Commit Graph

170 Commits

Author SHA1 Message Date
David S. Miller f6d3125fa3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	net/dsa/slave.c

net/dsa/slave.c simply had overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-02 07:21:25 -07:00
Petr Mladek 54aea45429 kprobes: use _do_fork() in samples to make them work again
Commit 3033f14ab7 ("clone: support passing tls argument via C rather
than pt_regs magic") introduced _do_fork() that allowed to pass @tls
parameter.

The old do_fork() is defined only for architectures that are not ready
to use this way and do not define HAVE_COPY_THREAD_TLS.

Let's use _do_fork() in the kprobe examples to make them work again on
all architectures.

Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thiago Macieira <thiago.macieira@intel.com>
Cc: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-01 21:42:35 -04:00
Alexei Starovoitov 27b29f6305 bpf: add bpf_redirect() helper
Existing bpf_clone_redirect() helper clones skb before redirecting
it to RX or TX of destination netdev.
Introduce bpf_redirect() helper that does that without cloning.

Benchmarked with two hosts using 10G ixgbe NICs.
One host is doing line rate pktgen.
Another host is configured as:
$ tc qdisc add dev $dev ingress
$ tc filter add dev $dev root pref 10 u32 match u32 0 0 flowid 1:2 \
   action bpf run object-file tcbpf1_kern.o section clone_redirect_xmit drop
so it receives the packet on $dev and immediately xmits it on $dev + 1
The section 'clone_redirect_xmit' in tcbpf1_kern.o file has the program
that does bpf_clone_redirect() and performance is 2.0 Mpps

$ tc filter add dev $dev root pref 10 u32 match u32 0 0 flowid 1:2 \
   action bpf run object-file tcbpf1_kern.o section redirect_xmit drop
which is using bpf_redirect() - 2.4 Mpps

and using cls_bpf with integrated actions as:
$ tc filter add dev $dev root pref 10 \
  bpf run object-file tcbpf1_kern.o section redirect_xmit integ_act classid 1
performance is 2.5 Mpps

To summarize:
u32+act_bpf using clone_redirect - 2.0 Mpps
u32+act_bpf using redirect - 2.4 Mpps
cls_bpf using redirect - 2.5 Mpps

For comparison linux bridge in this setup is doing 2.1 Mpps
and ixgbe rx + drop in ip_rcv - 7.8 Mpps

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-17 21:09:07 -07:00
Kaixu Xia 5ed3ccbd5a bpf: fix build warnings and add function read_trace_pipe()
There are two improvements in this patch:
 1. Fix the build warnings;
 2. Add function read_trace_pipe() to print the result on
    the screen;

Before this patch, we can get the result through /sys/kernel/de
bug/tracing/trace_pipe and get nothing on the screen.
By applying this patch, the result can be printed on the screen.
  $ ./tracex6
	...
         tracex6-705   [003] d..1   131.428593: : CPU-3   19981414
            sshd-683   [000] d..1   131.428727: : CPU-0   221682321
            sshd-683   [000] d..1   131.428821: : CPU-0   221808766
            sshd-683   [000] d..1   131.428950: : CPU-0   221982984
            sshd-683   [000] d..1   131.429045: : CPU-0   222111851
         tracex6-705   [003] d..1   131.429168: : CPU-3   20757551
            sshd-683   [000] d..1   131.429170: : CPU-0   222281240
            sshd-683   [000] d..1   131.429261: : CPU-0   222403340
            sshd-683   [000] d..1   131.429378: : CPU-0   222561024
	...

Signed-off-by: Kaixu Xia <xiakaixu@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12 16:39:12 -07:00
Kaixu Xia 47efb30274 samples/bpf: example of get selected PMU counter value
This is a simple example and shows how to use the new ability
to get the selected Hardware PMU counter value.

Signed-off-by: Kaixu Xia <xiakaixu@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-09 22:50:06 -07:00
Alex Gartrell 24b4d2abd0 ebpf: Allow dereferences of PTR_TO_STACK registers
mov %rsp, %r1           ; r1 = rsp
        add $-8, %r1            ; r1 = rsp - 8
        store_q $123, -8(%rsp)  ; *(u64*)r1 = 123  <- valid
        store_q $123, (%r1)     ; *(u64*)r1 = 123  <- previously invalid
        mov $0, %r0
        exit                    ; Always need to exit

And we'd get the following error:

	0: (bf) r1 = r10
	1: (07) r1 += -8
	2: (7a) *(u64 *)(r10 -8) = 999
	3: (7a) *(u64 *)(r1 +0) = 999
	R1 invalid mem access 'fp'

	Unable to load program

We already know that a register is a stack address and the appropriate
offset, so we should be able to validate those references as well.

Signed-off-by: Alex Gartrell <agartrell@fb.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27 00:54:10 -07:00
David S. Miller c5e40ee287 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	net/bridge/br_mdb.c

br_mdb.c conflict was a function call being removed to fix a bug in
'net' but whose signature was changed in 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-23 00:41:16 -07:00
Steven Rostedt (Red Hat) d6726c8145 tracing: Fix sample output of dynamic arrays
He Kuang noticed that the trace event samples for arrays was broken:

"The output result of trace_foo_bar event in traceevent samples is
 wrong. This problem can be reproduced as following:

  (Build kernel with SAMPLE_TRACE_EVENTS=m)

  $ insmod trace-events-sample.ko

  $ echo 1 > /sys/kernel/debug/tracing/events/sample-trace/foo_bar/enable

  $ cat /sys/kernel/debug/tracing/trace

  event-sample-980 [000] ....  43.649559: foo_bar: foo hello 21 0x15
  BIT1|BIT3|0x10 {0x1,0x6f6f6e53,0xff007970,0xffffffff} Snoopy
                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                 The array length is not right, should be {0x1}.
  (ffffffff,ffffffff)

  event-sample-980 [000] ....  44.653827: foo_bar: foo hello 22 0x16
  BIT2|BIT3|0x10
  {0x1,0x2,0x646e6147,0x666c61,0xffffffff,0xffffffff,0x750aeffe,0x7}
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                 The array length is not right, should be {0x1,0x2}.
  Gandalf (ffffffff,ffffffff)"

This was caused by an update to have __print_array()'s second parameter
be the count of items in the array and not the size of the array.

As there is already users of __print_array(), it can not change. But
the sample code can and we can also improve on the documentation about
__print_array() and __get_dynamic_array_len().

Link: http://lkml.kernel.org/r/1436839171-31527-2-git-send-email-hekuang@huawei.com

Fixes: ac01ce1410 ("tracing: Make ftrace_print_array_seq compute buf_len")
Reported-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-07-17 14:15:13 -04:00
Michael Holzheu d912557b34 samples: bpf: enable trace samples for s390x
The trace bpf samples do not compile on s390x because they use x86
specific fields from the "pt_regs" structure.

Fix this and access the fields via new PT_REGS macros.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08 15:17:45 -07:00
Daniel Wagner 0fb1170ee6 bpf: BPF based latency tracing
BPF offers another way to generate latency histograms. We attach
kprobes at trace_preempt_off and trace_preempt_on and calculate the
time it takes to from seeing the off/on transition.

