce7a20d tipc: add link set to new netlink api
Add TIPC_NL_LINK_SET to the new tipc netlink API.

This command can set one or more link properties for a particular
link.

Netlink logical layout of link set message:
-> link
    -> name
    -> properties
        [ -> tolerance ]
        [ -> priority ]
        [ -> window ]

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21 15:01:30 -05:00
Richard Alpe 7be57fc691 tipc: add link get/dump to new netlink api
Add TIPC_NL_LINK_GET command to the new tipc netlink API.

This command supports dumping all information about all links
(including the broadcast link) or getting all information about a
specific link (not the broadcast link).

The information about a link includes name, transmission info,
properties and link statistics.

As the tipc broadcast link is special we unfortunately have to treat
it specially. It is a deliberate decision not to abstract the
broadcast link on this (API) level.

Netlink logical layout of link response message:
    -> port
        -> name
        -> MTU
        -> RX
        -> TX
        -> up flag
        -> active flag
        -> properties
           -> priority
           -> tolerance
           -> window
        -> statistics
            -> rx_info
            -> rx_fragments
            -> rx_fragmented
            -> rx_bundles
            -> rx_bundled
            -> tx_info
            -> tx_fragments
            -> tx_fragmented
            -> tx_bundles
            -> tx_bundled
            -> msg_prof_tot
            -> msg_len_cnt
            -> msg_len_tot
            -> msg_len_p0
            -> msg_len_p1
            -> msg_len_p2
            -> msg_len_p3
            -> msg_len_p4
            -> msg_len_p5
            -> msg_len_p6
            -> rx_states
            -> rx_probes
            -> rx_nacks
            -> rx_deferred
            -> tx_states
            -> tx_probes
            -> tx_nacks
            -> tx_acks
            -> retransmitted
            -> duplicates
            -> link_congs
            -> max_queue
            -> avg_queue

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21 15:01:30 -05:00
Richard Alpe 1a1a143daf tipc: add publication dump to new netlink api
Add TIPC_NL_PUBL_GET command to the new tipc netlink API.

This command supports dumping of all publications for a specific
socket.

Netlink logical layout of request message:
    -> socket
        -> reference

Netlink logical layout of response message:
    -> publication
        -> type
        -> lower
        -> upper

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21 15:01:30 -05:00
Richard Alpe 34b78a127c tipc: add sock dump to new netlink api
Add TIPC_NL_SOCK_GET command to the new tipc netlink API.

This command supports dumping of all available sockets with their
associated connection or publication(s). It could be extended to reply
with a single socket if the NLM_F_DUMP isn't set.

The information about a socket includes reference, address, connection
information / publication information.

Netlink logical layout of response message:
-> socket
    -> reference
    -> address
    [
    -> connection
        -> node
        -> socket
        [
        -> connected flag
        -> type
        -> instance
        ]
    ]
    [
    -> publication flag
    ]

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21 15:01:30 -05:00
Richard Alpe 315c00bc9f tipc: add bearer set to new netlink api
Add TIPC_NL_BEARER_SET command to the new tipc netlink API.

This command can set one or more link properties for a particular
bearer.

Netlink logical layout of bearer set message:
-> bearer
    -> name
    -> link properties
        [ -> tolerance ]
        [ -> priority ]
        [ -> window ]

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21 15:01:30 -05:00
Richard Alpe 35b9dd7607 tipc: add bearer get/dump to new netlink api
Add TIPC_NL_BEARER_GET command to the new tipc netlink API.

This command supports dumping all data about all bearers or getting
all information about a specific bearer.

The information about a bearer includes name, link priorities and
domain.

Netlink logical layout of bearer get message:
-> bearer
    -> name

Netlink logical layout of returned bearer information:
-> bearer
    -> name
    -> link properties
        -> priority
        -> tolerance
        -> window
    -> domain

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21 15:01:29 -05:00
Richard Alpe 0655f6a863 tipc: add bearer disable/enable to new netlink api
A new netlink API for tipc that can disable or enable a tipc bearer.

The new API is separated from the old API because of a bug in the
user space client (tipc-config). The problem is that older versions
of tipc-config has a very low receive limit and adding commands to
the legacy genl_opts struct causes the ctrl_getfamily() response
message to grow, subsequently breaking the tool.

