Commit Graph

5185 Commits

Author SHA1 Message Date
Dmitry Fink c15bef3099 mmap: fix and tidy up overcommit page arithmetic
- shmem pages are not immediately available, but they are not
  potentially available either, even if we swap them out, they will just
  relocate from memory into swap, total amount of immediate and
  potentially available memory is not going to be affected, so we
  shouldn't count them as potentially free in the first place.

- nr_free_pages() is not an expensive operation anymore, there is no
  need to split the decision making in two halves and repeat code.

Signed-off-by: Dmitry Fink <dmitry.fink@palm.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:09 -07:00
Andrew Morton c9d8c3d089 mm/memblock.c: avoid abuse of RED_INACTIVE
RED_INACTIVE is a slab thing, and reusing it for memblock was
inappropriate, because memblock is dealing with phys_addr_t's which have a
Kconfigurable sizeof().

Create a new poison type for this application.  Fixes the sparse warning

    warning: cast truncates bits from constant value (9f911029d74e35b becomes 9d74e35b)

Reported-by: H Hartley Sweeten <hartleys@visionengravers.com>
Tested-by: H Hartley Sweeten <hartleys@visionengravers.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:09 -07:00
David Rientjes 11239836c0 oom: remove references to old badness() function
The badness() function in the oom killer was renamed to oom_badness() in
a63d83f427 ("oom: badness heuristic rewrite") since it is a globally
exported function for clarity.

The prototype for the old function still existed in linux/oom.h, so remove
it.  There are no existing users.

Also fixes documentation and comment references to badness() and adjusts
them accordingly.

Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:09 -07:00
Andrew Morton 6ac4752006 mm/memory.c: remove ZAP_BLOCK_SIZE
ZAP_BLOCK_SIZE became unused in the preemptible-mmu_gather work ("mm:
Remove i_mmap_lock lockbreak").  So zap it.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:09 -07:00
Chris Forbes 32f84528fb mm: hugetlb: fix coding style issues
Fix coding style issues flagged by checkpatch.pl

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Acked-by: Eric B Munson <emunson@mgebm.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:09 -07:00
Chris Wright d788e80a8c mm/huge_memory.c: minor lock simplification in __khugepaged_exit
The lock is released first thing in all three branches.  Simplify this by
unconditionally releasing lock and remove else clause which was only there
to be sure lock was released.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:09 -07:00
Daniel Kiper 1bb36fbd4d mm/page_cgroup.c: simplify code by using SECTION_ALIGN_UP() and SECTION_ALIGN_DOWN() macros
Commit a539f3533b ("mm: add SECTION_ALIGN_UP() and
SECTION_ALIGN_DOWN() macro") introduced the SECTION_ALIGN_UP() and
SECTION_ALIGN_DOWN() macros.  Use those macros to increase code
readability.

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:09 -07:00
WANG Cong 00a66d2974 mm: remove the leftovers of noswapaccount
In commit a2c8990aed ("memsw: remove noswapaccount kernel parameter"),
Michal forgot to remove some left pieces of noswapaccount in the tree,
this patch removes them all.

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:09 -07:00
KOSAKI Motohiro dd78553b5e pagewalk: fix code comment for THP
Commit bae9c19bf1 ("thp: split_huge_page_mm/vma") changed locking behavior
of walk_page_range().  Thus this patch changes the comment too.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:09 -07:00
KOSAKI Motohiro c27fe4c894 pagewalk: add locking-rule comments
Originally, walk_hugetlb_range() didn't require a caller take any lock.
But commit d33b9f45bd ("mm: hugetlb: fix hugepage memory leak in
walk_page_range") changed its rule.  Because it added find_vma() call in
walk_hugetlb_range().

Any locking-rule change commit should write a doc too.

[akpm@linux-foundation.org: clarify comment]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:08 -07:00
KOSAKI Motohiro 6c6d528043 pagewalk: don't look up vma if walk->hugetlb_entry is unused
Currently, walk_page_range() calls find_vma() every page table for walk
iteration.  but it's completely unnecessary if walk->hugetlb_entry is
unused.  And we don't have to assume find_vma() is a lightweight
operation.  So this patch checks the walk->hugetlb_entry and avoids the
find_vma() call if possible.

This patch also makes some cleanups.  1) remove ugly uninitialized_var()
and 2) #ifdef in function body.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:08 -07:00
KOSAKI Motohiro 4b6ddbf7ed pagewalk: fix walk_page_range() don't check find_vma() result properly
The doc of find_vma() says,

    /* Look up the first VMA which satisfies  addr < vm_end,  NULL if none. */
    struct vm_area_struct *find_vma(struct mm_struct *mm, unsigned long addr)
    {
     (snip)

Thus, caller should confirm whether the returned vma matches a desired one.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:08 -07:00
KOSAKI Motohiro 45ebb84025 mm: swap-token: add a comment for priority aging
Document some swap token aging design decisions.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:08 -07:00
KOSAKI Motohiro 53bb01f593 mm: swap-token: makes global variables to function local
global_faults and last_aging are only used in grab_swap_token().  Move
them into grab_swap_token().

