Commit Graph

387 Commits

Author SHA1 Message Date
Bryan Wu 1394f03221 blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix!  Tinyboards.

The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc.  (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000.  Since then ADI has put this core into its Blackfin
processor family of devices.  The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set.  It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.

The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf

The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc

This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/

We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel

[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:58 -07:00
Linus Torvalds 15700770ef Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (38 commits)
  kconfig: fix mconf segmentation fault
  kbuild: enable use of code from a different dir
  kconfig: error out if recursive dependencies are found
  kbuild: scripts/basic/fixdep segfault on pathological string-o-death
  kconfig: correct minor typo in Kconfig warning message.
  kconfig: fix path to modules.txt in Kconfig help
  usr/Kconfig: fix typo
  kernel-doc: alphabetically-sorted entries in index.html of 'htmldocs'
  kbuild: be more explicit on missing .config file
  kbuild: clarify the creation of the LOCALVERSION_AUTO string.
  kbuild: propagate errors from find in scripts/gen_initramfs_list.sh
  kconfig: refer to qt3 if we cannot find qt libraries
  kbuild: handle compressed cpio initramfs-es
  kbuild: ignore section mismatch warning for references from .paravirtprobe to .init.text
  kbuild: remove stale comment in modpost.c
  kbuild/mkuboot.sh: allow spaces in CROSS_COMPILE
  kbuild: fix make mrproper for Documentation/DocBook/man
  kbuild: remove kconfig binaries during make mrproper
  kconfig/menuconfig: do not hardcode '.config'
  kbuild: override build timestamp & version
  ...
2007-05-06 13:21:57 -07:00
Marcin Garski 11de39e2fb kconfig: fix mconf segmentation fault
I have found small bug in mconf, when you run it without any argument it
will sigsegv.

Without patch:
$ scripts/kconfig/mconf
Segmentation fault

With patch:
$ scripts/kconfig/mconf
can't find file (null)

Signed-off-by: Marcin Garski <mgarski@post.pl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-06 09:27:15 +02:00
Sam Ravnborg 767e581d75 kbuild: enable use of code from a different dir
To introduce support for source in one directory but output files
in another directory during a non O= build prefix all paths
with $(src) repsectively $(obj).

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-06 09:23:45 +02:00
Sam Ravnborg 5447d34b08 kconfig: error out if recursive dependencies are found
Sample:
config FOO
	bool "This is foo"
	depends on BAR

config BAR
	bool "This is bar"
	depends on FOO

This will result in following error message:
error: found recursive dependency: FOO -> BAR -> FOO

And will then exit with exit code equal 1 so make will stop.
Inspired by patch from: Adrian Bunk <bunk@stusta.de>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Adrian Bunk <bunk@stusta.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
2007-05-06 09:20:10 +02:00
Andy Green 04c58f8196 kbuild: scripts/basic/fixdep segfault on pathological string-o-death
build scripts: fixdep blows segfault on string CONFIG_MODULE seen

The string "CONFIG_MODULE" appearing anywhere in a source file causes
fixdep to segfault.  This string appeared in the wild in the current
mISDN sources (I think they meant CONFIG_MODULES).  But it shouldn't
segfault (esp as CONFIG_MODULE appeared in a quoted string).

Signed-off-by: Andy Green <andy@warmcat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 21:35:03 +02:00
Robert P. J. Day 1e093ecd4a kconfig: correct minor typo in Kconfig warning message.
Correct a minor spelling mistake in a Kconfig warning message.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:12 +02:00
Randy Dunlap 7ac1c14525 kbuild: be more explicit on missing .config file
Somewhat in reponse to kernel bugzilla #8197, be more explicit about
why 'make all' fails when there is no .config file.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:11 +02:00
Michael Ellerman eda890af79 kbuild: propagate errors from find in scripts/gen_initramfs_list.sh
If the find(1) in scripts/gen_initramfs_list.sh generates any errors, it
will cause gen_initramfs_list.sh to fail (because of "set -e"), however
the errors from find are not printed to the user. This is rather confusing:

