Commit Graph

160 Commits

Author SHA1 Message Date
Scott James Remnant e6ceb32aa2 wait_task_stopped(): pass correct exit_code to wait_noreap_copyout()
In wait_task_stopped() exit_code already contains the right value for the
si_status member of siginfo, and this is simply set in the non WNOWAIT
case.

If you call waitid() with a stopped or traced process, you'll get the signal
in siginfo.si_status as expected -- however if you call waitid(WNOWAIT) at the
same time, you'll get the signal << 8 | 0x7f

Pass it unchanged to wait_noreap_copyout(); we would only need to shift it
and add 0x7f if we were returning it in the user status field and that
isn't used for any function that permits WNOWAIT.

Signed-off-by: Scott James Remnant <scott@ubuntu.com>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29 09:24:55 -08:00
Oleg Nesterov c895078355 wait_task_stopped(): don't use task_pid_nr_ns() lockless
wait_task_stopped(WNOWAIT) does task_pid_nr_ns() without tasklist/rcu lock,
we can read an already freed memory.  Use the cached pid_t value.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Looks-good-to: Roland McGrath <roland@redhat.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29 09:24:52 -08:00
Roland McGrath a3474224e6 wait_task_stopped: Check p->exit_state instead of TASK_TRACED
The original meaning of the old test (p->state > TASK_STOPPED) was
"not dead", since it was before TASK_TRACED existed and before the
state/exit_state split.  It was a wrong correction in commit
14bf01bb05 to make this test for
TASK_TRACED instead.  It should have been changed when TASK_TRACED
was introducted and again when exit_state was introduced.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Cc: Kees Cook <kees@ubuntu.com>
Acked-by: Scott James Remnant <scott@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-15 08:36:27 -08:00
Alexey Dobriyan a39bc51691 Uninline fork.c/exit.c
Save ~650 bytes here.

add/remove: 4/0 grow/shrink: 0/7 up/down: 430/-1088 (-658)
function                                     old     new   delta
__copy_fs_struct                               -     202    +202
__put_fs_struct                                -     112    +112
__exit_fs                                      -      58     +58
__exit_files                                   -      58     +58
exit_files                                    58       2     -56
put_fs_struct                                112       5    -107
exit_fs                                      161       2    -159
sys_unshare                                  774     590    -184
copy_process                                4031    3840    -191
do_exit                                     1791    1597    -194
copy_fs_struct                               202       5    -197

No difference in lmbench lat_proc tests on 2-way Opteron 246.
Smaaaal degradation on UP P4 (within errors).

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:56 -07:00
Pavel Emelyanov ba25f9dcc4 Use helpers to obtain task pid in printks
The task_struct->pid member is going to be deprecated, so start
using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in
the kernel.

The first thing to start with is the pid, printed to dmesg - in
this case we may safely use task_pid_nr(). Besides, printks produce
more (much more) than a half of all the explicit pid usage.

[akpm@linux-foundation.org: git-drm went and changed lots of stuff]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:43 -07:00
Pavel Emelyanov 9a2e70572e Isolate the explicit usage of signal->pgrp
The pgrp field is not used widely around the kernel so it is now marked as
deprecated with appropriate comment.

The initialization of INIT_SIGNALS is trimmed because
a) they are set to 0 automatically;
b) gcc cannot properly initialize two anonymous (the second one
   is the one with the session) unions. In this particular case
   to make it compile we'd have to add some field initialized
   right before the .pgrp.

This is the same patch as the 1ec320afdc one
(from Cedric), but for the pgrp field.

Some progress report:

We have to deprecate the pid, tgid, session and pgrp fields on struct
task_struct and struct signal_struct.  The session and pgrp are already
deprecated.  The tgid value is close to being such - the worst known usage
in in fs/locks.c and audit code.  The pid field deprecation is mainly
blocked by numerous printk-s around the kernel that print the tsk->pid to
log.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:43 -07:00
Pavel Emelyanov b488893a39 pid namespaces: changes to show virtual ids to user
This is the largest patch in the set. Make all (I hope) the places where
the pid is shown to or get from user operate on the virtual pids.

The idea is:
 - all in-kernel data structures must store either struct pid itself
   or the pid's global nr, obtained with pid_nr() call;
 - when seeking the task from kernel code with the stored id one
   should use find_task_by_pid() call that works with global pids;
 - when showing pid's numerical value to the user the virtual one
   should be used, but however when one shows task's pid outside this
   task's namespace the global one is to be used;
 - when getting the pid from userspace one need to consider this as
   the virtual one and use appropriate task/pid-searching functions.

