Commit Graph

4425 Commits

Author SHA1 Message Date
Linus Torvalds b19d69c72d USB fixes for 3.13-rc3
Here are a bunch of USB fixes for 3.13-rc3.
 
 Nothing major, but we seem to have an argument about a XHCI fix, so I'm not
 including a revert that Sarah requested, because that breaks a USB network
 driver, and I can't revert the USB network driver fix without reintroducing
 other bugs that it fixed.  So as it is, everything should now be
 working.  Worse case, I can revert the XHCI fix before 3.13-final is
 out, but it seems to work well here with my testing, so all should be
 good.
 
 Other than that, some driver updates based on reports.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iEYEABECAAYFAlKiEuYACgkQMUfUDdst+ymE8ACgnDT8s4FtrYfoyOo5K4TVTRaZ
 S2wAn3+Xa2TX1Sym+ltJry7N1jRnY2Qy
 =JUaB
 -----END PGP SIGNATURE-----

Merge tag 'usb-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a bunch of USB fixes for 3.13-rc3.

  Nothing major, but we seem to have an argument about a XHCI fix, so
  I'm not including a revert that Sarah requested, because that breaks a
  USB network driver, and I can't revert the USB network driver fix
  without reintroducing other bugs that it fixed.  So as it is,
  everything should now be working.  Worse case, I can revert the XHCI
  fix before 3.13-final is out, but it seems to work well here with my
  testing, so all should be good.

  Other than that, some driver updates based on reports"

* tag 'usb-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
  usb: hub: Use correct reset for wedged USB3 devices that are NOTATTACHED
  usb: ohci-pxa27x: include linux/dma-mapping.h
  USB: cdc-acm: Added support for the Lenovo RD02-D400 USB Modem
  usb: tools: fix a regression issue that gcc can't link to pthread
  USB: switch maintainership of chipidea to Peter
  USB: pl2303: fixed handling of CS5 setting
  USB: ftdi_sio: fixed handling of unsupported CSIZE setting
  USB: mos7840: correct handling of CS5 setting
  USB: spcp8x5: correct handling of CS5 setting
  usb: wusbcore: fix deadlock in wusbhc_gtk_rekey
  usb: wusbcore: do device lookup while holding the hc mutex
  usb: wusbcore: send keepalives to unauthenticated devices
  USB: option: support new huawei devices
  USB: serial: option: blacklist interface 1 for Huawei E173s-6
  usb: xhci: Link TRB must not occur within a USB payload burst
  usb: gadget: f_mass_storage: call try_to_freeze only when its safe
  usb: gadget: tcm_usb_gadget: mark bot_cleanup_old_alt static
  usb: gadget: ffs: fix sparse warning
  usb: gadget: zero: module parameters can be static
  usb: gadget: storage: fix sparse warning
  ...
2013-12-08 18:46:32 -08:00
Huang Rui cb292ce222 usb: tools: fix a regression issue that gcc can't link to pthread
Reproduce:
ray@hr-bak:~/usb$ make -C tools/usb/
make: Entering directory `/home/ray/usb/tools/usb'
gcc -Wall -Wextra -g -lpthread -I../include -o testusb testusb.c
/tmp/cc0EMxfy.o: In function `main':
/home/ray/usb/tools/usb/testusb.c:508: undefined reference to `pthread_create'
/home/ray/usb/tools/usb/testusb.c:531: undefined reference to `pthread_join'
collect2: error: ld returned 1 exit status
make: *** [testusb] Error 1
make: Leaving directory `/home/ray/usb/tools/usb'

Comments:
In the latest version (4.7.3) of gcc compiler, it requres that
libraries must follow the object or source files like below:

"gcc hello.c -lpthread" instead of "gcc -lpthread hello.c"

And it isn't encountered at gcc version 4.7.2.
So this patch fix to move the pthread option after testusb.c.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04 15:10:54 -08:00
Linus Torvalds e321ae4c20 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "Misc kernel and tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tools lib traceevent: Fix conversion of pointer to integer of different size
  perf/trace: Properly use u64 to hold event_id
  perf: Remove fragile swevent hlist optimization
  ftrace, perf: Avoid infinite event generation loop
  tools lib traceevent: Fix use of multiple options in processing field
  perf header: Fix possible memory leaks in process_group_desc()
  perf header: Fix bogus group name
  perf tools: Tag thread comm as overriden
2013-12-02 10:13:09 -08:00
Thomas Renninger f4a5d17efe tools: cpupower: fix wrong err msg not supported vs not available
idlestates in sysfs are counted from 0.

This fixes a wrong error message.
Current behavior on a machine with 4 sleep states is:

cpupower idle-set -e 4
Idlestate 4 enabled on CPU 0

-----Wrong---------------------
cpupower idle-set -e 5
Idlestate enabling not supported by kernel
-----Must and now will be -----
cpupower idle-set -e 5
Idlestate 6 not available on CPU 0
-------------------------------

cpupower idle-set -e 6
Idlestate 6 not available on CPU 0

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-25 23:10:50 +01:00
Thomas Renninger 5094d27171 tools: cpupower: Add cpupower-idle-set(1) manpage
The cpupower idle-set subcommand was introduce recently.
This patch provides the missing manpage.

If cpupower is properly installed it will show up automatically
(similar to git), when invoking:
cpupower help idle-set
or
cpupower idle-set --help

Some parts have been taken over and adjusted from
git commit 62d6ae880e
documentation submitted by Carsten Emde.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-25 23:10:50 +01:00
Linus Torvalds 82023bb7f7 More ACPI and power management updates for 3.13-rc1
- ACPI-based device hotplug fixes for issues introduced recently and
   a fix for an older error code path bug in the ACPI PCI host bridge
   driver.
 
 - Fix for recently broken OMAP cpufreq build from Viresh Kumar.
 
 - Fix for a recent hibernation regression related to s2disk.
 
 - Fix for a locking-related regression in the ACPI EC driver from
   Puneet Kumar.
 
 - System suspend error code path fix related to runtime PM and
   runtime PM documentation update from Ulf Hansson.
 
