Commit Graph

604 Commits

Author SHA1 Message Date
Christian Gmeiner 4b949b8af1 drivers/leds/leds-ot200.c: fix error caused by shifted mask
During the development of this driver an in-house register documentation
was used.  The last week some integration tests were done and this
problem was found.  It turned out that the released register
documentation is wrong.

The fix is very simple: shift all masks by one.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Bryan Wu <cooloney@gmail.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-24 16:22:51 -07:00
Timo Teräs 803d19d57a leds: leds-gpio: reserve gpio before using it
This reverts commit a99d76f (leds: leds-gpio: use gpio_request_one)
and commit 2d7c22f (leds: leds-gpio: set devm_gpio_request_one()
flags param correctly) which was a fix of the first one.

The conversion to devm_gpio_request in commit e3b1d44c (leds:
leds-gpio: use devm_gpio_request_one) is not reverted.

The problem is that gpio_cansleep() and gpio_get_value_cansleep()
calls can crash if the gpio is not first reserved. Incidentally this
same bug existed earlier and was fixed similarly in commit d95cbe61
(leds: Fix potential leds-gpio oops). But the OOPS is real. It happens
when GPIOs are provided by module which is not yet loaded.

So this fixes the following BUG during my ALIX boot (3.9.2-vanilla):

BUG: unable to handle kernel NULL pointer dereference at 0000004c
IP: [<c11287d6>] __gpio_cansleep+0xe/0x1a
*pde = 00000000
Oops: 0000 [#1] SMP
Modules linked in: leds_gpio(+) via_rhine mii cs5535_mfd mfd_core
geode_rng rng_core geode_aes isofs nls_utf8 nls_cp437 vfat fat
ata_generic pata_amd pata_cs5536 pata_acpi libata ehci_pci ehci_hcd
ohci_hcd usb_storage usbcore usb_common sd_mod scsi_mod squashfs loop
Pid: 881, comm: modprobe Not tainted 3.9.2 #1-Alpine
EIP: 0060:[<c11287d6>] EFLAGS: 00010282 CPU: 0
EIP is at __gpio_cansleep+0xe/0x1a
EAX: 00000000 EBX: cf364018 ECX: c132b8b9 EDX: 00000000
ESI: c13993a4 EDI: c1399370 EBP: cded9dbc ESP: cded9dbc
 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 8005003b CR2: 0000004c CR3: 0f0c4000 CR4: 00000090
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
Process modprobe (pid: 881, ti=cded8000 task=cf094aa0 task.ti=cded8000)
Stack:
 cded9de0 d09471cb 00000000 c1399260 cf364014 00000000 c1399260 c1399254
 d0949014 cded9df4 c118cd59 c1399260 d0949014 d0949014 cded9e08 c118ba47
 c1399260 d0949014 c1399294 cded9e1c c118bb75 cded9e24 d0949014 00000000
Call Trace:
 [<d09471cb>] gpio_led_probe+0xba/0x203 [leds_gpio]
 [<c118cd59>] platform_drv_probe+0x26/0x48
 [<c118ba47>] driver_probe_device+0x75/0x15c
 [<c118bb75>] __driver_attach+0x47/0x63
 [<c118a727>] bus_for_each_dev+0x3c/0x66
 [<c118b6f9>] driver_attach+0x14/0x16
 [<c118bb2e>] ? driver_probe_device+0x15c/0x15c
 [<c118b3d5>] bus_add_driver+0xbd/0x1bc
 [<d08b4000>] ? 0xd08b3fff
 [<d08b4000>] ? 0xd08b3fff
 [<c118bffc>] driver_register+0x74/0xec
 [<d08b4000>] ? 0xd08b3fff
 [<c118c8e8>] platform_driver_register+0x38/0x3a
 [<d08b400d>] gpio_led_driver_init+0xd/0x1000 [leds_gpio]
 [<c100116c>] do_one_initcall+0x6b/0x10f
 [<d08b4000>] ? 0xd08b3fff
 [<c105e918>] load_module+0x1631/0x1907
 [<c10975d6>] ? insert_vmalloc_vmlist+0x14/0x43
 [<c1098d5b>] ? __vmalloc_node_range+0x13e/0x15f
 [<c105ec50>] sys_init_module+0x62/0x77
 [<c1257888>] syscall_call+0x7/0xb
EIP: [<c11287d6>] __gpio_cansleep+0xe/0x1a SS:ESP 0068:cded9dbc
CR2: 000000000000004c
 ---[ end trace 5308fb20d2514822 ]---

