Commit Graph

542 Commits

Author SHA1 Message Date
Tony Lindgren e709ed70d1 bus: ti-sysc: Fix missing reset delay handling
We have dts property for "ti,sysc-delay-us", and we're using it, but the
wait after OCP softreset only happens if devices are probed in legacy mode.

Let's add a delay after writing the OCP softreset when specified.

Fixes: e0db94fe87 ("bus: ti-sysc: Make OCP reset work for sysstatus and sysconfig reset bits")
Cc: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-12 08:20:10 -08:00
Tony Lindgren 93c60483b5 bus: ti-sysc: Fix missing force mstandby quirk handling
Commit 03856e928b ("bus: ti-sysc: Handle mstandby quirk and use it for
musb") added quirk handling for mstandby quirk but did not consider that
we also need a quirk variant for SYSC_QUIRK_FORCE_MSTANDBY.

We need to use forced idle mode for both SYSC_QUIRK_SWSUP_MSTANDBY and
SYSC_QUIRK_FORCE_MSTANDBY, but SYSC_QUIRK_SWSUP_MSTANDBY also need to
additionally also configure no-idle mode when enabled.

Fixes: 03856e928b ("bus: ti-sysc: Handle mstandby quirk and use it for musb")
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-10 07:18:21 -08:00
Olof Johansson 0f679edf5a Few ti-sysc related fixes for v5.5 merge window
Just few minor changes that can be merged when suitable, but would
 be good to have these in v5.5-rc1 to remove dependencies between branches
 for more changes later on in v5.6:
 
 - Add quirk handling for AESS (Audio Engine Sub System)
 
 - We want to drop the useless gptimer option for omap4 as there are local
   timers
 
 - A minor error path handling improvment for sysc_child_add_named_clock()
   that will make further patching a bit easier
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl3VgmMRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXOMhQ/+KJPQ0n0MUOOBZAE67u0/lxQLjljBWCWC
 ngvTm6Kcf9r+PgmRit0jgXNGbTq7CIuy3h46+dUDqcusn9YTfRfhyPnAr4YPq0o+
 RWwIILritkVmp0tNdiKhE2QXPB0pgNEM3KITzz1W0KqB+ZOqOYtgtc0ZTXO6QdZ6
 3TLNQGw613fFyfPRTlLsBzHrPUmf4oRY+P7qPWTemvgxtDouyR9E6gMKonr8KJRj
 c6jZGhoOfDmBgJR52vVeuCUea+hK5rJ8GghlDbIijxXPV3YdGLFp4AD0bBD973p0
 vIZMD3fU9VbvK/e2gjrfwykqwda8MNzMeXAS9GwkVOtTE9/4aSGhIN9Pw26a5pLS
 yy5MIkPCsekcCMp2Jsg5KEp9RRrVhJrzg1m9M9S8TCQ4cIk1R8+aieCVaQZMJyiH
 sl2/adC7XilTJFk76Iq5p4Vo50b8cdGQoGgAdHNkaFa2JVt8VFZ0ZcRcTgQc5irZ
 wIT/dp7DZiXu4Ap2tbM49Gc8Nk/RZ2/aHQnnrVsYyyWRnBLQEmILwwsYlYPjyyeO
 +369FQTM2H1CM68BkKOJv/AcvwERm5BOBCcp3+XN0ZWa6Tckw8wPQ1rghtxfESgl
 hrNMigT7UV6Dc9DlC3tqz++GfmPYs5ws1/qTmckczgRFthIDx9OTMZ+u73xF2XnM
 kYET/Yj4gzY=
 =Yb3M
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v5.5/ti-sysc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Few ti-sysc related fixes for v5.5 merge window

Just few minor changes that can be merged when suitable, but would
be good to have these in v5.5-rc1 to remove dependencies between branches
for more changes later on in v5.6:

- Add quirk handling for AESS (Audio Engine Sub System)

- We want to drop the useless gptimer option for omap4 as there are local
  timers

- A minor error path handling improvment for sysc_child_add_named_clock()
  that will make further patching a bit easier

* tag 'omap-for-v5.5/ti-sysc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Adjust exception handling in sysc_child_add_named_clock()
  ARM: OMAP2+: Drop useless gptimer option for omap4
  bus: ti-sysc: Add module enable quirk for audio AESS

Link: https://lore.kernel.org/r/pull-1574273726-31367@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-06 08:26:50 -08:00
Linus Torvalds ec939e4c94 ARM: SoC-related driver updates
Various driver updates for platforms:
 
  - A larger set of work on Tegra 2/3 around memory controller and
  regulator features, some fuse cleanups, etc..
 
  - MMP platform drivers, in particular for USB PHY, and other smaller
  additions.
 
  - Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
  and ASV (adaptive voltage), allowing the platform to run at more
  optimal operating points.
 
  - Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas
 
  - Clock/reset control driver for TI/OMAP
 
  - Meson-A1 reset controller support
 
  - Qualcomm sdm845 and sda845 SoC IDs for socinfo
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl3pORkPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3FK0P/0EG4lK+il7nE3pd9yIGUjlcYuumIjoxvyC9
 9ef202POJLIO3yMlsNyGFR+aOknFO/GtGvDkDFhTtlsGCL40tVzVsyo7ZQo+8mXD
 abr+H74NmRXImc+SISYR8X1CD6vEi3oi/no1y5dRzknlBikfsdSLKXJSMYBJ2A6t
 DNLwu0h1IZhPk7XQQsxaElG/a9HN8eueMdP20J1IlhOh0GiOwm+rbsLSZNbA/W9m
 53XhFs3Ag39SDE0BfXsS+XOWTE7FheZsZk2XQrOwYm9PnxjpIWH7FE2sYsk6uUIc
 Pa1b6wB5zlRnxvVHP0m3GXhbTUJDYDK3oybHffI4Mzd0cyZQHC92LhUXFrlTxkaf
 6kyhJOTdd5KMlZ2LS7jkwLqb30ieXBPKAREjdbRt6hpvu5P6G+bZQphTEeNAZC61
 XnX8mQ/XeoHdoGY5MvS8ht6a1qDF29ebA0/02seicThGK6tS9Qsju6Zo0sg9H1NH
 weK6jDuzLq5jpv/LB1apigrDSx+zddRzrwkwy85hR5aWOQhG0xjOoFBProbTS0to
 wR46zCEkbGZv4uc0gRuIdp0NR/lguqgDWPeoLluoTqmcpKS6N3RyxD0bWzlvgDFA
 fpYxVNKavHneWjfZ7U5RbYXD6jycJcuLaCOs16nrtUbMgJ9pqclLIaZXn7ZTRIuT
 RW6NgfZV
 =dk7w
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Olof Johansson:
 "Various driver updates for platforms:

   - A larger set of work on Tegra 2/3 around memory controller and
     regulator features, some fuse cleanups, etc..

   - MMP platform drivers, in particular for USB PHY, and other smaller
     additions.

   - Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
     and ASV (adaptive voltage), allowing the platform to run at more
     optimal operating points.

   - Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas

   - Clock/reset control driver for TI/OMAP

   - Meson-A1 reset controller support

   - Qualcomm sdm845 and sda845 SoC IDs for socinfo"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits)
  firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
  soc: fsl: add RCPM driver
  dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition
  memory: tegra: Consolidate registers definition into common header
  memory: tegra: Ensure timing control debug features are disabled
  memory: tegra: Introduce Tegra30 EMC driver
  memory: tegra: Do not handle error from wait_for_completion_timeout()
  memory: tegra: Increase handshake timeout on Tegra20
  memory: tegra: Print a brief info message about EMC timings
  memory: tegra: Pre-configure debug register on Tegra20
  memory: tegra: Include io.h instead of iopoll.h
  memory: tegra: Adapt for Tegra20 clock driver changes
  memory: tegra: Don't set EMC rate to maximum on probe for Tegra20
  memory: tegra: Add gr2d and gr3d to DRM IOMMU group
  memory: tegra: Set DMA mask based on supported address bits
  soc: at91: Add Atmel SFR SN (Serial Number) support
  memory: atmel-ebi: switch to SPDX license identifiers
  memory: atmel-ebi: move NUM_CS definition inside EBI driver
  soc: mediatek: Refactor bus protection control
  soc: mediatek: Refactor sram control
  ...
2019-12-05 11:43:31 -08:00
Linus Torvalds 0dd09bc02c Staging / IIO patches for 5.5-rc1
Here is the big staging and iio set of patches for the 5.5-rc1 release.
 
 It's the usual huge collection of cleanup patches all over the
 drivers/staging/ area, along with a new staging driver, and a bunch of
 new IIO drivers as well.
 
