Commit Graph

14 Commits

Author SHA1 Message Date
Paul Mundt 79c981283b sh: mach-x3proto: irq_data conversion.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 15:11:01 +09:00
Kulikov Vasiliy 5a30d7bfcd sh: boards/mach-x3proto: gpio: fix error handling code
Checks for (irq < 0) and (ilsel < 0) didn't make sense since they were
unsigned.  Made them signed.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-12 00:34:42 +09:00
Paul Mundt 3bccf534f9 sh: mach-x3proto: Improve ILSEL debugging.
At the moment ILSEL blows up with a BUG when aliased sets are handed in,
but as the enable call is able to hand back errors we opt for that path
instead. None of the ILSEL peripherals are vital to the board's
operation, so trapping a BUG is a bit excessive.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-04 03:07:49 +09:00
Paul Mundt 2c237329f7 sh: mach-x3proto: gpio-keys support.
This adds gpio-keys mappings for the button matrix on the baseboard,
now that we have support for the pin controller.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-04 03:00:49 +09:00
Paul Mundt 550591143e sh: mach-x3proto: Support for baseboard GPIOs.
This adds trivial support for the GPIOs implemented through the baseboard
CPLD, used for driving the button matrix.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-04 02:59:29 +09:00
Paul Mundt d39d0ed196 sh: mach-x3proto: Move the ilsel header to a better place.
We'll be adding more headers for this board, so move this over to its own
directory.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-04 02:50:32 +09:00
Paul Mundt 4bacd796cc sh: Support early IRQ vector map reservation for delayed controllers.
Some controllers will need to be initialized lazily due to pinmux
constraints, while others may simply have no need to be brought online if
there are no backing devices for them attached. In this case it's still
necessary to be able to reserve their hardware vector map before dynamic
IRQs get a hold of them.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-02 22:02:07 +09:00
Paul Mundt 3366e3585f sh: Move platform smp ops in to their own structure.
This cribs the MIPS plat_smp_ops approach for wrapping up the platform
ops. This will allow for mixing and matching different ops on the same
platform in the future.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-21 12:23:25 +09:00
Paul Mundt 9d56dd3b08 sh: Mass ctrl_in/outX to __raw_read/writeX conversion.
The old ctrl in/out routines are non-portable and unsuitable for
cross-platform use. While drivers/sh has already been sanitized, there
is still quite a lot of code that is not. This converts the arch/sh/ bits
over, which permits us to flag the routines as deprecated whilst still
building with -Werror for the architecture code, and to ensure that
future users are not added.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-26 12:58:40 +09:00
Magnus Damm 2c59b0b70b usb: m66592-udc platform data on_chip support
Convert the m66592-udc driver to use the on_chip flag
from platform data to enable on chip behaviour instead
of relying on CONFIG_SUPERH_BUILT_IN_M66592 ugliness.

This makes the code cleaner and also allows us to support
both external and internal m66592 with the same kernel.

It also makes the Kconfig part more future proof since
we with this patch can add support for new processors
with on-chip m66592 without modifying the Kconfig.

The patch adds a m66592 header file for platform data
and ties in platform data to the existing m66592 devices.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-23 13:04:15 +09:00
Yoshihiro Shimoda fcaf99d20d sh: x3proto: add platform data for r8a66597-hcd
and remove redundant parameter for r8a66597-hcd.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17 16:19:43 +09:00
Paul Mundt 10f0fc17f5 sh: mach-x3proto: needs linux/irq.h.
Since commit ba84be2338
("remove linux/hardirq.h from asm-generic/local.h"), the asm/irq.h
definitions that mach-x3proto/setup.c depends on are no longer available,
causing the build to die. So, include linux/irq.h explicitly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21 17:42:58 +09:00
Paul Mundt e77eb36472 sh: mach-x3proto: Fix up smc91x platform data.
smc91x on x3proto needs 16-bit access and nowait, which we can now do
through the platform data.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-11 20:17:48 +09:00
Paul Mundt da2014a2b0 sh: Shuffle the board directories in to mach groups.
This flattens out the board directories in to individual mach groups,
we will use this for getting rid of unneeded directories, simplifying
the build system, and becoming more coherent with the refactored
arch/sh/include topology.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29 21:01:19 +09:00