Adrian Bunk reported that enabling 4MB page size breaks the build.
The problem is that MAX_ORDER combined with the page shift exceeds the
SECTION_SIZE_BITS we use in asm-sparc64/sparsemem.h
There are several ways I suppose we could work around this. For one
we could define a CONFIG_FORCE_MAX_ZONEORDER to decrease MAX_ORDER in
these higher page size cases.
But I also know that these page size cases are broken wrt. TLB miss
handling especially on pre-hypervisor systems, and there isn't an easy
way to fix that.
These options were meant to be fun experimental hacks anyways, and
only 8K and 64K make any sense to support.
So remove 512K and 4M base page size support. Of course, we still
support these page sizes for huge pages.
Signed-off-by: David S. Miller <davem@davemloft.net>
With this commit all sparc64 header files are moved to asm-sparc.
The remaining files (71 files) were too different to be trivially
merged so divide them up in a _32.h and a _64.h file which
are both included from the file with no bit size.
The following script were used:
cd include
FILES=`wc -l asm-sparc64/*h | grep -v '^ 1' | cut -b 20-`
for FILE in ${FILES}; do
echo $FILE:
BASE=`echo $FILE | cut -d '.' -f 1`
FN32=${BASE}_32.h
FN64=${BASE}_64.h
GUARD=___ASM_SPARC_`echo $BASE | tr '-' '_' | tr [:lower:] [:upper:]`_H
git mv asm-sparc/$FILE asm-sparc/$FN32
git mv asm-sparc64/$FILE asm-sparc/$FN64
echo git mv done
printf "#ifndef %s\n" $GUARD > asm-sparc/$FILE
printf "#define %s\n" $GUARD >> asm-sparc/$FILE
printf "#if defined(__sparc__) && defined(__arch64__)\n" >> asm-sparc/$FILE
printf "#include <asm-sparc/%s>\n" $FN64 >> asm-sparc/$FILE
printf "#else\n" >> asm-sparc/$FILE
printf "#include <asm-sparc/%s>\n" $FN32 >> asm-sparc/$FILE
printf "#endif\n" >> asm-sparc/$FILE
printf "#endif\n" >> asm-sparc/$FILE
git add asm-sparc/$FILE
echo new file done
printf "#include <asm-sparc/%s>\n" $FILE > asm-sparc64/$FILE
git add asm-sparc64/$FILE
echo sparc64 file done
done
The guard contains three '_' to avoid conflict with existing guards.
In additing the two Kbuild files are emptied to avoid breaking
headers_* targets.
We will reintroduce the exported header files when the necessary
kbuild changes are merged.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A manual inspection revealed that the following headerfiles
contained only trivial differences:
hw_irq.h idprom.h kmap_types.h kvm.h spinlock_types.h sunbpp.h unaligned.h
The only noteworthy change are that sparc64 had a volatile
qualifer that sparc missed in spinlock_types.h.
In addition a few comments were updated.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Used the following script to find equal header files:
SPARC64=`ls asm-sparc64`
for FILE in ${SPARC64}; do
cmp -s asm-sparc/$FILE asm-sparc64/$FILE;
if [ $? = 0 ]; then
printf "#include <asm-sparc/%s>\n" $FILE > asm-sparc64/$FILE
fi
done
A few of the equal files are a simple include from
asm-generic, but by including the file from asm-sparc
we know they are equal for sparc and sparc64.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Used the following script to copy the files:
cd include
set -e
SPARC64=`ls asm-sparc64`
for FILE in ${SPARC64}; do
if [ -f asm-sparc/$FILE ]; then
echo $FILE exist in asm-sparc
else
git mv asm-sparc64/$FILE asm-sparc/$FILE
printf "#include <asm-sparc/$FILE>\n" > asm-sparc64/$FILE
git add asm-sparc64/$FILE
fi
done
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Joined the two files as they contain distinct definitions.
Inspired by patch from: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Adrian Bunk <bunk@kernel.org>
sparc64 exports openprom.h to userspace so let sparc follow
the example.
As openprom.h pulled in another not-for-export vaddrs.h header
file it required a few changes to fix the build.
The definition af VMALLOC_* were moved to pgtable as this is
where sparc64 has them.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Copy content of sparc64 file to sparc file.
There is only minimal possibilities for further unification.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Bring the commit e55c57e0b5
("[SPARC64]: Report any user access faults in termios accessors")
over to sparc when unifying the two files.