The first array is used to store the start time stamp. The key is the
CPU id. The second array stores the log2(time diff). We need to use
static allocation here (array and not hash tables). The kprobes
hooking into trace_preempt_on|off should not calling any dynamic
memory allocation or free path. We need to avoid recursivly
getting called. Besides that, it reduces jitter in the measurement.

CPU 0
      latency        : count     distribution
       1 -> 1        : 0        |                                        |
       2 -> 3        : 0        |                                        |
       4 -> 7        : 0        |                                        |
       8 -> 15       : 0        |                                        |
      16 -> 31       : 0        |                                        |
      32 -> 63       : 0        |                                        |
      64 -> 127      : 0        |                                        |
     128 -> 255      : 0        |                                        |
     256 -> 511      : 0        |                                        |
     512 -> 1023     : 0        |                                        |
    1024 -> 2047     : 0        |                                        |
    2048 -> 4095     : 166723   |*************************************** |
    4096 -> 8191     : 19870    |***                                     |
    8192 -> 16383    : 6324     |                                        |
   16384 -> 32767    : 1098     |                                        |
   32768 -> 65535    : 190      |                                        |
   65536 -> 131071   : 179      |                                        |
  131072 -> 262143   : 18       |                                        |
  262144 -> 524287   : 4        |                                        |
  524288 -> 1048575  : 1363     |                                        |
CPU 1
      latency        : count     distribution
       1 -> 1        : 0        |                                        |
       2 -> 3        : 0        |                                        |
       4 -> 7        : 0        |                                        |
       8 -> 15       : 0        |                                        |
      16 -> 31       : 0        |                                        |
      32 -> 63       : 0        |                                        |
      64 -> 127      : 0        |                                        |
     128 -> 255      : 0        |                                        |
     256 -> 511      : 0        |                                        |
     512 -> 1023     : 0        |                                        |
    1024 -> 2047     : 0        |                                        |
    2048 -> 4095     : 114042   |*************************************** |
    4096 -> 8191     : 9587     |**                                      |
    8192 -> 16383    : 4140     |                                        |
   16384 -> 32767    : 673      |                                        |
   32768 -> 65535    : 179      |                                        |
   65536 -> 131071   : 29       |                                        |
  131072 -> 262143   : 4        |                                        |
  262144 -> 524287   : 1        |                                        |
  524288 -> 1048575  : 364      |                                        |
CPU 2
      latency        : count     distribution
       1 -> 1        : 0        |                                        |
       2 -> 3        : 0        |                                        |
       4 -> 7        : 0        |                                        |
       8 -> 15       : 0        |                                        |
      16 -> 31       : 0        |                                        |
      32 -> 63       : 0        |                                        |
      64 -> 127      : 0        |                                        |
     128 -> 255      : 0        |                                        |
     256 -> 511      : 0        |                                        |
     512 -> 1023     : 0        |                                        |
    1024 -> 2047     : 0        |                                        |
    2048 -> 4095     : 40147    |*************************************** |
    4096 -> 8191     : 2300     |*                                       |
    8192 -> 16383    : 828      |                                        |
   16384 -> 32767    : 178      |                                        |
   32768 -> 65535    : 59       |                                        |
   65536 -> 131071   : 2        |                                        |
  131072 -> 262143   : 0        |                                        |
  262144 -> 524287   : 1        |                                        |
  524288 -> 1048575  : 174      |                                        |
CPU 3
      latency        : count     distribution
       1 -> 1        : 0        |                                        |
       2 -> 3        : 0        |                                        |
       4 -> 7        : 0        |                                        |
       8 -> 15       : 0        |                                        |
      16 -> 31       : 0        |                                        |
      32 -> 63       : 0        |                                        |
      64 -> 127      : 0        |                                        |
     128 -> 255      : 0        |                                        |
     256 -> 511      : 0        |                                        |
     512 -> 1023     : 0        |                                        |
    1024 -> 2047     : 0        |                                        |
    2048 -> 4095     : 29626    |*************************************** |
    4096 -> 8191     : 2704     |**                                      |
    8192 -> 16383    : 1090     |                                        |
   16384 -> 32767    : 160      |                                        |
   32768 -> 65535    : 72       |                                        |
   65536 -> 131071   : 32       |                                        |
  131072 -> 262143   : 26       |                                        |
  262144 -> 524287   : 12       |                                        |
  524288 -> 1048575  : 298      |                                        |

All this is based on the trace3 examples written by
Alexei Starovoitov <ast@plumgrid.com>.

Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23 06:09:58 -07:00
Alexei Starovoitov ffeedafbf0 bpf: introduce current->pid, tgid, uid, gid, comm accessors
eBPF programs attached to kprobes need to filter based on
current->pid, uid and other fields, so introduce helper functions:

u64 bpf_get_current_pid_tgid(void)
Return: current->tgid << 32 | current->pid

u64 bpf_get_current_uid_gid(void)
Return: current_gid << 32 | current_uid

bpf_get_current_comm(char *buf, int size_of_buf)
stores current->comm into buf

They can be used from the programs attached to TC as well to classify packets
based on current task fields.

Update tracex2 example to print histogram of write syscalls for each process
instead of aggregated for all.

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-15 15:53:50 -07:00
Alexei Starovoitov d691f9e8d4 bpf: allow programs to write to certain skb fields
allow programs read/write skb->mark, tc_index fields and
((struct qdisc_skb_cb *)cb)->data.

mark and tc_index are generically useful in TC.
cb[0]-cb[4] are primarily used to pass arguments from one
program to another called via bpf_tail_call() which can
be seen in sockex3_kern.c example.

All fields of 'struct __sk_buff' are readable to socket and tc_cls_act progs.
mark, tc_index are writeable from tc_cls_act only.
cb[0]-cb[4] are writeable by both sockets and tc_cls_act.

Add verifier tests and improve sample code.

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-07 02:01:33 -07:00
Alexei Starovoitov 3431205e03 bpf: make programs see skb->data == L2 for ingress and egress
eBPF programs attached to ingress and egress qdiscs see inconsistent skb->data.
For ingress L2 header is already pulled, whereas for egress it's present.
This is known to program writers which are currently forced to use
BPF_LL_OFF workaround.
Since programs don't change skb internal pointers it is safe to do
pull/push right around invocation of the program and earlier taps and
later pt->func() will not be affected.
Multiple taps via packet_rcv(), tpacket_rcv() are doing the same trick
around run_filter/BPF_PROG_RUN even if skb_shared.

This fix finally allows programs to use optimized LD_ABS/IND instructions
without BPF_LL_OFF for higher performance.
tc ingress + cls_bpf + samples/bpf/tcbpf1_kern.o
       w/o JIT   w/JIT
before  20.5     23.6 Mpps
after   21.8     26.6 Mpps

Old programs with BPF_LL_OFF will still work as-is.

