Commit Graph

3917 Commits

Author SHA1 Message Date
Linus Torvalds f17a6f7859 PCI changes for v3.17 (part 3):
Marvell MVEBU
     - Remove ARCH_KIRKWOOD dependency (Andrew Lunn)
 
   NVIDIA Tegra
     - Add debugfs support (Thierry Reding)
 
   Synopsys DesignWare
     - Look for configuration space in 'reg', not 'ranges' (Kishon Vijay Abraham I)
     - Program ATU with untranslated address (Kishon Vijay Abraham I)
     - Add config access-related pcie_host_ops for v3.65 hardware (Murali Karicheri)
     - Add MSI-related pcie_host_ops for v3.65 hardware (Murali Karicheri)
 
   TI DRA7xx
     - Add TI DR7xx PCIe driver (Kishon Vijay Abraham I)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT8s0TAAoJEFmIoMA60/r853cQALnowzIdDhd0jq+IEpEq3PaO
 6e1fssstRbCWV+UoV09EgcRAGbehscnqGi+Ug3y0k+orqBE8R5mkUrJ13ddTlMrP
 WCYsxDWrAwiEI0R/YZ189yeWMyzzYWG+FtwR/iLAYZihz/edHz5P9Qb3gc+rg0S+
 /1hj50CrpXfUACQfyqCXSI6MNFyoSYo4z+BG9y/6A8/xg3nMRhxV93MjkurXW9Kn
 KqsF8xtKvhI//EFwGPGpN30pZdYoRxjbqcOd/XranZ9oZ7egQtV3NJyXzkXGkAwj
 rOR5usn9Cyi5MU0N79vPxxQYJXIJnPdHe5tpWXQoxOBTZ48crOP6aFRH6AFLteLW
 KLRuZKeKBdTXIJx5BIj+gEesnG8HAlv263+2Uzoyw7Qiz7dT6zl4+Z7YGonMxSAW
 HxhQhF8MPUfwBP738hIcM5L2pIJsDrHuhVi4Ff/ndqdFfnN6qx75avVO4l4gmjpl
 6RdsJnb8LjwTQpG8fQcojzEqmxrOSRei0fG8vmw0hCBQq23aNpe2TARBgxY8T3cO
 l7tBY4VyiJy7Q8zfhqGDKqv9QT4gQbwLZx+xZrbDgTkkt+dHCb6eqATbRqCpQ02X
 yuKAuj9eqFcZVscSNddRg1p/1iBaZHzpgWRUUXtJ7hBtWol9dFtFcnp+ibPPZy+4
 uZ3TmYr/Yb408FbUHBJB
 =XIzM
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.17-changes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:
 "Marvell MVEBU
    - Remove ARCH_KIRKWOOD dependency (Andrew Lunn)

  NVIDIA Tegra
    - Add debugfs support (Thierry Reding)

  Synopsys DesignWare
    - Look for configuration space in 'reg', not 'ranges' (Kishon Vijay Abraham I)
    - Program ATU with untranslated address (Kishon Vijay Abraham I)
    - Add config access-related pcie_host_ops for v3.65 hardware (Murali Karicheri)
    - Add MSI-related pcie_host_ops for v3.65 hardware (Murali Karicheri)

  TI DRA7xx
    - Add TI DR7xx PCIe driver (Kishon Vijay Abraham I)"

* tag 'pci-v3.17-changes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: designware: Add MSI-related pcie_host_ops for v3.65 hardware
  PCI: designware: Add config access-related pcie_host_ops for v3.65 hardware
  PCI: dra7xx: Add TI DRA7xx PCIe driver
  PCI: designware: Program ATU with untranslated address
  PCI: designware: Look for configuration space in 'reg', not 'ranges'
  PCI: tegra: Add debugfs support
  PCI: mvebu: Remove ARCH_KIRKWOOD dependency
2014-08-19 09:45:31 -05:00
Linus Torvalds a11c5c9ef6 PCI changes for the v3.17 merge window (part 2):
Miscellaneous
     - Remove DEFINE_PCI_DEVICE_TABLE macro use (Benoit Taine)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT7PyAAAoJEFmIoMA60/r8kjQQALr/8oEfZoVcjgCb7waWOr25
 hUTnrI6GBIAh/50hoBiPq0ouPCAKVv66+CUhuhFkLP7oJz+rMU0B9hfUvdLfmCpH
 7ppaallkllT9nPFIr7h5RUWLXsoQyuHmCYmSrUCcnlT2LPgU0dN72YWElLisEM6Z
 Pldg3933xyIQaCWviHjGEjWb7NvC+JY4pTkV5iyqGgU8Ale/eFYtLLSfdBEjIbGv
 VDirYZmKELYeuncZPrTAsp4IENRMZn702wwDakMSODVMEWtJB5h4yrBawqQDlFP5
 9ztIX6n9p9zkdVKbYZlx/Xwv6SYEnYXLxauVQMSO3Nck7Z10R5Ud+5uuCg/6mWH8
 AQI4UV5bbJcg7zHgocTG9XLFLFPoPtD2JT6k6UT1LeUAiAOqcSzhRO+/qJBmJOWZ
 Zv+EHXPlxBrl0zNifut6ZQrY17teuItVtmha70a/9W3PjnIx3KecqLcTwdTvDsOY
 IAyH8WMZrBKpPpsczSmfE93i2Z1QRS91HEAOeSMxl/98dcDTdllYZS7spjoDll2f
 xmpGDbpriLSCu2XsGHfTC9RbqA7CyuFlHggJSQDkT/5Esli0sCs7eweTuK3RVvPu
 t6bUHK3yElb6x9qMZhb5q6l72wSMlGMishTdaxEHmqrEA8PtaIFodmVX2T/Zel5n
 GHN6bysPqDItNR2v/3JX
 =jJGu
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull DEFINE_PCI_DEVICE_TABLE removal from Bjorn Helgaas:
 "Part two of the PCI changes for v3.17:

    - Remove DEFINE_PCI_DEVICE_TABLE macro use (Benoit Taine)

  It's a mechanical change that removes uses of the
  DEFINE_PCI_DEVICE_TABLE macro.  I waited until later in the merge
  window to reduce conflicts, but it's possible you'll still see a few"

* tag 'pci-v3.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use
2014-08-14 18:10:33 -06:00
Linus Torvalds ae36e95cf8 The branch contains the following device tree changes the v3.17 merge
window:
 
 Group changes to the device tree. In preparation for adding device tree
 overlay support, OF_DYNAMIC is reworked so that a set of device tree
 changes can be prepared and applied to the tree all at once. OF_RECONFIG
 notifiers see the most significant change here so that users always get
 a consistent view of the tree. Notifiers generation is moved from before
 a change to after it, and notifiers for a group of changes are emitted
 after the entire block of changes have been applied
 
 Automatic console selection from DT. Console drivers can now use
 of_console_check() to see if the device node is specified as a console
 device. If so then it gets added as a preferred console. UART devices
 get this support automatically when uart_add_one_port() is called.
 
 DT unit tests no longer depend on pre-loaded data in the device tree.
 Data is loaded dynamically at the start of unit tests, and then unloaded
 again when the tests have completed.
 
 Also contains a few bugfixes for reserved regions and early memory setup.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT6M7XAAoJEMWQL496c2LNTTgP/2rXyrTTGZpK/qrLKHWKYHvr
 XL7tcTkhA0OLU64E37fB+xtDXyBYnLsharuwUFSd1LlL1Wnc1cZN5ORRlMJbmjUR
 Wvwl0A8/mkhGl4tzzKgJ4z4rMJXvlZfJRpnVoRB5FOn90LI7k/jsf5rIwF/6S90B
 6D6II0r4RG9ku1m7g70cToxcIFCzp0V+eu2tym9GnhsyGKlunPT9iNiTpwfVhPAj
 QUvMPKIQXReOv6xDU5q6E07839IMf7SdAvciBTHGnCDD7sGziHvnBIShj/2vTDAF
 27sGRKrWUnnuxRUMOoIudiYyeHXIdt1WXp6FsS/ztVI37Ijh9YPShJwWGhQDppnp
 4tcoSdefqw9IRUajAVWsB0RUW/tCL4a7tggWofylOA6itDi+HZnw6YafE1G1YzxF
 q8OFo9uqLcmFQfHDJpk+sdtXoMZzOgrxlEscsGsQ8kd2Uoe8+chgR9EY1sqPkWVF
 Zw0FJCTB6spBlsnXeboBGrnvpbPkacwhvesIFO0IANy4j4R55xlEeTcs1fe3ubUf
 UhNyyFdnCAUA7e5CAabcAQYsdbEKG6v0Il3H6xts36c8lXCSFXVgNcw5mdCpFCcQ
 DZ3/1FGSVzkYNXX8hlzIn1W0dqvwn4x0ZbnpXUJrGUBpSmjt9qkXx0XbdeFwartU
 7X4tNGS1jfNYhOdP87jF
 =8IFz
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux

Pull device tree updates from Grant Likely:
 "The branch contains the following device tree changes the v3.17 merge
  window:

  Group changes to the device tree.  In preparation for adding device
  tree overlay support, OF_DYNAMIC is reworked so that a set of device
  tree changes can be prepared and applied to the tree all at once.
  OF_RECONFIG notifiers see the most significant change here so that
  users always get a consistent view of the tree.  Notifiers generation
  is moved from before a change to after it, and notifiers for a group
  of changes are emitted after the entire block of changes have been
  applied

  Automatic console selection from DT.  Console drivers can now use
  of_console_check() to see if the device node is specified as a console
  device.  If so then it gets added as a preferred console.  UART
  devices get this support automatically when uart_add_one_port() is
  called.