The new API utilizes netlink policies for input validation. Where the
top-level netlink attributes are tipc-logical entities, like bearer.
The top level entities then contain nested attributes. In this case
a name, nested link properties and a domain.

Netlink commands implemented in this patch:
TIPC_NL_BEARER_ENABLE
TIPC_NL_BEARER_DISABLE

Netlink logical layout of bearer enable message:
-> bearer
    -> name
    [ -> domain ]
    [
    -> properties
        -> priority
    ]

Netlink logical layout of bearer disable message:
-> bearer
    -> name

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21 15:01:29 -05:00
Eric W. Biederman 90f62cf30a net: Use netlink_ns_capable to verify the permisions of netlink messages
It is possible by passing a netlink socket to a more privileged
executable and then to fool that executable into writing to the socket
data that happens to be valid netlink message to do something that
privileged executable did not intend to do.

To keep this from happening replace bare capable and ns_capable calls
with netlink_capable, netlink_net_calls and netlink_ns_capable calls.
Which act the same as the previous calls except they verify that the
opener of the socket had the desired permissions as well.

Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24 13:44:54 -04:00
Ying Xue 9fe7ed4749 tipc: remove all enabled flags from all tipc components
When tipc module is inserted, many tipc components are initialized
one by one. During the initialization period, if one of them is
failed, tipc_core_stop() will be called to stop all components
whatever corresponding components are created or not. To avoid to
release uncreated ones, relevant components have to add necessary
enabled flags indicating whether they are created or not.

But in the initialization stage, if one component is unsuccessfully
created, we will just destroy successfully created components before
the failed component instead of all components. All enabled flags
defined in components, in turn, become redundant. Additionally it's
also unnecessary to identify whether table.types is NULL in
tipc_nametbl_stop() because name stable has been definitely created
successfully when tipc_nametbl_stop() is called.

Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-22 00:00:15 -05:00
Johannes Berg c53ed74236 genetlink: only pass array to genl_register_family_with_ops()
As suggested by David Miller, make genl_register_family_with_ops()
a macro and pass only the array, evaluating ARRAY_SIZE() in the
macro, this is a little safer.

The openvswitch has some indirection, assing ops/n_ops directly in
that code. This might ultimately just assign the pointers in the
family initializations, saving the struct genl_family_and_ops and
code (once mcast groups are handled differently.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19 16:39:05 -05:00
Hong zhi guo 573ce260b3 net-next: replace obsolete NLMSG_* with type safe nlmsg_*
Signed-off-by: Hong Zhiguo <honkiko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-28 14:25:25 -04:00
Eric W. Biederman 15e473046c netlink: Rename pid to portid to avoid confusion
It is a frequent mistake to confuse the netlink port identifier with a
process identifier.  Try to reduce this confusion by renaming fields
that hold port identifiers portid instead of pid.

I have carefully avoided changing the structures exported to
userspace to avoid changing the userspace API.

I have successfully built an allyesconfig kernel with this change.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-10 15:30:41 -04:00
Erik Hugne 2cf8aa19fe tipc: use standard printk shortcut macros (pr_err etc.)
All messages should go directly to the kernel log.  The TIPC
specific error, warning, info and debug trace macro's are
removed and all references replaced with pr_err, pr_warn,
pr_info and pr_debug.

Commonly used sub-strings are explicitly declared as a const
char to reduce .text size.

Note that this means the debug messages (changed to pr_debug),
are now enabled through dynamic debugging, instead of a TIPC
specific Kconfig option (TIPC_DEBUG).  The latter will be
phased out completely

Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
[PG: use pr_fmt as suggested by Joe Perches <joe@perches.com>]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-07-13 19:24:44 -04:00
Johannes Berg 134e63756d genetlink: make netns aware
This makes generic netlink network namespace aware. No
generic netlink families except for the controller family
are made namespace aware, they need to be checked one by
one and then set the family->netnsok member to true.

A new function genlmsg_multicast_netns() is introduced to
allow sending a multicast message in a given namespace,
for example when it applies to an object that lives in
that namespace, a new function genlmsg_multicast_allns()
to send a message to all network namespaces (for objects
that do not have an associated netns).

