Commit Graph

89 Commits

Author SHA1 Message Date
Jesper Juhl 226e01ef0d ALSA: emu8000: Remove duplicate linux/moduleparam.h include from emu8000_patch.c
The header 'linux/moduleparam.h' is included twice in
'sound/isa/sb/emu8000_patch.c'. Once is enough.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-06 10:22:54 +01:00
Rusty Russell a67ff6a540 ALSA: module_param: make bool parameters really bool
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-19 10:34:41 +01:00
Paul Gortmaker d81a6d7176 sound: Add export.h for THIS_MODULE/EXPORT_SYMBOL where needed
These aren't modules, but they do make use of these macros, so
they will need export.h to get that definition.  Previously,
they got it via the implicit module.h inclusion.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:22 -04:00
Paul Gortmaker da155d5b40 sound: Add module.h to the previously silent sound users
Lots of sound drivers were getting module.h via the implicit presence
of it in <linux/device.h> but we are going to clean that up.  So
fix up those users now.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:21 -04:00
Paul Gortmaker 31623caaf0 sound: add moduleparam.h to users of module_param/MODULE_PARM_DESC
These files were getting access to these two via the implicit
presence of moduleparam.h everywhere.  But that is being fixed, so
get these guys what they need in advance.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:20 -04:00
Paul Gortmaker 65a772172b sound: fix drivers needing module.h not moduleparam.h
The implicit presence of module.h lured several users into
incorrectly thinking that they only needed/used modparam.h
but once we clean up the module.h presence, these will show
up as build failures, so fix 'em now.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:19 -04:00
Yong Zhang 88e24c3a4b sound: irq: Remove IRQF_DISABLED
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled],
We run all interrupt handlers with interrupts disabled
and we even check and yell when an interrupt handler
returns with interrupts enabled (see commit [b738a50a:
genirq: Warn when handler enables interrupts]).

So now this flag is a NOOP and can be removed.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-22 11:19:20 +02:00
Clemens Ladisch dba8b46992 ALSA: mpu401: clean up interrupt specification
The semantics of snd_mpu401_uart_new()'s interrupt parameters are
somewhat counterintuitive:  To prevent the function from allocating its
own interrupt, either the irq number must be invalid, or the irq_flags
parameter must be zero.  At the same time, the irq parameter being
invalid specifies that the mpu401 code has to work without an interrupt
allocated by the caller.  This implies that, if there is an interrupt
and it is allocated by the caller, the irq parameter must be set to
a valid-looking number which then isn't actually used.

With the removal of IRQF_DISABLED, zero becomes a valid irq_flags value,
which forces us to handle the parameters differently.

This patch introduces a new flag MPU401_INFO_IRQ_HOOK for when the
device interrupt is handled by the caller, and makes the allocation of
the interrupt to depend only on the irq parameter.  As suggested by
Takashi, the irq_flags parameter was dropped because, when used, it had
the constant value IRQF_DISABLED.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-14 11:00:51 +02:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Joe Perches 9fe856e47e sound: Remove unnecessary casts of private_data
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-07 08:05:59 +02:00
Kulikov Vasiliy 5157cc8113 ALSA: sb: check get_user() return value
get_user() may fail, if so return -EFAULT.

[Fixed one missing place by tiwai]

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-29 12:24:22 +02:00
Krzysztof Helt a20971b201 ALSA: Merge es1688 and es968 drivers
The ESS ES968 chip is nothing more then a PnP companion
for a non-PnP audio chip. It was paired with non-PnP ESS' chips:
ES688 and ES1688. The ESS' audio chips are handled by the es1688
driver in native mode. The PnP cards are handled by the ES968
driver in SB compatible mode.

Move the ES968 chip handling to the es1688 driver so the driver
can handle both PnP and non-PnP cards. The es968 is removed.

Also, a new PnP id is added for the card I acquired (the change
was tested on this card).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-10 09:49:30 +02:00
Krzysztof Helt 867f1845c5 ALSA: es968: fix wrong PnP dma index
There is only one dma for the ESS ES968 based board.
Its index is 0 and not 1.

This make the es968 card working.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-04-26 09:05:44 +02:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Meelis Roos 50152dfaa7 ALSA: fix jazz16 compile (udelay)
While trying to compile jazz16 isa sound driver on alpha (2.6.33+git), I
found a compile failure in jazz16.c (udelay is unknown). Fix it by
including delay.h.

Signed-foo-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-05 08:13:20 +01:00
Jaroslav Kysela b8f1f5983f Merge branch 'topic/misc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into devel 2010-02-16 11:25:03 +01:00
Krzysztof Helt edf12b4af6 sbawe: fix memory detection part 2
The patch "sbawe: fix memory detection" fixed detection
for memoryless SB32 cards but broke detection of memory
above 512KB. This patch fixes the regression.