  DT unit tests no longer depend on pre-loaded data in the device tree.
  Data is loaded dynamically at the start of unit tests, and then
  unloaded again when the tests have completed.

  Also contains a few bugfixes for reserved regions and early memory
  setup"

* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: (21 commits)
  of: Fixing OF Selftest build error
  drivers: of: add automated assignment of reserved regions to client devices
  of: Use proper types for checking memory overflow
  of: typo fix in __of_prop_dup()
  Adding selftest testdata dynamically into live tree
  of: Add todo tasklist for Devicetree
  of: Transactional DT support.
  of: Reorder device tree changes and notifiers
  of: Move dynamic node fixups out of powerpc and into common code
  of: Make sure attached nodes don't carry along extra children
  of: Make devicetree sysfs update functions consistent.
  of: Create unlocked versions of node and property add/remove functions
  OF: Utility helper functions for dynamic nodes
  of: Move CONFIG_OF_DYNAMIC code into a separate file
  of: rename of_aliases_mutex to just of_mutex
  of/platform: Fix of_platform_device_destroy iteration of devices
  of: Migrate of_find_node_by_name() users to for_each_node_by_name()
  tty: Update hypervisor tty drivers to use core stdout parsing code.
  arm/versatile: Add the uart as the stdout device.
  of: Enable console on serial ports specified by /chosen/stdout-path
  ...
2014-08-14 09:53:39 -06:00
Benoit Taine 9baa3c34ac PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to
meet kernel coding style guidelines.  This issue was reported by checkpatch.

A simplified version of the semantic patch that makes this change is as
follows (http://coccinelle.lip6.fr/):

// <smpl>

@@
identifier i;
declarer name DEFINE_PCI_DEVICE_TABLE;
initializer z;
@@

- DEFINE_PCI_DEVICE_TABLE(i)
+ const struct pci_device_id i[]
= z;

// </smpl>

[bhelgaas: add semantic patch]
Signed-off-by: Benoit Taine <benoit.taine@lip6.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-08-12 12:15:14 -06:00
Linus Torvalds 10c8e05620 ARM: SoC driver changes for 3.17
A handful of driver-related changes. We've had a bunch of them going in through
 other branches as well, so it's only a part of what we really have this release.
 
 Larger pieces are:
 
 * Removal of a now unused PWM driver for atmel
   - This includes AVR32 changes that have been appropriately acked.
 * Performance counter support for the arm CCN interconnect
 * OMAP mailbox driver cleanups and consolidation
 * PCI and SATA PHY drivers for SPEAr 13xx platforms
 * Redefinition (with backwards compatibility!) of PCI DT bindings for Tegra to
   better model regulators/power.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJT5DrJAAoJEIwa5zzehBx3wkkP/iwEfEK5mMon9KEe4DcKTKNq
 Z6xyWuMQNHKdfBFpABs6AsHQCKDc7KK6gN3+2zLLHEJ4XGDPZ2g2NaX3oRPJlaay
 BDK7rQfIZyi4tmbOnlEv1BDTYgirYBPMwk9RyNo/04Ug3W+Y67aSVo44zkNFBWaJ
 GbcX/zYsrsfvdawuQMW6V/A835s3Kq5Zhv1ikPr8gDDjswZRBAT6i7FYpBSHQ8K8
 bH6C1891Xit6rxXSLXJyrtM8CAet7PtLTqNr/IKdUaJnGD+fJm5EonxW+g8gvhN8
 gOEkm3nM60++kdDlzZCQVNr0m1+ih6NNCr6bDLO6rIRpAJM2O+YrN1rWuZaJOu1A
 pIvifk+wWHT+o52pXk8g9fK4n/ZJydK3IBzDePHMrIROOEiW5tLE3WA+u3NSfMfH
 WegMt9E2dcB+5gXPeejZ9gFbAHnh2S1oVTZfCYXtuOHrYiEU9U0FA3eRYvJEE2po
 k8sdiOn7Vc65O1QZ+xZNbLABpAHaye7X2evOJyhSutzHE/AtUvT4vuCAZ0tggXyD
 E1qVKngVW/NvcoFbwYeidq4bOVgiAEn3idZgF5gEq1mq7LzetXUQAcZAOQfLWHLQ
 RrXufS7Ez8pSCG74y0AFReVfQH2PgWHPqGUGj99NXgQauexc/vR1Hc5Iqb8liGNJ
 n6i8RqvvQ4KYcmHEXDIT
 =fsP6
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver changes from Olof Johansson:
 "A handful of driver-related changes.  We've had a bunch of them going
  in through other branches as well, so it's only a part of what we
  really have this release.

  Larger pieces are:

   - Removal of a now unused PWM driver for atmel
     [ This includes AVR32 changes that have been appropriately acked ]
   - Performance counter support for the arm CCN interconnect
   - OMAP mailbox driver cleanups and consolidation
   - PCI and SATA PHY drivers for SPEAr 13xx platforms
   - Redefinition (with backwards compatibility!) of PCI DT bindings for
     Tegra to better model regulators/power"

Note: this merge also fixes up the semantic conflict with the new
calling convention for devm_phy_create(), see commit f0ed817638 ("phy:
core: Let node ptr of PHY point to PHY and not of PHY provider") that
came in through Greg's USB tree.

Semantic merge patch by Stephen Rothwell <sfr@canb.auug.org.au> through
the next tree.

* tag 'drivers-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
  bus: arm-ccn: Fix error handling at event allocation
  mailbox/omap: add a parent structure for every IP instance
  mailbox/omap: remove the private mailbox structure
  mailbox/omap: consolidate OMAP mailbox driver
  mailbox/omap: simplify the fifo assignment by using macros
  mailbox/omap: remove omap_mbox_type_t from mailbox ops
  mailbox/omap: remove OMAP1 mailbox driver
  mailbox/omap: use devm_* interfaces
  bus: ARM CCN: add PERF_EVENTS dependency
  bus: ARM CCN PMU driver
  PCI: spear: Remove spear13xx_pcie_remove()
  PCI: spear: Fix Section mismatch compilation warning for probe()
  ARM: tegra: Remove legacy PCIe power supply properties
  PCI: tegra: Remove deprecated power supply properties
  PCI: tegra: Implement accurate power supply scheme
  ARM: SPEAr13xx: Update defconfigs
  ARM: SPEAr13xx: Add pcie and miphy DT nodes
  ARM: SPEAr13xx: Add bindings and dt node for misc block
  ARM: SPEAr13xx: Fix static mapping table
  phy: Add drivers for PCIe and SATA phy on SPEAr13xx
  ...
2014-08-08 11:34:32 -07:00
Linus Torvalds 44c916d58b ARM: SoC cleanups for 3.17
This merge window brings a good size of cleanups on various
 platforms. Among the bigger ones:
 
 * Removal of Samsung s5pc100 and s5p64xx platforms. Both of these have
   lacked active support for quite a while, and after asking around nobody
   showed interest in keeping them around. If needed, they could be
   resurrected in the future but it's more likely that we would prefer
   reintroduction of them as DT and multiplatform-enabled platforms
   instead.
 * OMAP4 controller code register define diet. They defined a lot of registers
   that were never actually used, etc.
 * Move of some of the Tegra platform code (PMC, APBIO, fuse, powergate)
   to drivers/soc so it can be shared with 64-bit code. This also converts them
   over to traditional driver models where possible.
 * Removal of legacy gpio-samsung driver, since the last users have been
   removed (moved to pinctrl)
 
 Plus a bunch of smaller changes for various platforms that sort of
 dissapear in the diffstat for the above. clps711x cleanups, shmobile
 header file refactoring/moves for multiplatform friendliness, some misc
 cleanups, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJT5DYPAAoJEIwa5zzehBx37egQAIiatNiLLqZnfo3rwGADRz/a
 POfPovktj68aPcobyzoyhFtToMqGvi9PpysyFTIQD2HJFG+5BtiIAuqtg0875zDe
 EpBWgsfugrm0YktJWAtUerj60oAmNPbKfaEm1cOOWuM2lb2mV+QkRrwSTAgsqkT7
 927BzMXKKBRPOVLL0RYhoF8EXa0Eg8kCqAHP8fJrzVYkRp+UrZJDnGiUP1XmWJN+
 VXQMu5SEjcPMtqT7+tfX455RfREHJfBcJ1ZN/dPF8HMWDwClQG0lyc6hifh1MxwO
 8DjIZNkfZeKqgDqVyC17re7pc7p8md5HL8WXbrKpK0A9vQ5bRexbPHxcwJ1T/C2Y
 465H+st5XXbuzV1gbMwjK1/ycsH0tCyffckk8Yl/2e1Fs7GgPNbAELtTdl+5vV1Y
 xmDXkyo/9WlRM3LQ23IGKwW7VzN86EfWVuShssfro0fO7xDdb4OOYLdQI+4bCG+h
 ytQYun1vU32OEyNik5RVNQuZaMrv2c93a3bID4owwuPHPmYOPVUQaqnRX/0E51eA
 aHZYbk2GlUOV3Kq5aSS4iyLg1Yj+I9/NeH9U+A4nc+PQ5FlgGToaVSCuYuw4DqbP
 AAG+sqQHbkBMvDPobQz/yd1qZbAb4eLhGy11XK1t5S65rApWI55GwNXnvbyxqt8x
 wpmxJTASGxcfuZZgKXm7
 =gbcE
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This merge window brings a good size of cleanups on various platforms.
  Among the bigger ones:

   - Removal of Samsung s5pc100 and s5p64xx platforms.  Both of these
     have lacked active support for quite a while, and after asking
     around nobody showed interest in keeping them around.  If needed,
     they could be resurrected in the future but it's more likely that
     we would prefer reintroduction of them as DT and
     multiplatform-enabled platforms instead.