We can now undo most of the earlier workaround commit:
a166151cbe ("bpf: fix bpf helpers to use skb->mac_header relative offsets")

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-07 02:01:33 -07:00
Jesper Dangaard Brouer 05a14d5e17 pktgen: add benchmark script pktgen_bench_xmit_mode_netif_receive.sh
This script pktgen_bench_xmit_mode_netif_receive.sh is a benchmark
script, which can be used for benchmarking part of the network stack.
This can be used for performance improving or catching regression in
that area.

The script is developed for benchmarking ingress qdisc path, original
idea by Alexei Starovoitov.  This script don't really need any
hardware.  This is achieved via the recently introduced stack inject
feature "xmit_mode netif_receive". See commit 62f64aed62 ("pktgen:
introduce xmit_mode '<start_xmit|netif_receive>'").

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-22 23:59:17 -04:00
Jesper Dangaard Brouer 1d73ba16ad pktgen: add sample script pktgen_sample03_burst_single_flow.sh
Add the pktgen samples script pktgen_sample03_burst_single_flow.sh
that demonstrates how to acheive maximum performance.

If correctly tuned[1] single CPU 10Gbit/s wirespeed small pkts is
possible[2] which is 14.88Mpps.  The trick is to take advantage of the
"burst" feature introduced in commit 38b2cf2982 ("net: pktgen:
packet bursting via skb->xmit_more").

[1] http://netoptimizer.blogspot.dk/2014/06/pktgen-for-network-overload-testing.html
[2] http://netoptimizer.blogspot.dk/2014/10/unlocked-10gbps-tx-wirespeed-smallest.html

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-22 23:59:17 -04:00
Jesper Dangaard Brouer 282fb58947 pktgen: add sample script pktgen_sample02_multiqueue.sh
Add the pktgen samples script pktgen_sample02_multiqueue.sh that
demonstrates generating packets on multiqueue NICs.

Specifically notice the options "-t" that specifies how many
kernel threads to activate.  Also notice the flag QUEUE_MAP_CPU,
which cause the SKB TX queue to be mapped to the CPU running the
kernel thread.  For best scalability people are also encourage to
map NIC IRQ /proc/irq/*/smp_affinity to CPU number.

Usage example with "-t" 4 threads and help:
 ./pktgen_sample02_multiqueue.sh -i eth4 -m 00:1B:21:3C:9D:F8 -t 4

Usage: ./pktgen_sample02_multiqueue.sh [-vx] -i ethX
  -i : ($DEV)       output interface/device (required)
  -s : ($PKT_SIZE)  packet size
  -d : ($DEST_IP)   destination IP
  -m : ($DST_MAC)   destination MAC-addr
  -t : ($THREADS)   threads to start
  -c : ($SKB_CLONE) SKB clones send before alloc new SKB
  -b : ($BURST)     HW level bursting of SKBs
  -v : ($VERBOSE)   verbose
  -x : ($DEBUG)     debug

Removing pktgen.conf-2-1 and pktgen.conf-2-2 as these examples
should be covered now.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-22 23:59:17 -04:00
Jesper Dangaard Brouer 6f09479758 pktgen: add sample script pktgen_sample01_simple.sh
Add the first basic pktgen samples script pktgen_sample01_simple.sh,
which demonstrates the a simple use of the helper functions.
Removing pktgen.conf-1-1 as that example should be covered now.

The naming scheme pktgen_sampleNN, where NN is a number, should encourage
reading the samples in a specific order.

Script cause pktgen sending with a single thread and single interface,
and introduce flow variation via random UDP source port.

Usage example and help:
 ./pktgen_sample01_simple.sh -i eth4 -m 00:1B:21:3C:9D:F8 -d 192.168.8.2

Usage: ./pktgen_sample01_simple.sh [-vx] -i ethX
  -i : ($DEV)       output interface/device (required)
  -s : ($PKT_SIZE)  packet size
  -d : ($DEST_IP)   destination IP
  -m : ($DST_MAC)   destination MAC-addr
  -c : ($SKB_CLONE) SKB clones send before alloc new SKB
  -v : ($VERBOSE)   verbose
  -x : ($DEBUG)     debug

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-22 23:59:17 -04:00
Jesper Dangaard Brouer b64b0d1e64 pktgen: new pktgen helper functions for samples scripts
Preparing for removing existing samples/pktgen/ scripts, and
replacing these with easier to use samples.

This commit provides two helper shell files, that can
be "included" by shell source'ing. Namely "functions.sh"
and "parameters.sh".

The parameters.sh file support easy and consistant parameter
parsing across the sample scripts.  Usage example is printed on
errors.

The functions.sh file provides, three new shell functions for
configuring the different components of pktgen: pg_ctrl(),
pg_thread() and pg_set().  A slightly improved version of the old
pgset() function is also provided for backwards compat.

The new functions correspond to pktgens different components.
 * pg_ctrl()   control "pgctrl" (/proc/net/pktgen/pgctrl)
 * pg_thread() control the kernel threads and binding to devices
 * pg_set()    control setup of individual devices

These changes are borrowed from:
 https://github.com/netoptimizer/network-testing/tree/master/pktgen

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-22 23:59:16 -04:00
Alexei Starovoitov 530b2c8619 samples/bpf: bpf_tail_call example for networking
Usage:
$ sudo ./sockex3
IP     src.port -> dst.port               bytes      packets
127.0.0.1.42010 -> 127.0.0.1.12865         1568            8
127.0.0.1.59526 -> 127.0.0.1.33778     11422636       173070
127.0.0.1.33778 -> 127.0.0.1.59526  11260224828       341974
127.0.0.1.12865 -> 127.0.0.1.42010         1832           12
IP     src.port -> dst.port               bytes      packets
127.0.0.1.42010 -> 127.0.0.1.12865         1568            8
127.0.0.1.59526 -> 127.0.0.1.33778     23198092       351486
127.0.0.1.33778 -> 127.0.0.1.59526  22972698518       698616
127.0.0.1.12865 -> 127.0.0.1.42010         1832           12

this example is similar to sockex2 in a way that it accumulates per-flow
statistics, but it does packet parsing differently.
sockex2 inlines full packet parser routine into single bpf program.
This sockex3 example have 4 independent programs that parse vlan, mpls, ip, ipv6
and one main program that starts the process.
bpf_tail_call() mechanism allows each program to be small and be called
on demand potentially multiple times, so that many vlan, mpls, ip in ip,
gre encapsulations can be parsed. These and other protocol parsers can
be added or removed at runtime. TLVs can be parsed in similar manner.
Note, tail_call_cnt dynamic check limits the number of tail calls to 32.

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-21 17:07:59 -04:00
Alexei Starovoitov 5bacd7805a samples/bpf: bpf_tail_call example for tracing
kprobe example that demonstrates how future seccomp programs may look like.
It attaches to seccomp_phase1() function and tail-calls other BPF programs
depending on syscall number.

Existing optimized classic BPF seccomp programs generated by Chrome look like:
if (sd.nr < 121) {
  if (sd.nr < 57) {
    if (sd.nr < 22) {
      if (sd.nr < 7) {
        if (sd.nr < 4) {
          if (sd.nr < 1) {
            check sys_read
          } else {
            if (sd.nr < 3) {
              check sys_write and sys_open
            } else {
              check sys_close
            }
          }
        } else {
      } else {
    } else {
  } else {
} else {
}

the future seccomp using native eBPF may look like:
  bpf_tail_call(&sd, &syscall_jmp_table, sd.nr);
which is simpler, faster and leaves more room for per-syscall checks.

