Add it to NETWORKING [GENERAL] to make sure patches for selftests
go to the netdev list as well.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If sp->info is NULL, we will hit NULL pointer dereference in probe() while
setting bus_num and num_chipselect for master:
sp->bitbang.master->bus_num = sp->info->bus_num;
sp->bitbang.master->num_chipselect = sp->info->num_chipselect;
Thus add NULL test for sp->info in probe() to prevent NULL pointer dereference.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
This is required since commit 2025172e32 "spi/bitbang: Use core message pump".
spi-bitbang now uses core message pump, so it needs to call spi_master_suspend/
spi_master_resume to stop/start the queue while suspend/resume.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
This driver does not work for bits_per_word greater than 16.
Set bits_per_word_mask so spi core will reject transfers that attempt to use
an unsupported bits_per_word value.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
We already has NULL test for master after calling spi_alloc_master().
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
In the implementation of __spi_validate(), spi core will set transfer
bits_per_word and max speed as spi device default if it is not set for
this transfer. So we can remove the same logic in spi_clps711x_setup_xfer() and
spi_clps711x_transfer_one().
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Set master->max_speed_hz and master->min_speed_hz then spi core will handle
checking transfer speed. So we can remove the same checking in this driver.
This patch also remove testing if hz is 0 because spi->max_speed_hz will be
default set to master->min_speed_hz if it was not set. So the transfer speed
will never set to 0.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Commit 595e4f7e69 ("KVM: PPC: Book3S HV: Use load/store_fp_state
functions in HV guest entry/exit") changed the register usage in
kvmppc_save_fp() and kvmppc_load_fp() but omitted changing the
instructions that load and save VRSAVE. The result is that the
VRSAVE value was loaded from a constant address, and saved to a
location past the end of the vcpu struct, causing host kernel
memory corruption and various kinds of host kernel crashes.
This fixes the problem by using register r31, which contains the
vcpu pointer, instead of r3 and r4.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 7b490411c3 ("KVM: PPC: Book3S HV: Add new state for
transactional memory") incorrectly added some duplicate code to the
guest exit path because I didn't manage to clean up after a rebase
correctly. This removes the extraneous material. The presence of
this extraneous code causes host crashes whenever a guest is run.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This section will list xtfpga platform-specific drivers.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
This simple SPI master controller is built into xtfpga bitstreams. It
always transfers 16 bit words in SPI mode 0, automatically asserting CS
on transfer start and deasserting on end.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Second pull request of 2014-03-12. The first one was requested to be canceled.
Rob's fix for oops on invalidate_caches() and a fix for a
performance regression.
* tag 'ttm-fixes-3.14-2014-03-12' of git://people.freedesktop.org/~thomash/linux:
drm/ttm: don't oops if no invalidate_caches()
drm/ttm: Work around performance regression with VM_PFNMAP
A few more radeon fixes.
* 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/cik: properly set compute ring status on disable
drm/radeon/cik: stop the sdma engines in the enable() function
drm/radeon/cik: properly set sdma ring status on disable
drm/radeon: fix runpm disabling on non-PX harder
Pull request of 2014-03-13
one minor fix for new hw
* tag 'vmwgfx-fixes-3.14-2014-03-13' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Fix a surface reference corner-case in legacy emulation mode
If running on a gb-object capable device with a non-gb capable surface
exporter (X server) and a gb capable surface referencing client (GL driver),
the referencing client expects to find a shareable backing buffer attached to
the surface at reference time. This may not be the case if the surface has
not yet been validated. This would cause the surface reference IOCTL to
return an error.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Resource management
- Fix allocation from 0-4GB regions (Bjorn Helgaas)
Miscellaneous
- Enable INTx only when MSI/MSI-X not enabled (Bjorn Helgaas)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJTIJqhAAoJEFmIoMA60/r8ac0P/0MOLlOnWCSrBI2nEM6BptpQ
JskksEPN8tZn/9dUIjgcJnn1zM6XmLUx2aDWDcVn1WOQfazdnxeU0aJVeF5EQaXK
vFzwwXIVliIp5B3Sen0UMw3GQHKuE446CftSPfhnFjiuJH+B2O/MbE9H8ZSDoMlN
dqyzR5f7WW3qxEuB7iBNEH5D5vZocZmOShNhWNptu9Xjp9Cz6aHIW1dT+Nbw4VAP
6Kxqp5xOg6DZafbPpCcel+FljWtHdnNRgvdvOCgwCh3rGnRc0bLY7GUmIC5POzo2
vCGjn2hPueJTZca/UiDL6fzoV3oDJzFPmyMCHJ9ikMj09rbL07ixA8PaWqJl7Iw8
UyJdDwdGg03/TfTC7PSIighkvxlW7KJxoHIHi65gFxohvqjGgGM76FwAQD92uJFX
xKpdKaiWH4R3UMhj9SRSf2+oArRv58PtrfhewiGjB1RH8Ykv2MP3WfG2afxeJf9J
WFKbE/qnjUmwsfDHaFZ0Et8V4FNk8a0CWCwuFGr8wPJhjEBExTSuGRYe3xrexy7a
6cpb+d69vH7b8+gEdvY0a0qdlWqhYjqCHetWpYJst4QkWcSEneMfM29EtddEY/Hf
D+MjFDW+B0dAI4oS/Q2FEZ2yopXt7xpjV5r6ZcX8HdSTjgo86q6Kz6JAr9Bg8pfd
quHIPL3i+gHtQuBk1BGy
=WUHJ
-----END PGP SIGNATURE-----
Merge tag 'pci-v3.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"These are two important regression fixes for bugs we've introduced so
far in v3.14.
