Commit Graph

1257 Commits

Author SHA1 Message Date
Anson Huang 7407188489 clocksource/imx-tpm: Correct -ETIME return condition check
The additional brakects added to tpm_set_next_event's return value
computation causes (int) forced type conversion NOT taking effect, and the
incorrect value return will cause various system timer issue, like RCU
stall etc..

Remove the additional brackets to make sure tpm_set_next_event always
returns correct value.

Fixes: 059ab7b82e ("clocksource/drivers/imx-tpm: Add imx tpm timer support")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Dong Aisheng <Aisheng.dong@nxp.com>
Cc: stable@vger.kernel.org
Cc: daniel.lezcano@linaro.org
Cc: Linux-imx@nxp.com
Link: https://lkml.kernel.org/r/1524117883-2484-1-git-send-email-Anson.Huang@nxp.com
2018-04-19 13:21:35 +02:00
Linus Torvalds d95c884439 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull missed timer updates from Thomas Gleixner:
 "This is a branch which got forgotten during the merge window, but it
  contains only fixes and hardware enablement. No fundamental changes.

   - Various fixes for the imx-tpm clocksource driver

   - A new timer driver for the NCPM7xx SoC family"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/imx-tpm: Add different counter width support
  clocksource/drivers/imx-tpm: Correct some registers operation flow
  clocksource/drivers/imx-tpm: Fix typo of clock name
  dt-bindings: timer: tpm: fix typo of clock name
  clocksource/drivers/npcm: Add NPCM7xx timer driver
  dt-binding: timer: document NPCM7xx timer DT bindings
2018-04-16 12:44:03 -07:00
Linus Torvalds 167569343f ARM: SoC platform updates for 4.17
This release brings up a new platform based on the old ARM9 core: the
 Nuvoton NPCM is used as a baseboard management controller, competing
 with the better known ASpeed AST2xx series.
 
 Another important change is the addition of ARMv7-A based chips
 in mach-stm32. The older parts in this platform are ARMv7-M based
 microcontrollers, now they are expanding to general-purpose workloads.
 
 The other changes are the usual defconfig updates to enable additional
 drivers, lesser bugfixes. The largest updates as often are the ongoing
 OMAP cleanups, but we also have a number of changes for the older
 PXA and davinci platforms this time.
 
 For the Renesas shmobile/r-car platform, some new infrastructure
 is needed to make the watchdog work correctly.
 
 Supporting Multiprocessing on Allwinner A80 required a significant
 amount of new code, but is not doing anything unexpected.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaxibSAAoJEGCrR//JCVInPwcP/2ZdLMXXXaJBM+rCRPhT+vR1
 FsKqcTCC5RHbVcKW+N54nmlsqofy2GadlmyfOdrFXtbf+Sm2dRNsDrHDOhvoPp37
 fwBd0wGw0PLjNE8SEPp/ldtFe11Dbg0WGBzJ4PAPJgt1W4hvW8//VzVW1XsiRrVc
 9SlZ66DwR95UQ5pwy+dfE8f9A/WW4XaMq0UHQ3/deQ/Te/64b/C6CJtT3W73WAlR
 83UHgkwq3WvI+hhvg4QX9H0Q6dcK2JLUWsAB0xnZP8Q8t30NdDpl61uZL0A4Mh9Y
 38lPhUjPUyUpsGrOttmMEQNzbAk4m/nzQxByYYmhkx3x+mlhjdA9KNavxDYVxXN2
 1tzz62wst8pLePqVt2UsFqsaruJGMuTIooOdc5iCjG1c2N2kQGdBsuOvLjYu9kV6
 XPTfvvAYkMo9rC0MbdPuobG+h/WrYHuc9SD2Mnt+kNaw1yJL08fWENjSuwP7kheb
 2A5jdAFNrGqgcrWMsQOw8eYYC7z7WojkLq0kHrBbwIlVD7KIZurv2fm/iVo4+xPH
 Gig5HuehMUtVYAf+Q1KWFlqS01fXMErt2pDGI5f1mNumXCB5kdWoSKbU8lOg03f8
 ZqBHlfly+QDMOx0qfkxFX+phHPWHTOC+45yHK2Xq+n9urXmQbzYZxTzq5zCu6jcm
 4yH0jaykoHODGNLIt50f
 =HD9V
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "This release brings up a new platform based on the old ARM9 core: the
  Nuvoton NPCM is used as a baseboard management controller, competing
  with the better known ASpeed AST2xx series.

  Another important change is the addition of ARMv7-A based chips in
  mach-stm32. The older parts in this platform are ARMv7-M based
  microcontrollers, now they are expanding to general-purpose workloads.

  The other changes are the usual defconfig updates to enable additional
  drivers, lesser bugfixes. The largest updates as often are the ongoing
  OMAP cleanups, but we also have a number of changes for the older PXA
  and davinci platforms this time.

  For the Renesas shmobile/r-car platform, some new infrastructure is
  needed to make the watchdog work correctly.

  Supporting Multiprocessing on Allwinner A80 required a significant
  amount of new code, but is not doing anything unexpected"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits)
  arm: npcm: modify configuration for the NPCM7xx BMC.
  MAINTAINERS: update entry for ARM/berlin
  ARM: omap2: fix am43xx build without L2X0
  ARM: davinci: da8xx: simplify CFGCHIP regmap_config
  ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data
  ARM: multi_v7_defconfig: add NXP FlexCAN IP support
  ARM: multi_v7_defconfig: enable thermal driver for i.MX devices
  ARM: multi_v7_defconfig: add RN5T618 PMIC family support
  ARM: multi_v7_defconfig: add NXP graphics drivers
  ARM: multi_v7_defconfig: add GPMI NAND controller support
  ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs
  ARM: multi_v7_defconfig: configure I2C driver built-in
  arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE
  ARM: imx: fix imx6sll-only build
  ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well
  ARM: mxs_defconfig: Re-sync defconfig
  ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver
  ARM: imx_v4_v5_defconfig: Re-sync defconfig
  arm64: defconfig: enable stmmac ethernet to defconfig
  ARM: EXYNOS: Simplify code in coupled CPU idle hot path
  ...
2018-04-05 21:21:08 -07:00
Linus Torvalds f5a8eb632b arch: remove obsolete architecture ports
This removes the entire architecture code for blackfin, cris, frv, m32r,
 metag, mn10300, score, and tile, including the associated device drivers.
 
 I have been working with the (former) maintainers for each one to ensure
 that my interpretation was right and the code is definitely unused in
 mainline kernels. Many had fond memories of working on the respective
 ports to start with and getting them included in upstream, but also saw
 no point in keeping the port alive without any users.
 
 In the end, it seems that while the eight architectures are extremely
 different, they all suffered the same fate: There was one company
 in charge of an SoC line, a CPU microarchitecture and a software
 ecosystem, which was more costly than licensing newer off-the-shelf
 CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems
 that all the SoC product lines are still around, but have not used the
 custom CPU architectures for several years at this point. In contrast,
 CPU instruction sets that remain popular and have actively maintained
 kernel ports tend to all be used across multiple licensees.
 
 The removal came out of a discussion that is now documented at
 https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
 marking any ports as deprecated but remove them all at once after I made
 sure that they are all unused. Some architectures (notably tile, mn10300,
 and blackfin) are still being shipped in products with old kernels,
 but those products will never be updated to newer kernel releases.
 
 After this series, we still have a few architectures without mainline
 gcc support:
 
 - unicore32 and hexagon both have very outdated gcc releases, but the
   maintainers promised to work on providing something newer. At least
   in case of hexagon, this will only be llvm, not gcc.
 