 - cpufreq's conservative governor fix from Xiaoguang Chen.
 
 - New processor IDs for intel_idle and turbostat and removal of
   an obsolete Kconfig option from Len Brown.
 
 - New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and
   ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg.
 
 - Removal of several ACPI video DMI blacklist entries that are not
   necessary any more from Aaron Lu.
 
 - Rework of the ACPI companion representation in struct device and
   code cleanup related to that change from Rafael J Wysocki,
   Lan Tianyu and Jarkko Nikula.
 
 - Fixes for assigning names to ACPI-enumerated I2C and SPI devices
   from Jarkko Nikula.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABCAAGBQJSjLYNAAoJEILEb/54YlRxkEQP/1pmFWNwSsxLtTHd+PEs0Xbo
 QccqvjQrnw/c8GcmK4eZrz6/xyuepmmjy9kfRKj2ENZniy0NEsSFqkTdSO3vYlva
 8HKWUj7MV3evhFERXAF6Tu0b4Enx4jOP7VMtmYxJo3qrSnKRUcUzc6DGv/ACsUT1
 Nkj0Lhdsg053Z+YzIXrl50w0tCDEMhVmWlMHBtYgr+dMNVnkfPBGkqMblMkKCXT2
 w/yHvauZlxQHtI+8bVqTuGgNN0CPzdlpFGiuUF+5mDf6dRX8zlSn56Ia+Wyw1k9X
 dQp4jYQOgPRo03rNKqQPDiPxUdc7T0RAHRvDB51Ncweuh5PfZGguQe71p6/LKY2W
 i6zblZ0f/vc13hTiMrP+qzKcwZvgPB5DH7SfnHr61JKV7GNFCdYAqoceS5hYMzR9
 d2Fd+txgm763IHWewXfDS/G2cU492R5qr4jpmUIACBQKWDZcqmSRDwRj83t56Ltb
 jgFBMbg4vZxG7IARhind74xsALxdhsgmFjPmx+0qPWjYxcU8otQZpXbgGNI9iOuW
 pxIQv5WPQW0tTmwO4HSuVCOwDPLPz5R0jkev7SvSj3Ek3TeD7He4LmnK055CATiC
 puq+6dp1FISPOPJYk+0DI61qN/CB/qNwRp8LU3ctZwudPVhznIE9FFQ3iN1FdBg2
 X8VDcT9t7VvVuxSBjgkj
 =QMp+
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI and power management updates from Rafael Wysocki:

 - ACPI-based device hotplug fixes for issues introduced recently and a
   fix for an older error code path bug in the ACPI PCI host bridge
   driver

 - Fix for recently broken OMAP cpufreq build from Viresh Kumar

 - Fix for a recent hibernation regression related to s2disk

 - Fix for a locking-related regression in the ACPI EC driver from
   Puneet Kumar

 - System suspend error code path fix related to runtime PM and runtime
   PM documentation update from Ulf Hansson

 - cpufreq's conservative governor fix from Xiaoguang Chen

 - New processor IDs for intel_idle and turbostat and removal of an
   obsolete Kconfig option from Len Brown

 - New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and
   ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg

 - Removal of several ACPI video DMI blacklist entries that are not
   necessary any more from Aaron Lu

 - Rework of the ACPI companion representation in struct device and code
   cleanup related to that change from Rafael J Wysocki, Lan Tianyu and
   Jarkko Nikula

 - Fixes for assigning names to ACPI-enumerated I2C and SPI devices from
   Jarkko Nikula

* tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
  PCI / hotplug / ACPI: Drop unused acpiphp_debug declaration
  ACPI / scan: Set flags.match_driver in acpi_bus_scan_fixed()
  ACPI / PCI root: Clear driver_data before failing enumeration
  ACPI / hotplug: Fix PCI host bridge hot removal
  ACPI / hotplug: Fix acpi_bus_get_device() return value check
  cpufreq: governor: Remove fossil comment in the cpufreq_governor_dbs()
  ACPI / video: clean up DMI table for initial black screen problem
  ACPI / EC: Ensure lock is acquired before accessing ec struct members
  PM / Hibernate: Do not crash kernel in free_basic_memory_bitmaps()
  ACPI / AC: Remove struct acpi_device pointer from struct acpi_ac
  spi: Use stable dev_name for ACPI enumerated SPI slaves
  i2c: Use stable dev_name for ACPI enumerated I2C slaves
  ACPI: Provide acpi_dev_name accessor for struct acpi_device device name
  ACPI / bind: Use (put|get)_device() on ACPI device objects too
  ACPI: Eliminate the DEVICE_ACPI_HANDLE() macro
  ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_node
  cpufreq: OMAP: Fix compilation error 'r & ret undeclared'
  PM / Runtime: Fix error path for prepare
  PM / Runtime: Update documentation around probe|remove|suspend
  cpufreq: conservative: set requested_freq to policy max when it is over policy max
  ...
2013-11-20 13:25:04 -08:00
Arnaldo Carvalho de Melo 6b5fa0ba4f tools lib traceevent: Fix conversion of pointer to integer of different size
gcc complaint on 32-bit system:

  /home/acme/git/linux/tools/lib/traceevent/event-parse.c: In function ‘eval_num_arg’:
  /home/acme/git/linux/tools/lib/traceevent/event-parse.c:3468:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]

This is because the eval_num_arg returns everything as an 'unsigned long long',
so it converts a void pointer to a wider integer, fix it by converting the void
pointer to an integer of the same size, 'unsigned long', before casting it to
'unsigned long long'.

Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-yllx4aqcg06v5n4vjpwiiuld@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-19 16:37:59 -03:00
Steven Rostedt eff2c92f86 tools lib traceevent: Fix use of multiple options in processing field
Jiri Olsa reported that the scsi_dispatch_cmd_done event failed to parse
with:

  Error: expected type 5 but read 4
  Error: expected type 5 but read 4

The problem is with this part of the print_fmt:

  __print_symbolic(((REC->result) >> 24) & 0xff, ...

The __print_symbolic() helper function's first parameter is the field to
use to determine what symbol to print based on the value of the result.
The parser can handle one operation, but it can not handle multiple
operations ('>>' and '&').