 Full details are in the shortlog, but all of these have been in
 linux-next for a long time with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXd6lVQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylFnwCgyvZ62uUyQTRey0zvNTe3I4fY9L4AnAnrz3ZC
 U6ZA2+Uj3O6qhAr5frRu
 =uv8S
 -----END PGP SIGNATURE-----

Merge tag 'staging-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging / iio updates from Greg KH:
 "Here is the big staging and iio set of patches for the 5.5-rc1
  release.

  It's the usual huge collection of cleanup patches all over the
  drivers/staging/ area, along with a new staging driver, and a bunch of
  new IIO drivers as well.

  Full details are in the shortlog, but all of these have been in
  linux-next for a long time with no reported issues"

* tag 'staging-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (548 commits)
  staging: vchiq: Have vchiq_dump_* functions return an error code
  staging: vchiq: Refactor indentation in vchiq_dump_* functions
  staging: fwserial: Fix Kconfig indentation (seven spaces)
  staging: vchiq_dump: Replace min with min_t
  staging: vchiq: Fix block comment format in vchiq_dump()
  staging: octeon: indent with tabs instead of spaces
  staging: comedi: usbduxfast: usbduxfast_ai_cmdtest rounding error
  staging: most: core: remove sysfs attr remove_link
  staging: vc04: Fix Kconfig indentation
  staging: pi433: Fix Kconfig indentation
  staging: nvec: Fix Kconfig indentation
  staging: most: Fix Kconfig indentation
  staging: fwserial: Fix Kconfig indentation
  staging: fbtft: Fix Kconfig indentation
  fbtft: Drop OF dependency
  fbtft: Make use of device property API
  fbtft: Drop useless #ifdef CONFIG_OF and dead code
  fbtft: Describe function parameters in kernel-doc
  fbtft: Make sure string is NULL terminated
  staging: rtl8723bs: remove set but not used variable 'change', 'pos'
  ...
2019-11-27 10:57:52 -08:00
Markus Elfring cb6cfe2eae bus: ti-sysc: Adjust exception handling in sysc_child_add_named_clock()
Add a jump target so that a call of the function “clk_put”
can be better reused at the end of this function.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-11-14 09:07:03 -08:00
Tony Lindgren 020003f763 bus: ti-sysc: Add module enable quirk for audio AESS
We must set the autogating bit on enable for AESS (Audio Engine SubSystem)
when probed with ti-sysc interconnect target module driver. Otherwise it
won't idle properly.

Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-11-14 08:25:28 -08:00
Olof Johansson 13c1eff175 ARM64: hisi: SoC driver updates for 5.5
- check the LOGIC_PIO_INDIRECT region ops at registration instead of
   in the IO port accessors to optimise the lib/ligic_pio.c
 
 - add the hisi LPC driver to the build test for the other architectures
   except ALPHA, C6X, HEXAGON and PARISC as they do not define {read,write}sb
   by updating the hisi LPC Kconfig and adding a dummy PIO_INDIRECT_SIZE
 
 - clean the sparse complains of the hisi LPC driver
 
 - build logic_pio into a lib to avoid including in the vmlinux when not
   referenced
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdxlsEAAoJEAvIV27ZiWZcyDgQALKLwwaieN5SGV/hhpilSEdh
 rCJapgBBHFLHM9UpornXzOtUg1HVzgL1zJq0nFHX0QTaHV24axOSvETAbPW/ip6j
 pDu1soh8dRcK+izLgx/yswuqmwbAtgt0lXQWraBzBVJ/67IjUBQoE29mCZ/6i5fY
 t89f4FHAlrOtEjjEBcgN7K3pHbekltM2BeF62thtwdFain3cC/VJEGlKM+JK3uQ8
 T0GVv+gTxS4AfWxFvoTyXeIV3Vk396jBF2xPKisrOfJwjcjqVnEHXLdK6BPtkIl8
 Dh9JjPCx0CYHukQEHYBnv3BPMUkmeeGCKG4BVmdnbGZzp+OSeeBsj+9I/xPXtAFF
 uCbYEGeCivzseGnNTFWX8/eZ3ZvrawllalaxwrvyIz+NJ1c+UDpYBWLZC+p1KZgU
 Y1QlU3kecIdsXhwJSaehhFvZ0ZIIEMUm96L69SpX0mjZ7O79ccD4gYtWBFd5tyME
 R55vF/U2jJMUxYImKfaPh9jDBaGTNfNxxUdSgYxI5x64k5mJyEWz4EtbjTEAZznS
 lkYtQsC+59TdOtz12RlNIPFkwRJwtf9zATzPweOaJ0Jr4/DlbYE7tcPqYSfiM8A0
 X1RbRtqj1Uf//mqjiw8A7D8qlC2mtYYX0DKdDaSO16FlDRW00EYoEw5debp/vyYc
 G91g635uatkrbBFCSjQ8
 =9R8Z
 -----END PGP SIGNATURE-----

Merge tag 'hisi-drivers-for-5.5' of git://github.com/hisilicon/linux-hisi into arm/drivers

ARM64: hisi: SoC driver updates for 5.5

- check the LOGIC_PIO_INDIRECT region ops at registration instead of
  in the IO port accessors to optimise the lib/ligic_pio.c

- add the hisi LPC driver to the build test for the other architectures
  except ALPHA, C6X, HEXAGON and PARISC as they do not define {read,write}sb
  by updating the hisi LPC Kconfig and adding a dummy PIO_INDIRECT_SIZE

- clean the sparse complains of the hisi LPC driver

- build logic_pio into a lib to avoid including in the vmlinux when not
  referenced

* tag 'hisi-drivers-for-5.5' of git://github.com/hisilicon/linux-hisi:
  logic_pio: Build into a library
  bus: hisi_lpc: Expand build test coverage
  bus: hisi_lpc: Clean some types
  logic_pio: Define PIO_INDIRECT_SIZE for !CONFIG_INDIRECT_PIO
  lib: logic_pio: Enforce LOGIC_PIO_INDIRECT region ops are set at registration

Link: https://lore.kernel.org/r/5DC959B9.80301@hisilicon.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-11 13:09:36 -08:00
John Garry 3e5cd20d4e bus: hisi_lpc: Expand build test coverage
Currently the driver will only ever be built for ARM64 because it selects
CONFIG_INDIRECT_PIO, which itself depends on ARM64.

Expand build test coverage for the driver to other architectures by only
selecting CONFIG_INDIRECT_PIO for ARM64, when we really want it.

We don't include ALPHA, C6X, HEXAGON, and PARISC architectures as they
don't define {read, write}sb.

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-11-05 08:47:48 +08:00
John Garry 663accf187 bus: hisi_lpc: Clean some types
Sparse complains of these:
drivers/bus/hisi_lpc.c:82:38: warning: incorrect type in argument 1 (different address spaces)
drivers/bus/hisi_lpc.c:82:38:    expected void const volatile [noderef] <asn:2>*addr
drivers/bus/hisi_lpc.c:82:38:    got unsigned char *
drivers/bus/hisi_lpc.c:131:35: warning: incorrect type in argument 1 (different address spaces)
drivers/bus/hisi_lpc.c:131:35:    expected unsigned char *mbase
drivers/bus/hisi_lpc.c:131:35:    got void [noderef] <asn:2>*membase
drivers/bus/hisi_lpc.c:186:35: warning: incorrect type in argument 1 (different address spaces)
drivers/bus/hisi_lpc.c:186:35:    expected unsigned char *mbase
drivers/bus/hisi_lpc.c:186:35:    got void [noderef] <asn:2>*membase
drivers/bus/hisi_lpc.c:228:16: warning: cast to restricted __le32
drivers/bus/hisi_lpc.c:251:13: warning: incorrect type in assignment (different base types)
drivers/bus/hisi_lpc.c:251:13:    expected unsigned int [unsigned] [usertype] val
drivers/bus/hisi_lpc.c:251:13:    got restricted __le32 [usertype] <noident>

Clean them up.

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-11-05 08:47:21 +08:00
David S. Miller d31e95585c Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
The only slightly tricky merge conflict was the netdevsim because the
mutex locking fix overlapped a lot of driver reload reorganization.

The rest were (relatively) trivial in nature.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-02 13:54:56 -07:00
Greg Kroah-Hartman ebc8f4f603 Second set of IIO + counter new device support, features etc for the 5.5 cycle.
Note two merge commits in here, both for immutable branches based
 of 5.4-rc1.
 1. Ti eqep driver because of some file moves in precursor patches.
    I suspect no one else will pull this one.
 2. ab8500 refactor as changes in power supply, hwmon and mfd trees.
    This may come via numerous trees as well as IIO.
 
 Counter subsystem related
 * ti eqep
   - New device support with bindings.
   - Includes prior file move to reflect more general use of ti-pwmss.
 * Counter core
   - simplify count_read and count_write callbacks + document change.
   - fix a typo in docs.
 
