Commit Graph

7044 Commits

Author SHA1 Message Date
Martin Liška 0c4a5bcea4 perf annotate: Display total number of samples with --show-total-period
To compare two records on an instruction base, with --show-total-period
option provided, display total number of samples that belong to a line
in assembly language.

New hot key 't' is introduced for 'perf annotate' TUI.

Signed-off-by: Martin Liska <mliska@suse.cz>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/5583E26D.1040407@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-19 16:39:18 -03:00
Adrian Hunter a5499b3719 perf tools: Ensure thread-stack is flushed
The thread-stack represents a thread's current stack.  When a thread
exits there can still be many functions on the stack e.g. exit() can be
called many levels deep, so all the callers will never return.  To get
that information output, the thread-stack must be flushed.

Previously it was assumed the thread-stack would be flushed when the
struct thread was deleted.  With thread ref-counting it is no longer
clear when that will be, if ever. So instead explicitly flush all the
thread-stacks at the end of a session.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1432906425-9911-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-19 16:03:33 -03:00
Sam bobroff b4b56f9eca powerpc/tm: Abort syscalls in active transactions
This patch changes the syscall handler to doom (tabort) active
transactions when a syscall is made and return very early without
performing the syscall and keeping side effects to a minimum (no CPU
accounting or system call tracing is performed). Also included is a
new HWCAP2 bit, PPC_FEATURE2_HTM_NOSC, to indicate this
behaviour to userspace.

Currently, the system call instruction automatically suspends an
active transaction which causes side effects to persist when an active
transaction fails.

This does change the kernel's behaviour, but in a way that was
documented as unsupported.  It doesn't reduce functionality as
syscalls will still be performed after tsuspend; it just requires that
the transaction be explicitly suspended.  It also provides a
consistent interface and makes the behaviour of user code
substantially the same across powerpc and platforms that do not
support suspended transactions (e.g. x86 and s390).

Performance measurements using
http://ozlabs.org/~anton/junkcode/null_syscall.c indicate the cost of
a normal (non-aborted) system call increases by about 0.25%.

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-19 17:10:28 +10:00
Rafael J. Wysocki a8269d36a8 Merge branches 'pnp' and 'pm-tools'
* pnp:
  PNP / ACPI: use unsigned int in pnpacpi_encode_resources()
  PNP / ACPI: use u8 instead of int in acpi_resource_extended_irq context

* pm-tools:
  cpupower: mperf monitor: fix output in MAX_FREQ_SYSFS mode
2015-06-19 01:18:43 +02:00
John Stultz 51a16c1e88 selftest: Timers: Avoid signal deadlock in leap-a-day
In 0c4a5fc95b (Add leap-second timer edge testing to
leap-a-day.c), we added a timer to the test which checks to make
sure timers near the leapsecond edge behave correctly.

However, the output generated from the timer uses ctime_r, which
isn't async-signal safe, and should that signal land while the
main test is using ctime_r to print its output, its possible for
the test to deadlock on glibc internal locks.

Thus this patch reworks the output to avoid using ctime_r in
the signal handler.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1434565003-3386-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-18 15:28:14 +02:00
Kees Cook c99ee51a9d selftests: add seccomp suite
This imports the existing seccomp test suite into the kernel's selftests
tree. It contains extensive testing of seccomp features and corner cases.
There remain additional tests to move into the kernel tree, but they have
not yet been ported to all the architectures seccomp supports:
https://github.com/redpig/seccomp/tree/master/tests

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-06-17 17:12:32 -06:00
Arnaldo Carvalho de Melo 5d484f99ae perf top: Allow disabling/enabling events dynamicly
Now it is possible to press CTRL+z at anytime and that will disable the
events being monitored, essentially turning 'top' into 'report', with
pressing CTRL+z again making it enable the events again, returning to
the 'top' behaviour, i.e. dynamic + decaying of older samples.

One may want, for instance, play with:

    -d, --delay <n>       number of seconds to delay between refreshes

and:

    -z, --zero            zero history across updates

Plus CTRL+z to see only the events since last zeroing, etc.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zq7tnh5462blt2yda0bcxh5b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-17 16:50:52 -03:00
Arnaldo Carvalho de Melo 2b56bcfb6f perf evlist: Add toggle_enable() method
For an upcoming feature in 'perf top' we will have a hotkey to
enable/disable events, so remember if the events in the list are
enabled or disabled and allows toggling this state using a new
method.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-64c4jvdl5feg2zhimxvokqka@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-17 16:40:26 -03:00
Sukadev Bhattiprolu 7951722da2 perf trace: Fix race condition at the end of started workloads
I get following crash on multiple systems and across several releases
(at least since v3.18).

	Core was generated by `/tmp/perf trace sleep 0.2 '.
	Program terminated with signal SIGSEGV, Segmentation fault.
	#0  perf_mmap__read_head (mm=0x3fff9bf30070) at util/evlist.h:195
	195		u64 head = ACCESS_ONCE(pc->data_head);
	(gdb) bt
	#0  perf_mmap__read_head (mm=0x3fff9bf30070) at util/evlist.h:195
	#1  perf_evlist__mmap_read (evlist=0x10027f11910, idx=<optimized out>)
	    at util/evlist.c:637
	#2  0x000000001003ce4c in trace__run (argv=<optimized out>,
	    argc=<optimized out>, trace=0x3fffd7b28288) at builtin-trace.c:2259
	#3  cmd_trace (argc=<optimized out>, argv=<optimized out>,
	    prefix=<optimized out>) at builtin-trace.c:2799
	#4  0x00000000100657b8 in run_builtin (p=0x10176798 <commands+480>, argc=3,
	    argv=0x3fffd7b2b550) at perf.c:370
	#5  0x00000000100063e8 in handle_internal_command (argv=0x3fffd7b2b550, argc=3)
	    at perf.c:429
	#6  run_argv (argv=0x3fffd7b2af70, argcp=0x3fffd7b2af7c) at perf.c:473
	#7  main (argc=3, argv=0x3fffd7b2b550) at perf.c:588

The problem seems to be a race condition, when the application has just
exited.  Some/all fds associated with the perf-events (tracepoints) go
into a POLLHUP/ POLLERR state and the mmap region associated with those
events are unmapped (in perf_evlist__filter_pollfd()).

But we go back and do a perf_evlist__mmap_read() which assumes that the
mmaps are still valid and we hit the crash.

If the mapping for an event is released, its refcnt is 0 (and ->base
is NULL), so ensure we have non-zero refcount before accessing the map.

Note that perf-record has a similar logic but unlike perf-trace, the
record__mmap_read_all() checks the evlist->mmap[i].base before accessing
the map.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20150612060003.GA19913@us.ibm.com
[ Fixed it up to use atomic_read() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-17 16:38:48 -03:00
Masami Hiramatsu 7737af010b perf probe: Speed up perf probe --list by caching debuginfo
Speed up the "perf probe --list" by caching the last used debuginfo.
perf probe --list always open and load debuginfo for each entry of probe
list. This takes very a long time.

E.g. with vfs_* events (total 96 probes)

  [root@localhost perf]# time  ./perf probe -l &> /dev/null

  real    0m25.376s
  user    0m24.381s
  sys     0m1.012s

To solve this issue, this adds debuginfo_cache to cache the
last used debuginfo on memory.

With this fix, the perf-probe --list significantly improves
its speed.

  [root@localhost perf]#  time  ./perf probe -l &> /dev/null

  real    0m0.161s
  user    0m0.136s
  sys     0m0.025s

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150617145854.19715.15314.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-17 16:37:53 -03:00
Masami Hiramatsu d350bd571f perf probe: Show usage even if the last event is skipped
When the last part of converted events are blacklisted or out-of-text,
those are skipped and perf probe doesn't show usage examples.  This
fixes it to show the example even if the last part of event list is
skipped.

E.g. without this patch, events are added, but suddenly end:

  # perf probe vfs_*
  vfs_caches_init_early is out of .text, skip it.
  vfs_caches_init is out of .text, skip it.
  Added new events:
    probe:vfs_fallocate  (on vfs_*)
    probe:vfs_open       (on vfs_*)
  ...
    probe:vfs_dentry_acceptable (on vfs_*)
    probe:vfs_load_quota_inode (on vfs_*)
  #

With this fix:

  # perf probe vfs_*
  vfs_caches_init_early is out of .text, skip it.
  vfs_caches_init is out of .text, skip it.
  Added new events:
    probe:vfs_fallocate  (on vfs_*)
  ...
    probe:vfs_load_quota_inode (on vfs_*)

  You can now use it in all perf tools, such as:

	perf record -e probe:vfs_load_quota_inode -aR sleep 1

Note that this can be reproduced ONLY IF the vfs_caches_init* is the
last part of matched symbol list. I've checked this happens on
"3.19.0-generic #18-Ubuntu" kernel binary.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150616115057.19906.5502.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-17 16:31:42 -03:00
Wang Nan 5d618324dd perf tools: Move libtraceevent dynamic list to separated LDFLAGS variable
Commit e3d09ec812 ("tools lib traceevent:
Export dynamic symbols used by traceevent plugins") adds libtraceevent
dynamic list directly into LDFLAGS, which makes all targets depend on
that list through LDFLAGS.

This is not good since some of targets like libgtk.so doesn't use plugin
at all, but require the existance of that list because of linker
options.

This patch isolates the -Xlink option into LIBTRACEEVENT_DYNAMIC_LIST_LDFLAGS,
makes only perf and perf.so use it.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1434552389-89144-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-17 16:29:25 -03:00
Wang Nan b30b617292 perf tools: Fix a problem when opening old perf.data with different byte order
Following error occurs when trying to use 'perf report' on x86_64 to
cross analysis a perf.data generated by an old perf on a big-endian
machine:

 # perf report
 *** Error in `/home/w00229757/perf': free(): invalid next size (fast): 0x00000000032c99f0 ***
 ======= Backtrace: =========
 /lib64/libc.so.6(+0x6eeef)[0x7ff6ff7e2eef]
 /lib64/libc.so.6(+0x78cae)[0x7ff6ff7eccae]
 /lib64/libc.so.6(+0x79987)[0x7ff6ff7ed987]
 /path/to/perf[0x4ac734]
 /path/to/perf[0x4ac829]
 /path/to/perf(perf_header__process_sections+0x129)[0x4ad2c9]
 /path/to/perf(perf_session__read_header+0x2e1)[0x4ad9e1]
 /path/to/perf(perf_session__new+0x168)[0x4bd458]
 /path/to/perf(cmd_report+0xfa0)[0x43eb70]
 /path/to/perf[0x47adc3]
 /path/to/perf(main+0x5f6)[0x42fd06]
 /lib64/libc.so.6(__libc_start_main+0xf5)[0x7ff6ff795bd5]
 /path/to/perf[0x42fe35]
 ======= Memory map: ========
 [SNIP]

The bug is in perf_event__attr_swap(). It swaps all fields in 'struct
perf_event_attr' without checking whether the swapped field exist or
not. In addition, in read_event_desc() allocs memory for attr according
to size read from perf.data.