Signed-off-by: Timo Teräs <timo.teras@iki.f>
Cc: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Raphael Assenat <raph@8d.com>
Cc: Trent Piepho <tpiepho@freescale.com>
Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-05-21 11:26:53 -07:00
Linus Torvalds 5647ac0ad4 Removal of GENERIC_GPIO for v3.10
GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid
 cases for enableing GENERIC_GPIO without GPIOLIB, even though it is
 possible to do so which has been causing confusion and breakage. This
 branch does the work to completely eliminate GENERIC_GPIO.
 
 However, it is not trivial to just create a branch to remove it. Over
 the course of the v3.9 cycle more code referencing GENERIC_GPIO has been
 added to linux-next that conflicts with this branch. The following must
 be done to resolve the conflicts when merging this branch into mainline:
 
 * "git grep CONFIG_GENERIC_GPIO" should return 0 hits. Matches should be
   replaced with CONFIG_GPIOLIB
 * "git grep '\bGENERIC_GPIO\b'" should return 1 hit in the Chinese
   documentation.
 * Selectors of GENERIC_GPIO should be turned into selectors of GPIOLIB
 * definitions of the option in architecture Kconfig code should be deleted.
 
 Stephen has 3 merge fixup patches[1] that do the above. They are currently
 applicable on mainline as of May 2nd.
 
 [1] http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg428056.html
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRifUnAAoJEEFnBt12D9kBs2YP/0U6+ia+xYvkVaJc28PDVIzn
 OReZNcJOYU8D5voxz0voaRD0EdcPwjbMu9Kp9aXMHlk4VxevF+8jCc/us0bIjtO1
 VcB5VmSCIhMhxdnBlum11Mk7Vr5MCweyl9NBsypnPt8cl4obMBZHf2yzoodFktNb
 wtyYlOb6FALtc6iDbOO6dG3w9F7FAOLvskUFzdv89m8mupTsBu9jw9NqFDbJHOex
 rxq0Sdd+kWF/nkJVcV5Y6jIdletRlhpipefMJ9diexreHvwqh+c4kJEYZaXgB5+m
 ha95cPbReK1d+RqzM3A8d4irzSVSmq4k7ijI6QkFOr48+AH7XsgKv5so885LKzMN
 IIXg2Phm9i0H8+ecEvhcc4oIYBHJiEKK54Y0qUD9dqbFoDGPTCSqMHdSSMbpAY+J
 bIIXlVzj1En3PPNUJLPt8q8Qz6WxCT9mDST3QSGYnD4o90HT+1R9j92RxGL6McOq
 rUOyJDwmzFvpBvKK4raGdOU435M+ps2NPKKNIRaIGQPPY9rM1kN4YqvhXukEsC9L
 3a3+3cQLh7iKxBHncxeQsJfethP1CPkJnzvF9r+ZZLf2rcPH4pbQIE2uO0XnX/nd
 5/DKi0nGgAJ//GMMzdo3RiOA5zGFjIZ/KMvfhQldpP6qFJRhqdGi6FPlAcwr1z1n
 YnCByPwwlvfC4LTXFOGL
 =xodc
 -----END PGP SIGNATURE-----

Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux

Pull removal of GENERIC_GPIO from Grant Likely:
 "GENERIC_GPIO now synonymous with GPIOLIB.  There are no longer any
  valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it
  is possible to do so which has been causing confusion and breakage.
  This branch does the work to completely eliminate GENERIC_GPIO."