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: nuther build fix]
[akpm@linux-foundation.org: yet nuther build fix]
[akpm@linux-foundation.org: remove unneeded casts]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Paul Menage <menage@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:40 -07:00
Sukadev Bhattiprolu 3eb07c8c8a pid namespaces: destroy pid namespace on init's death
Terminate all processes in a namespace when the reaper of the namespace is
exiting.  We do this by walking the pidmap of the namespace and sending
SIGKILL to all processes.

Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:40 -07:00
Pavel Emelyanov 60347f6716 pid namespaces: prepare proc_flust_task() to flush entries from multiple proc trees
The first part is trivial - we just make the proc_flush_task() to operate on
arbitrary vfsmount with arbitrary ids and pass the pid and global proc_mnt to
it.

The other change is more tricky: I moved the proc_flush_task() call in
release_task() higher to address the following problem.

When flushing task from many proc trees we need to know the set of ids (not
just one pid) to find the dentries' names to flush.  Thus we need to pass the
task's pid to proc_flush_task() as struct pid is the only object that can
provide all the pid numbers.  But after __exit_signal() task has detached all
his pids and this information is lost.

This creates a tiny gap for proc_pid_lookup() to bring some dentries back to
tree and keep them in hash (since pids are still alive before __exit_signal())
till the next shrink, but since proc_flush_task() does not provide a 100%
guarantee that the dentries will be flushed, this is OK to do so.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:38 -07:00
Pavel Emelyanov 2e4a707269 pid namespaces: move exit_task_namespaces()
Make task release its namespaces after it has reparented all his children to
child_reaper, but before it notifies its parent about its death.

The reason to release namespaces after reparenting is that when task exits it
may send a signal to its parent (SIGCHLD), but if the parent has already
exited its namespaces there will be no way to decide what pid to dever to him
- parent can be from different namespace.

The reason to release namespace before notifying the parent it that when task
sends a SIGCHLD to parent it can call wait() on this taks and release it.  But
releasing the mnt namespace implies dropping of all the mounts in the mnt
namespace and NFS expects the task to have valid sighand pointer.

Thanks to Oleg for pointing out some races that can apear and helping with
patches and fixes.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:38 -07:00
Oleg Nesterov 762a24beed pid namespaces: rework forget_original_parent()
A pid namespace is a "view" of a particular set of tasks on the system.  They
work in a similar way to filesystem namespaces.  A file (or a process) can be
accessed in multiple namespaces, but it may have a different name in each.  In
a filesystem, this name might be /etc/passwd in one namespace, but
/chroot/etc/passwd in another.

For processes, a process may have pid 1234 in one namespace, but be pid 1 in
another.  This allows new pid namespaces to have basically arbitrary pids, and
not have to worry about what pids exist in other namespaces.  This is
essential for checkpoint/restart where a restarted process's pid might collide
with an existing process on the system's pid.

In this particular implementation, pid namespaces have a parent-child
relationship, just like processes.  A process in a pid namespace may see all
of the processes in the same namespace, as well as all of the processes in all
of the namespaces which are children of its namespace.  Processes may not,
however, see others which are in their parent's namespace, but not in their
own.  The same goes for sibling namespaces.

The know issue to be solved in the nearest future is signal handling in the
namespace boundary.  That is, currently the namespace's init is treated like
an ordinary task that can be killed from within an namespace.  Ideally, the
signal handling by the namespace's init should have two sides: when signaling
the init from its namespace, the init should look like a real init task, i.e.
receive only those signals, that is explicitly wants to; when signaling the
init from one of the parent namespaces, init should look like an ordinary
task, i.e.  receive any signal, only taking the general permissions into
account.

The pid namespace was developed by Pavel Emlyanov and Sukadev Bhattiprolu and
we eventually came to almost the same implementation, which differed in some
details.  This set is based on Pavel's patches, but it includes comments and
patches that from Sukadev.

Many thanks to Oleg, who reviewed the patches, pointed out many BUGs and made
valuable advises on how to make this set cleaner.

This patch:

We have to call exit_task_namespaces() only after the exiting task has
reparented all his children and is sure that no other threads will reparent
theirs for it.  Why this is needed is explained in appropriate patch.  This
one only reworks the forget_original_parent() so that after calling this a
task cannot be/become parent of any other task.

We check PF_EXITING instead of ->exit_state while choosing the new parent.
Note that tasklits_lock acts as a barrier, everyone who takes tasklist after
us (when forget_original_parent() drops it) must see PF_EXITING.