Usage:
$ sudo ./tracex5
<...>-366   [001] d...     4.870033: : read(fd=1, buf=00007f6d5bebf000, size=771)
<...>-369   [003] d...     4.870066: : mmap
<...>-369   [003] d...     4.870077: : syscall=110 (one of get/set uid/pid/gid)
<...>-369   [003] d...     4.870089: : syscall=107 (one of get/set uid/pid/gid)
   sh-369   [000] d...     4.891740: : read(fd=0, buf=00000000023d1000, size=512)
   sh-369   [000] d...     4.891747: : write(fd=1, buf=00000000023d3000, size=512)
   sh-369   [000] d...     4.891747: : read(fd=1, buf=00000000023d3000, size=512)

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-21 17:07:59 -04:00
Brenden Blanco b88c06e36d samples/bpf: fix in-source build of samples with clang
in-source build of 'make samples/bpf/' was incorrectly
using default compiler instead of invoking clang/llvm.
out-of-source build was ok.

Fixes: a80857822b ("samples: bpf: trivial eBPF program in C")
Signed-off-by: Brenden Blanco <bblanco@plumgrid.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 23:15:25 -04:00
Alexei Starovoitov 725f9dcd58 bpf: fix two bugs in verification logic when accessing 'ctx' pointer
1.
first bug is a silly mistake. It broke tracing examples and prevented
simple bpf programs from loading.

In the following code:
if (insn->imm == 0 && BPF_SIZE(insn->code) == BPF_W) {
} else if (...) {
  // this part should have been executed when
  // insn->code == BPF_W and insn->imm != 0
}

Obviously it's not doing that. So simple instructions like:
r2 = *(u64 *)(r1 + 8)
will be rejected. Note the comments in the code around these branches
were and still valid and indicate the true intent.

Replace it with:
if (BPF_SIZE(insn->code) != BPF_W)
  continue;

if (insn->imm == 0) {
} else if (...) {
  // now this code will be executed when
  // insn->code == BPF_W and insn->imm != 0
}

2.
second bug is more subtle.
If malicious code is using the same dest register as source register,
the checks designed to prevent the same instruction to be used with different
pointer types will fail to trigger, since we were assigning src_reg_type
when it was already overwritten by check_mem_access().
The fix is trivial. Just move line:
src_reg_type = regs[insn->src_reg].type;
before check_mem_access().
Add new 'access skb fields bad4' test to check this case.

Fixes: 9bac3d6d54 ("bpf: allow extended BPF programs access skb fields")
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-16 14:08:49 -04:00
Alexei Starovoitov a166151cbe bpf: fix bpf helpers to use skb->mac_header relative offsets
For the short-term solution, lets fix bpf helper functions to use
skb->mac_header relative offsets instead of skb->data in order to
get the same eBPF programs with cls_bpf and act_bpf work on ingress
and egress qdisc path. We need to ensure that mac_header is set
before calling into programs. This is effectively the first option
from below referenced discussion.

More long term solution for LD_ABS|LD_IND instructions will be more
intrusive but also more beneficial than this, and implemented later
as it's too risky at this point in time.

I.e., we plan to look into the option of moving skb_pull() out of
eth_type_trans() and into netif_receive_skb() as has been suggested
as second option. Meanwhile, this solution ensures ingress can be
used with eBPF, too, and that we won't run into ABI troubles later.
For dealing with negative offsets inside eBPF helper functions,
we've implemented bpf_skb_clone_unwritable() to test for unwriteable
headers.

Reference: http://thread.gmane.org/gmane.linux.network/359129/focus=359694
Fixes: 608cd71a9c ("tc: bpf: generalize pedit action")
Fixes: 91bc4822c3 ("tc: bpf: add checksum helpers")
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-16 14:08:49 -04:00
Linus Torvalds 6c373ca893 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Add BQL support to via-rhine, from Tino Reichardt.

 2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers
    can support hw switch offloading.  From Floria Fainelli.

 3) Allow 'ip address' commands to initiate multicast group join/leave,
    from Madhu Challa.

 4) Many ipv4 FIB lookup optimizations from Alexander Duyck.

 5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel
    Borkmann.

 6) Remove the ugly compat support in ARP for ugly layers like ax25,
    rose, etc.  And use this to clean up the neigh layer, then use it to
    implement MPLS support.  All from Eric Biederman.

 7) Support L3 forwarding offloading in switches, from Scott Feldman.

 8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed
    up route lookups even further.  From Alexander Duyck.

 9) Many improvements and bug fixes to the rhashtable implementation,
    from Herbert Xu and Thomas Graf.  In particular, in the case where
    an rhashtable user bulk adds a large number of items into an empty
    table, we expand the table much more sanely.

10) Don't make the tcp_metrics hash table per-namespace, from Eric
    Biederman.

11) Extend EBPF to access SKB fields, from Alexei Starovoitov.

12) Split out new connection request sockets so that they can be
    established in the main hash table.  Much less false sharing since
    hash lookups go direct to the request sockets instead of having to
    go first to the listener then to the request socks hashed
    underneath.  From Eric Dumazet.

13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk.

14) Support stable privacy address generation for RFC7217 in IPV6.  From
    Hannes Frederic Sowa.

15) Hash network namespace into IP frag IDs, also from Hannes Frederic
    Sowa.

16) Convert PTP get/set methods to use 64-bit time, from Richard
    Cochran.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits)
  fm10k: Bump driver version to 0.15.2
  fm10k: corrected VF multicast update
  fm10k: mbx_update_max_size does not drop all oversized messages
  fm10k: reset head instead of calling update_max_size
  fm10k: renamed mbx_tx_dropped to mbx_tx_oversized
  fm10k: update xcast mode before synchronizing multicast addresses
  fm10k: start service timer on probe
  fm10k: fix function header comment
  fm10k: comment next_vf_mbx flow
  fm10k: don't handle mailbox events in iov_event path and always process mailbox
  fm10k: use separate workqueue for fm10k driver
  fm10k: Set PF queues to unlimited bandwidth during virtualization
  fm10k: expose tx_timeout_count as an ethtool stat
  fm10k: only increment tx_timeout_count in Tx hang path
  fm10k: remove extraneous "Reset interface" message
  fm10k: separate PF only stats so that VF does not display them
  fm10k: use hw->mac.max_queues for stats
  fm10k: only show actual queues, not the maximum in hardware
  fm10k: allow creation of VLAN on default vid
  fm10k: fix unused warnings
  ...
2015-04-15 09:00:47 -07:00
Linus Torvalds 6c8a53c9e6 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf changes from Ingo Molnar:
 "Core kernel changes:

   - One of the more interesting features in this cycle is the ability
     to attach eBPF programs (user-defined, sandboxed bytecode executed
     by the kernel) to kprobes.

     This allows user-defined instrumentation on a live kernel image
     that can never crash, hang or interfere with the kernel negatively.
     (Right now it's limited to root-only, but in the future we might
     allow unprivileged use as well.)

