Commit Graph

363 Commits

Author SHA1 Message Date
Sascha Hauer 9eedbdf1b4 MXC: Add a digital audio multiplexer driver
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14 10:30:39 +01:00
Sascha Hauer d8d982b1b2 i.MX3: Add sound (ssi) resources
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14 10:30:38 +01:00
Sascha Hauer 4f43c2ed21 pcm043: Add NAND support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14 10:30:19 +01:00
Juergen Beisert fcebfc8d90 MXC NFC: Fix NFCs address area on i.MX35
The address area of the NFC in the i.MX35 silicon is much larger than 4k.

Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14 10:30:19 +01:00
Juergen Beisert 9e0afdf8f3 MXC NFC: Add the clock resource to support NFC in i.MX35
Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14 10:30:18 +01:00
Valentin Longchamp 04ea3c8019 mx31moboard: camera support
We have two mt9t031 cameras that have a muxed bus on the robot.
Only one is currently initialized because of limitations in
soc_camera that should be removed later.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14 10:29:15 +01:00
Valentin Longchamp 4dd7129345 mx31moboard: initialize ipu device for all the boards
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14 10:29:15 +01:00
Valentin Longchamp 65da9791cb mx31moboard: SPI and MC13783 voltage regulator support
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14 10:29:14 +01:00
Valentin Longchamp 10949fff62 mx31moboard: support for pin linked for battery presence check
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14 10:29:14 +01:00
Valentin Longchamp 421bf82e99 mx31moboard: serial port fix
We get rid of CTS/RTS lines on uart0 on our platform.
This is the port we use as main kernel console. We do not
want it to be blocking because of CTS/RTS signals, not allowing
the system to boot or print messages.

However we often use it with a bluetooth module needing CTS/RTS
lines as backup login in case of trouble. To be able to use it,
we assert CTS low so that the module can always send chars.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14 10:29:14 +01:00
Alberto Panizzo 2097abcb8c Armadillo500 Add support for Seiko Instruments S-35390A rtc over i2c.
The RTC chip Seiko Instruments S-35390A is connected to the Application
Processor over the second bus i2c with the hard coded address 0x30.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14 10:29:13 +01:00
Alberto Panizzo e9a6c5d0c8 Armadillo500 Add i2c second bus support.
This add pin allocation an device registration for the
second bus i2c.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14 10:29:12 +01:00
Alberto Panizzo 07299ca323 Armadillo500 Correct bus length for SMSC9118 on board chip.
Armadillo500 Correct bus length for SMSC9118 on board chip.

The SMSC9118 network chip is connected to the data bus with a 16 bit
interface, not 32 as early suggested.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14 10:29:12 +01:00
Alberto Panizzo e33c049cb5 Armadillo500 Add support for onboard GPIO Buttons.
There are two low active Buttons on boards.
This patch connect those to the Input Subsystem over gpio-keys driver.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14 10:29:12 +01:00
Daniel Mack 24fb84222e ARM: MX3: Add pad config for MMC pins on lilly-db
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14 10:29:12 +01:00
Daniel Mack 50f349e9fc ARM: MX3: add support for mc13783 on lilly-db
The chip is actually located on the module, not on the base board. But
other base boards might add more SPI devices, so the spi_board_info
struct must be separated from the module code.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14 10:29:11 +01:00
Daniel Mack 3ea2e1a4b7 ARM: MX3: add SPI functions for lilly1131-db
This adds support for the two SPI busses found on the lilly1131 module.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14 10:29:11 +01:00
Daniel Mack 95b7d4a8ca ARM: MX3: remove I2C defintions from mx31lilly.c
The module does not use these pins for I2C but for SPI.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14 10:29:11 +01:00
Valentin Longchamp 679bfef0e3 MXC: fix reset for mx31, mx35 and mx27 SoCs
The clock name for the watchdog devices was not set consistently
with mx21 on these platforms, resulting in the reset not to work.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-10-13 10:24:10 +02:00
Guennadi Liakhovetski d9e8b88478 fix pcm037_eet compilation with the new SPI driver
Fix pcm037_eet compilation with the new imx SPI driver by unifying
platform device names.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-10-13 10:24:09 +02:00
Guennadi Liakhovetski 324c1aa3df fix compilation of i.MX31 platforms
mxc_iomux_v3_init() is defined in arch/arm/plat-mxc/iomux-v3.c, which is
not linked for i.MX31 and produces an undefined reference error. Fix this
by building the offending code only for i.MX35.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-10-13 10:24:08 +02:00
Russell King 87d721ad7a Merge branch 'master' into devel 2009-09-12 12:04:37 +01:00
Valentin Longchamp 2718c15c5f mx31moboard: two GPIOS are used to reset other microcontrolers on the robot
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:41:13 +02:00
Valentin Longchamp 8b1a540c24 mx31moboard: initialize 4 input gpios for mx31moboard
These gpios are exported to userspace and are here to be used as
a selector