   - OMAP4 controller code register define diet.  They defined a lot of
     registers that were never actually used, etc.

   - Move of some of the Tegra platform code (PMC, APBIO, fuse,
     powergate) to drivers/soc so it can be shared with 64-bit code.
     This also converts them over to traditional driver models where
     possible.

   - Removal of legacy gpio-samsung driver, since the last users have
     been removed (moved to pinctrl)

  Plus a bunch of smaller changes for various platforms that sort of
  dissapear in the diffstat for the above.  clps711x cleanups, shmobile
  header file refactoring/moves for multiplatform friendliness, some
  misc cleanups, etc"

* tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits)
  drivers: CCI: Correct use of ! and &
  video: clcd-versatile: Depend on ARM
  video: fix up versatile CLCD helper move
  MAINTAINERS: Add sdhci-st file to ARCH/STI architecture
  ARM: EXYNOS: Fix build breakge with PM_SLEEP=n
  MAINTAINERS: Remove Kirkwood
  ARM: tegra: Convert PMC to a driver
  soc/tegra: fuse: Set up in early initcall
  ARM: tegra: Always lock the CPU reset vector
  ARM: tegra: Setup CPU hotplug in a pure initcall
  soc/tegra: Implement runtime check for Tegra SoCs
  soc/tegra: fuse: fix dummy functions
  soc/tegra: fuse: move APB DMA into Tegra20 fuse driver
  soc/tegra: Add efuse and apbmisc bindings
  soc/tegra: Add efuse driver for Tegra
  ARM: tegra: move fuse exports to soc/tegra/fuse.h
  ARM: tegra: export apb dma readl/writel
  ARM: tegra: Use a function to get the chip ID
  ARM: tegra: Sort includes alphabetically
  ARM: tegra: Move includes to include/soc/tegra
  ...
2014-08-08 11:00:26 -07:00
Linus Torvalds ebb067d2f4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
 "Mostly cleanups and bug-fixes, with two exceptions.

  The first is lazy flushing of I/O-TLBs for PCI to improve performance,
  the second is software dirty bits in the pmd for the madvise-free
  implementation"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits)
  s390/locking: Reenable optimistic spinning
  s390/mm: implement dirty bits for large segment table entries
  KVM: s390/mm: Fix page table locking vs. split pmd lock
  s390/dasd: fix camel case
  s390/3215: fix hanging console issue
  s390/irq: improve displayed interrupt order in /proc/interrupts
  s390/seccomp: fix error return for filtered system calls
  s390/pci: introduce lazy IOTLB flushing for DMA unmap
  dasd: fix error recovery for alias devices during format
  dasd: fix list_del corruption during format
  dasd: fix unresponsive device during format
  dasd: use aliases for formatted devices during format
  s390/pci: fix kmsg component
  s390/kdump: Return NOTIFY_OK for all actions other than MEM_GOING_OFFLINE
  s390/watchdog: Fix module name in Kconfig help text
  s390/dasd: replace seq_printf by seq_puts
  s390/dasd: replace pr_warning by pr_warn
  s390/dasd: Move EXPORT_SYMBOL after function/variable
  s390/dasd: remove unnecessary null test before debugfs_remove
  s390/zfcp: use qdio buffer helpers
  ...
2014-08-07 08:41:00 -07:00
Linus Torvalds 7725131982 ACPI and power management updates for 3.17-rc1
- ACPICA update to upstream version 20140724.  That includes
    ACPI 5.1 material (support for the _CCA and _DSD predefined names,
    changes related to the DMAR and PCCT tables and ARM support among
    other things) and cleanups related to using ACPICA's header files.
    A major part of it is related to acpidump and the core code used
    by that utility.  Changes from Bob Moore, David E Box, Lv Zheng,
    Sascha Wildner, Tomasz Nowicki, Hanjun Guo.
 
  - Radix trees for memory bitmaps used by the hibernation core from
    Joerg Roedel.
 
  - Support for waking up the system from suspend-to-idle (also known
    as the "freeze" sleep state) using ACPI-based PCI wakeup signaling
    (Rafael J Wysocki).
 
  - Fixes for issues related to ACPI button events (Rafael J Wysocki).
 
  - New device ID for an ACPI-enumerated device included into the
    Wildcat Point PCH from Jie Yang.
 
  - ACPI video updates related to backlight handling from Hans de Goede
    and Linus Torvalds.
 
  - Preliminary changes needed to support ACPI on ARM from Hanjun Guo
    and Graeme Gregory.
 
  - ACPI PNP core cleanups from Arjun Sreedharan and Zhang Rui.
 
  - Cleanups related to ACPI_COMPANION() and ACPI_HANDLE() macros
    (Rafael J Wysocki).
 
  - ACPI-based device hotplug cleanups from Wei Yongjun and
    Rafael J Wysocki.
 
  - Cleanups and improvements related to system suspend from
    Lan Tianyu, Randy Dunlap and Rafael J Wysocki.
 
  - ACPI battery cleanup from Wei Yongjun.
 
  - cpufreq core fixes from Viresh Kumar.
 
  - Elimination of a deadband effect from the cpufreq ondemand
    governor and intel_pstate driver cleanups from Stratos Karafotis.
 
  - 350MHz CPU support for the powernow-k6 cpufreq driver from
    Mikulas Patocka.
 
  - Fix for the imx6 cpufreq driver from Anson Huang.
 
  - cpuidle core and governor cleanups from Daniel Lezcano,
    Sandeep Tripathy and Mohammad Merajul Islam Molla.
 
  - Build fix for the big_little cpuidle driver from Sachin Kamat.
 
  - Configuration fix for the Operation Performance Points (OPP)
    framework from Mark Brown.
 
  - APM cleanup from Jean Delvare.
 
  - cpupower utility fixes and cleanups from Peter Senna Tschudin,
    Andrey Utkin, Himangi Saraogi, Rickard Strandqvist, Thomas Renninger.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJT4nhtAAoJEILEb/54YlRxtZEP/2rtVQFSFdAW8l0Xm1SeSsl4
 EnZpSNT1TFn+NdG23vSIot5Jzdz1/dLfeoJEbXpoVt4DPC9/PK4HPlv5FEDQYfh5
 srftvvGcAva969sXzSBRNUeR+M8Yd2RdoYCfmqTEUjzf8GJLL4jC0VAIwMtsQklt
 EbiQX8JaHQS7RIql7MDg1N2vaTo+zxkf39Kkcl56usmO/uATP7cAPjFreF/xQ3d8
 OyBhz1cOXIhPw7bd9Dv9AgpJzA8WFpktDYEgy2sluBWMv+mLYjdZRCFkfpIRzmea
 pt+hJDeAy8ZL6/bjWCzz2x6wG7uJdDLblreI28sgnJx/VHR3Co6u4H1BqUBj18ct
 CHV6zQ55WFmx9/uJqBtwFy333HS2ysJziC5ucwmg8QjkvAn4RK8S0qHMfRvSSaHj
 F9ejnHGxyrc3zzfsngUf/VXIp67FReaavyKX3LYxjHjMPZDMw2xCtCWEpUs52l2o
 fAbkv8YFBbUalIv0RtELH5XnKQ2ggMP8UgvT74KyfXU6LaliH8lEV20FFjMgwrPI
 sMr2xk04eS8mNRNAXL8OMMwvh6DY/Qsmb7BVg58RIw6CdHeFJl834yztzcf7+j56
 4oUmA16QYBCFA3udGQ3Tb07mi8XTfrMdTOGA0koQG9tjswKXuLUXUk9WAXZe4vml
 ItRpZKE86BCs3mLJMYre
 =ZODv
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:
 "Again, ACPICA leads the pack (47 commits), followed by cpufreq (18
  commits) and system suspend/hibernation (9 commits).

  From the new code perspective, the ACPICA update brings ACPI 5.1 to
  the table, including a new device configuration object called _DSD
  (Device Specific Data) that will hopefully help us to operate device
  properties like Device Trees do (at least to some extent) and changes
  related to supporting ACPI on ARM.

  Apart from that we have hibernation changes making it use radix trees
  to store memory bitmaps which should speed up some operations carried
  out by it quite significantly.  We also have some power management
  changes related to suspend-to-idle (the "freeze" sleep state) support
  and more preliminary changes needed to support ACPI on ARM (outside of
  ACPICA).

  The rest is fixes and cleanups pretty much everywhere.

  Specifics:

   - ACPICA update to upstream version 20140724.  That includes ACPI 5.1
     material (support for the _CCA and _DSD predefined names, changes
     related to the DMAR and PCCT tables and ARM support among other
     things) and cleanups related to using ACPICA's header files.  A
     major part of it is related to acpidump and the core code used by
     that utility.  Changes from Bob Moore, David E Box, Lv Zheng,
     Sascha Wildner, Tomasz Nowicki, Hanjun Guo.

