Commit Graph

366 Commits

Author SHA1 Message Date
John Holland c55bf102b6 [ARM] Kirkwood: enable eSATA on QNAP TS-219P
Initialize PCI/PCIe on the QNAP TS-119, TS-219 and TS-219P hardware
allowing the use of the discrete eSATA controller connected to the PCIe
bus in the TS-219P.

Signed-off-by: John Holland <john.holland@cellent-fs.de>
Tested-by: Thomas Reitmayr <treitmayr@devbase.at>
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-08-24 11:56:00 -04:00
Russell King 7063c88c72 Merge branch 'omap-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2009-08-10 14:23:29 +01:00
Roger Quadros 4177662ec9 OMAP3: RX51: Updated rx51_defconfig
Added REGULATOR, MMC and updated default CMDLINE so RX51 now boots.

Note that the regulator code should be moved from mmc-twl4030.c
to omap_hsmmc.c so it can be a module.

Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-10 14:49:52 +03:00
Gupta, Ajay Kumar e8e2ff462d USB: musb: fix the nop registration for OMAP3EVM
OMAP3EVM uses ISP1504 phy which doesn't require any programming and
thus has to use NOP otg transceiver.

Cleanups being done:
	- Remove unwanted code in usb-musb.c file
	- Register NOP in OMAP3EVM board file using
	  usb_nop_xceiv_register().
	- Select NOP_USB_XCEIV for OMAP3EVM boards.
	- Don't enable TWL4030_USB in omap3_evm_defconfig

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Eino-Ville Talvala <talvala@stanford.edu>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-07 16:05:13 -07:00
Sascha Hauer 42469ff014 mx3 defconfig update
- enable PCM043, MX31LILLY, ARMADILLO5X0 and MX35_3DS boards
- enable MXC nand driver
- enable UBI support
- disable cs89x0 support which broke all boards which do not have this chip

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-28 14:24:28 +02:00
Sascha Hauer 8666f8deec mx27 defconfig update
- enable MX27_3DS and MX27LITE Board
- enable MXC nand driver
- enable UBI support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-28 14:22:42 +02:00
Linus Walleij d740d347f8 [ARM] 5608/1: Updated U300 defconfig
Removed the LBD support that isn't of any use right now at least,
then remove remnants of the TCM config flags that somehow crept
in by mistake (not yet merged patch for 2.6.32) and then the usual
defconfig noise from updated menus.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-17 13:38:56 +01:00
Matthias Kaehlcke 66d9e2102a [ARM] 5576/1: Update kb9202_defconfig
The default configuration file for the KwikByte kb9202 board was based on a 2.6.13-rc2 kernel and doesn't produce a bootable kernel. Update the
configuration in order to produce a bootable image.

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-02 21:23:05 +01:00
Linus Walleij 9be4b17c4c [ARM] 5579/1: Updated U300 defconfig
This defconfig update selects all the new U300 drivers merged for
2.6.31-rc1 in the merge window and add defaults for the new
config options. It compiles and boots nicely from initramfs on
the U300.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-02 17:24:39 +01:00
Ben Dooks 622a8f5f7b [ARM] s3c2410_defconfig: add MINI2440 machine to build
Add the MINI2440 to the list of machines built by the
central defconfig.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-23 18:20:10 +01:00
Ben Dooks a18327f35a [ARM] S3C: Remove unused CONFIG_DEBUG_S3C_PORT
Remove the unused CONFIG_DEBUG_S3C_PORT as we currently only have
support for using the S3C UARTs via the low-level debug code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-23 12:24:07 +01:00
Michel Pollet bf4a59f152 [ARM] MINI2440: Create a mini2440_defconfig file
Just a working, starting point config file for the board.

Signed-off-by: Michel Pollet <buserror@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-15 22:10:24 +01:00
Russell King b7c11ec9f1 Merge branch 'u300' into devel
Conflicts:
	arch/arm/Makefile
Updates:
	arch/arm/mach-u300/core.c
	arch/arm/mach-u300/timer.c
2009-06-14 11:01:44 +01:00
Russell King 0609996100 Merge branch 'stmp' into devel 2009-06-14 11:01:05 +01:00
Russell King 4c31791c3d Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel 2009-06-14 11:00:16 +01:00
Russell King 2631182bf9 Merge branch 'w90x900' into devel 2009-06-11 15:23:26 +01:00
wanzongshun cc63262f27 [ARM] 5550/1: Add default configure file for w90p910 platform
Add default configure file for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-11 14:45:19 +01:00
Russell King b0efb42478 Merge branch 'ep93xx' into devel 2009-06-10 22:40:04 +01:00
Russell King 1ee73784b6 Merge branch 'for_rmk' of git://dev.omapzoom.org/pub/scm/santosh/kernel-omap4-base into devel 2009-06-10 22:38:27 +01:00
Santosh Shilimkar b549561066 ARM: OMAP4: SMP: Update defconfig for OMAP4430
This patch updates omap_4430sdp_defconfig to add SMP and LOCAL_TIMER
support for OMAP4430 SDP platform.
Additionally the defconfig is made in sync with 2.6.30-rc7

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2009-06-09 13:04:13 +05:30
Russell King 7698fdedcf Merge branch 'for-rmk' of git://git.marvell.com/orion into devel 2009-06-08 19:27:13 +01:00
Lennert Buytenhek 91af7bb2f4 [ARM] Kirkwood: add Marvell 88F6281 GTW GE board support
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2009-06-08 13:04:55 -04:00
Rabeeh Khoury e50b6befae [ARM] Kirkwood: CPU idle driver
The patch adds support for Kirkwood cpu idle.
Two idle states are defined:
1. Wait-for-interrupt (replacing default kirkwood wfi)
2. Wait-for-interrupt and DDR self refresh

Signed-off-by: Rabeeh Khoury <rabeeh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-08 13:04:41 -04:00
Mike Rapoport f6394e268f [ARM] pxa/cm-x300: update defconfig
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:50:28 +08:00
Philipp Zabel dd045445f8 [ARM] pxa: magician_defconfig enable hx4700, asic3 and w100fb
I'm not going to maintain separate defconfigs for magician and hx4700.
This should probably be renamed to htcpxa_defconfig.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:40:43 +08:00
Alexander Clouter a914d4309c [ARM] orion: add hwrng timeriomem hook to TS-78xx
Add hook so that the HW RNG source on the TS-78xx is available.