~/src/powerpc$ make O=~/build/powerpc-cell32/
make[2]: *** [usr/initramfs_data.cpio.gz] Error 1
make[1]: *** [usr] Error 2
make[1]: *** Waiting for unfinished jobs....
make[1]: *** wait: No child processes.  Stop.
make: *** [_all] Error 2

It is much easier to work out what the problem is if we let the errors
from find hit the console, eg:

~/src/powerpc$ make O=~/build/powerpc-cell32/
find: /home/michael/initramfs-source/home: Permission denied
find: /home/michael/initramfs-source/lost+found: Permission denied
find: /home/michael/initramfs-source/opt: Permission denied
find: /home/michael/initramfs-source/root: Permission denied
make[2]: *** [usr/initramfs_data.cpio.gz] Error 1
make[1]: *** [usr] Error 2
make[1]: *** Waiting for unfinished jobs....
make[1]: *** wait: No child processes.  Stop.
make: *** [_all] Error 2

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:11 +02:00
Sam Ravnborg 9ae57004ca kconfig: refer to qt3 if we cannot find qt libraries
We do not support qt4 (yet) so the simple fix was to warn
that qt3 are missing.
The better fix would have been to implment qt4 support
but that has failed so far.

This solves http://bugzilla.kernel.org/show_bug.cgi?id=8277

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:10 +02:00
Alex Landau c299ec2d8e kbuild: handle compressed cpio initramfs-es
Make kbuild handle compressed cpio initramfs-es.  An already compressed
cpio is copied directly to usr/, while a non-compressed cpio is filtered
through gzip (no changes here) on its way to usr/.

If the user has created a compressed cpio by other means, this saves him
from uncompressing it, just to be compressed again by kbuild.

Signed-off-by: Alex Landau <landau.alex@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:10 +02:00
Sam Ravnborg b4d5171ac7 kbuild: ignore section mismatch warning for references from .paravirtprobe to .init.text
Added on request from:  Rusty Russell <rusty@rustcorp.com.au>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc:  Rusty Russell <rusty@rustcorp.com.au>
2007-05-02 20:58:10 +02:00
Sam Ravnborg 66bd32e443 kbuild: remove stale comment in modpost.c
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:10 +02:00
Uwe kleine-König f03e1666d6 kbuild/mkuboot.sh: allow spaces in CROSS_COMPILE
I'm currently using CROSS_COMPILE="ccache arm-linux-".  With that the bash
builtin command "type" searches for ccache and arm-linux-mkimage and so sets
MKIMAGE="/path/to/ccache" as I don't have arm-linux-mkimage.  Then the script
dies with an error, that ccache doesn't support the argument -A.

This patch adds some quoting such that it works again for me.

Please note that this patch doesn't help you if you use ${CROSSCOMPILE}-mkimage
and ccache as mkuboot.sh now searches for the command
"ccache arm-linux-mkimage".

Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:10 +02:00
Sam Ravnborg 145c90475f kbuild: remove kconfig binaries during make mrproper
Nigel Cunningham <nigel@nigel.suspend2.net> noticed
that 'make mrproper' did not remove mconf.
Fixed so we now remove all relevant binaries.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc:  Nigel Cunningham <nigel@nigel.suspend2.net>
2007-05-02 20:58:10 +02:00
Sam Ravnborg d802b50f0d kconfig/menuconfig: do not hardcode '.config'
Export and use the function conf_get_configname()
to retreive the default configuration filename.

Suggested by: Roman Zippel <zippel@linux-m68k.org>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:09 +02:00
Sam Ravnborg 87c94bfb8a kbuild: override build timestamp & version
Introduce KBUILD_BUILD_VERSION to make it
possible to override kernel build version
during build time.

Introduce KBUILD_BUILD_TIMESTAMP to make it
possible to override kernel build timestamp
during build time.

But variables are useful mainly by distros
that want to pass info from an SCM when
building the kernel. Timestamp could be last
checkin date for a file etc.

The idea came from Olaf Hering <olaf@aepfle.de>

Cc: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:09 +02:00
Sam Ravnborg c53aeca059 kbuild: complain about missing system calls
Most system calls seems to get added to i386 first. This patch
automatically generates a warning for any new system call which is
implemented on i386 but not the architecture currently being compiled.
On PowerPC at the moment, for example, it results in these warnings:
init/missing_syscalls.h:935:3: warning: #warning syscall sync_file_range not implemented
init/missing_syscalls.h:947:3: warning: #warning syscall getcpu not implemented
init/missing_syscalls.h:950:3: warning: #warning syscall epoll_pwait not implemented

The file scripts/checksyscalls.sh list a number of legacy system calls
that are ignored because they only makes sense on i386 systems.

