On Mon, Jan 19, 2009 at 10:12:24AM -0800, Randy Dunlap (randy.dunlap@oracle.com) wrote:
>
> DST build fails when CONFIG_BLOCK=n:
DST should depend on block and block device, in the original patch its
kconfig entry was in the BLK_DEV menu, so this dependency was satisfied
automatically. Should attached patch be pushed into drivers/staging?
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Do not allow empty barriers or generic_make_request() -> scsi_setup_fs_cmnd()
will explode
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Added thread pool exit condition into the thread_pool_del_worker(). If
called in parallel another thread can steal
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use bio prepend feature as suggested by Jens Axboe.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
bus_id is going away, use the dev_set_name() function instead.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
DST may fully encrypt the data channel in case of untrusted channel and implement
strong checksum of the transferred data. It is possible to configure algorithms
and crypto keys, they should match on both sides of the network channel.
Crypto processing does not introduce noticeble performance overhead, since DST
uses configurable pool of threads to perform crypto processing.
This patch introduces crypto processing helpers and crypto engine initialization:
glueing with the crypto layer, allocation and initialization of the crypto
processing thread pool, allocation of the cached pages, which are used to temporary
encrypt data into, since it is forbidden to encrypt data in-place, since pages
are used by the higher layers.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
DST uses transaction model, when each store has to be explicitly acked
from the remote node to be considered as successfully written. There
may be lots of in-flight transactions. When remote host does not ack
the transaction it will be resent predefined number of times with specified
timeouts between them. All those parameters are configurable. Transactions
are marked as failed after all resends completed unsuccessfully, having
long enough resend timeout and/or large number of resends allows not to
return error to the higher (FS usually) layer in case of short network
problems or remote node outages. In case of network RAID setup this means
that storage will not degrade until transactions are marked as failed, and
thus will not force checksum recalculation and data rebuild. In case of
connection failure DST will try to reconnect to the remote node automatically.
DST sends ping commands at idle time to detect if remote node is alive.
Because of transactional model it is possible to use zero-copy sending
without worry of data corruption (which in turn could be detected by the
strong checksums though).
Transactions are handled in this patch: allocation/freeing/completion,
scanning for stall and to-be-resent transactions and overall management
of the storing tree.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kernel currently does not allow to queue work into some entity which
will perform it in the process context and have simple way to extend
number of worker and work with them not as separate objects, but with
pool as a whole. So thread pool model was implemented in the DST.
Thread pool abstraction allows to schedule a work to be performed
on behalf of kernel thread. One does not operate with threads itself,
instead user provides setup and cleanup callbacks for thread pool itself,
and action and cleanup callbacks for each submitted work.
Each worker has private data initialized at creation time and data,
provided by user at scheduling time.
When action is being performed, thread can not be used by other users,
instead they will sleep until there is free thread to pick their work.
Thread pool is used for crypto processing of incoming and outgoing IO
requests to reduce the overall overhead.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch introduces remote (export) node machinery: initialization
address/port (and other socket parameters), export block device (can be
another DST storage for example or local device like /dev/sda1), local
IO processing engine (BIO state machines, receiving/submitting logic).
Network management for the export node like accepting new client, scheduling
its command processing thread, receiving/sending IO requests, all are placed
here.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Each DST device contains of two nodes: local and remote (called also as export node).
This patch contains local node processing engine: network state storage,
socket processing loops and state machine, socket polling machinery, reconnection
logic, send/receive basic helpers, related IO commands and so on.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch contains DST core files, which introduce
block layer, connector and sysfs registration glue and main headers.
Connector is used for the configuration of the node (its type, address,
device name and so on). Sysfs provides bits of information about running
devices in the following format:
+/*
+ * DST sysfs tree for device called 'storage':
+ *
+ * /sys/bus/dst/devices/storage/
+ * /sys/bus/dst/devices/storage/type : 192.168.4.80:1025
+ * /sys/bus/dst/devices/storage/size : 800
+ * /sys/bus/dst/devices/storage/name : storage
+ */
DST header contains structure definitions and protocol command description.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replacing the use of kernel_thread() with kthread_run(). But as
kthread_run() returned a task structure, as compared with
kernel_thread() returning a PID, it was found to be more efficient to
store the task structure pointer as a field data instead of PID
pointer. On top of modifying the field to store task structure
pointer, the initialization of the field (assigned to
THREAD_PID_INIT_VALUE) was also found unnecessary - as no where it is
found to be used.