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:08 -07:00
KOSAKI Motohiro e21c7ffd6f mm: swap-token: fix dead link
http://www.cs.wm.edu/~sjiang/token.pdf is now dead.  Replace it with an
alive alternative.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:08 -07:00
Daniel Kiper 9d0ad8ca43 mm: extend memory hotplug API to allow memory hotplug in virtual machines
This patch contains online_page_callback and apropriate functions for
registering/unregistering online page callbacks.  It allows to do some
machine specific tasks during online page stage which is required to
implement memory hotplug in virtual machines.  Currently this patch is
required by latest memory hotplug support for Xen balloon driver patch
which will be posted soon.

Additionally, originial online_page() function was splited into
following functions doing "atomic" operations:

  - __online_page_set_limits() - set new limits for memory management code,
  - __online_page_increment_counters() - increment totalram_pages and totalhigh_pages,
  - __online_page_free() - free page to allocator.

It was done to:
  - not duplicate existing code,
  - ease hotplug code devolpment by usage of well defined interface,
  - avoid stupid bugs which are unavoidable when the same code
    (by design) is developed in many places.

[akpm@linux-foundation.org: use explicit indirect-call syntax]
Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:08 -07:00
Peter Zijlstra ccb6108f5b mm/backing-dev.c: reset bdi min_ratio in bdi_unregister()
Vito said:

: The system has many usb disks coming and going day to day, with their
: respective bdi's having min_ratio set to 1 when inserted.  It works for
: some time until eventually min_ratio can no longer be set, even when the
: active set of bdi's seen in /sys/class/bdi/*/min_ratio doesn't add up to
: anywhere near 100.
:
: This then leads to an unrelated starvation problem caused by write-heavy
: fuse mounts being used atop the usb disks, a problem the min_ratio setting
: at the underlying devices bdi effectively prevents.

Fix this leakage by resetting the bdi min_ratio when unregistering the
BDI.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Reported-by: Vito Caputo <lkml@pengaru.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:07 -07:00
Ian Campbell 33dd4e0ec9 mm: make some struct page's const
These uses are read-only and in a subsequent patch I have a const struct
page in my hand...

[akpm@linux-foundation.org: fix warnings in lowmem_page_address()]
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:07 -07:00
Becky Bruce ee8f248d26 hugetlb: add phys addr to struct huge_bootmem_page
This is needed on HIGHMEM systems - we don't always have a virtual
address so store the physical address and map it in as needed.

[akpm@linux-foundation.org: cleanup]
Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:07 -07:00
Martin Schwidefsky 50a15981a1 [S390] reference bit testing for unmapped pages
On x86 a page without a mapper is by definition not referenced / old.
The s390 architecture keeps the reference bit in the storage key and
the current code will check the storage key for page without a mapper.
This leads to an interesting effect: the first time an s390 system
needs to write pages to swap it only finds referenced pages. This
causes a lot of pages to get added and written to the swap device.
To avoid this behaviour change page_referenced to query the storage
key only if there is a mapper of the page.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 10:48:00 +02:00
Linus Torvalds bbd9d6f7fb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (107 commits)
  vfs: use ERR_CAST for err-ptr tossing in lookup_instantiate_filp
  isofs: Remove global fs lock
  jffs2: fix IN_DELETE_SELF on overwriting rename() killing a directory
  fix IN_DELETE_SELF on overwriting rename() on ramfs et.al.
  mm/truncate.c: fix build for CONFIG_BLOCK not enabled
  fs:update the NOTE of the file_operations structure
  Remove dead code in dget_parent()
  AFS: Fix silly characters in a comment
  switch d_add_ci() to d_splice_alias() in "found negative" case as well
  simplify gfs2_lookup()
  jfs_lookup(): don't bother with . or ..
  get rid of useless dget_parent() in btrfs rename() and link()
  get rid of useless dget_parent() in fs/btrfs/ioctl.c
  fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlers
  drivers: fix up various ->llseek() implementations
  fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek
  Ext4: handle SEEK_HOLE/SEEK_DATA generically
  Btrfs: implement our own ->llseek
  fs: add SEEK_HOLE and SEEK_DATA flags
  reiserfs: make reiserfs default to barrier=flush
  ...