Other contributors to this patch are Russell King <rmk+lkml@arm.linux.org.uk>
and Stéphane Jourdois <kwisatz@rubis.org>

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:09 +02:00
Sam Ravnborg 4be40e2223 kbuild: do not emit src version warning for non-modules
modpost is now called with .o files that are not modules.
So do not warn if there is no corresponding .mod
file listing .o files (in .tmp_versions/).

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:09 +02:00
Sam Ravnborg 95e30f9593 menuconfig: remember alternate config filename
When loading an alternate configuration use that file as
current configuration filename.
Make the filename visible in the dialog.
Default continue to be .config.

Inspired by patch from: Cyrill Gorcunov <gorcunov@gmail.com>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc:  Cyrill Gorcunov <gorcunov@gmail.com>
2007-05-02 20:58:09 +02:00
Matthew Wilcox 2a11665945 kbuild: distinguish between errors and warnings in modpost
Some of modpost's warnings are fatal, and some are not.  Adopt the
compiler distinction between errors and warnings by calling merror()
for fatal diagnostics and warn() for non-fatal ones.
merror() was used as replacemtn for error() to avoid clash with glibc

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:08 +02:00
Marco Costalba 63431e7569 kconfig/xconfig: sync main view with search dialog current menu
When changing current menu in search dialog update also main view

Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:08 +02:00
Mike Frysinger f88d205501 menuconfig: dont use obsolete index() function in lxdialog
The index() function is obsolete, use strchr() instead.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:08 +02:00
H. Peter Anvin 6e019b001d cleanpatch: a script to clean up stealth whitespace added by a patch
This script is a companion to the "cleanfile" script.  This cleans
up a patch in unified diff format *before* it is applied.  Note that
the empty lines at the end of file detection *requires* that the diff was
taken with at least one line of context around each hunk, or bad things
will happen.

This script cleans up various classes of stealth whitespace.  In
particular, it cleans up:

- Whitespace (spaces or tabs)before newline;
- DOS line endings (CR before LF);
- Space before tab (spaces are deleted or converted to tabs);
- Empty lines at end of file.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:08 +02:00
H. Peter Anvin 12b315603a cleanfile: a script to clean up stealth whitespace
This script cleans up various classes of stealth whitespace.  In
particular, it cleans up:

- Whitespace (spaces or tabs)before newline;
- DOS line endings (CR before LF);
- Space before tab (spaces are deleted or converted to tabs);
- Empty lines at end of file.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:08 +02:00
Sam Ravnborg dc24f0e708 kbuild: remove dependency on input.h from file2alias
Almost all definitions used by file2alias was already
present in mod_devicetable.h.
Added the last definition and killed the input.h usage.

The errornous include was pointed out
by: Jan Engelhardt <jengelh@linux01.gwdg.de>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Cc: Deepak Saxena <dsaxena@plexity.net>
2007-05-02 20:58:08 +02:00
Sam Ravnborg 5a4910fbbe kbuild: whitelist logo references from .text to .init.data
drivers/video/logo has references from .text to .init.data
but function is only used during early init.
So reference is OK and we do not want to warn about them =>
whitelist the reference.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:08 +02:00
Sam Ravnborg a61b2dfd18 kbuild: fix segmentation fault in modpost
If modpost was called manually with filenames without '/'
then modpost would segfault.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:07 +02:00
Sam Ravnborg 9bf8cb9b79 kbuild: fix warnings from .pci_fixup section
Now where we do not pass vmlinux to modpost we started
to see section mismatch warnings from .pci_fixup.
Refactored code a little to include these in the
whitelist again.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:07 +02:00
Sam Ravnborg aae5f662a3 kbuild: whitelist section mismatch in init/main.c
In init/main.c we have a reference from rest_init() to .init.text
which is intentional.
Rename the function 'init' to 'kernel_init' to make it a
kernel wide unique symbol and whitelist the reference.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:07 +02:00
Sam Ravnborg 85bd2fddd6 kbuild: fix section mismatch check for vmlinux
vmlinux does not contain relocation entries which is
used by the section mismatch checks.
Reported by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>