 Various subsystems related
 * AB8500
   - ab8500_btemp driver converted to be an IIO consumer driver.
   - ab8500_charger driver converted to be an IIO consumer driver.
   - ab8500_fg fuel gauge driver converted to be an IIO consumer driver.
   - ab8500 hwmon driver converted to be an IIO consumer driver.
   - mfd bindings augmented with the adc channels to make the above work.
   - drop original mfd driver.
 
 New device support
 * ab8500
   - new ADC driver used by the above other subystems via the IIO consumer
     interface.
 * adux1020 photometric sensor
   - new driver and dt bindings.
 * fxos877cq
   - new driver for this simple(ish) IMU with DT bindings.
 * intel_mrfld_adc
   -  new driver for the ADC found on Intel Merrifield platforms.
 * ltc2983
   - new driver for this multi-sensor type temperature interface.
     Includes complex DT bindings.
 * max1027
   - support for 12 bit devices, max1227, max1229 and max1231 + add to trivial
     bindings.
 * st_lsm6dsx
   - support for the LSM6DS0 6 axis MEMs sensor.
     Note different from the LSM6DSO which the driver already supports *sigh*
   - support for the LSM6DSRX 6 axis MEMs sensor.
 
 Features and cleanups
 * ad7303
   - replace use of core mlock with a local lock with cleanly defined scope.
 * ad9834
   - add a check for devm_clk_get failing.
 * at91-sama5d2
   - tidy up a 0 as NULL warning.
 * bmp280
   - endian type tidy ups.
   - use bulk regulator ops for a small reduction in code.
   - use devm_add_action... to simplify error path handling.
 * exynos
   - drop stray semicolon.
   - use devm_platform_ioremap_resource to reduce boilerplate.
 * hx711
   - various tricks to improve the frequency of read out possible.
 * max1027
   - debugfs support.
   - make interrupts optional.
   - reset at probe to get clean state.
   - refactors to allow addition of new device support.
 * maxim thermocouple
   - drop an unneeded semicolon.
 * mb1232
   - yaml binding conversion.
 * mcp320x
   - tidy up an endian types in cast warning.
 * meson_saradc
   - use devm_platform_ioremap_resource to reduce boilerplate.
 * mpu3050
   - make a poison value explicity big endian to supress a warning.
 * pulsedlight v2
   - endian type tidy ups.
 * sgp30
   - drop an excess semicolon.
 * sps30
   - make truncation explicit with masking to clean up a warning.
 * st sensors
   - drop gpio include as none of these support gpios.
 * st_lsm6dsx
   - tidy up some alignment issues.
   - refactors to allow addition of new device support.
     * allow varients of irq related reg definitions.
     * avoid accessing active-low, open-drain regs if not provided.
     * allow varients of bdu/boot and reset regs.
     * allow for enabling or disabling wakeup sources through platform
       data (seems someone still uses this).
   - enable wake-up events for LSM6DS0
   - use the drdy mask to avoid some invalid samples during initial start
     of sensor.
   - Add support to trim the timestamp.
 * stm32_adc
   - kernel-doc fixes.
 * stm32_dac
   - power management support.
 * stmpe-adc
   - Fix endian type of local variable.
 * twl4030
   - use false / true instead of 0 / 1 for booleans.
 * xilinx-xadc
   - use devm_platform_ioremap_resouce to reduce boilerplate.
 * zpa2326
   - reorganise buffer handling setup to be more consistent.
 
 Fixes (mostly recent additions)
 * cpcap-adc
   - Fix mising IRQF_ONESHOT that would cause warnings to be printed.
 * st_lsm6dsx
   - Sanity check the read_fifo pointer is set.
   - use locked read and update functions to prevent some races.
   - avoid accessing enable_reg if not provided.
   - take a lock to prevent a race in updating the config.
   - kernel-doc fixes.
   - document wakeup-source property in dt binding.
   - fix lsm9ds1 gyro gain definitions.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl27PN8RHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FojRzA/4svFkyp9+08sZxYN3Z6enw6VwS+OxgVXx
 ikM+j6Wny/kv71yhALoU0SY/GzWnqpudz9SUKVUgXGhOZbG7mJLYx9Ahk1/g2zrI
 wHVwO+PZIxBHUtpewKmcB+uVpaCfXGH6Bu9XYtefnhB1LeGbgS1UQ8q0RbveIyZ6
 sI1cOY7rMr0Sfzf+MgPuZ5sceLDXUuLRgTCro0hHSo8IVG1+raE37UMbmlQ8EYVl
 8gEHoeBrjM4ky8SX+DRyDjxfdgK/am6jqJhOrgmq72+/ltaytz8RaTs/X17GTi6J
 Jii2ODxdfUoxyN0/C57/2iTuL/yXmsEm7nKNdc3VFyjDiUlBs/kSgXpXTX2g3q8m
 SVG0OYHPfJlkwWkSKF463hD5hZ29yBwUNKKyQPwGD4x8+hs8xcw7Zx+KUu/PRkjW
 iZmiQksbJUgU1n8IMINz0NeHCbtI1psfMv+ZnNKwxlPWczYducLNfYPJbhdjuUpT
 Mi5r1An4xpSrlKgwr3JLsXetJLNxvCxbqQQq9kMZW2CF+tBuLhUJMd/7KDrfUQ/P
 wyWJ5TxlVA05ZwsuIWW+gCsQuXTDb6w2y0s9YxjiAUpRP3VAUZhZVWG5VWyxxfr/
 zCx+GT7NSPh70ActiUWrHOyB6zzGeIo8SVX43e7sxdmNkyPK2/d+24u/GOVBP7hg
 hGQ9Ra8JoA==
 =zfsO
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.5b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Second set of IIO + counter new device support, features etc for the 5.5 cycle.

Note two merge commits in here, both for immutable branches based
of 5.4-rc1.
1. Ti eqep driver because of some file moves in precursor patches.
   I suspect no one else will pull this one.
2. ab8500 refactor as changes in power supply, hwmon and mfd trees.
   This may come via numerous trees as well as IIO.

Counter subsystem related
* ti eqep
  - New device support with bindings.
  - Includes prior file move to reflect more general use of ti-pwmss.
* Counter core
  - simplify count_read and count_write callbacks + document change.
  - fix a typo in docs.

Various subsystems related
* AB8500
  - ab8500_btemp driver converted to be an IIO consumer driver.
  - ab8500_charger driver converted to be an IIO consumer driver.
  - ab8500_fg fuel gauge driver converted to be an IIO consumer driver.
  - ab8500 hwmon driver converted to be an IIO consumer driver.
  - mfd bindings augmented with the adc channels to make the above work.
  - drop original mfd driver.

New device support
* ab8500
  - new ADC driver used by the above other subystems via the IIO consumer
    interface.
* adux1020 photometric sensor
  - new driver and dt bindings.
* fxos877cq
  - new driver for this simple(ish) IMU with DT bindings.
* intel_mrfld_adc
  -  new driver for the ADC found on Intel Merrifield platforms.
* ltc2983
  - new driver for this multi-sensor type temperature interface.
    Includes complex DT bindings.
* max1027
  - support for 12 bit devices, max1227, max1229 and max1231 + add to trivial
    bindings.
* st_lsm6dsx
  - support for the LSM6DS0 6 axis MEMs sensor.
    Note different from the LSM6DSO which the driver already supports *sigh*
  - support for the LSM6DSRX 6 axis MEMs sensor.

Features and cleanups
* ad7303
  - replace use of core mlock with a local lock with cleanly defined scope.
* ad9834
  - add a check for devm_clk_get failing.
* at91-sama5d2
  - tidy up a 0 as NULL warning.
* bmp280
  - endian type tidy ups.
  - use bulk regulator ops for a small reduction in code.
  - use devm_add_action... to simplify error path handling.
* exynos
  - drop stray semicolon.
  - use devm_platform_ioremap_resource to reduce boilerplate.
* hx711
  - various tricks to improve the frequency of read out possible.
* max1027
  - debugfs support.
  - make interrupts optional.
  - reset at probe to get clean state.
  - refactors to allow addition of new device support.
* maxim thermocouple
  - drop an unneeded semicolon.
* mb1232
  - yaml binding conversion.
* mcp320x
  - tidy up an endian types in cast warning.
* meson_saradc
  - use devm_platform_ioremap_resource to reduce boilerplate.
* mpu3050
  - make a poison value explicity big endian to supress a warning.
* pulsedlight v2
  - endian type tidy ups.
* sgp30
  - drop an excess semicolon.
* sps30
  - make truncation explicit with masking to clean up a warning.
* st sensors
  - drop gpio include as none of these support gpios.
* st_lsm6dsx
  - tidy up some alignment issues.
  - refactors to allow addition of new device support.
    * allow varients of irq related reg definitions.
    * avoid accessing active-low, open-drain regs if not provided.
    * allow varients of bdu/boot and reset regs.
    * allow for enabling or disabling wakeup sources through platform
      data (seems someone still uses this).
  - enable wake-up events for LSM6DS0
  - use the drdy mask to avoid some invalid samples during initial start
    of sensor.
  - Add support to trim the timestamp.
* stm32_adc
  - kernel-doc fixes.
* stm32_dac
  - power management support.
* stmpe-adc
  - Fix endian type of local variable.
* twl4030
  - use false / true instead of 0 / 1 for booleans.
* xilinx-xadc
  - use devm_platform_ioremap_resouce to reduce boilerplate.
* zpa2326
  - reorganise buffer handling setup to be more consistent.