Fix up trivial conflicts in fs/xfs/linux-2.6/xfs_super.c due to the new
shrinker callout for the inode cache, that clashed with the xfs code to
start the periodic workers later.
2011-07-22 19:02:39 -07:00
Linus Torvalds 9e39264ed4 Merge branch 'x86-numa-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-numa-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, numa: Implement pfn -> nid mapping granularity check
  x86, mm: s/PAGES_PER_ELEMENT/PAGES_PER_SECTION/
2011-07-22 17:04:18 -07:00
Linus Torvalds 0342cbcfce Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: Fix wrong check in list_splice_init_rcu()
  net,rcu: Convert call_rcu(xt_rateest_free_rcu) to kfree_rcu()
  sysctl,rcu: Convert call_rcu(free_head) to kfree
  vmalloc,rcu: Convert call_rcu(rcu_free_vb) to kfree_rcu()
  vmalloc,rcu: Convert call_rcu(rcu_free_va) to kfree_rcu()
  ipc,rcu: Convert call_rcu(ipc_immediate_free) to kfree_rcu()
  ipc,rcu: Convert call_rcu(free_un) to kfree_rcu()
  security,rcu: Convert call_rcu(sel_netport_free) to kfree_rcu()
  security,rcu: Convert call_rcu(sel_netnode_free) to kfree_rcu()
  ia64,rcu: Convert call_rcu(sn_irq_info_free) to kfree_rcu()
  block,rcu: Convert call_rcu(disk_free_ptbl_rcu_cb) to kfree_rcu()
  scsi,rcu: Convert call_rcu(fc_rport_free_rcu) to kfree_rcu()
  audit_tree,rcu: Convert call_rcu(__put_tree) to kfree_rcu()
  security,rcu: Convert call_rcu(whitelist_item_free) to kfree_rcu()
  md,rcu: Convert call_rcu(free_conf) to kfree_rcu()
2011-07-22 16:44:08 -07:00
Linus Torvalds 8209f53d79 Merge branch 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc
* 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc: (39 commits)
  ptrace: do_wait(traced_leader_killed_by_mt_exec) can block forever
  ptrace: fix ptrace_signal() && STOP_DEQUEUED interaction
  connector: add an event for monitoring process tracers
  ptrace: dont send SIGSTOP on auto-attach if PT_SEIZED
  ptrace: mv send-SIGSTOP from do_fork() to ptrace_init_task()
  ptrace_init_task: initialize child->jobctl explicitly
  has_stopped_jobs: s/task_is_stopped/SIGNAL_STOP_STOPPED/
  ptrace: make former thread ID available via PTRACE_GETEVENTMSG after PTRACE_EVENT_EXEC stop
  ptrace: wait_consider_task: s/same_thread_group/ptrace_reparented/
  ptrace: kill real_parent_is_ptracer() in in favor of ptrace_reparented()
  ptrace: ptrace_reparented() should check same_thread_group()
  redefine thread_group_leader() as exit_signal >= 0
  do not change dead_task->exit_signal
  kill task_detached()
  reparent_leader: check EXIT_DEAD instead of task_detached()
  make do_notify_parent() __must_check, update the callers
  __ptrace_detach: avoid task_detached(), check do_notify_parent()
  kill tracehook_notify_death()
  make do_notify_parent() return bool
  ptrace: s/tracehook_tracer_task()/ptrace_parent()/
  ...
2011-07-22 15:06:50 -07:00
Linus Torvalds f99b7880cb Merge branch 'slab-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6
* 'slab-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slab: fix DEBUG_SLAB warning
  slab: shrink sizeof(struct kmem_cache)
  slab: fix DEBUG_SLAB build
  SLUB: Fix missing <linux/stacktrace.h> include
  slub: reduce overhead of slub_debug
  slub: Add method to verify memory is not freed
  slub: Enable backtrace for create/delete points
  slab allocators: Provide generic description of alignment defines
  slab, slub, slob: Unify alignment definition
  slob/lockdep: Fix gfp flags passed to lockdep
2011-07-22 12:44:30 -07:00
Tetsuo Handa 7ea466f225 slab: fix DEBUG_SLAB warning
In commit c225150b "slab: fix DEBUG_SLAB build",
"if ((unsigned long)objp & (ARCH_SLAB_MINALIGN-1))" is always true if
ARCH_SLAB_MINALIGN == 0. Do not print warning if ARCH_SLAB_MINALIGN == 0.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2011-07-22 11:01:03 +03:00
Kay Sievers f15146380d fs: seq_file - add event counter to simplify poll() support
Moving the event counter into the dynamically allocated 'struc seq_file'
allows poll() support without the need to allocate its own tracking
structure.

All current users are switched over to use the new counter.

Requested-by: Andrew Morton akpm@linux-foundation.org
Acked-by: NeilBrown <neilb@suse.de>
Tested-by: Lucas De Marchi lucas.demarchi@profusion.mobi
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 20:47:50 -04:00
Christoph Hellwig bd5fe6c5eb fs: kill i_alloc_sem
i_alloc_sem is a rather special rw_semaphore.  It's the last one that may
be released by a non-owner, and it's write side is always mirrored by
real exclusion.  It's intended use it to wait for all pending direct I/O
requests to finish before starting a truncate.

Replace it with a hand-grown construct:

 - exclusion for truncates is already guaranteed by i_mutex, so it can
   simply fall way
 - the reader side is replaced by an i_dio_count member in struct inode
   that counts the number of pending direct I/O requests.  Truncate can't
   proceed as long as it's non-zero
 - when i_dio_count reaches non-zero we wake up a pending truncate using
   wake_up_bit on a new bit in i_flags
 - new references to i_dio_count can't appear while we are waiting for
   it to read zero because the direct I/O count always needs i_mutex
   (or an equivalent like XFS's i_iolock) for starting a new operation.