Add code to process all operations for the field argument for
__print_symbolic() as well as __print_flags().

Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131118142314.27ca334b@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-19 10:34:39 -03:00
Namhyung Kim 50a2740b83 perf header: Fix possible memory leaks in process_group_desc()
After processing all group descriptors or encountering an error, it
frees all descriptors.  However, current logic can leak memory since it
might not traverse all descriptors.

Note that the 'i' can have different value than nr_groups when an error
occurred and it's safe to call free(desc[i].name) for every desc since
we already make it NULL when it's reused for group names.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384741244-7271-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-19 10:34:05 -03:00
Namhyung Kim 210e812f03 perf header: Fix bogus group name
When processing event group descriptor in perf file header, we reuse an
allocated group name but forgot to prevent it from freeing.

Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384741244-7271-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-19 10:33:57 -03:00
Frederic Weisbecker a5285ad9e3 perf tools: Tag thread comm as overriden
The problem is that when a thread overrides its default ":%pid" comm, we
forget to tag the thread comm as overriden. Hence, this overriden comm
is not inherited on future forks. Fix it.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131116010207.GA18855@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-19 10:33:29 -03:00
Rafael J. Wysocki 6431b43097 Merge branch 'pm-tools'
* pm-tools:
  tools / power turbostat: Support Silvermont
2013-11-19 01:06:38 +01:00
Linus Torvalds dd3190ee81 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "Tooling changes only: it includes the ARM tooling fixlets, various
  other fixes, smaller updates, minor cleanups"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf record: Add an option to force per-cpu mmaps
  perf probe: Add '--demangle'/'--no-demangle'
  perf ui browser: Fix segfault caused by off by one handling END key
  perf symbols: Limit max callchain using max_stack on DWARF unwinding too
  perf evsel: Introduce perf_evsel__prev() method
  perf tools: Use perf_evlist__{first,last}, perf_evsel__next
  perf tools: Synthesize anon MMAP records again
  perf top: Add missing newline if the 'uid' is invalid
  perf tools: Remove trivial extra semincolon
  perf trace: Tweak summary output
  tools/perf/build: Fix feature-libunwind-debug-frame handling
  tools/perf/build: Fix timerfd feature check
2013-11-16 12:44:49 -08:00
Linus Torvalds b746f9c794 Nothing really exciting: some groundwork for changing virtio endian, and
some robustness fixes for broken virtio devices, plus minor tweaks.
 
 [vs last pull request: added the virtio-scsi broken vq escape patch, which
 I somehow lost.]
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSgDsJAAoJENkgDmzRrbjxEE4P/jXqZHS/HdlxW9k0BjKKlEIF
 PdtCoP3UhWTdskXvy2pD8m6nYn214MEJYUIa4HFlIEZsdxhuexzQHY19Ynkjagyv
 57sRsUUm5fYQLIL7IUh2DUD1VU38hUFinno/y333szzvCj9qITDA/QABsiWxK8NO
 dq+Lmeixgrhc5yN9iryW+gZV+hekJIZ4LsU5ejSaJucKblzXUH8qIbmSthG7RTYJ
 tr4J7xTTXbhxY4CoC5Dpx2hvsFkvzaAIvI4Nr1mDjfq5cR8BaYvnC89U1IbhdAey
 p1AbZE58JLrY+Z8K8LBRGV2KjO8qSZ6R47hbZ9nAnodJYB7sZLyj6jUe1q+/htuC
 Dh9Xm9O4eW2xNaFk20dYeIF4UU5/HzdsbvG/IlH8x4sm8/K706ocYyAOHlzYUg2T
 k7gltrgDzDokMgb2R44gwnr4oaJ2q8Gne6JXswlPEv2eRs6vNnA5Xhc0rEHGkU6C
 gYn1vNFN6yx0vf2syG/Ce5pZtMxGpefKQkHzzWdq8FKr1B9s54dDuf2hls7J8A9t
 OQT1gE33yURSelf4Kh4k9zWXaWk/Ohv9l2R1cqpALnJ4/+q0fP5t7HdK500S7aax
 DxLeFeqvsBw7nlWgsGxQmt+fjITQFHhcDiwst0ehnt6RbDEW7XPIguz0K/gyhxYG
 +UNbl/5Gr64jnUX3YCzm
 =vY2L
 -----END PGP SIGNATURE-----

Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull virtio updates from Rusty Russell:
 "Nothing really exciting: some groundwork for changing virtio endian,
  and some robustness fixes for broken virtio devices, plus minor
  tweaks"

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio_scsi: verify if queue is broken after virtqueue_get_buf()
  x86, asmlinkage, lguest: Pass in globals into assembler statement
  virtio: mmio: fix signature checking for BE guests
  virtio_ring: adapt to notify() returning bool
  virtio_net: verify if queue is broken after virtqueue_get_buf()
  virtio_console: verify if queue is broken after virtqueue_get_buf()
  virtio_blk: verify if queue is broken after virtqueue_get_buf()
  virtio_ring: add new function virtqueue_is_broken()
  virtio_test: verify if virtqueue_kick() succeeded
  virtio_net: verify if virtqueue_kick() succeeded
  virtio_ring: let virtqueue_{kick()/notify()} return a bool
  virtio_ring: change host notification API
  virtio_config: remove virtio_config_val
  virtio: use size-based config accessors.
  virtio_config: introduce size-based accessors.
  virtio_ring: plug kmemleak false positive.
  virtio: pm: use CONFIG_PM_SLEEP instead of CONFIG_PM
2013-11-15 13:28:47 +09:00
Adrian Hunter 539e6bb71e perf record: Add an option to force per-cpu mmaps
By default, when tasks are specified (i.e. -p, -t or -u options)
per-thread mmaps are created.

Add an option to override that and force per-cpu mmaps.

Further comments by peterz:

So this option allows -t/-p/-u to create one buffer per cpu and attach
all the various thread/process/user tasks' their counters to that one
buffer?

