Commit Graph

45137 Commits

Author SHA1 Message Date
David S. Miller 87eb367003 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/wireless/iwlwifi/iwl-6000.c
	net/core/dev.c
2010-04-21 01:14:25 -07:00
Linus Torvalds ac8bf56430 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Fix hardirq tracing in trap return path.
  sparc64: Use correct pt_regs in decode_access_size() error paths.
  sparc64: Fix PREEMPT_ACTIVE value.
  sparc64: Run NMIs on the hardirq stack.
  sparc64: Allocate sufficient stack space in ftrace stubs.
  sparc: Fix forgotten kmemleak headers inclusion
2010-04-20 09:20:55 -07:00
Linus Torvalds 34388d1c4f Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Fix unsafe frame rewinding with hot regs fetching
2010-04-20 09:20:23 -07:00
Christoph Hellwig 4cecd935f6 x86: correctly wire up the newuname system call
Before commit e28cbf2293 ("improve
sys_newuname() for compat architectures") 64-bit x86 had a private
implementation of sys_uname which was just called sys_uname, which other
architectures used for the old uname.

Due to some merge issues with the uname refactoring patches we ended up
calling the old uname version for both the old and new system call
slots, which lead to the domainname filed never be set which caused
failures with libnss_nis.

Reported-and-tested-by: Andy Isaacson <adi@hexapodia.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-20 09:17:21 -07:00
David S. Miller 28a1f533ae sparc64: Fix hardirq tracing in trap return path.
We can overflow the hardirq stack if we set the %pil here
so early, just let the normal control flow do it.

This is fine as we are allowed to do the actual IRQ enable
at any point after we call trace_hardirqs_on.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-20 00:48:37 -07:00
David S. Miller baa06775e2 sparc64: Use correct pt_regs in decode_access_size() error paths.
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-19 13:46:48 -07:00
Linus Torvalds eb3e5cce2b Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 5974/1: arm/mach-at91 Makefile: remove two blanks.
  ARM: 6052/1: kdump: make kexec work in interrupt context
  ARM: 6051/1: VFP: preserve the HW context when calling signal handlers
  ARM: 6050/1: VFP: fix the SMP versions of vfp_{sync,flush}_hwstate
  ARM: 6007/1: fix highmem with VIPT cache and DMA
  ARM: 5975/1: AT91 slow-clock suspend: don't wait when turning PLLs off
2010-04-19 07:26:21 -07:00
David S. Miller 6c94b1ee0c sparc64: Fix PREEMPT_ACTIVE value.
It currently overlaps the NMI bit.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-19 01:30:51 -07:00
Linus Torvalds dc57da3875 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/gart: Disable GART explicitly before initialization
  dma-debug: Cleanup for copy-loop in filter_write()
  x86/amd-iommu: Remove obsolete parameter documentation
  x86/amd-iommu: use for_each_pci_dev
  Revert "x86: disable IOMMUs on kernel crash"
  x86/amd-iommu: warn when issuing command to uninitialized cmd buffer
  x86/amd-iommu: enable iommu before attaching devices
  x86/amd-iommu: Use helper function to destroy domain
  x86/amd-iommu: Report errors in acpi parsing functions upstream
  x86/amd-iommu: Pt mode fix for domain_destroy
  x86/amd-iommu: Protect IOMMU-API map/unmap path
  x86/amd-iommu: Remove double NULL check in check_device
2010-04-15 12:20:56 -07:00
Linus Torvalds 7223b91542 Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest: stop using KVM hypercall mechanism
  lguest: workaround cmpxchg8b_emu by ignoring cli in the guest.
2010-04-14 18:44:29 -07:00
Geert Uytterhoeven b560177f3e m68k: Fix asm constraints for atomic_sub_and_test() and atomic_add_negative()
Recently, we started seeing this on allmodconfig builds:

  CC      mm/memcontrol.o
{standard input}: Assembler messages:
{standard input}:4076: Error: operands mismatch -- statement `subl 12(%fp),170(%a0)' ignored

Correct the asm constraint, like done for m68knommu.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-04-14 19:45:37 +02:00
Maxim Kuvyrkov 1aac4effad m68k: Fix `struct sigcontext' for ColdFire
LibSegFault uses piggybacks sc_fpstate field of the `struct sigcontext'
and this patch avoids LibSegFault overflowing this field.  Also this
removes an unnecessary divergence from classic m68k.