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-03 15:29:40 -04:00
Linus Walleij eb366d4c95 [ARM] 5533/1: Add U300 series defconfig
This adds a defconfig for the U300 series ST-Ericsson mobile
platforms. It will be maintained to enable the maximum set of
drivers so as to provide a good regression testing target for
these platforms.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-01 10:03:10 +01:00
Russell King 949abd84cd Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
Conflicts:
	arch/arm/Makefile
2009-05-29 20:03:43 +01:00
Russell King 42f1d2e06a Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci into devel 2009-05-29 10:04:24 +01:00
Kevin Hilman 77bbca138c davinci: defconfig update: add EMAC
DaVinci EMAC driver is now upstream.  Enable it in default defconfig.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-05-28 15:29:37 -07:00
Santosh Shilimkar b04e8975e7 ARM: OMAP4: Add defconfig for 4430 SDP
This patch adds the defconfig for OMAP4430 SDP platform.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-28 14:16:05 -07:00
Syed Mohammed Khasim 1bfc3738c4 ARM: OMAP3: Add omap3 EVM defconfig
Add omap3 EVM defconfig

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-28 14:15:44 -07:00
Vikram Pandita b969a2873d ARM: OMAP3: Defconfig for Zoom2 board
This patch adds OMAP3 Zoom2 board defconfig.

Signed-off-by: Mikkel Christensen <mlc@ti.com>
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-28 14:08:58 -07:00
Juha Yrjola aa62e90fe0 ARM: OMAP2/3: Add generic onenand support when connected to GPMC
Add generic onenand support when connected to GPMC and make the
boards to use it.

The patch has been modified to make it more generic to support all
the boards with GPMC. The patch also remove unused prototype for
omap2_onenand_rephase(void).

Note that board-apollon.c is currently using the MTD_ONENAND_GENERIC
and setting the GPMC timings in the bootloader. Setting the GPMC
timings in the bootloader will not allow supporting frequency
scaling for the onenand source clock.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-28 13:23:52 -07:00
Kevin Hilman 35652fe185 davinci: update davinci_all_defconfig for dm355, dm6467
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-05-26 07:18:15 -07:00
Ryan Mallon 6b5ca05d95 [ARM] 5523/2: Updated ep93xx defconfig
Updated defconfig for ep93xx. By default, support for all boards which
boot from 0x00000000 (SDCE3/SyncBoot) is included. Also updated the
defconfig to use EABI for building the kernel.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-24 19:21:33 +01:00
Russell King fc05505b77 Merge branch 'ixp4xx' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6 into devel 2009-05-23 23:18:40 +01:00
Ivo Clarysse 5ed7449a26 MXC: mx2_defconfig file
Adds a defconfig file for the i.MX21 SoC, targeting
the Freescale i.MX21ADS (M9328MX21ADSE) Application
Development System.

Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:16:45 +02:00
Russell King 0c15702445 Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 2009-05-05 09:22:26 +01:00
Russell King 64724ef8bd Merge branch 'for-rmk' of git://git.marvell.com/orion 2009-05-05 09:22:05 +01:00
Magnus Lilja 25971dfe3a i.MX31: Disable CPU_32v6K in mx3_defconfig.
The i.MX31 ARM11 core is not a v6K core. Disable this option as it
is incompatible with non v6K cores.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-05 09:38:04 +02:00
Valentin Longchamp f1fd4c64af mx31: remove mx31moboard_defconfig
We want to have a mx31_defconfig file that builds a kernel that is able
to boot on all support mx31 systems and thus also can be better tested
by automatic build scripts. For these reasons, this config file is not
needed anymore.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-05 09:36:52 +02:00
Nicolas Pitre 3a5df4bf2a [ARM] mv78xx0: update defconfig
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-05-04 21:09:19 -04:00
Nicolas Pitre 7e14acb440 [ARM] orion5x: update defconfig
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-05-04 21:09:19 -04:00
Nicolas Pitre f2d41ecb0f [ARM] Kirkwood: update defconfig
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-05-04 21:09:19 -04:00
Russell King 10993374f8 Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 2009-04-28 21:41:01 +01:00
dmitry pervushin bf155f8def [ARM] 5463/1: Freescale STMP platform support [10/10]
Default configs for STMP3xxx boards

Signed-off-by: dmitry pervushin <dpervushin@embeddedalley.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-27 10:28:09 +01:00
Philipp Zabel 36b5437f33 [ARM] pxa: remove unused CPU_FREQ_PXA Kconfig symbol
cpufreq drivers for pxa2xx/3xx are now built-in automatically as soon as
CPU_FREQ is enabled.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-27 11:45:42 +08:00
Kevin Hilman 9232fcc999 davinci: add default Kconfig, add HAVE_IDE
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-23 09:27:57 -07:00
Russell King 7f07df540e Merge branch 'defconfig-s3c2410' of git://aeryn.fluff.org.uk/bjdooks/linux 2009-04-17 21:35:56 +01:00