The other changes are just cleanups.  They just move some code from
exit_notify to forget_original_parent().  It is a bit silly to declare
ptrace_dead in exit_notify(), take tasklist, pass ptrace_dead to
forget_original_parent(), unlock-lock-unlock tasklist, and then use
ptrace_dead.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:38 -07:00
Daniel Walker d4c5e41f3f whitespace fixes: task exit handling
Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:38 -07:00
Matthias Kaehlcke 03ff17979c kernel/exit.c: Use list_for_each_entry(_safe) instead of list_for_each(_safe)
kernel/exit.c: Convert list_for_each(_safe) to
list_for_each_entry(_safe) in forget_original_parent(), exit_notify()
and do_wait()

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:38 -07:00
Pavel Emelyanov cf7b708c8d Make access to task's nsproxy lighter
When someone wants to deal with some other taks's namespaces it has to lock
the task and then to get the desired namespace if the one exists.  This is
slow on read-only paths and may be impossible in some cases.

E.g.  Oleg recently noticed a race between unshare() and the (sent for
review in cgroups) pid namespaces - when the task notifies the parent it
has to know the parent's namespace, but taking the task_lock() is
impossible there - the code is under write locked tasklist lock.

On the other hand switching the namespace on task (daemonize) and releasing
the namespace (after the last task exit) is rather rare operation and we
can sacrifice its speed to solve the issues above.

The access to other task namespaces is proposed to be performed
like this:

     rcu_read_lock();
     nsproxy = task_nsproxy(tsk);
     if (nsproxy != NULL) {
             / *
               * work with the namespaces here
               * e.g. get the reference on one of them
               * /
     } / *
         * NULL task_nsproxy() means that this task is
         * almost dead (zombie)
         * /
     rcu_read_unlock();

This patch has passed the review by Eric and Oleg :) and,
of course, tested.

[clg@fr.ibm.com: fix unshare()]
[ebiederm@xmission.com: Update get_net_ns_by_pid]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:37 -07:00
Serge E. Hallyn b460cbc581 pid namespaces: define is_global_init() and is_container_init()
is_init() is an ambiguous name for the pid==1 check.  Split it into
is_global_init() and is_container_init().

A cgroup init has it's tsk->pid == 1.

A global init also has it's tsk->pid == 1 and it's active pid namespace
is the init_pid_ns.  But rather than check the active pid namespace,
compare the task structure with 'init_pid_ns.child_reaper', which is
initialized during boot to the /sbin/init process and never changes.

Changelog:

	2.6.22-rc4-mm2-pidns1:
	- Use 'init_pid_ns.child_reaper' to determine if a given task is the
	  global init (/sbin/init) process. This would improve performance
	  and remove dependence on the task_pid().

	2.6.21-mm2-pidns2:

	- [Sukadev Bhattiprolu] Changed is_container_init() calls in {powerpc,
	  ppc,avr32}/traps.c for the _exception() call to is_global_init().
	  This way, we kill only the cgroup if the cgroup's init has a
	  bug rather than force a kernel panic.

[akpm@linux-foundation.org: fix comment]
[sukadev@us.ibm.com: Use is_global_init() in arch/m32r/mm/fault.c]
[bunk@stusta.de: kernel/pid.c: remove unused exports]
[sukadev@us.ibm.com: Fix capability.c to work with threaded init]
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Acked-by: Pavel Emelianov <xemul@openvz.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Herbert Poetzel <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:37 -07:00
Sukadev Bhattiprolu 88f21d8182 pid namespaces: rename child_reaper() function
Rename the child_reaper() function to task_child_reaper() to be similar to
other task_* functions and to distinguish the function from 'struct
pid_namspace.child_reaper'.

Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Pavel Emelianov <xemul@openvz.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Herbert Poetzel <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:37 -07:00
Pavel Emelianov a47afb0f9d pid namespaces: round up the API
The set of functions process_session, task_session, process_group and
task_pgrp is confusing, as the names can be mixed with each other when looking
at the code for a long time.

The proposals are to
* equip the functions that return the integer with _nr suffix to
  represent that fact,
* and to make all functions work with task (not process) by making
  the common prefix of the same name.

For monotony the routines signal_session() and set_signal_session() are
replaced with task_session_nr() and set_task_session(), especially since they
are only used with the explicit task->signal dereference.

Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:37 -07:00
Paul Menage 8793d854ed Task Control Groups: make cpusets a client of cgroups
Remove the filesystem support logic from the cpusets system and makes cpusets
a cgroup subsystem

The "cpuset" filesystem becomes a dummy filesystem; attempts to mount it get
passed through to the cgroup filesystem with the appropriate options to
emulate the old cpuset filesystem behaviour.