As opposed to the current state where each such counter would have its
own buffer.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1383313899-15987-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-14 16:10:27 -03:00
Azat Khuzhin 35e17b2450 perf probe: Add '--demangle'/'--no-demangle'
You can't pass demangled name into "perf probe", because of special chars:
./perf probe -f -x /tmp/a.out 'foo(int)'
Semantic error :There is non-digit char in line number.

And you can't even pass without demangling (because it search symbol in
DSO with demangle=true):
./perf probe -f -x /tmp/a.out _Z3fooi
no symbols found in /tmp/a.out, maybe install a debug package?

However:
nm /tmp/a.out | grep foo
000000000040056d T _Z3fooi

After this patch, using the next command:
./perf probe -f --no-demangle -x /tmp/a.out _Z3fooi

probe will be successfully added.

Signed-off-by: Azat Khuzhin <a3at.mail@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1382947464-31266-1-git-send-email-a3at.mail@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-14 16:06:28 -03:00
Arnaldo Carvalho de Melo 48d038fcd0 perf ui browser: Fix segfault caused by off by one handling END key
$ perf record ls
$ perf report

Press 'down enter end'

Result:

Program received signal SIGSEGV, Segmentation fault.

The UI browser, used on a argv array would access past the end of the
array on SEEK_END because it wasn't using 'nr_entries - 1', fix it.

Reported-by: v.karpov@samsung.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=59291
Link: http://lkml.kernel.org/n/tip-3g83ipasqi219ktv764xzzjs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-14 16:00:31 -03:00
Arnaldo Carvalho de Melo 37676af15c perf symbols: Limit max callchain using max_stack on DWARF unwinding too
It was affecting only frame-pointer (fp) based callchain processing.

Usage example:

  perf top --call-graph dwarf,1024 --max-stack 2

Works for any tool that does callchain resolving and provides a
--max-stack option.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Link: http://lkml.kernel.org/n/tip-eu45v8s3tq9ruay8tpfyon79@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-14 16:00:23 -03:00
Arnaldo Carvalho de Melo d87fcb4a2d perf evsel: Introduce perf_evsel__prev() method
Just one use so far, on the hists browser, for completeness since there
we use perf_evlist__{first,last} and perf_evsel__next() for handling the
TAB and UNTAB keys.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-d09l4lejp5427enuf3igpckw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-14 16:00:16 -03:00
Arnaldo Carvalho de Melo 9a354cdc2f perf tools: Use perf_evlist__{first,last}, perf_evsel__next
In a few remaining places where the equivalent open coded variant was
still being used.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4vjnloi5fisilykwxalb5nel@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-14 16:00:10 -03:00
Don Zickus 9d4ecc8893 perf tools: Synthesize anon MMAP records again
When introducing the PERF_RECORD_MMAP2 in:

5c5e854bc7 perf tools: Add attr->mmap2 support

A check for the number of entries parsed by sscanf was introduced that
assumed all of the 8 fields needed to be correctly parsed so that
particular /proc/pid/maps line would be considered synthesizable.

That broke anon records synthesizing, as it doesn't have the 'execname'
field.

Fix it by keeping the sscanf return check, changing it to not require
that the 'execname' variable be parsed, so that the preexisting logic
can kick in and set it to '//anon'.

This should get things like JIT profiling working again.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Bill Gray <bgray@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Richard Fowles <rfowles@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/n/tip-bo4akalno7579shpz29u867j@git.kernel.org
[ commit log message is mine, dzickus reported the problem with a patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-14 16:00:01 -03:00
Ingo Molnar ea432a8bb9 perf top: Add missing newline if the 'uid' is invalid
Add missing newline if the 'uid' is invalid:

  hubble:~> perf top --stdio -u help
  Error:
  Invalid User: helphubble:~>

Fixed by this patch:

  comet:~/tip/tools/perf> perf top --stdio -u help
  Error:
  Invalid User: help
  comet:~/tip/tools/perf>

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131112232609.GA31474@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-14 15:59:50 -03:00
Davidlohr Bueso b222213936 perf tools: Remove trivial extra semincolon
Accidentally ran into these, get rid of them.

Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Link: http://lkml.kernel.org/r/1384323864.2527.8.camel@buesod1.americas.hpqcorp.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-14 15:59:38 -03:00
Pekka Enberg 27a778b512 perf trace: Tweak summary output
Tweak the summary output as suggested by Ingo Molnar:

  [penberg@localhost ~]$ perf trace -a --duration 10000 --summary -- sleep 1
  ^C
   Summary of events:

   Xorg (817), 148 events, 0.0%, 0.000 msec

     syscall            calls      min       avg       max      stddev
                                 (msec)    (msec)    (msec)        (%)
     --------------- -------- --------- --------- ---------     ------
     read                   7     0.002     0.004     0.011     32.00%
     rt_sigprocmask        40     0.001     0.001     0.002      1.31%
     ioctl                  6     0.002     0.003     0.005     19.45%
     writev                 7     0.004     0.018     0.059     43.76%
     select                 9     0.000    74.513   507.869     74.61%
     setitimer              4     0.001     0.002     0.002     10.08%

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: http://lkml.kernel.org/r/1384345308-24404-1-git-send-email-penberg@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-14 15:59:20 -03:00
Ingo Molnar e310718d0e tools/perf/build: Fix feature-libunwind-debug-frame handling
Set feature-libunwind-debug-frame. We don't want it in
CORE_FEATURE_TESTS because it's not the generic case, but we
need to set it in the !feature-libunwind case.

Also, because x86 distributions typically don't have
dwarf_find_debug_frame() unwinding method:

  test-libunwind-debug-frame.c:(.text+0x31): undefined reference to `_Ux86_64_dwarf_find_debug_frame'

Restrict this new API to ARM for the time being.

With this patch test-all.c works again, so repeat perf builds
are  fast again:

  comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
  [...]

       0,452899660 seconds time elapsed                                          ( +-  0,11% )

While with before it was:

  comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
  [...]