Fixes (mostly recent additions)
* cpcap-adc
  - Fix mising IRQF_ONESHOT that would cause warnings to be printed.
* st_lsm6dsx
  - Sanity check the read_fifo pointer is set.
  - use locked read and update functions to prevent some races.
  - avoid accessing enable_reg if not provided.
  - take a lock to prevent a race in updating the config.
  - kernel-doc fixes.
  - document wakeup-source property in dt binding.
  - fix lsm9ds1 gyro gain definitions.

* tag 'iio-for-5.5b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (73 commits)
  dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsrx device bindings
  iio: imu: st_lsm6dsx: add support to LSM6DSRX
  iio: st: Drop GPIO include
  iio: adc: hx711: optimize performance in read cycle
  iio: adc: stm32-adc: fix kernel-doc warnings
  iio: pressure: zpa2326: fix iio_triggered_buffer_postenable position
  iio: chemical: sgp30: drop excess semicolon
  iio: adc: twl4030: Use false / true instead of 0 / 1 with booleans
  dt-bindings: iio: Add ltc2983 documentation
  iio: temperature: Add support for LTC2983
  iio: pressure: bmp280: use devm action and remove labels from probe
  iio: pressure: bmp280: use bulk regulator ops
  iio: imu: Add support for the FXOS8700 IMU
  dt-bindings: iio: imu: add fxos8700 imu binding
  staging: iio: ad9834: add a check for devm_clk_get
  iio: adc: xilinx-xadc: use devm_platform_ioremap_resource
  iio: temp: maxim thermocouple: Drop unneeded semi colon.
  iio: adc: cpcap-adc: Fix missing IRQF_ONESHOT as only threaded handler.
  iio: adc: meson_saradc: use devm_platform_ioremap_resource
  iio: adc: exynos: use devm_platform_ioremap_resource
  ...
2019-11-01 10:06:10 +01:00
Ioana Ciornei 1ac210d128 bus: fsl-mc: add the fsl_mc_get_endpoint function
Using the newly added fsl_mc_get_endpoint function a fsl-mc driver can
find its associated endpoint (another object at the other link of a MC
firmware link).

The API will be used in the following patch in order to discover the
connected DPMAC object of a DPNI.

Also, the fsl_mc_device_lookup function is made available to the entire
fsl-mc bus driver and not just for the dprc driver.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31 14:19:45 -07:00
Ioana Ciornei 6fff8c0107 bus: fsl-mc: export device types present on the bus
Export all device types present on the fsl-mc bus in order to be able to
actually use the is_fsl_mc_bus_*() functions from drivers on the bus.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31 14:19:45 -07:00
Tony Lindgren 1819ef2e2d bus: ti-sysc: Use swsup quirks also for am335x musb
Also on am335x we need the swsup quirks for musb.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-21 14:15:55 -07:00
Tony Lindgren 03856e928b bus: ti-sysc: Handle mstandby quirk and use it for musb
We need swsup quirks for sidle and mstandby for musb to work
properly.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-21 13:36:09 -07:00
Tony Lindgren 96b4597f0e Merge branch 'watchdog-fix' into omap-for-v5.5/ti-sysc 2019-10-18 08:53:28 -07:00
Tony Lindgren c7d8669f46 bus: ti-sysc: Fix watchdog quirk handling
I noticed that when probed with ti-sysc, watchdog can trigger on am3, am4
and dra7 causing a device reset.

Turns out I made several mistakes implementing the watchdog quirk handling:

1. We must do both writes to spr register

2. We must also call the reset quirk on disable

3. On am3 and am4 we need to also set swsup quirk flag

I probably only tested this earlier with watchdog service running when the
watchdog never gets disabled.

Fixes: 4e23be473e ("bus: ti-sysc: Add support for module specific reset quirks")
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-18 08:45:32 -07:00
David Lechner f213729f67 counter: new TI eQEP driver
This adds a new counter driver for the Texas Instruments Enhanced
Quadrature Encoder Pulse (eQEP) module.

Only very basic functionality is currently implemented - only enough to
be able to read the position. The actual device has many more features
which can be added to the driver on an as-needed basis.

It is not possible to read the QEPA/B signal values in hardware, so
that feature is omitted.

The TI_PWMSS kernel option is selected in Kconfig to enable the parent
bus, which is needed for power management.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-10-17 21:53:49 +01:00
David Lechner 7cabf9251a bus/ti-pwmss: move TI PWMSS driver from PWM to bus subsystem
The TI PWMSS driver is a simple bus driver for providing power
power management for the PWM peripherals on TI AM33xx SoCs, namely
eCAP, eHRPWM and eQEP. The eQEP is a counter rather than a PWM, so
it does not make sense to have the bus driver in the PWM subsystem
since the PWMSS is not exclusive to PWM devices.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-10-17 21:17:42 +01:00
Tero Kristo cdc56c1129 bus: ti-sysc: avoid toggling power state of module during probe
Current implementation for ti-sysc powers down the module once module
init is complete. However, right after power is disabled, it is enabled
via runtime PM. This is unnecessary so avoid it by re-ordering the
events a bit; move powering down of the module post runtime PM enable
which makes sure the use counts are maintained properly and there is
no extra power down/up sequence for the module.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-08 07:08:59 -07:00
Tero Kristo df4f3459c7 bus: ti-sysc: drop the extra hardreset during init
There seems to be unnecessary extra hardreset line toggling applied
during module init. This is unnecessary, as the reset lines are already
asserted during boot, and it can cause certain modules to hang (iommus,
remoteprocs.) Remove the extra hardreset toggle, and remove the now
redundant function to handle this also.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-08 07:08:52 -07:00
Tero Kristo bf59ebbeac bus: ti-sysc: re-order reset and main clock controls
The main clocks and reset controls have a hardware level dependency,
where one can't transition state without the other one transitioning.
Because we don't have the dependency implemented in software, we must
ensure the ordering of these two is done properly; they way this is
handled is that clocks transition on software level without delay,
and the status is only polled on reset side. Because of this, we must
re-order the main clock and reset handling on the ti-sysc driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-08 07:08:46 -07:00
Linus Torvalds cef0aa0ce8 ARM: SoC fixes
A few fixes that have trickled in through the merge window:
 
  - Video fixes for OMAP due to panel-dpi driver removal
  - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7
  - Fixing arch version on ASpeed ast2500
  - Two fixes for reset handling on ARM SCMI
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl2Q+QsPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx36yIP/2eeqmdd97XJUiX2qGlKlDC+AtVUJnnxzhLa
 jSAIbbN74MCVH3M0BW1ECPbHHXFR54sffLFWwu8rVBr5nRdNPt0xLdXiVJcIVMfr
 by0LeMAOcw9CDxKsLqwwAagKq4HVnwqbZ+RVC3CjGz+Sp+vvSz+T/Ta6GzblASYv
 3zOs1FD+e4pwDqonyp6P5vAlBQ6qFL7AVZFPpNmXsqIzcT1bGEj/RwReErCIoevL
 7ZJr1R69D5IaEXYwWt8dT7bNwMR0gRvskrCQVCCBBcwHkO1PRd6cTXQ9EFBG8LgV
 LCM9F8Z+6QMigqvDFgSMpIz6orhKQKGpHF7K023c4DKBVqwigT/CaTOZgFr74pUJ
 Zp7s2dFcmJo1J2HlYDz3Nde4BFJXy3gNJphD7yI9xMfBNe1EXclvqtqICvnpMpgt
 thDXrReyDhMQukOBlrUcMxABP/EK97fULpC2Z2kaBq3SbnZILAOKFKtISmh5o6eI
 s4+QYETaqnWjYJE9d+YYg0VwNAifSzplSrGJVK43mGpqpQRx49cw25vL8bV/ZRgg
 HMTUX97Oho+EgDC9BWiahe0TZaWBBGJ3hWI/mrBW/dNowxoHp3l/fCcLdBPPKltS
 qo4BbbKPdrgq5o3YRBSjftdnbJ8eE9DTRs1sAsDQeNb9XJih9aiAQE3hxAA9wdJO
 vcRFcZ1Q
 =s4qF
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
 "A few fixes that have trickled in through the merge window:

   - Video fixes for OMAP due to panel-dpi driver removal

   - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7

   - Fixing arch version on ASpeed ast2500

   - Two fixes for reset handling on ARM SCMI"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: aspeed: ast2500 is ARMv6K
  reset: reset-scmi: add missing handle initialisation
  firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset
  bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
  ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
  ARM: dts: am3517-evm: Fix missing video
  ARM: dts: logicpd-torpedo-baseboard: Fix missing video
  ARM: omap2plus_defconfig: Fix missing video
  bus: ti-sysc: Fix handling of invalid clocks
  bus: ti-sysc: Fix clock handling for no-idle quirks
2019-09-30 10:04:28 -07:00
Olof Johansson 9bfd7319e8 Merge tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omap variants

Few fixes for ti-sysc interconnect target module driver for no-idle
quirks that caused nfsroot to fail on some dra7 boards.