This scheme is much simpler, and saves the space of a spinlock_t and a
struct list_head in struct inode (typically 160 bits on a non-debug 64-bit
system).

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 20:47:46 -04:00
Lai Jiangshan 22a3c7d188 vmalloc,rcu: Convert call_rcu(rcu_free_vb) to kfree_rcu()
The rcu callback rcu_free_vb() just calls a kfree(),
so we use kfree_rcu() instead of the call_rcu(rcu_free_vb).

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-07-20 14:10:18 -07:00
Lai Jiangshan 14769de93f vmalloc,rcu: Convert call_rcu(rcu_free_va) to kfree_rcu()
The rcu callback rcu_free_va() just calls a kfree(),
so we use kfree_rcu() instead of the call_rcu(rcu_free_va).

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-07-20 14:10:17 -07:00
Eric Dumazet b56efcf0a4 slab: shrink sizeof(struct kmem_cache)
Reduce high order allocations for some setups.
(NR_CPUS=4096 -> we need 64KB per kmem_cache struct)

We now allocate exact needed size (using nr_cpu_ids and nr_node_ids)

This also makes code a bit smaller on x86_64, since some field offsets
are less than the 127 limit :

Before patch :
# size mm/slab.o
   text    data     bss     dec     hex filename
  22605  361665      32  384302   5dd2e mm/slab.o

After patch :
# size mm/slab.o
   text    data     bss     dec     hex filename
  22349	 353473	   8224	 384046	  5dc2e	mm/slab.o

CC: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2011-07-20 20:27:56 +03:00
Dave Chinner e9299f5058 vmscan: add customisable shrinker batch size
For shrinkers that have their own cond_resched* calls, having
shrink_slab break the work down into small batches is not
paticularly efficient. Add a custom batchsize field to the struct
shrinker so that shrinkers can use a larger batch size if they
desire.

A value of zero (uninitialised) means "use the default", so
behaviour is unchanged by this patch.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 01:44:32 -04:00
Dave Chinner 3567b59aa8 vmscan: reduce wind up shrinker->nr when shrinker can't do work
When a shrinker returns -1 to shrink_slab() to indicate it cannot do
any work given the current memory reclaim requirements, it adds the
entire total_scan count to shrinker->nr. The idea ehind this is that
whenteh shrinker is next called and can do work, it will do the work
of the previously aborted shrinker call as well.

However, if a filesystem is doing lots of allocation with GFP_NOFS
set, then we get many, many more aborts from the shrinkers than we
do successful calls. The result is that shrinker->nr winds up to
it's maximum permissible value (twice the current cache size) and
then when the next shrinker call that can do work is issued, it
has enough scan count built up to free the entire cache twice over.

This manifests itself in the cache going from full to empty in a
matter of seconds, even when only a small part of the cache is
needed to be emptied to free sufficient memory.

Under metadata intensive workloads on ext4 and XFS, I'm seeing the
VFS caches increase memory consumption up to 75% of memory (no page
cache pressure) over a period of 30-60s, and then the shrinker
empties them down to zero in the space of 2-3s. This cycle repeats
over and over again, with the shrinker completely trashing the inode
and dentry caches every minute or so the workload continues.

This behaviour was made obvious by the shrink_slab tracepoints added
earlier in the series, and made worse by the patch that corrected
the concurrent accounting of shrinker->nr.

To avoid this problem, stop repeated small increments of the total
scan value from winding shrinker->nr up to a value that can cause
the entire cache to be freed. We still need to allow it to wind up,
so use the delta as the "large scan" threshold check - if the delta
is more than a quarter of the entire cache size, then it is a large
scan and allowed to cause lots of windup because we are clearly
needing to free lots of memory.

If it isn't a large scan then limit the total scan to half the size
of the cache so that windup never increases to consume the whole
cache. Reducing the total scan limit further does not allow enough
wind-up to maintain the current levels of performance, whilst a
higher threshold does not prevent the windup from freeing the entire
cache under sustained workloads.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 01:44:31 -04:00
Dave Chinner acf92b485c vmscan: shrinker->nr updates race and go wrong
shrink_slab() allows shrinkers to be called in parallel so the
struct shrinker can be updated concurrently. It does not provide any
exclusio for such updates, so we can get the shrinker->nr value
increasing or decreasing incorrectly.

As a result, when a shrinker repeatedly returns a value of -1 (e.g.
a VFS shrinker called w/ GFP_NOFS), the shrinker->nr goes haywire,
sometimes updating with the scan count that wasn't used, sometimes
losing it altogether. Worse is when a shrinker does work and that
update is lost due to racy updates, which means the shrinker will do
the work again!