Therefore, if the perf.data is collected by an old perf (without
aux_watermark, for example), when perf_event__attr_swap() swaping
attr->aux_watermark it destroy malloc's metadata.

This patch introduces boundary checking in perf_event__attr_swap(). It
adds macros bswap_field_64 and bswap_field_32 into
perf_event__attr_swap() to make it only swap exist fields.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1434534999-85347-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-17 16:28:08 -03:00
Wang Nan 386299735e perf tools: Ignore .config-detected in .gitignore
Commit fcfd6611fb ("tools build: Add
detected config support") dynamically creates .config-detected. Add it
to .gitignore.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1434542358-5430-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-17 12:44:55 -03:00
Masami Hiramatsu b031220d52 perf probe: Fix to return error if no probe is added
Fix perf probe to return an error if no probe is added due to the given
probe point being on the blacklist.

To fix this problem, this moves the blacklist checking to right after
finding symbols/probe-points and marks them as skipped.

If all the symbols are skipped, "perf probe"  returns an error as it
fails to find the corresponding probe address.

E.g. currently if a blacklisted probe is given:

  # perf probe do_trap && echo 'succeed'
  Added new event:
  Warning: Skipped probing on blacklisted function: sync_regs
  succeed

No! It must fail! With this patch, it correctly fails:

  # perf probe do_trap && echo 'succeed'
  do_trap is blacklisted function, skip it.
  Probe point 'do_trap' not found.
    Error: Failed to add events.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150616115055.19906.31359.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-16 11:39:51 -03:00
Hou Pengyang f005813afb perf unwind: Fix a compile error
When libunwind is on, there is a compile error as :

  util/unwind-libunwind.c:363:21: error: 'dso' undeclared (first use in this function)
      dso__data_put_fd(dso);

This patch fixes it.

Signed-off-by: Hou Pengyang <houpengyang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 4bb11d012a ("perf tools: Add dso__data_get/put_fd()")
Link: http://lkml.kernel.org/r/1434453395-10560-1-git-send-email-houpengyang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-16 10:40:03 -03:00
Jiri Olsa 9df38e82e2 perf stat: Introduce perf_counts__(new|delete|reset) functions
Move 'struct perf_counts' allocation|free|reset code into separate
functions.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1434269985-521-13-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-16 10:34:41 -03:00
Jiri Olsa a9a3a4d92d perf tools: Move perf_evsel__(alloc|free|reset)_counts into stat object
It's stat specific. Updating python build objects with stat.c.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1434269985-521-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-16 10:34:40 -03:00
Jiri Olsa 9d7e8c3a96 perf tools: Add thread_map__(alloc|realloc) helpers
In order to have 'struct thread_map' allocation on single place and can
change it easily in following patch.

Using alloc|realloc for static helpers, because thread_map__new is
already used in public interface.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1434269985-521-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-16 10:34:40 -03:00
Jiri Olsa b45f65e8fd perf tools: Introduce xyarray__reset function
To zero all the xyarray contents. It will be used in following patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1434269985-521-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-16 10:34:39 -03:00
Masami Hiramatsu ba7ecb02e7 perf probe: List probes in stdout
Since commit 5e17b28f1e ("perf probe: Add --quiet option to
suppress output result message") have replaced printf with pr_info,
perf probe -l outputs its result in stderr. However, that is not
what the commit expected.

E.g.:

  # perf probe -l > /dev/null
    probe:vfs_read       (on vfs_read@ksrc/linux-3/fs/read_write.c)

With this fix:

  # perf probe -l > list
  # cat list
    probe:vfs_read       (on vfs_read@ksrc/linux-3/fs/read_write.c)

Of course, --quiet(-q) still works on --add/--del.

  # perf probe -q vfs_write
  # perf probe -l
    probe:vfs_read       (on vfs_read@ksrc/linux-3/fs/read_write.c)
    probe:vfs_write      (on vfs_write@ksrc/linux-3/fs/read_write.c)
  -----

Reported-by: Naohiro Aota <naota@elisp.net>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150613013116.24402.2923.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-16 10:34:39 -03:00
Wang Nan a35489a6a2 tools lib traceevent: Fix python/perf.so compiling error
'make build-test' finds an error that make_python_perf_so fails due to
missing of libtraceevent-dynamic-list:

 '.../python2' util/setup.py \
   --quiet build_ext; \
   mkdir -p python && \
   cp python_ext_build/lib/perf.so python/
   /path/to/ld: cannot open linker script file /path/to/kernel/tools/lib/traceevent/libtraceevent-dynamic-list: No such file or directory
   collect2: error: ld returned 1 exit status
   error: command 'x86_64-linux-gcc' failed with exit status 1
   cp: cannot stat 'python_ext_build/lib/perf.so': No such file or directory
   make[3]: *** [python/perf.so] Error 1
   make[2]: *** [python/perf.so] Error 2
     test: test -f ./python/perf.so
     make[1]: *** [make_python_perf_so] Error 1
     make: *** [build-test] Error 2
     make: Leaving directory `/path/to/kernel/tools/perf'

This is caused by commit e3d09ec812
("tools lib traceevent: Export dynamic symbols used by traceevent
plugins") that, it adds the list file to LDFLAGS but forgot to add it to
dependency list of python/perf.so.

This patch fixes this problem.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1434079031-123162-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-16 10:34:38 -03:00
Arnaldo Carvalho de Melo 5c24b67aae perf tools: Replace map->referenced & maps->removed_maps with map->refcnt
Use just reference counts, so that when no more hist_entry instances
references a map and the thread instance goes away by processing a
PERF_RECORD_EXIT, we can delete the maps.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-oym7lfhcc7ss6xpz44h7nbxs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-16 10:34:38 -03:00
Masami Hiramatsu 35a23ff928 perf probe: Cut off the gcc optimization postfixes from function name
Cut off the postfixes which gcc added for optimized routines from the
event name automatically generated from symbol name, since *probe-events
doesn't accept it.  Those symbols will be used if we don't use debuginfo
to find target functions.

E.g. without this fix;
  -----
  # perf probe -va alloc_buf.isra.23
  probe-definition(0): alloc_buf.isra.23
  symbol:alloc_buf.isra.23 file:(null) line:0 offset:0 return:0 lazy:(null)
  [...]
  Opening /sys/kernel/debug/tracing/kprobe_events write=1
  Added new event:
  Writing event: p:probe/alloc_buf.isra.23 _text+4869328
  Failed to write event: Invalid argument
    Error: Failed to add events. Reason: Invalid argument (Code: -22)
  -----
With this fix;
  -----
  perf probe -va alloc_buf.isra.23
  probe-definition(0): alloc_buf.isra.23
  symbol:alloc_buf.isra.23 file:(null) line:0 offset:0 return:0 lazy:(null)
  [...]
  Opening /sys/kernel/debug/tracing/kprobe_events write=1
  Added new event:
  Writing event: p:probe/alloc_buf _text+4869328
    probe:alloc_buf      (on alloc_buf.isra.23)

  You can now use it in all perf tools, such as:

  	perf record -e probe:alloc_buf -aR sleep 1

  -----

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150612050820.20548.41625.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-12 16:14:48 -03:00
John Stultz 0c4a5fc95b selftests: timers: Add leap-second timer edge testing to leap-a-day.c
Prarit reported an issue w/ timers around the leapsecond, where a
timer set for Midnight UTC (00:00:00) might fire a second early right
before the leapsecond (23:59:60 - though it appears as a repeated
23:59:59) is applied.

So I've updated the leap-a-day.c test to integrate a similar test,
where we set a timer and check if it triggers at the right time, and
if the ntp state transition is managed properly.

Reported-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Reported-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1434063297-28657-6-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12 11:15:50 +02:00
David Ahern c8ad706362 perf tools: Update MANIFEST per files removed from kernel
Building perf out of kernel tree is currently broken because the
MANIFEST file refers to kernel files that have been removed. With this
patch make perf-targz-src-pkg succeeds as does building perf using the
generated tarfile.

Signed-off-by: David Ahern <david.ahern@oracle.com>
Link: http://lkml.kernel.org/r/1433526173-172332-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-11 22:54:23 -03:00
Arnaldo Carvalho de Melo a1c2552dba trace: Beautify perf_event_open syscall
Syswide tracing and then running 'stat' and 'trace':

 $ perf trace -e perf_event_open
 1034.649 (0.019 ms): perf/6133 perf_event_open(attr_uptr: 0x36f0360, pid: 16134, cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = -1 EINVAL Invalid argument
 1034.670 (0.008 ms): perf/6133 perf_event_open(attr_uptr: 0x36f0360, pid: 16134, cpu: -1, group_fd: -1) = -1 EINVAL Invalid argument
 1034.681 (0.007 ms): perf/6133 perf_event_open(attr_uptr: 0x36f0360, pid: 16134, cpu: -1, group_fd: -1) = -1 EINVAL Invalid argument
 1034.692 (0.007 ms): perf/6133 perf_event_open(attr_uptr: 0x36f0360, pid: 16134, cpu: -1, group_fd: -1) = -1 EINVAL Invalid argument
 9986.983 (0.014 ms): trace/6139 perf_event_open(attr_uptr: 0x7ffd9c629320, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
 9987.026 (0.016 ms): trace/6139 perf_event_open(attr_uptr: 0x37c7e70, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
 9987.041 (0.008 ms): trace/6139 perf_event_open(attr_uptr: 0x37c7e70, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
 9987.489 (0.092 ms): trace/6139 perf_event_open(attr_uptr: 0x3795ee0, pid: 16140, group_fd: -1, flags: FD_CLOEXEC) = 3
 9987.536 (0.044 ms): trace/6139 perf_event_open(attr_uptr: 0x3795ee0, pid: 16140, cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 4
 9987.580 (0.041 ms): trace/6139 perf_event_open(attr_uptr: 0x3795ee0, pid: 16140, cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 5
 9987.620 (0.037 ms): trace/6139 perf_event_open(attr_uptr: 0x3795ee0, pid: 16140, cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 7
 9987.659 (0.035 ms): trace/6139 perf_event_open(attr_uptr: 0x37975d0, pid: 16140, group_fd: -1, flags: FD_CLOEXEC) = 8
 9987.692 (0.031 ms): trace/6139 perf_event_open(attr_uptr: 0x37975d0, pid: 16140, cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 9
 9987.727 (0.032 ms): trace/6139 perf_event_open(attr_uptr: 0x37975d0, pid: 16140, cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 10
 9987.761 (0.031 ms): trace/6139 perf_event_open(attr_uptr: 0x37975d0, pid: 16140, cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 11

Need to intercept perf_copy_attr() with a kprobe or with eBPF...