The diff was manually inspected to contain no
other relevant changes.
This unification therefore changes functionality of sparc.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The type of tcflag_t differs from 32 and 64 bit.
For 32 bit it is long
For 64 bit it is int
Altough these have same size then I was not sure that
it was OK to change the 64 bit version to long as this
is part of the ABI so it was made conditional.
:$ diff -u include/asm-sparc/termbits.h include/asm-sparc64/termbits.h
:-- include/asm-sparc/termbits.h 2008-06-13 06:42:07.000000000 +0200
:++ include/asm-sparc64/termbits.h 2008-06-13 06:42:07.000000000 +0200
:@@ -1,11 +1,11 @@
:-#ifndef _SPARC_TERMBITS_H
:-#define _SPARC_TERMBITS_H
:+#ifndef _SPARC64_TERMBITS_H
:+#define _SPARC64_TERMBITS_H
:
: #include <linux/posix_types.h>
:
: typedef unsigned char cc_t;
: typedef unsigned int speed_t;
:-typedef unsigned long tcflag_t;
:+typedef unsigned int tcflag_t;
:
: #define NCC 8
: struct termio {
:@@ -102,7 +102,7 @@
: #define IXANY 0x00000800
: #define IXOFF 0x00001000
: #define IMAXBEL 0x00002000
:-#define IUTF8 0x00004000
:+#define IUTF8 0x00004000
:
: /* c_oflag bits */
: #define OPOST 0x00000001
:@@ -171,7 +171,6 @@
: #define HUPCL 0x00000400
: #define CLOCAL 0x00000800
: #define CBAUDEX 0x00001000
:-/* We'll never see these speeds with the Zilogs, but for completeness... */
: #define BOTHER 0x00001000
: #define B57600 0x00001001
: #define B115200 0x00001002
:@@ -199,7 +198,7 @@
: #define B3500000 0x00001012
: #define B4000000 0x00001013 */
: #define CIBAUD 0x100f0000 /* input baud rate (not used) */
:-#define CMSPAR 0x40000000 /* mark or space (stick) parity */
:+#define CMSPAR 0x40000000 /* mark or space (stick) parity */
: #define CRTSCTS 0x80000000 /* flow control */
:
: #define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
:@@ -258,4 +257,4 @@
: #define TCSADRAIN 1
: #define TCSAFLUSH 2
:
:-#endif /* !(_SPARC_TERMBITS_H) */
:+#endif /* !(_SPARC64_TERMBITS_H) */
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
RLIM_INFINITY differ from 32 and 64 bit.
The rest is equal.
:$ diff -u include/asm-sparc/resource.h include/asm-sparc64/resource.h
:-- include/asm-sparc/resource.h 2008-06-13 06:46:39.000000000 +0200
:++ include/asm-sparc64/resource.h 2008-06-13 06:46:39.000000000 +0200
:@@ -1,11 +1,11 @@
: /*
: * resource.h: Resource definitions.
: *
:- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
:+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
: */
:
:-#ifndef _SPARC_RESOURCE_H
:-#define _SPARC_RESOURCE_H
:+#ifndef _SPARC64_RESOURCE_H
:+#define _SPARC64_RESOURCE_H
:
: /*
: * These two resource limit IDs have a Sparc/Linux-specific ordering,
:@@ -14,13 +14,6 @@
: #define RLIMIT_NOFILE 6 /* max number of open files */
: #define RLIMIT_NPROC 7 /* max number of processes */
:
:-/*
:- * SuS says limits have to be unsigned.
:- * We make this unsigned, but keep the
:- * old value for compatibility:
:- */
:-#define RLIM_INFINITY 0x7fffffff
:-
: #include <asm-generic/resource.h>
:
:-#endif /* !(_SPARC_RESOURCE_H) */
:+#endif /* !(_SPARC64_RESOURCE_H) */
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
There were only a few trivial changes and a few additions
in the sparc64 variant of this file.
This patch copies the sparc64 specific bits to the sparc version
of fbio.h so they are equal. A later patch will merge the two.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Padding in the sembuf structure made conditional
as only 32 bit sparc did so.
