Commit Graph

434 Commits

Author SHA1 Message Date
Linus Torvalds e53289c0c5 mm: reinstante dropped pmd_trans_splitting() check
The check for a pmd being in the process of being split was dropped by
mistake by commit d10e63f294 ("mm: numa: Create basic numa page
hinting infrastructure"). Put it back.

Reported-by: Dave Jones <davej@redhat.com>
Debugged-by: Hillf Danton <dhillf@gmail.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Kirill Shutemov <kirill@shutemov.name>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-09 08:36:54 -08:00
Michal Hocko 53a59fc67f mm: limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT
Since commit e303297e6c ("mm: extended batches for generic
mmu_gather") we are batching pages to be freed until either
tlb_next_batch cannot allocate a new batch or we are done.

This works just fine most of the time but we can get in troubles with
non-preemptible kernel (CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY)
on large machines where too aggressive batching might lead to soft
lockups during process exit path (exit_mmap) because there are no
scheduling points down the free_pages_and_swap_cache path and so the
freeing can take long enough to trigger the soft lockup.

The lockup is harmless except when the system is setup to panic on
softlockup which is not that unusual.

The simplest way to work around this issue is to limit the maximum
number of batches in a single mmu_gather.  10k of collected pages should
be safe to prevent from soft lockups (we would have 2ms for one) even if
they are all freed without an explicit scheduling point.

This patch doesn't add any new explicit scheduling points because it
relies on zap_pmd_range during page tables zapping which calls
cond_resched per PMD.

The following lockup has been reported for 3.0 kernel with a huge
process (in order of hundreds gigs but I do know any more details).

  BUG: soft lockup - CPU#56 stuck for 22s! [kernel:31053]
  Modules linked in: af_packet nfs lockd fscache auth_rpcgss nfs_acl sunrpc mptctl mptbase autofs4 binfmt_misc dm_round_robin dm_multipath bonding cpufreq_conservative cpufreq_userspace cpufreq_powersave pcc_cpufreq mperf microcode fuse loop osst sg sd_mod crc_t10dif st qla2xxx scsi_transport_fc scsi_tgt netxen_nic i7core_edac iTCO_wdt joydev e1000e serio_raw pcspkr edac_core iTCO_vendor_support acpi_power_meter rtc_cmos hpwdt hpilo button container usbhid hid dm_mirror dm_region_hash dm_log linear uhci_hcd ehci_hcd usbcore usb_common scsi_dh_emc scsi_dh_alua scsi_dh_hp_sw scsi_dh_rdac scsi_dh dm_snapshot pcnet32 mii edd dm_mod raid1 ext3 mbcache jbd fan thermal processor thermal_sys hwmon cciss scsi_mod
  Supported: Yes
  CPU 56
  Pid: 31053, comm: kernel Not tainted 3.0.31-0.9-default #1 HP ProLiant DL580 G7
  RIP: 0010:  _raw_spin_unlock_irqrestore+0x8/0x10
  RSP: 0018:ffff883ec1037af0  EFLAGS: 00000206
  RAX: 0000000000000e00 RBX: ffffea01a0817e28 RCX: ffff88803ffd9e80
  RDX: 0000000000000200 RSI: 0000000000000206 RDI: 0000000000000206
  RBP: 0000000000000002 R08: 0000000000000001 R09: ffff887ec724a400
  R10: 0000000000000000 R11: dead000000200200 R12: ffffffff8144c26e
  R13: 0000000000000030 R14: 0000000000000297 R15: 000000000000000e
  FS:  00007ed834282700(0000) GS:ffff88c03f200000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 000000000068b240 CR3: 0000003ec13c5000 CR4: 00000000000006e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process kernel (pid: 31053, threadinfo ffff883ec1036000, task ffff883ebd5d4100)
  Call Trace:
    release_pages+0xc5/0x260
    free_pages_and_swap_cache+0x9d/0xc0
    tlb_flush_mmu+0x5c/0x80
    tlb_finish_mmu+0xe/0x50
    exit_mmap+0xbd/0x120
    mmput+0x49/0x120
    exit_mm+0x122/0x160
    do_exit+0x17a/0x430
    do_group_exit+0x3d/0xb0
    get_signal_to_deliver+0x247/0x480
    do_signal+0x71/0x1b0
    do_notify_resume+0x98/0xb0
    int_signal+0x12/0x17
  DWARF2 unwinder stuck at int_signal+0x12/0x17

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: <stable@vger.kernel.org>	[3.0+]
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-04 16:11:46 -08:00
Andy Shevchenko 2fbc57c53a mm: use kbasename()
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:17 -08:00
Andrew Morton b3dd20709d mm/memory.c: suppress warning
gcc-4.4.4 screws this up.

  mm/memory.c: In function 'do_pmd_numa_page':
  mm/memory.c:3594: warning: no return statement in function returning non-void

Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:12 -08:00
Linus Torvalds 3d59eebc5e Automatic NUMA Balancing V11
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJQx0kQAAoJEHzG/DNEskfi4fQP/R5PRovayroZALBMLnVJDaLD
 Ttr9p40VNXbiJ+MfRgatJjSSJZ4Jl+fC3NEqBhcwVZhckZZb9R2s0WtrSQo5+ZbB
 vdRfiuKoCaKM4cSZ08C12uTvsF6xjhjd27CTUlMkyOcDoKxMEFKelv0hocSxe4Wo
 xqlv3eF+VsY7kE1BNbgBP06SX4tDpIHRxXfqJPMHaSKQmre+cU0xG2GcEu3QGbHT
 DEDTI788YSaWLmBfMC+kWoaQl1+bV/FYvavIAS8/o4K9IKvgR42VzrXmaFaqrbgb
 72ksa6xfAi57yTmZHqyGmts06qYeBbPpKI+yIhCMInxA9CY3lPbvHppRf0RQOyzj
 YOi4hovGEMJKE+BCILukhJcZ9jCTtS3zut6v1rdvR88f4y7uhR9RfmRfsxuW7PNj
 3Rmh191+n0lVWDmhOs2psXuCLJr3LEiA0dFffN1z8REUTtTAZMsj8Rz+SvBNAZDR
 hsJhERVeXB6X5uQ5rkLDzbn1Zic60LjVw7LIp6SF2OYf/YKaF8vhyWOA8dyCEu8W
 CGo7AoG0BO8tIIr8+LvFe8CweypysZImx4AjCfIs4u9pu/v11zmBvO9NO5yfuObF
 BreEERYgTes/UITxn1qdIW4/q+Nr0iKO3CTqsmu6L1GfCz3/XzPGs3U26fUhllqi
 Ka0JKgnWvsa6ez6FSzKI
 =ivQa
 -----END PGP SIGNATURE-----

Merge tag 'balancenuma-v11' of git://git.kernel.org/pub/scm/linux/kernel/git/mel/linux-balancenuma

Pull Automatic NUMA Balancing bare-bones from Mel Gorman:
 "There are three implementations for NUMA balancing, this tree
  (balancenuma), numacore which has been developed in tip/master and
  autonuma which is in aa.git.

  In almost all respects balancenuma is the dumbest of the three because
  its main impact is on the VM side with no attempt to be smart about
  scheduling.  In the interest of getting the ball rolling, it would be
  desirable to see this much merged for 3.8 with the view to building
  scheduler smarts on top and adapting the VM where required for 3.9.

  The most recent set of comparisons available from different people are

    mel:    https://lkml.org/lkml/2012/12/9/108
    mingo:  https://lkml.org/lkml/2012/12/7/331
    tglx:   https://lkml.org/lkml/2012/12/10/437
    srikar: https://lkml.org/lkml/2012/12/10/397

  The results are a mixed bag.  In my own tests, balancenuma does
  reasonably well.  It's dumb as rocks and does not regress against
  mainline.  On the other hand, Ingo's tests shows that balancenuma is
  incapable of converging for this workloads driven by perf which is bad
  but is potentially explained by the lack of scheduler smarts.  Thomas'
  results show balancenuma improves on mainline but falls far short of
  numacore or autonuma.  Srikar's results indicate we all suffer on a
  large machine with imbalanced node sizes.

  My own testing showed that recent numacore results have improved
  dramatically, particularly in the last week but not universally.
  We've butted heads heavily on system CPU usage and high levels of
  migration even when it shows that overall performance is better.
  There are also cases where it regresses.  Of interest is that for
  specjbb in some configurations it will regress for lower numbers of
  warehouses and show gains for higher numbers which is not reported by
  the tool by default and sometimes missed in treports.  Recently I
  reported for numacore that the JVM was crashing with
  NullPointerExceptions but currently it's unclear what the source of
  this problem is.  Initially I thought it was in how numacore batch
  handles PTEs but I'm no longer think this is the case.  It's possible
  numacore is just able to trigger it due to higher rates of migration.

  These reports were quite late in the cycle so I/we would like to start
  with this tree as it contains much of the code we can agree on and has
  not changed significantly over the last 2-3 weeks."