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux:
  gpio: update gpio Chinese documentation
  Remove GENERIC_GPIO config option
  Convert selectors of GENERIC_GPIO to GPIOLIB
  blackfin: force use of gpiolib
  m68k: coldfire: use gpiolib
  mips: pnx833x: remove requirement for GENERIC_GPIO
  openrisc: default GENERIC_GPIO to false
  avr32: default GENERIC_GPIO to false
  xtensa: remove explicit selection of GENERIC_GPIO
  sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB
  powerpc: remove redundant GENERIC_GPIO selection
  unicore32: default GENERIC_GPIO to false
  unicore32: remove unneeded select GENERIC_GPIO
  arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB
  arm: remove redundant GENERIC_GPIO selection
  mips: alchemy: require gpiolib
  mips: txx9: change GENERIC_GPIO to GPIOLIB
  mips: loongson: use GPIO driver on CONFIG_GPIOLIB
  mips: remove redundant GENERIC_GPIO select
2013-05-09 09:59:16 -07:00
Alexandre Courbot 76ec9d18b8 Convert selectors of GENERIC_GPIO to GPIOLIB
GENERIC_GPIO is now equivalent to GPIOLIB and features that depended on
GENERIC_GPIO can now depend on GPIOLIB to allow removal of this option.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-16 18:47:14 +09:00
Jingoo Han df92d5ff5e leds: leds-asic3: switch to using SIMPLE_DEV_PM_OPS
Switch to using SIMPLE_DEV_PM_OPS  macro to declare the driver's
pm_ops. It reduces code size. Also, CONFIG_PM_SLEEP is added to
suspend/ resume functions to prevent build warnings when
CONFIG_PM_SLEEP is not selected.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-04-01 11:04:54 -07:00
Jingoo Han cceba0e4b8 leds: leds-bd2802: add CONFIG_PM_SLEEP to suspend/resume functions
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following
build warning when CONFIG_PM_SLEEP is not selected. This is because
sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when
the CONFIG_PM_SLEEP is enabled.

drivers/leds/leds-bd2802.c:766:12: warning: 'bd2802_suspend' defined but not used [-Wunused-function]
drivers/leds/leds-bd2802.c:776:12: warning: 'bd2802_resume' defined but not used [-Wunused-function]

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-04-01 11:04:53 -07:00
Kim, Milo 81f2a5b4a0 leds: lp55xx: configure the clock detection
Now LP55xx provides automatic clock detection API, lp55xx_is_extclk_used().
The clock configuration can be done by the driver itself.

(a) Concept
The default value is set by each driver with clock selection.
The internal clock selection bit is updated in case that the external clock
is not detected or clock rate is not 32KHz.

(b) Change on LP55xx platform data
The clock configuration is done automatically, so no need to define
'update_config' in the platform side.
Correlated information are removed in the documentations and header.

(c) Definitions moved from header to driver files
CONFIG register values are moved each driver, LP5521 and LP5562.
Not necessary definitions are removed also.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-04-01 11:04:53 -07:00
Kim, Milo 53b4192266 leds: lp55xx: use common clock framework when external clock is used
Program execution is timed with 32768Hz clock in the LP55xx family devices.
To run LED functionalities, LP55xx devices provide two options.
One is using internal clock. The other is using external clock.
This patch enables external clock detection automatically.
If external clock is not detected, then the internal clock will be used in the
LP55xx driver.

Valid clock rate is 32768Hz in LP55xx devices.

This new API is used in each LP55xx driver like LP5521 and LP5562.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-04-01 11:04:53 -07:00
Simon Guinot 3de1929ba6 leds: leds-ns2: fix oops at module removal
This patch fixes a regression introduced by commit 72052fcc10
("leds: leds-ns2: add device tree binding").

When the driver is initialized with device tree data, platform_data
pointer is NULL. This causes a kernel oops at removal.

To fix this bug, num_leds is moved into driver_data and platform_data
is not longer used from ns2_led_remove().

Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-04-01 11:04:52 -07:00
Florian Vaussard c971ff185f leds: leds-pwm: Defer led_pwm_set() if PWM can sleep
Call to led_pwm_set() can happen inside atomic context, like triggers.
If the PWM call can sleep, defer using a worker.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-04-01 11:04:50 -07:00
Kim, Milo 24d3212847 leds: lp55xx: fix the sysfs read operation
According to a sysfs documentation(Documentation/filesystem/sysfs.txt),
scnprintf() should be used in a read operation method.
It guarantees safe buffer size(PAGE_SIZE) which is allocated by the sysfs.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-04-01 11:04:50 -07:00
Kim, Milo 313bf0b1a0 leds: lm355x, lm3642: support camera LED triggers for flash and torch
LM355x and LM3642 support flash and torch functionality.

 (Camera driver)          (LED trigger for camera)       (LED driver)
 Turn on the flash  ...>  ledtrig_flash_ctrl(true) ...>  LM355x or LM3642
                                                         brightness ctrl
                                                       <actual driving here>

Flash/torch LEDs are controlled by other driver using LED camera trigger
APIs, ledtrig_flash_ctrl()/ledtrig_torch_ctrl().
Then, actual device control is activated by each LED driver such like
LM355x or LM3642.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-04-01 11:04:50 -07:00
Kim, Milo 48a1d032c9 leds: add camera LED triggers
Some LED devices support flash/torch functionality through the LED subsystem.
This patch enables direct LED trigger controls by the driver.
Flash on/off and torch on/off can be done simply by other driver space.
Two trigger APIs are added, ledtrig_flash_ctrl() and ledtrig_torch_ctrl().

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-04-01 11:04:50 -07:00
Sachin Kamat fbd9df28fa leds: tca6507: Use of_match_ptr() macro
This eliminates having an #ifdef returning NULL for the case
when OF is disabled.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-04-01 11:04:50 -07:00
Mark Brown d67eb8e66c leds: wm8350: Complain if we fail to reenable DCDC
Provide some trace, though the hardware is most likely non-functional if
this happens.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-04-01 11:04:49 -07:00
Jingoo Han 901b74a3c4 leds: renesas: set gpio_request_one() flags param correctly
The gpio_request_one() flags parameter was set to:

  GPIOF_DIR_OUT | !!brightness

GPIOF_DIR_OUT and GPIOF_DIR_IN are defined as below:
  GPIOF_DIR_OUT   (0 << 0)
  GPIOF_DIR_IN    (1 << 0)

So, when '!!brightness' is 1, the gpio pin can be set as input,
instead of output.

To prevent this problem, GPIOF_OUT_INIT flags should be used when
using gpio_request_one().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-04-01 11:04:49 -07:00
Jingoo Han 9d04cbaadf leds: leds-ns2: set devm_gpio_request_one() flags param correctly
The devm_gpio_request_one() flags parameter was set to:

  GPIOF_DIR_OUT | gpio_get_value(template->cmd)

GPIOF_DIR_OUT and GPIOF_DIR_IN are defined as below:

  GPIOF_DIR_OUT   (0 << 0)
  GPIOF_DIR_IN    (1 << 0)

So, when 'gpio_get_value(template->cmd)' is 1, the gpio pin can
be set as input, instead of output.

To prevent this problem, GPIOF_OUT_INIT flags should be used when
using devm_gpio_request_one().

Same goes for 'gpio_get_value(template->slow)' case.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-04-01 11:04:49 -07:00
Jingoo Han 84f6942cde leds: leds-lt3593: set devm_gpio_request_one() flags param correctly
The devm_gpio_request_one() flags parameter was set to:

  GPIOF_DIR_OUT | state

GPIOF_DIR_OUT and GPIOF_DIR_IN are defined as below:

  GPIOF_DIR_OUT   (0 << 0)
  GPIOF_DIR_IN    (1 << 0)

So, when 'state' is 1, the gpio pin can be set as input, instead
of output.

