Commit Graph

10 Commits

Author SHA1 Message Date
Wei WANG 84d72f9cc2 mfd: mmc: rtsx: Change default tx phase
The default phase can meet most cards' requirement, but it is not the
optimal one. In some extreme situation, the rx phase point produced by
the following tuning process will drift quite a distance.
Before tuning UHS card, this patch will set a more proper initial tx
phase point, which is calculated from statistic data, and can achieve
a much better tx signal quality.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-30 14:24:07 +02:00
Wei WANG 09fd86780b mfd: rtsx: Copyright modifications
Update copyright date, remove author address and add Roger Tseng.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-20 10:22:01 +02:00
Wei WANG eb891c65c9 mfd: rtsx: Configure to enter a deeper power-saving mode in S3
Set a bit to enable rts5227 and rts5249 to enter a deeper internal
power-saving mode in S3, and recover it after resuming.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-20 10:22:01 +02:00
Wei WANG 7140812c4a mfd: rtsx: Move some actions from rtsx_pci_init_hw to individual extra_init_hw
These actions are individual for each reader model, so should be put in
extra_init_hw instead of rtsx_pci_init_hw.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-20 10:22:00 +02:00
Wei WANG 5947c167d1 mfd: rtsx: Add shutdown callback in rtsx_pci_driver
Some actions to clear power state should be handled in .shutdown
callback in rtsx_pci_driver. This patch adopts the following measures to
catch this goal:
1. Add a function rtsx_pci_power_off to abstract the common ops in
.shutdown and .suspend
2. Add pcr->ops->force_power_down to fulfill the individual action for
each reader model

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-20 10:22:00 +02:00
Wei WANG 773ccdfd9c mfd: rtsx: Read vendor setting from config space
Normally OEMs will set vendor setting to the config space of Realtek
card reader in BIOS stage. This patch reads the setting at the first,
and configure the internal registers according to it, to improve card
reader's compatibility condition.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-20 10:22:00 +02:00
Roger Tseng 88a7ee37f3 mfd: rtsx: Implement driving adjustment to device-dependent callbacks
Implement different ways of selecting driving capability(a necessary adjustment
along with voltage change). It was origionally in device-independent
mmc/host/rtsx_pci_sdmmc.c. Moving it here to support devices which may have a
different way of adjustment.

Signed-off-by: Roger Tseng <rogerable@realtek.com>
Reviewed-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14 00:22:59 +01:00
Wei WANG ab4e8f8b7b mfd: rtsx: Add clock divider hook
Add callback function conv_clk_and_div_n to convert between SSC clock
and its divider N.
For rtl8411, the formula to calculate SSC clock divider N is different
with the other card reader models.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-27 01:30:20 +01:00
Wei WANG d817ac4e18 mfd: rtsx: Add output voltage switch hook
Different card reader has different method to switch output voltage,
add this callback to let the card reader implement its individual switch
function.
This is needed as rtl8411 has a specific switch output voltage procedure.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-27 01:29:39 +01:00
Wei WANG 67d16a4686 drivers/mfd: Add realtek pcie card reader driver
Realtek PCI-E card reader driver adapts requests from upper-level
sdmmc/memstick layer to the real physical card reader.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15 17:30:14 -08:00