     (Alexei Starovoitov)

   - Another non-trivial feature is per event clockid support: this
     allows, amongst other things, the selection of different clock
     sources for event timestamps traced via perf.

     This feature is sought by people who'd like to merge perf generated
     events with external events that were measured with different
     clocks:

       - cluster wide profiling

       - for system wide tracing with user-space events,

       - JIT profiling events

     etc.  Matching perf tooling support is added as well, available via
     the -k, --clockid <clockid> parameter to perf record et al.

     (Peter Zijlstra)

  Hardware enablement kernel changes:

   - x86 Intel Processor Trace (PT) support: which is a hardware tracer
     on steroids, available on Broadwell CPUs.

     The hardware trace stream is directly output into the user-space
     ring-buffer, using the 'AUX' data format extension that was added
     to the perf core to support hardware constraints such as the
     necessity to have the tracing buffer physically contiguous.

     This patch-set was developed for two years and this is the result.
     A simple way to make use of this is to use BTS tracing, the PT
     driver emulates BTS output - available via the 'intel_bts' PMU.
     More explicit PT specific tooling support is in the works as well -
     will probably be ready by 4.2.

     (Alexander Shishkin, Peter Zijlstra)

   - x86 Intel Cache QoS Monitoring (CQM) support: this is a hardware
     feature of Intel Xeon CPUs that allows the measurement and
     allocation/partitioning of caches to individual workloads.

     These kernel changes expose the measurement side as a new PMU
     driver, which exposes various QoS related PMU events.  (The
     partitioning change is work in progress and is planned to be merged
     as a cgroup extension.)

     (Matt Fleming, Peter Zijlstra; CPU feature detection by Peter P
     Waskiewicz Jr)

   - x86 Intel Haswell LBR call stack support: this is a new Haswell
     feature that allows the hardware recording of call chains, plus
     tooling support.  To activate this feature you have to enable it
     via the new 'lbr' call-graph recording option:

        perf record --call-graph lbr
        perf report

     or:

        perf top --call-graph lbr

     This hardware feature is a lot faster than stack walk or dwarf
     based unwinding, but has some limitations:

       - It reuses the current LBR facility, so LBR call stack and
         branch record can not be enabled at the same time.

       - It is only available for user-space callchains.

     (Yan, Zheng)

   - x86 Intel Broadwell CPU support and various event constraints and
     event table fixes for earlier models.

     (Andi Kleen)

   - x86 Intel HT CPUs event scheduling workarounds.  This is a complex
     CPU bug affecting the SNB,IVB,HSW families that results in counter
     value corruption.  The mitigation code is automatically enabled and
     is transparent.

     (Maria Dimakopoulou, Stephane Eranian)

  The perf tooling side had a ton of changes in this cycle as well, so
  I'm only able to list the user visible changes here, in addition to
  the tooling changes outlined above:

  User visible changes affecting all tools:

      - Improve support of compressed kernel modules (Jiri Olsa)
      - Save DSO loading errno to better report errors (Arnaldo Carvalho de Melo)
      - Bash completion for subcommands (Yunlong Song)
      - Add 'I' event modifier for perf_event_attr.exclude_idle bit (Jiri Olsa)
      - Support missing -f to override perf.data file ownership. (Yunlong Song)
      - Show the first event with an invalid filter (David Ahern, Arnaldo Carvalho de Melo)

  User visible changes in individual tools:

    'perf data':

        New tool for converting perf.data to other formats, initially
        for the CTF (Common Trace Format) from LTTng (Jiri Olsa,
        Sebastian Siewior)

    'perf diff':

        Add --kallsyms option (David Ahern)

    'perf list':

        Allow listing events with 'tracepoint' prefix (Yunlong Song)

        Sort the output of the command (Yunlong Song)

    'perf kmem':

        Respect -i option (Jiri Olsa)

        Print big numbers using thousands' group (Namhyung Kim)

        Allow -v option (Namhyung Kim)

        Fix alignment of slab result table (Namhyung Kim)

    'perf probe':

        Support multiple probes on different binaries on the same command line (Masami Hiramatsu)

        Support unnamed union/structure members data collection. (Masami Hiramatsu)

        Check kprobes blacklist when adding new events. (Masami Hiramatsu)

    'perf record':

        Teach 'perf record' about perf_event_attr.clockid (Peter Zijlstra)

        Support recording running/enabled time (Andi Kleen)

    'perf sched':

        Improve the performance of 'perf sched replay' on high CPU core count machines (Yunlong Song)

    'perf report' and 'perf top':

        Allow annotating entries in callchains in the hists browser (Arnaldo Carvalho de Melo)

        Indicate which callchain entries are annotated in the
        TUI hists browser (Arnaldo Carvalho de Melo)

        Add pid/tid filtering to 'report' and 'script' commands (David Ahern)

        Consider PERF_RECORD_ events with cpumode == 0 in 'perf top', removing one
        cause of long term memory usage buildup, i.e. not processing PERF_RECORD_EXIT
        events (Arnaldo Carvalho de Melo)

    'perf stat':

        Report unsupported events properly (Suzuki K. Poulose)

        Output running time and run/enabled ratio in CSV mode (Andi Kleen)

    'perf trace':

        Handle legacy syscalls tracepoints (David Ahern, Arnaldo Carvalho de Melo)

        Only insert blank duration bracket when tracing syscalls (Arnaldo Carvalho de Melo)

        Filter out the trace pid when no threads are specified (Arnaldo Carvalho de Melo)

        Dump stack on segfaults (Arnaldo Carvalho de Melo)

        No need to explicitely enable evsels for workload started from perf, let it
        be enabled via perf_event_attr.enable_on_exec, removing some events that take
        place in the 'perf trace' before a workload is really started by it.
        (Arnaldo Carvalho de Melo)

        Allow mixing with tracepoints and suppressing plain syscalls. (Arnaldo Carvalho de Melo)

  There's also been a ton of infrastructure work done, such as the
  split-out of perf's build system into tools/build/ and other changes -
  see the shortlog and changelog for details"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (358 commits)
  perf/x86/intel/pt: Clean up the control flow in pt_pmu_hw_init()
  perf evlist: Fix type for references to data_head/tail
  perf probe: Check the orphaned -x option
  perf probe: Support multiple probes on different binaries
  perf buildid-list: Fix segfault when show DSOs with hits
  perf tools: Fix cross-endian analysis
  perf tools: Fix error path to do closedir() when synthesizing threads
  perf tools: Fix synthesizing fork_event.ppid for non-main thread
  perf tools: Add 'I' event modifier for exclude_idle bit
  perf report: Don't call map__kmap if map is NULL.
  perf tests: Fix attr tests
  perf probe: Fix ARM 32 building error
  perf tools: Merge all perf_event_attr print functions
  perf record: Add clockid parameter
  perf sched replay: Use replay_repeat to calculate the runavg of cpu usage instead of the default value 10
  perf sched replay: Support using -f to override perf.data file ownership
  perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files
  perf sched replay: Handle the dead halt of sem_wait when create_tasks() fails for any task
  perf sched replay: Fix the segmentation fault problem caused by pr_err in threads
  perf sched replay: Realloc the memory of pid_to_task stepwise to adapt to the different pid_max configurations
  ...
2015-04-14 14:37:47 -07:00
Linus Torvalds eeee78cf77 Some clean ups and small fixes, but the biggest change is the addition
of the TRACE_DEFINE_ENUM() macro that can be used by tracepoints.
 