* tag 'balancenuma-v11' of git://git.kernel.org/pub/scm/linux/kernel/git/mel/linux-balancenuma: (50 commits)
  mm/rmap, migration: Make rmap_walk_anon() and try_to_unmap_anon() more scalable
  mm/rmap: Convert the struct anon_vma::mutex to an rwsem
  mm: migrate: Account a transhuge page properly when rate limiting
  mm: numa: Account for failed allocations and isolations as migration failures
  mm: numa: Add THP migration for the NUMA working set scanning fault case build fix
  mm: numa: Add THP migration for the NUMA working set scanning fault case.
  mm: sched: numa: Delay PTE scanning until a task is scheduled on a new node
  mm: sched: numa: Control enabling and disabling of NUMA balancing if !SCHED_DEBUG
  mm: sched: numa: Control enabling and disabling of NUMA balancing
  mm: sched: Adapt the scanning rate if a NUMA hinting fault does not migrate
  mm: numa: Use a two-stage filter to restrict pages being migrated for unlikely task<->node relationships
  mm: numa: migrate: Set last_nid on newly allocated page
  mm: numa: split_huge_page: Transfer last_nid on tail page
  mm: numa: Introduce last_nid to the page frame
  sched: numa: Slowly increase the scanning period as NUMA faults are handled
  mm: numa: Rate limit setting of pte_numa if node is saturated
  mm: numa: Rate limit the amount of memory that is migrated between nodes
  mm: numa: Structures for Migrate On Fault per NUMA migration rate limiting
  mm: numa: Migrate pages handled during a pmd_numa hinting fault
  mm: numa: Migrate on reference policy
  ...
2012-12-16 15:18:08 -08:00
Dominik Dingel 66521d5aa6 mm/memory.c: remove unused code from do_wp_page()
page_mkwrite is initalized with zero and only set once, from that point
exists no way to get to the oom or oom_free_new labels.

[akpm@linux-foundation.org: cleanup]
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 17:38:35 -08:00
Kirill A. Shutemov 816422ad76 asm-generic, mm: pgtable: consolidate zero page helpers
We have two different implementation of is_zero_pfn() and my_zero_pfn()
helpers: for architectures with and without zero page coloring.

Let's consolidate them in <asm-generic/pgtable.h>.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 17:38:35 -08:00
Kirill A. Shutemov e180377f1a thp: change split_huge_page_pmd() interface
Pass vma instead of mm and add address parameter.

In most cases we already have vma on the stack. We provides
split_huge_page_pmd_mm() for few cases when we have mm, but not vma.

This change is preparation to huge zero pmd splitting implementation.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 17:38:31 -08:00
Kirill A. Shutemov 93b4796ded thp: do_huge_pmd_wp_page(): handle huge zero page
On write access to huge zero page we alloc a new huge page and clear it.

If ENOMEM, graceful fallback: we create a new pmd table and set pte around
fault address to newly allocated normal (4k) page.  All other ptes in the
pmd set to normal zero page.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 17:38:31 -08:00
Will Deacon a1dd450bcb mm: thp: set the accessed flag for old pages on access fault
On x86 memory accesses to pages without the ACCESSED flag set result in
the ACCESSED flag being set automatically.  With the ARM architecture a
page access fault is raised instead (and it will continue to be raised
until the ACCESSED flag is set for the appropriate PTE/PMD).

For normal memory pages, handle_pte_fault will call pte_mkyoung
(effectively setting the ACCESSED flag).  For transparent huge pages,
pmd_mkyoung will only be called for a write fault.

This patch ensures that faults on transparent hugepages which do not
result in a CoW update the access flags for the faulting pmd.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Ni zhan Chen <nizhan.chen@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-11 17:22:24 -08:00
Mel Gorman b8593bfda1 mm: sched: Adapt the scanning rate if a NUMA hinting fault does not migrate
The PTE scanning rate and fault rates are two of the biggest sources of
system CPU overhead with automatic NUMA placement.  Ideally a proper policy
would detect if a workload was properly placed, schedule and adjust the
PTE scanning rate accordingly. We do not track the necessary information
to do that but we at least know if we migrated or not.

This patch scans slower if a page was not migrated as the result of a
NUMA hinting fault up to sysctl_numa_balancing_scan_period_max which is
now higher than the previous default. Once every minute it will reset
the scanner in case of phase changes.

This is hilariously crude and the numbers are arbitrary. Workloads will
converge quite slowly in comparison to what a proper policy should be able
to do. On the plus side, we will chew up less CPU for workloads that have
no need for automatic balancing.

Signed-off-by: Mel Gorman <mgorman@suse.de>
2012-12-11 14:42:55 +00:00
Mel Gorman 9532fec118 mm: numa: Migrate pages handled during a pmd_numa hinting fault
To say that the PMD handling code was incorrectly transferred from autonuma
is an understatement. The intention was to handle a PMDs worth of pages
in the same fault and effectively batch the taking of the PTL and page
migration. The copied version instead has the impact of clearing a number
of pte_numa PTE entries and whether any page migration takes place depends
on racing. This just happens to work in some cases.

This patch handles pte_numa faults in batch when a pmd_numa fault is
handled. The pages are migrated if they are currently misplaced.
Essentially this is making an assumption that NUMA locality is
on a PMD boundary but that could be addressed by only setting
pmd_numa if all the pages within that PMD are on the same node
if necessary.

Signed-off-by: Mel Gorman <mgorman@suse.de>
2012-12-11 14:42:49 +00:00
Mel Gorman 03c5a6e163 mm: numa: Add pte updates, hinting and migration stats
It is tricky to quantify the basic cost of automatic NUMA placement in a
meaningful manner. This patch adds some vmstats that can be used as part
of a basic costing model.

u    = basic unit = sizeof(void *)
Ca   = cost of struct page access = sizeof(struct page) / u
Cpte = Cost PTE access = Ca
Cupdate = Cost PTE update = (2 * Cpte) + (2 * Wlock)
	where Cpte is incurred twice for a read and a write and Wlock
	is a constant representing the cost of taking or releasing a
	lock
Cnumahint = Cost of a minor page fault = some high constant e.g. 1000
Cpagerw = Cost to read or write a full page = Ca + PAGE_SIZE/u
Ci = Cost of page isolation = Ca + Wi
	where Wi is a constant that should reflect the approximate cost
	of the locking operation
Cpagecopy = Cpagerw + (Cpagerw * Wnuma) + Ci + (Ci * Wnuma)
	where Wnuma is the approximate NUMA factor. 1 is local. 1.2
	would imply that remote accesses are 20% more expensive

Balancing cost = Cpte * numa_pte_updates +
		Cnumahint * numa_hint_faults +
		Ci * numa_pages_migrated +
		Cpagecopy * numa_pages_migrated

Note that numa_pages_migrated is used as a measure of how many pages
were isolated even though it would miss pages that failed to migrate. A
vmstat counter could have been added for it but the isolation cost is
pretty marginal in comparison to the overall cost so it seemed overkill.

The ideal way to measure automatic placement benefit would be to count
the number of remote accesses versus local accesses and do something like

	benefit = (remote_accesses_before - remove_access_after) * Wnuma

but the information is not readily available. As a workload converges, the
expection would be that the number of remote numa hints would reduce to 0.

	convergence = numa_hint_faults_local / numa_hint_faults
		where this is measured for the last N number of
		numa hints recorded. When the workload is fully
		converged the value is 1.

This can measure if the placement policy is converging and how fast it is
doing it.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
2012-12-11 14:42:48 +00:00
Peter Zijlstra cbee9f88ec mm: numa: Add fault driven placement and migration
NOTE: This patch is based on "sched, numa, mm: Add fault driven
	placement and migration policy" but as it throws away all the policy
	to just leave a basic foundation I had to drop the signed-offs-by.

This patch creates a bare-bones method for setting PTEs pte_numa in the
context of the scheduler that when faulted later will be faulted onto the
node the CPU is running on.  In itself this does nothing useful but any
placement policy will fundamentally depend on receiving hints on placement
from fault context and doing something intelligent about it.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
2012-12-11 14:42:45 +00:00
Mel Gorman 4daae3b4b9 mm: mempolicy: Use _PAGE_NUMA to migrate pages
Note: Based on "mm/mpol: Use special PROT_NONE to migrate pages" but
	sufficiently different that the signed-off-bys were dropped

Combine our previous _PAGE_NUMA, mpol_misplaced and migrate_misplaced_page()
pieces into an effective migrate on fault scheme.

Note that (on x86) we rely on PROT_NONE pages being !present and avoid
the TLB flush from try_to_unmap(TTU_MIGRATION). This greatly improves the
page-migration performance.

Based-on-work-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mel Gorman <mgorman@suse.de>
2012-12-11 14:42:42 +00:00
Mel Gorman d10e63f294 mm: numa: Create basic numa page hinting infrastructure
Note: This patch started as "mm/mpol: Create special PROT_NONE
	infrastructure" and preserves the basic idea but steals *very*
	heavily from "autonuma: numa hinting page faults entry points" for
	the actual fault handlers without the migration parts.	The end
	result is barely recognisable as either patch so all Signed-off
	and Reviewed-bys are dropped. If Peter, Ingo and Andrea are ok with
	this version, I will re-add the signed-offs-by to reflect the history.