Signed-off-by: Paul Menage <menage@google.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:36 -07:00
Paul Menage b4f48b6363 Task Control Groups: add fork()/exit() hooks
This adds the necessary hooks to the fork() and exit() paths to ensure
that new children inherit their parent's cgroup assignments, and that
exiting processes release reference counts on their cgroups.

Signed-off-by: Paul Menage <menage@google.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:36 -07:00
Alexey Dobriyan 42b2dd0a02 Shrink task_struct if CONFIG_FUTEX=n
robust_list, compat_robust_list, pi_state_list, pi_state_cache are
really used if futexes are on.

Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:55 -07:00
Oleg Nesterov 6db840fa78 exec: RT sub-thread can livelock and monopolize CPU on exec
de_thread() yields waiting for ->group_leader to be a zombie. This deadlocks
if an rt-prio execer shares the same cpu with ->group_leader. Change the code
to use ->group_exit_task/notify_count mechanics.

This patch certainly uglifies the code, perhaps someone can suggest something
better.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:54 -07:00
Oleg Nesterov 715015e8da wait_task_stopped/continued: remove unneeded p->signal != NULL check
The child was found on ->children list under tasklist_lock, it must have a
valid ->signal. __exit_signal() both removes the task from parent->children
and clears ->signal "atomically" under write_lock(tasklist).

Remove unneeded checks.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:52 -07:00
Oleg Nesterov 442a10cf9e wait_task_zombie: don't fight with non-existing race with a dying ptracee
The "p->exit_signal == -1 && p->ptrace == 0" check and the comment are
bogus.  We already did exactly the same check in eligible_child(), we did
not drop tasklist_lock since then, and both variables need
write_lock(tasklist) to be changed.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:51 -07:00
Oleg Nesterov 3ae4cbadf4 exit_notify: don't take tasklist for TIF_SIGPENDING re-targeting
->siglock provides enough protection to iterate over the thread group.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:51 -07:00
Oleg Nesterov 2f4e6e2a81 wait_task_zombie: fix 2/3 races vs forget_original_parent()
Two threads, T1 and T2.  T2 ptraces P, and P is not a child of ptracer's
thread group.  P exits and goes to TASK_ZOMBIE.

T1 does wait_task_zombie(P):

	P->exit_state = TASK_DEAD;
	...
	read_unlock(&tasklist_lock);

					T2 does exit(), takes tasklist,
					forget_original_parent() does
					__ptrace_unlink(P) but doesn't
					call do_notify_parent(P) because
					p->exit_state == EXIT_DEAD.

Now, P is not visible to our process: __ptrace_unlink() removed it from
->children. We should send notification to P->parent and release P if and
only if SIGCHLD is ignored.

And we have 3 bugs:

1. P->parent does do_wait() and gets -ECHILD (P is on ->parent->children,
   but its state is TASK_DEAD).

2. // wait_task_zombie() continues

	if (put_user(...)) {
		// TODO: is this safe?
		p->exit_state = EXIT_ZOMBIE;
		return;
	}

   we return without notification/release, task_struct leaked.

   Solution: ignore -EFAULT and proceed. It is an application's bug if
   we can't fill infop/stat_addr (in case of VM_FAULT_OOM we have much
   more problems).

3. // wait_task_zombie() continues

	if (p->real_parent != p->parent) {
		// Not taken, it was untraced'ed
		...
	}

	release_task(p);

   we released the task which we shouldn't.

   Solution: check ->real_parent != ->parent before, under tasklist_lock,
   but use ptrace_unlink() instead of __ptrace_unlink() to check ->ptrace.

This patch hopefully solves 2 and 3, the 1st bug will be fixed later, we need
some cleanups in forget_original_parent/reparent_thread.

However, the first race is very unlikely and not critical, so I hope it makes
sense to fix 1 and 2 for now.

4. Small cleanup: don't "restore" EXIT_ZOMBIE unless we know we are not going
   to realease the child.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:51 -07:00
Oleg Nesterov 407af46a96 wait_task_zombie: remove unneeded child->signal check
A zombie must have a valid ->signal, we are going to release it and
__exit_signal() starts with BUG_ON(!sig).

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:51 -07:00
Oleg Nesterov 84eb646b6e handle the multi-threaded init's exit() properly
With or without this patch, multi-threaded init's are not fully supported,
but do_exit() is completely wrong.  This becomes a real problem when we
support pid namespaces.

1. do_exit() panics when the main thread of /sbin/init exits. It should not
   until the whole thread group exits. Move the code below, under the
   "if (group_dead)" check.