 Tracepoints have helper functions for the TP_printk() called
 __print_symbolic() and __print_flags() that lets a numeric number be
 displayed as a a human comprehensible text. What is placed in the
 TP_printk() is also shown in the tracepoint format file such that
 user space tools like perf and trace-cmd can parse the binary data
 and express the values too. Unfortunately, the way the TRACE_EVENT()
 macro works, anything placed in the TP_printk() will be shown pretty
 much exactly as is. The problem arises when enums are used. That's
 because unlike macros, enums will not be changed into their values
 by the C pre-processor. Thus, the enum string is exported to the
 format file, and this makes it useless for user space tools.
 
 The TRACE_DEFINE_ENUM() solves this by converting the enum strings
 in the TP_printk() format into their number, and that is what is
 shown to user space. For example, the tracepoint tlb_flush currently
 has this in its format file:
 
      __print_symbolic(REC->reason,
         { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" },
         { TLB_REMOTE_SHOOTDOWN, "remote shootdown" },
         { TLB_LOCAL_SHOOTDOWN, "local shootdown" },
         { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" })
 
 After adding:
 
      TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH);
      TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN);
      TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN);
      TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN);
 
 Its format file will contain this:
 
      __print_symbolic(REC->reason,
         { 0, "flush on task switch" },
         { 1, "remote shootdown" },
         { 2, "local shootdown" },
         { 3, "local mm shootdown" })
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVLBTuAAoJEEjnJuOKh9ldjHMIALdRS755TXCZGOf0r7O2akOR
 wMPeum7C+ae1mH+jCsJKUC0/jUfQKaMt/UxoHlipDgcGg8kD2jtGnGCw4Xlwvdsr
 y4rFmcTRSl1mo0zDSsg6ujoupHlVYN0+JPjrd7S3cv/llJoY49zcanNLF7S2XLeM
 dZCtWRLWYpBiWO68ai6AqJTnE/eGFIqBI048qb5Eg8dbK243SSeSIf9Ywhb+VsA+
 aq6F7cWI/H6j4tbeza8tAN19dcwenDro5EfCDY8ARQHJu1f6Y3+DLf2imjkd6Aiu
 JVAoGIjHIpI+djwCZC1u4gi4urjfOqYartrM3Q54tb3YWYqHeNqP2ASI2a4EpYk=
 =Ixwt
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "Some clean ups and small fixes, but the biggest change is the addition
  of the TRACE_DEFINE_ENUM() macro that can be used by tracepoints.

  Tracepoints have helper functions for the TP_printk() called
  __print_symbolic() and __print_flags() that lets a numeric number be
  displayed as a a human comprehensible text.  What is placed in the
  TP_printk() is also shown in the tracepoint format file such that user
  space tools like perf and trace-cmd can parse the binary data and
  express the values too.  Unfortunately, the way the TRACE_EVENT()
  macro works, anything placed in the TP_printk() will be shown pretty
  much exactly as is.  The problem arises when enums are used.  That's
  because unlike macros, enums will not be changed into their values by
  the C pre-processor.  Thus, the enum string is exported to the format
  file, and this makes it useless for user space tools.

  The TRACE_DEFINE_ENUM() solves this by converting the enum strings in
  the TP_printk() format into their number, and that is what is shown to
  user space.  For example, the tracepoint tlb_flush currently has this
  in its format file:

     __print_symbolic(REC->reason,
        { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" },
        { TLB_REMOTE_SHOOTDOWN, "remote shootdown" },
        { TLB_LOCAL_SHOOTDOWN, "local shootdown" },
        { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" })

  After adding:

     TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH);
     TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN);
     TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN);
     TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN);

  Its format file will contain this:

     __print_symbolic(REC->reason,
        { 0, "flush on task switch" },
        { 1, "remote shootdown" },
        { 2, "local shootdown" },
        { 3, "local mm shootdown" })"

* tag 'trace-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits)
  tracing: Add enum_map file to show enums that have been mapped
  writeback: Export enums used by tracepoint to user space
  v4l: Export enums used by tracepoints to user space
  SUNRPC: Export enums in tracepoints to user space
  mm: tracing: Export enums in tracepoints to user space
  irq/tracing: Export enums in tracepoints to user space
  f2fs: Export the enums in the tracepoints to userspace
  net/9p/tracing: Export enums in tracepoints to userspace
  x86/tlb/trace: Export enums in used by tlb_flush tracepoint
  tracing/samples: Update the trace-event-sample.h with TRACE_DEFINE_ENUM()
  tracing: Allow for modules to convert their enums to values
  tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values
  tracing: Update trace-event-sample with TRACE_SYSTEM_VAR documentation
  tracing: Give system name a pointer
  brcmsmac: Move each system tracepoints to their own header
  iwlwifi: Move each system tracepoints to their own header
  mac80211: Move message tracepoints to their own header
  tracing: Add TRACE_SYSTEM_VAR to xhci-hcd
  tracing: Add TRACE_SYSTEM_VAR to kvm-s390
  tracing: Add TRACE_SYSTEM_VAR to intel-sst
  ...
2015-04-14 10:49:03 -07:00
Linus Torvalds 8de29a35dc Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:

 - quite a few firmware fixes for RMI driver by Andrew Duggan

 - huion and uclogic drivers have been substantially overlaping in
   functionality laterly.  This redundancy is fixed by hid-huion driver
   being merged into hid-uclogic; work done by Benjamin Tissoires and
   Nikolai Kondrashov

 - i2c-hid now supports ACPI GPIO interrupts; patch from Mika Westerberg

 - Some of the quirks, that got separated into individual drivers, have
   historically had EXPERT dependency.  As HID subsystem matured (as
   well as the individual drivers), this made less and less sense.  This
   dependency is now being removed by patch from Jean Delvare

 - Logitech lg4ff driver received a couple of improvements for mode
   switching, by Michal Malý

 - multitouch driver now supports clickpads, patches by Benjamin
   Tissoires and Seth Forshee

 - hid-sensor framework received a substantial update; namely support
   for Custom and Generic pages is being added; work done by Srinivas
   Pandruvada

 - wacom driver received substantial update; it now supports
   i2c-conntected devices (Mika Westerberg), Bamboo PADs are now
   properly supported (Benjamin Tissoires), much improved battery
   reporting (Jason Gerecke) and pen proximity cleanups (Ping Cheng)