In order to facilitate a lazy -- fault driven -- migration of pages, create
a special transient PAGE_NUMA variant, we can then use the 'spurious'
protection faults to drive our migrations from.

The meaning of PAGE_NUMA depends on the architecture but on x86 it is
effectively PROT_NONE. Actual PROT_NONE mappings will not generate these
NUMA faults for the reason that the page fault code checks the permission on
the VMA (and will throw a segmentation fault on actual PROT_NONE mappings),
before it ever calls handle_mm_fault.

[dhillf@gmail.com: Fix typo]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
2012-12-11 14:42:39 +00:00
Andrea Arcangeli 0b9d705297 mm: numa: Support NUMA hinting page faults from gup/gup_fast
Introduce FOLL_NUMA to tell follow_page to check
pte/pmd_numa. get_user_pages must use FOLL_NUMA, and it's safe to do
so because it always invokes handle_mm_fault and retries the
follow_page later.

KVM secondary MMU page faults will trigger the NUMA hinting page
faults through gup_fast -> get_user_pages -> follow_page ->
handle_mm_fault.

Other follow_page callers like KSM should not use FOLL_NUMA, or they
would fail to get the pages if they use follow_page instead of
get_user_pages.

[ This patch was picked up from the AutoNUMA tree. ]

Originally-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
[ ported to this tree. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
2012-12-11 14:42:37 +00:00
Mel Gorman 4fd017708c mm: Check if PTE is already allocated during page fault
With transparent hugepage support, handle_mm_fault() has to be careful
that a normal PMD has been established before handling a PTE fault. To
achieve this, it used __pte_alloc() directly instead of pte_alloc_map
as pte_alloc_map is unsafe to run against a huge PMD. pte_offset_map()
is called once it is known the PMD is safe.

pte_alloc_map() is smart enough to check if a PTE is already present
before calling __pte_alloc but this check was lost. As a consequence,
PTEs may be allocated unnecessarily and the page table lock taken.
Thi useless PTE does get cleaned up but it's a performance hit which
is visible in page_test from aim9.

This patch simply re-adds the check normally done by pte_alloc_map to
check if the PTE needs to be allocated before taking the page table
lock. The effect is noticable in page_test from aim9.

 AIM9
                 2.6.38-vanilla 2.6.38-checkptenone
 creat-clo      446.10 ( 0.00%)   424.47 (-5.10%)
 page_test       38.10 ( 0.00%)    42.04 ( 9.37%)
 brk_test        52.45 ( 0.00%)    51.57 (-1.71%)
 exec_test      382.00 ( 0.00%)   456.90 (16.39%)
 fork_test       60.11 ( 0.00%)    67.79 (11.34%)
 MMTests Statistics: duration
 Total Elapsed Time (seconds)                611.90    612.22

(While this affects 2.6.38, it is a performance rather than a
functional bug and normally outside the rules -stable. While the big
performance differences are to a microbench, the difference in fork
and exec performance may be significant enough that -stable wants to
consider the patch)

Reported-by: Raz Ben Yehuda <raziebe@gmail.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rik van Riel <riel@redhat.com>
[ Picked this up from the AutoNUMA tree to help
  it upstream and to allow apples-to-apples
  performance comparisons. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-12-11 14:28:34 +00:00
David Rientjes 1756954c61 mm: fix build warning for uninitialized value
do_wp_page() sets mmun_called if mmun_start and mmun_end were
initialized and, if so, may call mmu_notifier_invalidate_range_end()
with these values.  This doesn't prevent gcc from emitting a build
warning though:

  mm/memory.c: In function `do_wp_page':
  mm/memory.c:2530: warning: `mmun_start' may be used uninitialized in this function
  mm/memory.c:2531: warning: `mmun_end' may be used uninitialized in this function

It's much easier to initialize the variables to impossible values and do
a simple comparison to determine if they were initialized to remove the
bool entirely.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-16 14:33:03 -08:00
David Rientjes b676b293fb mm, thp: fix mapped pages avoiding unevictable list on mlock
When a transparent hugepage is mapped and it is included in an mlock()
range, follow_page() incorrectly avoids setting the page's mlock bit and
moving it to the unevictable lru.

This is evident if you try to mlock(), munlock(), and then mlock() a
range again.  Currently:

	#define MAP_SIZE	(4 << 30)	/* 4GB */

	void *ptr = mmap(NULL, MAP_SIZE, PROT_READ | PROT_WRITE,
			 MAP_PRIVATE | MAP_ANONYMOUS, 0, 0);
	mlock(ptr, MAP_SIZE);

		$ grep -E "Unevictable|Inactive\(anon" /proc/meminfo
		Inactive(anon):     6304 kB
		Unevictable:     4213924 kB

	munlock(ptr, MAP_SIZE);

		Inactive(anon):  4186252 kB
		Unevictable:       19652 kB

	mlock(ptr, MAP_SIZE);

		Inactive(anon):  4198556 kB
		Unevictable:       21684 kB

Notice that less than 2MB was added to the unevictable list; this is
because these pages in the range are not transparent hugepages since the
4GB range was allocated with mmap() and has no specific alignment.  If
posix_memalign() were used instead, unevictable would not have grown at
all on the second mlock().

The fix is to call mlock_vma_page() so that the mlock bit is set and the
page is added to the unevictable list.  With this patch:

	mlock(ptr, MAP_SIZE);

		Inactive(anon):     4056 kB
		Unevictable:     4213940 kB

	munlock(ptr, MAP_SIZE);

		Inactive(anon):  4198268 kB
		Unevictable:       19636 kB

	mlock(ptr, MAP_SIZE);

		Inactive(anon):     4008 kB
		Unevictable:     4213940 kB

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:23:02 +09:00
Robert P. J. Day c462f179e4 mm/memory.c: fix typo in comment
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:59 +09:00
Haggai Eran 6bdb913f0a mm: wrap calls to set_pte_at_notify with invalidate_range_start and invalidate_range_end
In order to allow sleeping during invalidate_page mmu notifier calls, we
need to avoid calling when holding the PT lock.  In addition to its direct
calls, invalidate_page can also be called as a substitute for a change_pte
call, in case the notifier client hasn't implemented change_pte.

This patch drops the invalidate_page call from change_pte, and instead
wraps all calls to change_pte with invalidate_range_start and
invalidate_range_end calls.

Note that change_pte still cannot sleep after this patch, and that clients
implementing change_pte should not take action on it in case the number of
outstanding invalidate_range_start calls is larger than one, otherwise
they might miss a later invalidation.

Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Cc: Andrea Arcangeli <andrea@qumranet.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Haggai Eran <haggaie@mellanox.com>
Cc: Shachar Raindel <raindel@mellanox.com>
Cc: Liran Liss <liranl@mellanox.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:58 +09:00
Sagi Grimberg 2ec74c3ef2 mm: move all mmu notifier invocations to be done outside the PT lock
In order to allow sleeping during mmu notifier calls, we need to avoid
invoking them under the page table spinlock.  This patch solves the
problem by calling invalidate_page notification after releasing the lock
(but before freeing the page itself), or by wrapping the page invalidation
with calls to invalidate_range_begin and invalidate_range_end.

To prevent accidental changes to the invalidate_range_end arguments after
the call to invalidate_range_begin, the patch introduces a convention of
saving the arguments in consistently named locals:

	unsigned long mmun_start;	/* For mmu_notifiers */
	unsigned long mmun_end;	/* For mmu_notifiers */

	...

	mmun_start = ...
	mmun_end = ...
	mmu_notifier_invalidate_range_start(mm, mmun_start, mmun_end);

	...

	mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end);

The patch changes code to use this convention for all calls to
mmu_notifier_invalidate_range_start/end, except those where the calls are
close enough so that anyone who glances at the code can see the values
aren't changing.

This patchset is a preliminary step towards on-demand paging design to be
added to the RDMA stack.

Why do we want on-demand paging for Infiniband?

  Applications register memory with an RDMA adapter using system calls,
  and subsequently post IO operations that refer to the corresponding
  virtual addresses directly to HW.  Until now, this was achieved by
  pinning the memory during the registration calls.  The goal of on demand
  paging is to avoid pinning the pages of registered memory regions (MRs).
   This will allow users the same flexibility they get when swapping any
  other part of their processes address spaces.  Instead of requiring the
  entire MR to fit in physical memory, we can allow the MR to be larger,
  and only fit the current working set in physical memory.

Why should anyone care?  What problems are users currently experiencing?

  This can make programming with RDMA much simpler.  Today, developers
  that are working with more data than their RAM can hold need either to
  deregister and reregister memory regions throughout their process's
  life, or keep a single memory region and copy the data to it.  On demand
  paging will allow these developers to register a single MR at the
  beginning of their process's life, and let the operating system manage
  which pages needs to be fetched at a given time.  In the future, we
  might be able to provide a single memory access key for each process
  that would provide the entire process's address as one large memory
  region, and the developers wouldn't need to register memory regions at
  all.