:$ diff -u include/asm-sparc/sembuf.h include/asm-sparc64/sembuf.h
:-- include/asm-sparc/sembuf.h 2008-06-13 06:42:07.000000000 +0200
:++ include/asm-sparc64/sembuf.h 2008-06-13 06:42:07.000000000 +0200
:@@ -1,21 +1,18 @@
:-#ifndef _SPARC_SEMBUF_H
:-#define _SPARC_SEMBUF_H
:+#ifndef _SPARC64_SEMBUF_H
:+#define _SPARC64_SEMBUF_H
:
: /*
:- * The semid64_ds structure for sparc architecture.
:+ * The semid64_ds structure for sparc64 architecture.
: * Note extra padding because this structure is passed back and forth
: * between kernel and user space.
: *
: * Pad space is left for:
:- * - 64-bit time_t to solve y2038 problem
:- * - 2 miscellaneous 32-bit values
:+ * - 2 miscellaneous 64-bit values
: */
:
: struct semid64_ds {
: struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
:- unsigned int __pad1;
: __kernel_time_t sem_otime; /* last semop time */
:- unsigned int __pad2;
: __kernel_time_t sem_ctime; /* last change time */
: unsigned long sem_nsems; /* no. of semaphores in array */
: unsigned long __unused1;
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Padding from 32 bit sparc kept using preprocessor magic
:$ diff -u include/asm-sparc/msgbuf.h include/asm-sparc64/msgbuf.h
:-- include/asm-sparc/msgbuf.h 2008-06-13 06:42:07.000000000 +0200
:++ include/asm-sparc64/msgbuf.h 2008-06-13 06:42:07.000000000 +0200
:@@ -7,17 +7,13 @@
: * between kernel and user space.
: *
: * Pad space is left for:
:- * - 64-bit time_t to solve y2038 problem
:- * - 2 miscellaneous 32-bit values
:+ * - 2 miscellaneous 64-bit values
: */
:
: struct msqid64_ds {
: struct ipc64_perm msg_perm;
:- unsigned int __pad1;
: __kernel_time_t msg_stime; /* last msgsnd time */
:- unsigned int __pad2;
: __kernel_time_t msg_rtime; /* last msgrcv time */
:- unsigned int __pad3;
: __kernel_time_t msg_ctime; /* last change time */
: unsigned long msg_cbytes; /* current number of bytes on queue */
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Trivial differenses in comments - used the version from sparc64
:$ diff -u include/asm-sparc/ioctls.h include/asm-sparc64/ioctls.h
:-- include/asm-sparc/ioctls.h 2008-06-13 08:46:29.000000000 +0200
:++ include/asm-sparc64/ioctls.h 2008-06-13 08:46:29.000000000 +0200
:@@ -1,5 +1,5 @@
:-#ifndef _ASM_SPARC_IOCTLS_H
:-#define _ASM_SPARC_IOCTLS_H
:+#ifndef _ASM_SPARC64_IOCTLS_H
:+#define _ASM_SPARC64_IOCTLS_H
:
: #include <asm/ioctl.h>
:
:@@ -22,7 +22,7 @@
:
: /* Note that all the ioctls that are not available in Linux have a
: * double underscore on the front to: a) avoid some programs to
:- * thing we support some ioctls under Linux (autoconfiguration stuff)
:+ * think we support some ioctls under Linux (autoconfiguration stuff)
: */
: /* Little t */
: #define TIOCGETD _IOR('t', 0, int)
:@@ -110,7 +110,7 @@
: #define TIOCSERGETLSR 0x5459 /* Get line status register */
: #define TIOCSERGETMULTI 0x545A /* Get multiport config */
: #define TIOCSERSETMULTI 0x545B /* Set multiport config */
:-#define TIOCMIWAIT 0x545C /* Wait input */
:+#define TIOCMIWAIT 0x545C /* Wait for change on serial input line(s) */
: #define TIOCGICOUNT 0x545D /* Read serial port inline interrupt counts */
:
: /* Kernel definitions */
:@@ -133,4 +133,4 @@
: #define TIOCPKT_NOSTOP 16
: #define TIOCPKT_DOSTOP 32
:
:-#endif /* !(_ASM_SPARC_IOCTLS_H) */
:+#endif /* !(_ASM_SPARC64_IOCTLS_H) */
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Copy was done using the following simple script:
set -e
SPARC64="h display7seg.h envctrl.h psrcompat.h pstate.h uctx.h utrap.h watchdog.h"
for FILE in ${SPARC64}; do
if [ -f asm-sparc/$FILE ]; then
echo $FILE exist in asm-sparc
fi
cat asm-sparc64/$FILE > asm-sparc/$FILE
printf "#include <asm-sparc/$FILE>\n" > asm-sparc64/$FILE
done
The name of the copied files are added to asm-sparc/Kbuild
to keep "make headers_check" functional.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This seems to be left from the long gone AP1000 support.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
[PATCH] ocfs2: fix oops in mmap_truncate testing
configfs: call drop_link() to cleanup after create_link() failure
configfs: Allow ->make_item() and ->make_group() to return detailed errors.
