Commit Graph

20 Commits

Author SHA1 Message Date
Simon Horman 342896a5c5 clocksource: sh_mtu2: Set initcall level to subsys
The reason for this is to ensure that MTU2 is probed earlier
than with its previous initcall level, module init.

This came up as a problem with using CMT as a clock source kzm9g-reference
which does not make use of early timers or devices. In that scenario
initialisation of SDHI and MMCIF both stall on msleep() calls due to the
absence of a initialised clock source.

The purpose of this change is to keep the MTU2 code in sync with the CMT code
which has been modified in a similar manner..

Compile tested only using se7206_defconfig.
I do not believe I have any boards that support the MTU2.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-13 02:24:37 +09:00
Greg Kroah-Hartman 1850514b3e Drivers: clocksource: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:15 -08:00
Rafael J. Wysocki 3cb6f10a4d sh: MTU2: Basic runtime PM support
Modify the SH MTU2 clock event device driver to support runtime PM at
a basic level (i.e. device clocks can be disabled and enabled, but
domain power must be on, because the device has to be marked as
"irq safe").

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@opensource.se>
2012-09-04 01:36:05 +02:00
Rafael J. Wysocki dbf374142d PM / Domains: Move syscore flag from subsys data to struct device
The syscore device PM flag is used to mark the devices (belonging to
a PM domain) that should never be turned off, except for the system
core (syscore) suspend/hibernation and resume stages.  That flag is
stored in the device's struct pm_subsys_data object whose address is
available from struct device.  However, in some situations it may be
convenient to set that flag before the device is added to a PM
domain, so it is better to move it directly to the "power" member of
struct device.  Then, it can be checked by the routines in
drivers/base/power/runtime.c and drivers/base/power/main.c, which is
more straightforward.

This also reduces the number of dev_gpd_data() invocations in the
generic PM domains framework, so the overhead related to the syscore
flag is slightly smaller.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@opensource.se>
2012-09-04 01:36:04 +02:00
Rafael J. Wysocki 6fb28badf2 PM / Domains: Rename the always_on device flag to syscore
The always_on device flag is used to mark the devices (belonging to
a PM domain) that should never be turned off, except for the system
core (syscore) suspend/hibernation and resume stages.  Change name
of that flag to "syscore" to better reflect its purpose.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@opensource.se>
2012-09-04 01:36:03 +02:00
Rafael J. Wysocki cc7ad4564b sh: MTU2: Introduce clock events suspend/resume routines
Introduce suspend/resume routines for SH MTU2 clock event devices
such that if those devices belong to a PM domain, the generic PM
domains framework will be notified that the given domain may be
turned off (during system suspend) or that it has to be turned on
(during system resume).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@opensource.se>
2012-09-04 01:36:02 +02:00
Paul Mundt 50393a92c8 clocksource: sh_mtu2: Convert timer lock to raw spinlock.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-06-11 16:01:42 +09:00
Rafael J. Wysocki 57d13370cf PM / shmobile: Make MTU2 driver use pm_genpd_dev_always_on()
Make the MTU2 clocksource driver mark its device as "always on"
using pm_genpd_dev_always_on() to protect it from surprise power
removals.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: stable@vger.kernel.org
2012-03-16 21:45:26 +01:00
Paul Gortmaker 7deeab5dc4 drivers/clocksource: Add module.h to those who were using it implicitly
A pending cleanup will mean that module.h won't be implicitly
everywhere anymore.  Make sure the modular drivers in clocksource
are actually calling out for <module.h> explicitly in advance.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:42 -04:00
Magnus Damm 03ff858c09 ARM: shmobile: remove sh_timer_config clk member
Now when the SH-Mobile ARM platforms have been converted
to use device name it is possible to remove "clk" from
struct sh_timer_config.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-31 10:40:39 -04:00
Paul Mundt e19553427c Merge branch 'sh/stable-updates'
Conflicts:
	arch/sh/kernel/dwarf.c
	drivers/dma/shdma.c

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-26 16:08:27 +09:00
Paul Mundt fecf066c2d sh: Disable IRQ balancing for timer and IPI IRQs.
Make sure that the timer IRQs and IPIs aren't enabled for IRQ balancing.
IPIs are disabled as a result of being percpu while the timers simply
disable balancing outright.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-15 11:59:28 +09:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Paul Mundt c2a25e8197 clocksource: Deprecate clock string across the SH drivers.
We want to get rid of the clock string from platform data entirely,
depending on the clkdev-based clock lookup to do the right thing for us
instead.

This converts all of the SH drivers to request their associated function
clocks directly, and if there is no match for that then we fall back on
the legacy lookup while warning about it. After all of the outstanding
CPUs have been converted to clkdev lookups the clock string will be
killed off completely.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-29 16:55:43 +09:00
Paul Mundt 214a607a4f clocksource: Use dev_name() universally across the SH drivers.
There is no need to copy in the name from the sh timer config now that
dev_name() is available early. We prefer the dev_name() variant for
consistent naming.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-10 16:26:25 +09:00
Paul Mundt da64c2a8de clocksource: Fix up a registration/IRQ race in the sh drivers.
All of the SH clocksource drivers follow the scheme that the IRQ is setup
prior to registering the clockevent. The interrupt handler in the
clockevent cases looks to the event handler function pointer being filled
in by the registration code, permitting us to get in to situations where
asserted IRQs step in to the handler before registration has had a chance
to complete and hitting a NULL pointer deref.

In practice this is not an issue for most platforms, but some of them
with fairly special loaders (or that are chain-loading from another
kernel) may enter in to this situation. This fixes up the oops reported
by Rafael on hp6xx.

Reported-and-tested-by: Rafael Ignacio Zurita <rafaelignacio.zurita@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-25 16:37:46 +09:00
Paul Mundt e7fad451f0 clocksource: Drop unused irqaction.mask from SH drivers.
The irqaction.mask is legacy code that is wholly unused and going away,
so simply drop its use in the SH drivers completely.

Fixes up build failures in -next.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14 21:18:24 +09:00
Paul Mundt d1fcc0a8db clocksource: sh_mtu2/cmt_register() should be static.
Neither of these need to be exported, so just make them static.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-03 18:05:42 +09:00
Paul Mundt 46a12f7426 sh: Consolidate MTU2/CMT/TMU timer platform data.
All of the SH timers use a roughly identical structure for platform data,
which presently is broken out for each block. Consolidate all of these
definitions, as there is no reason for them to be broken out in the first
place.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-03 17:57:17 +09:00
Magnus Damm d5ed4c2e5c clocksource: SuperH MTU2 Timer driver
This patch adds a MTU2 driver for the SuperH architecture.

The MTU2 driver is a platform driver with early platform
support to allow using a MTU2 channel as only clockevent
during system bootup.

Clocksource on sh2a is currently unsupported due to code
generation issues with 64-bit math, so at this point only
periodic clockevent support is in place.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-03 17:36:02 +09:00