 - openrisc, risc-v and nds32 are still in the process of finishing their
   support or getting it added to mainline gcc in the first place.
   They all have patched gcc-7.3 ports that work to some degree, but
   complete upstream support won't happen before gcc-8.1. Csky posted
   their first kernel patch set last week, their situation will be similar.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJawdL2AAoJEGCrR//JCVInuH0P/RJAZh1nTD+TR34ZhJq2TBoo
 PgygwDU7Z2+tQVU+EZ453Gywz9/NMRFk1RWAZqrLix4ZtyIMvC6A1qfT2yH1Y7Fb
 Qh6tccQeLe4ezq5u4S/46R/fQXu3Txr92yVwzJJUuPyU0arF9rv5MmI8e6p7L1en
 yb74kSEaCe+/eMlsEj1Cc1dgthDNXGKIURHkRsILoweysCpesjiTg4qDcL+yTibV
 FP2wjVbniKESMKS6qL71tiT5sexvLsLwMNcGiHPj94qCIQuI7DLhLdBVsL5Su6gI
 sbtgv0dsq4auRYAbQdMaH1hFvu6WptsuttIbOMnz2Yegi2z28H8uVXkbk2WVLbqG
 ZESUwutGh8MzOL2RJ4jyyQq5sfo++CRGlfKjr6ImZRv03dv0pe/W85062cK5cKNs
 cgDDJjGRorOXW7dyU6jG2gRqODOQBObIv3w5efdq5OgzOWlbI4EC+Y5u1Z0JF/76
 pSwtGXA6YhwC+9LLAlnVTHG+yOwuLmAICgoKcTbzTVDKA2YQZG/cYuQfI5S1wD8e
 X6urPx3Md2GCwLXQ9mzKBzKZUpu/Tuhx0NvwF4qVxy6x1PELjn68zuP7abDHr46r
 57/09ooVN+iXXnEGMtQVS/OPvYHSa2NgTSZz6Y86lCRbZmUOOlK31RDNlMvYNA+s
 3iIVHovno/JuJnTOE8LY
 =fQ8z
 -----END PGP SIGNATURE-----

Merge tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pul removal of obsolete architecture ports from Arnd Bergmann:
 "This removes the entire architecture code for blackfin, cris, frv,
  m32r, metag, mn10300, score, and tile, including the associated device
  drivers.

  I have been working with the (former) maintainers for each one to
  ensure that my interpretation was right and the code is definitely
  unused in mainline kernels. Many had fond memories of working on the
  respective ports to start with and getting them included in upstream,
  but also saw no point in keeping the port alive without any users.

  In the end, it seems that while the eight architectures are extremely
  different, they all suffered the same fate: There was one company in
  charge of an SoC line, a CPU microarchitecture and a software
  ecosystem, which was more costly than licensing newer off-the-shelf
  CPU cores from a third party (typically ARM, MIPS, or RISC-V). It
  seems that all the SoC product lines are still around, but have not
  used the custom CPU architectures for several years at this point. In
  contrast, CPU instruction sets that remain popular and have actively
  maintained kernel ports tend to all be used across multiple licensees.

  [ See the new nds32 port merged in the previous commit for the next
    generation of "one company in charge of an SoC line, a CPU
    microarchitecture and a software ecosystem"   - Linus ]

  The removal came out of a discussion that is now documented at
  https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
  marking any ports as deprecated but remove them all at once after I
  made sure that they are all unused. Some architectures (notably tile,
  mn10300, and blackfin) are still being shipped in products with old
  kernels, but those products will never be updated to newer kernel
  releases.

  After this series, we still have a few architectures without mainline
  gcc support:

   - unicore32 and hexagon both have very outdated gcc releases, but the
     maintainers promised to work on providing something newer. At least
     in case of hexagon, this will only be llvm, not gcc.

   - openrisc, risc-v and nds32 are still in the process of finishing
     their support or getting it added to mainline gcc in the first
     place. They all have patched gcc-7.3 ports that work to some
     degree, but complete upstream support won't happen before gcc-8.1.
     Csky posted their first kernel patch set last week, their situation
     will be similar

  [ Palmer Dabbelt points out that RISC-V support is in mainline gcc
    since gcc-7, although gcc-7.3.0 is the recommended minimum  - Linus ]"

This really says it all:

 2498 files changed, 95 insertions(+), 467668 deletions(-)

* tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits)
  MAINTAINERS: UNICORE32: Change email account
  staging: iio: remove iio-trig-bfin-timer driver
  tty: hvc: remove tile driver
  tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers
  serial: remove tile uart driver
  serial: remove m32r_sio driver
  serial: remove blackfin drivers
  serial: remove cris/etrax uart drivers
  usb: Remove Blackfin references in USB support
  usb: isp1362: remove blackfin arch glue
  usb: musb: remove blackfin port
  usb: host: remove tilegx platform glue
  pwm: remove pwm-bfin driver
  i2c: remove bfin-twi driver
  spi: remove blackfin related host drivers
  watchdog: remove bfin_wdt driver
  can: remove bfin_can driver
  mmc: remove bfin_sdh driver
  input: misc: remove blackfin rotary driver
  input: keyboard: remove bf54x driver
  ...
2018-04-02 20:20:12 -07:00
Linus Torvalds c9297d2841 This tag contains the core nds32 Linux port(including interrupt controller
driver and timer driver), which has been through 7 rounds of review on mailing
 list.
 
 It is able to boot to shell and passes most LTP-2017 testsuites in nds32 AE3XX
 platform.
 Total Tests: 1901
 Total Skipped Tests: 618
 Total Failures: 78
 
 Copied below is the ChangeLog that contains the history of this patch set:
 Changes in v7:
  - Update cpu binding document to add "andestech,nds32v3" as fallback
  - Remove unnecessary configs of arch/nds32/Kconfig
  - Use GENERIC_CALIBRATE_DELAY
  - Add more help texts for minimum CPU type config
  - Update defconfig because of Kconfig changed and bug fixed
  - Move early_trap_init() declaration to nds32.h
  - Refine dma.c
  - Remove apply_relocate() in module.c and include <linux/moduleloader.h> to catch it
  - Add do_kernel_restart() in machine_restart()
  - Clean up setup.c to remove CONFIG_VGA_CONSOLE and some extern declaration functions
  - Add negative dependency for VGA_CONSOLE on nds32
  - Refine ptrace.c and arch/nds32/include/asm/ptrace.h
  - Refine syscall restart flow and arch/nds32/kernel/signal.c
  - Fix a bug in VDSO
  - Remove the handling for kernel code unaligned accessing
  - Add a description for unaligned access handling in git commit message.
  - Rebase to v4.16-rc1
  - Replace ACCESS_ONCE with READ_ONCE
  - Replace atomic_long_dec(&mm->nr_ptes) with mm_dec_nr_ptes(mm)
  - Remove print_symbol(%s) with printk(%pS)
  - Add bpf_perf_event.h
  - Remove init_stack and init_thread_info
 
 Changes in v6:
  - Refine naming for atl2c
  - Refine ae3xx.dts
  - Remove CONFIG_TIMER_ATCPIT100 in defconfig
  - Refine elf.h
  - Fix a vdso bug
  - Separate arch patchset and timer patchset
  - To select TIMER_OF in drivers/clocksource/Kconfig instead of arch/nds32/Kconfig
 
 Changes in v5:
  - Remove __NR__llseek  and sys_mmap()
  - Add a comment to explain that we don't have clocksource cycle counter in the CPU
  - Add volatile in iounmap()
  - Fix typo Featuretures to Features
  - Replace CPU_CACHE_NONALIASING with !CPU_CACHE_ALIASING
  - Fix a endian bug when we try to get val = of_get_property(cpu,"clock-frequency", NULL)
  - Add screen_info to fix the building error when CONFIG_ VGA_CONSOLE is enabled
  - Remove unnecessary msync()
  - Add depends on !64BIT || BROKEN for faraday Kconfig because the descriptor only supports 32bit
  - Add atl2c binding document
  - Remove unnecessary include headers
  - Fix a vector table bug. It placed wrong vector handlers for 2 exceptions.
  - Fix a vdso bug. It may encounter TLB multi-hit exception because we accidently set it as a global page.
  - Add proper isb and barrier after some cache operations
  - Fix a bug in system call restart flow. $r0 ~ $r5 does not be recovered before restarting system call
  - Fix the build errors for OpenRISC and SPARC because io.h changed.
  - Update ae3xx.dts to support atl2c.
 