configfs: Fix failing mkdir() making racing rmdir() fail
configfs: Fix deadlock with racing rmdir() and rename()
configfs: Make configfs_new_dirent() return error code instead of NULL
configfs: Protect configfs_dirent s_links list mutations
configfs: Introduce configfs_dirent_lock
ocfs2: Don't snprintf() without a format.
ocfs2: Fix CONFIG_OCFS2_DEBUG_FS #ifdefs
ocfs2/net: Silence build warnings on sparc64
ocfs2: Handle error during journal load
ocfs2: Silence an error message in ocfs2_file_aio_read()
ocfs2: use simple_read_from_buffer()
ocfs2: fix printk format warnings with OCFS2_FS_STATS=n
[PATCH 2/2] ocfs2: Instrument fs cluster locks
[PATCH 1/2] ocfs2: Add CONFIG_OCFS2_FS_STATS config option
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: fix asm/e820.h for userspace inclusion
x86: fix numaq_tsc_disable
x86: fix kernel_physical_mapping_init() for large x86 systems
asm-x86/e820.h is included from userspace. 'x86: make e820.c to have
common functions' (b79cd8f126) broke it:
make -C Documentation/lguest
cc -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include
lguest.c -lz -o lguest
In file included from ../../include/asm-x86/bootparam.h:8,
from lguest.c:45:
../../include/asm/e820.h:66: error: expected ‘)’ before ‘start’
../../include/asm/e820.h:67: error: expected ‘)’ before ‘start’
../../include/asm/e820.h:68: error: expected ‘)’ before ‘start’
../../include/asm/e820.h:72: error: expected ‘=’, ‘,’, ‘;’, ‘asm’
or ‘__attribute__’ before ‘e820_update_range’
...
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'ptrace-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-utrace:
fix dangling zombie when new parent ignores children
do_wait: return security_task_wait() error code in place of -ECHILD
ptrace children revamp
do_wait reorganization
ptrace no longer fiddles with the children/sibling links, and the
old ptrace_children list is gone. Now ptrace, whether of one's own
children or another's via PTRACE_ATTACH, just uses the new ptraced
list instead.
There should be no user-visible difference that matters. The only
change is the order in which do_wait() sees multiple stopped
children and stopped ptrace attachees. Since wait_task_stopped()
was changed earlier so it no longer reorders the children list, we
already know this won't cause any new problems.
Signed-off-by: Roland McGrath <roland@redhat.com>
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (72 commits)
Revert "x86/PCI: ACPI based PCI gap calculation"
PCI: remove unnecessary volatile in PCIe hotplug struct controller
x86/PCI: ACPI based PCI gap calculation
PCI: include linux/pm_wakeup.h for device_set_wakeup_capable
PCI PM: Fix pci_prepare_to_sleep
x86/PCI: Fix PCI config space for domains > 0
Fix acpi_pm_device_sleep_wake() by providing a stub for CONFIG_PM_SLEEP=n
PCI: Simplify PCI device PM code
PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleep
PCI ACPI: Rework PCI handling of wake-up
ACPI: Introduce new device wakeup flag 'prepared'
ACPI: Introduce acpi_device_sleep_wake function
PCI: rework pci_set_power_state function to call platform first
PCI: Introduce platform_pci_power_manageable function
ACPI: Introduce acpi_bus_power_manageable function
PCI: make pci_name use dev_name
PCI: handle pci_name() being const
PCI: add stub for pci_set_consistent_dma_mask()
PCI: remove unused arch pcibios_update_resource() functions
PCI: fix pci_setup_device()'s sprinting into a const buffer
...