And let's fixes to get LCD working again for logicpd board that got
broken a while back with removal of panel-dpi driver. We need to now
use generic CONFIG_DRM_PANEL_SIMPLE instead.

* tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
  ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
  ARM: dts: am3517-evm: Fix missing video
  ARM: dts: logicpd-torpedo-baseboard: Fix missing video
  ARM: omap2plus_defconfig: Fix missing video
  bus: ti-sysc: Fix handling of invalid clocks
  bus: ti-sysc: Fix clock handling for no-idle quirks

Link: https://lore.kernel.org/r/pull-1568819401-72461@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2019-09-29 11:20:48 -07:00
Linus Torvalds f97c81dc6c ARM: SoC: late updates for v5.4
This is some material that we picked up into our tree late or
 that had complex inter-depondencies. The fact that there are these
 interdependencies tends to meant that these are often actually the most
 interesting new additions:
 
 The new Aspeed AST2600 baseboard management controller is added, this
 is a Cortex-A7 based follow-up to the ARM11 based AST2500 and had some
 dependencies on other device drivers.
 
 After many years, support for the MMP2 based OLPC XO-1.75 finally makes
 it into the kernel.
 
 The Armada 3720 based Turris Mox open source router platform is a late
 addition and it follows some preparatory work across multiple branches.
 
 The OMAP2+ platform had some large-scale cleanup involving driver
 changes and DT changes, here we finish it off, dropping a lot of the
 now-unused platform data.
 
 The TI K3 platform that got added for 5.3 gains a lot more support
 for individual bits on the SoC, this part just came late for the
 merge window.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdf6P3AAoJEJpsee/mABjZMFUP/i/J9CNJjEec0cWCG1XgP/qh
 SpKFf2g9Y9QzqAzDDovo7atTGHTCG8C0fn8W+bkv9h7dWj2uxRtFISM9COomUoHa
 0qXUL9bbDB3LAvstLV451p4c67XsJUazV9KZPD7VsCquucWbDDYaGPz+0reSRm6y
 imK2jXqD0leG0CNbgRXfh64J32TF3M0/XnwbsNJreCmQvwUvkYLL5VNi/qcnvfyp
 k0g1/5OzH9mLertoVKWqJ9o1919Yvxdl6/eyDmTPmX08bs03WnPbCEzRVO/zkOKZ
 O6RcAlsjiLblQdfbDJKfbaYDDaE53d2NwdCvBIdSPmDoYM5eYjQC4PmDM0+0dmHe
 bFd9giBjzU2Uab7ylgeoVl6pX1ISk6bwmZxNup45cy0xyw8wuky02Wq2bQTuZbgI
 UcBlOGWR4aH/OCpNafn+ovDBYGc64I7EQobG7UiilrVq/libx1Uo7yjlWSxe4j8n
 wFchiB8It24WUiS4JhJFrTklkaf5JW3K3czdDATW7aZKjv+fnHU5GMre/hvNP4z7
 qROlP69/eqNXG25VOcwWPQE8yhP43+ZgyvoVwDh1H6VZdy9WxgYyEoiBAhFfcrng
 +RVAT4rzylPmKP8oygVF1fpTHTS8xHrYBbjkdRaj5KqmTDdqI/nMsYoq+E0R1ScV
 EsnyNVq7wnvH12zrOv+I
 =Qtkp
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC late updates from Arnd Bergmann:
 "This is some material that we picked up into our tree late or that had
  complex inter-depondencies. The fact that there are these
  interdependencies tends to meant that these are often actually the
  most interesting new additions:

   - The new Aspeed AST2600 baseboard management controller is added,
     this is a Cortex-A7 based follow-up to the ARM11 based AST2500 and
     had some dependencies on other device drivers.

   - After many years, support for the MMP2 based OLPC XO-1.75 finally
     makes it into the kernel.

   - The Armada 3720 based Turris Mox open source router platform is a
     late addition and it follows some preparatory work across multiple
     branches.

   - The OMAP2+ platform had some large-scale cleanup involving driver
     changes and DT changes, here we finish it off, dropping a lot of
     the now-unused platform data.

   - The TI K3 platform that got added for 5.3 gains a lot more support
     for individual bits on the SoC, this part just came late for the
     merge window"

[ This pull request itself wasn't actually sent late at all by Arnd, but
  I waited on the branches that it used to be pulled first, so it ends
  up being merged much later than the other ARM SoC pull requests this
  merge window     - Linus ]

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits)
  ARM: dts: dir685: Drop spi-cpol from the display
  ARM: dts: aspeed: Add AST2600 pinmux nodes
  ARM: dts: aspeed: Add AST2600 and EVB
  ARM: exynos: Enable support for ARM architected timers
  ARM: samsung: Fix system restart on S3C6410
  ARM: dts: mmp2: add OLPC XO 1.75 machine
  ARM: dts: mmp2: rename the USB PHY node
  ARM: dts: mmp2: specify reg-shift for the UARTs
  ARM: dts: mmp2: add camera interfaces
  ARM: dts: mmp2: fix the SPI nodes
  ARM: dts: mmp2: trivial whitespace fix
  arm64: dts: marvell: add DTS for Turris Mox
  dt-bindings: marvell: document Turris Mox compatible
  arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl
  arm64: dts: ti: k3-j721e-main: Fix gic-its node unit-address
  arm64: dts: ti: k3-am65-main: Fix gic-its node unit-address
  arm64: dts: ti: k3-j721e-main: Add hwspinlock node
  arm64: dts: ti: k3-am65-main: Add hwspinlock node
  arm64: dts: k3-j721e: Add gpio-keys on common processor board
  dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E
  ...
2019-09-20 15:53:02 -07:00
Linus Torvalds 399eb9b6cb ARM: SoC driver updates for v5.4
The branch contains driver changes that are tightly
 connected to SoC specific code. Aside from smaller
 cleanups and bug fixes, here is a list of the notable
 changes.
 
 New device drivers:
 
 - The Turris Mox router has a new "moxtet" bus driver
   for its on-board pluggable extension bus. The
   same platform also gains a firmware driver.
 
 - The Samsung Exynos family gains a new Chipid driver
   exporting using the soc device sysfs interface
 
 - A similar socinfo driver for Qualcomm Snapdragon
   chips.
 
 - A firmware driver for the NXP i.MX DSP IPC protocol
   using shared memory and a mailbox
 
 Other changes:
 
 - The i.MX reset controller driver now supports the
   NXP i.MX8MM chip
 
 - Amlogic SoC specific drivers gain support for
   the S905X3 and A311D chips
 
 - A rework of the TI Davinci framebuffer driver to
   allow important cleanups in the platform code
 
 - A couple of device drivers for removed ARM SoC
   platforms are removed. Most of the removals were
   picked up by other maintainers, this contains
   whatever was left.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdf6SUAAoJEJpsee/mABjZAfwP/01bXBOlGVusNH2zuh8IUSHb
 //5sTdWpwa2ugRekLOJUOjo2p9Fu70yH6xr4RUHI0rcRjZA0xR3bZPx45gI8LRHQ
 tfb25LaKqfgZjWMCJ8due1Lh7B6ffOQukryMtM/LoiCtqsy7b6aThEKaLpM9/Owl
 t53o4wKaVQJK5He9JQom9NOZidkl7tYLHmDQTOXhX2UEA/i45vtfjdsEBvoFPbTx
 +bYvlqs+SWlpDJk29j+oBOeKadPF+TFboLDiUCxH44MC3OsH51zjtKVBRTtbNMkb
 ek/ci5x9hCeHcYSEigNq2EMzEln09Yxyvjk8U/jLiJ1h1kz3p5MjqJbVMF1rYXpe
 ALuAwinM8Zv2o5/UOCkiQTWq79PtpOKHZKpNBXkaJ8kyqBLMSy8Fs3hCvXrDnjnQ
 TC8jX7UBqHRV2rbQIYehAQAxTvcRgTbqusQGLkUJInlux6go57LoMYHPABpHftJV
 kRdVeT0KzdCz1pvQwyekIog5hPLNTBi4jw6eQcOgeENvAea1MJa8lMMfKcVbIdS0
 ZVvxLl+K6noEKAv5lSeHAzjXq+cQFr3zDCsWy351mJETDHmE8zjsaHN1SgbRYLEk
 ZqzNwUYaPYBis38g85qaY/TSsJrWJ+jP8u7s9HTw3Oywg8SRy5vtW177s00/9VOd
 PYZ2UpqUeX8cdvggqUUU
 =lxFi
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "This contains driver changes that are tightly connected to SoC
  specific code. Aside from smaller cleanups and bug fixes, here is a
  list of the notable changes.