       1,674001829 seconds time elapsed                                          ( +-  0,16% )

[ Includes fix to config/feature-checks/Makefile from Will Deacon. ]

Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Jean Pihet <jean.pihet@linaro.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-scsoctqzmou3rpkixCHezy9e@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-14 18:00:45 +01:00
Ingo Molnar bb4c5500c9 tools/perf/build: Fix timerfd feature check
'feature_timerfd' is checked all the time and calculated explicitly,
in a serial fashion. Add it to CORE_FEATURE_TESTS which causes it to
be built in parallel, using the newfangled parallel build autodetection
code.

This shaves 137 msecs off the perf build time on my system, which
speeds up the common case cached build by 43%:

Before:

  comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
  [...]
         0,453771441 seconds time elapsed                                          ( +-  0,09% )

After:

  comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
  [...]
         0,316290185 seconds time elapsed                                          ( +-  0,24% )

Cc: David Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-bb92CmexihopoSyqnkqepvsy@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-14 13:36:00 +01:00
Linus Torvalds fcd7476f9e Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "A number of fixes:

   - Fix segfault on perf trace -i perf.data, from Namhyung Kim.

   - Fix segfault with --no-mmap-pages, from David Ahern.

   - Don't force a refresh during progress update in the TUI, greatly
     reducing startup costs, fix from Patrick Palka.

   - Fix sw clock event period test wrt not checking if using >
     max_sample_freq.

   - Handle throttle events in 'object code reading' test, fix from
     Adrian Hunter.

   - Prevent condition that all sort keys are elided, fix from Namhyung
     Kim.

   - Round mmap pages to power 2, from David Ahern.

  And a number of late arrival changes:

   - Add summary only option to 'perf trace', suppressing the decoding
     of events, from David Ahern

   - 'perf trace --summary' formatting simplifications, from Pekka
     Enberg.

   - Beautify fifth argument of mmap() as fd, in 'perf trace', from
     Namhyung Kim.

   - Add direct access to dynamic arrays in libtraceevent, from Steven
     Rostedt.

   - Synthesize non-exec MMAP records when --data used, allowing the
     resolution of data addresses to symbols (global variables, etc), by
     Arnaldo Carvalho de Melo.

   - Code cleanups by David Ahern and Adrian Hunter"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  tools lib traceevent: Add direct access to dynamic arrays
  perf target: Shorten perf_target__ to target__
  perf tests: Handle throttle events in 'object code reading' test
  perf evlist: Refactor mmap_pages parsing
  perf evlist: Round mmap pages to power 2 - v2
  perf record: Fix segfault with --no-mmap-pages
  perf trace: Add summary only option
  perf trace: Simplify '--summary' output
  perf trace: Change syscall summary duration order
  perf tests: Compensate lower sample freq with longer test loop
  perf trace: Fix segfault on perf trace -i perf.data
  perf trace: Separate tp syscall field caching into init routine to be reused
  perf trace: Beautify fifth argument of mmap() as fd
  perf tests: Use lower sample_freq in sw clock event period test
  perf tests: Check return of perf_evlist__open sw clock event period test
  perf record: Move existing write_output into helper function
  perf record: Use correct return type for write()
  perf tools: Prevent condition that all sort keys are elided
  perf machine: Simplify synthesize_threads method
  perf machine: Introduce synthesize_threads method out of open coded equivalent
  ...
2013-11-14 16:56:32 +09:00
Ingo Molnar 555a098af6 Merge branch 'linus' into perf/urgent
Merge dependencies to apply a fix.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-14 08:28:30 +01:00
Linus Torvalds 549608eadb Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:
 "This time we only have a few changes as there are no soc thermal
  changes from Eduardo.  The only big change is the introduction of
  TMON, a tool to help visualize, tune, and test the thermal subsystem.
  The rest is mostly cleanups and fixes all over.

  Specifics:

   - introduce TMON, a tool base on thermal sysfs I/F.  It can be used
     to visualize, tune and test the thermal subsystem.

   - fix a zone/cooling device binding problem, when both thermal zone
     bind parameters and .bind() callback are available"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  tools/thermal: Introduce tmon, a tool for thermal subsystem
  thermal: Fix binding problem when there is thermal zone params
  thermal: cpu_cooling: fix return value check in cpufreq_cooling_register()
  Thermal: Check for validity before doing kfree
  thermal/intel_powerclamp: Add newer CPU models
  Thermal: Tidy up error handling in powerclamp_init
  thermal: Kconfig: cosmetic fixes
  ACPI/thermal : Remove zone disabled warning
  typo in drivers/thermal/Kconfig: lpatform instead of platform
2013-11-14 14:42:31 +09:00
Linus Torvalds f47671e2d8 Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM updates from Russell King:
 "Included in this series are:

   1. BE8 (modern big endian) changes for ARM from Ben Dooks
   2. big.Little support from Nicolas Pitre and Dave Martin
   3. support for LPAE systems with all system memory above 4GB
   4. Perf updates from Will Deacon
   5. Additional prefetching and other performance improvements from Will.
   6. Neon-optimised AES implementation fro Ard.
   7. A number of smaller fixes scattered around the place.

  There is a rather horrid merge conflict in tools/perf - I was never
  notified of the conflict because it originally occurred between Will's
  tree and other stuff.  Consequently I have a resolution which Will
  forwarded me, which I'll forward on immediately after sending this
  mail.

  The other notable thing is I'm expecting some build breakage in the
  crypto stuff on ARM only with Ard's AES patches.  These were merged
  into a stable git branch which others had already pulled, so there's
  little I can do about this.  The problem is caused because these
  patches have a dependency on some code in the crypto git tree - I
  tried requesting a branch I can pull to resolve these, and all I got
  each time from the crypto people was "we'll revert our patches then"
  which would only make things worse since I still don't have the
  dependent patches.  I've no idea what's going on there or how to
  resolve that, and since I can't split these patches from the rest of
  this pull request, I'm rather stuck with pushing this as-is or
  reverting Ard's patches.

  Since it should "come out in the wash" I've left them in - the only
  build problems they seem to cause at the moment are with randconfigs,
  and since it's a new feature anyway.  However, if by -rc1 the
  dependencies aren't in, I think it'd be best to revert Ard's patches"

I resolved the perf conflict roughly as per the patch sent by Russell,
but there may be some differences.  Any errors are likely mine.  Let's
see how the crypto issues work out..