   - Radix trees for memory bitmaps used by the hibernation core from
     Joerg Roedel.

   - Support for waking up the system from suspend-to-idle (also known
     as the "freeze" sleep state) using ACPI-based PCI wakeup signaling
     (Rafael J Wysocki).

   - Fixes for issues related to ACPI button events (Rafael J Wysocki).

   - New device ID for an ACPI-enumerated device included into the
     Wildcat Point PCH from Jie Yang.

   - ACPI video updates related to backlight handling from Hans de Goede
     and Linus Torvalds.

   - Preliminary changes needed to support ACPI on ARM from Hanjun Guo
     and Graeme Gregory.

   - ACPI PNP core cleanups from Arjun Sreedharan and Zhang Rui.

   - Cleanups related to ACPI_COMPANION() and ACPI_HANDLE() macros
     (Rafael J Wysocki).

   - ACPI-based device hotplug cleanups from Wei Yongjun and Rafael J
     Wysocki.

   - Cleanups and improvements related to system suspend from Lan
     Tianyu, Randy Dunlap and Rafael J Wysocki.

   - ACPI battery cleanup from Wei Yongjun.

   - cpufreq core fixes from Viresh Kumar.

   - Elimination of a deadband effect from the cpufreq ondemand governor
     and intel_pstate driver cleanups from Stratos Karafotis.

   - 350MHz CPU support for the powernow-k6 cpufreq driver from Mikulas
     Patocka.

   - Fix for the imx6 cpufreq driver from Anson Huang.

   - cpuidle core and governor cleanups from Daniel Lezcano, Sandeep
     Tripathy and Mohammad Merajul Islam Molla.

   - Build fix for the big_little cpuidle driver from Sachin Kamat.

   - Configuration fix for the Operation Performance Points (OPP)
     framework from Mark Brown.

   - APM cleanup from Jean Delvare.

   - cpupower utility fixes and cleanups from Peter Senna Tschudin,
     Andrey Utkin, Himangi Saraogi, Rickard Strandqvist, Thomas
     Renninger"

* tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (118 commits)
  ACPI / LPSS: add LPSS device for Wildcat Point PCH
  ACPI / PNP: Replace faulty is_hex_digit() by isxdigit()
  ACPICA: Update version to 20140724.
  ACPICA: ACPI 5.1: Update for PCCT table changes.
  ACPICA/ARM: ACPI 5.1: Update for GTDT table changes.
  ACPICA/ARM: ACPI 5.1: Update for MADT changes.
  ACPICA/ARM: ACPI 5.1: Update for FADT changes.
  ACPICA: ACPI 5.1: Support for the _CCA predifined name.
  ACPICA: ACPI 5.1: New notify value for System Affinity Update.
  ACPICA: ACPI 5.1: Support for the _DSD predefined name.
  ACPICA: Debug object: Add current value of Timer() to debug line prefix.
  ACPICA: acpihelp: Add UUID support, restructure some existing files.
  ACPICA: Utilities: Fix local printf issue.
  ACPICA: Tables: Update for DMAR table changes.
  ACPICA: Remove some extraneous printf arguments.
  ACPICA: Update for comments/formatting. No functional changes.
  ACPICA: Disassembler: Add support for the ToUUID opererator (macro).
  ACPICA: Remove a redundant cast to acpi_size for ACPI_OFFSET() macro.
  ACPICA: Work around an ancient GCC bug.
  ACPI / processor: Make it possible to get local x2apic id via _MAT
  ...
2014-08-06 20:34:19 -07:00
Linus Torvalds 2521129a6d Char / Misc driver patches for 3.17-rc1
Here's the big driver misc / char pull request for 3.17-rc1.
 
 Lots of things in here, the thunderbolt support for Apple laptops, some
 other new drivers, testing fixes, and other good things.  All have been
 in linux-next for a long time.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlPf1LcACgkQMUfUDdst+ymaVwCgqMrKFmpduBufOSFROhxlfB5Q
 ajsAoNDmIn3pgla+kj23Y5ib20aMi++s
 =IdIr
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc driver patches from Greg KH:
 "Here's the big driver misc / char pull request for 3.17-rc1.

  Lots of things in here, the thunderbolt support for Apple laptops,
  some other new drivers, testing fixes, and other good things.  All
  have been in linux-next for a long time"

* tag 'char-misc-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (119 commits)
  misc: bh1780: Introduce the use of devm_kzalloc
  Lattice ECP3 FPGA: Correct endianness
  drivers/misc/ti-st: Load firmware from ti-connectivity directory.
  dt-bindings: extcon: Add support for SM5502 MUIC device
  extcon: sm5502: Change internal hardware switch according to cable type
  extcon: sm5502: Detect cable state after completing platform booting
  extcon: sm5502: Add support new SM5502 extcon device driver
  extcon: arizona: Get MICVDD against extcon device
  extcon: Remove unnecessary OOM messages
  misc: vexpress: Fix sparse non static symbol warnings
  mei: drop unused hw dependent fw status functions
  misc: bh1770glc: Use managed functions
  pcmcia: remove DEFINE_PCI_DEVICE_TABLE usage
  misc: remove DEFINE_PCI_DEVICE_TABLE usage
  ipack: Replace DEFINE_PCI_DEVICE_TABLE macro use
  drivers/char/dsp56k.c: drop check for negativity of unsigned parameter
  mei: fix return value on disconnect timeout
  mei: don't schedule suspend in pm idle
  mei: start disconnect request timer consistently
  mei: reset client connection state on timeout
  ...
2014-08-04 17:32:24 -07:00
Linus Torvalds d782cebd6b Merge branch 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Ingo Molnar:
 "The main changes in this cycle are:

   - RAS tracing/events infrastructure, by Gong Chen.

   - Various generalizations of the APEI code to make it available to
     non-x86 architectures, by Tomasz Nowicki"

* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ras: Fix build warnings in <linux/aer.h>
  acpi, apei, ghes: Factor out ioremap virtual memory for IRQ and NMI context.
  acpi, apei, ghes: Make NMI error notification to be GHES architecture extension.
  apei, mce: Factor out APEI architecture specific MCE calls.
  RAS, extlog: Adjust init flow
  trace, eMCA: Add a knob to adjust where to save event log
  trace, RAS: Add eMCA trace event interface
  RAS, debugfs: Add debugfs interface for RAS subsystem
  CPER: Adjust code flow of some functions
  x86, MCE: Robustify mcheck_init_device
  trace, AER: Move trace into unified interface
  trace, RAS: Add basic RAS trace event
  x86, MCE: Kill CPU_POST_DEAD
2014-08-04 17:21:59 -07:00
Linus Torvalds f74ad8df4e PCI changes for the v3.17 merge window:
Resource management
     - Support BAR sizes up to 128GB (Yinghai Lu)
     - Keep original resource if we fail to expand it (Guo Chao)
     - Return conventional error values from pci_revert_fw_address() (Bjorn Helgaas)
     - Tidy resource assignment messages (Bjorn Helgaas)
     - Don't exclude low BIOS area for non-PCI cards (Christoph Schulz)
 
   PCI device hotplug
     - Prevent NULL dereference during pciehp probe (Andreas Noever)
     - Make pciehp pcie_wait_cmd() self-contained (Bjorn Helgaas)
     - Wait for pciehp hotplug command completion lazily (Bjorn Helgaas)
     - Compute pciehp timeout from hotplug command start time (Bjorn Helgaas)
     - Remove pciehp assumptions about which commands cause completion events (Bjorn Helgaas)
     - Clear pciehp Data Link Layer State Changed during init (Myron Stowe)
     - Remove pciehp struct controller.no_cmd_complete (Rajat Jain)
     - Remove cpqphp unnecessary null test (Fabian Frederick)
     - Remove "invalid IRQ" warning for hot-added PCIe ports (Jiang Liu)
 
   IOMMU
     - Add DMA alias quirk for Intel 82801 bridge (Alex Williamson)
 
   MSI
     - Add internal msix_clear_and_set_ctrl() (Yijing Wang)
     - Remove unused msi_enabled_mask() (Yijing Wang)
     - Cache Multiple Message Capable in struct msi_desc (Yijing Wang)
     - Add msi_setup_entry() to clean up initialization (Yijing Wang)
     - Remove unused msi_remove_pci_irq_vectors() (Yijing Wang)
     - Retrieve first MSI IRQ from msi_desc rather than pci_dev (Yijing Wang)
     - Remove unused list access in __pci_restore_msix_state() (Yijing Wang)
     - Use irq_get_msi_desc() to simplify code (Yijing Wang)
 
   Generic host bridge driver
     - Fix GPL v2 license string typo (Bjorn Helgaas)
 
   Marvell MVEBU
     - Fix GPL v2 license string typo (Thierry Reding)
 
   NVIDIA Tegra
     - Use correct initial HW settings (Phil Edworthy)
     - Remove rcar_pcie_setup_window() resource argument (Phil Edworthy)
     - Fix GPL v2 license string typo (Thierry Reding)
 
   Renesas R-Car
     - Remove redundant config accessor register checks (Sergei Shtylyov)
     - Fix GPL v2 license string typo (Bjorn Helgaas)
 
   Virtualization
     - Factor secondary bus reset logic (Gavin Shan)
     - Remove duplicate powerpc reset logic (Gavin Shan)
 