To prevent this problem, GPIOF_OUT_INIT flags should be used when
using devm_gpio_request_one().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-04-01 11:04:49 -07:00
Jingoo Han e9dd68cf14 leds: leds-bd2802: remove erroneous __exit annotation
CONFIG_HOTPLUG was removed, so __devexit or __exit of remove()
should not be used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-04-01 11:04:49 -07:00
Jingoo Han 6fd7962791 leds: atmel-pwm: remove erroneous __exit annotation
CONFIG_HOTPLUG was removed, so __devexit or __exit of remove()
should not be used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-04-01 11:04:48 -07:00
Kim, Milo f07fb52107 leds: move LED trigger drivers into new subdirectory
For better driver management, new subdirectory, 'trigger' is created.
All LED trigger drivers are moved into this directory.

Internal header, 'leds.h' is included in each LED trigger drivers.
Fix the location of header file, "leds.h" -> "../leds.h" in driver files.
One exception is here, 'ledtrig-timer.c'.
There is no need to include 'leds.h'. so '#include "leds.h"' line was removed.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-04-01 11:04:48 -07:00
Kim, Milo ff45262a85 leds: add new LP5562 LED driver
LP5562 can drive up to 4 channels, RGB and White.
LEDs can be controlled directly via the led class control interface.

 LP55xx common driver
  LP5562 is one of LP55xx family device, so LP55xx common code are used.
  On the other hand, chip specific configuration is defined in the structure
  'lp55xx_device_config'

 LED pattern data
  LP5562 has also internal program memory which is used for running various LED
  patterns. LP5562 driver supports the firmware interface and the predefined
  pattern data as well.

 LP5562 device attributes: 'led_pattern' and 'engine_mux'
  A 'led_pattern' is an index code which runs the predefined pattern data.
  And 'engine_mux' is updated with the firmware interface is activated.
  Detailed description has been updated in the documentation files,
  'leds-lp55xx.txt' and 'leds-lp5562.txt'.

 Changes on the header file
  LP5562 configurable definitions are added.
  Pattern RGB data is fixed as constant value.
  (No side effect on other devices, LP5521 or LP5523.)

(cooloney@gmail.com: remove redundant mutex_unlock(). Reported by Dan
Carpenter <dan.carpenter@oracle.com>)

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-04-01 11:04:48 -07:00
Linus Torvalds 0512c04a2b Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds
Pull LED subsystem update from Bryan Wu.

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (61 commits)
  leds: leds-sunfire: use dev_err()/pr_err() instead of printk()
  leds: 88pm860x: Add missing of_node_put()
  leds: tca6507: Use of_get_child_count()
  leds: leds-pwm: make it depend on PWM and not HAVE_PWM
  Documentation: leds: update LP55xx family devices
  leds-lp55xx: fix problem on removing LED attributes
  leds-lp5521/5523: add author and copyright description
  leds-lp5521/5523: use new lp55xx common header
  leds-lp55xx: clean up headers
  leds-lp55xx: clean up definitions
  leds-lp55xx: clean up unused data and functions
  leds-lp55xx: clean up _remove()
  leds-lp55xx: add new function for removing device attribtues
  leds-lp55xx: code refactoring on selftest function
  leds-lp55xx: use common device attribute driver function
  leds-lp55xx: support device specific attributes
  leds-lp5523: use generic firmware interface
  leds-lp5521: use generic firmware interface
  leds-lp55xx: support firmware interface
  leds-lp55xx: add new lp55xx_register_sysfs() for the firmware interface
  ...
2013-02-26 09:29:02 -08:00
Jingoo Han 4b07c5d512 leds: leds-sunfire: use dev_err()/pr_err() instead of printk()
Fixed the checkpatch errors and warnings as below:

  ERROR: spaces required around that '=' (ctx:VxW)
  WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 16:00:43 -08:00
Axel Lin 61d4eb2724 leds: 88pm860x: Add missing of_node_put()
of_find_node_by_name() returns a node pointer with refcount incremented, use
of_node_put() on it when done.

of_find_node_by_name() will call of_node_put() against from parameter,
thus we also need to call of_node_get(from) before calling
of_find_node_by_name().