Signed-off-by: Maxim Kuvyrkov <maxim@codesourcery.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-04-14 19:45:37 +02:00
Rusty Russell 091ebf07a2 lguest: stop using KVM hypercall mechanism
This is a partial revert of 4cd8b5e2a1 "lguest: use KVM hypercalls";
we revert to using (just as questionable but more reliable) int $15 for
hypercalls.  I didn't revert the register mapping, so we still use the
same calling convention as kvm.

KVM in more recent incarnations stopped injecting a fault when a guest
tried to use the VMCALL instruction from ring 1, so lguest under kvm
fails to make hypercalls.  It was nice to share code with our KVM
cousins, but this was overreach.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Matias Zabaljauregui <zabaljauregui@gmail.com>
Cc: Avi Kivity <avi@redhat.com>
2010-04-14 21:43:56 +09:30
Ernst Schwab b1cdbb5f83 ARM: 5974/1: arm/mach-at91 Makefile: remove two blanks.
Cosmetic change to mach-at91 Makefile: remove two blanks introduced
by earlier patches.

Signed-off-by: Ernst Schwab <eschwab@online.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 11:22:44 +01:00
Mika Westerberg 3f2d4f561f ARM: 6052/1: kdump: make kexec work in interrupt context
When crash happens in interrupt context there is no userspace context.
We always use current->active_mm in those cases.

Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 11:11:31 +01:00
Imre Deak 82c6f5a5b3 ARM: 6051/1: VFP: preserve the HW context when calling signal handlers
From: Imre Deak <imre.deak@nokia.com>

Signal handlers can use floating point, so prevent them to corrupt
the main thread's VFP context. So far there were two signal stack
frame formats defined based on the VFP implementation, but the user
struct used for ptrace covers all posibilities, so use it for the
signal stack too.

Introduce also a new user struct for VFP exception registers. In
this too fields not relevant to the current VFP architecture are
ignored.

Support to save / restore the exception registers was added by
Will Deacon.

Signed-off-by: Imre Deak <imre.deak@nokia.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 11:11:30 +01:00
Imre Deak 5c5cac6385 ARM: 6050/1: VFP: fix the SMP versions of vfp_{sync,flush}_hwstate
From: Imre Deak <imre.deak@nokia.com>

Recently the UP versions of these functions were refactored and as
a side effect it became possible to call them for the current thread.
This isn't true for the SMP versions however, so fix this up.

Signed-off-by: Imre Deak <imre.deak@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 11:11:30 +01:00
Nicolas Pitre 7e5a69e83b ARM: 6007/1: fix highmem with VIPT cache and DMA
The VIVT cache of a highmem page is always flushed before the page
is unmapped.  This cache flush is explicit through flush_cache_kmaps()
in flush_all_zero_pkmaps(), or through __cpuc_flush_dcache_area() in
kunmap_atomic().  There is also an implicit flush of those highmem pages
that were part of a process that just terminated making those pages free
as the whole VIVT cache has to be flushed on every task switch. Hence
unmapped highmem pages need no cache maintenance in that case.

However unmapped pages may still be cached with a VIPT cache because the
cache is tagged with physical addresses.  There is no need for a whole
cache flush during task switching for that reason, and despite the
explicit cache flushes in flush_all_zero_pkmaps() and kunmap_atomic(),
some highmem pages that were mapped in user space end up still cached
even when they become unmapped.

So, we do have to perform cache maintenance on those unmapped highmem
pages in the context of DMA when using a VIPT cache.  Unfortunately,
it is not possible to perform that cache maintenance using physical
addresses as all the L1 cache maintenance coprocessor functions accept
virtual addresses only.  Therefore we have no choice but to set up a
temporary virtual mapping for that purpose.

And of course the explicit cache flushing when unmapping a highmem page
on a system with a VIPT cache now can go, which should increase
performance.