  New device drivers:

   - The Turris Mox router has a new "moxtet" bus driver for its
     on-board pluggable extension bus. The same platform also gains a
     firmware driver.

   - The Samsung Exynos family gains a new Chipid driver exporting using
     the soc device sysfs interface

   - A similar socinfo driver for Qualcomm Snapdragon chips.

   - A firmware driver for the NXP i.MX DSP IPC protocol using shared
     memory and a mailbox

  Other changes:

   - The i.MX reset controller driver now supports the NXP i.MX8MM chip

   - Amlogic SoC specific drivers gain support for the S905X3 and A311D
     chips

   - A rework of the TI Davinci framebuffer driver to allow important
     cleanups in the platform code

   - A couple of device drivers for removed ARM SoC platforms are
     removed. Most of the removals were picked up by other maintainers,
     this contains whatever was left"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
  bus: uniphier-system-bus: use devm_platform_ioremap_resource()
  soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access
  dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access
  firmware: ti_sci: Allow for device shared and exclusive requests
  bus: imx-weim: remove incorrect __init annotations
  fbdev: remove w90x900/nuc900 platform drivers
  spi: remove w90x900 driver
  net: remove w90p910-ether driver
  net: remove ks8695 driver
  firmware: turris-mox-rwtm: Add sysfs documentation
  firmware: Add Turris Mox rWTM firmware driver
  dt-bindings: firmware: Document cznic,turris-mox-rwtm binding
  bus: moxtet: fix unsigned comparison to less than zero
  bus: moxtet: remove set but not used variable 'dummy'
  ARM: scoop: Use the right include
  dt-bindings: power: add Amlogic Everything-Else power domains bindings
  soc: amlogic: Add support for Everything-Else power domains controller
  fbdev: da8xx: use resource management for dma
  fbdev: da8xx-fb: drop a redundant if
  fbdev: da8xx-fb: use devm_platform_ioremap_resource()
  ...
2019-09-16 15:52:38 -07:00
Tony Lindgren a4c8723a16 bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
Commit d098913a10 ("bus: ti-sysc: Fix clock handling for no-idle
quirks") fixed handling for no-idle quirk modules that are not enabled
by the bootloader.

But it also caused unpaired clockdomain calls that won't allow idling
the system. That's because clkdm_allow_idle_nolock() and
clkdm_deny_idle_nolock() have usage count with clkdm->forcewake_count.

Let's drop the unpaired sysc_clkdm_deny_idle() to fix idling of devices.

Fixes: d098913a10 ("bus: ti-sysc: Fix clock handling for no-idle quirks")
Cc: Keerthy <j-keerthy@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-06 12:57:46 -07:00
Tony Lindgren 2783d0638a bus: ti-sysc: Fix handling of invalid clocks
We can currently get "Unable to handle kernel paging request at
virtual address" for invalid clocks with dts node but no driver:

(__clk_get_hw) from [<c0138ebc>] (ti_sysc_find_one_clockdomain+0x18/0x34)
(ti_sysc_find_one_clockdomain) from [<c0138f0c>] (ti_sysc_clkdm_init+0x34/0xdc)
(ti_sysc_clkdm_init) from [<c0584660>] (sysc_probe+0xa50/0x10e8)
(sysc_probe) from [<c065c6ac>] (platform_drv_probe+0x58/0xa8)

Let's add IS_ERR checks to ti_sysc_clkdm_init() as And let's start treating
clk_get() with -ENOENT as a proper error. If the clock name is specified
in device tree we must succeed with clk_get() to continue. For modules with
no clock names specified in device tree we will just ignore the clocks.

Fixes: 2b2f7def05 ("bus: ti-sysc: Add support for missing clockdomain handling")
Acked-by: Roger Quadros <rogerq@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-05 13:01:29 -07:00
Masahiro Yamada ef92bfdaa7 bus: uniphier-system-bus: use devm_platform_ioremap_resource()
Replace the chain of platform_get_resource() and devm_ioremap_resource()
with devm_platform_ioremap_resource().

This allows to remove the local variable for (struct resource *), and
have one function call less.

Link: https://lore.kernel.org/r/20190905032122.26076-1-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-05 17:57:18 +02:00
Tony Lindgren d098913a10 bus: ti-sysc: Fix clock handling for no-idle quirks
NFSroot can fail on dra7 when cpsw is probed using ti-sysc interconnect
target module driver as reported by Keerthy.

Device clocks and the interconnect target module may or may not be
enabled by the bootloader on init, but we currently assume the clocks
and module are on from the bootloader for "ti,no-idle" and
"ti,no-idle-on-init" quirks as reported by Grygorii Strashko.

Let's fix the issue by always enabling clocks init, and
never disable them for "ti,no-idle" quirk. For "ti,no-idle-on-init"
quirk, we must decrement the usage count later on to allow PM
runtime to idle the module if requested.

Fixes: 1a5cd7c23c ("bus: ti-sysc: Enable all clocks directly during init to read revision")
Cc: Keerthy <j-keerthy@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Reported-by: Keerthy <j-keerthy@ti.com>
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-05 07:37:22 -07:00
Arnd Bergmann 3b1261fb72 bus: imx-weim: remove incorrect __init annotations
The probe function is no longer __init, so anything it calls now
must also be available at runtime, as Kbuild points out when building
with clang-9:

WARNING: vmlinux.o(.text+0x6e7040): Section mismatch in reference from the function weim_probe() to the function .init.text:imx_weim_gpr_setup()
The function weim_probe() references
the function __init imx_weim_gpr_setup().
This is often because weim_probe lacks a __init
annotation or the annotation of imx_weim_gpr_setup is wrong.

WARNING: vmlinux.o(.text+0x6e70f0): Section mismatch in reference from the function weim_probe() to the function .init.text:weim_timing_setup()
The function weim_probe() references
the function __init weim_timing_setup().
This is often because weim_probe lacks a __init
annotation or the annotation of weim_timing_setup is wrong.

Remove the remaining __init markings that are now wrong.

Fixes: 4a92f07816 ("bus: imx-weim: use module_platform_driver()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04 17:59:32 +02:00
Colin Ian King 6811d26df5 bus: moxtet: fix unsigned comparison to less than zero
Currently the size_t variable res is being checked for
an error failure however the unsigned variable is never
less than zero so this test is always false. Fix this by
making variable res ssize_t

Link: https://lore.kernel.org/r/20190822010351.15660-2-marek.behun@nic.cz
Addresses-Coverity: ("Unsigned compared against 0")
Fixes: 5bc7f990cd ("bus: Add support for Moxtet bus")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04 17:30:16 +02:00
Jason Yan caebdd3c11 bus: moxtet: remove set but not used variable 'dummy'
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/bus/moxtet.c: In function moxtet_remove:
drivers/bus/moxtet.c:822:6: warning: variable dummy set but not used
[-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20190822010351.15660-3-marek.behun@nic.cz
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04 17:30:10 +02:00
Arnd Bergmann 49826a68b5 mvebu dt64 for 5.4 (part 2)
Add support for Turris Mox board (Armada 3720 SoC based)
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXW5eNQAKCRALBhiOFHI7
 1aqnAJsGU/B3GFbhiuwI4+l3In7TMVVpIgCbB1T/eo1RJhvh9kH9zMj641Rmsk0=
 =B8dQ
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-dt64-5.4-2' of git://git.infradead.org/linux-mvebu into arm/late

mvebu dt64 for 5.4 (part 2)

Add support for Turris Mox board (Armada 3720 SoC based)

* tag 'mvebu-dt64-5.4-2' of git://git.infradead.org/linux-mvebu: (53 commits)
  arm64: dts: marvell: add DTS for Turris Mox
  dt-bindings: marvell: document Turris Mox compatible
  arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl
  arm64: dts: marvell: Add cpu clock node on Armada 7K/8K
  arm64: dts: marvell: Convert 7k/8k usb-phy properties to phy-supply
  arm64: dts: marvell: Add 7k/8k PHYs in PCIe nodes
  arm64: dts: marvell: Add 7k/8k PHYs in USB3 nodes
  arm64: dts: marvell: Add 7k/8k per-port PHYs in SATA nodes
  arm64: dts: marvell: Add CP110 COMPHY clocks
  arm64: dts: marvell: armada-37xx: add mailbox node
  dt-bindings: gpio: Document GPIOs via Moxtet bus
  drivers: gpio: Add support for GPIOs over Moxtet bus
  bus: moxtet: Add sysfs and debugfs documentation
  dt-bindings: bus: Document moxtet bus binding
  bus: Add support for Moxtet bus
  reset: Add support for resets provided by SCMI
  firmware: arm_scmi: Add RESET protocol in SCMI v2.0
  dt-bindings: arm: Extend SCMI to support new reset protocol
  firmware: arm_scmi: Make use SCMI v2.0 fastchannel for performance protocol
  firmware: arm_scmi: Add discovery of SCMI v2.0 performance fastchannels
  ...