Fix this by making the total_scan calculations independent of
shrinker->nr, and making the shrinker->nr updates atomic w.r.t. to
other updates via cmpxchg loops.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 01:44:29 -04:00
Dave Chinner 095760730c vmscan: add shrink_slab tracepoints
It is impossible to understand what the shrinkers are actually doing
without instrumenting the code, so add a some tracepoints to allow
insight to be gained.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 01:44:27 -04:00
Shaohua Li 4746efded8 vmscan: fix a livelock in kswapd
I'm running a workload which triggers a lot of swap in a machine with 4
nodes.  After I kill the workload, I found a kswapd livelock.  Sometimes
kswapd3 or kswapd2 are keeping running and I can't access filesystem,
but most memory is free.

This looks like a regression since commit 08951e5459 ("mm: vmscan:
correct check for kswapd sleeping in sleeping_prematurely").

Node 2 and 3 have only ZONE_NORMAL, but balance_pgdat() will return 0
for classzone_idx.  The reason is end_zone in balance_pgdat() is 0 by
default, if all zones have watermark ok, end_zone will keep 0.

Later sleeping_prematurely() always returns true.  Because this is an
order 3 wakeup, and if classzone_idx is 0, both balanced_pages and
present_pages in pgdat_balanced() are 0.  We add a special case here.
If a zone has no page, we think it's balanced.  This fixes the livelock.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-19 22:09:31 -07:00
Hugh Dickins c225150b86 slab: fix DEBUG_SLAB build
Fix CONFIG_SLAB=y CONFIG_DEBUG_SLAB=y build error and warnings.

Now that ARCH_SLAB_MINALIGN defaults to __alignof__(unsigned long long),
it is always defined (when slab.h included), but cannot be used in #if:
mm/slab.c: In function `cache_alloc_debugcheck_after':
mm/slab.c:3156:5: warning: "__alignof__" is not defined
mm/slab.c:3156:5: error: missing binary operator before token "("
make[1]: *** [mm/slab.o] Error 1

So just remove the #if and #endif lines, but then 64-bit build warns:
mm/slab.c: In function `cache_alloc_debugcheck_after':
mm/slab.c:3156:6: warning: cast from pointer to integer of different size
mm/slab.c:3158:10: warning: format `%d' expects type `int', but argument
                            3 has type `long unsigned int'
Fix those with casts, whatever the actual type of ARCH_SLAB_MINALIGN.

Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2011-07-18 15:20:49 +03:00
Tejun Heo 1e01979c8f x86, numa: Implement pfn -> nid mapping granularity check
SPARSEMEM w/o VMEMMAP and DISCONTIGMEM, both used only on 32bit, use
sections array to map pfn to nid which is limited in granularity.  If
NUMA nodes are laid out such that the mapping cannot be accurate, boot
will fail triggering BUG_ON() in mminit_verify_page_links().

On 32bit, it's 512MiB w/ PAE and SPARSEMEM.  This seems to have been
granular enough until commit 2706a0bf7b (x86, NUMA: Enable
CONFIG_AMD_NUMA on 32bit too).  Apparently, there is a machine which
aligns NUMA nodes to 128MiB and has only AMD NUMA but not SRAT.  This
led to the following BUG_ON().

 On node 0 totalpages: 2096615
   DMA zone: 32 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 3927 pages, LIFO batch:0
   Normal zone: 1740 pages used for memmap
   Normal zone: 220978 pages, LIFO batch:31
   HighMem zone: 16405 pages used for memmap
   HighMem zone: 1853533 pages, LIFO batch:31
 BUG: Int 6: CR2   (null)
      EDI   (null)  ESI 00000002  EBP 00000002  ESP c1543ecc
      EBX f2400000  EDX 00000006  ECX   (null)  EAX 00000001
      err   (null)  EIP c16209aa   CS 00000060  flg 00010002
 Stack: f2400000 00220000 f7200800 c1620613 00220000 01000000 04400000 00238000
          (null) f7200000 00000002 f7200b58 f7200800 c1620929 000375fe   (null)
        f7200b80 c16395f0 00200a02 f7200a80   (null) 000375fe 00000002   (null)
 Pid: 0, comm: swapper Not tainted 2.6.39-rc5-00181-g2706a0b #17
 Call Trace:
  [<c136b1e5>] ? early_fault+0x2e/0x2e
  [<c16209aa>] ? mminit_verify_page_links+0x12/0x42
  [<c1620613>] ? memmap_init_zone+0xaf/0x10c
  [<c1620929>] ? free_area_init_node+0x2b9/0x2e3
  [<c1607e99>] ? free_area_init_nodes+0x3f2/0x451
  [<c1601d80>] ? paging_init+0x112/0x118
  [<c15f578d>] ? setup_arch+0x791/0x82f
  [<c15f43d9>] ? start_kernel+0x6a/0x257

This patch implements node_map_pfn_alignment() which determines
maximum internode alignment and update numa_register_memblks() to
reject NUMA configuration if alignment exceeds the pfn -> nid mapping
granularity of the memory model as determined by PAGES_PER_SECTION.

This makes the problematic machine boot w/ flatmem by rejecting the
NUMA config and provides protection against crazy NUMA configurations.

Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20110712074534.GB2872@htj.dyndns.org
LKML-Reference: <20110628174613.GP478@escobedo.osrc.amd.com>
Reported-and-Tested-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
Cc: Conny Seidel <conny.seidel@amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-12 21:58:29 -07:00
Bob Liu 8f3b1327aa mm/nommu.c: fix remap_pfn_range()
remap_pfn_range() means map physical address pfn<<PAGE_SHIFT to user addr.

For nommu arch it's implemented by vma->vm_start = pfn << PAGE_SHIFT which
is wrong acroding the original meaning of this function.  And some driver
developer using remap_pfn_range() with correct parameter will get
unexpected result because vm_start is changed.  It should be implementd
like addr = pfn << PAGE_SHIFT but which is meanless on nommu arch, this
patch just make it simply return.

Parameter name and setting of vma->vm_flags also be fixed.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Bob Liu <lliubbo@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-08 21:14:44 -07:00
KAMEZAWA Hiroyuki 453a9bf347 memcg: fix numa scan information update to be triggered by memory event
commit 889976dbcb ("memcg: reclaim memory from nodes in round-robin
order") adds an numa node round-robin for memcg.  But the information is
updated once per 10sec.

This patch changes the update trigger from jiffies to memcg's event count.
 After this patch, numa scan information will be updated when we see 1024
events of pagein/pageout under a memcg.

[akpm@linux-foundation.org: attempt to repair code layout]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Ying Han <yinghan@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-08 21:14:44 -07:00
KAMEZAWA Hiroyuki 4d0c066d29 memcg: fix reclaimable lru check in memcg
Now, in mem_cgroup_hierarchical_reclaim(), mem_cgroup_local_usage() is
used for checking whether the memcg contains reclaimable pages or not.  If
no pages in it, the routine skips it.

But, mem_cgroup_local_usage() contains Unevictable pages and cannot handle
"noswap" condition correctly.  This doesn't work on a swapless system.

This patch adds test_mem_cgroup_reclaimable() and replaces
mem_cgroup_local_usage().  test_mem_cgroup_reclaimable() see LRU counter
and returns correct answer to the caller.  And this new function has
"noswap" argument and can see only FILE LRU if necessary.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix kerneldoc layout]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Ying Han <yinghan@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-08 21:14:43 -07:00
Shaohua Li 0b43c3aab0 mm: __tlb_remove_page() check the correct batch
__tlb_remove_page() switches to a new batch page, but still checks space
in the old batch.  This check always fails, and causes a forced tlb flush.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-08 21:14:43 -07:00
Mel Gorman 215ddd6664 mm: vmscan: only read new_classzone_idx from pgdat when reclaiming successfully
During allocator-intensive workloads, kswapd will be woken frequently
causing free memory to oscillate between the high and min watermark.  This
is expected behaviour.  Unfortunately, if the highest zone is small, a
problem occurs.

When balance_pgdat() returns, it may be at a lower classzone_idx than it
started because the highest zone was unreclaimable.  Before checking if it
should go to sleep though, it checks pgdat->classzone_idx which when there
is no other activity will be MAX_NR_ZONES-1.  It interprets this as it has
been woken up while reclaiming, skips scheduling and reclaims again.  As
there is no useful reclaim work to do, it enters into a loop of shrinking
slab consuming loads of CPU until the highest zone becomes reclaimable for
a long period of time.

There are two problems here.  1) If the returned classzone or order is
lower, it'll continue reclaiming without scheduling.  2) if the highest
zone was marked unreclaimable but balance_pgdat() returns immediately at
DEF_PRIORITY, the new lower classzone is not communicated back to kswapd()
for sleeping.

This patch does two things that are related.  If the end_zone is
unreclaimable, this information is communicated back.  Second, if the
classzone or order was reduced due to failing to reclaim, new information
is not read from pgdat and instead an attempt is made to go to sleep.  Due
to this, it is also necessary that pgdat->classzone_idx be initialised
each time to pgdat->nr_zones - 1 to avoid re-reads being interpreted as
wakeups.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reported-by: Pádraig Brady <P@draigBrady.com>
Tested-by: Pádraig Brady <P@draigBrady.com>
Tested-by: Andrew Lutomirski <luto@mit.edu>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-08 21:14:43 -07:00
Mel Gorman da175d06b4 mm: vmscan: evaluate the watermarks against the correct classzone
When deciding if kswapd is sleeping prematurely, the classzone is taken
into account but this is different to what balance_pgdat() and the
allocator are doing.  Specifically, the DMA zone will be checked based on
the classzone used when waking kswapd which could be for a GFP_KERNEL or
GFP_HIGHMEM request.  The lowmem reserve limit kicks in, the watermark is
not met and kswapd thinks it's sleeping prematurely keeping kswapd awake in
error.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reported-by: Pádraig Brady <P@draigBrady.com>
Tested-by: Pádraig Brady <P@draigBrady.com>
Tested-by: Andrew Lutomirski <luto@mit.edu>
Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-08 21:14:43 -07:00
Mel Gorman d7868dae89 mm: vmscan: do not apply pressure to slab if we are not applying pressure to zone
During allocator-intensive workloads, kswapd will be woken frequently
causing free memory to oscillate between the high and min watermark.  This
is expected behaviour.