Use the individual objects as inputs to overcome
this limitation.
In modpost check the .o files and skip non-ELF files.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:07 +02:00
Vivek Goyal 1833d6bc72 [PATCH] i386: modpost apic related warning fixes
o Modpost generates warnings for i386 if compiled with CONFIG_RELOCATABLE=y

WARNING: vmlinux - Section mismatch: reference to .init.text:find_unisys_acpi_oem_table from .text between 'acpi_madt_oem_check' (at offset 0xc0101eda) and 'enable_apic_mode'
WARNING: vmlinux - Section mismatch: reference to .init.text:acpi_get_table_header_early from .text between 'acpi_madt_oem_check' (at offset 0xc0101ef0) and 'enable_apic_mode'
WARNING: vmlinux - Section mismatch: reference to .init.text:parse_unisys_oem from .text between 'acpi_madt_oem_check' (at offset 0xc0101f2e) and 'enable_apic_mode'
WARNING: vmlinux - Section mismatch: reference to .init.text:setup_unisys from .text between 'acpi_madt_oem_check' (at offset 0xc0101f37) and 'enable_apic_mode'WARNING: vmlinux - Section mismatch: reference to .init.text:parse_unisys_oem from .text between 'mps_oem_check' (at offset 0xc0101ec7) and 'acpi_madt_oem_check'
WARNING: vmlinux - Section mismatch: reference to .init.text:es7000_sw_apic from .text between 'enable_apic_mode' (at offset 0xc0101f48) and 'check_apicid_present'

o Some functions which are inline (acpi_madt_oem_check) are not inlined by
  compiler as these functions are accessed using function pointer. These
  functions are put in .text section and they in-turn access __init type
  functions hence modpost generates warnings.

o Do not iniline acpi_madt_oem_check, instead make it __init.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 19:27:08 +02:00
Jan Beulich c21b1e4d9b [PATCH] kbuild: fix dependency generation
Commit 2e3646e51b changed the way the
split config tree is built, but failed to also adjust fixdep accordingly
- if changing a config option from or to m, files referencing the
respective CONFIG_..._MODULE (but not the corresponding CONFIG_...)
didn't get rebuilt.

The problem is that trisate symbol are represent with three different
symbols:
    SYMBOL=n => no symbol defined
    SYMBOL=y => CONFIG_SYMBOL defined to '1'
    SYMBOL=m => CONFIG_SYMBOL_MODULE defined to '1'

But conf_split_config do not distingush between the =y and =m case, so
only the =y case is honoured.

This is fixed in fixdep so when a CONFIG symbol with _MODULE is found we
skip that part and only look for the CONFIG_SYMBOL version.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-01 14:23:57 -07:00
Randy Dunlap 328d24403d [PATCH] kernel-doc: allow space after __attribute__
Allow space(s) between "__attribute__" and "((blah))" so that
kernel-doc does not complain like:

Warning(/tester/linsrc/linux-2.6.20-git15//kernel/timer.c:939): No description found for parameter 'read_persistent_clock(void'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 14:53:36 -08:00
Linus Torvalds b0138a6cb7 Merge master.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6: (78 commits)
  [PARISC] Use symbolic last syscall in __NR_Linux_syscalls
  [PARISC] Add missing statfs64 and fstatfs64 syscalls
  Revert "[PARISC] Optimize TLB flush on SMP systems"
  [PARISC] Compat signal fixes for 64-bit parisc
  [PARISC] Reorder syscalls to match unistd.h
  Revert "[PATCH] make kernel/signal.c:kill_proc_info() static"
  [PARISC] fix sys_rt_sigqueueinfo
  [PARISC] fix section mismatch warnings in harmony sound driver
  [PARISC] do not export get_register/set_register
  [PARISC] add ENTRY()/ENDPROC() and simplify assembly of HP/UX emulation code
  [PARISC] convert to use CONFIG_64BIT instead of __LP64__
  [PARISC] use CONFIG_64BIT instead of __LP64__
  [PARISC] add ASM_EXCEPTIONTABLE_ENTRY() macro
  [PARISC] more ENTRY(), ENDPROC(), END() conversions
  [PARISC] fix ENTRY() and ENDPROC() for 64bit-parisc
  [PARISC] Fixes /proc/cpuinfo cache output on B160L
  [PARISC] implement standard ENTRY(), END() and ENDPROC()
  [PARISC] kill ENTRY_SYS_CPUS
  [PARISC] clean up debugging printks in smp.c
  [PARISC] factor syscall_restart code out of do_signal
  ...