Link: https://lore.kernel.org/r/87h85two0r.fsf@FE-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04 17:28:47 +02:00
Arnd Bergmann 30d8bb9003 more ti-sysc driver changes for omap variants for v5.4
Few changes mostly to deal with sgx SoC glue quirk for omap36xx that
 is needed for the related sgx SoC glue dts branch. The other changes
 are to simplify sysc_check_one_child() sysc_check_children() to be void
 functions, and detect d2d module when debugging is enabled.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl1kCukRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXNGSg//aGJnfbZAf98HNJMo/6rnY88pxf/smR9W
 YdIjP4DbqIq//W0VvfhI/QlnsGPcgBNn8ir6c3U8dyEAsYDl5HgOWqZHRClDlnBv
 ISGniT7oQBRleJheGzAOk8axbsF3T6cpIt9TjBl0I8GbSii7DIla80m+pI5FEUx7
 HspyxiN2yyvkhN47FzrVAOJvYGw7ceri0YkVqiMk7IqKNcw6jVXA0yqqfJNU+EqG
 4oFa+kt0RdkbxIsujWNYiN3r8RGET61lBb0nTFH39nu9VwDqNjiW69lNY+mvxL6F
 yohSKrKxrpaWPQ8FxUzqBECxUMSiN/iK12I3A+Jg+vvs7cjoLbHvQHj7KGPiCWH8
 qNek9KTpMnH06k2UbulWZ/8GCuzgBKIt+0fXzSovaVqzT/PrdjW9dN3AJ5H7ip/F
 EzkzJoxAF5PTaUAIxVsDfTpQGr/H2TXzSYpJc50iWTPTC7DIc7B0U+gNqN+TAIWN
 AEFoEk2U/e3Hyl+aFaqaY7+YoJOOkWz6qJk/5zXwNhl7b7qfrF6uhcfkQCqP6/ht
 cAPgz4FFiZINMPWnzt9srQxmC5gNj2i565t3NQ7gfv10XNGsxI0/6XhnmfOq8myE
 Pdzv6XlfZWFSz9TvQwFGoQzcGxxo94jtJ9rioPia5op1flx2cOZ09mzAZE/Bx5cL
 +ATlPBMxQjo=
 =UBeA
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v5.4/ti-sysc-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late

more ti-sysc driver changes for omap variants for v5.4

Few changes mostly to deal with sgx SoC glue quirk for omap36xx that
is needed for the related sgx SoC glue dts branch. The other changes
are to simplify sysc_check_one_child() sysc_check_children() to be void
functions, and detect d2d module when debugging is enabled.

* tag 'omap-for-v5.4/ti-sysc-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Detect d2d when debug is enabled
  bus: ti-sysc: Add module enable quirk for SGX on omap36xx
  bus: ti-sysc: Change return types of functions

Link: https://lore.kernel.org/r/pull-1567016893-318461@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04 17:20:41 +02:00
Arnd Bergmann bf3176b350 Driver changes for ti-sysc for v5.4
Few changes to prepare for using a reset driver for PRM rstctrl mostly
 to deal with the clocks for reset. Then few minor clean-up patches and
 SPDX license identifier changes, and add a MAINTAINERs file entry.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl1gZLgRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXNj5A/9F56FliHXmFRCsVw1vja5bgWagmOVnptx
 Xa0K29GanTx/cuTaUi5Cp+EPJSDYV2REp2J8jK9jfycEEm9ww3MovFCXJIYeUha3
 URMsyd9PctoQyfYdgqfTFs/4HE6NUjCFRjegZWN4K+A0vCx6x5xli7565QTrk0iL
 /Eok6oCA3tZkG3cBHn7ZNYahf0NNTlKhYe2Mq2TsJTgROymQ5I9SaCHPSIgdWuH3
 v0ysCyQnCNc9QLRLLdy2qnk1k5T/Mf04CMlUs8OIClm1d9cl0Wox83sQemaC5oLZ
 lpLBQYyuojob4rK2T2u4c6xNPrrDKltJufB0SyDuYBj30rCCPE/I3GwWZ9tjxcC0
 OHq8r+PTdGASyD0H5RfXkXRQARUDuQqt8DQR6lwSnhcCz8pUooDrhGY4+44ynbwg
 /tBfKrEr1PcFMnN28Htz+djSqzTB7GNa4XINV87SNmnKuEFQ/nE/CPW7/McVK7Dx
 WsRPC/ial+LhUio8dNNML9Ul2+xw46tTxiO0wvMI6nI6NgmDbQ1zOmBMFzN6ze8y
 naAJSCA1kP9zeYZ8y/YWio8TTRbdHZznX8nqNXQ6t/UGBMrxaWeHiOulKmz1YlwR
 cBHduWwgF6t/qB7qrxwqNddUKcRRIfJA//h0QwieQLdC5EZeq0cUbn4yHMchnCIx
 DuOc9DS0NKk=
 =RAgR
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v5.4/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late

Driver changes for ti-sysc for v5.4

Few changes to prepare for using a reset driver for PRM rstctrl mostly
to deal with the clocks for reset. Then few minor clean-up patches and
SPDX license identifier changes, and add a MAINTAINERs file entry.

* tag 'omap-for-v5.4/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: remove set but not used variable 'quirks'
  bus: ti-sysc: allow reset sharing across devices
  bus: ti-sysc: rework the reset handling
  bus: ti-sysc: re-order the clkdm control around reset handling
  bus: ti-sysc: Add missing kerneldoc comments
  bus: ti-sysc: Switch to SPDX license identifier
  dt-bindings: ti-sysc: Add SPDX license identifier
  MAINTAINERS: Add ti-sysc files under the OMAP2+ entry

Link: https://lore.kernel.org/r/pull-1566599057-142651@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04 17:20:04 +02:00
Arnd Bergmann bff00fdf03 i.MX drivers update for 5.4:
- A series from Anson Huang to add UID support for i.MX8 SoC and SCU
    drivers.
  - A series from Daniel Baluta to add DSP IPC driver for communication
    between host AP (Linux) and the firmware running on DSP embedded in
    i.MX8 SoCs.
  - A small fix for GPCv2 error code printing.
  - Switch from module_platform_driver_probe() to module_platform_driver()
    for imx-weim driver, as we need the driver to probe again when device
    is present later.
  - Add optional burst clock mode support for imx-weim driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdYoCEAAoJEFBXWFqHsHzOkDgH/jWNgp3QR3omPQGX80oM6/ga
 3x78GDJyQfzZKWyOJbWz12tzXWlD1fmGIZy7SeuvXlYUbNnE1WU6ARFGDoBpjbew
 DOYoPT9x7eJemSdnEE43g2vtspEzb6Afvb7dr78OPaik24eY0dFx90U0tzptmuVY
 gXxkAHo2ez6txXTu5Id9Z5Deitukb8NoK/9yyzTeD0oYn2hCooAp5fAl1rKgfLnf
 MpG29TCK8dxr/j7tzsbt2nutJJYy1Ybh/0WpOMXnBwdAz20JT7MU87DMil0//Q02
 0Es/P2xH7K4r3ca9mupDtXZps2DbnmYJorvxpfHuMXcyq0uxGhl1/zyhTv+LW4c=
 =5mGq
 -----END PGP SIGNATURE-----

Merge tag 'imx-drivers-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers

i.MX drivers update for 5.4:
 - A series from Anson Huang to add UID support for i.MX8 SoC and SCU
   drivers.
 - A series from Daniel Baluta to add DSP IPC driver for communication
   between host AP (Linux) and the firmware running on DSP embedded in
   i.MX8 SoCs.
 - A small fix for GPCv2 error code printing.
 - Switch from module_platform_driver_probe() to module_platform_driver()
   for imx-weim driver, as we need the driver to probe again when device
   is present later.
 - Add optional burst clock mode support for imx-weim driver.