One of the resource allocation changes from the merge window is broken
for 32-bit kernels where we don't use _CRS for PCI host bridges
(mostly pre-2008 machines), so there's a fix for that.
The INTx enable change we put in after the merge window turned out to
break pciehp because we re-enable INTx on the hotplug bridge, which
apparently breaks MSI for future hotplug events"
* tag 'pci-v3.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Don't check resource_size() in pci_bus_alloc_resource()
PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabled
fixes Windows guests on AMD processors.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=gJNC
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"The ARM patch fixes a build breakage with randconfig. The x86 one
fixes Windows guests on AMD processors"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: fix cr8 intercept window
ARM: KVM: fix non-VGIC compilation
Commit 73f7d1ca32 (ACPI / init: Run acpi_early_init() before
timekeeping_init()) optimistically moved the early ACPI initialization
before timekeeping_init(), but that didn't work, because it broke fast
TSC calibration for Julian Wollrath on Thinkpad x121e (and most likely
for others too). The reason is that acpi_early_init() enables the SCI
and that interferes with the fast TSC calibration mechanism.
Thus follow the original idea to execute acpi_early_init() before
efi_enter_virtual_mode() to help the EFI people for now and we can
revisit the other problem that commit 73f7d1ca32 attempted to
address in the future (if really necessary).
Fixes: 73f7d1ca32 (ACPI / init: Run acpi_early_init() before timekeeping_init())
Reported-by: Julian Wollrath <jwollrath@web.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After commit da60ce9f2f (cpufreq: call cpufreq_driver->get() after
calling ->init()) __cpufreq_add_dev() sometimes fails for CPUs handled
by intel_pstate, because that driver may return 0 from its ->get()
callback if it has not run long enough to collect enough samples on the
given CPU. That didn't happen before commit da60ce9f2f which added
policy->cur initialization to __cpufreq_add_dev() to help reduce code
duplication in other cpufreq drivers.
However, the code added by commit da60ce9f2f need not be executed
for cpufreq drivers having the ->setpolicy callback defined, because
the subsequent invocation of cpufreq_set_policy() will use that
callback to initialize the policy anyway and it doesn't need
policy->cur to be initialized upfront. The analogous code in
cpufreq_update_policy() is also unnecessary for cpufreq drivers
having ->setpolicy set and may be skipped for them as well.
Since intel_pstate provides ->setpolicy, skipping the upfront
policy->cur initialization for cpufreq drivers with that callback
set will cover intel_pstate and the problem it's been having after
commit da60ce9f2f will be addressed.
Fixes: da60ce9f2f (cpufreq: call cpufreq_driver->get() after calling ->init())
References: https://bugzilla.kernel.org/show_bug.cgi?id=71931
Reported-and-tested-by: Patrik Lundquist <patrik.lundquist@gmail.com>
Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A few fixes for ASoC (N810 DT init fix, DPCM error path fix and
a couple of MFD init fixes), and a fix for a Lenovo laptop.