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:41:11 +02:00
Valentin Longchamp 77aa561db1 mx31moboard: support for the 4 leds used on mx31moboard
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:41:10 +02:00
Luotao Fu e0fd4db372 pcm037: mux configuration for predefined gpio line
Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
2009-08-14 12:41:08 +02:00
Luotao Fu 8d5c1ed3f6 pcm043: mux configuration for predefined gpio line
Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
2009-08-14 12:41:06 +02:00
Sascha Hauer 3fd2691a1d MX31 Fix spi clock names
Fix the SPI clock names to match the device names.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:41:03 +02:00
Sascha Hauer 7bc07ebc7d mx3x: Fixup USB base addresses
The i.MX31 and the i.MX35 have different USB base addresses. Adjust
the resources accordingly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:41:01 +02:00
Sascha Hauer 547270a3b9 i.MX35 clock support: Add USB clocks
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:40:57 +02:00
Sascha Hauer d37ba97d49 MX31: add spi controller devices/resources
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:40:54 +02:00
Valentin Longchamp 88b0564717 mx31moboard: move usb otg support back to moboard common file
since all boards finally have this device

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:40:50 +02:00
Valentin Longchamp b23f1534bb mx31moboard: added usb xcvr reset for mx31moboard
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:40:49 +02:00
Sascha Hauer cf983c93ae fix mx35 wrong clock
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:40:44 +02:00
Sascha Hauer 6134b2cbb0 iomux-v3: Allow for a runtime base address
also, check for a valid pad_ctrl_ofs before changing the
pad control register.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:40:41 +02:00
Daniel Mack c372a5cf4c ARM: MX3: add ckil clock
The CKIL clock source is used by the upcoming RTC driver, so we need
to export it.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:40:38 +02:00
Sascha Hauer cf87a6e2fe ARM: mxc: Fix i2c_board_info definitions
Fix i2c_board_info definitions - we were defining the 'type' field
of these structures twice since the first argument of I2C_BOARD_INFO
sets this field.  Move the second definition into I2C_BOARD_INFO().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
2009-08-14 12:40:37 +02:00
Valentin Longchamp 563abb4be1 mx31moboard: invert sdhc ro signal sense
Small confusion with our hardware engineer, the WP signal (RO) is
active low on our boards, the signal has to inverted.

This is a pretty straightforward patch, it could even go to -rc,
but if not, then push it for 2.6.32.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:33:23 +02:00
Sascha Hauer 6558f985a1 ehci mxc: Fix clocks
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:11:11 +02:00
Daniel Mack c13a482c43 MX3: Add USB platform devices and resources
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:11:11 +02:00
Sascha Hauer 91bf9a2566 pcm037: Add support for SJA1000 on baseboard
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:11:09 +02:00
Sascha Hauer 3f4f54b4f0 mx3: Codingstyle: Let the compiler count arrays
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:10:55 +02:00
Sascha Hauer c5aa0ad0c5 mxc: turn to soc specific init_irq functions
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:10:54 +02:00
Sascha Hauer be124c9427 system.c: runtime base address
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:10:51 +02:00
Sascha Hauer 8db5d1a64d MXC: pass base/irq to mxc_timer_init
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:10:51 +02:00
Guennadi Liakhovetski ff46a474ca mx3: Fix double pin allocation in pcm037_eet.c
SPI pins are now allocated in pcm037.c, remove them from EET.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-31 16:38:03 +02:00
Guennadi Liakhovetski 574ec547c7 ARM: add support for the EET board, based on the i.MX31 pcm037 module
The "EET" variant of the pcm037 board has an OLED display, using a S6E63D6
display controller on the first SPI interface, using GPIO57 as a chip-select
for it. S6E63D6 is initialised in the boot-loader, so we only have to take care
of the LCD. EET also adds several buttons and LEDs on GPIOs. This patch adds a
"pcm037_variant=" kernel command line parameter to specify at boot-time which
board the kernel is running on, default is "pcm970", specify "eet" for the EET
board.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-23 14:25:26 +02:00
Guennadi Liakhovetski 32c1ad9ab2 pcm037: add MT9T031 camera support
Add support for the MT9T031 CMOS camera sensor from Aptina to the PCM037
board. Also add two I2C iomux pin definitions, needed for pcm037. Also
remove now unneeded #ifdef CONFIG_I2C_IMX.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-23 14:25:26 +02:00
Alberto Panizzo 0c8bad6a26 Armadillo 500 add NAND flash device support (resend).
Since recent mxc_nand driver fixes from linux-mtd this patch
add support for ST NAND02GW3B2CN6 (2k pages flash) placed on the armadillo 500
motherboard.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-23 14:25:26 +02:00
Alberto Panizzo c3a9c7f53a ARM MXC: Armadillo 500 add NOR flash device support (resend).
This patch add support for NOR flash mapping through the physmap driver.
The purpose is to maintain the original Atmark partition model.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-23 14:25:25 +02:00
Huang Weiyi bc33dc5ae7 mx31: remove duplicated #include
Remove duplicated #include in arch/arm/mach-mx3/devices.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-23 14:25:25 +02:00
Linus Torvalds 2cf4d4514d Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
  MAINTAINERS: EB110ATX is not ebsa110
  MAINTAINERS: update Eric Miao's email address and status
  fb: add support of LCD display controller on pxa168/910 (base layer)
  [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
  [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
  [ARM] 5544/1: Trust PrimeCell resource sizes
  [ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
  [ARM] pxa/sharpsl_pm: drop set_irq_type calls
  [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
  [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
  [ARM] sa1100: remove unused collie_pm.c
  [ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
  [ARM] 5550/1: Add default configure file for w90p910 platform
  [ARM] 5549/1: Add clock api for w90p910 platform.
  [ARM] 5548/1: Add gpio api for w90p910 platform
  [ARM] 5551/1: Add multi-function pin api for w90p910 platform.
  [ARM] Make ARM_VIC_NR depend on ARM_VIC
  [ARM] 5546/1: ARM PL022 SSP/SPI driver v3
  ARM: OMAP4: SMP: Update defconfig for OMAP4430
  ARM: OMAP4: SMP: Enable SMP support for OMAP4430
  ...
2009-06-14 13:42:43 -07:00
Russell King 2d8d24935d Merge branch 'mxc-master' of git://git.pengutronix.de/git/imx/linux-2.6 into devel 2009-06-08 19:26:28 +01:00
Rabin Vincent 6b4bfb87b6 mx[23]: don't put clock lookups in __initdata
Remove the __initdata annotation for the clock lookups, since they will
be needed when loading modules which use clk_get().