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits)
  ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h"
  ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg().
  ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h
  ARM: 7871/1: amba: Extend number of IRQS
  ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise()
  ARM: 7872/1: Support arch_irq_work_raise() via self IPIs
  ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode
  ARM: 7878/1: nommu: Implement dummy early_paging_init()
  ARM: 7876/1: clear Thumb-2 IT state on exception handling
  ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}()
  ARM: footbridge: fix build warnings for netwinder
  ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu
  ARM: fix misplaced arch_virt_to_idmap()
  ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown
  ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation
  ARM: 7869/1: remove unused XSCALE_PMU Kconfig param
  ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t
  ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments
  ARM: 7862/1: pcpu: replace __get_cpu_var_uses
  ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code
  ...
2013-11-14 08:51:29 +09:00
Naoya Horiguchi 46c77e2bb0 tools/vm/page-types.c: support KPF_SOFTDIRTY bit
Soft dirty bit allows us to track which pages are written since the last
clear_ref (by "echo 4 > /proc/pid/clear_refs".) This is useful for
userspace applications to know their memory footprints.

Note that the kernel exposes this flag via bit[55] of /proc/pid/pagemap,
and the semantics is not a default one (scheduled to be the default in the
near future.) However, it shifts to the new semantics at the first
clear_ref, and the users of soft dirty bit always do it before utilizing
the bit, so that's not a big deal.  Users must avoid relying on the bit in
page-types before the first clear_ref.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:07 +09:00
Len Brown 144b44b135 tools / power turbostat: Support Silvermont
Support the next generation Intel Atom processor
mirco-architecture, formerly called Silvermont.

The server version, formerly called "Avoton",
is named the "Intel(R) Atom(TM) Processor C2000 Product Family".

The client version, formerly called "Bay Trail",
is named the "Intel Atom Processor Z3000 Series",
as well as various "Intel Pentium Processor"
and "Intel Celeron Processor" brands, depending
on form-factor.

Silvermont has a set of MSRs not far off from NHM,
but the RAPL register set is a sub-set of those previously supported.

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-12 23:16:02 +01:00
Ingo Molnar d969135aae perf/core improvements and fixes:
. Add summary only option to 'perf trace', suppressing the decoding of
   events, from David Ahern
 
 . 'perf trace --summary' formatting simplifications, from Pekka Emberg.
 
 . Beautify fifth argument of mmap() as fd, in 'perf trace', from Namhyung Kim.
 
 . Fix segfault on perf trace -i perf.data, from Namhyung Kim.
 
 . Fix segfault with --no-mmap-pages, from David Ahern.
 
 . Round mmap pages to power 2, from David Ahern.
 
 . Add direct access to dynamic arrays in libtraceevent, from Steven Rostedt.
 
 . Handle throttle events in 'object code reading' test, fix from Adrian Hunter.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSgpLxAAoJENZQFvNTUqpAABcQAKM3K/nN9UX8k7OHbr//tZLy
 8iio1zgSZLP5JGsX5RJIuqTjNrb/X0yOxvZTdWovFvb/FIc4VXinOHSdjKLGjs95
 n8/TpbCdoQkj1hjyfxIAna5SafexgJPknVNOo/ddKEsRNnl9MoX6to/Kmbm5Yuva
 remn92+XWR5qDF+zZ8SBqCtNTKPMqB8hWzRcrbeQzZb2bmWJVFcpsILvu5iD6KkY
 02ctJHvL9ueBq+gc3TEldRkbCyeDuWnki3BmAhqPN2ltlETyhfNPj6ZL80UY7qiv
 QNm9Aii+qfJc7x8jEc+OZw+lLtCtP6XiC4C1mHf7n5NiDuxt+q5uGwiCvYkXy87l
 QPsblq2CVJ3vmeAb7a0pR8FUhko07eA6Tp5Q8f1HVB2kojk872CvrNaL97FlefM0
 GmanD9z2STgk/BIxfNADYzmkPfyxIfjXswHvJ6ESeAMHiZ3lAW72BvrPYcsPzzMl
 VCI7SoP3tgkTGKgGhpi5bGqmyZnn6xr/LGT+VBOHDPTbvf7FHnuBwsP/TQ2q9jD3
 tlrLlGHZw/h3pdkYPMHMOH+Rlpiti861KRSd0rWY6Z2N6EzHRC35VA57lK18phi1
 Dya8JXMsQ9uxLglDvB9uvZ+queNZOL1CXtwDEMUV0tzd1SMJhsmuT5UCE+QFBUYI
 bh5pbnM84BxmsmXh0kXM
 =HiWt
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

  * Add summary only option to 'perf trace', suppressing the decoding of
    events, from David Ahern

  * 'perf trace --summary' formatting simplifications, from Pekka Emberg.

  * Beautify fifth argument of mmap() as fd, in 'perf trace', from Namhyung Kim.

  * Fix segfault on perf trace -i perf.data, from Namhyung Kim.

  * Fix segfault with --no-mmap-pages, from David Ahern.

  * Round mmap pages to power 2, from David Ahern.

  * Add direct access to dynamic arrays in libtraceevent, from Steven Rostedt.

  * Handle throttle events in 'object code reading' test, fix from Adrian Hunter.

  * Prevent condition that all sort keys are elided, fix from Namhyung Kim.

  * Synthesize non-exec MMAP records when --data used, allowing the resolution of
    data addresses to symbols (global variables, etc).

  * Don't force a refresh during progress update in the TUI, greatly reducing
    startup costs, fix from Patrick Palka.

  * Fix sw clock event period test wrt not checking if using > max_sample_freq.

  * Code cleanups by David Ahern and Adrian Hunter.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-12 21:48:38 +01:00
Steven Rostedt 0497a9ebaf tools lib traceevent: Add direct access to dynamic arrays
Jiri Olsa was writing a plugin for the cfg80211_tx_mlme_mgmt trace
event, and was not able to get the implemented function working.
The event's print fmt looks like:

   "netdev:%s(%d), ftype:0x%.2x", REC->name, REC->ifindex,
            __le16_to_cpup((__le16 *)__get_dynamic_array(frame))

As there's no helper function for __le16_to_cpup(), Jiri was creating one
with a plugin. But unfortunately, it would not work even though he set
up the plugin correctly.