 Changes in v4:
  - Add atcpit100 timer driver due to it include vdso implementations and sent
    them together with nds32 may help reviewer to review.
  - Update ae3xx.dts for atcpit100 clock setting and remove vdso settings.
  - To get cycle counter register by timer driver instead of dts.
  - Use "depends on NDS32 || COMPILE_TEST" in atcpit100 driver because it is needed for nds32 vdso
  - Update defconfig becasue kconfig rename from CONFIG_CLKSRC_ATCPIT100 to CONFIG_TIMER_ATCPIT100
  - Remove ag101p.dts because we are not yet ready for ag101p platform.
  - Update copyright style to SPDX-License-Identifier
  - Include <linux/uaccess.h> instead of <asm/uaccess.h>
  - Add local_irq_save()/local_irq_restore() to protect SR_TLB_VPN in update_mmu_cache().
  - Update cpu_dcache_inval_all implementation to make sure all level cache are writeback.
 
 Changes in v3:
  - Use arch's io.h instead of generic one
  - Add andestech-boards binding document
  - Update nds32/cpus.txt binding document
  - Remove atcpit100 timer drivers
  - Select NO_BOOTMEM and delete HAVE_MEMBLOCK_NODE_MAP
  - make CPU_BIG_ENDIAN and CPU_LITTLE_ENDIAN are dependent
  - Add cpu type to select HWZOL/CPU_CACHE_ALIASING
  - Change CPU_CACHE_NONALIASING to CPU_CACHE_ALIASING
  - Remove bootarg from device tree script
  - Update ag101p.dts and ae3xx.dts for correct board name.
  - Clear and simplify defconfig
  - Implement L2C_R_REG/ L2C_W_REG with readl/writel instead of __raw_readl/__raw_writel for endian save
  - Remove early_init_dt_add_memory_arch/early_init_dt_alloc_memory_arch to use the generic ones
  - Refine devicetree.c
  - Fix bug https://lkml.kernel.org/r/1499782590-31366-1-git-send-ema...
  - Refine irqchip/irq-ativic32.c implementations
  - Add COMPILE_TEST in drivers/net/ethernet/faraday/Kconfig
  - Refine cache operations
  - Add CONFIG_HW_SUPPORT_UNALIGNMENT_ACCESS
  - Fix ZERO_PAGE define
  - Remove SA_RESTORER
  - Remove uapi/asm/signal.h
  - Redefine user_pt_regs
  - Remove spinlock.h
  - Remove __ARCH_WANT_RENAMEAT and __ARCH_WANT_SYSCALL_OFF_T from unistd.h
  - Remove set_fs(USER_DS) because flush_old_exec() will do this setting
  - Replace in_atomic() with faulthandler_disabled()
  - Add barrier.h
  - Select COMMON_CLK
  - Add clk_pll in dts
  - Add of_clk_init() in arch/nds32/kernel/time.c
 
 Changes in v2:
  - Set GENERIC_CALIBRATE_DELAY default n
  - Add earlycon support
  - Remove earlyprintk
  - Add CPU_BIG_ENDIAN, CPU_LITTLE_ENDIAN support
  - Refine unalignment access exception handler
  - Add VMSPLIT support
  - Use only one defconfig
  - Change interrupt-cells from 2 to 1
  - Refine andestech cpu names in bindings/nds32/cpus.txt
  - Get clock frequency in dts because fpga bitmap doesn't include this feature
  - Update MAINTAINERS for bindings
  - Remove unused configs in Kconfig
  - Refine device tree scripts
  - Refine coding style
  - Use generic ioremap_nocache
  - Remove L2CC_PA_BASE define and its codes in head.S. It will be moved to bootloader.
  - Set PHYS_OFFSET to 0x0 instead of CONFIG_MEMORY_START
  - Remove unused macros
  - Simplify cpu_cache_* API
  - Change __asm__ __volatile__ to asm volatile
  - Refine uaccess.h
  - Remove unused/deprecated syscall
  - Use generic posix_types.h
  - Remove arch_trace_hardirqs_on/arch_trace_hardirqs_off
  - Fix bug of restart syscall
  - Refine syscall implementations
  - Use IS_ENABLED to replace ifdef as possible
  - Remove device_initcall(nds32_device_probe)
  - Refine vdso implementations
  - Refine copy_from_user()/copy_to_user()/clear_user()/get_user()/memmove()/memcpy()
  - Refine ioremap.c
  - Refine irq-ativic32.c
  - Fix a bug of earlycon.c
  - Export ioremap_nocache/ioremap_uc/ioremap_wc/ioremap_wt
  - Add atcpit100 driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.17 (GNU/Linux)
 
 iQIcBAABAgAGBQJawZ28AAoJEHfB0l0b2JxExKYQAJ7btaPeIplIndrphlTQkfzW
 d1AhVBhwAlvqsOcFf+kwVIqOnfcLCtzVvgc63qc6mAroDZKcd+uuqOtkC801b33i
 jxcfSX802PciT3VhE8xz9OWFY9D3in/UCBhGe2OvY/cD/eC34gZhUqJhML/ioR5q
 DNPvua6lgYIN9VrFds19MjRzl7RwDBqNccQoFTXWc9Hl1Vs0YdKdbkOz0IWNtoLQ
 crP0v/UuHMC++WdU+MvDIEFqNVuXikg/NA+odPIbp3eF3xcmQBM0blWAi37eOKFo
 rzTw7TKtL8xObjvhyzx3aYFKPpLBfuYwk8onoZlthlqcwFClZy4lzdDdDxJhKiJ6
 5hilzCSqEWXB9osQsrWgAuK1rNRvroChIp6/rcdGAq33mTPLVydx7hSKELhE7wuN
 UUaiJSSNRG1ZrR8tkccQpaRBjJ/gfXWGC3ys723oWz8A4bDzMkvZVzdOGOEZ+CsI
 w4HKNHLeY50wztV6dDSiVPhvUXQjBH9qd2zVHlutbfulPI/XNkGRfWpEGVT1zD4y
 pO3aHVJfsv+8aeyVBcXyN74O34a9HYa7811v7V5RI+uftdPhkzOwxuMQVMMJPe3s
 4u4NglP7fekeWyDGCXFKOGoVOuCAUPHuzBUCFjL/cStHjrkBGVQvL1I925sJNabu
 IatFh62x8Ez4m2hIf5fg
 =J/YF
 -----END PGP SIGNATURE-----

Merge tag 'nds32-for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux

Pull nds32 architecture support from Greentime Hu:
 "This contains the core nds32 Linux port (including interrupt
  controller driver and timer driver), which has been through seven
  rounds of review on mailing list.

