Commit Graph

13 Commits

Author SHA1 Message Date
Maxime Ripard 3353652ce0 clocksource: sun4i: remove IRQF_DISABLED
IRQF_DISABLED is a no-op nowadays, so we can safely remove it.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-10-22 22:36:50 +02:00
Maxime Ripard 12e1480bcb clocksource: sun4i: Report the minimum tick that we can program
We need to wait for at least 2 clock cycles whenever we reprogram our
clockevent timer. Report that the minimum number of ticks we can handle
is 3 ticks, and remove 3 ticks to the interval programmed to reflect
this.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-10-22 22:36:43 +02:00
Maxime Ripard 7e14183469 clocksource: sun4i: Fix bug when switching from periodic to oneshot modes
The interval was firing at was set up at probe time, and only changed in
the set_next_event, and never changed back, which is not really what is
expected.

When enabling the periodic mode, now set an interval to tick every
jiffy.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-07-18 15:27:21 +02:00
Maxime Ripard a2c49e7b55 clocksource: sun4i: Cleanup parent clock setup
The current bring-up code for the timer was overly complicated. The only
thing we need is actually which clock we want to use as source and
that's pretty much all. Let's keep it that way.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-07-18 15:27:20 +02:00
Maxime Ripard c2b852f77b clocksource: sun4i: Remove TIMER_SCAL variable
The prescaler is only used when using the internal low frequency
oscillator (at 32kHz). Since we're using the higher frequency oscillator
at 24MHz, we can just remove it.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-07-18 15:27:19 +02:00
Maxime Ripard 96651a0732 clocksource: sun4i: Factor out some timer code
The set_next_event and set_mode callbacks share a lot of common code we
can easily factor to avoid duplication and mistakes.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-07-18 15:27:18 +02:00
Maxime Ripard 63d88f1ac7 clocksource: sun4i: Fix the next event code
The next_event logic was setting the next interval to fire in the
current timer value instead of the interval value register, which is
obviously wrong.

Plus, the logic to set the actual value was wrong as well: the interval
register can only be modified when the timer is disabled, and then
enable it back, otherwise, it'll have no effect. Fix this logic as well
since that code couldn't possibly work.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-07-18 15:27:17 +02:00
Maxime Ripard 8c31bec28b clocksource: sun4i: Don't forget to enable the clock we use
Even if in our case, this clock was non-gatable, used as a parent clock
for several IPs, it still is a good idea to enable it.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-07-18 15:27:16 +02:00
Maxime Ripard 137c6b3c7c clocksource: sun4i: Add clocksource and sched clock drivers
Use the second timer found on the Allwinner SoCs as a clock source and
sched clock, that were both not used yet on these platforms.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-07-18 15:27:15 +02:00
Maxime Ripard 9eded23215 clocksource: sun4i: rename AUTORELOAD define to RELOAD
The name AUTORELOAD was actually pretty bad since it doesn't make the
register reload the previous interval when it expires, but setting this
value pushes the new programmed interval to the internal timer counter.
Rename it to RELOAD instead.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-07-18 15:27:14 +02:00
Maxime Ripard bb008b9e87 clocksource: sun4i: Wrap macros arguments in parenthesis
The macros were not using parenthesis to escape the arguments passed to
them. It is pretty unsafe, so add those parenthesis.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-07-18 15:27:13 +02:00
Maxime Ripard 40777645eb clocksource: sun4i: Use the BIT macros where possible
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-07-18 15:27:12 +02:00
Maxime Ripard 119fd635e3 clocksource: sunxi: Rename sunxi to sun4i
During the introduction of the Allwinner SoC platforms, sunxi was
initially meant as a generic name for all the variants of the Allwinner
SoC.

It was ok at the time of the support of only the A10 and A13 that
looks pretty much the same, but it's beginning to be troublesome with
the future addition of the Allwinner A31 (sun6i) that is quite
different, and would introduce some weird logic, where sunxi would
actually mean in some case sun4i and sun5i but without sun6i...

Moreover, it makes the compatible strings naming scheme not consistent
with other architectures, where usually for this kind of compability, we
just use the oldest SoC name that has this IP, so let's do just this.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-04-08 21:42:11 +02:00