Tested-by: Agustín Ferrín Pozuelo <gatoguan-os@yahoo.com>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-03 11:51:06 +02:00
Fabio Estevam aefa1c6e7b MX35: Add basic support for MX35PDK board
Add basic support for MX35PDK board (www.freescale.com/imx35pdk).

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-03 11:44:50 +02:00
Daniel Mack 8d9fb9bb89 Support for lilly-1131 modules and baseboards [v2]
On Thu, May 28, 2009 at 08:42:23PM +0200, Sascha Hauer wrote:
> > > Mail-Followup-To: Daniel Mack <daniel@caiaq.de>,
> > > 	linux-arm-kernel@lists.arm.linux.org.uk
> >
> > ... which causes my mutt to only reply to the list.
>
> Ah, ok. /me hacking in muttrc... Does it work now?

Yep :)

> >  	mxc_register_device(&mxc_uart_device0, &uart_pdata);
> > +	mxc_register_device(&mxc_uart_device1, &uart_pdata);
> > +	mxc_register_device(&mxc_uart_device2, &uart_pdata);
>
> What about the RXD3/TXD3 pins?

You're right - I got the IOMUX tables wrong and thought UART0 pins are
selected unconditionally. But as it turns out TXD1/RXD1 is for UART0
(mxc_uart_device0), TXD2/RXD2 for UART1 (mxc_uart_device1) etc.

Below is a new patch.

Thanks,
Daniel

From e7eb5fa0fed09d667a4b2f168fe466e2cc645abb Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Wed, 27 May 2009 12:22:51 +0200
Subject: [PATCH] ARM: MX3: add two more UARTs to lilly-1131-db

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-02 19:28:36 +02:00
Russell King a22f277bba [ARM] Kconfig: remove 'default n'
Kconfig entries default to n, so there's no need for this to be
explicitly specified.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-31 15:12:25 +01:00
Valentin Longchamp 0573cb5f45 mx31: correct csi_clk parent (v2)
changes since v1: we now check if the parent configuration bit was
changed since reset and change the parent when needed.

csi_clk parent was defined with ahb_clk. However, according to the
m31 reference manual, it should be serial_pll_clk.

Guennadi always used a 20 MHz clock that was by chance changed to
a 45 MHz that fits in the mt9t031 spec. Now the clocks are computed
and output correctly (measured on oscillo).

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-28 17:20:53 +02:00
Fabio Estevam 0b0ef44295 MX3: Add missing entry in devices.h
Add missing mxc_rnga_device entry in devices.h (mxc-master tree).

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-28 17:19:23 +02:00
Alberto Panizzo 4e0f088106 ARM MXC: Atmark Armadillo 500 board support.
On Mon, 25 May 2009 18:33:28 +0200
Valentin Longchamp <valentin.longchamp@epfl.ch> wrote:

> Hello,
>
> I have updated my mxc git tree and given a compilation spin to your
> board support and I have comments. See below.
>

>
> What's the point of declaring this new function, if all it does is
> calling the already existing one ? Furthermore, in the current
> mxc-master tree, mxc_map_io() does not exist anymore, it should be
> mx31_map_io (this breaks compilation for your board).
>

This patch solve those two issues. Until now i based my patches to
vanilla tree. This evening I cloned the mxc-master tree so i could
update the armadillo 500 support within recent platform changes.

The patch:

From e986a8dc262e5292350d95bf65ead75baf3272d7 Mon Sep 17 00:00:00 2001
From: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Date: Mon, 25 May 2009 22:24:03 +0200
Subject: [PATCH] Armadillo 500 removing useless function armadillo5x0_map_io
and use machine specific io mapping

