Commit Graph

9 Commits

Author SHA1 Message Date
Nicholas Bellinger 676687c696 iscsi-target: Convert gfp_t parameter to task state bitmask
This patch propigates the use of task state bitmask now used by
percpu_ida_alloc() up the iscsi-target callchain, replacing the
use of GFP_ATOMIC for TASK_RUNNING, and GFP_KERNEL for
TASK_INTERRUPTIBLE.

Also, drop the unnecessary gfp_t parameter to isert_allocate_cmd(),
and just pass TASK_INTERRUPTIBLE into iscsit_allocate_cmd().

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-25 06:58:52 +00:00
Nicholas Bellinger d703ce2f7f iscsi/iser-target: Convert to command priv_size usage
This command converts iscsi/isert-target to use allocations based on
iscsit_transport->priv_size within iscsit_allocate_cmd(), instead of
using an embedded isert_cmd->iscsi_cmd.

This includes removing iscsit_transport->alloc_cmd() usage, along
with updating isert-target code to use iscsit_priv_cmd().

Also, remove left-over iscsit_transport->release_cmd() usage for
direct calls to iscsit_release_cmd(), and drop the now unused
lio_cmd_cache and isert_cmd_cache.

Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-09-09 14:29:21 -07:00
Nicholas Bellinger b2cb96494d iser-target: Fix session reset bug with RDMA_CM_EVENT_DISCONNECTED
This patch addresses a bug where RDMA_CM_EVENT_DISCONNECTED may occur
before the connection shutdown has been completed by rx/tx threads,
that causes isert_free_conn() to wait indefinately on ->conn_wait.

This patch allows isert_disconnect_work code to invoke rdma_disconnect
when isert_disconnect_work() process context is started by client
session reset before isert_free_conn() code has been reached.

It also adds isert_conn->conn_mutex protection for ->state within
isert_disconnect_work(), isert_cq_comp_err() and isert_free_conn()
code, along with isert_check_state() for wait_event usage.

(v2: Add explicit iscsit_cause_connection_reinstatement call
     during isert_disconnect_work() to force conn reset)

Cc: stable@vger.kernel.org  # 3.10+
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-07 18:35:56 -07:00
Nicholas Bellinger 561bf15892 iscsi-target: Fix iscsit_sequence_cmd reject handling for iser
This patch moves ISCSI_OP_REJECT failures into iscsit_sequence_cmd()
in order to avoid external iscsit_reject_cmd() reject usage for all
PDU types.

It also updates PDU specific handlers for traditional iscsi-target
code to not reset the session after posting a ISCSI_OP_REJECT during
setup.

(v2: Fix CMDSN_LOWER_THAN_EXP for ISCSI_OP_SCSI to call
     target_put_sess_cmd() after iscsit_sequence_cmd() failure)

Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: stable@vger.kernel.org  # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-06 21:59:54 -07:00
Nicholas Bellinger ba15991408 iscsi-target: Fix iscsit_add_reject* usage for iser
This patch changes iscsit_add_reject() + iscsit_add_reject_from_cmd()
usage to not sleep on iscsi_cmd->reject_comp to address a free-after-use
usage bug in v3.10 with iser-target code.

It saves ->reject_reason for use within iscsit_build_reject() so the
correct value for both transport cases.  It also drops the legacy
fail_conn parameter usage throughput iscsi-target code and adds
two iscsit_add_reject_cmd() and iscsit_reject_cmd helper functions,
along with various small cleanups.

(v2: Re-enable target_put_sess_cmd() to be called from
     iscsit_add_reject_from_cmd() for rejects invoked after
     target_get_sess_cmd() has been called)

Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: stable@vger.kernel.org  # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-06 21:59:53 -07:00
Nicholas Bellinger 889c8a68b8 iscsi-target: Refactor ISCSI_OP_TEXT_RSP TX handling
This patch refactoring existing iscsit_send_text_rsp() in order
to handle iscsi_text_rsp payloads in a transport specific manner.

This includes the addition of iscsit_build_text_rsp() to build
the response payload and initialize ISCSI_OP_TEXT_RSP.

v2: Make iscsit_build_text_rsp() determine extra padding bytes, and
    drop legacy padding calculation for traditional iSCSI text
    responses within iscsit_send_text_rsp()

Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-26 00:33:32 -07:00
Nicholas Bellinger 64534aa794 iscsi-target: Refactor ISCSI_OP_TEXT RX handling
This patch refactors ISCSI_OP_TEXT handling within iscsi-target in
order to handle iscsi_text payloads in a transport specific manner.

This includes splitting current iscsit_handle_text_cmd() into
iscsit_setup_text_cmd() and iscsit_process_text_cmd() calls, and
makes iscsit_handle_text_cmd be only used internally by traditional
iscsi socket calls.

Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-24 22:36:29 -07:00
Nicholas Bellinger 778de36896 iscsi/isert-target: Refactor ISCSI_OP_NOOP RX handling
This patch refactors ISCSI_OP_NOOP handling within iscsi-target in
order to handle iscsi_nopout payloads in a transport specific manner.

This includes splitting existing iscsit_handle_nop_out() into
iscsit_setup_nop_out() and iscsit_process_nop_out() calls, and
makes iscsit_handle_nop_out() be only used internally by traditional
iscsi socket calls.

Next update iser-target code to use new callers and add FIXME for
the handling iscsi_nopout payloads.  Also fix reject response handling
in iscsit_setup_nop_out() to use proper iscsit_add_reject_from_cmd().

v2: Fix uninitialized iscsit_handle_nop_out() payload_length usage (Fengguang)
v3: Remove left-over dead code in iscsit_setup_nop_out() (DanC)

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-24 22:35:51 -07:00
Nicholas Bellinger 3f99306337 iscsi-target: Add iscsit_transport API template
Add basic struct iscsit_transport API template to allow iscsi-target for
running with external transport modules using existing iscsi_target_core.h
code.

For all external modules, this calls try_module_get() and module_put()
to obtain + release an external iscsit_transport module reference count.

Also include the iscsi-target symbols necessary in iscsi_transport.h to
allow external transport modules to function.

v3 changes:
- Add iscsit_build_reject export for ISTATE_SEND_REJECT usage

v2 changes:

- Drop unnecessary export of iscsit_get_transport + iscsit_put_transport (roland)
- Add ->iscsit_queue_data_in() to remove extra context switch on RDMA_WRITE
- Add ->iscsit_queue_status() to remove extra context switch on IB_SEND status
- Add ->iscsit_get_dataout() to remove extra context switch on RDMA_READ
- Drop ->iscsit_free_cmd()
- Drop ->iscsit_unmap_cmd()
- Rename iscsit_create_transport() -> iscsit_register_transport() (andy)
- Rename iscsit_destroy_transport() -> iscsit_unregister_transport() (andy)

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25 01:05:26 -07:00