While at it, because the code in __flush_dcache_page() has to be modified
anyway, let's also make sure the mapped highmem pages are pinned with
kmap_high_get() for the duration of the cache maintenance operation.
Because kunmap() does unmap highmem pages lazily, it was reported by
Gary King <GKing@nvidia.com> that those pages ended up being unmapped
during cache maintenance on SMP causing segmentation faults.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 11:11:27 +01:00
Anders Larsen 317aa408d6 ARM: 5975/1: AT91 slow-clock suspend: don't wait when turning PLLs off
From: Julien Langer <julien.langer@gmail.com>

AT91: when turning off the PLLs during suspend, don't wait for the lock
flag to be set. Previously the code would always run into the loop
limitation of 1000 iterations because the flag is never set when turning
the PLLs off.

Comments from Anders Larsen:

 (in http://marc.info/?l=linux-kernel&m=127058929724193&w=2)

Signed-off-by: Julien Langer <julien.langer@gmail.com>
Signed-off-by: Anders Larsen <al@alarsen.net>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 11:08:43 +01:00
David S. Miller ec687886de sparc64: Run NMIs on the hardirq stack.
Otherwise we can overflow the main stack with the function tracer
enabled.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-14 02:04:29 -07:00
David S. Miller 035df35d96 sparc64: Allocate sufficient stack space in ftrace stubs.
128 bytes is sufficient for the register window save area, but the
calling conventions allow the callee to save up to 6 incoming argument
registers into the stack frame after the register window save area.

This means a minimal stack frame is 176 bytes (128 + (6 * 8)).

This fixes random crashes when using the function tracer.

Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13 18:59:02 -07:00
Frederic Weisbecker 2e2dc1d755 sparc: Fix forgotten kmemleak headers inclusion
Fix forgotten kmemleak headers inclusion for kmemleak_not_leak()
declaration.

This fixes the following build error:

	arch/sparc/kernel/irq_64.c: In function ‘sun4v_build_virq’:
	arch/sparc/kernel/irq_64.c:657: error: implicit declaration of function ‘kmemleak_not_leak’

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13 14:28:24 -07:00
Ingo Molnar 2b2f862ee6 Merge branch 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into x86/urgent 2010-04-13 13:24:54 +02:00
David S. Miller c011f80ba0 sparc64: Add some more commentary to __raw_local_irq_save()
Suggested by Peter Zijlstra

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13 01:50:43 -07:00
John Linn e44171f115 Add non-Virtex5 support for LL TEMAC driver
This patch adds support for using the LL TEMAC Ethernet driver on
non-Virtex 5 platforms by adding support for accessing the Soft DMA
registers as if they were memory mapped instead of solely through the
DCR's (available on the Virtex 5).

The patch also updates the driver so that it runs on the MicroBlaze.
The changes were tested on the PowerPC 440, PowerPC 405, and the
MicroBlaze platforms.

Signed-off-by: John Tyner <jtyner@cs.ucr.edu>
Signed-off-by: John Linn <john.linn@xilinx.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13 01:33:44 -07:00
David S. Miller 9343af084c Merge branch 'master' of /home/davem/src/GIT/linux-2.6/
Conflicts:
	lib/Kconfig.debug
2010-04-13 00:28:45 -07:00
David S. Miller e182c77cc2 sparc64: Fix memory leak in pci_register_iommu_region().
Found by kmemleak.

If request_resource() fails, we leak the struct resource we
allocated to represent the IOMMU mapping area.

This actually happens on sun4v machines because the IOMEM area is only
reported sans the IOMMU region, unlike all previous systems.  I'll
need to fix that at some point, but for now fix the leak.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-12 23:46:18 -07:00
David S. Miller 25ad403f67 sparc64: Add kmemleak annotation to sun4v_build_virq()
The only reference we store to this memory is in the form of a
physical address, so kmemleak can't see it.

Add a kmemleak_not_leak() annotation.

It's probably useful to be able to look at a dump of these things
either via debugfs or similar, and thus we could at some point store
them in some kind of table and therefore get rid of this annotation.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-12 23:46:17 -07:00
David S. Miller 8b8d8e2840 sparc64: Support kmemleak.
Only missing thing was an _sdata marker in vmlinux.lds.S

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-12 23:46:17 -07:00
David S. Miller 9960e9e894 sparc64: Add function graph tracer support.
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-12 22:37:26 -07:00
David S. Miller a71d1d6bb1 sparc64: Give a stack frame to the ftrace call sites.
It's the only way we'll be able to implement the function
graph tracer properly.