   Note: this means that forget_original_parent() can use an already dead
   child_reaper()'s task_struct. This is OK for /sbin/init because

   	- do_wait() from alive sub-thread still can reap a zombie, we iterate
   	  over all sub-thread's ->children lists

   	- do_notify_parent() will wakeup some alive sub-thread because it sends
   	  the group-wide signal

   However, we should remove choose_new_parent()->BUG_ON(reaper->exit_state)
   for this.

2. We are playing games with ->nsproxy->pid_ns. This code is bogus today, and
   it has to be changed anyway when we really support pid namespaces, just
   remove it.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Roland McGrath <roland@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:51 -07:00
Oleg Nesterov d2ee7198cc pi-futex: set PF_EXITING without taking ->pi_lock
It is a bit annoying that do_exit() takes ->pi_lock to set PF_EXITING.  All
we need is to synchronize with lookup_pi_state() which saw this task
without PF_EXITING under ->pi_lock.

Change do_exit() to use spin_unlock_wait().

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:51 -07:00
Jesper Juhl a9022e9cb9 Clean up duplicate includes in kernel/
This patch cleans up duplicate includes in
	kernel/

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:48 -07:00
Laurent Vivier 9ac52315d4 sched: guest CPU accounting: add guest-CPU /proc/<pid>/stat fields
like for cpustat, introduce the "gtime" (guest time of the task) and
"cgtime" (guest time of the task children) fields for the
tasks. Modify signal_struct and task_struct.

Modify /proc/<pid>/stat to display these new fields.

Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Acked-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-15 17:00:19 +02:00
Davide Libenzi b8fceee17a signalfd simplification
This simplifies signalfd code, by avoiding it to remain attached to the
sighand during its lifetime.

In this way, the signalfd remain attached to the sighand only during
poll(2) (and select and epoll) and read(2).  This also allows to remove
all the custom "tsk == current" checks in kernel/signal.c, since
dequeue_signal() will only be called by "current".

I think this is also what Ben was suggesting time ago.

The external effect of this, is that a thread can extract only its own
private signals and the group ones.  I think this is an acceptable
behaviour, in that those are the signals the thread would be able to
fetch w/out signalfd.

Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-20 13:19:59 -07:00
Jonathan Lim f2ab6d8889 Assign task_struct.exit_code before taskstats_exit()
taskstats.ac_exitcode is assigned to task_struct.exit_code in bacct_add_tsk()
through the following kernel function calls:

  do_exit()
    taskstats_exit()
      fill_pid()
        bacct_add_tsk()

The problem is that in do_exit(), task_struct.exit_code is set to 'code' only
after taskstats_exit() has been called.  So we need to move the assignment
before taskstats_exit().

Signed-off-by: Jonathan Lim <jlim@sgi.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-31 01:42:22 -07:00
Oleg Nesterov 247284481c Kill some obsolete sub-thread-ptrace stuff
There is a couple of subtle checks which were needed to handle ptracing from
the same thread group. This was deprecated a long ago, imho this code just
complicates the understanding.

And, the "->parent->signal->flags & SIGNAL_GROUP_EXIT" check in exit_notify()
is not right. SIGNAL_GROUP_EXIT can mean exec(), not exit_group(). This means
ptracer can lose a ptraced zombie on exec(). Minor problem, but still the bug.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-03 15:06:33 -07:00
Rafael J. Wysocki 0c1eecfb34 Freezer: avoid freezing kernel threads prematurely
Kernel threads should not have TIF_FREEZE set when user space processes are
being frozen, since otherwise some of them might be frozen prematurely.
To prevent this from happening we can (1) make exit_mm() unset TIF_FREEZE
unconditionally just after clearing tsk->mm and (2) make try_to_freeze_tasks()
check if p->mm is different from zero and PF_BORROWED_MM is unset in p->flags
when user space processes are to be frozen.

Namely, when user space processes are being frozen, we only should set
TIF_FREEZE for tasks that have p->mm different from NULL and don't have
PF_BORROWED_MM set in p->flags.  For this reason task_lock() must be used to
prevent try_to_freeze_tasks() from racing with use_mm()/unuse_mm(), in which
p->mm and p->flags.PF_BORROWED_MM are changed under task_lock(p).  Also, we
need to prevent the following scenario from happening:

* daemonize() is called by a task spawned from a user space code path
* freezer checks if the task has p->mm set and the result is positive
* task enters exit_mm() and clears its TIF_FREEZE
* freezer sets TIF_FREEZE for the task
* task calls try_to_freeze() and goes to the refrigerator, which is wrong at
  that point

This requires us to acquire task_lock(p) before p->flags.PF_BORROWED_MM and
p->mm are examined and release it after TIF_FREEZE is set for p (or it turns
out that TIF_FREEZE should not be set).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:42 -07:00
Rafael J. Wysocki 8314418629 Freezer: make kernel threads nonfreezable by default
Currently, the freezer treats all tasks as freezable, except for the kernel
threads that explicitly set the PF_NOFREEZE flag for themselves.  This
approach is problematic, since it requires every kernel thread to either
set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't
care for the freezing of tasks at all.