All small and trivial fixes, suitable for rc7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=zMI1
-----END PGP SIGNATURE-----
Merge tag 'sound-3.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A few fixes for ASoC (N810 DT init fix, DPCM error path fix and a
couple of MFD init fixes), and a fix for a Lenovo laptop. All small
and trivial fixes, suitable for rc7"
* tag 'sound-3.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: 88pm860: Fix IO setup
ASoC: si476x: Fix IO setup
ALSA: hda - Fix loud click noise with IdeaPad 410Y
ASoC: pcm: free path list before exiting from error conditions
ASoC: n810: fix init with DT boot
When copying in a struct msghdr from the user, if the user has set the
msg_namelen parameter to a negative value it gets clamped to a valid
size due to a comparison between signed and unsigned values.
Ensure the syscall errors when the user passes in a negative value.
Signed-off-by: Matthew Leach <matthew.leach@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we disable the rings, set the status properly. If
not other code pathes may try and use the rings which are
not functional at this point.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Make sure patches for these tools go to the netdev list as well.
References: https://marc.info/?l=linux-kernel&m=139450284501328&w=2
Cc: David S. Miller <davem@davemloft.net>
Cc: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz says:
====================
mlx4 fixes
These short series fixes two bugs related to the vxlan support and a
missing req module call for the IB driver which is needed to support
IB/RDMA over Ethernet.
Pathes done over the net tree, commit dd38743 "vlan: Set correct
source MAC address with TX VLAN offload enabled"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When checking what protocol drivers to load, the IB driver should be
requested also over Ethernet ports, if the device supports IBoE (RoCE).
Fixes: b046ffe 'net/mlx4_core: Load higher level modules according to ports type'
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the device mac address is changed, we must deregister the vxlan
steering rule associated with the previous mac, and register a new
steering rule using the new mac.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the value used to dump the vxlan offloads device capability to align
with the MLX4_DEV_CAP_FLAG2_yyy definition. While on that, add dump to
the IPoIB flow-steering device capability and fix small typo.
The vxlan cap value wasn't fully handled when a conflict was resolved
between MLX4_DEV_CAP_FLAG2_DMFS_IPOIB coming from the IB tree to
MLX4_DEV_CAP_FLAG2_VXLAN_OFFLOADS coming from net-next.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We always stop the rings when disabling the engines so just
call the stop functions directly from the sdma enable function.
This way the rings' status is set correctly on suspend so
there are no problems on resume. Fixes resume failures that
result in acceleration getting disabled.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
When we disable the rings, set the status properly. If
not other code pathes may try and use the rings which are
not functional at this point.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Make sure runtime pm is disabled on non-PX hardware.
Should fix powerdown problems without displays attached.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
In 5bd076708 ("Xen-netback: Fix issue caused by using gso_type wrongly")
we use skb_is_gso to determine if we need an extra slot to accommodate
the SKB. There's similar error in interface.c. Change that to use
skb_is_gso as well.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Annie Li <annie.li@oracle.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to avoid wasting cache space a partial block at the end of the
origin device is not cached. Unfortunately, the check for such a
partial block at the end of the origin device was flawed.
Fix accesses beyond the end of the origin device that occured due to
attempted promotion of an undetected partial block by:
- initializing the per bio data struct to allow cache_end_io to work properly
- recognizing access to the partial block at the end of the origin device
- avoiding out of bounds access to the discard bitset
Otherwise, users can experience errors like the following:
attempt to access beyond end of device
dm-5: rw=0, want=20971520, limit=20971456
...
device-mapper: cache: promotion failed; couldn't copy block
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
During demotion or promotion to a cache's >2TB fast device we must not
truncate the cache block's associated sector to 32bits. The 32bit
temporary result of from_cblock() caused a 32bit multiplication when
calculating the sector of the fast device in issue_copy_real().
Use an intermediate 64bit type to store the 32bit from_cblock() to allow
for proper 64bit multiplication.
Here is an example of how this bug manifests on an ext4 filesystem:
EXT4-fs error (device dm-0): ext4_mb_generate_buddy:756: group 17136, 32768 clusters in bitmap, 30688 in gd; block bitmap corrupt.
JBD2: Spotted dirty metadata buffer (dev = dm-0, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
We always disable cr8 intercept in its handler, but only re-enable it
if handling KVM_REQ_EVENT, so there can be a window where we do not
intercept cr8 writes, which allows an interrupt to disrupt a higher
priority task.
Fix this by disabling intercepts in the same function that re-enables
them when needed. This fixes BSOD in Windows 2008.