  It is able to boot to shell and passes most LTP-2017 testsuites in
  nds32 AE3XX platform:

    Total Tests: 1901
    Total Skipped Tests: 618
    Total Failures: 78"

Reviewed-by: Arnd Bergmann <arnd@arndb.de>

* tag 'nds32-for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux: (44 commits)
  nds32: To use the generic dump_stack()
  nds32: fix building failed if using elf toolchain.
  nios2: add ioremap_nocache declaration before include asm-generic/io.h.
  nds32: fix building failed if using older version gcc.
  dt-bindings: timer: Add andestech atcpit100 timer binding doc
  clocksource/drivers/atcpit100: VDSO support
  clocksource/drivers/atcpit100: Add andestech atcpit100 timer
  net: faraday add nds32 support.
  irqchip: Andestech Internal Vector Interrupt Controller driver
  dt-bindings: interrupt-controller: Andestech Internal Vector Interrupt Controller
  dt-bindings: nds32 SoC Bindings
  dt-bindings: nds32 L2 cache controller Bindings
  dt-bindings: nds32 CPU Bindings
  MAINTAINERS: Add nds32
  nds32: Build infrastructure
  nds32: defconfig
  nds32: Miscellaneous header files
  nds32: Device tree support
  nds32: Generic timers support
  nds32: Loadable modules
  ...
2018-04-02 19:41:08 -07:00
Anson Huang 0136c741ff clocksource/drivers/imx-tpm: Add different counter width support
Different TPM modules have different width counters which is 16-bit or 32-bit,
the counter width can be read from TPM_PARAM register bit[23:16], this patch
adds dynamic check for counter width to support both 16-bit and 32-bit TPM
modules.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-03-30 22:44:11 +02:00
Anson Huang 506a7be93f clocksource/drivers/imx-tpm: Correct some registers operation flow
According to i.MX7ULP reference manual, TPM_SC_CPWMS can ONLY be written when
counter is disabled, TPM_SC_TOF is write-1-clear, TPM_C0SC_CHF is also
write-1-clear, correct these registers initialization flow;

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-03-30 22:44:11 +02:00
Anson Huang 16328e7bd4 clocksource/drivers/imx-tpm: Fix typo of clock name
The clock name should be ipg instead of igp.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-03-30 22:44:10 +02:00
Tomer Maimon 1c00289ecd clocksource/drivers/npcm: Add NPCM7xx timer driver
Add Nuvoton BMC NPCM7xx timer driver.

The clocksource Enable 24-bit TIMER0 and TIMER1 counters,
while TIMER0 serve as clockevent and TIMER1 serve as clocksource.

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-03-30 22:44:09 +02:00
Masahiro Yamada bd2746f09e clocksource/atmel-st: Add 'depends on HAS_IOMEM' to fix unmet dependency
The ATMEL_ST config selects MFD_SYSCON, but does not depend on HAS_IOMEM.

Compile testing on architecture without HAS_IOMEM causes "unmet direct
dependencies" in Kconfig phase. Detected by "make ARCH=score allyesconfig".

Add the proper dependency to the ATMEL_ST config.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/1520335233-11277-1-git-send-email-yamada.masahiro@socionext.com
2018-03-09 11:11:58 +01:00
Arnd Bergmann b67aea2bba Remove metag architecture
These patches remove the metag architecture and tightly dependent
 drivers from the kernel. With the 4.16 kernel the ancient gcc 4.2.4
 based metag toolchain we have been using is hitting compiler bugs, so
 now seems a good time to drop it altogether.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEd80NauSabkiESfLYbAtpk944dnoFAlqdcgQACgkQbAtpk944
 dno/1BAAvaiRcKcNxMrYkxG+Wn4r68odu7+E1dy99AaUnvPFT42R5XLMOv4BCu/Y
 bhMQ14lMJ9ZBKdYg9E97ulTV0YFhCBHuEWDyDnk/G3CVAEvdPuAQ6ktHDZxRQBFK
 JoTUKky53OZbWU9KhLeWpFg4F4E64FBm1kyAkqhs8pPM/LwmrxwIG2sxdTTqkhkc
 b+6ABf2NKtmQwHXWmKWCB8rmXMzulYth2ePC/r9MVj92xGKxADsiFArZk4kmoIUb
 H5eZ8FkemtUEfZp600dsGR/ffaTBwZJ3SULSkAklUnrcvdIRM+Fu8osG8O8yQKTd
 H7xnmtTJ2kCnhhuUMxt6v8WrDbKB8JdFxFOpXW93YKpKAkiGMvoUEZjlwPYIqWxL
 xtnDb9Rv+uZ4RpqZf9AtE4Td8lHTH7OZ78RDs9eMo6n1ZIr5CwcLaM2k5skAeyPr
 yt1lXePhXFqSS+OpOV6hn95ROqlkuZgvPfkcdNpCJPfM4SpfRLlUjIVqiVK0LDRk
 FAkk0VIfzjjNuyV9yr2XXuw90DerhFUgUl6ZYggkgf6umOHhZQdDTFr8gsfvaLm1
 1k1banUEF1tpDcUeShylDvqNmVSZZC6siTQMA7T0zjbjYJD25hJWLpFEcPkx/Anp
 4oGQNNoe4WgJIrJAoTJTiBVwC/xLDeZV6b5t2pOXBlH+v2eKgMg=
 =zDIl
 -----END PGP SIGNATURE-----

Merge tag 'metag_remove_2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jhogan/metag into asm-generic

Remove metag architecture

These patches remove the metag architecture and tightly dependent
drivers from the kernel. With the 4.16 kernel the ancient gcc 4.2.4
based metag toolchain we have been using is hitting compiler bugs, so
now seems a good time to drop it altogether.

* tag 'metag_remove_2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  i2c: img-scb: Drop METAG dependency
  media: img-ir: Drop METAG dependency
  watchdog: imgpdc: Drop METAG dependency
  MAINTAINERS/CREDITS: Drop METAG ARCHITECTURE
  tty: Remove metag DA TTY and console driver
  clocksource: Remove metag generic timer driver
  irqchip: Remove metag irqchip drivers
  Drop a bunch of metag references
  docs: Remove remaining references to metag
  docs: Remove metag docs
  metag: Remove arch/metag/

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-07 22:18:39 +01:00
Arnd Bergmann 6f566c4f30 Move omap timer to drivers for 4.17
This series from Keerthy and Ladislav Michl move omap dmtimer code
 to drivers. As we don't want to export custom timer functions to
 random drivers, we also need to update the related PWM driver to
 pass the timer specific functions in platform data.
 
 Note that this series is based on a merge of omap1 specific timer
 fix and omap2+ platform data clean-up to keep things working and
 make the move a bit simpler.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlqdd1IRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXNziQ/+OywQPRLgeYodIl5AXJCMaZhyFJPN1BP3
 OXsDllCnqJOpH4yjIPz4WoEI3ciVRJw+iBOl28pDtomdyejyE9qx/FmIhL081Wgm
 T7TgJTieungliRfZu3UWRJdinpEyEzvTtEWlSVWa++lH5Bsub7lIPJsZ3A2bYVMh
 9n6uE9bzU/ECdq/1hP9fhM2rssf8mu5l1IKlYmPWuxoFm/YSYoiyneU+rOILnJQ6
 dsbc71p3+VdsZBDI+nMGcLE923LGXKEmxlHoR9+9EY12MOIwbTt/jxcI8j+Iugfk
 vetncsXbpKnbutTP1iXr64IXa5QFOZKtMNlfNqLo4aihWMJ6tV4570w/pxk/qMgq
 +qCidWm9RgVUm1N4t8kMm8aWm1BC1L8g9fw2/l0JFBHcuIlOYewa6cZ6gcUI6XxN
 BqcET9iyxG9HgqgB6yekHRI3niywgGcpw420RS0DLmxIzpnpeQHGkXrva0tVcVS7
 4SZ9UWgLQVCKgm/8mSDv4PkIzuPXyu4fqjxzMihQdNUHAG1xeqODfU8SLsItW43a
 sGojvPPNWhCyvL2hpWuyWsRSOTc8MyAteeowYN1PzoSCO0cI3MTL0TUpxRTBV/9/
 y1l5DYmdc1HUARXxJWreBSl3uToADguqzYUv3rHe/B20+LA19F9GRzoc9uOhqTGn
 ePjiA5EC64o=
 =2B8N
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.17/timer-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Pull "Move omap timer to drivers for 4.17" from Tony Lindgren:

This series from Keerthy and Ladislav Michl move omap dmtimer code
to drivers. As we don't want to export custom timer functions to
random drivers, we also need to update the related PWM driver to
pass the timer specific functions in platform data.