Is there any prospect that any other subsystems will utilise these
infrastructural changes?  If so, which and how, etc?

  As for other subsystems, I understand that XPMEM wanted to sleep in
  MMU notifiers, as Christoph Lameter wrote at
  http://lkml.indiana.edu/hypermail/linux/kernel/0802.1/0460.html and
  perhaps Andrea knows about other use cases.

  Scheduling in mmu notifications is required since we need to sync the
  hardware with the secondary page tables change.  A TLB flush of an IO
  device is inherently slower than a CPU TLB flush, so our design works by
  sending the invalidation request to the device, and waiting for an
  interrupt before exiting the mmu notifier handler.

Avi said:

  kvm may be a buyer.  kvm::mmu_lock, which serializes guest page
  faults, also protects long operations such as destroying large ranges.
  It would be good to convert it into a spinlock, but as it is used inside
  mmu notifiers, this cannot be done.

  (there are alternatives, such as keeping the spinlock and using a
  generation counter to do the teardown in O(1), which is what the "may"
  is doing up there).

[akpm@linux-foundation.orgpossible speed tweak in hugetlb_cow(), cleanups]
Signed-off-by: Andrea Arcangeli <andrea@qumranet.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Haggai Eran <haggaie@mellanox.com>
Cc: Shachar Raindel <raindel@mellanox.com>
Cc: Liran Liss <liranl@mellanox.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:58 +09:00
Hugh Dickins e6c509f854 mm: use clear_page_mlock() in page_remove_rmap()
We had thought that pages could no longer get freed while still marked as
mlocked; but Johannes Weiner posted this program to demonstrate that
truncating an mlocked private file mapping containing COWed pages is still
mishandled:

#include <sys/types.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <stdio.h>

int main(void)
{
	char *map;
	int fd;

	system("grep mlockfreed /proc/vmstat");
	fd = open("chigurh", O_CREAT|O_EXCL|O_RDWR);
	unlink("chigurh");
	ftruncate(fd, 4096);
	map = mmap(NULL, 4096, PROT_WRITE, MAP_PRIVATE, fd, 0);
	map[0] = 11;
	mlock(map, sizeof(fd));
	ftruncate(fd, 0);
	close(fd);
	munlock(map, sizeof(fd));
	munmap(map, 4096);
	system("grep mlockfreed /proc/vmstat");
	return 0;
}

The anon COWed pages are not caught by truncation's clear_page_mlock() of
the pagecache pages; but unmap_mapping_range() unmaps them, so we ought to
look out for them there in page_remove_rmap().  Indeed, why should
truncation or invalidation be doing the clear_page_mlock() when removing
from pagecache?  mlock is a property of mapping in userspace, not a
property of pagecache: an mlocked unmapped page is nonsensical.

Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ying Han <yinghan@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:56 +09:00
Michel Lespinasse 6b2dbba8b6 mm: replace vma prio_tree with an interval tree
Implement an interval tree as a replacement for the VMA prio_tree.  The
algorithms are similar to lib/interval_tree.c; however that code can't be
directly reused as the interval endpoints are not explicitly stored in the
VMA.  So instead, the common algorithm is moved into a template and the
details (node type, how to get interval endpoints from the node, etc) are
filled in using the C preprocessor.

Once the interval tree functions are available, using them as a
replacement to the VMA prio tree is a relatively simple, mechanical job.

Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:39 +09:00
Konstantin Khlebnikov 314e51b985 mm: kill vma flag VM_RESERVED and mm->reserved_vm counter
A long time ago, in v2.4, VM_RESERVED kept swapout process off VMA,
currently it lost original meaning but still has some effects:

 | effect                 | alternative flags
-+------------------------+---------------------------------------------
1| account as reserved_vm | VM_IO
2| skip in core dump      | VM_IO, VM_DONTDUMP
3| do not merge or expand | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP
4| do not mlock           | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP

This patch removes reserved_vm counter from mm_struct.  Seems like nobody
cares about it, it does not exported into userspace directly, it only
reduces total_vm showed in proc.

Thus VM_RESERVED can be replaced with VM_IO or pair VM_DONTEXPAND | VM_DONTDUMP.

remap_pfn_range() and io_remap_pfn_range() set VM_IO|VM_DONTEXPAND|VM_DONTDUMP.
remap_vmalloc_range() set VM_DONTEXPAND | VM_DONTDUMP.

[akpm@linux-foundation.org: drivers/vfio/pci/vfio_pci.c fixup]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:19 +09:00
Konstantin Khlebnikov 4b6e1e3702 mm: kill vma flag VM_INSERTPAGE
Merge VM_INSERTPAGE into VM_MIXEDMAP.  VM_MIXEDMAP VMA can mix pure-pfn
ptes, special ptes and normal ptes.

Now copy_page_range() always copies VM_MIXEDMAP VMA on fork like
VM_PFNMAP.  If driver populates whole VMA at mmap() it probably not
expects page-faults.

This patch removes special check from vma_wants_writenotify() which
disables pages write tracking for VMA populated via vm_instert_page().
BDI below mapped file should not use dirty-accounting, moreover
do_wp_page() can handle this.

vm_insert_page() still marks vma after first usage.  Usually it is called
from f_op->mmap() handler under mm->mmap_sem write-lock, so it able to
change vma->vm_flags.  Caller must set VM_MIXEDMAP at mmap time if it
wants to call this function from other places, for example from page-fault
handler.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:17 +09:00
Konstantin Khlebnikov b3b9c2932c mm, x86, pat: rework linear pfn-mmap tracking
Replace the generic vma-flag VM_PFN_AT_MMAP with x86-only VM_PAT.

We can toss mapping address from remap_pfn_range() into
track_pfn_vma_new(), and collect all PAT-related logic together in
arch/x86/.

This patch also restores orignal frustration-free is_cow_mapping() check
in remap_pfn_range(), as it was before commit v2.6.28-rc8-88-g3c8bb73
("x86: PAT: store vm_pgoff for all linear_over_vma_region mappings - v3")

is_linear_pfn_mapping() checks can be removed from mm/huge_memory.c,
because it already handled by VM_PFNMAP in VM_NO_THP bit-mask.

[suresh.b.siddha@intel.com: Reset the VM_PAT flag as part of untrack_pfn_vma()]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:16 +09:00
Suresh Siddha 5180da410d x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn
With PAT enabled, vm_insert_pfn() looks up the existing pfn memory
attribute and uses it.  Expectation is that the driver reserves the
memory attributes for the pfn before calling vm_insert_pfn().

remap_pfn_range() (when called for the whole vma) will setup a new
attribute (based on the prot argument) for the specified pfn range.
This addresses the legacy usage which typically calls remap_pfn_range()
with a desired memory attribute.  For ranges smaller than the vma size
(which is typically not the case), remap_pfn_range() will use the
existing memory attribute for the pfn range.

Expose two different API's for these different behaviors.
track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn()
and track_pfn_remap() for the remap_pfn_range().

This cleanup also prepares the ground for the track/untrack pfn vma
routines to take over the ownership of setting PAT specific vm_flag in
the 'vma'.

[khlebnikov@openvz.org: Clear checks in track_pfn_remap()]
[akpm@linux-foundation.org: tweak a few comments]
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:16 +09:00
Linus Torvalds a0e881b7c1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull second vfs pile from Al Viro:
 "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the
  deadlock reproduced by xfstests 068), symlink and hardlink restriction
  patches, plus assorted cleanups and fixes.

  Note that another fsfreeze deadlock (emergency thaw one) is *not*
  dealt with - the series by Fernando conflicts a lot with Jan's, breaks
  userland ABI (FIFREEZE semantics gets changed) and trades the deadlock
  for massive vfsmount leak; this is going to be handled next cycle.
  There probably will be another pull request, but that stuff won't be
  in it."

Fix up trivial conflicts due to unrelated changes next to each other in
drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c}

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
  delousing target_core_file a bit
  Documentation: Correct s_umount state for freeze_fs/unfreeze_fs
  fs: Remove old freezing mechanism
  ext2: Implement freezing
  btrfs: Convert to new freezing mechanism
  nilfs2: Convert to new freezing mechanism
  ntfs: Convert to new freezing mechanism
  fuse: Convert to new freezing mechanism
  gfs2: Convert to new freezing mechanism
  ocfs2: Convert to new freezing mechanism
  xfs: Convert to new freezing code
  ext4: Convert to new freezing mechanism
  fs: Protect write paths by sb_start_write - sb_end_write
  fs: Skip atime update on frozen filesystem
  fs: Add freezing handling to mnt_want_write() / mnt_drop_write()
  fs: Improve filesystem freezing handling
  switch the protection of percpu_counter list to spinlock
  nfsd: Push mnt_want_write() outside of i_mutex
  btrfs: Push mnt_want_write() outside of i_mutex
  fat: Push mnt_want_write() outside of i_mutex
  ...
2012-08-01 10:26:23 -07:00
Mel Gorman d833352a43 mm: hugetlbfs: close race during teardown of hugetlbfs shared page tables
If a process creates a large hugetlbfs mapping that is eligible for page
table sharing and forks heavily with children some of whom fault and
others which destroy the mapping then it is possible for page tables to
get corrupted.  Some teardowns of the mapping encounter a "bad pmd" and
output a message to the kernel log.  The final teardown will trigger a
BUG_ON in mm/filemap.c.