It seems better to only require the kernel threads that want to or need to
be frozen to use some freezer-related code and to remove any
freezer-related code from the other (nonfreezable) kernel threads, which is
done in this patch.

The patch causes all kernel threads to be nonfreezable by default (ie.  to
have PF_NOFREEZE set by default) and introduces the set_freezable()
function that should be called by the freezable kernel threads in order to
unset PF_NOFREEZE.  It also makes all of the currently freezable kernel
threads call set_freezable(), so it shouldn't cause any (intentional)
change of behaviour to appear.  Additionally, it updates documentation to
describe the freezing of tasks more accurately.

[akpm@linux-foundation.org: build fixes]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:02 -07:00
Miloslav Trmac 522ed7767e Audit: add TTY input auditing
Add TTY input auditing, used to audit system administrator's actions.  This is
required by various security standards such as DCID 6/3 and PCI to provide
non-repudiation of administrator's actions and to allow a review of past
actions if the administrator seems to overstep their duties or if the system
becomes misconfigured for unknown reasons.  These requirements do not make it
necessary to audit TTY output as well.

Compared to an user-space keylogger, this approach records TTY input using the
audit subsystem, correlated with other audit events, and it is completely
transparent to the user-space application (e.g.  the console ioctls still
work).

TTY input auditing works on a higher level than auditing all system calls
within the session, which would produce an overwhelming amount of mostly
useless audit events.

Add an "audit_tty" attribute, inherited across fork ().  Data read from TTYs
by process with the attribute is sent to the audit subsystem by the kernel.
The audit netlink interface is extended to allow modifying the audit_tty
attribute, and to allow sending explanatory audit events from user-space (for
example, a shell might send an event containing the final command, after the
interactive command-line editing and history expansion is performed, which
might be difficult to decipher from the TTY input alone).

Because the "audit_tty" attribute is inherited across fork (), it would be set
e.g.  for sshd restarted within an audited session.  To prevent this, the
audit_tty attribute is cleared when a process with no open TTY file
descriptors (e.g.  after daemon startup) opens a TTY.

See https://www.redhat.com/archives/linux-audit/2007-June/msg00000.html for a
more detailed rationale document for an older version of this patch.

[akpm@linux-foundation.org: build fix]
Signed-off-by: Miloslav Trmac <mitr@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Paul Fulghum <paulkf@microgate.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:47 -07:00
Jeff Dike e18eecb8b3 Add generic exit-time stack-depth checking to CONFIG_DEBUG_STACK_USAGE
Add generic exit-time stack-depth checking to CONFIG_DEBUG_STACK_USAGE.

This also adds UML support.

Tested on UML and i386.

[akpm@linux-foundation.org: cleanups, speedups, tweaks]
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:38 -07:00
Balbir Singh 172ba844a8 sched: update delay-accounting to use CFS's precise stats
update delay-accounting to use CFS's precise stats.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-09 18:52:00 +02:00
Ingo Molnar e05606d330 sched: clean up the rt priority macros
clean up the rt priority macros, pointed out by Andrew Morton.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-09 18:51:59 +02:00
Ingo Molnar f64f61145a sched: remove sched_exit()
remove sched_exit(): the elaborate dance of us trying to recover
timeslices given to child tasks never really worked.

CFS does not need it either.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-09 18:51:58 +02:00
Alexey Kuznetsov 778e9a9c3e pi-futex: fix exit races and locking problems
1. New entries can be added to tsk->pi_state_list after task completed
   exit_pi_state_list(). The result is memory leakage and deadlocks.

2. handle_mm_fault() is called under spinlock. The result is obvious.

3. results in self-inflicted deadlock inside glibc.
   Sometimes futex_lock_pi returns -ESRCH, when it is not expected
   and glibc enters to for(;;) sleep() to simulate deadlock. This problem
   is quite obvious and I think the patch is right. Though it looks like
   each "if" in futex_lock_pi() got some stupid special case "else if". :-)

4. sometimes futex_lock_pi() returns -EDEADLK,
   when nobody has the lock. The reason is also obvious (see comment
   in the patch), but correct fix is far beyond my comprehension.
   I guess someone already saw this, the chunk:

                        if (rt_mutex_trylock(&q.pi_state->pi_mutex))
                                ret = 0;

   is obviously from the same opera. But it does not work, because the
   rtmutex is really taken at this point: wake_futex_pi() of previous
   owner reassigned it to us. My fix works. But it looks very stupid.
   I would think about removal of shift of ownership in wake_futex_pi()
   and making all the work in context of process taking lock.