When kswapd applies pressure to zones during node balancing, it checks if
the zone is above a high+balance_gap threshold.  If it is, it does not
apply pressure but it unconditionally shrinks slab on a global basis which
is excessive.  In the event kswapd is being kept awake due to a high small
unreclaimable zone, it skips zone shrinking but still calls shrink_slab().

Once pressure has been applied, the check for zone being unreclaimable is
being made before the check is made if all_unreclaimable should be set.
This miss of unreclaimable can cause has_under_min_watermark_zone to be
set due to an unreclaimable zone preventing kswapd backing off on
congestion_wait().

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reported-by: Pádraig Brady <P@draigBrady.com>
Tested-by: Pádraig Brady <P@draigBrady.com>
Tested-by: Andrew Lutomirski <luto@mit.edu>
Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-08 21:14:43 -07:00
Mel Gorman 08951e5459 mm: vmscan: correct check for kswapd sleeping in sleeping_prematurely
During allocator-intensive workloads, kswapd will be woken frequently
causing free memory to oscillate between the high and min watermark.  This
is expected behaviour.  Unfortunately, if the highest zone is small, a
problem occurs.

This seems to happen most with recent sandybridge laptops but it's
probably a co-incidence as some of these laptops just happen to have a
small Normal zone.  The reproduction case is almost always during copying
large files that kswapd pegs at 100% CPU until the file is deleted or
cache is dropped.

The problem is mostly down to sleeping_prematurely() keeping kswapd awake
when the highest zone is small and unreclaimable and compounded by the
fact we shrink slabs even when not shrinking zones causing a lot of time
to be spent in shrinkers and a lot of memory to be reclaimed.

Patch 1 corrects sleeping_prematurely to check the zones matching
	the classzone_idx instead of all zones.

Patch 2 avoids shrinking slab when we are not shrinking a zone.

Patch 3 notes that sleeping_prematurely is checking lower zones against
	a high classzone which is not what allocators or balance_pgdat()
	is doing leading to an artifical belief that kswapd should be
	still awake.

Patch 4 notes that when balance_pgdat() gives up on a high zone that the
	decision is not communicated to sleeping_prematurely()

This problem affects 2.6.38.8 for certain and is expected to affect 2.6.39
and 3.0-rc4 as well.  If accepted, they need to go to -stable to be picked
up by distros and this series is against 3.0-rc4.  I've cc'd people that
reported similar problems recently to see if they still suffer from the
problem and if this fixes it.

This patch: correct the check for kswapd sleeping in sleeping_prematurely()

During allocator-intensive workloads, kswapd will be woken frequently
causing free memory to oscillate between the high and min watermark.  This
is expected behaviour.

A problem occurs if the highest zone is small.  balance_pgdat() only
considers unreclaimable zones when priority is DEF_PRIORITY but
sleeping_prematurely considers all zones.  It's possible for this sequence
to occur

  1. kswapd wakes up and enters balance_pgdat()
  2. At DEF_PRIORITY, marks highest zone unreclaimable
  3. At DEF_PRIORITY-1, ignores highest zone setting end_zone
  4. At DEF_PRIORITY-1, calls shrink_slab freeing memory from
        highest zone, clearing all_unreclaimable. Highest zone
        is still unbalanced
  5. kswapd returns and calls sleeping_prematurely
  6. sleeping_prematurely looks at *all* zones, not just the ones
     being considered by balance_pgdat. The highest small zone
     has all_unreclaimable cleared but the zone is not
     balanced. all_zones_ok is false so kswapd stays awake

This patch corrects the behaviour of sleeping_prematurely to check the
zones balance_pgdat() checked.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reported-by: Pádraig Brady <P@draigBrady.com>
Tested-by: Pádraig Brady <P@draigBrady.com>
Tested-by: Andrew Lutomirski <luto@mit.edu>
Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-08 21:14:42 -07:00
Pekka Enberg bfa71457a0 SLUB: Fix missing <linux/stacktrace.h> include
This fixes the following build breakage commit d6543e3 ("slub: Enable backtrace
for create/delete points"):

  CC      mm/slub.o
mm/slub.c: In function ‘set_track’:
mm/slub.c:428: error: storage size of ‘trace’ isn’t known
mm/slub.c:435: error: implicit declaration of function ‘save_stack_trace’
mm/slub.c:428: warning: unused variable ‘trace’
make[1]: *** [mm/slub.o] Error 1
make: *** [mm/slub.o] Error 2

Signed-off-by: Pekka Enberg <penberg@kernel.org>
2011-07-07 22:47:01 +03:00
Marcin Slusarz c4089f98e9 slub: reduce overhead of slub_debug
slub checks for poison one byte by one, which is highly inefficient
and shows up frequently as a highest cpu-eater in perf top.