A positive is that we no longer have to worry about the
linker over-optimizing the tail call, since we don't
use a tail call any more.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-12 22:37:15 -07:00
David S. Miller daecbf58a5 sparc64: Use a seperate counter for timer interrupts and NMI checks, like x86.
This keeps us from having to use kstat_irqs_cpu() from the NMI handler,
the former of which is a profiled function.

Instead we use a currently empty slot in the cpu_data

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-12 22:37:07 -07:00
David S. Miller f8e8a8e8cb sparc64: Remove profiling from some low-level bits.
These include the timer implementation, perf events support, and the
performance counter register (pcr) programming layer.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-12 22:36:19 -07:00
David S. Miller d96478d5a2 sparc64: Kill unnecessary static on local var in ftrace_call_replace().
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-12 22:36:10 -07:00
David S. Miller ddacd0bc70 sparc64: Kill CONFIG_STACK_DEBUG code.
The generic stack tracer does this job just as well.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-12 22:36:03 -07:00
David S. Miller 63b7549573 sparc64: Add HAVE_FUNCTION_TRACE_MCOUNT_TEST and tidy up.
Check function_trace_stop at ftrace_caller

Toss mcount_call and dummy call of ftrace_stub, unnecessary.

Document problems we'll have if the final kernel image link
ever turns on relaxation.

Properly size 'ftrace_call' so it looks right when inspecting
instructions under gdb et al.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-12 22:35:24 -07:00
David S. Miller 0c25e9e6cb sparc64: Adjust __raw_local_irq_save() to cooperate in NMIs.
If we are in an NMI then doing a plain raw_local_irq_disable() will
write PIL_NORMAL_MAX into %pil, which is lower than PIL_NMI, and thus
we'll re-enable NMIs and recurse.

Doing a simple:

	%pil = %pil | PIL_NORMAL_MAX

does what we want, if we're already at PIL_NMI (15) we leave it at
that setting, else we set it to PIL_NORMAL_MAX (14).

This should get the function tracer working on sparc64.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-12 22:21:52 -07:00
David S. Miller cb256aa604 sparc64: Use kstack_valid() in die_if_kernel().
This gets rid of a local function (is_kernel_stack()) which tries to
do the same thing, yet poorly in that it doesn't handle IRQ stacks
properly.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-12 22:16:22 -07:00
Linus Torvalds 50b88c46f0 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (21 commits)
  ARM: Fix ioremap_cached()/ioremap_wc() for SMP platforms
  ARM: 6043/1: AT91 slow-clock resume: Don't wait for a disabled PLL to lock
  ARM: 6031/1: fix Thumb-2 decompressor
  ARM: 6029/1: ep93xx: gpio.c: local functions should be static
  ARM: 6028/1: ARM: add MAINTAINERS for U300
  ARM: 6024/1: bcmring: fix missing down on semaphore in dma.c
  MXC: mach_armadillo5x0: Add USB Host support.
  ARM mach-mx3: duplicated include
  ARM mach-mx3: duplicated include
  imx31: add watchdog device on litekit board.
  imx3: Add watchdog platform device support
  MXC: mach-mx31_3ds: add support for freescale mc13783 power management device.
  MXC: mach-mx31_3ds: Add SPI1 device support.
  MXC: mach-mx31_3ds: Add support for on board NAND Flash.
  MXC: mach-mx31_3ds: Update variable names over recent mach name modification.
  imx31: fix parent clock for rtc
  i.MX51: remove NFC AXI static mapping
  i.MX51: determine silicon revision dynamically
  i.MX51: map TZIC dynamically
  i.MX51: Use correct clock for gpt
  ...
2010-04-12 18:37:34 -07:00
David Daney f6be75d03c MIPS: Calculate proper ebase value for 64-bit kernels
The ebase is relative to CKSEG0 not CAC_BASE.  On a 32-bit kernel they
are the same thing, for a 64-bit kernel they are not.