Fix conflict in include/linux/sched.h due to kill_proc_info() being made
publicly available to PARISC again.
2007-02-26 12:48:06 -08:00
David Brownell da68d61f89 [PATCH] remove modpost false warnings on ARM
This patch stops "modpost" from issuing erroneous modpost warnings on ARM
builds, which it's been doing since since maybe last summer.  A canonical
example would be driver method table entries:

  WARNING: <path> - Section mismatch: reference to .exit.text:<name>_remove
	from .data after '$d' (at offset 0x4)

That "$d" symbol is generated by tools conformant with ARM ABI specs; in
this case it's a symbol **in the middle of** a "<name>_driver" struct.

The erroneous warnings appear to be issued because "modpost" whitelists
references from "<name>_driver" data into init and exit sections ...  but
doesn't know should also include those "$d" mapping symbols, which are not
otherwise associated with "<name>_driver" symbols.

This patch prevents the modpost symbol lookup code from ever returning
those mapping symbols, so it will return a whitelisted symbol instead.
Then things work as expected.

Now to revert various code-bloating "fixes" that got merged because of this
modpost bug....

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20 17:10:16 -08:00
Randy Dunlap 262d9b0130 [PATCH] kernel-doc: include struct short description in title output
Output of a function or struct in html mode needs to include the short
description from the function/struct name line in the output title line.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20 17:10:14 -08:00
Kyle McMartin f354ef8abe [PARISC] rename *_ANY_ID to PA_*_ANY_ID in the exported header
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2007-02-17 01:09:12 -05:00
Kyle McMartin f3cf267335 [PARISC] generate modalias for parisc_device_id tables
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2007-02-17 01:08:45 -05:00
Kyle McMartin e7b3ca0854 Merge branch 'parisc' from /home/kyle/repos/parisc-2.6.git
Conflicts:

	arch/parisc/hpux/sys_hpux.c
	arch/parisc/mm/ioremap.c
2007-02-17 00:18:23 -05:00
Linus Torvalds 414f827c46 Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (94 commits)
  [PATCH] x86-64: Remove mk_pte_phys()
  [PATCH] i386: Fix broken CONFIG_COMPAT_VDSO on i386
  [PATCH] i386: fix 32-bit ioctls on x64_32
  [PATCH] x86: Unify pcspeaker platform device code between i386/x86-64
  [PATCH] i386: Remove extern declaration from mm/discontig.c, put in header.
  [PATCH] i386: Rename cpu_gdt_descr and remove extern declaration from smpboot.c
  [PATCH] i386: Move mce_disabled to asm/mce.h
  [PATCH] i386: paravirt unhandled fallthrough
  [PATCH] x86_64: Wire up compat epoll_pwait
  [PATCH] x86: Don't require the vDSO for handling a.out signals
  [PATCH] i386: Fix Cyrix MediaGX detection
  [PATCH] i386: Fix warning in cpu initialization
  [PATCH] i386: Fix warning in microcode.c
  [PATCH] x86: Enable NMI watchdog for AMD Family 0x10 CPUs
  [PATCH] x86: Add new CPUID bits for AMD Family 10 CPUs in /proc/cpuinfo
  [PATCH] i386: Remove fastcall in paravirt.[ch]
  [PATCH] x86-64: Fix wrong gcc check in bitops.h
  [PATCH] x86-64: survive having no irq mapping for a vector
  [PATCH] i386: geode configuration fixes
  [PATCH] i386: add option to show more code in oops reports
  ...
2007-02-14 09:46:06 -08:00
Cyrill V. Gorcunov ed8b4d4d7a [PATCH] qconf: hide empty list items
This patch fixes showing empty config list items if "Option/Show All
Options" is turned on.  For example empty items appears on list of 'Block
Layer' menu.

Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:52 -08:00
Cyrill V. Gorcunov f253f00003 [PATCH] qconf: Back button behaviour normalization
Do "Back" button behaviour normalization so it is enabled starting from
second-level menu only.

Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:52 -08:00
Cyrill V. Gorcunov 786fb18d01 [PATCH] qconf: fix showing help info on failed search
qconf does not clear help text in search window if previous search has been
failed.

Signed-off-by: Cyrill V. Gorcunov <gorcunov@mail.ru>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:52 -08:00
Shlomi Fish 66e7c7230f [PATCH] qconf: relocate Search Command
Relocate the qconf search command to the "Edit"->"Find" menu option.

This is per the discussion on my qconf search dialog patch.

Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:51 -08:00
Karsten Wiese 49e5646d65 [PATCH] qconf: immediately update integer and string values in xconfig display
In xconfig's display integer and string values are also shown as part of
the config item's descriptive text.

This patch updates the descriptive text, when the corresponding value has
been changed.  Fix for http://bugzilla.kernel.org/show_bug.cgi?id=7744

Take2 uses updateList() so config values dependending on the changed value
see the change.

Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:51 -08:00
s situert 895a39a084 [PATCH] Make mkcompile_h use LANG=C and LC_ALL=C for $CC -v
Fix a minor bug in mkcompile_h.  As one can see, the current locale is used
while getting the version of gcc.  This produces problems when a locale
other than C or en_US is used.  As an example, my /proc/version contains
Turkish characters in iso-8859-9 encoding.

This patch fixes this issue by making sure that the C locale is used to get
gcc's version.

Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:51 -08:00
Mike Frysinger 8c7e4498ad [PATCH] search a little harder for mkimage
Check to see if `${CROSS_COMPILE}mkimage` exists and if not, fall back to
the standard `mkimage`

The Blackfin toolchain includes mkimage, but we dont want to namespace
collide with any of the user's system setup, so we prefix it with our
toolchain name.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:51 -08:00
Vivek Goyal f8657e1b55 [PATCH] i386: move startup_32() in text.head section
o Entry startup_32 was in .text section but it was accessing some init
  data too and it prompts MODPOST to generate compilation warnings.

WARNING: vmlinux - Section mismatch: reference to .init.data:boot_params from
.text between '_text' (at offset 0xc0100029) and 'startup_32_smp'
WARNING: vmlinux - Section mismatch: reference to .init.data:boot_params from
.text between '_text' (at offset 0xc0100037) and 'startup_32_smp'
WARNING: vmlinux - Section mismatch: reference to
.init.data:init_pg_tables_end from .text between '_text' (at offset
0xc0100099) and 'startup_32_smp'

o Can't move startup_32 to .init.text as this entry point has to be at the
  start of bzImage. Hence moved startup_32 to a new section .text.head and
  instructed MODPOST to not to generate warnings if init data is being
  accessed from .text.head section. This code has been audited.

o SMP boot up code (startup_32_smp) can go into .init.text if CPU hotplug
  is not supported. Otherwise it generates more warnings

WARNING: vmlinux - Section mismatch: reference to .init.data:new_cpu_data from
.text between 'checkCPUtype' (at offset 0xc0100126) and 'is486'
WARNING: vmlinux - Section mismatch: reference to .init.data:new_cpu_data from
.text between 'checkCPUtype' (at offset 0xc0100130) and 'is486'

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:22 +01:00
Randy Dunlap 412ecd7751 [PATCH] fix fatal kernel-doc error
Teach kernel-doc to handle functions that look like the new
pcim_iomap_table().  Fixes this fatal error in scripts/kernel-doc:

  DOCPROC Documentation/DocBook/kernel-api.xml
Error(/tester/linsrc/linux-2.6.20-git6//drivers/pci/pci.c:1351): cannot understand prototype: 'void __iomem * const * pcim_iomap_table(struct pci_dev *pdev) '
make[1]: *** [Documentation/DocBook/kernel-api.xml] Error 1
make: *** [htmldocs] Error 2

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 11:48:20 -08:00