The problem is that the function parameters do not handle the helper
function "__get_dynamic_array()", and that passes in a NULL pointer.

Adding PRINT_DYNAMIC_ARRAY direct support to eval_num_arg() allows the
use of __get_dynamic_array() in function parameters.

Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131111160810.0ba9df7d@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12 17:23:44 -03:00
Arnaldo Carvalho de Melo 602ad878d4 perf target: Shorten perf_target__ to target__
Getting unwieldly long, for this app domain should be descriptive enough
and the use of __ to separate the class from the method names should
help with avoiding clashes with other code bases.

Reported-by: David Ahern <dsahern@gmail.com>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20131112113427.GA4053@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12 16:51:03 -03:00
Adrian Hunter 48095b721c perf tests: Handle throttle events in 'object code reading' test
Unhandled events cause an error that fails the test, fix it.

Reported-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/5281DFE5.3000909@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12 16:37:54 -03:00
David Ahern 33c2dcfdfe perf evlist: Refactor mmap_pages parsing
Logic will be re-used for the out-pages argument for mmap based writes
in perf-record.

Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1384267617-3446-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12 16:33:22 -03:00
David Ahern 9639837e95 perf evlist: Round mmap pages to power 2 - v2
Currently perf requires the -m / --mmap_pages option to be a power of 2.

To be more user friendly perf should automatically round this up to the
next power of 2.

Currently:
  $ perf record -m 3 -a -- sleep 1
  --mmap_pages/-m value must be a power of two.sleep: Terminated

With patch:
  $ perf record -m 3 -a -- sleep 1
  rounding mmap pages size to 16384 (4 pages)
  ...

v2: Add bytes units to rounding message per Ingo's request. Other
    suggestions (e.g., prefixing INFO) should be addressed by wrapping
    pr_info to catch all instances.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1384267617-3446-3-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12 16:31:53 -03:00
David Ahern 8973504be7 perf record: Fix segfault with --no-mmap-pages
Adrian reported a segfault when using --no-out-pages:

$ tools/perf/perf record -vv --no-out-pages uname
Segmentation fault (core dumped)

The same occurs with --no-mmap-pages. Fix by checking that str is
non-NULL before parsing it.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1384267617-3446-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12 16:30:54 -03:00
David Ahern fd2eabaf16 perf trace: Add summary only option
Per request from Pekka make --summary a summary only option meaning do
not show the individual system calls. Add another option to see all
syscalls along with the summary. In addition use 's' and 'S' as
shortcuts for the options.

Requested-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Pekka Enberg <penberg@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/1384273875-3751-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12 16:24:38 -03:00
Pekka Enberg 99ff715054 perf trace: Simplify '--summary' output
The output of 'perf trace --summary' tries to be too cute with
formatting and makes it very hard to read.  Simplify it in the spirit of
"strace -c":

[penberg@localhost libtrading]$ perf trace -a --duration 10000 --summary -- sleep 1
^C
 Summary of events:

 dbus-daemon (555), 10 events, 0.0%, 0.000 msec

                                                    msec/call
   syscall            calls      min      avg      max stddev
   --------------- -------- -------- -------- -------- ------
   sendmsg                2    0.002    0.005    0.008  55.00
   recvmsg                2    0.002    0.003    0.005  44.00
   epoll_wait             1    0.000    0.000    0.000   0.00

 NetworkManager (667), 56 events, 0.0%, 0.000 msec

                                                    msec/call
   syscall            calls      min      avg      max stddev
   --------------- -------- -------- -------- -------- ------
   poll                   2    0.000    0.002    0.003 100.00
   sendmsg               10    0.004    0.007    0.016  15.41
   recvmsg               16    0.002    0.003    0.005   8.24

 zfs-fuse (669), 4 events, 0.0%, 0.000 msec

                                                    msec/call
   syscall            calls      min      avg      max stddev
   --------------- -------- -------- -------- -------- ------
   futex                  2    0.000    0.001    0.002 100.00

Signed-off-by: Pekka Enberg <penberg@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: http://lkml.kernel.org/r/1384267334-18953-1-git-send-email-penberg@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12 13:00:38 -03:00
Pekka Enberg 7f7a4138c6 perf trace: Change syscall summary duration order
Switch duration order to minimum, average, maximum for the '--summary'
command line option because it's more natural to read.

Signed-off-by: Pekka Enberg <penberg@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: http://lkml.kernel.org/r/1384265410-12344-1-git-send-email-penberg@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12 13:00:38 -03:00
Adrian Hunter 3fe2130523 perf tests: Compensate lower sample freq with longer test loop
Doesn't work for me:

./perf test -v 19
19: Test software clock events have valid period values    :
--- start ---
mmap size 528384B
mmap size 528384B
All (0) samples have period value of 1!
---- end ----
Test software clock events have valid period values: FAILED!

Compensate the lower freq introduced in 67c1e4a53b with a longer loop,

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/5281D3B8.2030104@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12 13:00:37 -03:00
Namhyung Kim 003824e8c2 perf trace: Fix segfault on perf trace -i perf.data
When replaying a previous record session, it'll get a segfault since it
doesn't initialize raw_syscalls enter/exit tracepoint's evsel->priv for
caching the format fields.

So fix it by properly initializing sys_enter/exit evsels that comes from
reading the perf.data file header.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384237500-22991-2-git-send-email-namhyung@kernel.org
[ Split the syscall tp field caching part in the previous patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12 13:00:37 -03:00
Namhyung Kim 96695d4402 perf trace: Separate tp syscall field caching into init routine to be reused
We need to set this in evsels coming out of a perf.data file header, not
just for new ones created for live sessions.

