Commit Graph

6 Commits

Author SHA1 Message Date
John Garry 705c0ee8d4 bus: hisi_lpc: Don't fail probe for unrecognised child devices
Currently for ACPI-based FW we fail the probe for an unrecognised child
HID.

However, there is FW in the field with LPC child devices having fake HIDs,
namely "IPI0002", which was an IPMI device invented to support the
initial out-of-tree LPC host driver, different from the final mainline
version.

To provide compatibility support for these dodgy FWs, just discard the
unrecognised HIDs instead of failing the probe altogether.

Tested-by: Zengruan Ye <yezengruan@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-02-08 09:18:53 +00:00
John Garry adf3457b4c HISI LPC: Add ACPI UART support
On the Huawei D03 development board the system UART is
the UART connected on the LPC bus.

The profile for the device driver required for this HW
is as follows:
 - platform driver
 - 16550
 - ACPI support
 - polling mode support
 - IO space support

In principle we should use the PNP driver (8250_dw.c) for
8250-devices with ACPI FW. However since this driver does
not support PNP devices, and modifying the PNP core code
to support it is not worth the effort, use the generic
8250 isa driver.

For this, we setup the pdev platform data for the serial
8250 port.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-10 17:45:52 +01:00
John Garry 99c0228d6f HISI LPC: Re-Add ACPI child enumeration support
Since we no longer use the MFD APIs to enumerate the
child devices on the bus, use the platform driver APIs
directly.

In this patch we iterate of the children devices for the
host, and create a platform device directly per child.

For the iterating, we match the child ACPI HID against a
known list of supported child devices and their respective
ACPIs HID, to find the device name and any other
supplementary data.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-10 17:35:46 +01:00
John Garry 332f632ec3 HISI LPC: Stop using MFD APIs
The MFD APIs should only be used by drivers in
drivers/mfd. It is not worth splitting the driver to have
separate parts in drivers/bus and drivers/mfd, so just
drop MFD API usage.

As a solution, we will use the platform device APIs directly
to achieve the same as we had when using MFD APIs.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-10 17:30:06 +01:00
John Garry e0aa1563f8 HISI LPC: Add ACPI support
Based on the previous patches, this patch supports the LPC host on
Hip06/Hip07 for ACPI FW.

It is the responsibility of the LPC host driver to enumerate the child
devices, as the ACPI scan code will not enumerate children of "indirect IO"
hosts.

The ACPI table for the LPC host controller and the child devices is in the
following format:

  Device (LPC0) {
    Name (_HID, "HISI0191")  // HiSi LPC
    Name (_CRS, ResourceTemplate () {
      Memory32Fixed (ReadWrite, 0xa01b0000, 0x1000)
    })
  }

  Device (LPC0.IPMI) {
    Name (_HID, "IPI0001")
    Name (LORS, ResourceTemplate() {
      QWordIO (
        ResourceConsumer,
        MinNotFixed,     // _MIF
        MaxNotFixed,     // _MAF
        PosDecode,
        EntireRange,
        0x0,             // _GRA
        0xe4,            // _MIN
        0x3fff,          // _MAX
        0x0,             // _TRA
        0x04,            // _LEN
        , ,
        BTIO
      )
    })

Since the IO resources of the child devices need to be translated from LPC
bus addresses to logical PIO addresses, and we shouldn't modify the
resources of the devices generated in the FW scan, a per-child MFD is
created as a substitute.  The MFD IO resources will be the translated bus
addresses of the ACPI child.

Tested-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Zhichang Yuan <yuanzhichang@hisilicon.com>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-04-04 08:42:51 -05:00
Zhichang Yuan adf38bb0b5 HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings
The low-pin-count (LPC) interface of Hip06/Hip07 accesses I/O port space of
peripherals.

Implement the LPC host controller driver which performs the I/O operations
on the underlying hardware.  We don't want to touch existing drivers such
as ipmi-bt, so this driver applies the indirect-IO introduced in the
previous patch after registering an indirect-IO node to the indirect-IO
devices list which will be searched by the I/O accessors to retrieve the
host-local I/O port.

The driver config is set as a bool instead of a tristate.  The reason here
is that, by the very nature of the driver providing a logical PIO range, it
does not make sense to have this driver as a loadable module.  Another more
specific reason is that the Huawei D03 board which includes Hip06 SoC
requires the LPC bus for UART console, so should be built in.

Tested-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Zou Rongrong <zourongrong@huawei.com>
Signed-off-by: Zhichang Yuan <yuanzhichang@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>	# dts part
2018-04-04 08:42:48 -05:00