Fixed up conflicts in various files (arch/x86/kernel/setup_64.c,
arch/x86/pci/irq.c, arch/x86/pci/pci.h, drivers/acpi/sleep/main.c,
drivers/pci/pci.c, drivers/pci/pci.h, include/acpi/acpi_bus.h) from x86
and ACPI updates manually.
* 'for_linus' of git://git.infradead.org/~dedekind/ubifs-2.6:
UBIFS: include to compilation
UBIFS: add new flash file system
UBIFS: add brief documentation
MAINTAINERS: add UBIFS section
do_mounts: allow UBI root device name
VFS: export sync_sb_inodes
VFS: move inode_lock into sync_sb_inodes
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (76 commits)
IDE: Report errors during drive reset back to user space
Update documentation of HDIO_DRIVE_RESET ioctl
IDE: Remove unused code
IDE: Fix HDIO_DRIVE_RESET handling
hd.c: remove the #include <linux/mc146818rtc.h>
update the BLK_DEV_HD help text
move ide/legacy/hd.c to drivers/block/
ide/legacy/hd.c: use late_initcall()
remove BLK_DEV_HD_ONLY
ide: endian annotations in ide-floppy.c
ide-floppy: zero out the whole struct ide_atapi_pc on init
ide-floppy: fold idefloppy_create_test_unit_ready_cmd into idefloppy_open
ide-cd: move request prep chunk from cdrom_do_newpc_cont to rq issue path
ide-cd: move request prep from cdrom_start_rw_cont to rq issue path
ide-cd: move request prep from cdrom_start_seek_continuation to rq issue path
ide-cd: fold cdrom_start_seek into ide_cd_do_request
ide-cd: simplify request issuing path
ide-cd: mv ide_do_rw_cdrom ide_cd_do_request
ide-cd: cdrom_start_seek: remove unused argument block
ide-cd: ide_do_rw_cdrom: add the catch-all bad request case to the if-else block
...
* 'release-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-merge-2.6: (87 commits)
Fix FADT parsing
Add the ability to reset the machine using the RESET_REG in ACPI's FADT table.
ACPI: use dev_printk when possible
PNPACPI: add support for HP vendor-specific CCSR descriptors
PNP: avoid legacy IDE IRQs
PNP: convert resource options to single linked list
ISAPNP: handle independent options following dependent ones
PNP: remove extra 0x100 bit from option priority
PNP: support optional IRQ resources
PNP: rename pnp_register_*_resource() local variables
PNPACPI: ignore _PRS interrupt numbers larger than PNP_IRQ_NR
PNP: centralize resource option allocations
PNP: remove redundant pnp_can_configure() check
PNP: make resource assignment functions return 0 (success) or -EBUSY (failure)
PNP: in debug resource dump, make empty list obvious
PNP: improve resource assignment debug
PNP: increase I/O port & memory option address sizes
PNP: introduce pnp_irq_mask_t typedef
PNP: make resource option structures private to PNP subsystem
PNP: define PNP-specific IORESOURCE_IO_* flags alongside IRQ, DMA, MEM
...
Fail integrity check gracefully when request does not have a bio
attached (BLOCK_PC).
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (82 commits)
NFSv4: Remove BKL from the nfsv4 state recovery
SUNRPC: Remove the BKL from the callback functions
NFS: Remove BKL from the readdir code
NFS: Remove BKL from the symlink code
NFS: Remove BKL from the sillydelete operations
NFS: Remove the BKL from the rename, rmdir and unlink operations
NFS: Remove BKL from NFS lookup code
NFS: Remove the BKL from nfs_link()
NFS: Remove the BKL from the inode creation operations
NFS: Remove BKL usage from open()
NFS: Remove BKL usage from the write path
NFS: Remove the BKL from the permission checking code
NFS: Remove attribute update related BKL references
NFS: Remove BKL requirement from attribute updates
NFS: Protect inode->i_nlink updates using inode->i_lock
nfs: set correct fl_len in nlmclnt_test()
SUNRPC: Support registering IPv6 interfaces with local rpcbind daemon
SUNRPC: Refactor rpcb_register to make rpcbindv4 support easier
SUNRPC: None of rpcb_create's callers wants a privileged source port
SUNRPC: Introduce a specific rpcb_create for contacting localhost
...
David S. Miller
Sam Ravnborg
Adrian Bunk
Linus Torvalds
Rusty Russell
Jan Glauber
Roland McGrath
Martin K. Petersen
Aaron Durbin