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-njb105hab2i3t5dexym9lskl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-11 22:47:54 -03:00
He Kuang 6ba29c2fa5 perf tools: Fix build failure on 32-bit arch
Failed in 32bit arch build like this:

    CC       /opt/h00206996/output/perf/arm32/builtin-record.o
  util/session.c: In function ‘perf_session__warn_about_errors’:
  util/session.c:1304:9: error: format ‘%lu’ expects argument of type ‘long unsigned int’,
                         but argument 2 has type ‘long long unsigned int’ [-Werror=format=]

  builtin-report.c: In function ‘perf_evlist__tty_browse_hists’:
  builtin-report.c:323:2: error: format ‘%lu’ expects argument of type ‘long unsigned int’,
                          but argument 3 has type ‘u64’ [-Werror=format=]

Replace %lu format strings in warning message with PRIu64 for u64
'total_lost_samples' to fix this problem.

Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1434026664-71642-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-11 11:14:21 -03:00
Kan Liang cb5ef60067 perf stat: Error out unsupported group leader immediately
perf stat ignores the unsupported event and continue to count supported
event. But if the unsupported event is group leader, perf tool will
crash. After applying this patch, the unsupported group leader will
error out immediately.

Without this patch:

  $ perf stat -x, -e '{node-prefetch-refs,cycles}' --  sleep 1
  perf: util/evsel.c:1009: get_group_fd: Assertion `!(fd == -1)' failed.
  Aborted (core dumped)

With this patch:

  $ perf stat -x, -e '{node-prefetch-refs,cycles}' --  sleep 1
  Error:
  The node-prefetch-refs event is not supported.

Commiter note: Here I got a different output, but no core dump:

  [acme@zoo linux]$ perf stat -x, -e '{node-prefetch-refs,cycles}' -- sleep 1
  Error:
  The sys_perf_event_open() syscall returned with 22 (Invalid argument)
  for event (node-prefetch-refs).
  /bin/dmesg may provide additional information.
  No CONFIG_PERF_EVENTS=y kernel support configured?

Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Link: http://lkml.kernel.org/r/1434004360-8570-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-11 11:07:40 -03:00
Adrian Hunter 7310aed77e perf evsel: Display 0x for hex values when printing the attribute
Need to display '0x' prefix for hex values otherwise it is not obvious
they are hex.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1434027064-7554-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-11 10:56:01 -03:00
Greg Kroah-Hartman 78a66b00d9 Third round of new IIO drivers, cleanups and functionality for the 4.2 cycle.
Given Linus announced a 4.8rc coming up, hopefully time for one more
 lot of IIO patches this cycle.  Some of these are actually
 improvements / fixes for patches earlier in the cycle.
 
 New device support
 * st_accel driver - support devices with 8 bit channels.
 
 Cleanup
 * A general cleanup of the iio tools under /tools/ from Hartmut.
   I'm more than a little embarassed by how bad some of these were! Are well,
   much more refined and less bug prone now.
   These cover lots of stuff like unhandled error returns, memory leaks as
   well as general refactoring to tidy the code up.
 * iio_simple_dummy - fix memory leaks in the init functions, drop some
   pointless error returns from functions that never generate errors and
   make the module parameter explicitly unsigned.
 * More buffer handling reworks from Lars-Peter, this time targetting hardware
   buffers (a little used corner that looks likely to get more use in the near
   future). Specifically:
   - Always compute the masklength as inkernel buffer users may need it.
   - Add a means of labeling which buffer modes a given buffer implementation
     supports.
   - In the case of hardware buffers, require strict scan matching rather than
     matching to a superset.  Currently the demux is bypassed by these drivers
     (this may well not change for efficiency reasons) so allowing a superset
     of channels to be selected would otherwise lead to more data than requested
     confusing userspace.
 
 Driver funcationality improvments
 * mmc35240 - adds a compensation to the raw values as borrowed form Memsic's
   own input driver.
 * mma8452
   - event support
   - event debouncing
   - high  pass filter configuration
   - triggers
 * vf610 - allow conversion mode to be adjusted
 
 Fixlets
 * mmc35240
   - Off by one error that by coincidence had no real effect.
   - i2c_device_name should be lowercase.
   - Lack of null terminator at end of attributes array.
   - Avoid computing the fractional part of the magnetic field by moving
     the scaling into userspace where floating point is available to simplify
     the maths.
   - Use a smaller sleep before assuming the measurement is done.  This is
     safe and improves the possible polling rate.
   - Fix sensitivity on z-axis - datasheet disagrees with Memsic's releasedd
     code and the value used in the code seems to be correct.
 * stk3310 - make a local variable signed to ensure error handling works.
 * twl4030
   - fix calculation of the temperature sense current - bug unlikely
     to have ever been noticed as the difference is small.
   - Fix errors in descriptions.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVdgz8AAoJEFSFNJnE9BaIMSoP/RYq9yzkRtQ+T7ZnxdW0uaVK
 W8zhcg9W62dKbu0ccMVI+ESv9bg+3Ti/ZHE2251olYzXER5qrUUqB7llpgJeoni+
 ft1RyOZYYTWqv/2fx9Jdn+h4792tv4nykdgY3YhxR3anPD5Tb3PcRryCJ739d6xL
 c8HZedMP9znbC7BiEzRcLBPiyiv+NFKHF0T6LCkwlTGoe6q+8yaW1blmxTRmtpnD
 Wpf08/vafBmbjUmxfcvtgyOr73D6/kNOk9xYtvbQguD5nG5oHRe96nlaTtW7//hi
 ybP0q+UPV7Hss1pgufEZufPfWglsqOpIWJ7diUyXzvf9x7FAUd2nuiAHKybUg4bT
 yC2dSCVgRAa1zLEwcTub5MNtjkcfM0l9wsnCCIssD5p9s4EEenge1UjHsV7zm/KA
 JzBKBRz98Mo6m+F2gWZkkpuIb9UbI99oLBVDzhFBYf77b1L8curJ+pBH2lcICMun
 K5+WC3itkl7QImbyrCXdHmu9/oWS2+MSVHsmmL4omMFb071/C1iAUCIJahJrbgcy
 jIjaNJp3WgOplQp4tlP6WtsbzHh0DzjjLj+RKFv2mqYMlHhhAFdoH68qXPxG3kYo
 IxyGh7sH7ic5BQyt4B8/GhxakDuf55O/kyS7t01B3c5JbJp/IAbobfWkpCtuICYV
 GIIZTKI5kJb1Q8P7AbUD
 =sNVc
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-v4.2c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Third round of new IIO drivers, cleanups and functionality for the 4.2 cycle.

Given Linus announced a 4.8rc coming up, hopefully time for one more
lot of IIO patches this cycle.  Some of these are actually
improvements / fixes for patches earlier in the cycle.

New device support
* st_accel driver - support devices with 8 bit channels.

Cleanup
* A general cleanup of the iio tools under /tools/ from Hartmut.
  I'm more than a little embarassed by how bad some of these were! Are well,
  much more refined and less bug prone now.
  These cover lots of stuff like unhandled error returns, memory leaks as
  well as general refactoring to tidy the code up.
* iio_simple_dummy - fix memory leaks in the init functions, drop some
  pointless error returns from functions that never generate errors and
  make the module parameter explicitly unsigned.
* More buffer handling reworks from Lars-Peter, this time targetting hardware
  buffers (a little used corner that looks likely to get more use in the near
  future). Specifically:
  - Always compute the masklength as inkernel buffer users may need it.
  - Add a means of labeling which buffer modes a given buffer implementation
    supports.
  - In the case of hardware buffers, require strict scan matching rather than
    matching to a superset.  Currently the demux is bypassed by these drivers
    (this may well not change for efficiency reasons) so allowing a superset
    of channels to be selected would otherwise lead to more data than requested
    confusing userspace.

Driver funcationality improvments
* mmc35240 - adds a compensation to the raw values as borrowed form Memsic's
  own input driver.
* mma8452
  - event support
  - event debouncing
  - high  pass filter configuration
  - triggers
* vf610 - allow conversion mode to be adjusted

Fixlets
* mmc35240
  - Off by one error that by coincidence had no real effect.
  - i2c_device_name should be lowercase.
  - Lack of null terminator at end of attributes array.
  - Avoid computing the fractional part of the magnetic field by moving
    the scaling into userspace where floating point is available to simplify
    the maths.
  - Use a smaller sleep before assuming the measurement is done.  This is
    safe and improves the possible polling rate.
  - Fix sensitivity on z-axis - datasheet disagrees with Memsic's releasedd
    code and the value used in the code seems to be correct.
* stk3310 - make a local variable signed to ensure error handling works.
* twl4030
  - fix calculation of the temperature sense current - bug unlikely
    to have ever been noticed as the difference is small.
  - Fix errors in descriptions.
2015-06-10 20:48:34 -07:00
Peter Zijlstra 5610032135 perf record: Amend option summaries
Because there's too many options and I cannot read, I frequently get
confused between -c and -P, and try to do things like:

  perf record -P 50000 -- foo

Which does not work; try and make the option description slightly longer
and hopefully less confusing.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150610144850.GP19282@twins.programming.kicks-ass.net
[ Do those changes on the man page as well ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-10 12:00:27 -03:00
Milos Vyletel d7c72606d9 perf tools: Avoid possible race condition in copyfile()
Use unique temporary files when copying to buildid dir to prevent races
in case multiple instances are trying to copy same file. This is done by

- creating template in form <path>/.<filename>.XXXXXX where the suffix is
  used by mkstemp() to create unique file
- change file mode
- copy content
- if successful link temp file to target file
- unlink temp file

At this point the only file left at target path should be the desired
one either created by us or other instance if we raced. This should also
prevent not yet fully copied files to be visible to to other perf
instances that could try to parse them.

On top of that slow_copyfile no longer needs to deal with file mode when
creating file since temporary file is already created and mode is set.

Succesfully tested by myself by running perf record, archive and reading
the data on other system and by running perf buildid-cache on perf
binary itself. I also did revert fix from 0635b0f that to exposes
previously fixed race with EEXIST and recreator test passed sucessfully.

Signed-off-by: Milos Vyletel <milos@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1433775018-19868-1-git-send-email-milos@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-10 11:51:24 -03:00
David S. Miller 941742f497 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2015-06-08 20:06:56 -07:00
Jonathan Corbet f8785d94fc Merge branch 'doc/4.2' into docs-next 2015-06-08 17:04:11 -06:00
Pali Rohár b3fd7368f8 Move freefall program from Documentation/ to tools/
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-06-08 16:42:07 -06:00
Greg Kroah-Hartman 6394d6d01b Merge 4.1-rc7 into staging-testing
We want the staging tree fixes in here too to help with testing and
merge issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-08 10:34:44 -07:00
Arnaldo Carvalho de Melo d3a7c489c7 perf tools: Reference count struct dso
This has a different model than the 'thread' and 'map' struct lifetimes:
there is not a definitive "don't use this DSO anymore" event, i.e. we may
get many 'struct map' holding references to the '/usr/lib64/libc-2.20.so'
DSO but then at some point some DSO may have no references but we still
don't want to straight away release its resources, because "soon" we may
get a new 'struct map' that needs it and we want to reuse its symtab or
other resources.