Note that this series is based on a merge of omap1 specific timer
fix and omap2+ platform data clean-up to keep things working and
make the move a bit simpler.

* tag 'omap-for-v4.17/timer-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  clocksource: timer-ti-dm: Check prescaler value
  clocksource: timer-ti-dm: Consolidate set source
  clocksource: timer-ti-dm: Make unexported functions static
  ARM: OMAP: pdata-quirks: Remove unused timer pdata
  pwm: pwm-omap-dmtimer: Adapt driver to utilize dmtimer pdata ops
  clocksource: timer-ti-dm: Hook device platform data if not already assigned
  clocksource: timer-ti-dm: Populate the timer ops to the pdata
  clocksource: timer-ti-dm: Add timer ops to the platform data structure
  ARM: OMAP: Move dmtimer driver out of plat-omap to drivers under clocksource
  clocksource: timer-ti-dm: Replace architecture
  ARM: OMAP: Move dmtimer.h out of plat-omap
  ARM: OMAP: timer: Wrap the inline functions under OMAP2PLUS define
  ARM: OMAP: dmtimer: Remove all the exports
  ARM: OMAP: Fix dmtimer init for omap1
2018-03-07 16:16:07 +01:00
Ladislav Michl 58a54f03e7 clocksource: timer-ti-dm: Check prescaler value
Invalid value silently disables use of the prescaler.
Use -1 explicitely for that purpose and error out on
invalid value.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28 13:41:30 -08:00
Ladislav Michl ad6e4b6fdc clocksource: timer-ti-dm: Consolidate set source
Reorder omap_dm_timer_set_source internals to get
source verification more straightforward.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28 13:41:20 -08:00
Ladislav Michl 592ea6bd1f clocksource: timer-ti-dm: Make unexported functions static
As dmtimer no longer exports functions, make those previously
exported static (this requires few functions to be moved around
as their prototypes were deleted).

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28 13:38:10 -08:00
Vineet Gupta a4f538573c clocksource/drivers/arc_timer: Update some comments
TIMER0 interrupt ACK is different for ARC700 and HS3x cores.

This came to light in some internal discussions and it is nice to have this
documented rather than digging up the PRM (Programmers Reference Manual).

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Link: https://lkml.kernel.org/r/1519241491-12570-1-git-send-email-vgupta@synopsys.com
2018-02-28 13:55:14 +01:00
Felix Fietkau 5753405e27 clocksource/drivers/mips-gic-timer: Use correct shift count to extract data
__gic_clocksource_init() extracts the GIC_CONFIG_COUNTBITS field from
read_gic_config() by right shifting the register value. The shift count is
determined by the most significant bit (__fls) of the bitmask which is
wrong as it shifts out the complete bitfield.

Use the least significant bit (__ffs) instead to shift the bitfield down to
bit 0.

Fixes: e07127a077 ("clocksource: mips-gic-timer: Use new GIC accessor functions")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: daniel.lezcano@linaro.org
Cc: paul.burton@imgtec.com
Link: https://lkml.kernel.org/r/20180228095610.50341-1-nbd@nbd.name
2018-02-28 13:55:14 +01:00
Colin Ian King f287eb9013 clocksource/drivers/fsl_ftm_timer: Fix error return checking
The error checks on freq for a negative error return always fails because
freq is unsigned and can never be negative. Fix this by making freq a
signed long.

Detected with Coccinelle:
drivers/clocksource/fsl_ftm_timer.c:287:5-9: WARNING: Unsigned expression
compared with zero: freq <= 0
drivers/clocksource/fsl_ftm_timer.c:291:5-9: WARNING: Unsigned expression
compared with zero: freq <= 0

Fixes: 2529c3a330 ("clocksource: Add Freescale FlexTimer Module (FTM) timer support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: kernel-janitors@vger.kernel.org
Link: https://lkml.kernel.org/r/20180226113614.3092-1-colin.king@canonical.com
2018-02-26 13:56:05 +01:00
James Hogan b79a732504
clocksource: Remove metag generic timer driver
Now that arch/metag/ has been removed, remove the metag generic
per-thread timer driver. It is of no value without the architecture
code.

Signed-off-by: James Hogan <jhogan@kernel.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-metag@vger.kernel.org
2018-02-23 14:30:20 +00:00
Ladislav Michl 1a3acad266 clocksource: timer-ti-dm: Hook device platform data if not already assigned
In the case of device tree boot the device platform data is usually
NULL so hook the platform data obtained from the match.
As part of un-constify the platform_data pointer.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-22 10:54:14 -08:00
Keerthy 76234f7c07 clocksource: timer-ti-dm: Populate the timer ops to the pdata
Add the timer ops to the platform data

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Tested-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-22 10:54:07 -08:00
Keerthy af04aa856e ARM: OMAP: Move dmtimer driver out of plat-omap to drivers under clocksource
Move the dmtimer driver out of plat-omap to clocksource.
So that non-omap devices also could use this.

No Code changes done to the driver file only renamed to timer-ti-dm.c.
Also removed the config dependencies for OMAP_DM_TIMER.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Tested-by: Ladislav Michl <ladis@linux-mips.org>
[tony@atomide.com: add select omap_dm_timer for omap16xx]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-22 10:53:52 -08:00
Ingo Molnar ed7158bae4 treewide/trivial: Remove ';;$' typo noise
On lkml suggestions were made to split up such trivial typo fixes into per subsystem
patches:

  --- a/arch/x86/boot/compressed/eboot.c
  +++ b/arch/x86/boot/compressed/eboot.c
  @@ -439,7 +439,7 @@ setup_uga32(void **uga_handle, unsigned long size, u32 *width, u32 *height)
          struct efi_uga_draw_protocol *uga = NULL, *first_uga;
          efi_guid_t uga_proto = EFI_UGA_PROTOCOL_GUID;
          unsigned long nr_ugas;
  -       u32 *handles = (u32 *)uga_handle;;
  +       u32 *handles = (u32 *)uga_handle;
          efi_status_t status = EFI_INVALID_PARAMETER;
          int i;

This patch is the result of the following script:

  $ sed -i 's/;;$/;/g' $(git grep -E ';;$'  | grep "\.[ch]:"  | grep -vwE 'for|ia64' | cut -d: -f1 | sort | uniq)

... followed by manual review to make sure it's all good.

Splitting this up is just crazy talk, let's get over with this and just do it.

Reported-by: Pavel Machek <pavel@ucw.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-22 10:59:33 +01:00
Rick Chen ea4625c386 clocksource/drivers/atcpit100: VDSO support
VDSO needs real-time cycle count to ensure the time accuracy.
Unlike others, nds32 architecture does not define clock source,
hence VDSO needs atcpit100 offering real-time cycle count
to derive the correct time.

Signed-off-by: Vincent Chen <vincentc@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Signed-off-by: Greentime Hu <green.hu@gmail.com>
2018-02-22 10:44:36 +08:00
Rick Chen 35dbb74aa7 clocksource/drivers/atcpit100: Add andestech atcpit100 timer
ATCPIT100 is often used on the Andes architecture,
This timer provide 4 PIT channels. Each PIT channel is a
multi-function timer, can be configured as 32,16,8 bit timers
or PWM as well.