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-26 12:34:11 +02:00
Daniel Mack 4193d2d2d7 ARM: MX3: add I2C support for lilly-1131
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-26 12:31:55 +02:00
Daniel Mack 38160e0b01 ARM: MX3: add NOR flash support for lilly-1131
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-26 12:31:37 +02:00
Daniel Mack b99238721b ARM: MX3: add framebuffer support for lilly1131-db
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-26 12:31:28 +02:00
Daniel Mack d0b1eabc7b ARM: MX3: add MMC suuport for lilly1131-db
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-26 12:31:19 +02:00
Daniel Mack cbaa6ca1f5 ARM: MX3: add lilly-1131 ethernet support
This adds support for the SMSC911x chip found on the lilly-1131 module.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-26 12:31:13 +02:00
Daniel Mack 1bc34f7964 ARM: MX3: add skeleton for lilly-1131 development board
Support code for lilly-1131 is implemented in a module/baseboard
fashion. All code specific to peripherals found on the development board
will go to this file.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-26 12:30:40 +02:00
Daniel Mack 65b1aa13f2 ARM: MX3: basic support for lilly-1131 board
This patch adds basic support for INCO startec's LILLY-1131 iMX31 based
modules. The module needs a baseboard support to work which will be
added in the next patch.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-26 12:30:32 +02:00
Magnus Lilja 2b0c3677bf i.MX31: Add support for LAN9217 on PDK debug board.
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-19 21:04:41 +02:00
Alberto Panizzo 5e9145edcc Atmark Armadillo 500 board support.
Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-19 11:24:57 +02:00
Magnus Lilja 135cad366b i.MX31: Add support for the CPLD on PDK Debug board.
The i.MX31 PDK consists of several boards, one of them is a debug
board containing a CPLD which controls some debug leds, switch
buttons, an interrupt chip and an Ethernet controller.
This patch adds support for detecting if the PDK board is present
(during boot) and adds the interrupt chip to the kernel.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-18 08:36:27 +02:00
Magnus Lilja 153fa1d8c6 i.MX31: Restructure UART setup for PDK board.
Restructure UART pin setup in preparation for adding other pins
in later patches.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-16 16:25:04 +02:00
Alberto Panizzo 92ab0a5015 ARM MXC: Make-sure-ipg_per_clk-is-generated-by-ipg_clk-and-not-usb_pll
From ff1fd9d7015d9b9ad3e0df2016d0415e2719747c Mon Sep 17 00:00:00 2001
From: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Date: Fri, 15 May 2009 17:21:21 +0200
Subject: [PATCH] Make sure ipg_per_clk is generated by ipg_clk and not usb_pll

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-16 16:19:02 +02:00
Magnus Lilja 183c7fff50 i.MX31: Add NAND device driver for Litekit board.
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-16 16:17:40 +02:00
Valentin Longchamp 9c70e227e0 mx31: add camera device
This adds the camera device based on Guennadi's soc_camera architecture
for the mx31.

The proposed init by Guennadi was removed and must be implemented in the
board init file as it contains a lot of board specific info (memory
size, clock speed).

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:21:16 +02:00
Valentin Longchamp 03c13ecc0d mx31moboard: add support for usb OTG device (v3)
This is used on all board of our system, so again this is done in the
mx31moboard.c file.

changes since v2: call to gpio_request added in platform code, and
moved device initialization in baseboard files.

changes since v1: pins are claimed in another patch

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:21:02 +02:00
Sascha Hauer 4f163eb881 mx31: calls to gpio_request moved into platform code
In order to use the gpiolib, we now have to call gpio_request in
the plaform code since it is not done in iomux code anymore.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:20:52 +02:00
Valentin Longchamp ef754d6358 mx31: remove gpio_request calls from iomux code
Since iomux code is not directly related to gpio on mx31, the calls
to gpio_request are removed from iomux.c file.

These calls have to be done in platform initialization files. The
name of the singe pin call for iomux is also changed to
mxc_iomux_alloc_pin.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:20:40 +02:00
Sascha Hauer 35c82da0bf MXC qonq: mxc_map_io is now mx31_map_io
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:20:34 +02:00
Guennadi Liakhovetski eb05bbeb65 ARM: add USB device support to pcm037
Add OTG device definition and resources to i.MX31 and a pure USB device mode
support to the pcm037 board.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:19:50 +02:00
Magnus Lilja 3211705f76 i.MX31: Add ethernet support to i.MX31 Litekit board.
This patch adds the SMSC platform device to the Litekit board.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:18:36 +02:00
Magnus Lilja a854b8ab98 i.MX31: Add UART1 device to Litekit board.
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:18:08 +02:00
Valentin Longchamp 45b131a78c mx31moboard: add sdhc support (v3)
This support both sdhc1 and sdhc2 with WP and CD for the marxbot and
devboard mx31moboard baseboards.

sdhc2 is present on both, but is not directly included in the
mx31moboard file because a third baseboard (not supported yet) without
sdhc2 is planned.

Changes since v1: removed pin initialization from init/exit function and
taken different comments into account

Changes since v2: pin initialiation now is done in another patch for all
current mx31moboard pins

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:17:57 +02:00
Valentin Longchamp 4ec6ecc778 mx31moboard: add i2c support (v2)
Changes since v1: all the pins needed for the drivers are claimed in
another patch

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:17:44 +02:00
Valentin Longchamp 56c7a45bee mx31moboard: setup all pins (v2)
As suggested by Sascha, here we setup all the pins that we are using in
the current (and currently reviewed) drivers for mx31moboard system.

changes since v1: changed I2C1 pin names

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:17:35 +02:00
Alan Carvalho de Assis 45001e92d0 i.MX31: Add hw-random for RNGA
This hw-random driver add support to RNGA hardware found
on some i.MX processors.

Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:17:16 +02:00
Valentin Longchamp 220bbcea27 mx31moboard: clean-up of board support
Various improvements (includes in alphabetical order, platform devices
declaration order change, ...)