This was reproduced in 3.4 but is known to have existed for a long time
and goes back at least as far as 2.6.37.  It was probably was introduced
in 2.6.20 by [39dde65c: shared page table for hugetlb page].  The messages
look like this;

[  ..........] Lots of bad pmd messages followed by this
[  127.164256] mm/memory.c:391: bad pmd ffff880412e04fe8(80000003de4000e7).
[  127.164257] mm/memory.c:391: bad pmd ffff880412e04ff0(80000003de6000e7).
[  127.164258] mm/memory.c:391: bad pmd ffff880412e04ff8(80000003de0000e7).
[  127.186778] ------------[ cut here ]------------
[  127.186781] kernel BUG at mm/filemap.c:134!
[  127.186782] invalid opcode: 0000 [#1] SMP
[  127.186783] CPU 7
[  127.186784] Modules linked in: af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq mperf ext3 jbd dm_mod coretemp crc32c_intel usb_storage ghash_clmulni_intel aesni_intel i2c_i801 r8169 mii uas sr_mod cdrom sg iTCO_wdt iTCO_vendor_support shpchp serio_raw cryptd aes_x86_64 e1000e pci_hotplug dcdbas aes_generic container microcode ext4 mbcache jbd2 crc16 sd_mod crc_t10dif i915 drm_kms_helper drm i2c_algo_bit ehci_hcd ahci libahci usbcore rtc_cmos usb_common button i2c_core intel_agp video intel_gtt fan processor thermal thermal_sys hwmon ata_generic pata_atiixp libata scsi_mod
[  127.186801]
[  127.186802] Pid: 9017, comm: hugetlbfs-test Not tainted 3.4.0-autobuild #53 Dell Inc. OptiPlex 990/06D7TR
[  127.186804] RIP: 0010:[<ffffffff810ed6ce>]  [<ffffffff810ed6ce>] __delete_from_page_cache+0x15e/0x160
[  127.186809] RSP: 0000:ffff8804144b5c08  EFLAGS: 00010002
[  127.186810] RAX: 0000000000000001 RBX: ffffea000a5c9000 RCX: 00000000ffffffc0
[  127.186811] RDX: 0000000000000000 RSI: 0000000000000009 RDI: ffff88042dfdad00
[  127.186812] RBP: ffff8804144b5c18 R08: 0000000000000009 R09: 0000000000000003
[  127.186813] R10: 0000000000000000 R11: 000000000000002d R12: ffff880412ff83d8
[  127.186814] R13: ffff880412ff83d8 R14: 0000000000000000 R15: ffff880412ff83d8
[  127.186815] FS:  00007fe18ed2c700(0000) GS:ffff88042dce0000(0000) knlGS:0000000000000000
[  127.186816] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  127.186817] CR2: 00007fe340000503 CR3: 0000000417a14000 CR4: 00000000000407e0
[  127.186818] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  127.186819] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  127.186820] Process hugetlbfs-test (pid: 9017, threadinfo ffff8804144b4000, task ffff880417f803c0)
[  127.186821] Stack:
[  127.186822]  ffffea000a5c9000 0000000000000000 ffff8804144b5c48 ffffffff810ed83b
[  127.186824]  ffff8804144b5c48 000000000000138a 0000000000001387 ffff8804144b5c98
[  127.186825]  ffff8804144b5d48 ffffffff811bc925 ffff8804144b5cb8 0000000000000000
[  127.186827] Call Trace:
[  127.186829]  [<ffffffff810ed83b>] delete_from_page_cache+0x3b/0x80
[  127.186832]  [<ffffffff811bc925>] truncate_hugepages+0x115/0x220
[  127.186834]  [<ffffffff811bca43>] hugetlbfs_evict_inode+0x13/0x30
[  127.186837]  [<ffffffff811655c7>] evict+0xa7/0x1b0
[  127.186839]  [<ffffffff811657a3>] iput_final+0xd3/0x1f0
[  127.186840]  [<ffffffff811658f9>] iput+0x39/0x50
[  127.186842]  [<ffffffff81162708>] d_kill+0xf8/0x130
[  127.186843]  [<ffffffff81162812>] dput+0xd2/0x1a0
[  127.186845]  [<ffffffff8114e2d0>] __fput+0x170/0x230
[  127.186848]  [<ffffffff81236e0e>] ? rb_erase+0xce/0x150
[  127.186849]  [<ffffffff8114e3ad>] fput+0x1d/0x30
[  127.186851]  [<ffffffff81117db7>] remove_vma+0x37/0x80
[  127.186853]  [<ffffffff81119182>] do_munmap+0x2d2/0x360
[  127.186855]  [<ffffffff811cc639>] sys_shmdt+0xc9/0x170
[  127.186857]  [<ffffffff81410a39>] system_call_fastpath+0x16/0x1b
[  127.186858] Code: 0f 1f 44 00 00 48 8b 43 08 48 8b 00 48 8b 40 28 8b b0 40 03 00 00 85 f6 0f 88 df fe ff ff 48 89 df e8 e7 cb 05 00 e9 d2 fe ff ff <0f> 0b 55 83 e2 fd 48 89 e5 48 83 ec 30 48 89 5d d8 4c 89 65 e0
[  127.186868] RIP  [<ffffffff810ed6ce>] __delete_from_page_cache+0x15e/0x160
[  127.186870]  RSP <ffff8804144b5c08>
[  127.186871] ---[ end trace 7cbac5d1db69f426 ]---

The bug is a race and not always easy to reproduce.  To reproduce it I was
doing the following on a single socket I7-based machine with 16G of RAM.

$ hugeadm --pool-pages-max DEFAULT:13G
$ echo $((18*1048576*1024)) > /proc/sys/kernel/shmmax
$ echo $((18*1048576*1024)) > /proc/sys/kernel/shmall
$ for i in `seq 1 9000`; do ./hugetlbfs-test; done

On my particular machine, it usually triggers within 10 minutes but
enabling debug options can change the timing such that it never hits.
Once the bug is triggered, the machine is in trouble and needs to be
rebooted.  The machine will respond but processes accessing proc like "ps
aux" will hang due to the BUG_ON.  shutdown will also hang and needs a
hard reset or a sysrq-b.

The basic problem is a race between page table sharing and teardown.  For
the most part page table sharing depends on i_mmap_mutex.  In some cases,
it is also taking the mm->page_table_lock for the PTE updates but with
shared page tables, it is the i_mmap_mutex that is more important.

Unfortunately it appears to be also insufficient. Consider the following
situation

Process A					Process B
---------					---------
hugetlb_fault					shmdt
  						LockWrite(mmap_sem)
    						  do_munmap
						    unmap_region
						      unmap_vmas
						        unmap_single_vma
						          unmap_hugepage_range
      						            Lock(i_mmap_mutex)
							    Lock(mm->page_table_lock)
							    huge_pmd_unshare/unmap tables <--- (1)
							    Unlock(mm->page_table_lock)
      						            Unlock(i_mmap_mutex)
  huge_pte_alloc				      ...
    Lock(i_mmap_mutex)				      ...
    vma_prio_walk, find svma, spte		      ...
    Lock(mm->page_table_lock)			      ...
    share spte					      ...
    Unlock(mm->page_table_lock)			      ...
    Unlock(i_mmap_mutex)			      ...
  hugetlb_no_page									  <--- (2)
						      free_pgtables
						        unlink_file_vma
							hugetlb_free_pgd_range
						    remove_vma_list

In this scenario, it is possible for Process A to share page tables with
Process B that is trying to tear them down.  The i_mmap_mutex on its own
does not prevent Process A walking Process B's page tables.  At (1) above,
the page tables are not shared yet so it unmaps the PMDs.  Process A sets
up page table sharing and at (2) faults a new entry.  Process B then trips
up on it in free_pgtables.

This patch fixes the problem by adding a new function
__unmap_hugepage_range_final that is only called when the VMA is about to
be destroyed.  This function clears VM_MAYSHARE during
unmap_hugepage_range() under the i_mmap_mutex.  This makes the VMA
ineligible for sharing and avoids the race.  Superficially this looks like
it would then be vunerable to truncate and madvise issues but hugetlbfs
has its own truncate handlers so does not use unmap_mapping_range() and
does not support madvise(DONTNEED).

This should be treated as a -stable candidate if it is merged.

Test program is as follows. The test case was mostly written by Michal
Hocko with a few minor changes to reproduce this bug.