   Miscellaneous
     - Rework default VGA detection for EFI (Bruno Prémont)
     - Fix sysfs "acpi_index" and "label" errors for NIC renaming (Simone Gotti)
     - Configure ASPM at pci_enable_device()-time (Vidya Sagar)
     - Add include/linux/pci_ids.h include guard (Rasmus Villemoes)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJTzppBAAoJEFmIoMA60/r8mtQP/jgVWCSU+0ulHjoxVSRLu4Lc
 UGKQFjS03oWWflHdvW6wZFqN82Ynva9fYCLMtiKdPg7cgTosSRT3I4DjAIm80ZI/
 kZvHxSmi6DBYmchZBsWzj60zxNiYZeEgd7CevzcJRHuwbKNMr2y12s6hjJbyl5lF
 ygaXWpDveKjsEDjyk9vKjUGwul/NJKynar253Yh178XaoypdGuiEIw3D1lQFMZZp
 ADcRijIi+CD2BENtDr6fbldbj+yQ93yyUSloEnaKtWZD+Ao5IsHngN0IyRu+l1Wl
 LFob0AsopeYVFKdw22Gn1KAq9Jj01acsSBRXjgrauU+tLY512Vkbp1lFYl85B/38
 /Z0VNHncmIh29rq9Tl2xQwEeI3Ja27FfnMjC70dLM5YjWf8vsYnDEQZHyxAAe15D
 p3H3YuuDjmvHkoSrHY/68DLfDl9ubw3/BFUlCMqijL7444ZWLXathrnCV8ZJimmr
 PlF/m7GtXYF4wIw19m9KQqNBUPJJEsVHExKzICOY4v5/nMlvx4ZkBDR3tPNEH1sk
 3AYKjLDw21Nle7yKcAlxDI/TYWZqxuph23UpevzlQd16tutq2i2FqpauiqI3DFm4
 VfYVbOVQwfeUJt11VOCgxvE7RsTxCk5QefB+YKVAdVK6vMZHeZxsetYvrCDptnea
 cId/NfiEFnmr+u3mAyPM
 =U5Ip
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "I'll be on vacation until Aug 11, and I suspect the merge window will
  open before then, so I'm sending this to you early.  There are more
  things I'd like to get into v3.17, so I hope to send another pull
  request soon after I return.

  The most notable pieces here are:

   - Support BARs up to 128GB (up from 8GB)
   - Fix SR-IOV resource assignment when we fail to expand a resource
   - Rework pciehp to handle a common hardware erratum
   - Cleanup MSI
   - Fix NIC renaming issue
   - Fix VGA default device issue on EFI systems
   - Fix ASPM configuration (previously we didn't enable it as expected)

  Alex Williamson has graciously agreed to take care of any major issues
  with this if you take it before I return.

  Details:

  Resource management
    - Support BAR sizes up to 128GB (Yinghai Lu)
    - Keep original resource if we fail to expand it (Guo Chao)
    - Return conventional error values from pci_revert_fw_address() (Bjorn Helgaas)
    - Tidy resource assignment messages (Bjorn Helgaas)
    - Don't exclude low BIOS area for non-PCI cards (Christoph Schulz)

  PCI device hotplug
    - Prevent NULL dereference during pciehp probe (Andreas Noever)
    - Make pciehp pcie_wait_cmd() self-contained (Bjorn Helgaas)
    - Wait for pciehp hotplug command completion lazily (Bjorn Helgaas)
    - Compute pciehp timeout from hotplug command start time (Bjorn Helgaas)
    - Remove pciehp assumptions about which commands cause completion events (Bjorn Helgaas)
    - Clear pciehp Data Link Layer State Changed during init (Myron Stowe)
    - Remove pciehp struct controller.no_cmd_complete (Rajat Jain)
    - Remove cpqphp unnecessary null test (Fabian Frederick)
    - Remove "invalid IRQ" warning for hot-added PCIe ports (Jiang Liu)

  IOMMU
    - Add DMA alias quirk for Intel 82801 bridge (Alex Williamson)

  MSI
    - Add internal msix_clear_and_set_ctrl() (Yijing Wang)
    - Remove unused msi_enabled_mask() (Yijing Wang)
    - Cache Multiple Message Capable in struct msi_desc (Yijing Wang)
    - Add msi_setup_entry() to clean up initialization (Yijing Wang)
    - Remove unused msi_remove_pci_irq_vectors() (Yijing Wang)
    - Retrieve first MSI IRQ from msi_desc rather than pci_dev (Yijing Wang)
    - Remove unused list access in __pci_restore_msix_state() (Yijing Wang)
    - Use irq_get_msi_desc() to simplify code (Yijing Wang)

  Generic host bridge driver
    - Fix GPL v2 license string typo (Bjorn Helgaas)

  Marvell MVEBU
    - Fix GPL v2 license string typo (Thierry Reding)

  NVIDIA Tegra
    - Use correct initial HW settings (Phil Edworthy)
    - Remove rcar_pcie_setup_window() resource argument (Phil Edworthy)
    - Fix GPL v2 license string typo (Thierry Reding)

  Renesas R-Car
    - Remove redundant config accessor register checks (Sergei Shtylyov)
    - Fix GPL v2 license string typo (Bjorn Helgaas)

  Virtualization
    - Factor secondary bus reset logic (Gavin Shan)
    - Remove duplicate powerpc reset logic (Gavin Shan)

  Miscellaneous
    - Rework default VGA detection for EFI (Bruno Prémont)
    - Fix sysfs "acpi_index" and "label" errors for NIC renaming (Simone Gotti)
    - Configure ASPM at pci_enable_device()-time (Vidya Sagar)
    - Add include/linux/pci_ids.h include guard (Rasmus Villemoes)"

* tag 'pci-v3.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (38 commits)
  PCI/MSI: Use irq_get_msi_desc() to simplify code
  PCI/MSI: Remove unused list access in __pci_restore_msix_state()
  PCI/MSI: Retrieve first MSI IRQ from msi_desc rather than pci_dev
  PCI/MSI: Remove unused function msi_remove_pci_irq_vectors()
  PCI/MSI: Add msi_setup_entry() to clean up MSI initialization
  PCI: Configure ASPM when enabling device
  x86: don't exclude low BIOS area when allocating address space for non-PCI cards
  PCI: generic: Fix GPL v2 license string typo
  PCI: rcar: Fix GPL v2 license string typo
  PCI: tegra: Fix GPL v2 license string typo
  PCI: mvebu: Fix GPL v2 license string typo
  PCI: Add include guard to include/linux/pci_ids.h
  x86, ia64: Move EFI_FB vga_default_device() initialization to pci_vga_fixup()
  PCI: Tidy resource assignment messages
  PCI: Return conventional error values from pci_revert_fw_address()
  PCI: Cleanup control flow
  PCI: Support BAR sizes up to 128GB
  PCI: cpqphp: Remove unnecessary null test before debugfs_remove()
  PCI: pciehp: Clear Data Link Layer State Changed during init
  PCI: Add bridge DMA alias quirk for Intel 82801 bridge
  ...
2014-08-04 09:29:37 -07:00
H. Peter Anvin c3107e3c50 APEI is currently implemented so that it depends on x86 hardware.
The primary dependency is that GHES uses the x86 NMI for hardware
 error notification and MCE for memory error handling. These patches
 remove that dependency.
 
 Other APEI features such as error reporting via external IRQ, error
 serialization, or error injection, do not require changes to use them
 on non-x86 architectures.
 
 The following patch set eliminates the APEI Kconfig x86 dependency
 by making these changes:
 - treat NMI notification as GHES architecture - HAVE_ACPI_APEI_NMI
 - group and wrap around #ifdef CONFIG_HAVE_ACPI_APEI_NMI code which
   is used only for NMI path
 - identify architectural boxes and abstract it accordingly (tlb flush and MCE)
 - rework ioremap for both IRQ and NMI context
 
 NMI code is kept in ghes.c file since NMI and IRQ context are tightly coupled.
 
 Note, these patches introduce no functional changes for x86. The NMI notification
 feature is hard selected for x86. Architectures that want to use this
 feature should also provide NMI code infrastructure.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT2BaPAAoJEKurIx+X31iBLGMP/0yyWOna4229p9CmuElSP3os
 Kb+9Thru+Wg4ihj43CYW0nznQnamCaqBa5NpDXZn0Ebtxc08SSGVzbf+z+vBMeD+
 HW4093m4g8sGL7i4JdAol0MEPpKTQRdpj525N/h/xWVSDXQ0Bq3vQ7DS1/j1Bp4k
 Lq3G8dEk+4LjNPcQ5YBPl71zWJOC4iUctfh1OpFdfgA04804Vis3j8T6ljE7/72M
 51xXK3af9ktIg6MU2HOwraUsSspVeJs/4lPu4fab4XI07BRDb4T7yx19a9VaBy67
 m6TaTd3eC/Z0Uh+51grNuXSnWQK4fvahRZJEwiRdC0wL3w3mhdZkmqm0nBdBFyof
 5b251+FOazOtZdMsWS/mMjQUjybQ+4k9zpnndIPw/5rqxJ8lgaP7o81e+hw1Xh1Q
 E0ZWUMXnAIkRmkyYLUv5aTICRYIZtAC/C1QrR5ZB/9Q+yvtxp13dbqGzWhcF7AIw
 UK/yb5T5ZAzvuJlmPG0ZiV75HH9bjX4OFV3AhXJIEG/iTOdVVpat8yICFrT33Xpc
 uAwRXQvz6mn2c2xpZcJqSJQlXKg2nbrfUmscU8P8Zu6mQpvBB/+2cDbW/5wfuKbE
 NpD0aB5PxhHY+nNvIfOsTUk72aZcZdUEQJt/792vhnMYb/IK1X/qa4zrVmOqlZKt
 mtXwUQWdj3kSG36mgssO
 =nYdd
 -----END PGP SIGNATURE-----

Merge tag 'please-pull-apei' into x86/ras

APEI is currently implemented so that it depends on x86 hardware.
The primary dependency is that GHES uses the x86 NMI for hardware
error notification and MCE for memory error handling. These patches
remove that dependency.