The pins now are claimed in a single function call from a main table for
every board for a better clarity and to adopt the current agreement for
mx31 devices.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:17:07 +02:00
Guennadi Liakhovetski a8df0ee8d8 ARM: framebuffer support for pcm037
Add support for a QVGA Sharp LCD on pcm037.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:16:12 +02:00
Sascha Hauer cd4a05f9df MXC: rename mxc_map_io to architecture specific versions
This allows us to have more mapping functions for more than one
i.MX architecture in the kernel. As this is the earliest board
specific hook we have, also use it to set the cpu type.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:15:37 +02:00
Sascha Hauer 13e9f61235 pcm037: Add support for UART2
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:15:33 +02:00
Sascha Hauer 76b6ea0aaa MX35: Fix IPU/Framebuffer clock names
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:15:29 +02:00
Sascha Hauer dddd4a493d pcm037: add SDHC card detection
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:15:26 +02:00
Sascha Hauer 01ac7d584d pcm037: setup all pins at once and not in init functions
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:15:21 +02:00
Sascha Hauer d16caf69ce i.MX35 clock support: remove automotive path
It is no longer present in newer cores. Unfortunately Freescale decided
to put the bit which decides between automotive clock path and consumer
clock path in the automotive clock path direction. With current code we
cannot detect the core revision, so just remove automotive path completely.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:15:13 +02:00
Sascha Hauer 54df526819 [ARM] MX35: Add PCM043 board support
The PCM043 is a i.MX35 based board from Phytec also known as the
phyCORE-i.MX35.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:15:08 +02:00
Sascha Hauer bca6ef1e53 MXC: Add iomux support for MX35 SoCs
This iomux is called iomux-v3 in the tree because it is the third known
incarnation of MXC iomuxers. It is not only found on the MX35 but also
on the MX51 and probably others.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:14:56 +02:00
Mark Brown 0ac402fdaa mx31ads: Mark as having full regulatoion constraints with 1133-EV1 board
This allows the regulator API to power off unused regulators at the end
of init.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-16 13:03:56 +02:00
Mark Brown 132d3f950e mx31ads: Depend on all the WM8350 core dependencies for WM1133-EV1 board
Otherwise we'd need massive ifdefs in the code.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-16 13:03:56 +02:00
Ilya Yanok 248ca85f01 qong: remove AIPS[12] mappings from machine-specific iotable
AIPS[12] are no mapped from generic MX3 code so we don't need to
map them from machine-specific map_io function anymore.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2009-04-16 12:57:15 +02:00
Mark Brown 9070e7afb8 mx31ads: imoux pins should be passed in as unsigned int
To match the mxc_iomux_setup_multiple_pins() prototype.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-16 12:57:15 +02:00
Sascha Hauer f8e5143be7 pcm037 board support: Fix eth interrupt gpio setting
gpio_direction_input needs the gpio number, not the pin description.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-16 12:57:13 +02:00
Guennadi Liakhovetski b71df97a3f V4L/DVB (11349): mx3-camera: adapt the clock definition and the driver to the new clock naming
With the i.MX31 transition to clkdev clock names have changed, but mistakenly
the "mx3-camera.0" has been registered with a non-NULL connection ID, which is
not necessary, since this is the only clock, used by the capture interface
driver. Fix the clock definition and the driver to use NULL as a connection ID.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06 21:43:58 -03:00
Steve Glendinning 4353318ed5 arm: convert pcm037 platform to use smsc911x
Updated to also specify SMSC911X_FORCE_INTERNAL_PHY, as the external phy
detection hardware strap is incorrectly pulled high on this platform.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-02 18:21:15 +01:00
Ilya Yanok 148854c65e qong: basic support for Dave/DENX QongEVB-LITE board
This patch adds basic support for Dave/DENX QongEVB-LITE i.MX31-based
board. It includes support for clocks initialization, UART1, NOR-flash,
FPGA-attached NAND flash and DNET ethernet controller (inside FPGA).

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:35:05 +01:00
Sascha Hauer f2cb641f56 pcm037: Add sdhc support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:38 +01:00
Sascha Hauer 2adc1d654e MX31: Add sdhc resources/platform devices
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:37 +01:00
Sascha Hauer 9eb2eb8c40 MX31 clkdev support
This patch adds clkdev support for i.MX31. This is done in a
similar way done previously for i.MX27

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:32 +01:00
Sascha Hauer fb4416ad61 [ARM] MX31: Move static virtual mappings of AIPS1/2 to common file
On MX31 we can't do much without mapping the AIPS1/2 register space.
Move these mappings from individual boards to plat-mxc/mm.c

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:30 +01:00
Sascha Hauer cb88214d72 [ARM] MX31/MX35: Add l2x0 cache support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:29 +01:00
Sascha Hauer 9536ff3361 [ARM] MX35 devices support
The i.MX35 basically features the same peripherals as the i.MX31 with
some differences:

- The i.MX35 has a FEC ethernet controller
- The NAND controller base addresses are different
- The i.MX35 has only 3 UARTs