 - small assorted fixes and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits)
  HID: sensor: Update document for custom sensor
  HID: sensor: Custom and Generic sensor support
  HID: debug: fix error handling in hid_debug_events_read()
  Input - mt: Fix input_mt_get_slot_by_key
  HID: logitech-hidpp: fix error return code
  HID: wacom: Add support for Cintiq 13HD Touch
  HID: logitech-hidpp: add a module parameter to keep firmware gestures
  HID: usbhid: yet another mouse with ALWAYS_POLL
  HID: usbhid: more mice with ALWAYS_POLL
  HID: wacom: set stylus_in_proximity before checking touch_down
  HID: wacom: use wacom_wac_finger_count_touches to set touch_down
  HID: wacom: remove hardcoded WACOM_QUIRK_MULTI_INPUT
  HID: pidff: effect can't be NULL
  HID: add quirk for PIXART OEM mouse used by HP
  HID: add HP OEM mouse to quirk ALWAYS_POLL
  HID: wacom: ask for a in-prox report when it was missed
  HID: hid-sensor-hub: Fix sparse warning
  HID: hid-sensor-hub: fix attribute read for logical usage id
  HID: plantronics: fix Kconfig default
  HID: pidff: support more than one concurrent effect
  ...
2015-04-14 09:25:26 -07:00
Jiri Kosina 05f6d02521 Merge branches 'for-4.0/upstream-fixes', 'for-4.1/genius', 'for-4.1/huion-uclogic-merge', 'for-4.1/i2c-hid', 'for-4.1/kconfig-drop-expert-dependency', 'for-4.1/logitech', 'for-4.1/multitouch', 'for-4.1/rmi', 'for-4.1/sony', 'for-4.1/upstream' and 'for-4.1/wacom' into for-linus 2015-04-13 23:41:15 +02:00
Steven Rostedt (Red Hat) 32eb3d0d09 tracing/samples: Update the trace-event-sample.h with TRACE_DEFINE_ENUM()
Document the use of TRACE_DEFINE_ENUM() by adding enums to the
trace-event-sample.h and using this macro to convert them in the format
files.

Also update the comments and sho the use of __print_symbolic() and
__print_flags() as well as adding comments abount __print_array().

Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org

Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-04-08 09:39:58 -04:00
Steven Rostedt (Red Hat) 889204278c tracing: Update trace-event-sample with TRACE_SYSTEM_VAR documentation
Add documentation about TRACE_SYSTEM needing to be alpha-numeric or with
underscores, and that if it is not, then the use of TRACE_SYSTEM_VAR is
required to make something that is.

An example of this is shown in samples/trace_events/trace-events-sample.h

Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org

Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-04-08 09:39:55 -04:00
Alexei Starovoitov 91bc4822c3 tc: bpf: add checksum helpers
Commit 608cd71a9c ("tc: bpf: generalize pedit action") has added the
possibility to mangle packet data to BPF programs in the tc pipeline.
This patch adds two helpers bpf_l3_csum_replace() and bpf_l4_csum_replace()
for fixing up the protocol checksums after the packet mangling.

It also adds 'flags' argument to bpf_skb_store_bytes() helper to avoid
unnecessary checksum recomputations when BPF programs adjusting l3/l4
checksums and documents all three helpers in uapi header.

Moreover, a sample program is added to show how BPF programs can make use
of the mangle and csum helpers.

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06 16:42:35 -04:00
Alexei Starovoitov 9811e35359 samples/bpf: Add kmem_alloc()/free() tracker tool
One BPF program attaches to kmem_cache_alloc_node() and
remembers all allocated objects in the map.
Another program attaches to kmem_cache_free() and deletes
corresponding object from the map.

User space walks the map every second and prints any objects
which are older than 1 second.

Usage:

	$ sudo tracex4

Then start few long living processes. The 'tracex4' will print
something like this:

	obj 0xffff880465928000 is 13sec old was allocated at ip ffffffff8105dc32
	obj 0xffff88043181c280 is 13sec old was allocated at ip ffffffff8105dc32
	obj 0xffff880465848000 is  8sec old was allocated at ip ffffffff8105dc32
	obj 0xffff8804338bc280 is 15sec old was allocated at ip ffffffff8105dc32

	$ addr2line -fispe vmlinux ffffffff8105dc32
	do_fork at fork.c:1665

As soon as processes exit the memory is reclaimed and 'tracex4'
prints nothing.

Similar experiment can be done with the __kmalloc()/kfree() pair.

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1427312966-8434-10-git-send-email-ast@plumgrid.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02 13:25:51 +02:00
Alexei Starovoitov 5c7fc2d27d samples/bpf: Add IO latency analysis (iosnoop/heatmap) tool
BPF C program attaches to
blk_mq_start_request()/blk_update_request() kprobe events to
calculate IO latency.

For every completed block IO event it computes the time delta
in nsec and records in a histogram map:

	map[log10(delta)*10]++

User space reads this histogram map every 2 seconds and prints
it as a 'heatmap' using gray shades of text terminal. Black
spaces have many events and white spaces have very few events.
Left most space is the smallest latency, right most space is
the largest latency in the range.

Usage:

	$ sudo ./tracex3
	and do 'sudo dd if=/dev/sda of=/dev/null' in other terminal.

Observe IO latencies and how different activity (like 'make
kernel') affects it.

Similar experiments can be done for network transmit latencies,
syscalls, etc.

'-t' flag prints the heatmap using normal ascii characters:

$ sudo ./tracex3 -t
  heatmap of IO latency
  # - many events with this latency
    - few events
	|1us      |10us     |100us    |1ms      |10ms     |100ms    |1s |10s
				 *ooo. *O.#.                                    # 221
			      .  *#     .                                       # 125
				 ..   .o#*..                                    # 55
			    .  . .  .  .#O                                      # 37
				 .#                                             # 175
				       .#*.                                     # 37
				  #                                             # 199
		      .              . *#*.                                     # 55
				       *#..*                                    # 42
				  #                                             # 266
			      ...***Oo#*OO**o#* .                               # 629
				  #                                             # 271
				      . .#o* o.*o*                              # 221
				. . o* *#O..                                    # 50

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1427312966-8434-9-git-send-email-ast@plumgrid.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02 13:25:51 +02:00
Alexei Starovoitov d822a19268 samples/bpf: Add counting example for kfree_skb() function calls and the write() syscall
this example has two probes in one C file that attach to
different kprove events and use two different maps.

1st probe is x64 specific equivalent of dropmon. It attaches to
kfree_skb, retrevies 'ip' address of kfree_skb() caller and
counts number of packet drops at that 'ip' address. User space
prints 'location - count' map every second.