* tag 'imx-drivers-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  soc: imx: gpcv2: Print the correct error code
  bus: imx-weim: use module_platform_driver()
  firmware: imx: Add DSP IPC protocol interface
  soc: imx-scu: Add SoC UID(unique identifier) support
  bus: imx-weim: optionally enable burst clock mode
  firmware: imx: scu-pd: Add IRQSTR_DSP PD range
  firmware: imx: scu-pd: Add mu13 b side PD range
  firmware: imx: scu-pd: Rename mu PD range to mu_a
  soc: imx8: Add i.MX8MM UID(unique identifier) support
  soc: imx8: Add i.MX8MQ UID(unique identifier) support

Link: https://lore.kernel.org/r/20190825153237.28829-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03 22:44:04 +02:00
Arnd Bergmann 2f7ce2aafa Allwinner drivers patches for 5.4
One driver to remove a redundant error message in the Allwinner RSB
 driver.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXV/5PwAKCRDj7w1vZxhR
 xUPDAQDCRzdhQef1Ki9OvNcT8o5tbxLK+YcWmmrlLAA4qe2TRQEA1/Um5ZS8s8p5
 MKz27KwMjt3PHVc9AoQiEzCHETKb1AA=
 =safB
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-drivers-for-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/drivers

Allwinner drivers patches for 5.4

One driver to remove a redundant error message in the Allwinner RSB
driver.

* tag 'sunxi-drivers-for-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  bus: sunxi-rsb: Remove dev_err() usage after platform_get_irq()

Link: https://lore.kernel.org/r/f9edfc8e-19b7-4b6e-897a-35f3bdcc8643.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03 22:16:34 +02:00
Arnd Bergmann 34614c30bf Hisilicon fixes for v5.3-rc
- Fixed RCU usage in logical PIO
 - Added a function to unregister a logical PIO range in logical PIO
   to support the fixes in the hisi-lpc driver
 - Fixed and optimized hisi-lpc driver to avoid potential use-after-free
   and driver unbind crash
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdVhtCAAoJEAvIV27ZiWZcP80P/0XIMAV5pFFXDuMNUciNg07v
 6E0GZbbEViY07D4XvwUcZx/b2nJzHi66H9kVTZ757QfsEiAQEyviG8NlYinwDUmD
 yOxdgg3g8BtNieahqEwUjewW7NwyERbrCNIhUYGsr2wC+4D0Fycj03mUgfKaziwv
 HWF3b7kXOGbZiUE4N/UogKzYsG+Pm8k+h33wjiagXctiZvu4w/FRhGcpS2fu0AZ3
 Oetp+2HPRwHM+eBQW8fLNlV9yV1tAODFKzVMv+JGHWpx+XJgzUwFSI1s/Q2ioN3k
 vEiXrmSaR1XT52yEe8qviV4NCD0XEtWeVmIMa8ZplsbmRzshTUcRPYO4nOJBiB6j
 tffPXv40AXI0vUwQnZ21NLbt+pfNWbxdMQV8rQWtmD4WmCg+7W11ARMCOA0eppAu
 GU8NXrNUO6+LU/w0snOLByEY+x3X9Vst5X0yIvS1uooEqtDK6RFGVy/KLAnWmPk5
 GracF2utVudo0SnzANywWmvI1xML1n7tgknunUpE8tbmogHiaNAJvI6xExh6aQqh
 bkBN5LBFWVHtGyCJbGGemC7ddADjaxjFxiErW4zayAlTWUs9EQNYTRfoV7oBEKff
 Zb1XiT3vfhYYje5FRZvV5pvuskWceQd9Pi5JsYm57NEcW2SAGe653ADMWIfsjOxe
 /eM48ilxlGbP2SYxSmoL
 =BnY2
 -----END PGP SIGNATURE-----

Merge tag 'hisi-fixes-for-5.3' of git://github.com/hisilicon/linux-hisi into arm/fixes

Hisilicon fixes for v5.3-rc

- Fixed RCU usage in logical PIO
- Added a function to unregister a logical PIO range in logical PIO
  to support the fixes in the hisi-lpc driver
- Fixed and optimized hisi-lpc driver to avoid potential use-after-free
  and driver unbind crash

* tag 'hisi-fixes-for-5.3' of git://github.com/hisilicon/linux-hisi:
  bus: hisi_lpc: Add .remove method to avoid driver unbind crash
  bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free
  lib: logic_pio: Add logic_pio_unregister_range()
  lib: logic_pio: Avoid possible overlap for unregistering regions
  lib: logic_pio: Fix RCU usage

Link: https://lore.kernel.org/r/5D562335.7000902@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-29 17:23:52 +02:00
Tony Lindgren 7edd00f71f bus: ti-sysc: Detect d2d when debug is enabled
We want to see what modules probe when debug is enabled.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-26 08:33:25 -07:00
Tony Lindgren d7f563db77 bus: ti-sysc: Add module enable quirk for SGX on omap36xx
Add module enable quirk for SGX needed on omap36xx.

Cc: Adam Ford <aford173@gmail.com>
Cc: Filip Matijević <filip.matijevic.pz@gmail.com>
Cc: "H. Nikolaus Schaller" <hns@goldelico.com>
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: moaz korena <moaz@korena.xyz>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Cc: Philipp Rossak <embed3d@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-26 08:33:24 -07:00
Nishka Dasgupta c6e78d7019 bus: ti-sysc: Change return types of functions
Change return type of functions sysc_check_one_child() and
sysc_check_children() from int to void as neither ever returns an error.
Modify call sites of both functions accordingly.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-26 08:33:23 -07:00
Sascha Hauer 4a92f07816 bus: imx-weim: use module_platform_driver()
Switch from module_platform_driver_probe() to module_platform_driver().
The former is not suitable for booting with device tree as the driver
will be registered before the device and thus won't be probed again
when the device is present.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19 14:07:23 +02:00
Ioana Ciornei eadf0b17b4 bus: fsl-mc: remove explicit device_link_del
Starting with commit 72175d4ea4 ("driver core: Make driver core own
stateful device links") stateful device links are owned by the driver
core and should not be explicitly removed on device unbind. Delete all
device_link_del appearances from the fsl-mc bus.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-By: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-16 14:17:35 -05:00
Marek Behún 5bc7f990cd bus: Add support for Moxtet bus
On the Turris Mox router different modules can be connected to the main
CPU board: currently a module with a SFP cage, a module with MiniPCIe
connector, a PCIe pass-through MiniPCIe connector module, a 4-port
switch module, an 8-port switch module, and a 4-port USB3 module.

For example:
  [CPU]-[PCIe-pass-through]-[PCIe]-[8-port switch]-[8-port switch]-[SFP]

Each of this modules has an input and output shift register, and these
are connected via SPI to the CPU board.

Via SPI we are able to discover which modules are connected, in which
order, and we can also read some information about the modules (eg.
their interrupt status), and configure them.
From each module 8 bits can be read (of which low 4 bits identify the
module) and 8 bits can be written.

For example from the module with a SFP cage we can read the LOS,
TX-FAULT and MOD-DEF0 signals, while we can write TX-DISABLE and
RATE-SELECT signals.

This driver creates a new bus type, called "moxtet". For each Mox module
it finds via SPI, it creates a new device on the moxtet bus so that
drivers can be written for them.

It also implements a virtual interrupt controller for the modules which
send their interrupt status over the SPI shift register. These modules
do this in addition to sending their interrupt status via the shared
interrupt line. When the shared interrupt is triggered, we read from the
shift register and handle IRQs for all devices which are in interrupt.

The topology of how Mox modules are connected can then be read by
listing /sys/bus/moxtet/devices.

Link: https://lore.kernel.org/r/20190812161118.21476-2-marek.behun@nic.cz
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-14 15:30:35 +02:00
YueHaibing c8a738f4cf bus: ti-sysc: remove set but not used variable 'quirks'
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/bus/ti-sysc.c: In function sysc_reset:
drivers/bus/ti-sysc.c:1452:50: warning: variable quirks set but not used [-Wunused-but-set-variable]

It is never used since commit e0db94fe87 ("bus: ti-sysc: Make
OCP reset work for sysstatus and sysconfig reset bits")

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13 04:40:11 -07:00
Tero Kristo bb88b86c1f bus: ti-sysc: allow reset sharing across devices
Some devices need to share their reset signals, like DSP MMUs, thus drop
the exclusive notation from reset request. Also, balance the init time
reset count, otherwise the resets will never be applied post boot.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13 04:32:15 -07:00
Tero Kristo 4345f0dc01 bus: ti-sysc: rework the reset handling
If reset controllers are assigned to the ti-sysc target-module, only
ti-sysc is going to be able to control these. Thus, remove all the
disable_on_idle flag usage, and assert/de-assert the reset always
in the idle path. Otherwise the reset signal will always just be
de-asserted.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13 04:32:09 -07:00
Tero Kristo b603631443 bus: ti-sysc: re-order the clkdm control around reset handling
Parenting clockdomain for the IP should be enabled during the reset
handling logic, otherwise the reset may not finish properly. Re-order
the clockdomain control logic to avoid this.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13 04:32:03 -07:00