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:28 +01:00
Sascha Hauer 2cb536d13c [ARM] MX35: add clock support
This patch adds clock support for i.MX35 SoCs. We do not support setting
of clock rates yet, but most interesting clock rates should be reported.
I couldn't test all clock rates and the datasheet contains some obvious
bugs, so expect some bugs in this code.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:28 +01:00
Sascha Hauer cb8ebb0223 [ARM] add i.MX35 build support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:27 +01:00
Sascha Hauer 198016e1b1 [ARM] MXC: add cpu_is_ macros
We had hardcoded cpu_is_ macros for mxc architectures till now. As we
want to run the same kernel on i.MX31 and i.MX35 this patch adds cpu_is_
macros which expand to 0 or 1 if only one architecture is compiled in and
only check for the cpu type if more than one architecture is compiled
in.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:26 +01:00
Valentin Longchamp ca489f8e4a mx31: add dma and fb devices
This adds the dma (ipu_dma) and fb devices for the mx31 for which drivers now are
available.

v2: merge the ipu and fb device in the same patch as suggested by Sascha

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:22 +01:00
Valentin Longchamp e00f0b4a93 mx31moboard: initial support for various baseboards
This enables our mx31moboard to be used on the different baseboards that
we are developping according to the application needs. There are not
many differences between the boards for now, but when other peripherals
are available for mx31 the differences are going to grow.

v2: takes Sascha's comments into account

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:21 +01:00
Holger Schurig 6bbdbf2f95 arm/imx: Kconfig beautification
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:18 +01:00
Sascha Hauer 87bbb19721 [ARM] mxc: add missing include
include devices.h from devices.c to avoid inconsistencies and to fix
sparse warnings

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:17 +01:00
Sascha Hauer 792067507b [ARM] PCM037 Board: Add I2C support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:15 +01:00
Mark Brown fe7316bff1 mx31ads: Initial support for Wolfson Microelectronics 1133-EV1 module
The i.MX31ADS supports pluggable PMU modules, including the WM835x based
Wolfson Microelectronics 1133-EV1. These boards provide power, audio,
RTC and watchdiog services to the system. This patch adds initial support
for those boards in I2C mode.

Currently support is limited by the available support for the features
of the i.MX31 in the mainline kernel.  Some further work will be needed
once other PMU modules are supported and once there is SPI support.
Many of the regulator constraints will be sharable with other PMU
boards.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:05 +01:00
Valentin Longchamp bab389c875 pcm037: use of new iomux implementation
This was only compilation tested.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:04 +01:00
Valentin Longchamp 63d976672e mx31pdk: use of new iomux implementation
This was only compilation tested.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:03 +01:00
Valentin Longchamp 945c10b87c mx31ads: use of new iomux implementation
This was only compilation tested.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:02 +01:00
Valentin Longchamp bfbc6a1fc1 mx31moboard: use of new iomux implementation
This example takes advantage of the possibility to use tables of iomux
configs.
This is inspired from mx1-mx2 iomux code. It allows a better code
readability.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:01 +01:00
Valentin Longchamp b7222631c3 mx31: rework of iomux support
This new implemenatation avoids that two physical pins are claimed by
the same driver (also with the the gpr hardware modes).
The gpio kernel lib is also called when a capable gpio pin is assigned
its gpio function.
The mxc_iomux_mode function is still here for backward compatibility but
should not be used anymore.

V2:

In the precendent revision, the iomux code was claiming a pin when its
hardware mode was changed. This was uncorrect: when the hardware mode is
changed, the pin must still be claimed through the iomux.

In order to have a pin working in mode hw2, we must fist issue the
mxc_iomux_set_gpr call and then the corresponding mxc_iomux_mode calls
with the FUNC mode (usually done with mxc_iomux_setup_multiple_pins).
The reverse calls must be done to fee the pins.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:00 +01:00
Mark Brown 8b785b9dfb mx31ads: Make unexported data static
Keeps sparse happy.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:33:57 +01:00
Mark Brown 39d1dc068b mx31: Add device definitions for the i.MX3x I2C controllers
The i.MX I2C driver has not yet been merged into mainline but it is
near to that and the device defintions don't depend directly on it
so we can add the devices now.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:33:56 +01:00
Sascha Hauer e65fb0099f [ARM] MXC: remove _clk suffix from clock names
The context makes it clear already that these are clocks, so there's
no need for such a suffix. This patch only changes the clocks actually
used in the tree. The remaining clocks are renamed in the subsequent
architecture specific patches.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:33:48 +01:00
Sascha Hauer 30c730f8f9 [ARM] MXC: rework timer/clock initialisation
- rename mxc_clocks_init to architecture specific versions. This
  allows us to have more than one architecture compiled in.
- call mxc_timer_init from clock initialisation instead from board
  code

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:33:47 +01:00
Sascha Hauer a2865197a5 [ARM] MXC: Use a single function for decoding a PLL
We had 3 versions of this function in clock support for MX1/2/3
Use a single one instead. I picked the one from the MX3 as it seems
to calculate more accurate as the other ones. Also, on MX27 and MX31 mfn
can be negative, this hasn't been handled correctly on MX27 since now.