The patch has been tested on the SB32 card (CT3670) with
0MB, 2MB and 8MB memory installed.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-08 09:27:23 +01:00
Krzysztof Helt 44eba3e82b ALSA: jazz16: refine dma and irq selection
Narrow the dma and irq selection after the DOS driver.

Add ALSA configuration description as well.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-25 14:15:41 +01:00
Takashi Iwai cb3b04debb Merge branch 'fix/misc' into topic/misc 2009-12-22 07:57:54 +01:00
Krzysztof Helt ad8decb7f5 ALSA: jazz16: Add support for Media Vision Jazz16 chipset
This is one of Sound Blaster Pro compatible chipsets which is supported
by Linux OSS driver and was missing native supoort for ALSA.

The Jazz16 audio codec is Crystal CS4216 which is capable
of playback and recording up to 48 kHz stereo.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-21 12:09:22 +01:00
Krzysztof Helt db8cf334f6 ALSA: sbawe: fix memory detection
Memory amount is increased before a successful write-read
sequence is done. Thus, 512 kB of onboard memory is detected
on memoryless cards like SB32.

Move the increasing of memory counter after successful read
is done.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-21 12:03:11 +01:00
Krzysztof Helt 74c2b45b71 ALSA: sb_mixer: convert pointer tables to mixer control tables
Convert table of pointers to mixer controls into tables
of the mixer controls. It saves about 20% of the snd-sb-common
module size reported by lsmod.

The als4000 uses part of sb16's control table.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-14 11:22:25 +01:00
Jaroslav Kysela d355c82a01 ALSA: rename "PC Speaker" and "PC Beep" controls to "Beep"
To avoid confusion in control names for the standard analog PC Beep generator
using a small Internal PC Speaker, rename all related "PC Speaker" and "PC
Beep" controls to "Beep" only. This name is more universal and can be also
used on more platforms without confusion.

Introduce also "Internal Speaker" in ControlNames.txt for systems with
full-featured build-in internal speaker.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-05 09:00:18 +01:00
Michal Marek 0528c7494e ALSA: clean up the logic for building sequencer modules
Instead of mangling the CONFIG_* variables in the makefiles over and
over, set a few helper variables in Kconfig.

Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-29 11:49:42 +02:00
Li Zefan 68425adcc4 ALSA: sound/isa: use memdup_user()
Remove open-coded memdup_user().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-14 12:39:23 +02:00
Takashi Iwai fa15fdeffa Merge branch 'topic/isa-misc' into for-linus 2009-03-24 00:36:13 +01:00
Andreas Mohr ce71bfd1aa ALSA: ALS4000, slight mixer improvements
- add 8kHz / 20 kHz low-pass filter switch control
- add ALS4000 Mono capture route control
- add annotations to specs pages
- improve ALS4000 PM saved regs selection (remove SB dummy register,
  add missing ones)
- add some missing ALS4000 register defines
- constify two variables

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-23 07:47:52 +01:00
Takashi Iwai 3e7fb9f7ec ALSA: Return proper error code at probe in sound/isa/*
Some drivers in sound/isa/* don't handle the error code properly
from snd_card_create().  This patch fixes these places.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-12 15:21:54 +01:00
Takashi Iwai c95eadd2f1 ALSA: Convert to snd_card_create() in sound/isa/*
Convert from snd_card_new() to the new snd_card_create() function.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-12 15:20:26 +01:00
Takashi Iwai 42a73df435 ALSA: sb8 - Fix a return code in the error path
Fixed a compile warning below:
  sound/isa/sb/sb8.c: In function ‘snd_sb8_probe’:
  sound/isa/sb/sb8.c:104: warning: ‘err’ may be used uninitialized in this function
by setting the return value correctly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-11 12:12:06 +01:00
Takashi Iwai 0418ff0c8e ALSA: remove direct access of dev->bus_id in sound/isa/*
Removed the direct accesses of dev->bus_id in sound/isa/* by replacement
with dev_err() or dev_warn() functions.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-03 08:57:40 +01:00
Takashi Iwai 622207dc31 ALSA: Kill snd_assert() in sound/isa/*
Kill snd_assert() in sound/isa/*, either removed or replaced with
if () with snd_BUG_ON().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13 11:46:36 +02:00
David Woodhouse 751851af7a Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
Conflicts:

	sound/pci/Kconfig
2008-07-14 15:51:11 -07:00
Jaswinder Singh d71792ac3d firmware: convert sb16_csp driver to use firmware loader exclusively
Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-14 14:45:46 -07:00
Takashi Iwai 3e14b50dd4 ALSA: sb - Fix wrong assertions
snd_assert() in save_mixer() and restore_mixer() in sb_mixer.c is
just wrong.  The debug code wasn't tested at all, obviously...