Other APEI features such as error reporting via external IRQ, error
serialization, or error injection, do not require changes to use them
on non-x86 architectures.

The following patch set eliminates the APEI Kconfig x86 dependency
by making these changes:
- treat NMI notification as GHES architecture - HAVE_ACPI_APEI_NMI
- group and wrap around #ifdef CONFIG_HAVE_ACPI_APEI_NMI code which
  is used only for NMI path
- identify architectural boxes and abstract it accordingly (tlb flush and MCE)
- rework ioremap for both IRQ and NMI context

NMI code is kept in ghes.c file since NMI and IRQ context are tightly coupled.

Note, these patches introduce no functional changes for x86. The NMI notification
feature is hard selected for x86. Architectures that want to use this
feature should also provide NMI code infrastructure.
2014-07-30 10:48:00 -07:00
Rafael J. Wysocki e5e0243e36 Merge branches 'acpi-video' and 'acpi-hotplug'
* acpi-video:
  ACPI: move models with win8 brightness problems from win8 blacklist to use_native_backlight
  ACPI / video: Fix backlight taking 2 steps on a brightness up/down keypress

* acpi-hotplug:
  ACPI / hotplug / PCI: Fix sparse non static symbol warning
  ACPI / hotplug: Simplify acpi_set_hp_context()
  ACPI / hotplug / PCI: Eliminate acpiphp_dev_to_bridge()
2014-07-27 23:55:54 +02:00
Rafael J. Wysocki 91af125c33 Merge branches 'acpi-pnp' and 'acpi-pci'
* acpi-pnp:
  ACPI / PNP: Use ACPI_COMPANION() instead of ACPI_HANDLE()
  ACPI / PNP: do ACPI binding directly

* acpi-pci:
  ACPI / PCI: Use ACPI_COMPANION() instead of ACPI_HANDLE()
2014-07-27 23:55:35 +02:00
Rafael J. Wysocki 85dbb3d05e ACPI / PCI: Use ACPI_COMPANION() instead of ACPI_HANDLE()
The ACPI_HANDLE() macro evaluates ACPI_COMPANION() internally to
return the handle of the device's ACPI companion, so it is much
more straightforward and efficient to use ACPI_COMPANION()
directly to obtain the device's ACPI companion object instead of
using ACPI_HANDLE() and acpi_bus_get_device() on the returned
handle for the same thing.

Use ACPI_COMPANION() instead of ACPI_HANDLE() in the PCI ACPI support
code.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-24 01:18:53 +02:00
Bjorn Helgaas 981c191778 Merge branches 'pci/host-designware', 'pci/host-mvebu' and 'pci/host-tegra' into next
* pci/host-designware:
  PCI: designware: Add MSI-related pcie_host_ops for v3.65 hardware
  PCI: designware: Add config access-related pcie_host_ops for v3.65 hardware
  PCI: dra7xx: Add TI DRA7xx PCIe driver
  PCI: designware: Program ATU with untranslated address
  PCI: designware: Look for configuration space in 'reg', not 'ranges'

* pci/host-mvebu:
  PCI: mvebu: Remove ARCH_KIRKWOOD dependency

* pci/host-tegra:
  PCI: tegra: Add debugfs support
2014-07-22 17:55:50 -06:00
Rafael J. Wysocki c072530f39 ACPI / PM: Revork the handling of ACPI device wakeup notifications
Since ACPI wakeup GPEs are going to be enabled during system suspend
as well as for runtime wakeup by a subsequent patch and the same
notify handlers will be used in both cases, rework the ACPI device
wakeup notification framework so that the part specific to physical
devices is always run asynchronously from the PM workqueue.  This
prevents runtime resume callbacks for those devices from being
run during system suspend and resume which may not be appropriate,
among other things.

Also make ACPI device wakeup notification handling a bit more robust
agaist subsequent removal of ACPI device objects, whould that ever
happen, and create a wakeup source object for each ACPI device
configured for wakeup so that wakeup notifications for those
devices can wake up the system from the "freeze" sleep state.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-23 01:00:45 +02:00
Murali Karicheri 2f37c5a81c PCI: designware: Add MSI-related pcie_host_ops for v3.65 hardware
DesignWare v3.65 hardware implements MSI controller registers in
application space.  This requires updates to the DesignWare core to
support controllers based on this older hardware.

Add msi_irq_set()/clear() interfaces to allow Set/Clear MSI IRQ enable bit
in the application register.  Also, v3.65 hardware uses the MSI_IRQ
register in application register space to raise MSI IRQ to the RC from EP.
Current code uses the standard mechanism as per PCI spec.  So add
get_msi_data() to get the address of this register so common code can
work on both v3.65 and newer hardware.

[bhelgaas: changelog]
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pratyush Anand <pratyush.anand@st.com>
Acked-by: Mohit Kumar <mohit.kumar@st.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: Grant Likely <grant.likely@linaro.org>
CC: Rob Herring <robh+dt@kernel.org>
CC: Richard Zhu <r65037@freescale.com>
CC: Kishon Vijay Abraham I <kishon@ti.com>
CC: Marek Vasut <marex@denx.de>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Pawel Moll <pawel.moll@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
CC: Kumar Gala <galak@codeaurora.org>
CC: Randy Dunlap <rdunlap@infradead.org>
CC: Grant Likely <grant.likely@linaro.org>
2014-07-22 16:47:29 -06:00
Murali Karicheri a1c0ae9c24 PCI: designware: Add config access-related pcie_host_ops for v3.65 hardware
DesignWare v3.65 hardware requires application space registers to be
configured to access the remote EP config space.

To support this, add rd_other_conf() and wr_other_conf() to pcie_host_ops.

[bhelgaas: changelog]
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pratyush Anand <pratyush.anand@st.com>
Acked-by: Mohit Kumar <mohit.kumar@st.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: Grant Likely <grant.likely@linaro.org>
CC: Rob Herring <robh+dt@kernel.org>
CC: Richard Zhu <r65037@freescale.com>
CC: Kishon Vijay Abraham I <kishon@ti.com>
CC: Marek Vasut <marex@denx.de>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Pawel Moll <pawel.moll@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
CC: Kumar Gala <galak@codeaurora.org>
CC: Randy Dunlap <rdunlap@infradead.org>
CC: Grant Likely <grant.likely@linaro.org>
2014-07-22 16:03:54 -06:00
Kishon Vijay Abraham I 47ff3de911 PCI: dra7xx: Add TI DRA7xx PCIe driver
Add support for PCIe controller in DRA7xx.  This driver re-uses the
designware core code that is already present in kernel.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Mohit Kumar <mohit.kumar@st.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
2014-07-22 15:26:24 -06:00
Kishon Vijay Abraham I f4c55c5a3f PCI: designware: Program ATU with untranslated address
In DRA7, the CPU sees 32-bit addresses, but the PCIe controller can see
only 28-bit addresses.  So whenever the CPU issues a read/write request,
the 4 most significant bits are used by L3 to determine the target
controller.  For example, the CPU reserves [mem 0x20000000-0x2fffffff]
for the PCIe controller but the PCIe controller will see only
[0x00000000-0x0fffffff].  For programming the outbound translation
window the *base* should be programmed as 0x00000000.  Whenever we try to
write to, e.g., 0x20000000, it will be translated to whatever we have
programmed in the translation window with base as 0x00000000.

This is needed when the dt node is modelled something like this:

    axi {
        compatible = "simple-bus";
        #size-cells = <1>;
        #address-cells = <1>;
        ranges = <0x0        0x20000000 0x10000000 // 28-bit bus
                  0x51000000 0x51000000 0x3000>;
        pcie@51000000 {
                reg = <0x1000 0x2000>, <0x51002000 0x14c>, <0x51000000 0x2000>;
                reg-names = "config", "ti_conf", "rc_dbics";
                #address-cells = <3>;
                #size-cells = <2>;
                ranges = <0x81000000 0 0          0x03000 0 0x00010000
                          0x82000000 0 0x20013000 0x13000 0 0xffed000>;
        };
    };

Here the CPU address for configuration space is 0x20013000 and the
controller address for configuration space is 0x13000.  The controller
address should be used while programming the ATU (in order for translation
to happen properly in DRA7xx).