2nd probe attaches to kprobe:sys_write and computes a histogram
of different write sizes

Usage:
	$ sudo tracex2
	location 0xffffffff81695995 count 1
	location 0xffffffff816d0da9 count 2

	location 0xffffffff81695995 count 2
	location 0xffffffff816d0da9 count 2

	location 0xffffffff81695995 count 3
	location 0xffffffff816d0da9 count 2

	557145+0 records in
	557145+0 records out
	285258240 bytes (285 MB) copied, 1.02379 s, 279 MB/s
		   syscall write() stats
	     byte_size       : count     distribution
	       1 -> 1        : 3        |                                      |
	       2 -> 3        : 0        |                                      |
	       4 -> 7        : 0        |                                      |
	       8 -> 15       : 0        |                                      |
	      16 -> 31       : 2        |                                      |
	      32 -> 63       : 3        |                                      |
	      64 -> 127      : 1        |                                      |
	     128 -> 255      : 1        |                                      |
	     256 -> 511      : 0        |                                      |
	     512 -> 1023     : 1118968  |************************************* |

Ctrl-C at any time. Kernel will auto cleanup maps and programs

	$ addr2line -ape ./bld_x64/vmlinux 0xffffffff81695995
	0xffffffff816d0da9 0xffffffff81695995:
	./bld_x64/../net/ipv4/icmp.c:1038 0xffffffff816d0da9:
	./bld_x64/../net/unix/af_unix.c:1231

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1427312966-8434-8-git-send-email-ast@plumgrid.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02 13:25:50 +02:00
Alexei Starovoitov b896c4f95a samples/bpf: Add simple non-portable kprobe filter example
tracex1_kern.c - C program compiled into BPF.

It attaches to kprobe:netif_receive_skb()

When skb->dev->name == "lo", it prints sample debug message into
trace_pipe via bpf_trace_printk() helper function.

tracex1_user.c - corresponding user space component that:
  - loads BPF program via bpf() syscall
  - opens kprobes:netif_receive_skb event via perf_event_open()
    syscall
  - attaches the program to event via ioctl(event_fd,
    PERF_EVENT_IOC_SET_BPF, prog_fd);
  - prints from trace_pipe

Note, this BPF program is non-portable. It must be recompiled
with current kernel headers. kprobe is not a stable ABI and
BPF+kprobe scripts may no longer be meaningful when kernel
internals change.

No matter in what way the kernel changes, neither the kprobe,
nor the BPF program can ever crash or corrupt the kernel,
assuming the kprobes, perf and BPF subsystem has no bugs.

The verifier will detect that the program is using
bpf_trace_printk() and the kernel will print 'this is a DEBUG
kernel' warning banner, which means that bpf_trace_printk()
should be used for debugging of the BPF program only.

Usage:
$ sudo tracex1
            ping-19826 [000] d.s2 63103.382648: : skb ffff880466b1ca00 len 84
            ping-19826 [000] d.s2 63103.382684: : skb ffff880466b1d300 len 84

            ping-19826 [000] d.s2 63104.382533: : skb ffff880466b1ca00 len 84
            ping-19826 [000] d.s2 63104.382594: : skb ffff880466b1d300 len 84

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1427312966-8434-7-git-send-email-ast@plumgrid.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02 13:25:50 +02:00
Greg Kroah-Hartman 07afb6ace3 samples/kobject: be explicit in the module license
Rusty pointed out that the module license should be "GPL v2" to properly
match the notice at the top of the files, so make that change.

Reported-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-25 13:41:42 +01:00
Rastislav Barlik 5fd637e7a7 samples/kobject: Use kstrtoint instead of sscanf
Use kstrtoint function instead of sscanf and check for return values.

Signed-off-by: Rastislav Barlik <barlik@zoho.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-25 13:40:31 +01:00
Alexei Starovoitov c249739579 bpf: allow BPF programs access 'protocol' and 'vlan_tci' fields
as a follow on to patch 70006af955 ("bpf: allow eBPF access skb fields")
this patch allows 'protocol' and 'vlan_tci' fields to be accessible
from extended BPF programs.

The usage of 'protocol', 'vlan_present' and 'vlan_tci' fields is the same as
corresponding SKF_AD_PROTOCOL, SKF_AD_VLAN_TAG_PRESENT and SKF_AD_VLAN_TAG
accesses in classic BPF.

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17 15:06:31 -04:00
Alexei Starovoitov 614cd3bd37 samples: bpf: add skb->field examples and tests
- modify sockex1 example to count number of bytes in outgoing packets
- modify sockex2 example to count number of bytes and packets per flow
- add 4 stress tests that exercise 'skb->field' code path of verifier

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-15 22:02:28 -04:00
Pavel Machek 04303f8ec1 HID: samples/hidraw: make it possible to select device
Makefile that can actually build the example, and allow selecting device to
work on.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-15 10:11:21 -04:00
Daniel Borkmann f1a66f85b7 ebpf: export BPF_PSEUDO_MAP_FD to uapi
We need to export BPF_PSEUDO_MAP_FD to user space, as it's used in the
ELF BPF loader where instructions are being loaded that need map fixups.

An initial stage loads all maps into the kernel, and later on replaces
related instructions in the eBPF blob with BPF_PSEUDO_MAP_FD as source
register and the actual fd as immediate value.

The kernel verifier recognizes this keyword and replaces the map fd with
a real pointer internally.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 14:05:19 -05:00
Daniel Borkmann f91fe17e24 ebpf: remove kernel test stubs
Now that we have BPF_PROG_TYPE_SOCKET_FILTER up and running, we can
remove the test stubs which were added to get the verifier suite up.

We can just let the test cases probe under socket filter type instead.
In the fill/spill test case, we cannot (yet) access fields from the
context (skb), but we may adapt that test case in future.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 14:05:18 -05:00
Ben Hutchings 4062bd25f0 samples/pktgen: Show the results rather than just commenting where they are
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23 22:04:25 -05:00
Ben Hutchings 16b5d0c4a2 samples/pktgen: Trap SIGINT
Otherwise ^C stops the script, not just pktgen.

Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23 22:04:21 -05:00
Ben Hutchings db72aba30a samples/pktgen: Use bash as interpreter
These scripts use the non-POSIX 'function' and 'local' keywords so
they won't work with every /bin/sh.  We could drop 'function' as it is
a no-op, but 'local' makes for cleaner scripts.  Require use of bash.

Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23 22:04:10 -05:00
Ben Hutchings 06481f22c6 samples/pktgen: Remove setting of obsolete max_before_softirq parameter
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23 22:04:10 -05:00
Ben Hutchings 2ad1cdf2ea samples/pktgen: Correct comments about the thread config
They all claimed to be two CPU examples using eth1, eth2 but
that is only true in one case!

Rob Jones pointed out spelling and grammar errors here, which I've
also corrected.

Cc: Rob Jones <rob.jones@codethink.co.uk>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23 22:03:18 -05:00
Ben Hutchings 865367db65 samples/pktgen: Delete unused function pg()
This function is not used and wouldn't do anything useful as
pktgen does not have an 'inject' command.

Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23 22:03:18 -05:00
Ben Hutchings 7c95a9d962 samples/pktgen: Add sample scripts for pktgen facility
These are Robert Olsson's samples which used to be available from
<ftp://robur.slu.se/pub/Linux/net-development/pktgen-testing/examples/>
but currently are not.

Change the documentation to refer to these consistently as 'sample
scripts', matching the directory name used here.

Cc: Robert Olsson <robert@herjulf.se>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23 22:03:18 -05:00
Kees Cook 3a9af0bd34 samples/seccomp: improve label helper
Fixes a potential corruption with uninitialized stack memory in the
seccomp BPF sample program.

[akpm@linux-foundation.org: coding-style fixlet]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Robert Swiecki <swiecki@google.com>
Tested-by: Robert Swiecki <swiecki@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17 14:34:55 -08:00