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-23 12:06:23 +02:00
Takashi Iwai 2621f0338c [ALSA] trivial clean up of sound/isa/sb/Makefile
Remove unneeded sort in sound/isa/sb/Makefile.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-30 11:27:24 +02:00
Harvey Harrison 9bf8e7ddea [ALSA] sound: replace remaining __FUNCTION__ occurences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:20 +02:00
Clemens Ladisch 20cde9e8f8 [ALSA] sb8: fix SB 1.0 capture DMA programming
Fix a wrong version check that would cause an invalid command to be sent
to SB 1.0 chips.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-02-29 11:28:15 +01:00
Takashi Iwai 9004acc70e [ALSA] Remove sound/driver.h
This header file exists only for some hacks to adapt alsa-driver
tree.  It's useless for building in the kernel.  Let's move a few
lines in it to sound/core.h and remove it.
With this patch, sound/driver.h isn't removed but has just a single
compile warning to include it.  This should be really killed in
future.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:48 +01:00
Takashi Iwai cd0b4ac839 [ALSA] sb16 - Suppress compile warning
sound/isa/sb/sb16_csp.c: In function ‘snd_sb_csp_new’:
sound/isa/sb/sb16_csp.c:121: warning: ‘version’ may be used uninitialized in this function

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:34 +01:00
Rene Herman 109c53f840 [ALSA] sound/isa: kill pnp_resource_change
This removes the pnp_resource_change use from the ALSA ISAPnP drivers. In
2.4 these were useful in providing an easy path to setting the resources,
but in 2.6 they retain function as a layering violation only.
This makes for a nice cleanup (-550 lines) of ALSA but moreover, ALSA is the
only remaining user of pnp_init_resource_table(), pnp_resource_change() and
pnp_manual_config_dev() (and, in fact, of 'struct pnp_resource_table') in
the tree outide of drivers/pnp itself meaning it makes for more cleanup
potential inside the PnP layer.
Thomas Renninger acked their removal from that side, you did from the ALSA
side (CC list just copied from that thread).
Against current alsa-kernel HG. Many more potential cleanups in there, but
this _only_ removes the pnp_resource_change code. Compile tested against
current alsa-kernel HG and compile- and use-tested against 2.6.23.x (few
offsets).
Cc: Thomas Renninger <trenn@suse.de>

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:30 +01:00
Jaroslav Kysela c1017a4cdb [ALSA] Changed Jaroslav Kysela's e-mail from perex@suse.cz to perex@perex.cz
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 16:51:18 +02:00
Takashi Iwai 2d4a485b3d [ALSA] Allow shared IRQ for CS5530 device
CS5530 is a PCI device and often shares the IRQ although the SB common
routine tries to allocate it exclusively.  This patch allows shared IRQ
for CS5530.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:59:32 +02:00
Takashi Iwai a5ce88909d [ALSA] Clean up with common snd_ctl_boolean_*_info callbacks
Clean up codes using the new common snd_ctl_boolean_*_info() callbacks.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:57:45 +02:00
Takashi Iwai dda369cf20 [ALSA] Fix SB-module dependency with PCI drivers
A few PCI drivers like ALS4000 and CS5530 require the SB16-codes.
This patch fixes / improves the dependency between SB modules and
PCI drivers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-07-20 11:11:21 +02:00
Takashi Iwai 621887aee9 [ALSA] Add support for Cyrix/NatSemi Geode CS5530 (VSA1)
Add support for Cyrix/NatSemi Geode SC5530 (VSA1).
The driver is snd-cs5530.
Signed-off-by Ash Willis <ashwillis@programmer.net>

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-07-20 11:11:19 +02:00
Rene Herman 609d769415 [ALSA] Fix probe of non-PnP ISA devices
isa_register_driver() returns an error if no device is found
and it's no fatal error for the drivers with pnp support.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-16 12:22:44 +02:00
Clemens Ladisch 7e0af29d6f [ALSA] add MODULE_FIRMWARE entries
Add MODULE_FIRMWARE() entries, where appropriate.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11 16:56:14 +02:00
Takashi Iwai b7dd2b349a [ALSA] Don't use request_firmware if internal firmwares are defined
Don't use request_firmware() if the internal firmwares are defined
via Kconfig.  Otherwise it results in a significant delay at loading
time (minutes).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11 16:56:11 +02:00
Rene Herman 83c51c0ab0 [ALSA] isa_bus device/driver naming
isa_bus: delete snd_ prefix from the (sysfs visible) device/driver names.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11 16:55:50 +02:00