From: Thomas Gleixner <tglx@linutronix.de>

Fix 1) Avoid the tasklist lock variant of the exit race fix by adding
    an additional state transition to the exit code.

    This fixes also the issue, when a task with recursive segfaults
    is not able to release the futexes.

Fix 2) Cleanup the lookup_pi_state() failure path and solve the -ESRCH
    problem finally.

Fix 3) Solve the fixup_pi_state_owner() problem which needs to do the fixup
    in the lock protected section by using the in_atomic userspace access
    functions.

    This removes also the ugly lock drop / unqueue inside of fixup_pi_state()

Fix 4) Fix a stale lock in the error path of futex_wake_pi()

Added some error checks for verification.

The -EDEADLK problem is solved by the rtmutex fixups.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-08 17:23:34 -07:00
Roland McGrath 7bb44adef3 recalc_sigpending_tsk fixes
Steve Hawkes discovered a problem where recalc_sigpending_tsk was called in
do_sigaction but no signal_wake_up call was made, preventing later signals
from waking up blocked threads with TIF_SIGPENDING already set.

In fact, the few other calls to recalc_sigpending_tsk outside the signals
code are also subject to this problem in other race conditions.

This change makes recalc_sigpending_tsk private to the signals code.  It
changes the outside calls, as well as do_sigaction, to use the new
recalc_sigpending_and_wake instead.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: <Steve.Hawkes@motorola.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-23 20:14:12 -07:00
Davide Libenzi fba2afaaec signal/timer/event: signalfd core
This patch series implements the new signalfd() system call.

I took part of the original Linus code (and you know how badly it can be
broken :), and I added even more breakage ;) Signals are fetched from the same
signal queue used by the process, so signalfd will compete with standard
kernel delivery in dequeue_signal().  If you want to reliably fetch signals on
the signalfd file, you need to block them with sigprocmask(SIG_BLOCK).  This
seems to be working fine on my Dual Opteron machine.  I made a quick test
program for it:

http://www.xmailserver.org/signafd-test.c

The signalfd() system call implements signal delivery into a file descriptor
receiver.  The signalfd file descriptor if created with the following API:

int signalfd(int ufd, const sigset_t *mask, size_t masksize);

The "ufd" parameter allows to change an existing signalfd sigmask, w/out going
to close/create cycle (Linus idea).  Use "ufd" == -1 if you want a brand new
signalfd file.

The "mask" allows to specify the signal mask of signals that we are interested
in.  The "masksize" parameter is the size of "mask".

The signalfd fd supports the poll(2) and read(2) system calls.  The poll(2)
will return POLLIN when signals are available to be dequeued.  As a direct
consequence of supporting the Linux poll subsystem, the signalfd fd can use
used together with epoll(2) too.

The read(2) system call will return a "struct signalfd_siginfo" structure in
the userspace supplied buffer.  The return value is the number of bytes copied
in the supplied buffer, or -1 in case of error.  The read(2) call can also
return 0, in case the sighand structure to which the signalfd was attached,
has been orphaned.  The O_NONBLOCK flag is also supported, and read(2) will
return -EAGAIN in case no signal is available.

If the size of the buffer passed to read(2) is lower than sizeof(struct
signalfd_siginfo), -EINVAL is returned.  A read from the signalfd can also
return -ERESTARTSYS in case a signal hits the process.  The format of the
struct signalfd_siginfo is, and the valid fields depends of the (->code &
__SI_MASK) value, in the same way a struct siginfo would:

struct signalfd_siginfo {
	__u32 signo;	/* si_signo */
	__s32 err;	/* si_errno */
	__s32 code;	/* si_code */
	__u32 pid;	/* si_pid */
	__u32 uid;	/* si_uid */
	__s32 fd;	/* si_fd */
	__u32 tid;	/* si_fd */
	__u32 band;	/* si_band */
	__u32 overrun;	/* si_overrun */
	__u32 trapno;	/* si_trapno */
	__s32 status;	/* si_status */
	__s32 svint;	/* si_int */
	__u64 svptr;	/* si_ptr */
	__u64 utime;	/* si_utime */
	__u64 stime;	/* si_stime */
	__u64 addr;	/* si_addr */
};

[akpm@linux-foundation.org: fix signalfd_copyinfo() on i386]
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 08:29:36 -07:00
Sukadev Bhattiprolu e713d0dab2 attach_pid() with struct pid parameter
attach_pid() currently takes a pid_t and then uses find_pid() to find the
corresponding struct pid.  Sometimes we already have the struct pid.  We can
then skip find_pid() if attach_pid() were to take a struct pid parameter.

Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: <containers@lists.osdl.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 08:29:35 -07:00
Eric Dumazet 6eaeeaba39 getrusage(): fill ru_inblock and ru_oublock fields if possible
If CONFIG_TASK_IO_ACCOUNTING is defined, we update io accounting counters for
each task.

This patch permits reporting of values using the well known getrusage()
syscall, filling ru_inblock and ru_oublock instead of null values.

As TASK_IO_ACCOUNTING currently counts bytes counts, we approximate blocks
count doing : nr_blocks = nr_bytes / 512

Example of use :
----------------------
After patch is applied, /usr/bin/time command can now give a good
approximation of IO that the process had to do.

$ /usr/bin/time grep tototo /usr/include/*
Command exited with non-zero status 1
0.00user 0.02system 0:02.11elapsed 1%CPU (0avgtext+0avgdata 0maxresident)k
24288inputs+0outputs (0major+259minor)pagefaults 0swaps

$ /usr/bin/time dd if=/dev/zero of=/tmp/testfile count=1000
1000+0 enregistrements lus
1000+0 enregistrements écrits
512000 octets (512 kB) copiés, 0,00326601 seconde, 157 MB/s
0.00user 0.00system 0:00.00elapsed 80%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+3000outputs (0major+299minor)pagefaults 0swaps

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 08:29:34 -07:00
Oleg Nesterov 10ab825bde change kernel threads to ignore signals instead of blocking them
Currently kernel threads use sigprocmask(SIG_BLOCK) to protect against
signals.  This doesn't prevent the signal delivery, this only blocks
signal_wake_up().  Every "killall -33 kthreadd" means a "struct siginfo"
leak.

Change kthreadd_setup() to set all handlers to SIG_IGN instead of blocking
them (make a new helper ignore_signals() for that).  If the kernel thread
needs some signal, it should use allow_signal() anyway, and in that case it
should not use CLONE_SIGHAND.

Note that we can't change daemonize() (should die!) in the same way,
because it can be used along with CLONE_SIGHAND.  This means that
allow_signal() still should unblock the signal to work correctly with
daemonize()ed threads.

However, disallow_signal() doesn't block the signal any longer but ignores
it.

NOTE: with or without this patch the kernel threads are not protected from
handle_stop_signal(), this seems harmless, but not good.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:53 -07:00
Eric W. Biederman 49d769d52e Change reparent_to_init to reparent_to_kthreadd
When a kernel thread calls daemonize, instead of reparenting the thread to
init reparent the thread to kthreadd next to the threads created by
kthread_create.

This is really just a stop gap until daemonize goes away, but it does
ensure no kernel threads are under init and they are all in one place that
is easy to find.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:53 -07:00
Randy Dunlap e63340ae6b header cleaning: don't include smp_lock.h when not used
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:07 -07:00
Roland McGrath 7324328446 Return EPERM not ECHILD on security_task_wait failure
wait* syscalls return -ECHILD even when an individual PID of a live child
was requested explicitly, when security_task_wait denies the operation.
This means that something like a broken SELinux policy can produce an
unexpected failure that looks just like a bug with wait or ptrace or
something.

This patch makes do_wait return -EACCES (or other appropriate error returned
from security_task_wait() instead of -ECHILD if some children were ruled out
solely because security_task_wait failed.

[jmorris@namei.org: switch error code to EACCES]
Signed-off-by: Roland McGrath <roland@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:57 -07:00
Eric W. Biederman 14e9d5730a [PATCH] pid: Properly detect orphaned process groups in exit_notify
In commit 0475ac0845 when converting the
orphaned process group handling to use struct pid I made a small
mistake.  I accidentally replaced an == with a !=.

Besides just being a dumb thing to do apparently this has a bad side
effect.  The improper orphaned process group detection causes kwin to
die after a suspend/resume cycle.

I'm amazed this patch has been around as long as it has without anyone
else noticing something funny going on.

And the following people deserve credit for spotting and helping
to reproduce this.

Thanks to: Sid Boyce <g3vbv@blueyonder.co.uk>
Thanks to: "Michael Wu"

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-29 08:16:23 -07:00