Joining reads gives nice speedup:

(Compiling some project with different options)
                                 make -j12    make clean
slub_debug disabled:             1m 27s       1.2 s
slub_debug enabled:              1m 46s       7.6 s
slub_debug enabled + this patch: 1m 33s       3.2 s

check_bytes still shows up high, but not always at the top.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: linux-mm@kvack.org
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2011-07-07 22:44:45 +03:00
Ben Greear d18a90dd85 slub: Add method to verify memory is not freed
This is for tracking down suspect memory usage.

Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2011-07-07 22:17:08 +03:00
Ben Greear d6543e3935 slub: Enable backtrace for create/delete points
This patch attempts to grab a backtrace for the creation
and deletion points of the slub object.  When a fault is
detected, we can then get a better idea of where the item
was deleted.

Example output from debugging some funky nfs/rpc behaviour:

=============================================================================
BUG kmalloc-64: Object is on free-list
-----------------------------------------------------------------------------

INFO: Allocated in rpcb_getport_async+0x39c/0x5a5 [sunrpc] age=381 cpu=3 pid=3750
       __slab_alloc+0x348/0x3ba
       kmem_cache_alloc_trace+0x67/0xe7
       rpcb_getport_async+0x39c/0x5a5 [sunrpc]
       call_bind+0x70/0x75 [sunrpc]
       __rpc_execute+0x78/0x24b [sunrpc]
       rpc_execute+0x3d/0x42 [sunrpc]
       rpc_run_task+0x79/0x81 [sunrpc]
       rpc_call_sync+0x3f/0x60 [sunrpc]
       rpc_ping+0x42/0x58 [sunrpc]
       rpc_create+0x4aa/0x527 [sunrpc]
       nfs_create_rpc_client+0xb1/0xf6 [nfs]
       nfs_init_client+0x3b/0x7d [nfs]
       nfs_get_client+0x453/0x5ab [nfs]
       nfs_create_server+0x10b/0x437 [nfs]
       nfs_fs_mount+0x4ca/0x708 [nfs]
       mount_fs+0x6b/0x152
INFO: Freed in rpcb_map_release+0x3f/0x44 [sunrpc] age=30 cpu=2 pid=29049
       __slab_free+0x57/0x150
       kfree+0x107/0x13a
       rpcb_map_release+0x3f/0x44 [sunrpc]
       rpc_release_calldata+0x12/0x14 [sunrpc]
       rpc_free_task+0x59/0x61 [sunrpc]
       rpc_final_put_task+0x82/0x8a [sunrpc]
       __rpc_execute+0x23c/0x24b [sunrpc]
       rpc_async_schedule+0x10/0x12 [sunrpc]
       process_one_work+0x230/0x41d
       worker_thread+0x133/0x217
       kthread+0x7d/0x85
       kernel_thread_helper+0x4/0x10
INFO: Slab 0xffffea00029aa470 objects=20 used=9 fp=0xffff8800be7830d8 flags=0x20000000004081
INFO: Object 0xffff8800be7830d8 @offset=4312 fp=0xffff8800be7827a8

Bytes b4 0xffff8800be7830c8:  87 a8 96 00 01 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a .�......ZZZZZZZZ
 Object 0xffff8800be7830d8:  6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
 Object 0xffff8800be7830e8:  6b 6b 6b 6b 01 08 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkk..kkkkkkkkkk
 Object 0xffff8800be7830f8:  6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
 Object 0xffff8800be783108:  6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk�
 Redzone 0xffff8800be783118:  bb bb bb bb bb bb bb bb                         �������������
 Padding 0xffff8800be783258:  5a 5a 5a 5a 5a 5a 5a 5a                         ZZZZZZZZ
Pid: 29049, comm: kworker/2:2 Not tainted 3.0.0-rc4+ #8
Call Trace:
 [<ffffffff811055c3>] print_trailer+0x131/0x13a
 [<ffffffff81105601>] object_err+0x35/0x3e
 [<ffffffff8110746f>] verify_mem_not_deleted+0x7a/0xb7
 [<ffffffffa02851b5>] rpcb_getport_done+0x23/0x126 [sunrpc]
 [<ffffffffa027d0ba>] rpc_exit_task+0x3f/0x6d [sunrpc]
 [<ffffffffa027d4ab>] __rpc_execute+0x78/0x24b [sunrpc]
 [<ffffffffa027d6c0>] ? rpc_execute+0x42/0x42 [sunrpc]
 [<ffffffffa027d6d0>] rpc_async_schedule+0x10/0x12 [sunrpc]
 [<ffffffff810611b7>] process_one_work+0x230/0x41d
 [<ffffffff81061102>] ? process_one_work+0x17b/0x41d
 [<ffffffff81063613>] worker_thread+0x133/0x217
 [<ffffffff810634e0>] ? manage_workers+0x191/0x191
 [<ffffffff81066e10>] kthread+0x7d/0x85
 [<ffffffff81485924>] kernel_thread_helper+0x4/0x10
 [<ffffffff8147eb18>] ? retint_restore_args+0x13/0x13
 [<ffffffff81066d93>] ? __init_kthread_worker+0x56/0x56
 [<ffffffff81485920>] ? gs_change+0x13/0x13

Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2011-07-07 22:17:03 +03:00