==== CUT HERE ====

static size_t huge_page_size = (2UL << 20);
static size_t nr_huge_page_A = 512;
static size_t nr_huge_page_B = 5632;

unsigned int get_random(unsigned int max)
{
	struct timeval tv;

	gettimeofday(&tv, NULL);
	srandom(tv.tv_usec);
	return random() % max;
}

static void play(void *addr, size_t size)
{
	unsigned char *start = addr,
		      *end = start + size,
		      *a;
	start += get_random(size/2);

	/* we could itterate on huge pages but let's give it more time. */
	for (a = start; a < end; a += 4096)
		*a = 0;
}

int main(int argc, char **argv)
{
	key_t key = IPC_PRIVATE;
	size_t sizeA = nr_huge_page_A * huge_page_size;
	size_t sizeB = nr_huge_page_B * huge_page_size;
	int shmidA, shmidB;
	void *addrA = NULL, *addrB = NULL;
	int nr_children = 300, n = 0;

	if ((shmidA = shmget(key, sizeA, IPC_CREAT|SHM_HUGETLB|0660)) == -1) {
		perror("shmget:");
		return 1;
	}

	if ((addrA = shmat(shmidA, addrA, SHM_R|SHM_W)) == (void *)-1UL) {
		perror("shmat");
		return 1;
	}
	if ((shmidB = shmget(key, sizeB, IPC_CREAT|SHM_HUGETLB|0660)) == -1) {
		perror("shmget:");
		return 1;
	}

	if ((addrB = shmat(shmidB, addrB, SHM_R|SHM_W)) == (void *)-1UL) {
		perror("shmat");
		return 1;
	}

fork_child:
	switch(fork()) {
		case 0:
			switch (n%3) {
			case 0:
				play(addrA, sizeA);
				break;
			case 1:
				play(addrB, sizeB);
				break;
			case 2:
				break;
			}
			break;
		case -1:
			perror("fork:");
			break;
		default:
			if (++n < nr_children)
				goto fork_child;
			play(addrA, sizeA);
			break;
	}
	shmdt(addrA);
	shmdt(addrB);
	do {
		wait(NULL);
	} while (--n > 0);
	shmctl(shmidA, IPC_RMID, NULL);
	shmctl(shmidB, IPC_RMID, NULL);
	return 0;
}

[akpm@linux-foundation.org: name the declaration's args, fix CONFIG_HUGETLBFS=n build]
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:50 -07:00
Jeff Liu 51a07e50b2 mm/memory.c:print_vma_addr(): call up_read(&mm->mmap_sem) directly
Call up_read(&mm->mmap_sem) directly since we have already got mm via
current->mm at the beginning of print_vma_addr().

Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:43 -07:00
Aneesh Kumar K.V 24669e5847 hugetlb: use mmu_gather instead of a temporary linked list for accumulating pages
Use a mmu_gather instead of a temporary linked list for accumulating pages
when we unmap a hugepage range

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:40 -07:00
Jan Kara 41c4d25f78 mm: Update file times from fault path only if .page_mkwrite is not set
Filesystems wanting to properly support freezing need to have control
when file_update_time() is called. After pushing file_update_time()
to all relevant .page_mkwrite implementations we can just stop calling
file_update_time() when filesystem implements .page_mkwrite.

Tested-by: Kamal Mostafa <kamal@canonical.com>
Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com>
Tested-by: Dann Frazier <dann.frazier@canonical.com>
Tested-by: Massimo Morana <massimo.morana@canonical.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-31 01:02:48 +04:00
Linus Torvalds 4cb38750d4 Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/mm changes from Peter Anvin:
 "The big change here is the patchset by Alex Shi to use INVLPG to flush
  only the affected pages when we only need to flush a small page range.

  It also removes the special INVALIDATE_TLB_VECTOR interrupts (32
  vectors!) and replace it with an ordinary IPI function call."

Fix up trivial conflicts in arch/x86/include/asm/apic.h (added code next
to changed line)

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tlb: Fix build warning and crash when building for !SMP
  x86/tlb: do flush_tlb_kernel_range by 'invlpg'
  x86/tlb: replace INVALIDATE_TLB_VECTOR by CALL_FUNCTION_VECTOR
  x86/tlb: enable tlb flush range support for x86
  mm/mmu_gather: enable tlb flush range in generic mmu_gather
  x86/tlb: add tlb_flushall_shift knob into debugfs
  x86/tlb: add tlb_flushall_shift for specific CPU
  x86/tlb: fall back to flush all when meet a THP large page
  x86/flush_tlb: try flush_tlb_single one by one in flush_tlb_range
  x86/tlb_info: get last level TLB entry number of CPU
  x86: Add read_mostly declaration/definition to variables from smp.h
  x86: Define early read-mostly per-cpu macros
2012-07-26 13:17:17 -07:00
Alex Shi 597e1c3580 mm/mmu_gather: enable tlb flush range in generic mmu_gather
This patch enabled the tlb flush range support in generic mmu layer.

Most of arch has self tlb flush range support, like ARM/IA64 etc.
X86 arch has no this support in hardware yet. But another instruction
'invlpg' can implement this function in some degree. So, enable this
feather in generic layer for x86 now. and maybe useful for other archs
in further.

Generic mmu_gather struct is protected by micro
HAVE_GENERIC_MMU_GATHER. Other archs that has flush range supported
own self mmu_gather struct. So, now this change is safe for them.

In future we may unify this struct and related functions on multiple
archs.

Thanks for Peter Zijlstra time and time reminder for multiple
architecture code safe!

Signed-off-by: Alex Shi <alex.shi@intel.com>
Link: http://lkml.kernel.org/r/1340845344-27557-7-git-send-email-alex.shi@intel.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-06-27 19:29:11 -07:00
Randy Dunlap eb4546bbbd mm/memory.c: fix kernel-doc warnings
Fix kernel-doc warnings in mm/memory.c:

  Warning(mm/memory.c:1377): No description found for parameter 'start'
  Warning(mm/memory.c:1377): Excess function parameter 'address' description in 'zap_page_range'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20 14:39:36 -07:00
David Rientjes e0897d75f0 mm, thp: print useful information when mmap_sem is unlocked in zap_pmd_range
Andrea asked for addr, end, vma->vm_start, and vma->vm_end to be emitted
when !rwsem_is_locked(&tlb->mm->mmap_sem).  Otherwise, debugging the
underlying issue is more difficult.

Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20 14:39:35 -07:00
David Rientjes 1f1d06c34f thp, memcg: split hugepage for memcg oom on cow
On COW, a new hugepage is allocated and charged to the memcg.  If the
system is oom or the charge to the memcg fails, however, the fault
handler will return VM_FAULT_OOM which results in an oom kill.

Instead, it's possible to fallback to splitting the hugepage so that the
COW results only in an order-0 page being allocated and charged to the
memcg which has a higher liklihood to succeed.  This is expensive
because the hugepage must be split in the page fault handler, but it is
much better than unnecessarily oom killing a process.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:19 -07:00
Rik van Riel e709ffd616 mm: remove swap token code
The swap token code no longer fits in with the current VM model.  It
does not play well with cgroups or the better NUMA placement code in
development, since we have only one swap token globally.

It also has the potential to mess with scalability of the system, by
increasing the number of non-reclaimable pages on the active and
inactive anon LRU lists.

Last but not least, the swap token code has been broken for a year
without complaints, as reported by Konstantin Khlebnikov.  This suggests
we no longer have much use for it.

The days of sub-1G memory systems with heavy use of swap are over.  If
we ever need thrashing reducing code in the future, we will have to
implement something that does scale.

Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Hugh Dickins <hughd@google.com>
Acked-by: Bob Picco <bpicco@meloft.net>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:19 -07:00
Linus Torvalds 654443e20d Merge branch 'perf-uprobes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull user-space probe instrumentation from Ingo Molnar:
 "The uprobes code originates from SystemTap and has been used for years
  in Fedora and RHEL kernels.  This version is much rewritten, reviews
  from PeterZ, Oleg and myself shaped the end result.

  This tree includes uprobes support in 'perf probe' - but SystemTap
  (and other tools) can take advantage of user probe points as well.

  Sample usage of uprobes via perf, for example to profile malloc()
  calls without modifying user-space binaries.

  First boot a new kernel with CONFIG_UPROBE_EVENT=y enabled.

  If you don't know which function you want to probe you can pick one
  from 'perf top' or can get a list all functions that can be probed
  within libc (binaries can be specified as well):

	$ perf probe -F -x /lib/libc.so.6

  To probe libc's malloc():

	$ perf probe -x /lib64/libc.so.6 malloc
	Added new event:
	probe_libc:malloc    (on 0x7eac0)

  You can now use it in all perf tools, such as:

	perf record -e probe_libc:malloc -aR sleep 1

  Make use of it to create a call graph (as the flat profile is going to
  look very boring):

	$ perf record -e probe_libc:malloc -gR make
	[ perf record: Woken up 173 times to write data ]
	[ perf record: Captured and wrote 44.190 MB perf.data (~1930712

	$ perf report | less

	  32.03%            git  libc-2.15.so   [.] malloc
	                    |
	                    --- malloc

	  29.49%            cc1  libc-2.15.so   [.] malloc
	                    |
	                    --- malloc
	                       |
	                       |--0.95%-- 0x208eb1000000000
	                       |
	                       |--0.63%-- htab_traverse_noresize

	  11.04%             as  libc-2.15.so   [.] malloc
	                     |
	                     --- malloc
	                        |

	   7.15%             ld  libc-2.15.so   [.] malloc
	                     |
	                     --- malloc
	                        |

	   5.07%             sh  libc-2.15.so   [.] malloc
	                     |
	                     --- malloc
	                        |
	   4.99%  python-config  libc-2.15.so   [.] malloc
	          |
	          --- malloc
	             |
	   4.54%           make  libc-2.15.so   [.] malloc
	                   |
	                   --- malloc
	                      |
	                      |--7.34%-- glob
	                      |          |
	                      |          |--93.18%-- 0x41588f
	                      |          |
	                      |           --6.82%-- glob
	                      |                     0x41588f

	   ...