This patch has been tested on MX27 and MX31 and produces the same clock
frequencies for me.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:33:46 +01:00
Russell King 80b02c172b [ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, pxa, s3c
arch/arm/mach-at91/at91cap9.c:337: error: 'NR_AIC_IRQS' undeclared here (not in a function)
arch/arm/mach-at91/at91rm9200.c:301: error: 'NR_AIC_IRQS' undeclared here (not in a function)
arch/arm/mach-at91/at91sam9260.c:351: error: 'NR_AIC_IRQS' undeclared here (not in a function)
arch/arm/mach-at91/at91sam9261.c:287: error: 'NR_AIC_IRQS' undeclared here (not in a function)
arch/arm/mach-at91/at91sam9263.c:312: error: 'NR_AIC_IRQS' undeclared here (not in a function)
arch/arm/mach-at91/at91sam9rl.c:304: error: 'NR_AIC_IRQS' undeclared here (not in a function)
arch/arm/mach-h720x/h7202-eval.c:38: error: implicit declaration of function 'IRQ_CHAINED_GPIOB'
arch/arm/mach-ks8695/devices.c:46: error: 'KS8695_IRQ_WAN_RX_STATUS' undeclared here (not in a function)
arch/arm/mach-msm/devices.c:28: error: 'INT_UART1' undeclared here (not in a function)
arch/arm/mach-mx2/devices.c:233: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function)
arch/arm/mach-mx3/devices.c:128: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function)
arch/arm/mach-omap1/mcbsp.c:140: error: 'INT_730_McBSP1RX' undeclared here (not in a function)
arch/arm/mach-omap1/mcbsp.c:165: error: 'INT_McBSP1RX' undeclared here (not in a function)
arch/arm/mach-omap1/mcbsp.c:200: error: 'INT_McBSP1RX' undeclared here (not in a function)
arch/arm/mach-omap2/board-apollon.c:286: error: implicit declaration of function 'omap_set_gpio_direction'
arch/arm/mach-omap2/mcbsp.c:154: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function)
arch/arm/mach-omap2/mcbsp.c:181: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function)
arch/arm/mach-pxa/e350.c:36: error: 'IRQ_BOARD_START' undeclared here (not in a function)
arch/arm/plat-s3c/dev-i2c0.c:32: error: 'IRQ_IIC' undeclared here (not in a function)
...

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-08 16:29:42 +00:00
Sascha Hauer a244909152 [ARM] MXC: do not include mach/hardware.h from mach/memory.h
Instead of including other header files, define PHYS_OFFSET directly

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-18 16:40:14 +01:00
Sascha Hauer 9d631b835f [ARM] MXC: remove dependency to other include files from irqs.h
This patch removes the inclusion of mach/hardware.h from mach/irqs.h and
switches to more meaningful names for the irq related macros.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-18 16:40:11 +01:00
Valentin Longchamp 988d2d49f7 [ARM] MX31: basic support for mx31moboard platform
Initial support for mx31moboard platfor with 3 serial ports
and NOR Flash

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:58:19 +01:00
Sascha Hauer 3287abbd71 [ARM] pcm037: add NAND support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:58:14 +01:00
Sascha Hauer cb96cf1ad6 [ARM] MX3: add NAND support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:58:02 +01:00
Fabio Estevam 1553a1ec83 Add basic support for MX31PDK board.
Add basic support to the MX31PDK development board, also known
as MX31 3DS or MX31 3-stack board (http://www.freescale.com/imx31pdk).

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:57:57 +01:00
Sascha Hauer 3dad21a95b [ARM] pcm037: Add support for SRAM device
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:57:56 +01:00
Guennadi Liakhovetski ba54b95899 [ARM] pcm037: add support for the on-board LAN9217 network controller
smc911x now also supports LAN921{5,7,8} network controllers.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:57:55 +01:00
Guennadi Liakhovetski 4a7b98d7e7 i.MX31: fix mxc_iomux_set_pad()
mxc_iomux_set_pad() is buggy on i.MX31 - it calculates the register and
the offset therein wrongly. Fix it.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:57:24 +01:00
Sascha Hauer d517cab1c7 [ARM] pcm037: add 1wire support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14 12:05:02 +00:00
Sascha Hauer a840592933 [ARM] MX31: add w1 platform_device and resources
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14 12:05:02 +00:00
Sascha Hauer 2eca047b28 [ARM] mx31ads: Add missing include
mx31ads_defconfig compilation failed with

arch/arm/mach-mx3/mx31ads.c: In function 'mxc_init_imx_uart':
arch/arm/mach-mx3/mx31ads.c:102: error: 'mxc_uart_device0' undeclared (first use in this function)
arch/arm/mach-mx3/mx31ads.c:102: error: (Each undeclared identifier is reported only once
arch/arm/mach-mx3/mx31ads.c:102: error: for each function it appears in.)
make[1]: *** [arch/arm/mach-mx3/mx31ads.o] Error 1

Add missing include

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-10-30 15:58:09 +01:00
Sascha Hauer 6c1249e588 [ARM] pcm037: map AIPS1 and AIPS2 as nonshared area
The internal devices of the MX3 Processor have to be mapped
MT_DEVICE_NONSHARED devices, otherwise cache corruptions occur.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-10-30 09:42:24 +01:00
Russell King c97f68145e Merge branch 'for-rmk' of git://source.mvista.com/git/linux-davinci-2.6.git
Merge branch 'davinci' into devel
2008-10-09 21:33:05 +01:00
Russell King b1add0480a Merge branch 'for-rmk' of git://pasiphae.extern.pengutronix.de/git/imx/linux-2.6.git
Merge branch 'imx-devel' into devel
2008-10-09 21:33:03 +01:00
Russell King 9b727abdff [ARM] Remove MT_NONSHARED_DEVICE alias
Use MT_DEVICE_NONSHARED instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 16:41:07 +01:00
Luotao Fu defa8c309d i.MX3: Fix compiler warnings
Fix some base address declaration by adding a cast.