So we need some way to garbage collect it when crossing some memory
usage threshold, which is left for anoter patch, for now it is
sufficient to release it when calling dsos__exit(), i.e. when deleting
the whole list as part of deleting the 'struct machine' containing it,
which will leave only referenced objects being used.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-majzgz07cm90t2tejrjy4clf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 10:31:40 -03:00
Arnaldo Carvalho de Melo e880784422 perf tools: Protect accesses the dso rbtrees/lists with a rw lock
To allow concurrent access, next step: refcount struct dso instances, so
that we can ditch unused them when the last map pointing to it goes
away.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-yk1k08etpd2aoe3tnrf0oizn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 10:31:40 -03:00
Arnaldo Carvalho de Melo 9f2de31542 perf machine: Fix up some more method names
Calling the function 'machine__new_module' implies a new 'module' will
be allocated, when in fact what is returned is a 'struct map' instance,
that not necessarily will be instantiated, as if one already exists with
the given module name, it will be returned instead.

So be consistent with other "find and if not there, create" like
functions, like machine__findnew_thread, machine__findnew_dso, etc, and
rename it to machine__findnew_module_map(), that in turn will call
machine__findnew_module_dso().

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-acv830vd3hwww2ih5vjtbmu3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 10:31:34 -03:00
He Kuang 457ae94ae0 perf record: Fix perf.data size in no-buildid mode
The size of perf.data is missing update in no-buildid mode, which gives
wrong output result.

Before this patch:

  $ perf.perf record -B -e syscalls:sys_enter_open uname
  Linux
  [ perf record: Woken up 1 times to  write data ]
  [ perf record: Captured and wrote 0.000 MB perf.data ]

After this patch:

  $ perf.perf record -B -e syscalls:sys_enter_open uname
  Linux
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.001 MB perf.data ]

Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1432819050-30511-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 10:30:32 -03:00
He Kuang 38e096249b tools lib traceevent: Ignore libtrace-dynamic-list file
The libtrace-dynamic-list file is used to export symbols used by
traceevent plugins.

Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1432819735-35040-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 10:30:32 -03:00
He Kuang e3d09ec812 tools lib traceevent: Export dynamic symbols used by traceevent plugins
Traceevent plugins need dynamic symbols exported from libtraceevent.a,
otherwise a dlopen error will occur during plugins loading.

This patch uses dynamic-list-file to export dynamic symbols which will
be used in plugins to perf executable.

The problem is covered up if feature-libpython is enabled, because
PYTHON_EMBED_LDOPTS contains '-Xlinker --export-dynamic' which adds all
symbols to the dynamic symbol table. So we should reproduce the problem
by setting NO_LIBPYTHON=1.

Before this patch:

  (Prepare plugins)
  $ ls /root/.traceevent/plugins/
  plugin_sched_switch.so
  plugin_function.so
  ...

  $ perf record -e 'ftrace:function' ls

  $ perf script
    Warning: could not load plugin '/mnt/data/root/.traceevent/plugins/plugin_sched_switch.so'
    /root/.traceevent/plugins/plugin_sched_switch.so: undefined symbol: pevent_unregister_event_handler

    Warning: could not load plugin '/root/.traceevent/plugins/plugin_function.so'
    /root/.traceevent/plugins/plugin_function.so: undefined symbol: warning
    ...
           :1049  1049 [000]  9666.754487: ftrace:function:  ffffffff8118bc50 <-- ffffffff8118c5b3
           :1049  1049 [000]  9666.754487: ftrace:function:  ffffffff818e2440 <-- ffffffff8118bc75
           :1049  1049 [000]  9666.754487: ftrace:function:  ffffffff8106eee0 <-- ffffffff811212e2

After this patch:

  $ perf record -e 'ftrace:function' ls
  $ perf script
           :1049  1049 [000]  9666.754487: ftrace:function: __set_task_comm
           :1049  1049 [000]  9666.754487: ftrace:function:    _raw_spin_lock
           :1049  1049 [000]  9666.754487: ftrace:function: task_tgid_nr_ns
           ...

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1432819735-35040-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 10:30:31 -03:00
Jiri Olsa f87027b968 perf stat: Move shadow stat counters into separate object
Separating shadow counters code into separate object as a cleanup, but
mainly for upcomming changes, so could use it from script command
context.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 10:30:31 -03:00
Jiri Olsa 7a23f57c89 perf stat: Add aggr_mode argument to print_shadow_stats function
As preparation for moving shadow counters code into its own object.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 10:30:31 -03:00
Jiri Olsa 4d982740cd perf stat: Add output file argument to print_shadow_stats function
As preparation for moving shadow counters code into its own object.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 10:30:31 -03:00
Jiri Olsa 556b1fb7f9 perf stat: Introduce print_shadow_stats function
Move shadow counters display code into separate function as preparation
for moving it into its own object.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 10:30:31 -03:00
Jiri Olsa 1eda3b2144 perf stat: Introduce reset_shadow_stats function
Move shadow counters reset code into separate function
as preparation for moving it into its own object.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 10:30:30 -03:00
Jiri Olsa 3e99e2f5e7 perf stat: Remove transaction_run from shadow update/print code
It's no longer needed, because we use nameid to recognize transaction
events.

Keeping it only in stat code to initialize transaction events.

I.e. struct perf_stat::id, accessible via evsel->priv, will be only set
for transaction related events.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 10:30:30 -03:00
Jiri Olsa a454742c12 perf stat: Remove setup_events function
We can use already existing parse_events interface.

Both transaction_attrs and transaction_limited_attrs are changed to be
single strings.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 10:30:30 -03:00
Jiri Olsa 4c358d5cf3 perf stat: Replace transaction event possition check with id check
Using perf_stat::id to check for transaction events, instead of current
position based way.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 10:30:30 -03:00
Jiri Olsa e2f56da1d6 perf stat: Add id into perf_stat struct
We need fast way to identify evsel as transaction event for shadow
counters computation. Currently we are using possition (in evlist) based
way.

Adding 'id' into 'struct perf_stat' so it can carry transaction event ID
and we can use it for shadow counters computations.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20150604135055.GB23625@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 10:30:30 -03:00
Kan Liang c4937a91ea perf tools: handle PERF_RECORD_LOST_SAMPLES
This patch modifies the perf tool to handle the new RECORD type,
PERF_RECORD_LOST_SAMPLES.

The number of lost-sample events is stored in
.nr_events[PERF_RECORD_LOST_SAMPLES]. The exact number of samples
which the kernel dropped is stored in total_lost_samples.

When the percentage of dropped samples is greater than 5%, a warning
is printed.

Here are some examples:

Eg 1, Recording different frequently-occurring events is safe with the
      patch. Only a very low drop rate is associated with such actions.

$ perf record -e '{cycles:p,instructions:p}' -c 20003 --no-time ~/tchain ~/tchain

$ perf report -D | tail
          SAMPLE events:     120243
           MMAP2 events:          5
    LOST_SAMPLES events:         24
  FINISHED_ROUND events:         15
cycles:p stats:
           TOTAL events:      59348
          SAMPLE events:      59348
instructions:p stats:
           TOTAL events:      60895
          SAMPLE events:      60895

$ perf report --stdio --group
 # To display the perf.data header info, please use --header/--header-only options.
 #
 #
 # Total Lost Samples: 24
 #
 # Samples: 120K of event 'anon group { cycles:p, instructions:p }'
 # Event count (approx.): 24048600000
 #
 #         Overhead  Command      Shared Object     Symbol
 # ................  ...........  ................
 ..................................
 #
    99.74%  99.86%  tchain_edit  tchain_edit       [.] f3
     0.09%   0.02%  tchain_edit  tchain_edit       [.] f2
     0.04%   0.00%  tchain_edit  [kernel.vmlinux]  [k] ixgbe_read_reg

Eg 2, Recording the same thing multiple times can lead to high drop
      rate, but it is not a useful configuration.

$ perf record -e '{cycles:p,cycles:p}' -c 20003 --no-time ~/tchain
Warning: Processed 600592 samples and lost 99.73% samples!
[perf record: Woken up 148 times to write data]
[perf record: Captured and wrote 36.922 MB perf.data (1206322 samples)]
[perf record: Woken up 1 times to write data]
[perf record: Captured and wrote 0.121 MB perf.data (1629 samples)]

Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1431285195-14269-9-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-07 16:09:06 +02:00
Stephane Eranian 5b68164d6a perf record: Add support for sampling indirect jumps
This patch adds a new branch sampling type support for indirect jumps:

  perf record -j ind_jmp .......

It enables analysis of indirect jumps targets. It requires kernel and
possibly hardware support to operate correctly.

Signed-off-by: Stephane Eranian <eranian@google.com>
[ Fixup against: f00898f4e2 (perf tools: Move branch option parsing to own file) ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@redhat.com
Cc: dsahern@gmail.com
Cc: jolsa@redhat.com
Cc: kan.liang@intel.com
Cc: namhyung@kernel.org
Link: http://lkml.kernel.org/r/1431637800-31061-4-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-07 16:08:31 +02:00
Borislav Petkov b72e7464e4 x86/uapi: Do not export <asm/msr-index.h> as part of the user API headers
This header containing all MSRs and respective bit definitions
got exported to userspace in conjunction with the big UAPI
shuffle.

But, it doesn't belong in the UAPI headers because userspace can
do its own MSR defines and exporting them from the kernel blocks
us from doing cleanups/renames in that header. Which is
ridiculous - it is not kernel's job to export such a header and
keep MSRs list and their names stable.

Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1433436928-31903-19-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-07 15:36:04 +02:00
Anshuman Khandual 809fac67c8 selftests/powerpc: Add gitignore file for the new DSCR tests
This patch adds .gitignore for all the newly added DSCR tests.

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07 19:38:20 +10:00
Michael Ellerman af0be08ee6 selftests/powerpc: Add thread based stress test for DSCR sysfs interfaces
This patch adds a test to update the system wide DSCR value repeatedly
and then verifies that any thread on any given CPU on the system must be
able to see the same DSCR value whether its is being read through the
problem state based SPR or the privilege state based SPR.

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07 19:38:18 +10:00
Anshuman Khandual ebd5858c90 selftests/powerpc: Add test for all DSCR sysfs interfaces
This test continuously updates the system wide DSCR default value in the
sysfs interface and makes sure that the same is reflected across all the
sysfs interfaces for each individual CPUs present on the system.

Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07 19:37:58 +10:00
Anshuman Khandual 6f844261e1 selftests/powerpc: Add test for DSCR inheritence across fork & exec
This patch adds a test case to verify that the changed DSCR value inside
any process would be inherited to it's child across the fork and exec
system call.

Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07 19:37:31 +10:00
Anshuman Khandual cf9c4a5ecf selftests/powerpc: Add test for DSCR value inheritence across fork
This patch adds a test to verify that the changed DSCR value inside any
process would be inherited to it's child process across the fork system
call.

Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07 19:37:11 +10:00
Anshuman Khandual cc6a93f1c3 selftests/powerpc: Add test for DSCR SPR numbers
This patch adds a test which verifies that the DSCR privilege and
problem state SPR read & write accesses while making sure that the
results are always the same irrespective of which SPR number is being
used.

Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07 19:36:51 +10:00
Anshuman Khandual 1554f21a98 selftests/powerpc: Add test for explicitly changing DSCR value
This patch adds a test which modifies the DSCR using mtspr instruction
and verifies the change using mfspr instruction. It uses both the
privilege state SPR as well as the problem state SPR for the purpose.

Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07 19:36:08 +10:00
Anshuman Khandual 4c6315f8f9 selftests/powerpc: Add test for system wide DSCR default
This patch adds a test case for the system wide DSCR default value,
which when changed through it's sysfs interface must be visible to all
threads reading DSCR either through the privilege state SPR or the
problem state SPR. The DSCR value change should be immediate as well.

Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07 19:35:38 +10:00
Linus Torvalds 51d0f0cb3a Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
 "Misc fixes:

   - early_idt_handlers[] fix that fixes the build with bleeding edge
     tooling

   - build warning fix on GCC 5.1

   - vm86 fix plus self-test to make it harder to break it again"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asm/irq: Stop relying on magic JMP behavior for early_idt_handlers
  x86/asm/entry/32, selftests: Add a selftest for kernel entries from VM86 mode
  x86/boot: Add CONFIG_PARAVIRT_SPINLOCKS quirk to arch/x86/boot/compressed/misc.h
  x86/asm/entry/32: Really make user_mode() work correctly for VM86 mode
2015-06-05 10:03:48 -07:00
Wang Nan 1f121b03d0 perf tools: Deal with kernel module names in '[]' correctly
Before patch ba92732e98 ('perf kmaps: Check kmaps to make code more
robust'), 'perf report' and 'perf annotate' will segfault if trace data
contains kernel module information like this:

 # perf report -D -i ./perf.data
 ...
 0 0 0x188 [0x50]: PERF_RECORD_MMAP -1/0: [0xffffffbff1018000(0xf068000) @ 0]: x [test_module]
 ...

 # perf report -i ./perf.data --objdump=/path/to/objdump --kallsyms=/path/to/kallsyms

 perf: Segmentation fault
 -------- backtrace --------
 /path/to/perf[0x503478]
 /lib64/libc.so.6(+0x3545f)[0x7fb201f3745f]
 /path/to/perf[0x499b56]
 /path/to/perf(dso__load_kallsyms+0x13c)[0x49b56c]
 /path/to/perf(dso__load+0x72e)[0x49c21e]
 /path/to/perf(map__load+0x6e)[0x4ae9ee]
 /path/to/perf(thread__find_addr_map+0x24c)[0x47deec]
 /path/to/perf(perf_event__preprocess_sample+0x88)[0x47e238]
 /path/to/perf[0x43ad02]
 /path/to/perf[0x4b55bc]
 /path/to/perf(ordered_events__flush+0xca)[0x4b57ea]
 /path/to/perf[0x4b1a01]
 /path/to/perf(perf_session__process_events+0x3be)[0x4b428e]
 /path/to/perf(cmd_report+0xf11)[0x43bfc1]
 /path/to/perf[0x474702]
 /path/to/perf(main+0x5f5)[0x42de95]
 /lib64/libc.so.6(__libc_start_main+0xf4)[0x7fb201f23bd4]
 /path/to/perf[0x42dfc4]

This is because __kmod_path__parse treats '[' leading names as kernel
name instead of names of kernel module.

If perf.data contains build information and the buildid of such modules
can be found, the dso->kernel of it will be set to DSO_TYPE_KERNEL by
__event_process_build_id(), not kernel module.

It will then be passed to dso__load() -> dso__load_kernel_sym() ->
dso__load_kcore() if --kallsyms is provided.

The refered patch adds NULL pointer checker to avoid segfault. However,
such kernel modules are still processed incorrectly.

This patch fixes __kmod_path__parse, makes it treat names like
'[test_module]' as kernel modules.

kmod-path.c is also update to reflect the above changes.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1433321541-170245-1-git-send-email-wangnan0@huawei.com
[ Fixed the merged with 0443f36b0d ("perf machine: Fix the search
  for the kernel DSO on the unified list" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-03 10:02:38 -03:00
Ingo Molnar 34e7724c07 Merge branches 'x86/mm', 'x86/build', 'x86/apic' and 'x86/platform' into x86/core, to apply dependent patch
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-03 10:05:18 +02:00
Wang Nan 4fc62a89dc tools: Move tools/perf/util/include/linux/{list.h,poison.h} to tools/include
This patch moves list.h from tools/perf/util/include/linux/list.h to
tools/include/linux/list.h to enable other libraries use macros in it,
like libbpf which will be introduced by further patches. Since list.h
depend on poison.h, poison.h is also moved.

Both file use relative path, so one '..' is removed for each header to
make them suit for new directory.

MANIFEST is also updated for 'make perf-*-src-pkg'.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1433144296-74992-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-02 19:07:29 -03:00
Wang Nan 37fbe0a4a0 perf tools: Move linux/kernel.h to tools/include
This patch moves kernel.h from tools/perf/util/include/linux/kernel.h
to tools/include/linux/kernel.h to enable other libraries use macros in
it, like libbpf which will be introduced by further patches.

MANIFEST is also updated for 'make perf-*-src-pkg'.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1433144296-74992-2-git-send-email-wangnan0@huawei.com
[ Fixed up the ifdef guard to match other entries in tools/include/linux ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-02 15:27:04 -03:00
Arnaldo Carvalho de Melo 0443f36b0d perf machine: Fix the search for the kernel DSO on the unified list
When unifying the user_dsos and kernel_dsos a bug was introduced by
inverting the check for dso->kernel, fix it.

Fixes: 3d39ac5386 ("perf machine: No need to have two DSOs lists")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-xnrnq0kams3s2z9ek1wjb506@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-02 15:15:37 -03:00
Michael Ellerman 989898b707 selftests/powerpc: Add install support to more powerpc tests
These tests were merged in parallel to the install support, update them
now to use it.

This also adds cross compile support for the VPHN test which was missing
it.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-02 16:54:49 +10:00
Ingo Molnar 085c789783 Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU changes from Paul E. McKenney:

  - Initialization/Kconfig updates: hide most Kconfig options from unsuspecting users.
    There's now a single high level configuration option:

      *
      * RCU Subsystem
      *
      Make expert-level adjustments to RCU configuration (RCU_EXPERT) [N/y/?] (NEW)

    Which if answered in the negative, leaves us with a single interactive
    configuration option:

      Offload RCU callback processing from boot-selected CPUs (RCU_NOCB_CPU) [N/y/?] (NEW)

    All the rest of the RCU options are configured automatically.

  - Remove all uses of RCU-protected array indexes: replace the
    rcu_[access|dereference]_index_check() APIs with READ_ONCE() and rcu_lockdep_assert().

  - RCU CPU-hotplug cleanups.

  - Updates to Tiny RCU: a race fix and further code shrinkage.

  - RCU torture-testing updates: fixes, speedups, cleanups and
    documentation updates.

  - Miscellaneous fixes.

  - Documentation updates.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-02 08:18:34 +02:00
David S. Miller dda922c831 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/phy/amd-xgbe-phy.c
	drivers/net/wireless/iwlwifi/Kconfig
	include/net/mac80211.h

iwlwifi/Kconfig and mac80211.h were both trivial overlapping
changes.

The drivers/net/phy/amd-xgbe-phy.c file got removed in 'net-next' and
the bug fix that happened on the 'net' side is already integrated
into the rest of the amd-xgbe driver.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-01 22:51:30 -07:00
Madhavan Srinivasan 9ecae065f3 perf tools: Remove newline char when reading event scale and unit
The <fd979c013207> commit intruduced the perf_event_sysfs_show function
to display the event_str value of an attr in kernel/event/core.c. But
the function returns the value with a newline char.

So, if a event also carries a event.unit file, when printing the counter
data perf tool formatting goes for a spin.

That is, because of the event unit, event name is printed in the newline
because of perf_event_sysfs_show returns with a newline char.

Now fixing perf core will break API, hencing proposing a fix in the perf tool.

Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1433052383-21802-1-git-send-email-maddy@linux.vnet.ibm.com
[ Add spaces around operators ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-01 10:26:19 -03:00
Hartmut Knaack 9d4752544d tools:iio:iio_utils: pass strings as const
Mark strings, which are not supposed to be changed (basedir, filename,
value), as const in function parameters.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-06-01 08:40:26 +01:00
Hartmut Knaack e06e3d7112 tools:iio: rework program parameters
In generic_buffer.c: sort program parameters alphabetically and provide
		     usage information
In lsiio.c: drop unused parameters

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-06-01 08:38:40 +01:00
Hartmut Knaack 1e7c34788d tools:iio:iio_utils: initialize count during declaration
In build_channel_array(), count can be initialized already during variable
declaration.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-06-01 08:37:54 +01:00
Hartmut Knaack ace76e42bc tools:iio:iio_utils: move up reset of sysfsfp
In iioutils_get_type() it is logically better fitting to have sysfsfp
assigned zero right after closing it.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-06-01 08:37:09 +01:00
Hartmut Knaack 33ebcb21a6 tools:iio:iio_utils: refactor assignment of is_signed
Change the assignment of *is_signed in iioutils_get_type() to a one-liner,
as already done with *be.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-06-01 08:35:29 +01:00
Hartmut Knaack 916e89e4b7 tools:iio:iio_event_monitor: refactor events output
Refactor the code in print_event() to reduce code duplication and better
reflect that the type is output unconditionally, as well as cascade the
dependency of the diff-channel. Saves a few lines of code, as well.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-06-01 08:34:48 +01:00
Hartmut Knaack 0e79987817 tools:iio: return values directly
Return directly, if no common cleanup is required.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-06-01 08:33:47 +01:00
Hartmut Knaack 5dc65d791d tools:iio:iio_utils: add missing documentation
Fully document public functions and elements.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-06-01 08:33:17 +01:00
Hartmut Knaack acf50b3586 tools:iio:lsiio: add error handling
Add error handling to calls which can indicate a major problem by
returning an error code.
This also involves to change the type of dump_devices() from void to int.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 19:45:00 +01:00
Hartmut Knaack 53118557b6 tools:iio:iio_utils: add error handling
Add error handling to calls which can indicate a major problem by
returning an error code.
This also sets ret to -ENOENT in iioutils_get_type() and
iioutils_get_param_float() to indicate if no matching directory entry was
found.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 19:43:50 +01:00
Linus Torvalds 50f5a1ee32 Merge branch 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat tool fixes from Len Brown:
 "Just one minor kernel dependency in this batch -- added a #define to
  msr-index.h"

* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: update version number to 4.7
  tools/power turbostat: allow running without cpu0
  tools/power turbostat: correctly decode of ENERGY_PERFORMANCE_BIAS
  tools/power turbostat: enable turbostat to support Knights Landing (KNL)
  tools/power turbostat: correctly display more than 2 threads/core
2015-05-31 11:39:25 -07:00
Hartmut Knaack 963f54cef2 tools:iio:iio_event_monitor: add error handling
Add error handling to calls which can indicate a major problem by
returning an error code.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 19:25:12 +01:00
Hartmut Knaack 6bb7cac855 tools:iio:generic_buffer: add error handling
Add error handling to calls which can indicate a major problem by
returning an error code.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 19:24:18 +01:00
Hartmut Knaack c8ce9903cb tools:iio:generic_buffer: catch errors for arguments conversion
Add handler to catch errors on conversion of numerical arguments.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 19:22:57 +01:00
Hartmut Knaack e9e45b43b8 tools:iio: catch errors in string allocation
This patch catches errors in string allocation in generic_buffer.c,
iio_event_monitor.c, iio_utils.c and lsiio.c.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 19:21:10 +01:00
Hartmut Knaack 2156b17999 tools:iio:iio_utils: mark private function static
Functions _write_sysfs_int() and _write_sysfs_string() are supposed to
be called only by public wrappers, so make them static.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 19:19:35 +01:00
Hartmut Knaack 096f9b862e tools:iio:iio_utils: implement digit calculation
Previously, the return value of sscanf() was treated as an indication of
the digits it would have read. Yet, sscanf() only returns the amount of
valid matches.
Therefore, introduce a function to calculate the decimal digits of the
read number and use this one to commence a colon search, as originally
intended.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 19:18:55 +01:00
Hartmut Knaack dc8b5d6e63 tools:iio:iio_utils: check amount of matches
fscanf() usually returns the number of input items successfully matched
and assigned, which can be fewer than provided (or even zero).
Add a check in iioutils_get_type() to make sure all items are matched.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 17:42:34 +01:00
Hartmut Knaack 8e926134ef tools:iio:generic_buffer: sign-extend and shift data
Refactor process_scan() to handle signed and unsigned data, respect shifts
and the data mask for 2, 4 and 8 byte sized scan elements.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 17:42:32 +01:00
Hartmut Knaack e83a47cf6a tools:iio:generic_buffer: pass up right error code
find_type_by_name() returns a valid error code in case of an error. Pass
this code up instead of an artificial one.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 17:36:12 +01:00
Hartmut Knaack 8749948a1b tools:iio:generic_buffer: fix check of errno
Since errno contains the value of any of the defined error names, a
negation will not lead to the desired match.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 17:35:04 +01:00
Hartmut Knaack 5fdb8c6127 tools:iio:iio_event_monitor: save right errno
Move up error handling code to preserve the errno coming from ioctl(),
before it may be changed by close().

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 17:34:05 +01:00
Hartmut Knaack 2b6a6e67af tools:iio: save errno first
The man-page of errno states, that errno should be saved before doing any
library call, as that call may have changed the value of errno. So, when
encountering any error, save errno first.
This patch affects generic_buffer.c, iio_event_monitor.c and iio_utils.c.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 17:32:44 +01:00
Hartmut Knaack f96d055e4b tools:iio:lsiio: add closedir before exit
In dump_channels() the DIR *dp was left open on exit. Close it and check
for errors.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 17:30:29 +01:00
Hartmut Knaack 121b5e505f tools:iio:iio_utils: fix allocation handling
In build_channel_array(), count needs to be decreased in more places since
current->name and current->generic_name would be freed on the error path,
although they have not been allocated, yet.
This also requires to free current->name, when it is allocated, but
current->generic_name is not yet allocated.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 17:22:56 +01:00
Hartmut Knaack 63f05c855f tools:iio: free channel-array completely
In iio_utils.c build_channel_array() dynamically allocates the string
generic_name in the current iio_channel_info, which doesn't got freed in
case of an error.
This dynamically allocated channel-array is used by generic_buffer, and
needs to be freed on the error/exit path.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 17:20:16 +01:00
Hartmut Knaack 66dd08fde0 tools:iio:iio_utils: free scan_el_dir on exit
In the error path, the string scan_el_dir got freed, while it was missing when
build_channel_array() finished without errors.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 17:19:12 +01:00
Hartmut Knaack d3ccfc41f9 tools:iio:generic_buffer: free dev_dir_name on exit
Make sure to free dev_dir_name in case of an error or regular exit.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 17:14:37 +01:00
Hartmut Knaack a71bfb4a6a tools:iio:generic_buffer: fix order of freeing data
data gets allocated before buffer_access, so it should be freed in reverse
order. Otherwise, if allocating buffer_access fails, an attempt to free it
would be taken, which should not happen.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 17:12:51 +01:00
Wang Nan 6bb536cc4b perf probe: Fix segfault when glob matching function without debuginfo
Commit 4c85935122 ("perf probe: Support
glob wildcards for function name") introduces segfault problems when
debuginfo is not available:

 # perf probe 'sys_w*'
  Added new events:
  Segmentation fault

The first problem resides in find_probe_trace_events_from_map(). In
that function, find_probe_functions() is called to match each symbol
against glob to find the number of matching functions, but still use
map__for_each_symbol_by_name() to find 'struct symbol' for matching
functions. Unfortunately, map__for_each_symbol_by_name() does
exact matching by searching in an rbtree.

It doesn't know glob matching, and not easy for it to support it because
it use rbtree based binary search, but we are unable to ensure all names
matched by the glob (any glob passed by user) reside in one subtree.

This patch drops map__for_each_symbol_by_name(). Since there is no
rbtree again, re-matching all symbols costs a lot. This patch avoid it
by saving all matching results into an array (syms).

The second problem is the lost of tp->realname. In
__add_probe_trace_events(), if pev->point.function is glob, the event
name should be set to tev->point.realname. This patch ensures its
existence by strdup sym->name instead of leaving a NULL pointer there.

After this patch:

 # perf probe 'sys_w*'
 Added new events:
   probe:sys_waitid     (on sys_w*)
   probe:sys_wait4      (on sys_w*)
   probe:sys_waitpid    (on sys_w*)
   probe:sys_write      (on sys_w*)
   probe:sys_writev     (on sys_w*)

 You can now use it in all perf tools, such as:

         perf record -e probe:sys_writev -aR sleep 1

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1432892747-232506-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-30 11:08:52 -03:00
Andy Lutomirski c2affbf9a5 x86/asm/entry/32, selftests: Add a selftest for kernel entries from VM86 mode
Test a couple of special cases in 32-bit kernels for entries
from vm86 mode.  This will OOPS both old kernels due to a bug
and and 4.1-rc5 due to a regression I introduced, and it should
make sure that the SYSENTER-from-vm86-mode hack in the kernel
keeps working.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/09a9916761e0a9e42d4922f147af45a0079cc1e8.1432936374.git.luto@kernel.org
Tests: 394838c960 x86/asm/entry/32: Fix user_mode() misuses
Tests: 7ba554b5ac x86/asm/entry/32: Really make user_mode() work correctly for VM86 mode
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-30 10:21:32 +02:00
Herton R. Krzesinski 47b98c74fa cpupower: mperf monitor: fix output in MAX_FREQ_SYSFS mode
There is clearly wrong output when mperf monitor runs in MAX_FREQ_SYSFS mode:
average frequency shows in kHz unit (despite the intended output to be in MHz),
and percentages for C state information are all wrong (including high/negative
values shown).

The problem is that the max_frequency read on initialization isn't used where it
should have been used on mperf_get_count_percent (to estimate the number of
ticks in the given time period), and the value we read from sysfs is in kHz, so
we must divide it to get the MHz value to use in current calculations.

While at it, also I fixed another small issues in the debug output of
max_frequency value in mperf_get_count_freq.

Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-30 02:21:31 +02:00
Namhyung Kim ed42691590 perf tools: Make Ctrl-C stop processing on TUI
It was inconvenient that perf cannot be quit with SIGINT during
processing samples on TUI especially for large data files.

This was because the first argument of SLang_init_tty(), abort_char,
being 0.  The manual says it's the ascii value of the control character
that will be used to generate the interrupt signal [1].  Passing -1
means to use the default value (Ctrl-C).

However, after processing samples, Ctrl-C was used to in other cases as
well - like stepping back from annotate.  So recover the original
behavior after processing.

[1] http://jedsoft.org/slang/doc/html/cslang-6.html#ss6.1

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1432904024-13170-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-29 12:49:00 -03:00
Jiri Olsa d7a3d85e08 perf build: Do not fail on missing Build file
Allow nesting into directories without Build file. Currently we force
include of the Build file, which fails the build when the Build file is
missing.

We already support empty *-in.o' objects if there's nothing in the
directory to be compiled, so we can just use it for missing Build file
cases.

Also adding this case under tests.

Reported-by: Rabin Vincent <rabin.vincent@axis.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabin.vincent@axis.com>
Link: http://lkml.kernel.org/r/1432914178-24086-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-29 12:44:25 -03:00
Arnaldo Carvalho de Melo 9a4388c711 perf machine: Fix up vdso methods names
To make it consistent with the other dso lifetime routines.

For instance:

 struct dso *vdso__new(struct machine *machine, const char *short_name,
		        const char *long_name)

Becomes:

 struct dso *machine__addnew_vdso(struct machine *machine, const
				  char *short_name, const char *long_name)

Because:

1) There is no 'struct vdso' for us to have vdso__ prefixed routines.

2) Because it will not really just create a new instance of 'struct
   dso', it'll call dso__new() but it will also insert it into the
   DSO's list/rbtree, and we have a method name for that: 'addnew',
   just like we have dsos__addnew().

3) So it is really a 'struct machine' operation, it is the first
   argument, etc.

This way the place where this is used gets consistent:

                if (vdso) {
                        pgoff = 0;
-                       dso = vdso__dso_findnew(machine, thread);
+                       dso = machine__findnew_vdso(machine, thread);
                } else
                        dso = machine__findnew_dso(machine, filename);

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-r3w3tvh8exm9xfz3p4tz9qbz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-29 12:43:44 -03:00
Arnaldo Carvalho de Melo aa7cc2ae5a perf machine: Introduce machine__findnew_dso() method
Similar to machine__findnew_thread(), also prepping for refcounting and
locking, this time for struct dso instances.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-fv3tshv5o1413coh147lszjc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-29 12:43:44 -03:00
Arnaldo Carvalho de Melo 3d39ac5386 perf machine: No need to have two DSOs lists
We can, given a DSO, figure out if it is a kernel, a kernel module or
a userlevel DSO, so stop having to process two lists in several
functions.

If searching becomes an issue at some point, we can have them in a
rbtree, etc.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-s4yb0onpdywu6dj2xl9lxi4t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-29 12:43:43 -03:00
Arnaldo Carvalho de Melo 459ce518d9 perf machine: Adopt findnew_kernel method
It never was a 'struct dso' method, so fix that by rename
dso__kernel_findnew() to machine__findnew_kernel().

At some point I'll move it all to the machine.[ch] files, for now
lets ease patch review by not moving too much stuff.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zrxmblgsg5vx0iv4rhvq2f6l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-29 12:43:43 -03:00
Riku Voipio cec8393870 perf tests: Remove getpgrp from mmap-basic
mmap-basic fails on arm64.

 4: read samples using the mmap interface: read samples using the mmap interface: FAILED!

This is because arm64 doesn't come with getpgrp() syscall. The syscall
is a BSD compatibility wrapper, Archs that don't define
__ARCH_WANT_SYS_GETPGRP do not have this. Remove it, since getpgid is
already used in the testcase.

Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429192375-13706-4-git-send-email-riku.voipio@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-29 12:43:42 -03:00
Riku Voipio fbb2df231e perf tests: Aename open*.c to openat*.c
Since the test being tested is now openat rather than open, rename the
files to make it explicit. The patch is separeted from the first to make
it simpler to deal with any potential conflicts in the Makefile

Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429192375-13706-3-git-send-email-riku.voipio@linaro.org
[ Fixed it up wrt Build files ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-29 12:43:41 -03:00
Riku Voipio 43f322b4ab perf tests: Switch from open to openat
Multiple perf tests fail on arm64 due to missing open syscall:

 2: detect open syscall event                              : FAILED!

open(2) is a legacy syscall, replaced with openat(2) since 2.6.16.  Thus
new architectures in kernel, such as arm64, don't implement these legacy
syscalls.

The patch replaces all sys_enter_open events with sys_enter_openat,
renames the related tests and test output to avoid confusion.

Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429192375-13706-2-git-send-email-riku.voipio@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-29 12:43:41 -03:00
Wang Nan 3237f28188 perf tools: Add ARM64 perf_regs_load to support libunwind and enable testing
Newest libunwind does support ARM64, and perf is able to utilize it
also.

This patch enables the perf test dwarf unwind for arm64.

 Test result:
  # ./perf test unwind
  25: Test dwarf unwind                                      : Ok

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1427461681-72971-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-29 12:43:40 -03:00
Arnaldo Carvalho de Melo b236512280 perf kmem: Fix compiler warning about may be accessing uninitialized variable
The last argument to strtok_r doesn't need to be initialized, its just a
placeholder to make this routine reentrant, but gcc doesn't know about
that and complains, breaking the build, fix it by setting it to NULL.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-8e8rgbg3aom9uarsyqjrsctg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-29 12:43:40 -03:00
Adrian Hunter 427cde3287 perf db-export: Fix thread ref-counting
Thread ref-counting was not done for get_main_thread() meaning that
there was a thread__get() from machine__find_thread() that was not being
paired with thread__put(). Fix that.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1432906425-9911-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-29 12:43:39 -03:00
Wang Nan 60fb774292 perf probe: Fix 'function unused' warning
By 'make build-test' a warning is found in probe-event.c that, after
commit 419e873828 (perf probe: Show the error reason comes from
invalid DSO) the only user of kernel_get_module_dso() is
open_debuginfo(). Which is not compiled if HAVE_DWARF_SUPPORT not set.

'make build-test' found this problem when make_minimal.

This patch moves kernel_get_module_dso() to HAVE_DWARF_SUPPORT ifdef
section.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1432779905-206143-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-29 12:43:39 -03:00
Martin Liška 44848cdbbd perf annotate: Fix -i option, which is currently ignored.
Assign input_name, received from program arguments, to file data
structure.

Signed-off-by: Martin Liska <mliska@suse.cz>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/55685654.2010209@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-29 12:43:34 -03:00
Andi Kleen f00898f4e2 perf tools: Move branch option parsing to own file
.. to allow sharing between builtin-record and builtin-top later.  No
code changes, just moved code.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1432749114-904-9-git-send-email-andi@firstfloor.org
[ Rename too generic branch.[ch] name to parse-branch-options.[ch] ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-27 21:02:17 -03:00
Andi Kleen 83be34a7a9 perf annotation: Add symbol__get_annotation
Add a new utility function to get an function annotation out of existing
code.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1432749114-904-4-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-27 20:30:56 -03:00
Jiri Olsa 18ffdfe8e9 perf tools: Add hint for 'Too many events are opened.' error message
Enhancing the 'Too many events are opened.' error message with hint to
use use 'ulimit -n <limit>' command.

Before:

  $ perf record -e 'sched:*,syscalls:*' ls
  Error:
  Too many events are opened.
  Try again after reducing the number of events.

Now:

  $ perf record -e 'sched:*,syscalls:*' ls
  Error:
  Too many events are opened.
  Probably the maximum number of open file descriptors has been reached.
  Hint: Try again after reducing the number of events.
  Hint: Try increasing the limit with 'ulimit -n <limit>'

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1432587114-14924-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-27 20:28:37 -03:00
Arnaldo Carvalho de Melo 84c2cafa28 perf tools: Reference count struct map
We have pointers to struct map instances in several places, like in the
hist_entry instances, so we need a way to know when we can destroy them,
otherwise we may either keep leaking them or end up referencing deleted
instances.

Start fixing it by reference counting them.

This patch puts the reference count for struct map in place, replacing
direct map__delete() calls with map__put() ones and then grabbing a
reference count when adding it to the maps struct where maps for a
struct thread are kept.

Next we'll grab reference counts when setting pointers to struct map
instances, in places like in the hist_entry code.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wi19xczk0t2a41r1i2chuio5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-27 20:27:30 -03:00
Arnaldo Carvalho de Melo facf3f0621 perf tools: Check if a map is still in use when deleting it
I.e. match RB_CLEAR_NODE() with RB_EMPTY_NODE(), to check that it isn't
in a rb tree at the time of its deletion.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vumvhird765id11zbx00d2r8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-27 20:27:16 -03:00
Arnaldo Carvalho de Melo 6a2ffcddad perf tools: Protect accesses the map rbtrees with a rw lock
To allow concurrent access, next step: refcount struct map instances, so
that we can ditch maps->removed_maps and stop leaking threads, maps,
then struct DSO needs the same treatment.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-o45w2w5dzrza38nzqxnqzhyf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-27 20:25:16 -03:00
Arnaldo Carvalho de Melo 1eee78aea9 perf tools: Introduce struct maps
That for now has the maps rbtree and the list for the dead maps, that
may be still referenced from some hist_entry, etc.

This paves the way for protecting the rbtree with a lock, then refcount
the maps and finally remove the removed_maps list, as it'll not ne
anymore needed.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-fl0fa6142pj8khj97fow3uw0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-27 20:21:41 -03:00
Len Brown a68c7c3ff0 tools/power turbostat: update version number to 4.7
Signed-off-by: Len Brown <len.brown@intel.com>
2015-05-27 18:04:01 -04:00
Prarit Bhargava 7ce7d5de6d tools/power turbostat: allow running without cpu0
Linux-3.7 added CONFIG_BOOTPARAM_HOTPLUG_CPU0,
allowing systems to offline cpu0.

But when cpu0 is offline, turbostat will not run:

 # turbostat ls
turbostat: no /dev/cpu/0/msr

This patch replaces the hard-coded use of cpu0 in turbostat
with the current cpu, allowing it to run without a cpu0.

Fewer cross-calls may also be needed due to use of current cpu,
though this hard-coding was used only for the --debug preamble.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2015-05-27 18:04:01 -04:00
Len Brown e9be7dd628 tools/power turbostat: correctly decode of ENERGY_PERFORMANCE_BIAS
When EPB is 0xF, turbosat was incorrectly describing it as "custom"
instead of calling it "powersave":

< cpu0: MSR_IA32_ENERGY_PERF_BIAS: 0x0000000f (custom)
> cpu0: MSR_IA32_ENERGY_PERF_BIAS: 0x0000000f (powersave)

Signed-off-by: Len Brown <len.brown@intel.com>
2015-05-27 18:04:00 -04:00
Dasaratharaman Chandramouli fb5d432722 tools/power turbostat: enable turbostat to support Knights Landing (KNL)
Changes mainly to account for minor differences in Knights Landing(KNL):
1. KNL supports C1 and C6 core states.
2. KNL supports PC2, PC3 and PC6 package states.
3. KNL has a different encoding of the TURBO_RATIO_LIMIT MSR

Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2015-05-27 18:03:57 -04:00
Dasaratharaman Chandramouli e275b3885d tools/power turbostat: correctly display more than 2 threads/core
Without this update, turbostat displays only 2 threads per core.
Some processors, such as Xeon Phi, have more.

Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2015-05-27 17:26:42 -04:00
Paul E. McKenney 0868aa2216 Merge branches 'array.2015.05.27a', 'doc.2015.05.27a', 'fixes.2015.05.27a', 'hotplug.2015.05.27a', 'init.2015.05.27a', 'tiny.2015.05.27a' and 'torture.2015.05.27a' into HEAD
array.2015.05.27a:  Remove all uses of RCU-protected array indexes.
doc.2015.05.27a:  Docuemntation updates.
fixes.2015.05.27a:  Miscellaneous fixes.
hotplug.2015.05.27a:  CPU-hotplug updates.
init.2015.05.27a:  Initialization/Kconfig updates.
tiny.2015.05.27a:  Updates to Tiny RCU.
torture.2015.05.27a:  Torture-testing updates.
2015-05-27 13:00:49 -07:00
Paul E. McKenney 7d3bb54ade rcutorture: Allow repetition factors in Kconfig-fragment lists
Although it is currently possible to run the same test in parallel,
'--config "TINY01 TINY01 TINY01"' can get a bit verbose, especially
if you want to run 48 instances of TINY01 in parallel.  This commit
therefore allows prefixing the Kconfig fragment with a repeat count,
for example, '--config "48*TINY01"' to run 48 instances in parallel.
At least assuming that you have 48 CPUs and also gave '--cpus 48'.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2015-05-27 13:00:00 -07:00
Paul E. McKenney 8ba8b664d4 rcutorture: Display "make oldconfig" errors
The current rcutorture scripting fails to dump out errors from
"make oldconfig", so this commit addresses this issue.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2015-05-27 13:00:00 -07:00
Paul E. McKenney ccd60ad3f8 rcutorture: Update TREE_RCU-kconfig.txt
This commit updates TREE_RCU-kconfig.txt to reflect changes in RCU's
Kconfig setup.  This commit also updates rcutorture's Kconfig fragments
to account for Kconfig parameters that are now driven directly off of
other Kconfig parameters.

The #CHECK# prefix tells the rcutorture scripts to take no action to try
to set the Kconfig parameter, but to check that it does in fact get set.
This is useful for verifying that Kconfig parameters that are supposed
to be automatically set do in fact get set to the required values.