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 16:00:43 -08:00
Axel Lin ef754e88e3 leds: tca6507: Use of_get_child_count()
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 16:00:42 -08:00
Peter Ujfalusi ad0ba85fab leds: leds-pwm: make it depend on PWM and not HAVE_PWM
The correct dependency for the leds-pwm is PWM and not HAVE_PWM
since PWM drivers now have their own subsystem.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 16:00:42 -08:00
Milo(Woogyom) Kim 109b833071 leds-lp55xx: fix problem on removing LED attributes
LP55XX common device attributes, 'led_current' and 'max_current' are created
 while loading the driver.
 Those are LED device attributes which are removed automatically on releasing
 led class devices - led_classdev_unregister().
 Therefore, this duplicate code should be removed.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 15:59:30 -08:00
Milo(Woogyom) Kim a2387cb9f6 leds-lp5521/5523: add author and copyright description
Now LP5521 and LP5523 drivers are based on new lp55xx structure.
 So the author and copyrights are updated.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 15:59:30 -08:00
Milo(Woogyom) Kim 79bcc10b8c leds-lp55xx: clean up headers
Remove unused headers and sort them alphabetically

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 15:59:30 -08:00
Milo(Woogyom) Kim 12f022d27b leds-lp55xx: clean up definitions
Remove unused definitions and change hex values to capital letters

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 15:59:30 -08:00
Milo(Woogyom) Kim 93ca4093ad leds-lp55xx: clean up unused data and functions
Old data structures and I2C function are not used any more.
 Each driver uses the lp55xx common data and functions.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 15:59:30 -08:00
Milo(Woogyom) Kim 87cc4bde2a leds-lp55xx: clean up _remove()
Replace lp5521/5523_unregister_sysfs() with lp55xx_unregister_sysfs().

 On unloading the driver, running engines should be stopped.
 Use explicit driver function, lp5521/5523_stop_engine().

 Unused functions are removed.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 15:59:29 -08:00
Milo(Woogyom) Kim ba6fa84651 leds-lp55xx: add new function for removing device attribtues
lp55xx_unregister_sysfs() is used for removing lp55xx device attributes.
 Chip specific and engine attributes are removed on unloading the driver.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 15:59:29 -08:00
Milo(Woogyom) Kim 9ca3bd8022 leds-lp55xx: code refactoring on selftest function
LP5521 and LP5523 have a selftest function which is run via the sysfs.
 Use lp55xx driver data and R/W functions rather than lp5521/5523 private data
 and functions.
 Additionally, if-statements are changed for code simplicity.
 Unused functions, lp5521/5523_read() are removed.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 15:59:29 -08:00
Milo(Woogyom) Kim e73c0ce6be leds-lp55xx: use common device attribute driver function
lp5521/5523_register_sysfs() are replaced with lp55xx common driver function,
 lp55xx_register_sysfs().
 Chip specific device attributes are configurable using 'dev_attr_group'.

 Error condition name is changed:
 use specific error condition, 'err_register_sysfs' rather than unclear name,
 'fail2'.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 15:59:29 -08:00
Milo(Woogyom) Kim 240085e255 leds-lp55xx: support device specific attributes
To support device specific attributes, new common driver function is added.
 Eventually those are created on registering the sysfs with common dev attrs.
 Furthermore, this patch makes adding device attributes simple in each driver.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 15:59:29 -08:00
Milo(Woogyom) Kim db6eaf8388 leds-lp5523: use generic firmware interface
LP55xx common driver provides generic firmware interface
 for running a LED pattern.
 LP5521 and LP5523 have many device attributes for running patterns.
 This patch cleans up those complex code.