For system timer it will set channel 1 32-bit timer0 as clock
source and count downwards until underflow and restart again.

It also set channel 0 32-bit timer0 as clock event and count
downwards until condition match. It will generate an interrupt
for handling periodically.

Signed-off-by: Rick Chen <rickchen36@gmail.com>
Signed-off-by: Greentime Hu <green.hu@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Add andestech atcpit100 timer
2018-02-22 10:44:36 +08:00
Daniel Lezcano 103bb56a28 clocksource/drivers/stm32: Start the timer's counter sooner
As we have a lot of timers on this platform, we can have potentially all the
timers enabled in the DT, so we don't want to start the timer for every probe
otherwise they will be running for nothing as only one will be used.

Start the timer only when setting the mode or when the clocksource is
enabled.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-20-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:26 +01:00
Daniel Lezcano 81abdbbffd clocksource/drivers/stm32: Add the timer delay callback
Add the timer delay callback, that saves us ~90ms of boot time.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-19-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:26 +01:00
Benjamin Gaignard f5ef02bd0e clocksource/drivers/stm32: Add clocksource functionality
The scene is set for the clocksource functionality, let's add it for this driver.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-18-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:26 +01:00
Daniel Lezcano 3c84e75b1e clocksource/drivers/stm32: Factor out more of the clockevent code
In order to prepare the clocksource code, let's factor out the clockevent
code, split the prescaler and timer width code into separate functions.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-17-git-send-email-daniel.lezcano@linaro.org
[ Small edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:26 +01:00
Benjamin Gaignard 8e82df381b clocksource/drivers/stm32: Add oneshot mode
The stm32 timer block is able to have a counter and a comparator.

Instead of using the auto-reload register for periodic events, we switch
to oneshot mode by using the comparator register.

The timer is able to generate an interrupt when the counter overflows but
we don't want that as this counter will be use as a clocksource in the next
patches. So it is disabled by the UDIS bit of the control register.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-16-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:26 +01:00
Benjamin Gaignard 4744daa10d clocksource/drivers/stm32: Compute a prescaler value with a targeted rate
The prescaler value is arbitrarily set to 1024 without any regard to the
timer frequency. For 32-bit timers, there is no need to set a prescaler
value as they wrap in an acceptable interval and give the opportunity to
have precise timers on this platform. However, for 16-bit timers a prescaler
value is needed if we don't want to wrap too often per second which is
inefficient and adds more and more error margin. With a targeted clock
of 10MHz, the 16 bits are precise enough whatever the timer frequency is
as we will compute the prescaler.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-15-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:25 +01:00
Daniel Lezcano 70c62cf910 clocksource/drivers/stm32: Factor out the timer width sorting code
In order to clarify and encapsulate the code for upcoming changes, move the
timer width check into a function and add some documentation.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-14-git-send-email-daniel.lezcano@linaro.org
[ Spelling fixes. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:25 +01:00
Daniel Lezcano f2ed8ef1ce clocksource/drivers/stm32: Use the node name as timer name
As there are different timers on the stm32, use the node name for the timer
name in order to give the indication of which timer the kernel is using.

/proc/timer_list gives all the information with the right name, otherwise
we end up digging in the kernel log and /proc/interrupt to do the connection
between the used timer.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-13-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:25 +01:00
Benjamin Gaignard d04af4908a clocksource/drivers/stm32: Convert the driver to timer_of primitives
Convert the driver to use the timer_of() helpers. This allows the removal of
a custom private structure, factors out and simplifies the code.

[Daniel Lezcano]: Respin against the critical fix patch and massaged the changelog.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-12-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:25 +01:00
Daniel Lezcano e0aeca3d8c clocksource/drivers/stm32: Fix kernel panic with multiple timers
The current code hides a couple of bugs:

 - The global variable 'clock_event_ddata' is overwritten each time the
   init function is invoked.

This is fixed with a kmemdup() instead of assigning the global variable. That
prevents a memory corruption when several timers are defined in the DT.

 - The clockevent's event_handler is NULL if the time framework does
   not select the clockevent when registering it, this is fine but the init
   code generates in any case an interrupt leading to dereference this
   NULL pointer.

The stm32 timer works with shadow registers, a mechanism to cache the
registers. When a change is done in one buffered register, we need to
artificially generate an event to force the timer to copy the content
of the register to the shadowed register.

The auto-reload register (ARR) is one of the shadowed register as well as
the prescaler register (PSC), so in order to force the copy, we issue an
event which in turn leads to an interrupt and the NULL dereference.

This is fixed by inverting two lines where we clear the status register
before enabling the update event interrupt.

As this kernel crash is resulting from the combination of these two bugs,
the fixes are grouped into a single patch.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1515418139-23276-11-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:25 +01:00
Daniel Lezcano 9aea417afa clocksource/drivers/timer-of: Don't request the resource by name
When the driver does not specify a name for the resource, don't use
of_io_request_and_map() but of_iomap(). That prevents resource name allocation
conflicts on some platforms which have the same name as the node.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-10-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:24 +01:00
Daniel Lezcano 1c63c1c089 clocksource/drivers/timer-of: Store the device node pointer in 'struct timer_of'
Under certain circumstances, some specific operations must be done with the
device node pointer, which forces the timer code to propagate the pointer to
the functions which need it.

In order to consolidate the function signatures in the different drivers
by using the timer-of structure, let's store it in the timer-of structure
as a handy pointer when it is needed.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-9-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:24 +01:00
Baolin Wang 067bc91447 clocksource/drivers/spreadtrum: Add timer driver for the Spreadtrum SC9860 platform
The Spreadtrum SC9860 platform will use the architected timers as local
clock events, but we also need a broadcast timer device to wake up the
CPUs when the CPUs are in sleep mode.

The Spreadtrum timer can support 32-bit or 64-bit counters, as well as
supporting period mode or one-shot mode.

Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-8-git-send-email-daniel.lezcano@linaro.org
[ Minor readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:24 +01:00
Daniel Lezcano cf7f46b9b1 clocksource/drivers/timer-of: Add kernel documentation
The current code has no comments, neither any function descriptions. Fix this by
adding function descriptions in kernel doc format.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-6-git-send-email-daniel.lezcano@linaro.org
[ Spelling and style fixes. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:23 +01:00
Daniel Lezcano 5bbf4ad945 clocksource/drivers/timer-of: Fix function names
All the functions are not prefixed with 'timer_of_', fix the naming in order
to have the code consistent.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-5-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:23 +01:00
Romain Izard 542f824607 clocksource/drivers/tcb_clksrc: Fix clock speed message
The clock speed displayed at boot in an information message was 500 kHz
too high compared to its real value. As the value is not used anywhere,
there is no functional impact.

Fix the rounding formula to display the correct value.

Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-4-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:23 +01:00
Andreas Färber 0ec5477c3e clocksource/drivers/owl: Add the S700 timer
Actions S700 has two 2Hz timers like S500, and four TIMx timers like S900.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-3-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:23 +01:00
Andreas Färber f58639ac29 clocksource/drivers/owl: Adopt TIMER_OF_DECLARE()
The following commit:

  1727339590 ("clocksource/drivers: Rename CLOCKSOURCE_OF_DECLARE to TIMER_OF_DECLARE")

deprecated CLOCKSOURCE_OF_DECLARE(), so adopt the new TIMER_OF_DECLARE() macro instead.

Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-2-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:23 +01:00
Thomas Gleixner 866c9b94ef - final batch of "non trivial" timer conversions (multi-tree dependencies,
things Coccinelle couldn't handle, etc).
 - treewide conversions via Coccinelle, in 4 steps:
   - DEFINE_TIMER() functions converted to struct timer_list * argument
   - init_timer() -> setup_timer()
   - setup_timer() -> timer_setup()
   - setup_timer() -> timer_setup() (with a single embedded structure)
 - deprecated timer API removals (init_timer(), setup_*timer())
 - finalization of new API (remove global casts)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 Comment: Kees Cook <kees@outflux.net>
 
 iQIcBAABCgAGBQJaFMcSAAoJEIly9N/cbcAmsToQAIrAIWJIj/buzoXgvsesBWE0
 B+l7fZr4q0xwx7gU1FEBcNu3MTJz3GQgpfSD5x5HhXX4vxwVQJWnYIkQvvM2YjVG
 d/wgwqPu24hIyU2i3WX584K+r7uwhN85eL8CN/YB264bTnMc+aZAIOqY2jwLRr1u
 uSa7JNCyjEpENIiZ3zWgojGu/izCoW4KBzKOpWWqrfrfGgmx+ImFlLgneSmgOhg4
 9y1pqqifYbMx313ZWfln4XVdiQwuqG7weE6oPZ7j9ypM4UX1lQUG+SdZmYYvBHcV
 /LopB7zGwbbCoUDwzDTz4a/xYobteXaqEkFlwFAqsGtjqvYks+n0IKgzcKRvOF6R
 O9j4lWPK87B1uIKtkO/W0bJs5KA1w273U+mUvjEH+fTyjvpAJLkMzpEP3NxM3BJ4
 ilYXNNvfFaT3lslOhyaces54Q2eAVzodL4zcaeKfPKxrdv0V58nOYKUqFpIKBp7n
 JKcZm58xTiLcpqT/Zg31in83kBMg499LAorjvY1y68GjFtXQ0YBNA4EaxDZD4z56
 /N2tQarAu7xmo1VTSM+NVDY4X5H122XINIcpPRQ/qEF9usQDoBY1N8vusUis05R9
 IKvn+cpS20dLYyPZUgV5zHx+HNjIxUoANiQTHRLI7HvADUDXCcMXM4CZoKdCWXNG
 cf6CGbhH9hOIAQpUD154
 =Tj+I
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-timers-conversion-final-v4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into timers/urgent

Pull the last batch of manual timer conversions from Kees Cook:

 - final batch of "non trivial" timer conversions (multi-tree dependencies,
   things Coccinelle couldn't handle, etc).

 - treewide conversions via Coccinelle, in 4 steps:
   - DEFINE_TIMER() functions converted to struct timer_list * argument
   - init_timer() -> setup_timer()
   - setup_timer() -> timer_setup()
   - setup_timer() -> timer_setup() (with a single embedded structure)

 - deprecated timer API removals (init_timer(), setup_*timer())

 - finalization of new API (remove global casts)
2017-11-23 16:29:05 +01:00
Linus Torvalds 974aa5630b First batch of KVM changes for 4.15
Common:
  - Python 3 support in kvm_stat
 
  - Accounting of slabs to kmemcg
 
 ARM:
  - Optimized arch timer handling for KVM/ARM
 
  - Improvements to the VGIC ITS code and introduction of an ITS reset
    ioctl
 
  - Unification of the 32-bit fault injection logic
 
  - More exact external abort matching logic
 
 PPC:
  - Support for running hashed page table (HPT) MMU mode on a host that
    is using the radix MMU mode;  single threaded mode on POWER 9 is
    added as a pre-requisite
 
  - Resolution of merge conflicts with the last second 4.14 HPT fixes
 
  - Fixes and cleanups
 
 s390:
  - Some initial preparation patches for exitless interrupts and crypto
 
  - New capability for AIS migration
 
  - Fixes
 
 x86:
  - Improved emulation of LAPIC timer mode changes, MCi_STATUS MSRs, and
    after-reset state
 
  - Refined dependencies for VMX features
 
  - Fixes for nested SMI injection
 
  - A lot of cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABCAAGBQJaDayXAAoJEED/6hsPKofo/3UH/3HvlcHt+ADTkCU1/iiKAs+i
 0zngIOXIxgHDnV0ww6bV+Znww0BzTYgKCAXX76z603jdpDwG/pzQQcbLDF5ZoJnD
 sQtF10gZinWaRsHlfbLqjrHGL2pGDHO1UKBKLJ0bAIyORPZBxs7i+VmrY/blnr9c
 0wsybJ8RbvwAxjsDL5jeX/z4NehPupmKUc4Lf0eZdSHwVOf9sjn+MP6jJ0r2JcIb
 D+zddPBiLStzN97t4gZpQsrlj3LKrDS+6hY+1TjSvlh+yHKFVFh58VhLm4DuDeb5
 bYOAlWJ/gAWEzfvr5Ld+Nd7SqWWn/14logPkQ4gcU4BI/neAOzk4c6hJfCHl1nk=
 =593n
 -----END PGP SIGNATURE-----

Merge tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Radim Krčmář:
 "First batch of KVM changes for 4.15

  Common:
   - Python 3 support in kvm_stat
   - Accounting of slabs to kmemcg

  ARM:
   - Optimized arch timer handling for KVM/ARM
   - Improvements to the VGIC ITS code and introduction of an ITS reset
     ioctl
   - Unification of the 32-bit fault injection logic
   - More exact external abort matching logic

  PPC:
   - Support for running hashed page table (HPT) MMU mode on a host that
     is using the radix MMU mode; single threaded mode on POWER 9 is
     added as a pre-requisite
   - Resolution of merge conflicts with the last second 4.14 HPT fixes
   - Fixes and cleanups

  s390:
   - Some initial preparation patches for exitless interrupts and crypto
   - New capability for AIS migration
   - Fixes

  x86:
   - Improved emulation of LAPIC timer mode changes, MCi_STATUS MSRs,
     and after-reset state
   - Refined dependencies for VMX features
   - Fixes for nested SMI injection
   - A lot of cleanups"

* tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (89 commits)
  KVM: s390: provide a capability for AIS state migration
  KVM: s390: clear_io_irq() requests are not expected for adapter interrupts
  KVM: s390: abstract conversion between isc and enum irq_types
  KVM: s390: vsie: use common code functions for pinning
  KVM: s390: SIE considerations for AP Queue virtualization
  KVM: s390: document memory ordering for kvm_s390_vcpu_wakeup
  KVM: PPC: Book3S HV: Cosmetic post-merge cleanups
  KVM: arm/arm64: fix the incompatible matching for external abort
  KVM: arm/arm64: Unify 32bit fault injection
  KVM: arm/arm64: vgic-its: Implement KVM_DEV_ARM_ITS_CTRL_RESET
  KVM: arm/arm64: Document KVM_DEV_ARM_ITS_CTRL_RESET
  KVM: arm/arm64: vgic-its: Free caches when GITS_BASER Valid bit is cleared
  KVM: arm/arm64: vgic-its: New helper functions to free the caches
  KVM: arm/arm64: vgic-its: Remove kvm_its_unmap_device
  arm/arm64: KVM: Load the timer state when enabling the timer
  KVM: arm/arm64: Rework kvm_timer_should_fire
  KVM: arm/arm64: Get rid of kvm_timer_flush_hwstate
  KVM: arm/arm64: Avoid phys timer emulation in vcpu entry/exit
  KVM: arm/arm64: Move phys_timer_emulate function
  KVM: arm/arm64: Use kvm_arm_timer_set/get_reg for guest register traps
  ...
2017-11-16 13:00:24 -08:00
Linus Torvalds c9b012e5f4 arm64 updates for 4.15
Plenty of acronym soup here:
 