The function genlmsg_multicast() is changed to multicast
the message in just init_net, which is currently correct
for all generic netlink families since they only work in
init_net right now. Some will later want to work in all
net namespaces because they do not care about the netns
at all -- those will have to be converted to use one of
the new functions genlmsg_multicast_allns() or
genlmsg_multicast_netns() whenever they are made netns
aware in some way.

After this patch families can easily decide whether or
not they should be available in all net namespaces. Many
genl families us it for objects not related to networking
and should therefore be available in all namespaces, but
that will have to be done on a per family basis.

Note that this doesn't touch on the checkpoint/restart
problem where network namespaces could be used, genl
families and multicast groups are numbered globally and
I see no easy way of changing that, especially since it
must be possible to multicast to all network namespaces
for those families that do not care about netns.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-12 14:03:27 -07:00
Michał Mirosław acb0a200ae tipc: Use genl_register_family_with_ops()
Use genl_register_family_with_ops() instead of a copy. This also changes
netlink related variable names to be kernel-wide unique for consistency
with other users.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-21 16:50:23 -07:00
Allan Stephens 59f0c4523f tipc: Fix skb_under_panic when configuring TIPC without privileges
This patch prevents a TIPC configuration command requiring network
administrator privileges from triggering an skbuff underrun if it
is issued by a process lacking those privileges.  The revised error
handling code avoids the use of a potentially uninitialized global
variable by transforming the unauthorized command into a new command,
then following the standard command processing path to generate the
required error message.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-21 14:52:30 -07:00
Florian Westphal 64beb8f3eb [TIPC]: Fix infinite loop in netlink handler
The tipc netlink config handler uses the nlmsg_pid from the
request header as destination for its reply. If the application
initialized nlmsg_pid to 0, the reply is looped back to the kernel,
causing hangup. Fix: use nlmsg_pid of the skb that triggered the
request.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-23 22:59:40 -07:00
Arnaldo Carvalho de Melo b529ccf279 [NETLINK]: Introduce nlmsg_hdr() helper
For the common "(struct nlmsghdr *)skb->data" sequence, so that we reduce the
number of direct accesses to skb->data and for consistency with all the other
cast skb member helpers.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:26:34 -07:00
YOSHIFUJI Hideaki c430728526 [NET] TIPC: Fix whitespace errors.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:20:15 -08:00
Per Liden 4323add677 [TIPC] Avoid polluting the global namespace
This patch adds a tipc_ prefix to all externally visible symbols.

Signed-off-by: Per Liden <per.liden@ericsson.com>
2006-01-18 00:45:16 +01:00
Per Liden 23b0ca5bf5 [PATCH] genetlink: don't touch module ref count
Increasing the module ref count at registration will block the module from
ever being unloaded. In fact, genetlink should not care about the owner at
all. This patch removes the owner field from the struct registered with
genetlink.

Signed-off-by: Per Liden <per.liden@ericsson.com>
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 13:06:40 -08:00
Per Liden 593a5f22d8 [TIPC] More updates of file headers
Updated copyright notice to include the year the file was
actually created. Information about file creation dates
was extracted from the files in the old CVS repository
at tipc.sourceforge.net.

Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-12 14:06:39 -08:00
Per Liden 9da1c8b694 [TIPC] Update of file headers
The copyright statements from different parts of Ericsson
have been merged into one.

Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-12 14:06:38 -08:00
Per Liden d0a14a9dbd [TIPC] Cleaned up info/warn/err macros
Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-12 14:06:37 -08:00
Per Liden 9ea1fd3c1a [TIPC] License header update
The license header in each file now more clearly state that this
code is licensed under a dual BSD/GPL. Before this was only
evident if you looked at the MODULE_LICENSE line in core.c.

Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-12 14:06:36 -08:00
Jon Maloy b70e4f45a8 [TIPC} Fixed bug in disc_timeout()
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
2006-01-12 14:06:33 -08:00
Per Liden 1dba974333 [TIPC] Use dynamically allocated family id with NETLINK_GENERIC
Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-12 14:06:32 -08:00
Per Liden b97bf3fd8f [TIPC] Initial merge
TIPC (Transparent Inter Process Communication) is a protocol designed for
intra cluster communication. For more information see
http://tipc.sourceforge.net

Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-12 14:06:31 -08:00