  Or:

	$ perf report -g flat | less

	# Overhead        Command  Shared Object      Symbol
	# ........  .............  .............  ..........
	#
	  32.03%            git  libc-2.15.so   [.] malloc
	          27.19%
	              malloc

	  29.49%            cc1  libc-2.15.so   [.] malloc
	          24.77%
	              malloc

	  11.04%             as  libc-2.15.so   [.] malloc
	          11.02%
	              malloc

	   7.15%             ld  libc-2.15.so   [.] malloc
	           6.57%
	              malloc

	 ...

  The core uprobes design is fairly straightforward: uprobes probe
  points register themselves at (inode:offset) addresses of
  libraries/binaries, after which all existing (or new) vmas that map
  that address will have a software breakpoint injected at that address.
  vmas are COW-ed to preserve original content.  The probe points are
  kept in an rbtree.

  If user-space executes the probed inode:offset instruction address
  then an event is generated which can be recovered from the regular
  perf event channels and mmap-ed ring-buffer.

  Multiple probes at the same address are supported, they create a
  dynamic callback list of event consumers.

  The basic model is further complicated by the XOL speedup: the
  original instruction that is probed is copied (in an architecture
  specific fashion) and executed out of line when the probe triggers.
  The XOL area is a single vma per process, with a fixed number of
  entries (which limits probe execution parallelism).

  The API: uprobes are installed/removed via
  /sys/kernel/debug/tracing/uprobe_events, the API is integrated to
  align with the kprobes interface as much as possible, but is separate
  to it.

  Injecting a probe point is privileged operation, which can be relaxed
  by setting perf_paranoid to -1.

  You can use multiple probes as well and mix them with kprobes and
  regular PMU events or tracepoints, when instrumenting a task."

Fix up trivial conflicts in mm/memory.c due to previous cleanup of
unmap_single_vma().

* 'perf-uprobes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  perf probe: Detect probe target when m/x options are absent
  perf probe: Provide perf interface for uprobes
  tracing: Fix kconfig warning due to a typo
  tracing: Provide trace events interface for uprobes
  tracing: Extract out common code for kprobes/uprobes trace events
  tracing: Modify is_delete, is_return from int to bool
  uprobes/core: Decrement uprobe count before the pages are unmapped
  uprobes/core: Make background page replacement logic account for rss_stat counters
  uprobes/core: Optimize probe hits with the help of a counter
  uprobes/core: Allocate XOL slots for uprobes use
  uprobes/core: Handle breakpoint and singlestep exceptions
  uprobes/core: Rename bkpt to swbp
  uprobes/core: Make order of function parameters consistent across functions
  uprobes/core: Make macro names consistent
  uprobes: Update copyright notices
  uprobes/core: Move insn to arch specific structure
  uprobes/core: Remove uprobe_opcode_sz
  uprobes/core: Make instruction tables volatile
  uprobes: Move to kernel/events/
  uprobes/core: Clean up, refactor and improve the code
  ...
2012-05-24 11:39:34 -07:00
Linus Torvalds 4f74d2c8e8 vm: remove 'nr_accounted' calculations from the unmap_vmas() interfaces
The VM accounting makes no sense at this level, and half of the callers
didn't ever actually use the end result.  The only time we want to
unaccount the memory is when we actually remove the vma, so do the
accounting at that point instead.

This simplifies the interfaces (no need to pass down that silly page
counter to functions that really don't care), and also makes it much
more obvious what is actually going on: we do vm_[un]acct_memory() when
adding or removing the vma, not on random page walking.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-06 14:05:17 -07:00
Linus Torvalds 7e027b14d5 vm: simplify unmap_vmas() calling convention
None of the callers want to pass in 'zap_details', and it doesn't even
make sense for the case of actually unmapping vma's.  So remove the
argument, and clean up the interface.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-06 13:52:07 -07:00
Srikar Dronamraju cbc91f71b5 uprobes/core: Decrement uprobe count before the pages are unmapped
Uprobes has a callback (uprobe_munmap()) in the unmap path to
maintain the uprobes count.

In the exit path this callback gets called in unlink_file_vma().
However by the time unlink_file_vma() is called, the pages would
have been unmapped (in unmap_vmas()) and the task->rss_stat counts
accounted (in zap_pte_range()).

If the exiting process has probepoints, uprobe_munmap() checks if
the breakpoint instruction was around before decrementing the probe
count.

This results in a file backed page being reread by uprobe_munmap()
and hence it does not find the breakpoint.

This patch fixes this problem by moving the callback to
unmap_single_vma(). Since unmap_single_vma() may not unmap the
complete vma, add start and end parameters to uprobe_munmap().

This bug became apparent courtesy of commit c3f0327f8e
("mm: add rss counters consistency check").

Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120411103527.23245.9835.sendpatchset@srdronam.in.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-04-14 13:25:48 +02:00
Jason Baron 909af768e8 coredump: remove VM_ALWAYSDUMP flag
The motivation for this patchset was that I was looking at a way for a
qemu-kvm process, to exclude the guest memory from its core dump, which
can be quite large.  There are already a number of filter flags in
/proc/<pid>/coredump_filter, however, these allow one to specify 'types'
of kernel memory, not specific address ranges (which is needed in this
case).

Since there are no more vma flags available, the first patch eliminates
the need for the 'VM_ALWAYSDUMP' flag.  The flag is used internally by
the kernel to mark vdso and vsyscall pages.  However, it is simple
enough to check if a vma covers a vdso or vsyscall page without the need
for this flag.

The second patch then replaces the 'VM_ALWAYSDUMP' flag with a new
'VM_NODUMP' flag, which can be set by userspace using new madvise flags:
'MADV_DONTDUMP', and unset via 'MADV_DODUMP'.  The core dump filters
continue to work the same as before unless 'MADV_DONTDUMP' is set on the
region.

The qemu code which implements this features is at:

  http://people.redhat.com/~jbaron/qemu-dump/qemu-dump.patch

In my testing the qemu core dump shrunk from 383MB -> 13MB with this
patch.

I also believe that the 'MADV_DONTDUMP' flag might be useful for
security sensitive apps, which might want to select which areas are
dumped.

This patch:

The VM_ALWAYSDUMP flag is currently used by the coredump code to
indicate that a vma is part of a vsyscall or vdso section.  However, we
can determine if a vma is in one these sections by checking it against
the gate_vma and checking for a non-NULL return value from
arch_vma_name().  Thus, freeing a valuable vma bit.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Acked-by: Roland McGrath <roland@hack.frob.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:42 -07:00
Linus Torvalds 95211279c5 Merge branch 'akpm' (Andrew's patch-bomb)
Merge first batch of patches from Andrew Morton:
 "A few misc things and all the MM queue"

* emailed from Andrew Morton <akpm@linux-foundation.org>: (92 commits)
  memcg: avoid THP split in task migration
  thp: add HPAGE_PMD_* definitions for !CONFIG_TRANSPARENT_HUGEPAGE
  memcg: clean up existing move charge code
  mm/memcontrol.c: remove unnecessary 'break' in mem_cgroup_read()
  mm/memcontrol.c: remove redundant BUG_ON() in mem_cgroup_usage_unregister_event()
  mm/memcontrol.c: s/stealed/stolen/
  memcg: fix performance of mem_cgroup_begin_update_page_stat()
  memcg: remove PCG_FILE_MAPPED
  memcg: use new logic for page stat accounting
  memcg: remove PCG_MOVE_LOCK flag from page_cgroup
  memcg: simplify move_account() check
  memcg: remove EXPORT_SYMBOL(mem_cgroup_update_page_stat)
  memcg: kill dead prev_priority stubs
  memcg: remove PCG_CACHE page_cgroup flag
  memcg: let css_get_next() rely upon rcu_read_lock()
  cgroup: revert ss_id_lock to spinlock
  idr: make idr_get_next() good for rcu_read_lock()
  memcg: remove unnecessary thp check in page stat accounting
  memcg: remove redundant returns
  memcg: enum lru_list lru
  ...
2012-03-22 09:04:48 -07:00
David Rientjes ea48cf7863 mm, counters: fold __sync_task_rss_stat() into sync_mm_rss()
There's no difference between sync_mm_rss() and __sync_task_rss_stat(),
so fold the latter into the former.