 - Initial support for the Scalable Vector Extension (SVE)
 - Improved handling for SError interrupts (required to handle RAS events)
 - Enable GCC support for 128-bit integer types
 - Remove kernel text addresses from backtraces and register dumps
 - Use of WFE to implement long delay()s
 - ACPI IORT updates from Lorenzo Pieralisi
 - Perf PMU driver for the Statistical Profiling Extension (SPE)
 - Perf PMU driver for Hisilicon's system PMUs
 - Misc cleanups and non-critical fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCgAGBQJaCcLqAAoJELescNyEwWM0JREH/2FbmD/khGzEtP8LW+o9D8iV
 TBM02uWQxS1bbO1pV2vb+512YQO+iWfeQwJH9Jv2FZcrMvFv7uGRnYgAnJuXNGrl
 W+LL6OhN22A24LSawC437RU3Xe7GqrtONIY/yLeJBPablfcDGzPK1eHRA0pUzcyX
 VlyDruSHWX44VGBPV6JRd3x0vxpV8syeKOjbRvopRfn3Nwkbd76V3YSfEgwoTG5W
 ET1sOnXLmHHdeifn/l1Am5FX1FYstpcd7usUTJ4Oto8y7e09tw3bGJCD0aMJ3vow
 v1pCUWohEw7fHqoPc9rTrc1QEnkdML4vjJvMPUzwyTfPrN+7uEuMIEeJierW+qE=
 =0qrg
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
 "The big highlight is support for the Scalable Vector Extension (SVE)
  which required extensive ABI work to ensure we don't break existing
  applications by blowing away their signal stack with the rather large
  new vector context (<= 2 kbit per vector register). There's further
  work to be done optimising things like exception return, but the ABI
  is solid now.

  Much of the line count comes from some new PMU drivers we have, but
  they're pretty self-contained and I suspect we'll have more of them in
  future.

  Plenty of acronym soup here:

   - initial support for the Scalable Vector Extension (SVE)

   - improved handling for SError interrupts (required to handle RAS
     events)

   - enable GCC support for 128-bit integer types

   - remove kernel text addresses from backtraces and register dumps

   - use of WFE to implement long delay()s

   - ACPI IORT updates from Lorenzo Pieralisi

   - perf PMU driver for the Statistical Profiling Extension (SPE)

   - perf PMU driver for Hisilicon's system PMUs

   - misc cleanups and non-critical fixes"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (97 commits)
  arm64: Make ARMV8_DEPRECATED depend on SYSCTL
  arm64: Implement __lshrti3 library function
  arm64: support __int128 on gcc 5+
  arm64/sve: Add documentation
  arm64/sve: Detect SVE and activate runtime support
  arm64/sve: KVM: Hide SVE from CPU features exposed to guests
  arm64/sve: KVM: Treat guest SVE use as undefined instruction execution
  arm64/sve: KVM: Prevent guests from using SVE
  arm64/sve: Add sysctl to set the default vector length for new processes
  arm64/sve: Add prctl controls for userspace vector length management
  arm64/sve: ptrace and ELF coredump support
  arm64/sve: Preserve SVE registers around EFI runtime service calls
  arm64/sve: Preserve SVE registers around kernel-mode NEON use
  arm64/sve: Probe SVE capabilities and usable vector lengths
  arm64: cpufeature: Move sys_caps_initialised declarations
  arm64/sve: Backend logic for setting the vector length
  arm64/sve: Signal handling support
  arm64/sve: Support vector length resetting for new processes
  arm64/sve: Core task context handling
  arm64/sve: Low-level CPU setup
  ...
2017-11-15 10:56:56 -08:00
Benjamin Gaignard 558de28249 clocksource/timer_of: Rename timer_of_exit to timer_of_cleanup
Change the function name to something more explicit since it is only used
in init error cases.

Add __init annotation and description about the function usage.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: mark.rutland@arm.com
Cc: devicetree@vger.kernel.org
Cc: alexandre.torgue@st.com
Cc: arnd@arndb.de
Cc: julien.thierry@arm.com
Cc: daniel.lezcano@linaro.org
Cc: linux@armlinux.org.uk
Cc: robh+dt@kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: mcoquelin.stm32@gmail.com
Cc: sudeep.holla@arm.com
Cc: ludovic.barre@st.com
Link: https://lkml.kernel.org/r/1510649563-22975-2-git-send-email-benjamin.gaignard@linaro.org
2017-11-14 11:20:24 +01:00
Linus Torvalds 2bcc673101 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
 "Yet another big pile of changes:

   - More year 2038 work from Arnd slowly reaching the point where we
     need to think about the syscalls themself.

   - A new timer function which allows to conditionally (re)arm a timer
     only when it's either not running or the new expiry time is sooner
     than the armed expiry time. This allows to use a single timer for
     multiple timeout requirements w/o caring about the first expiry
     time at the call site.

   - A new NMI safe accessor to clock real time for the printk timestamp
     work. Can be used by tracing, perf as well if required.

   - A large number of timer setup conversions from Kees which got
     collected here because either maintainers requested so or they
     simply got ignored. As Kees pointed out already there are a few
     trivial merge conflicts and some redundant commits which was
     unavoidable due to the size of this conversion effort.

   - Avoid a redundant iteration in the timer wheel softirq processing.

   - Provide a mechanism to treat RTC implementations depending on their
     hardware properties, i.e. don't inflict the write at the 0.5
     seconds boundary which originates from the PC CMOS RTC to all RTCs.
     No functional change as drivers need to be updated separately.

   - The usual small updates to core code clocksource drivers. Nothing
     really exciting"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
  timers: Add a function to start/reduce a timer
  pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
  timer: Prepare to change all DEFINE_TIMER() callbacks
  netfilter: ipvs: Convert timers to use timer_setup()
  scsi: qla2xxx: Convert timers to use timer_setup()
  block/aoe: discover_timer: Convert timers to use timer_setup()
  ide: Convert timers to use timer_setup()
  drbd: Convert timers to use timer_setup()
  mailbox: Convert timers to use timer_setup()
  crypto: Convert timers to use timer_setup()
  drivers/pcmcia: omap1: Fix error in automated timer conversion
  ARM: footbridge: Fix typo in timer conversion
  drivers/sgi-xp: Convert timers to use timer_setup()
  drivers/pcmcia: Convert timers to use timer_setup()
  drivers/memstick: Convert timers to use timer_setup()
  drivers/macintosh: Convert timers to use timer_setup()
  hwrng/xgene-rng: Convert timers to use timer_setup()
  auxdisplay: Convert timers to use timer_setup()
  sparc/led: Convert timers to use timer_setup()
  mips: ip22/32: Convert timers to use timer_setup()
  ...
2017-11-13 17:56:58 -08:00
Ingo Molnar 8c5db92a70 Merge branch 'linus' into locking/core, to resolve conflicts
Conflicts:
	include/linux/compiler-clang.h
	include/linux/compiler-gcc.h
	include/linux/compiler-intel.h
	include/uapi/linux/stddef.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-07 10:32:44 +01:00
Christoffer Dall e6d68b00e9 arm64: Use physical counter for in-kernel reads when booted in EL2
Using the physical counter allows KVM to retain the offset between the
virtual and physical counter as long as it is actively running a VCPU.

As soon as a VCPU is released, another thread is scheduled or we start
running userspace applications, we reset the offset to 0, so that
userspace accessing the virtual timer can still read the virtual counter
and get the same view of time as the kernel.

This opens up potential improvements for KVM performance, but we have to
make a few adjustments to preserve system consistency.

Currently get_cycles() is hardwired to arch_counter_get_cntvct() on
arm64, but as we move to using the physical timer for the in-kernel
time-keeping on systems that boot in EL2, we should use the same counter
for get_cycles() as for other in-kernel timekeeping operations.

Similarly, implementations of arch_timer_set_next_event_phys() is
modified to use the counter specific to the timer being programmed.

VHE kernels or kernels continuing to use the virtual timer are
unaffected.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-11-06 16:23:09 +01:00