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mohit Kumar <mohit.kumar@st.com>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
2014-07-22 15:26:24 -06:00
Kishon Vijay Abraham I 4dd964df36 PCI: designware: Look for configuration space in 'reg', not 'ranges'
The configuration address space has so far been specified in *ranges*,
however it should be specified in *reg* making it a platform MEM resource.
Hence used 'platform_get_resource_*' API to get configuration address space
in the designware driver.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Mohit Kumar <mohit.kumar@st.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
2014-07-22 14:17:47 -06:00
Thierry Reding 2cb989f6e9 PCI: tegra: Add debugfs support
Provide a debugfs file ("pcie/ports") that shows the current link status
for each root port.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2014-07-22 12:30:46 -06:00
Andrew Lunn c27602086d PCI: mvebu: Remove ARCH_KIRKWOOD dependency
mach-kirkwood has been removed, now that kirkwood lives in mach-mvebu.
ARCH_MVEBU is sufficient.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
2014-07-22 12:25:22 -06:00
Gerald Schaefer 896cb7e635 s390/pci: fix kmsg component
KMSG_COMPONENT has to be defined instead of COMPONENT.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22 09:26:21 +02:00
Wei Yongjun 902ee490fe ACPI / hotplug / PCI: Fix sparse non static symbol warning
Fixes the following sparse warning:

drivers/pci/hotplug/acpiphp_glue.c:923:6: warning:
 symbol 'acpiphp_drop_bridge' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-20 23:59:25 +02:00
Viresh Kumar 779ae55bd8 PCI: spear: Remove spear13xx_pcie_remove()
Following compilation warning occurs when compiled with:
CONFIG_DEBUG_SECTION_MISMATCH=y

 WARNING: vmlinux.o(.init.data+0x3338): Section mismatch in reference from the
 variable spear13xx_pcie_driver to the function
 .exit.text:spear13xx_pcie_remove()

This driver isn't allowed to unload, and so doesn't have a *_exit() routine. But
it still has spear13xx_pcie_remove() marked with __exit.

As this driver can't unload, .remove() would never be called, right? So get rid
of it.

Fixes: 51b66a6ce1 (PCI: spear: Add PCIe driver for ST Microelectronics SPEAr13xx)
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-20 12:27:50 -07:00
Viresh Kumar 6675ef212d PCI: spear: Fix Section mismatch compilation warning for probe()
Following compilation warning occurs when compiled with:
CONFIG_DEBUG_SECTION_MISMATCH=y

 WARNING: drivers/pci/host/built-in.o(.data+0xc0): Section mismatch in
 reference from the variable spear13xx_pcie_driver to the function
 .init.text:spear13xx_pcie_probe()

Both .probe() and pcie_init() are marked with __init, but spear13xx_pcie_driver
isn't. And so section mismatch.

Fix it by marking spear13xx_pcie_driver with __initdata.

Fixes: 51b66a6ce1 (PCI: spear: Add PCIe driver for ST Microelectronics SPEAr13xx)
Reported-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-20 12:27:29 -07:00
Olof Johansson f57c0e049a Samsung cleanup for v3.17
: Most of them are for exynos SoCs, remove useless
 codes and update for PMU consolidation.
 
 - remove unnecessary header file in mach-exynos/pmu.c
 - remove unused code in mach-exynos/common.h
 - remove mach-exynos/regs-pmu.h dependency from PD
 - remove file path from comment section in mach-exynos
 
 - move SYSREG definitions into mach-exynos/regs-sys.h
 
 - add mapping PMU base address via DT for PMU cleanup
 
 - use staic in mach-exynos/common.h
 - update Samsung UART config options for low-level debug
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJTybGdAAoJEA0Cl+kVi2xqwW4QAIgCaoe33s4qCUY1n1xZjLld
 DiLaolgeFyTMB7jekRgNhdCrdUXNPWRhp94dM3pzoiV8RAzXru86Xa86FbVkH6SZ
 sPShkL4auv+D+fQ1bso0EyB2GPGm5m8IJ7ZrPwgVUItX7TUnfIsvNsOsg7iY9gcw
 dMe8fb+oFieVlutX3ITL6thtmrJxCgM67Yyt/WY4HrShtR9dNi1soTUYBmQLznD/
 zqf58657eTVc8M0eiA9mkFSQJ1N5C670fyZN6CcQoKXIGvf5oh4ba6CUKkSQBM9Y
 UY7jksM/nXujyj0N2tIKNKFrkhBGhH99Rtp66R93tV7FCM9rgbsYwWwJCr6rqAVk
 u9NQFF2pbvRsgkw18coV9yxVyafLYlVdfGUzl2yq7u9SR3wmPcjROERer0h5UueR
 0mEq5v6eok2EZ29Tn2vU2Io0RShFbxLGNQC2/cs3PS+Un7xla5VOmwFjtKlWWtVA
 LHTbdGthjSGxH0SXOfXQD2pubkXLLEU7AekpOC+i14o97g9B235mHIP/m+X7a3F7
 cVCza9yRtKA1ztkdgq3vC29n09+4hU1qGVsQN8btM8ItqpGqLbb8qUj6wLGfhOXb
 UfYBo5RrIb1neAhKapaaB5Nus/9AQrkkYwVPiO+pWZ1KrIvRSLEjFjjrc4pJw+QS
 SQdAhJJQ0k6H82lQAu9A
 =goDG
 -----END PGP SIGNATURE-----

Merge tag 'samsung-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup

Merge "Samsung cleanup for v3.17" from Kukjin Kim:

Most of them are for exynos SoCs, remove useless codes and update for
PMU consolidation.

- remove unnecessary header file in mach-exynos/pmu.c
- remove unused code in mach-exynos/common.h
- remove mach-exynos/regs-pmu.h dependency from PD
- remove file path from comment section in mach-exynos

- move SYSREG definitions into mach-exynos/regs-sys.h

- add mapping PMU base address via DT for PMU cleanup

- use staic in mach-exynos/common.h
- update Samsung UART config options for low-level debug

* tag 'samsung-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: EXYNOS: Add support for mapping PMU base address via DT
  ARM: EXYNOS: Remove "linux/bug.h" from pmu.c
  ARM: EXYNOS: Remove regs-pmu.h header dependency from pm_domain
  ARM: EXYNOS: Remove file path from comment section
  ARM: EXYNOS: Move SYSREG definition into sys-reg specific file
  ARM: EXYNOS: Make exynos machine_ops as static
  ARM: EXYNOS: Remove unused code in common.h
  ARM: debug: Update Samsung UART config options
  + Linux 3.16-rc5

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19 15:01:08 -07:00
Olof Johansson b776eec135 ARM: tegra: rework PCIe regulators
This branch reworks the set of regulators that the Tegra PCIe driver
 uses, so that the driver and DT bindings more correctly model what's
 really going on in HW. For backwards-compatibility the driver will
 fallback to using the old set of regulators if the new ones can't be
 found.
 
 I've made this a separate branch in case it needs to be pulled into the
 PCIe tree to resolve any conflicts.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJTyRXmAAoJEN0jrNd/PrOhpcIP/1bhFxw7a0HjG1Cwtj27uJKo
 2S9z28sFbVERmOTy4Sfy/bf3EEBNZajgYJ0kOIJbrVRkpGV6BU/3nNVmqR9G1jOY
 9wVr7e9Z0lWQ8r8e9jXIRpTOO1PUFfx3AhyjD1kT5bUsI8m5dcDmryyLqsvh2UDn
 F1S2JpAeylVSFzZLspqnuc1HgG6V4xMxt7JCKQqQo4uTTs2LVWpLWRqQEOhpsmVW
 WDSzovSXBThm4wXvZlrTij7HuOqYbwG3wLpzJMVVfhysRZDfIO8i7hK2kAQ8+3O6
 0yS8HsfzrjhGvNgbGUt+hGTYg+omHp3i0RJf/AxhOIOrA5fIs4pOTC2HSqq+kG4x
 K2OWCUboaTbMpJ/+TwcY83Ohk/r+Qj3Ay9loyIbQ5e2ORbkmpvbBALiQLTFwswaf
 zPsuwSXW8imVnPsduo+7qnvq2sbQ45Wy30wZMPRKYSfQzNY40AK0hzvRtW1BfMHY
 3P35z+9uIygiOr4KlwvbnTjL/nNWa5aVO8CYDfAxDa81SUJn/4vGkJNLNw6z1zo8
 Jvem210R6G0dca257NFWZ9w7hB9bfX3AVR8ZovDkg7tiOOlaOwq8HJrVU8oM3dtu
 /ztRVYKo/XqRtKyCcUnCtoF6CswlhfT4u4JOmo/5KwD9VBmxQPWHEkUwMl9j6eu3
 5dNKF79ROlQ1Idk0jjDZ
 =48cL
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.17-pcie-regulators' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

Merge "ARM: tegra: rework PCIe regulators" from Thierry Reding:

This branch reworks the set of regulators that the Tegra PCIe driver
uses, so that the driver and DT bindings more correctly model what's
really going on in HW. For backwards-compatibility the driver will
fallback to using the old set of regulators if the new ones can't be
found.

I've made this a separate branch in case it needs to be pulled into the
PCIe tree to resolve any conflicts.

* tag 'tegra-for-3.17-pcie-regulators' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Remove legacy PCIe power supply properties
  PCI: tegra: Remove deprecated power supply properties
  PCI: tegra: Implement accurate power supply scheme
  ARM: tegra: Add new PCIe regulator properties
  PCI: tegra: Overhaul regulator usage

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19 12:35:45 -07:00
Thierry Reding 077fb1580d PCI: tegra: Implement accurate power supply scheme
The current description of power supplies doesn't match the hardware.
Instead it's designed to support the needs of current designs, which
will break as soon as a new design appears that cannot be described
using the current assumptions.

In order to fully support all possible future designs, all power supply
inputs to the PCIe block need to be accurately described and separately
configurable.

Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-07-18 11:20:03 +02:00
Thierry Reding 7232398abc ARM: tegra: Convert PMC to a driver
This commit converts the PMC support code to a platform driver. Because
the boot process needs to call into this driver very early, also set up
a minimal environment via an early initcall.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 14:58:43 +02:00
Thierry Reding 306a7f9139 ARM: tegra: Move includes to include/soc/tegra
In order to not clutter the include/linux directory with SoC specific
headers, move the Tegra-specific headers out into a separate directory.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 13:26:47 +02:00
Bjorn Helgaas 792688fde4 Merge branches 'pci/host-generic', 'pci/host-mvebu', 'pci/host-rcar', 'pci/host-tegra', 'pci/msi', 'pci/misc', 'pci/resource' and 'pci/virtualization' into next
* pci/host-generic:
  PCI: generic: Fix GPL v2 license string typo

* pci/host-mvebu:
  PCI: mvebu: Fix GPL v2 license string typo

* pci/host-rcar:
  PCI: rcar: Fix GPL v2 license string typo

* pci/host-tegra:
  PCI: tegra: Fix GPL v2 license string typo

* pci/msi:
  PCI/MSI: Use irq_get_msi_desc() to simplify code
  PCI/MSI: Remove unused list access in __pci_restore_msix_state()
  PCI/MSI: Retrieve first MSI IRQ from msi_desc rather than pci_dev
  PCI/MSI: Remove unused function msi_remove_pci_irq_vectors()
  PCI/MSI: Add msi_setup_entry() to clean up MSI initialization

* pci/misc:
  PCI: Configure ASPM when enabling device
  x86: don't exclude low BIOS area when allocating address space for non-PCI cards
  PCI: Add include guard to include/linux/pci_ids.h
  x86, ia64: Move EFI_FB vga_default_device() initialization to pci_vga_fixup()

* pci/resource:
  PCI: Tidy resource assignment messages
  PCI: Return conventional error values from pci_revert_fw_address()
  PCI: Cleanup control flow
  PCI: Support BAR sizes up to 128GB
  PCI: Keep original resource if we fail to expand it

* pci/virtualization:
  powerpc/pci: Remove duplicate logic
  PCI: Make resetting secondary bus logic common
2014-07-16 17:09:47 -06:00
Yijing Wang e11ece5a5e PCI/MSI: Use irq_get_msi_desc() to simplify code
Use irq_get_msi_desc() to get MSI IRQ related msi_desc directly instead of
searching the dev->msi_list.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-16 14:49:02 -06:00
Yijing Wang 0dae508aac PCI/MSI: Remove unused list access in __pci_restore_msix_state()
In __pci_restore_msix_state(), we get the first element from msi_list, but
we never use it.  Remove this useless code.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-16 14:45:38 -06:00
Yijing Wang a281b788d6 PCI/MSI: Retrieve first MSI IRQ from msi_desc rather than pci_dev
Retrieve the first MSI IRQ to compute the MSI index from struct msi_desc
rather than the struct pci_dev to avoid an additional memory access.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-16 14:44:49 -06:00
Yijing Wang 4cc901613b PCI/MSI: Remove unused function msi_remove_pci_irq_vectors()
msi_remove_pci_irq_vectors() is unused, so remove it.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-16 14:44:20 -06:00
Yijing Wang d873b4d449 PCI/MSI: Add msi_setup_entry() to clean up MSI initialization
Move MSI entry stuff to a new function, msi_setup_entry(), to simplify
msi_capability_init() as MSI-X does.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-16 14:42:07 -06:00
Vidya Sagar 1f6ae47ecf PCI: Configure ASPM when enabling device
We can't do ASPM configuration at enumeration-time because enabling it
makes some defective hardware unresponsive, even if ASPM is disabled later
(see 41cd766b06 ("PCI: Don't enable aspm before drivers have had a chance
to veto it").  Therefore, we have to do it after a driver claims the
device.

We previously configured ASPM in pci_set_power_state(), but that's not a
very good place because it's not really related to setting the PCI device
power state, and doing it there means:

  - We incorrectly skipped ASPM config when setting a device that's
    already in D0 to D0.

  - We unnecessarily configured ASPM when setting a device to a low-power
    state (the ASPM feature only applies when the device is in D0).

  - We unnecessarily configured ASPM when called from a .resume() method
    (ASPM configuration needs to be restored during resume, but
    pci_restore_pcie_state() should already do this).

Move ASPM configuration from pci_set_power_state() to
do_pci_enable_device() so we do it when a driver enables a device.

[bhelgaas: changelog]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=79621
Fixes: db288c9c5f ("PCI / PM: restore the original behavior of pci_set_power_state()")
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Vidya Sagar <sagar.tv@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v3.6+
2014-07-16 14:27:31 -06:00
Rafael J. Wysocki ba574dc856 ACPI / hotplug: Simplify acpi_set_hp_context()
Since all of the acpi_set_hp_context() callers pass at least one NULL
function pointer and one caller passes NULL function pointers only
to it, drop function pointer arguments from acpi_set_hp_context()
and make the callers initialize the function pointers in struct
acpi_hotplug_context by themselves before passing it to
acpi_set_hp_context().

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-16 01:45:40 +02:00
Rafael J. Wysocki 86f5f3ca49 ACPI / hotplug / PCI: Eliminate acpiphp_dev_to_bridge()
Since acpiphp_dev_to_bridge() is only called by
acpiphp_check_host_bridge(), move the code from it to that function
directly which reduces the call chain depth and makes the code
slightly easier to follow.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-16 01:45:21 +02:00
Bjorn Helgaas eed6542dd5 PCI: generic: Fix GPL v2 license string typo
Per license_is_gpl_compatible(), the MODULE_LICENSE() string for GPL v2 is
"GPL v2", not "GPLv2".  Use "GPL v2" so this module doesn't taint the
kernel.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Will Deacon <will.deacon@arm.com>
2014-07-15 15:07:46 -06:00
Bjorn Helgaas 68947eb175 PCI: rcar: Fix GPL v2 license string typo
Per license_is_gpl_compatible(), the MODULE_LICENSE() string for GPL v2 is
"GPL v2", not "GPLv2".  Use "GPL v2" so this module doesn't taint the
kernel.

Based-on-work-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-15 15:06:12 -06:00
Thierry Reding d975cb5703 PCI: tegra: Fix GPL v2 license string typo
Per license_is_gpl_compatible(), the MODULE_LICENSE() string for GPL v2 is
"GPL v2", not "GPLv2".  Use "GPL v2" so this module doesn't taint the
kernel.

[bhelgaas: changelog]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
2014-07-15 15:02:49 -06:00
Thierry Reding 505d8655f7 PCI: mvebu: Fix GPL v2 license string typo
Per license_is_gpl_compatible(), the MODULE_LICENSE() string for GPL v2 is
"GPL v2", not "GPLv2".  Use "GPL v2" so this module doesn't taint the
kernel.

[bhelgaas: changelog]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-07-15 15:01:05 -06:00
Pratyush Anand 51b66a6ce1 PCI: spear: Add PCIe driver for ST Microelectronics SPEAr13xx
ARM based ST Microelectronics's SPEAr1310 and SPEAr1340 SOCs have onchip
designware PCIe controller. To make that usable, this patch adds a wrapper
driver based on existing designware driver.

Adds bindings for this new driver and update MAINTAINERS as well.

Cc: linux-pci@vger.kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Mohit Kumar <mohit.kumar@st.com>
[viresh: fixed logs/cclist/checkpatch warnings, broken into smaller patches]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2014-07-14 10:30:39 +05:30
Greg Kroah-Hartman 9f48c89862 Merge 3.16-rc5 into char-misc-next
This resolves a number of merge issues with changes in this tree and
Linus's tree at the same time.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-13 15:26:47 -07:00
Bjorn Helgaas 1d0df48692 Merge branches 'pci/host-rcar', 'pci/hotplug', 'pci/iommu', 'pci/misc' and 'pci/msi' into next
* pci/host-rcar:
  PCI: rcar: Remove rcar_pcie_setup_window() resource argument
  PCI: rcar: Cleanup style and formatting
  PCI: rcar: Use correct initial HW settings
  PCI: rcar: Remove redundant config accessor register number checks

* pci/hotplug:
  PCI: cpqphp: Remove unnecessary null test before debugfs_remove()
  PCI: pciehp: Clear Data Link Layer State Changed during init
  PCI: pciehp: Remove struct controller.no_cmd_complete
  PCI: pciehp: Remove assumptions about which commands cause completion events
  PCI: pciehp: Compute timeout from hotplug command start time
  PCI: pciehp: Wait for hotplug command completion lazily
  PCI: pciehp: Make pcie_wait_cmd() self-contained
  PCI: Prevent NULL dereference during pciehp probe

* pci/iommu:
  PCI: Add bridge DMA alias quirk for Intel 82801 bridge

* pci/misc:
  ACPI / PCI: Fix sysfs acpi_index and label errors
  PCI/portdrv: Remove warning about invalid IRQ for hot-added PCIe ports

* pci/msi:
  PCI/MSI: Cache Multiple Message Capable in struct msi_desc
  PCI/MSI: Remove unused msi_enabled_mask()
  PCI/MSI: Add internal msix_clear_and_set_ctrl() function
2014-07-08 21:37:50 -06:00
Bjorn Helgaas 64da465e98 PCI: Tidy resource assignment messages
Print messages about failures in pci_assign_resource().  We can drop the
"by-hand" message from _pci_assign_resource() because %pR now prints the
size rather than the address if the resource hasn't been assigned.

No functional change.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-08 16:29:08 -06:00