Cc: <stable@vger.kernel.org>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paul reported that after f75b99d5a7 ("PCI: Enforce bus address limits in
resource allocation") on a 32-bit kernel (CONFIG_PHYS_ADDR_T_64BIT not
set), intel-gtt complained "can't ioremap flush page - no chipset
flushing". In addition, other PCI resource allocations, e.g., for bridge
windows, failed.
This happens because we incorrectly skip bus resources of
[mem 0x00000000-0xffffffff] because we think they are of size zero.
When resource_size_t is 32 bits wide, resource_size() on
[mem 0x00000000-0xffffffff] returns 0 because (r->end - r->start + 1)
overflows.
Therefore, we can't use "resource_size() == 0" to decide that allocation
from this resource will fail. allocate_resource() should fail anyway if it
can't satisfy the address constraints, so we should just depend on that.
A [mem 0x00000000-0xffffffff] bus resource is obviously not really valid,
but we do fall back to it as a default when we don't have information about
host bridge apertures.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=71611
Fixes: f75b99d5a7 PCI: Enforce bus address limits in resource allocation
Reported-and-tested-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Andreas reported that after 1f42db786b ("PCI: Enable INTx if BIOS left
them disabled"), pciehp surprise removal stopped working.
This happens because pci_reenable_device() on the hotplug bridge (used in
the pciehp_configure_device() path) clears the Interrupt Disable bit, which
apparently breaks the bridge's MSI hotplug event reporting.
Previously we cleared the Interrupt Disable bit in do_pci_enable_device(),
which is used by both pci_enable_device() and pci_reenable_device(). But
we use pci_reenable_device() after the driver may have enabled MSI or
MSI-X, and we *set* Interrupt Disable as part of enabling MSI/MSI-X.
This patch clears Interrupt Disable only when MSI/MSI-X has not been
enabled.
Fixes: 1f42db786b PCI: Enable INTx if BIOS left them disabled
Link: https://bugzilla.kernel.org/show_bug.cgi?id=71691
Reported-and-tested-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org
CC: Sarah Sharp <sarah.a.sharp@linux.intel.com>
This is a DT-only driver, so remove all non-DT paths.
of_gpio_named_count() may fail, thus also add checking it's return value.
efm32_spi_probe_dt() never fails, make it return void.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
We need to enable interrupt processing before all the modeset
state is set up. But that means we can fall over when we get a pipe
underrun. This shouldn't happen as long as the bios works correctly
but as usual this turns out to be wishful thinking.
So disable error interrupts at irq install time and rely on the
re-enabling code in the modeset functions to take care of this.
Note that due to the SDE interrupt handling race we must
uncondtionally enable all interrupt sources in SDEIER, hence no need
to enable the SERR bit specifically.
On gmch platforms we don't have an explicit enable/mask bit for fifo
underruns. Fixing this up would require a bit of software tracking,
hence is material for a separate patch. To make this possible we need
to switch all gmch platforms to the new pipestat interrupt handling
scheme Imre implemented for vlv, and then also add a safe form of sw
state checking to __cpu_fifo_underrun_reporting_enabled a bit.
v2: Also handle the ilk/snb cpu fifo underrun bits accordingly.
Spotted by Ville.
v3: Also handle the south interrupt underrun bits on ibx. Again
spotted by Ville.
Reported-by: Rob Clark <robdclark@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The display interrupts changed on BDW, so the current ILK-HSW specific
code in ilk_pipe_in_vblank_locked() doesn't work there. Add the required
bits for BDW, and while at it, change the existing code to use nicer
looking vblank status bit macros.
Also remove the now stale __raw_i915_read16() definition which was
left over from the failed gen2 ISR experiment.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73962
Tested-by: Lu Hua <huax.lu@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
On HSW the scanline counter seems to behave differently depending on
the output type. eDP on port A does what you would expect an the normal
+1 fixup is sufficient to cover it. But on HDMI outputs we seem to need
a +2 fixup. Just assume we always need the +2 fixup and accept the
slight inaccuracy on eDP.
This fixes a regression introduced in:
commit 8072bfa604
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Mon Oct 28 21:22:52 2013 +0200
drm/radeon: Move the early vblank IRQ fixup to radeon_get_crtc_scanoutpos()
That commit removed the heuristic that tried to fix up the timestamps
for vblank interrupts that fire a bit too early. Since then the vblank
timestamp code would treat some vblank interrupts as spurious since the
scanline counter would indicate that vblank_start wasn't reached yet.