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:59 -07:00
David Rientjes 05af2e104a mm, counters: remove task argument to sync_mm_rss() and __sync_task_rss_stat()
sync_mm_rss() can only be used for current to avoid race conditions in
iterating and clearing its per-task counters.  Remove the task argument
for it and its helper function, __sync_task_rss_stat(), to avoid thinking
it can be used safely for anything other than current.

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:59 -07:00
Konstantin Khlebnikov 69c978232a mm: make get_mm_counter static-inline
Make get_mm_counter() always static inline, it is simple enough for that.
And remove unused set_mm_counter()

bloat-o-meter:

add/remove: 0/1 grow/shrink: 4/12 up/down: 99/-341 (-242)
function                                     old     new   delta
try_to_unmap_one                             886     952     +66
sys_remap_file_pages                        1214    1230     +16
dup_mm                                      1684    1700     +16
do_exit                                     2277    2278      +1
zap_page_range                               208     205      -3
unmap_region                                 304     296      -8
static.oom_kill_process                      554     546      -8
try_to_unmap_file                           1716    1700     -16
getrusage                                    925     909     -16
flush_old_exec                              1704    1688     -16
static.dump_header                           416     390     -26
acct_update_integrals                        218     187     -31
do_task_stat                                2986    2954     -32
get_mm_counter                                34       -     -34
xacct_add_tsk                                371     334     -37
task_statm                                   172     118     -54
task_mem                                     383     323     -60

try_to_unmap_one() grows because update_hiwater_rss() now completely inline.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:55 -07:00
Andrea Arcangeli 1a5a9906d4 mm: thp: fix pmd_bad() triggering in code paths holding mmap_sem read mode
In some cases it may happen that pmd_none_or_clear_bad() is called with
the mmap_sem hold in read mode.  In those cases the huge page faults can
allocate hugepmds under pmd_none_or_clear_bad() and that can trigger a
false positive from pmd_bad() that will not like to see a pmd
materializing as trans huge.

It's not khugepaged causing the problem, khugepaged holds the mmap_sem
in write mode (and all those sites must hold the mmap_sem in read mode
to prevent pagetables to go away from under them, during code review it
seems vm86 mode on 32bit kernels requires that too unless it's
restricted to 1 thread per process or UP builds).  The race is only with
the huge pagefaults that can convert a pmd_none() into a
pmd_trans_huge().

Effectively all these pmd_none_or_clear_bad() sites running with
mmap_sem in read mode are somewhat speculative with the page faults, and
the result is always undefined when they run simultaneously.  This is
probably why it wasn't common to run into this.  For example if the
madvise(MADV_DONTNEED) runs zap_page_range() shortly before the page
fault, the hugepage will not be zapped, if the page fault runs first it
will be zapped.

Altering pmd_bad() not to error out if it finds hugepmds won't be enough
to fix this, because zap_pmd_range would then proceed to call
zap_pte_range (which would be incorrect if the pmd become a
pmd_trans_huge()).

The simplest way to fix this is to read the pmd in the local stack
(regardless of what we read, no need of actual CPU barriers, only
compiler barrier needed), and be sure it is not changing under the code
that computes its value.  Even if the real pmd is changing under the
value we hold on the stack, we don't care.  If we actually end up in
zap_pte_range it means the pmd was not none already and it was not huge,
and it can't become huge from under us (khugepaged locking explained
above).

All we need is to enforce that there is no way anymore that in a code
path like below, pmd_trans_huge can be false, but pmd_none_or_clear_bad
can run into a hugepmd.  The overhead of a barrier() is just a compiler
tweak and should not be measurable (I only added it for THP builds).  I
don't exclude different compiler versions may have prevented the race
too by caching the value of *pmd on the stack (that hasn't been
verified, but it wouldn't be impossible considering
pmd_none_or_clear_bad, pmd_bad, pmd_trans_huge, pmd_none are all inlines
and there's no external function called in between pmd_trans_huge and
pmd_none_or_clear_bad).

		if (pmd_trans_huge(*pmd)) {
			if (next-addr != HPAGE_PMD_SIZE) {
				VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem));
				split_huge_page_pmd(vma->vm_mm, pmd);
			} else if (zap_huge_pmd(tlb, vma, pmd, addr))
				continue;
			/* fall through */
		}
		if (pmd_none_or_clear_bad(pmd))

Because this race condition could be exercised without special
privileges this was reported in CVE-2012-1179.

The race was identified and fully explained by Ulrich who debugged it.
I'm quoting his accurate explanation below, for reference.

====== start quote =======
      mapcount 0 page_mapcount 1
      kernel BUG at mm/huge_memory.c:1384!

    At some point prior to the panic, a "bad pmd ..." message similar to the
    following is logged on the console:

      mm/memory.c:145: bad pmd ffff8800376e1f98(80000000314000e7).

    The "bad pmd ..." message is logged by pmd_clear_bad() before it clears
    the page's PMD table entry.

        143 void pmd_clear_bad(pmd_t *pmd)
        144 {
    ->  145         pmd_ERROR(*pmd);
        146         pmd_clear(pmd);
        147 }

    After the PMD table entry has been cleared, there is an inconsistency
    between the actual number of PMD table entries that are mapping the page
    and the page's map count (_mapcount field in struct page). When the page
    is subsequently reclaimed, __split_huge_page() detects this inconsistency.

       1381         if (mapcount != page_mapcount(page))
       1382                 printk(KERN_ERR "mapcount %d page_mapcount %d\n",
       1383                        mapcount, page_mapcount(page));
    -> 1384         BUG_ON(mapcount != page_mapcount(page));

    The root cause of the problem is a race of two threads in a multithreaded
    process. Thread B incurs a page fault on a virtual address that has never
    been accessed (PMD entry is zero) while Thread A is executing an madvise()
    system call on a virtual address within the same 2 MB (huge page) range.

               virtual address space
              .---------------------.
              |                     |
              |                     |
            .-|---------------------|
            | |                     |
            | |                     |<-- B(fault)
            | |                     |
      2 MB  | |/////////////////////|-.
      huge <  |/////////////////////|  > A(range)
      page  | |/////////////////////|-'
            | |                     |
            | |                     |
            '-|---------------------|
              |                     |
              |                     |
              '---------------------'

    - Thread A is executing an madvise(..., MADV_DONTNEED) system call
      on the virtual address range "A(range)" shown in the picture.

    sys_madvise
      // Acquire the semaphore in shared mode.
      down_read(&current->mm->mmap_sem)
      ...
      madvise_vma
        switch (behavior)
        case MADV_DONTNEED:
             madvise_dontneed
               zap_page_range
                 unmap_vmas
                   unmap_page_range
                     zap_pud_range
                       zap_pmd_range
                         //
                         // Assume that this huge page has never been accessed.
                         // I.e. content of the PMD entry is zero (not mapped).
                         //
                         if (pmd_trans_huge(*pmd)) {
                             // We don't get here due to the above assumption.
                         }
                         //
                         // Assume that Thread B incurred a page fault and
             .---------> // sneaks in here as shown below.
             |           //
             |           if (pmd_none_or_clear_bad(pmd))
             |               {
             |                 if (unlikely(pmd_bad(*pmd)))
             |                     pmd_clear_bad
             |                     {
             |                       pmd_ERROR
             |                         // Log "bad pmd ..." message here.
             |                       pmd_clear
             |                         // Clear the page's PMD entry.
             |                         // Thread B incremented the map count
             |                         // in page_add_new_anon_rmap(), but
             |                         // now the page is no longer mapped
             |                         // by a PMD entry (-> inconsistency).
             |                     }
             |               }
             |
             v
    - Thread B is handling a page fault on virtual address "B(fault)" shown
      in the picture.

    ...
    do_page_fault
      __do_page_fault
        // Acquire the semaphore in shared mode.
        down_read_trylock(&mm->mmap_sem)
        ...
        handle_mm_fault
          if (pmd_none(*pmd) && transparent_hugepage_enabled(vma))
              // We get here due to the above assumption (PMD entry is zero).
              do_huge_pmd_anonymous_page
                alloc_hugepage_vma
                  // Allocate a new transparent huge page here.
                ...
                __do_huge_pmd_anonymous_page
                  ...
                  spin_lock(&mm->page_table_lock)
                  ...
                  page_add_new_anon_rmap
                    // Here we increment the page's map count (starts at -1).
                    atomic_set(&page->_mapcount, 0)
                  set_pmd_at
                    // Here we set the page's PMD entry which will be cleared
                    // when Thread A calls pmd_clear_bad().
                  ...
                  spin_unlock(&mm->page_table_lock)

    The mmap_sem does not prevent the race because both threads are acquiring
    it in shared mode (down_read).  Thread B holds the page_table_lock while
    the page's map count and PMD table entry are updated.  However, Thread A
    does not synchronize on that lock.

====== end quote =======

[akpm@linux-foundation.org: checkpatch fixes]
Reported-by: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Jones <davej@redhat.com>
Acked-by: Larry Woodman <lwoodman@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org>		[2.6.38+]
Cc: Mark Salter <msalter@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:54 -07:00