 Removed device attributes:
 engine1_mode
 engine2_mode
 engine3_mode
 engine1_load
 engine2_load
 engine3_load
 engine1_leds
 engine2_leds
 engine3_leds

 All device attributes and functions are replaced with two callback functions,
 'firmware_cb' and 'run_engine'.

 New engine functions:
 lp5523_load/stop/run_engine(), lp5523_update_program_memory() and
 lp5523_wait_opmode_done()

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 15:59:29 -08:00
Milo(Woogyom) Kim 9ce7cb170f leds-lp5521: use generic firmware interface
LP55xx common driver provides generic firmware interface
 for running a LED pattern.
 LP5521 and LP5523 have many device attributes for running patterns.
 This patch cleans up those complex code.

 Removed device attributes:
 engine1_mode
 engine2_mode
 engine3_mode
 engine1_load
 engine2_load
 engine3_load
 led_pattern

 All device attributes and functions are replaced with two callback functions,
 'firmware_cb' and 'run_engine'.

 New engine functions:
 lp5521_load/stop/run_engine(), lp5521_update_program_memory() and
 lp5521_wait_opmode_done()

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 15:59:29 -08:00
Milo(Woogyom) Kim 10c06d178d leds-lp55xx: support firmware interface
This patch provides additional device attributes which enable
 loading the firmware. ('select_engine' and 'run_engine')
 To run a LED pattern, two parts of driver should be enabled.

 Common features : lp55xx-common
 ===============================
 Firmware interface for loading LED patterns

 Chip specific features : leds-lp5521, leds-lp5523
 =================================================
 Register addresses for loading firmware data
 Register addresses for running selected engine

 Pattern programming sequence
 ============================
 LP55xx chips have three program engines.
 To load and run a LED pattern, the programming sequence is as follows.
 (1) Select an engine number (1/2/3)
 (2) Set engine mode to load
 (3) Write pattern data into selected area
 (4) Set engine mode to run

 This sequence is almost same as the firmware interface.
 (1) Select an engine number               : 'select_engine' dev attribute
 (2) Mode change to load                   : 'loading' of firmware class
 (3) Write pattern data into selected area : 'data' of firmware class
 (4) Mode change to run                    : 'run_engine' dev attribute

 (1) and (4) are device specific features which provide callback functions
 (2) and (3) are common features.

 For example,
 echo 1 or 2 or 3 > /sys/bus/i2c/devices/xxxx/select_engine
 echo 1 > /sys/class/firmware/lp5521/loading
 echo "4000600040FF6000" > /sys/class/firmware/lp5521/data
 echo 0 > /sys/class/firmware/lp5521/loading
 echo 1 > /sys/bus/i2c/devices/xxxx/run_engine

 As soon as 'loading' is set to 0, registered callback is called.
 Inside the callback, the selected engine is loaded and memory is updated.
 To run programmed pattern, 'run_engine' attribute should be enabled.

 Device specific data structure
 ==============================
 o Firmware callback
   load selected engine and update program memory
 o Run engine
   change the engine mode
 o 'engine_idx' and firmware data, 'fw'
   Those are used in the driver internally with callback functions

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 15:59:28 -08:00
Milo(Woogyom) Kim b3b6f8119d leds-lp55xx: add new lp55xx_register_sysfs() for the firmware interface
LP55xx family chips have internal program memory which run various patterns.
 Using this memory, LEDs continue on blinking/dimming without continuous I2C
 commands. That means the I2C HOST can be entered into sleep once the memory
 is updated.

 An application can get hex data from a file and write them into
 the program memory through the I2C. This is general firwmare interface.

 This patch is the initial step for adding the firmware interface.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 15:59:28 -08:00
Milo(Woogyom) Kim d9067d2846 leds-lp55xx: fix error condition in lp55xx_register_leds()
Use lp55xx_unregister_leds() rather than duplicate code.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 15:59:28 -08:00
Milo(Woogyom) Kim c3a68ebfcd leds-lp55xx: use lp55xx_unregister_leds()
To unregister led class devices and sysfs attributes,
 LP5521 and LP5523 have each driver function.
 This patch makes both drivers simple using common driver function,
 lp55xx_unregister_leds().