That in turn lead to incorrect vblank event sequence numbers being
reported to userspace, which lead to unsteady framerate in applications
such as XBMC which uses them for timing purposes.
v2: Remember to call ilk_pipe_in_vblank_locked() on HSW too (Mika)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75725
Tested-by: bugzilla1@gmx.com
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
A performance regression was introduced in TTM in linux 3.13 when we started using
VM_PFNMAP for shared mappings. In theory this should've been faster due to
less page book-keeping but it appears like VM_PFNMAP + x86 PAT + write-combine
is a particularly cpu-hungry combination, as seen by largely increased
cpu-usage on r200 GL video playback.
Until we've sorted out why, revert to always use VM_MIXEDMAP.
Reference: freedesktop.org bugzilla bug #75719
Reported-and-tested-by: <smoki00790@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: stable@vger.kernel.org
If the initialization of storvsc fails, the storvsc_device_destroy()
causes NULL pointer dereference.
storvsc_bus_scan()
scsi_scan_target()
__scsi_scan_target()
scsi_probe_and_add_lun(hostdata=NULL)
scsi_alloc_sdev(hostdata=NULL)
sdev->hostdata = hostdata
now the host allocation fails
__scsi_remove_device(sdev)
calls sdev->host->hostt->slave_destroy() ==
storvsc_device_destroy(sdev)
access of sdev->hostdata->request_mempool
Signed-off-by: Ales Novak <alnovak@suse.cz>
Signed-off-by: Thomas Abraham <tabraham@suse.com>
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
The tx descriptor version of RTL8111B belong to RTL_TD_0.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following build problem with binutils-2.24
gcc -Wall -O2 -c -o bpf_jit_disasm.o bpf_jit_disasm.c
In file included from bpf_jit_disasm.c:25:0:
/usr/include/bfd.h:35:2: error: #error config.h must be included
before this header
#error config.h must be included before this header
This is similar to commit 3ce711a6ab
"perf tools: bfd.h/libbfd detection fails with recent binutils"
See: https://sourceware.org/bugzilla/show_bug.cgi?id=14243
CC: David S. Miller <davem@davemloft.net>
CC: Daniel Borkmann <dborkman@redhat.com>
CC: netdev@vger.kernel.org
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit a998d43423 claimed to introduce negative offset support to x86 jit,
but it couldn't be working, since at the time of the execution
of LD+ABS or LD+IND instructions via call into
bpf_internal_load_pointer_neg_helper() the %edx (3rd argument of this func)
had junk value instead of access size in bytes (1 or 2 or 4).
Store size into %edx instead of %ecx (what original commit intended to do)
Fixes: a998d43423 ("bpf jit: Let the x86 jit handle negative offsets")
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Jan Seiffert <kaffeemonster@googlemail.com>
Cc: Eric Dumazet <edumazet@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without this check someone could easily create a denial of service
by injecting multicast-specific queries to enable the bridge
snooping part if no real querier issuing periodic general queries
is present on the link which would result in the bridge wrongly
shutting down ports for multicast traffic as the bridge did not learn
about these listeners.
With this patch the snooping code is enabled upon receiving valid,
general queries only.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
General IGMP and MLD queries are supposed to have the multicast
link-local all-nodes address as their destination according to RFC2236
section 9, RFC3376 section 4.1.12/9.1, RFC2710 section 8 and RFC3810
section 5.1.15.
Without this check, such malformed IGMP/MLD queries can result in a
denial of service: The queries are ignored by most IGMP/MLD listeners
therefore they will not respond with an IGMP/MLD report. However,
without this patch these malformed MLD queries would enable the
snooping part in the bridge code, potentially shutting down the
according ports towards these hosts for multicast traffic as the
bridge did not learn about these listeners.
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann
Axel Lin
Paul Mackerras
Max Filippov
Dave Airlie
Thomas Hellstrom
Linus Torvalds
Rafael J. Wysocki
Matthew Leach
Alex Deucher
Tobias Klauser
Geert Uytterhoeven
David S. Miller
Or Gerlitz
Wei Liu
Rob Clark
Heinz Mauelshagen
Radim Krčmář
Bjorn Helgaas
Daniel Vetter
Ville Syrjälä
Ales Novak
hayeswang
Markos Chandras
Alexei Starovoitov
Linus Lüssing