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-09 12:13:53 +02:00
Gilles Chanteperdrix d7568f79d5 i.MX31ADS: Add CPLD interrupts demultiplexing (take 3).
Needed for 8250 serial port and CS89x0 ethernet interface.

Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-09 10:19:42 +02:00
Gilles Chanteperdrix 0741794c0d i.MX31ADS: Enable the first IMX serial port. (take 3)
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-09 10:19:41 +02:00
Sascha Hauer 5cf0942123 i.MX3: make SoC devices globally available
Make SoC devices globally available to boards rather than using
a device specific init function.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-09 10:19:41 +02:00
Sascha Hauer a9b0623357 pcm037: add rts/cts support for serial port
We have rts/cts pins on the first serial port on the pcm037. Enable it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-02 10:19:29 +02:00
Russell King a09e64fbc0 [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:55:48 +01:00
Russell King be50972935 [ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h.
Then, since asm/hardware.h only exists to include asm/arch/hardware.h,
update everything to directly include asm/arch/hardware.h and remove
asm/hardware.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:40:08 +01:00
Juergen Beisert 9e8a30dce1 MX3: Adapt mx31lite to new timer init style
This patch converts the external "add_mx31lite-basic_defconfig.diff" to our
MXC implementation.

Note: This patch fixes a board reference only.

Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 10:02:53 +02:00
Daniel Mack 9a4cd7a5c8 MX3: Add basic support for LogicPD i.MX31 LiteKit
This patch adds basic support for i.MX31 LiteKit by LogicPD.
With printascii() in kernel/printk.c, it boots right into the
rootfs-panic.

Note: This is a modified version of Daniel's patch to fit into this patch
stack.

> On 09.06.2008, at 17:26, Russell King - ARM Linux wrote:
>
> > I would much prefer it if board specific includes were included by the
> > code which needs them rather than in asm/arch/hardware.h.  With the
> > device model, drivers shouldn't need to include any board specific
> > includes - only the board specific C file should need it.
>
> The new version of this patch (#5102) has been uploaded to the patch
> tracker this morning.

Signed-off-by: Daniel Mack <daniel@caiaq.de>

-- 
 arch/arm/configs/mx31litekit_defconfig    | 1100 ++++++++++++++++++++++++++++++
 arch/arm/mach-mx3/Kconfig                 |    7 
 arch/arm/mach-mx3/Makefile                |    1 
 arch/arm/mach-mx3/mx31lite.c              |   96 ++
 include/asm-arm/arch-mxc/board-mx31lite.h |   38 +
 include/asm-arm/arch-mxc/debug-macro.S    |    3 
 6 files changed, 1245 insertions(+)
2008-07-05 10:02:53 +02:00
Sascha Hauer ce8ffef0bf MX31: add basic pcm037 board support
This patch adds basic board support for phytecs pmc037 board.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05 10:02:52 +02:00
Juergen Beisert d0f349fbce i.MXC family: Adding timer support
This patch adds timer support for the i.MX machine family. This code can
be used on the following machs:

 - i.MX1 (tested)
 - i.MX2 (i.MX21 (to be tested), i.MX27 (tested))
 - i.MX3 (i.MX31 (tested))

TODO: It seems impossible to build a kernel for more than one CPU because the
timer do not follow the platform device rules. So it does only work if
timer 1 can be accessed on all CPUs at the same address.

Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05 10:02:50 +02:00
Sascha Hauer 90292ea60f MXC: add io multiplexing functions for mx3
This patch adds functions to use the io multiplexer on mx3 platforms.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05 10:02:50 +02:00
Juergen Beisert 07bd1a6cc7 MXC arch: Add gpio support for the whole platform
This patch bases on the one from Daniel Mack. The most important change to
Daniel's patch is to be more generic. This gpio routine supports at least
the i.MX27 and i.MX31 processors.

Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
Acked-by: Daniel Mack <daniel@caiaq.de>
2008-07-05 10:02:49 +02:00
Sascha Hauer e3d13ff4b9 mxc: add MX3 support for i.MX internal UART driver
This patch adds MX3 support for the i.MX internal uart driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05 10:02:48 +02:00
Sascha Hauer df1bf4bdb2 i.MX3: introduce clock API
This patch introduces the clock API for for arch-mxc

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05 10:02:48 +02:00
Sascha Hauer 63dd10846d MXC: do not include board specific header from architecture include
do not include board-mx31ads.h from hardware.h, instead include it
directly only where needed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05 10:02:43 +02:00
Russell King 193c3cc125 [ARM] Fix timer damage from d3d74453c3
Move the xtime write mode seqlock into timer_tick(), so it only
surrounds the call to do_timer().

This avoids a deadlock in update_process_times() ...
hrtimer_get_softirq_time() which tries to get a read mode seqlock
on xtime, thereby preventing booting.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 10:17:12 +00:00
Quinn Jensen 52c543f90c [ARM] 4461/1: MXC platform and i.MX31ADS core support
This patch adds the foundation pieces for
the Freescale MXC platforms, including
i.MX2 and i.MX3 based systems.

The bare-bones MX31 support in this patch
boots to the rootdev panic with 8250 serial
console configured "console=ttyS0,115200".
It assumes that Redboot is the boot loader.

Signed-off-by: Quinn Jensen <quinn.jensen@freescale.com>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-22 15:44:46 +01:00