 And some unused variables are removed.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 15:59:28 -08:00
Milo(Woogyom) Kim a96bfa135d leds-lp55xx: provide common LED current setting
LED current is configurable via the sysfs.
 Max current is a read-only attribute.
 These attributes code can be shared in lp55xx common driver.

 Device attributes: 'led_current' and 'max_current'
 move to lp55xx common driver

 Replaced functions:
 show_max_current()  => lp55xx_show_max_current()
 show_current()      => lp55xx_show_current()
 store_current()     => lp55xx_store_current()

 LED setting function: set_led_current()
 Current registers are device specific, so configurable function is added
 in each driver.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 15:59:28 -08:00
Milo(Woogyom) Kim a6e4679a09 leds-lp55xx: use lp55xx_set_brightness()
lp5521_set_brightness() and lp5523_set_brightness() are replaced with
 common function, lp55xx_set_brightness().
 This function is invoked when the brightness of each LED channel is updated.
 LP5521 and LP5523 have different register address for the brightness control,
 so this work is done by chip specific brightness_work_fn().

 lp5521/5523_led_brightness_work():
 use lp55xx_led and lp55xx_chip data structure.
 use lp55xx write function.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 15:59:28 -08:00
Milo(Woogyom) Kim 0e2023463a leds-lp55xx: use lp55xx_init_led() common function
lp5521_init_led() and lp5523_init_led() are replaced with one common function,
 lp55xx_init_led().
 Max channels is configurable, so it's used in lp55xx_init_led().

 'LP5523_LEDS' are changed to 'LP5523_MAX_LEDS'.

 lp55xx_set_brightness, lp55xx_led_attributes: skeleton
 Will be filled in next patches.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 15:59:28 -08:00
Milo(Woogyom) Kim 9e9b3db1b2 leds-lp55xx: use lp55xx common led registration function
LED class devices are registered in lp5521_register_leds() and
 lp5523_register_leds().
 Two separate functions are merged into consolidated lp55xx function,
 lp55xx_register_leds().

 Error handling fix:
 Unregistering LEDS are handled in lp55xx_register_leds() when LED registration
 failure occurs. So each driver error handler is changed to 'err_register_leds'

 Chip dependency: 'brightness_work_fn' and 'set_led_current'
 To make the structure abstract, both functions are configured in each driver.
 Those functions should be done by each driver because register control is
 chip-dependant work.

 lp55xx_init_led: skeleton
 Will be filled in next patch

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 15:59:28 -08:00
Milo(Woogyom) Kim 6ce6176263 leds-lp55xx: use lp55xx common deinit function
Two separate de-init functions are merged into one common function.
 And it is used in err_post_init of lp55xx_init_device().

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 15:59:27 -08:00
Milo(Woogyom) Kim 22ebeb488b leds-lp55xx: clean up init function
lp5521/5523_init_device() are replaced with lp55xx common function,
 lp55xx_init_device().

 Error handler in init_device:
 deinit function are matched with 'err_post_init' section in
 lp55xx_init_device().

 Remove LP5523 engine intialization code:
 Engine functionality is not mandatory but optional.
 Moreover engine initialization is done internally with device reset command.
 Therefore, this code is unnecessary.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 15:59:27 -08:00
Milo(Woogyom) Kim ffbdccdbba leds-lp55xx: use lp55xx common init function - post int
LP5521/5523 chip configuration is replaced with lp55xx common function,
 lp55xx_post_init_device().

 Name change:
 lp5521/5523_configure() to lp5521/5523_post_init_device()
 These are called in init function.

 Register access function
 Argument type is changed from 'i2c_client' to 'lp55xx_chip'.
 Use exported R/W functions of lp55xx common driver.

 Temporary variables in lp5521/5523_init_device()
 These functions will be removed but temporary variables are needed for
 blocking build warnings - incompatible pointer.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06 15:59:27 -08:00