Signed-off-by: Peter Teoh <htmldeveloper@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed the CFLAG RT2860 from Makefile and dependency on it in the driver code.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixed remaining four build warnings in drivers/staging/rt2860/:
drivers/staging/rt2860/common/mlme.c:900: warning: format ‘%d’ expects type ‘int’, but argument 2 has type ‘ULONG’
drivers/staging/rt2860/common/rtmp_init.c:2049: warning: ‘Value’ may be used uninitialized in this function
drivers/staging/rt2860/sta_ioctl.c:361: warning: ‘return’ with a value, in function returning void
drivers/staging/rt2860/sta_ioctl.c:2468: warning: ‘return’ with a value, in function returning void
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Staging: rt2860: Ported v1.7.1.1 changes into v1.8.0.0, becoming v1.8.1.1
When RaLink released rt2860 v1.7.0.0, it lacked proper support for both WEP
and WPA/WPA2 encryption. Either was possible, but the module had to be
compiled to support only one or the other, never both.
Since the EeePC was the most common device with this hardware (and these
users were complaining to RaLink that WPA/WPA2 encryption didn't work)
RaLink released a fix as an "eeepc-specific" version of this driver, v1.7.1.1
Unfortunately, when v1.8.0.0 was released, this WPA/WPA2 fix was never
included.
What complicates things further is that RaLink has no interest in
continuing work on this Linux driver for their hardware.
This commit ports the changes introduced in v1.7.1.1 into the v1.8.0.0
release, upgrading the kernel's module to v1.8.1.1
Signed-off-by: Adam McDaniel <adam@array.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix staging/rt28x0 printk format warnings:
linux-next-20090209/drivers/staging/rt2860/common/spectrum.c:1599: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
linux-next-20090209/drivers/staging/rt2860/rt_linux.c:857: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
linux-next-20090209/drivers/staging/rt2870/common/spectrum.c:1598: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
linux-next-20090209/drivers/staging/rt2870/rt_linux.c:898: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The driver is in mainline now so there's no point in keeping the
kernel version compatibility wrappers around.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
IW_ENCODE_MODE is 0xF000 and thus !erq->flags & IW_ENCODE_MODE is always 0.
I assume that !(erq->flags & IW_ENCODE_MODE) was intended.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@ expression E; constant C; @@
(
!E & !C
|
- !E & C
+ !(E & C)
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew pointed out that I forgot to convert some files to unix format
when adding them originally. This patch runs dos2unix on the rtl8187se
files that needed them.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/rtl8187se/r8180_wx.c:1386: warning: initialization from incompatible pointer type
drivers/staging/rtl8187se/r8180_wx.c:1388: warning: initialization from incompatible pointer type
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix staging/rtl8187se printk format warnings:
drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c:845: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c:852: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix more android ram_console printk format warnings:
drivers/staging/android/ram_console.c:238: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'
drivers/staging/android/ram_console.c:238: warning: format '%d' expects type 'int', but argument 4 has type 'size_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix android printk format warnings:
linux-next-20090209/drivers/staging/android/ram_console.c:228: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'
linux-next-20090209/drivers/staging/android/ram_console.c:228: warning: format '%d' expects type 'int', but argument 4 has type 'size_t'
linux-next-20090209/drivers/staging/android/ram_console.c:326: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'size_t'
linux-next-20090209/drivers/staging/android/ram_console.c:326: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'size_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix printk format warnings in android binder:
drivers/staging/android/binder.c:2652: warning: format '%lx' expects type 'long unsigned int', but argument 7 has type 'pgprotval_t'
drivers/staging/android/binder.c:2659: warning: format '%lx' expects type 'long unsigned int', but argument 7 has type 'pgprotval_t'
drivers/staging/android/binder.c:2680: warning: format '%lx' expects type 'long unsigned int', but argument 7 has type 'pgprotval_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
See commit bedd30d9 (genirq: make irqreturn_t an enum)
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I run make on ioctl.c file and I got two warnings:
drivers/staging/otus/ioctl.c: In function ¡usbdrv_wpa_ioctl¢:
drivers/staging/otus/ioctl.c:2269: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/ioctl.c: In function ¡usbdrv_ioctl¢:
drivers/staging/otus/ioctl.c:2448: warning: ISO C90 forbids mixed declarations and code
From: Dragoslav Zaric <dragoslav.zaric.kd@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix otus ISO C90 warnings:
drivers/staging/otus/80211core/cmmsta.c:740: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/80211core/coid.c:219: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/80211core/coid.c:1437: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hprw.c:33: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hprw.c:53: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hprw.c:82: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hprw.c:163: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hprw.c:219: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hprw.c:831: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hprw.c:896: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:332: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:1329: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:1565: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:1606: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:1923: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:1997: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:2264: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:2296: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:2330: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:2350: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:2387: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:2425: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:4223: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:4283: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:4314: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:4380: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:4425: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:4531: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:4539: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpusb.c:69: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpusb.c:334: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpusb.c:580: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpreg.c:1774: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpreg.c:2478: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpani.c:61: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpani.c:80: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpani.c:145: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpani.c:352: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpani.c:393: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpani.c:472: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpani.c:517: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpani.c:592: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpani.c:633: warning: ISO C90 forbids mixed declarations and code
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This set of patches introduces calls to the following set of functions:
usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)
In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:
USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC
An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r1@ struct usb_endpoint_descriptor *epd; @@
- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)
@r5@ struct usb_endpoint_descriptor *epd; @@
- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
- \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)
@inc@
@@
#include <linux/usb.h>
@depends on !inc && (r1||r5)@
@@
+ #include <linux/usb.h>
#include <linux/usb/...>
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mimio driver uses input_* functions so it needs to depend on INPUT.
mimio.c:(.text+0x2526c9): undefined reference to `input_unregister_device'
mimio.c:(.text+0x2526da): undefined reference to `input_close_device'
mimio.c:(.text+0x252725): undefined reference to `input_free_device'
mimio.c:(.text+0x2528f1): undefined reference to `input_event'
mimio.c:(.text+0x252904): undefined reference to `input_event'
mimio.c:(.text+0x252921): undefined reference to `input_event'
mimio.c:(.text+0x252b3e): undefined reference to `input_event'
mimio.c:(.text+0x252b51): undefined reference to `input_event'
drivers/built-in.o:mimio.c:(.text+0x252bbd): more undefined references to `input_event' follow
mimio.c:(.text+0x252e42): undefined reference to `input_allocate_device'
mimio.c:(.text+0x2530ef): undefined reference to `input_register_device'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: mwilder@cs.nmsu.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix printk format warnings in altera pcie chdma:
drivers/staging/altpciechdma/altpciechdma.c:429: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'dma_addr_t'
drivers/staging/altpciechdma/altpciechdma.c:433: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'dma_addr_t'
drivers/staging/altpciechdma/altpciechdma.c:449: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'dma_addr_t'
drivers/staging/altpciechdma/altpciechdma.c:450: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'dma_addr_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trivial cleanup, list_del(); list_add_tail() is equivalent
to list_move_tail(). Semantic patch for coccinelle can be
found at www.cccmz.de/~snakebyte/list_move_tail.spatch
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This set of patches introduces calls to the following set of functions:
usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)
In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:
USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC
An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r1@ struct usb_endpoint_descriptor *epd; @@
- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)
@r5@ struct usb_endpoint_descriptor *epd; @@
- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
- \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)
@inc@
@@
#include <linux/usb.h>
@depends on !inc && (r1||r5)@
@@
+ #include <linux/usb.h>
#include <linux/usb/...>
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jason Andryuk noticed that at76_usb won't compile with current
wireless-testing tree. This is because net/ieee80211.h was missing.
net/ieee80211.h will be removed soon and at76_usb won't compile then that
happens. Preprare for that by using instead linux/ieee80211.h and copying
some structures not available.
Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
at76_usb has actually been already ported to use mac80211. Update the TODO
file to reflect this.
Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If dev is NULL it prints an error message. The error message dereferences
dev.
Compile tested only.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Leon Woestenberg <leon.woestenberg@axon.tv>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Evgeniy Polyakov
Greg Kroah-Hartman
David Täht
Peter Teoh
Josef Jiru
Mark Einon
Adam McDaniel
Randy Dunlap
Pekka Enberg
Julia Lawall
Roel Kluin
Herton Ronaldo Krzesinski
Alexander Beregalov
Dragoslav Zaric
Eric Sesterhenn
Wei Yongjun
Kalle Valo
Erik Andrén
Dan Carpenter