Reported-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2015-05-27 13:00:00 -07:00
Paul E. McKenney c4295bfe7e rcutorture: Make rcutorture scripts force RCU_EXPERT
This commit causes the rcutorture scripts to force RCU_EXPERT so that
these scripts can cause rcutorture to torture RCU in the various required
configurations.  However, SRCU-P, TASKS03, and TREE09 retain !RCU_EXPERT
in order to ensure testing of the vanilla configuration.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2015-05-27 12:59:59 -07:00
Paul E. McKenney c5e8e98cd1 rcutorture: Update configuration fragments for rcutree.rcu_fanout_exact
This commit updates rcutortures configuration-fragment files to account
for the move from the CONFIG_RCU_FANOUT_EXACT Kconfig parameter to the
new rcutree.rcu_fanout_exact= boot parameter.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2015-05-27 12:59:59 -07:00
Paul E. McKenney 9a8e7062f6 rcutorture: TASKS_RCU set directly, so don't explicitly set it
The TASKS01, TASKS02, and TASKS03 rcutorture config fragments currently
set CONFIG_TASKS_RCU.  However, now that the value of this Kconfig
parameter is set via "select" statements, it is no longer necessary to
set it explicitly.  This commit therefore removes it from the Kconfig
fragments.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2015-05-27 12:59:59 -07:00
Paul E. McKenney ca1d51ed98 rcutorture: Test SRCU cleanup code path
The current rcutorture testing does not do any cleanup operations.
This works because the srcu_struct is statically allocated, but it
does represent a memory leak of the associated dynamically allocated
->per_cpu_ref per-CPU variables.  However, rcutorture currently uses
a statically allocated srcu_struct, which cannot legally be passed to
cleanup_srcu_struct().  Therefore, this commit adds a second form
of srcu (called srcud) that dynamically allocates and frees the
associated per-CPU variables.  This commit also adds a ->cleanup()
member to rcu_torture_ops that is invoked at the end of the test,
after ->cb_barriers().  This ->cleanup() pointer is NULL for all
existing tests, and thus only used for scrud.  Finally, the SRCU-P
torture-test configuration selects scrud instead of srcu, with SRCU-N
continuing to use srcu, thereby testing both static and dynamic
srcu_struct structures.

Reported-by: "Ahmed, Iftekhar" <ahmedi@onid.oregonstate.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2015-05-27 12:59:58 -07:00
Paul E. McKenney 6530b3f4c5 rcutorture: Exchange TREE03 and TREE08 NR_CPUS, speed up CPU hotplug
TREE03 has been especially effective at finding bugs lately.  This commit
makes it even more effective by speeding up its CPU hotplug testing and
increasing its NR_CPUs from 8 to 16.  TREE08's NR_CPUS is decreased from
16 to 8 in order to maintain the same test duration.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2015-05-27 12:59:57 -07:00
Paul E. McKenney f76b244e47 rcutorture: Exchange TREE03 and TREE04 geometries
Given that the combination of PREEMPT_RCU and HOTPLUG_CPU is producing the
most bugs lately, this commit swaps the TREE03 and TREE04 rcu_node-tree
geometries so that the test exercising PREEMPT_RCU and HOTPLUG_CPU has
three-level rather than two-level rcu_node trees.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2015-05-27 12:59:56 -07:00
Paul E. McKenney f13bad9042 rcutorture: Test both RCU-sched and RCU-bh for Tiny RCU
Tiny RCU supports both RCU-sched and RCU-bh, but only RCU-sched is
currently tested by the rcutorture scripts.  This commit therefore
changes the TINY02 configuration to test RCU-bh, with TINY01 continuing
to test RCU-sched.

This shortcoming of the current rcutorture tests was located by mutation
testing by Iftekhar.  The idea behind mutation testing is to automatically
mutate the code under test.  If a given mutant is not caught by testing,
this is a hint that the testing might need to be improved, as was the
case here.  Note that this is only a hint because it is possible to mutate
the code into something else that still works.  For example, a mutation
that removes (say) a WARN_ON() will not normally result in a test failure.

This change resulted in the test failure caused by list mishandling,
which is fixed by the next commit.

Reported-by: "Ahmed, Iftekhar" <ahmedi@onid.oregonstate.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2015-05-27 12:59:31 -07:00
Paul E. McKenney 0f41c0ddad rcu: Provide diagnostic option to slow down grace-period scans
Grace-period scans of the rcu_node combining tree normally
proceed quite quickly, so that it is very difficult to reproduce
races against them.  This commit therefore allows grace-period
pre-initialization and cleanup to be artificially slowed down,
increasing race-reproduction probability.  A pair of pairs of new
Kconfig parameters are provided, RCU_TORTURE_TEST_SLOW_PREINIT to
enable the slowing down of propagating CPU-hotplug changes up the
combining tree along with RCU_TORTURE_TEST_SLOW_PREINIT_DELAY to
specify the delay in jiffies, and RCU_TORTURE_TEST_SLOW_CLEANUP
to enable the slowing down of the end-of-grace-period cleanup scan
along with RCU_TORTURE_TEST_SLOW_CLEANUP_DELAY to specify the delay
in jiffies.  Boot-time parameters named rcutree.gp_preinit_delay and
rcutree.gp_cleanup_delay allow these delays to be specified at boot time.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-05-27 12:59:02 -07:00
Masami Hiramatsu dddc7ee32f perf probe: Fix an error when deleting probes successfully
Fix a bug in del_perf_probe_events() which returns an error (-ENOENT)
even if the probes are successfully deleted.

This happens only if the probes are on user-apps and not on kernel,
simply because it doesn't clear the previous error.

So, without this fix, we get an error even though events are being
successfully removed.

  ------
  # ./perf probe -x ./perf del_perf_probe_events
  Added new event:
    probe_perf:del_perf_probe_events (on del_perf_probe_events in ...

  You can now use it in all perf tools, such as:

          perf record -e probe_perf:del_perf_probe_events -aR sleep 1

  # ./perf probe -d \*:\*
  Removed event: probe_perf:del_perf_probe_events
    Error: Failed to delete events.
  ------

This fixes the above error.
  ------
  # ./perf probe -d \*:\*
  Removed event: probe_perf:del_perf_probe_events
  ------

Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Link: http://lkml.kernel.org/r/20150527083725.23880.45209.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-27 12:21:46 -03:00
Masami Hiramatsu 419e873828 perf probe: Show the error reason comes from invalid DSO
Show the reason of error when dso__load* fails. This shows when user
gives wrong kernel image or wrong path.

Without this, perf probe shows an obscure message:

  ----
  $ perf probe -k ~/kbin/linux-3.x86_64/vmlinux -L vfs_read
  Failed to find path of kernel module.
    Error: Failed to show lines.
  ----

With this, perf shows appropriate error message:

  ----
  $ perf probe -k ~/kbin/linux-3.x86_64/vmlinux -L vfs_read
  Failed to find the path for kernel: Mismatching build id
    Error: Failed to show lines.
  ----

And:

  ----
  $ perf probe -k /non-exist/kernel/vmlinux -L vfs_read
  Failed to find the path for kernel: No such file or directory
    Error: Failed to show lines.
  ----

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Link: http://lkml.kernel.org/r/20150527083718.23880.84100.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-27 12:21:45 -03:00
Adrian Hunter 9b5d1c2955 perf tools: Disallow PMU events intel_pt and intel_bts until there is support
Disallow PMU events intel_pt and intel_bts until the tools support them.

By default any PMU is selectable as an event but until the tools have
intel_pt and intel_bts support using them would result in no data being
recorded without any indication as to why.

Before the change:

    $ perf record -e intel_bts// sleep 1
    [ perf record: Woken up 1 times to write data ]
    [ perf record: Captured and wrote 0.008 MB perf.data ]
    $ perf report --stdio
    Error:
    The perf.data file has no samples!

After the change:

    $ perf record -e intel_bts// sleep 1
    invalid or unsupported event: 'intel_bts//'
    Run 'perf list' for a list of valid events

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1432295653-13989-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-27 12:21:45 -03:00
Josef Bacik 2f80dd4488 perf sched: Add option to merge like comms to lat output
Sometimes when debugging large multi-threaded applications it is helpful
to collate all of the latency numbers into one bulk record to get an
idea of what is going on.

This patch does this by merging any entries that belong to the same comm
into one entry and then spits out those totals.

I've also slightly changed the output so you can see how many threads
were merged in the processing.  Here is the new default output format

 -----------------------------------------------------------------------------------------------------------
  Task                 | Runtime ms  | Switches | Average delay ms | Maximum delay ms | Maximum delay at    |
 -----------------------------------------------------------------------------------------------------------
  chrome:(23)          |  740.878 ms |     2612 | avg:    0.022 ms | max:    0.845 ms | max at: 7935.254223 s
  pulseaudio:1523      |   94.440 ms |      597 | avg:    0.027 ms | max:    0.110 ms | max at: 7934.668372 s
  threaded-ml:6042     |   72.554 ms |      386 | avg:    0.035 ms | max:    1.186 ms | max at: 7935.330911 s
  Chrome_IOThread:3832 |   52.388 ms |      456 | avg:    0.021 ms | max:    1.365 ms | max at: 7935.330602 s
  Chrome_ChildIOT:(7)  |   50.694 ms |      743 | avg:    0.021 ms | max:    1.448 ms | max at: 7935.256659 s
  Compositor:5510      |   30.012 ms |      192 | avg:    0.019 ms | max:    0.131 ms | max at: 7936.636815 s
  plugin_audio_th:6043 |   24.828 ms |      314 | avg:    0.018 ms | max:    0.143 ms | max at: 7936.205994 s
  CompositorTileW:(2)  |   14.099 ms |       45 | avg:    0.022 ms | max:    0.153 ms | max at: 7937.521800 s

the (#) after the task is the number of tasks merged, and then if there were
no tasks merged it just shows the pid.  Here is the same trace file with the -p
option to print the per-pid latency numbers

 -----------------------------------------------------------------------------------------------------------
  Task                 | Runtime ms  | Switches | Average delay ms | Maximum delay ms | Maximum delay at    |
 -----------------------------------------------------------------------------------------------------------
  chrome:5500          |  386.872 ms |      387 | avg:    0.023 ms | max:    0.241 ms | max at: 7936.001694 s
  pulseaudio:1523      |   94.440 ms |      597 | avg:    0.027 ms | max:    0.110 ms | max at: 7934.668372 s
  threaded-ml:6042     |   72.554 ms |      386 | avg:    0.035 ms | max:    1.186 ms | max at: 7935.330911 s
  chrome:10226         |   69.710 ms |      251 | avg:    0.023 ms | max:    0.764 ms | max at: 7935.992305 s
  chrome:4267          |   64.551 ms |      418 | avg:    0.021 ms | max:    0.294 ms | max at: 7937.862427 s
  chrome:4827          |   62.268 ms |       54 | avg:    0.029 ms | max:    0.666 ms | max at: 7935.992813 s
  Chrome_IOThread:3832 |   52.388 ms |      456 | avg:    0.021 ms | max:    1.365 ms | max at: 7935.330602 s
  chrome:3776          |   46.150 ms |      349 | avg:    0.023 ms | max:    0.845 ms | max at: 7935.254223 s

Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/1432300720-30478-1-git-send-email-jbacik@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-27 12:21:45 -03:00
Martin Liska e8b7ea4356 perf tools: Improve setting of gcc debug option
Correct debugging experience is given by passing -Og to compiler.

Do it in a way that supports older compilers

Signed-off-by: Martin Liska <mliska@suse.cz>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/5564393C.1090104@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-27 12:21:45 -03:00
Martin Liška 5bcaaca3e4 perf tools: Assign default value for some pointers
Assign default value for pointers that are identified by the compiler as
non-initialized.

Signed-off-by: Martin Liska <mliska@suse.cz>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/5564393C.1090104@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-27 12:21:45 -03:00
Arnaldo Carvalho de Melo 4bb7123dcf perf tools: Use maps__first()/map__next()
In a few more remaining places, for consistency.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-c2n7slwtto29wndfttdrhfrx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-27 12:21:45 -03:00