It happens to kind of work on a 64-bit kernel as they both reference
the same physical memory.  However since the CPU uses the CKSEG0 base,
determining if a J instruction will reach always gives the wrong result
unless we use the same number the CPU uses.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1093/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12 17:26:22 +01:00
Manuel Lauss d8000beef2 MIPS: Alchemy: DB1200: Remove custom wait implementation
While playing with the out-of-tree MAE driver module, the system would
panic after a while in the db1200 custom wait code after wakeup due to
a clobbered k0 register being used as target address of a store op.

Remove the custom wait implementation and revert back to the Alchemy-
recommended implementation already set as default.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1092/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12 17:26:22 +01:00
Ralf Baechle 2844e49f5e MIPS: Big Sur: Make defconfig more useful.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12 17:26:22 +01:00
Anton Altaparmakov 7b3e543ddb MIPS: Fix __vmalloc() etc. on MIPS for non-GPL modules
Commit b3594a089f1c17ff919f8f78505c3f20e1f6f8ce (lmo) rsp.
351336929c (kernel.org) break non-GPL modules
that use __vmalloc() or any of the vmap(), vm_map_ram(), etc functions on
MIPS.

All those functions are EXPORT_SYMBOL() so are meant to be allowed to be
used by non-GPL kernel modules.  These calls all take page protection as
an argument which is normally a constant like PAGE_KERNEL.

This commit causes all protection constants like PAGE_KERNEL to not be
constants and instead to contain the GPL-only symbol _page_cachable_default.

This means that all calls to __vmalloc(), vmap(), etc, cause non-GPL
modules to fail to link with the complaint that they are trying to use the
GPL-only symbol _page_cachable_default...

Change EXPORT_SYMBOL_GPL(_page_cachable_default) to EXPORT_SYMBOL() for
non-GPL modules that call __vmalloc(), vmap(), vm_map_ram() etc.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
Cc: Chris Dearman <chris@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: http://patchwork.linux-mips.org/patch/1084/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12 17:26:21 +01:00
Ralf Baechle 3d45285dd1 MIPS: Sibyte: Fix M3 TLB exception handler workaround.
The M3 workaround needs to cmpare the region and VPN2 fields only.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12 17:26:21 +01:00
Florian Fainelli 5e3644a95d MIPS: BCM63xx: Fix build failure in board_bcm963xx.c
Since 2083e8327aeeaf818b0e4522a9d2539835c60423, the SPROM is now registered
in the board_prom_init callback, but it references variables and functions
which are declared below.  Move the variables and functions above
board_prom_init.

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1077/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12 17:26:20 +01:00
Ralf Baechle 5808184f1b MIPS: uasm: Add OR instruction.
This is needed for the fix of the M3 workaround.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12 17:26:20 +01:00
Ralf Baechle 8d9df29db2 MIPS: Sibyte: Apply M3 workaround only on affected chip types and versions.
Previously it was unconditionally used on all Sibyte family SOCs.  The
M3 bug has to be handled in the TLB exception handler which is extremly
performance sensitive, so this modification is expected to deliver around
2-3% performance improvment.  This is important as required changes to the
M3 workaround will make it more costly.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12 17:26:19 +01:00
Maxime Bizon 9538ca636f MIPS: BCM63xx: Initialize gpio_out_low & out_high to current value at boot.
To avoid a glitch during GPIO initialisation read GPIO output register
values left by the firmware.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/903/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12 17:26:19 +01:00
Florian Fainelli e23a90eb73 MIPS: BCM63xx: Register SSB SPROM fallback in board's first stage callback
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
To: Maxime Bizon <mbizon@freebox.fr>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1017/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12 17:26:18 +01:00
Maxime Bizon 4fe67e44a0 MIPS: BCM63xx: Fix typo in cpu-feature-overrides file.
Fix typo: CONFIG_BCMCPU_IS_63xx does not exist;
CONFIG_BCM63XX_CPU_63xx is the valid config option.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
To: linux-mips@linux-mips.org
Cc: Maxime Bizon <mbizon@freebox.fr>
Patchwork: http://patchwork.linux-mips.org/patch/901/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12 17:26:18 +01:00