So separate the code that caches the syscall entry/exit tracepoint
format fields into a new function that will be used in the next
changeset.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20131112115700.GC4053@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12 13:00:36 -03:00
Namhyung Kim 73faab3a42 perf trace: Beautify fifth argument of mmap() as fd
The fifth argument of mmap syscall is fd and it often contains -1 as a
value for anon mappings.  Without this patch it doesn't show the file
name as well as it shows -1 as 4294967295.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384237500-22991-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12 13:00:23 -03:00
Russell King df762eccba Merge branch 'devel-stable' into for-next
Conflicts:
	arch/arm/include/asm/atomic.h
	arch/arm/include/asm/hardirq.h
	arch/arm/kernel/smp.c
2013-11-12 10:58:59 +00:00
Linus Torvalds 4b4d2b4634 H8/300 has been dead for several years, the kernel for it has
not compiled for ages, and recent versions of gcc for it are broken.
 Remove support for it.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJSev31AAoJEMsfJm/On5mBzSAQAKRBYLqtf3nJGm9pXGDhZPGG
 7KSQ8S11pg/wnXYW6P/XJhFRBrYkOOCeqVKQHtmxG8MmXQkkOz95rsIvBbUzU/FT
 yJAPKpOHdh1yLhBGgCj3WhGtjVwpbut1/y9n2M5SpGautUgxfLj9fJiswSJx0n7t
 VRWKwfIpBFPLPs9w6hdDf94tIXhSX8Me2gd3LDCPBEQ2SZYd8rtBasYtDeC2+FLa
 Xow4ZQrCU7hpYscSUFzJpok35hl7weGhJ9jjXwtic4byFHvdiyHUwCOaEWC0hqNi
 fOLWFbvBogqjyAktfZhfyL9R9/7lGlLshLQNmJWR3bO+nCJ21h9ATw0R4gLBdT4/
 lzLRnJ/4GdtbvmdqRxNjxxR4zHkZ+tE8HmaCmUzvqGfQyA5sJNBRrBDcWLUOVlO9
 0iIZsJBZjSQXKXSk9P5xH4G0tlbAFEUnEHKsrt/mgsD9Z3SgbPKAIWSBAJA0AMQk
 DXZaXrBRilXOPUCZASZfmK8AQFC1GYB0tz7nT4x1mjT2/JClgG2kHCAGhNmI+CbK
 l9VRIgBydppLFPOGhZLSNGQp29xBhw9JgOVns4a1k7kJQEw9ht38h8Q2ckRYxXhP
 /z53eZKMQk62quWlyLRgR9mWqZc2CIifLVdFjiOELMh7wKPwL6eGrrrGBDbPtctS
 PX5K26geb0oA3ZMjpBLr
 =V6n6
 -----END PGP SIGNATURE-----

Merge tag 'h8300-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull h8300 platform removal from Guenter Roeck:
 "The patch series has been in -next for more than one relase cycle.  I
  did get a number of Acks, and no objections.

  H8/300 has been dead for several years, the kernel for it has not
  compiled for ages, and recent versions of gcc for it are broken.
  Remove support for it"

* tag 'h8300-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  CREDITS: Add Yoshinori Sato for h8300
  fs/minix: Drop dependency on H8300
  Drop remaining references to H8/300 architecture
  Drop MAINTAINERS entry for H8/300
  watchdog: Drop references to H8300 architecture
  net/ethernet: Drop H8/300 Ethernet driver
  net/ethernet: smsc9194: Drop conditional code for H8/300
  ide: Drop H8/300 driver
  Drop support for Renesas H8/300 (h8300) architecture
2013-11-12 14:13:14 +09:00
Linus Torvalds ad5d69899e Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "As a first remark I'd like to note that the way to build perf tooling
  has been simplified and sped up, in the future it should be enough for
  you to build perf via:

        cd tools/perf/
        make install

  (ie without the -j option.) The build system will figure out the
  number of CPUs and will do a parallel build+install.

  The various build system inefficiencies and breakages Linus reported
  against the v3.12 pull request should now be resolved - please
  (re-)report any remaining annoyances or bugs.

  Main changes on the perf kernel side:

   * Performance optimizations:
      . perf ring-buffer code optimizations,          by Peter Zijlstra
      . perf ring-buffer code optimizations,          by Oleg Nesterov
      . x86 NMI call-stack processing optimizations,  by Peter Zijlstra
      . perf context-switch optimizations,            by Peter Zijlstra
      . perf sampling speedups,                       by Peter Zijlstra
      . x86 Intel PEBS processing speedups,           by Peter Zijlstra

   * Enhanced hardware support:
      . for Intel Ivy Bridge-EP uncore PMUs,          by Zheng Yan
      . for Haswell transactions,                     by Andi Kleen, Peter Zijlstra

   * Core perf events code enhancements and fixes by Oleg Nesterov:
      . for uprobes, if fork() is called with pending ret-probes
      . for uprobes platform support code

   * New ABI details by Andi Kleen:
      . Report x86 Haswell TSX transaction abort cost as weight

  Main changes on the perf tooling side (some of these tooling changes
  utilize the above kernel side changes):

   * 'perf report/top' enhancements:

      . Convert callchain children list to rbtree, greatly reducing the
        time taken for callchain processing, from Namhyung Kim.

      . Add new COMM infrastructure, further improving histogram
        processing, from Frédéric Weisbecker, one fix from Namhyung Kim.

      . Add /proc/kcore based live-annotation improvements, including
        build-id cache support, multi map 'call' instruction navigation
        fixes, kcore address validation, objdump workarounds.  From
        Adrian Hunter.

      . Show progress on histogram collapsing, that can take a long
        time, from Namhyung Kim.

      . Add --max-stack option to limit callchain stack scan in 'top'
        and 'report', improving callchain processing when reducing the
        stack depth is an option, from Waiman Long.

      . Add new option --ignore-vmlinux for perf top, from Willy
        Tarreau.

   * 'perf trace' enhancements:

      . 'perf trace' now can can use a 'perf probe' dynamic tracepoints
        to hook into the userspace -> kernel pathname copy so that it
        can map fds to pathnames without reading /proc/pid/fd/ symlinks.
        From Arnaldo Carvalho de Melo.

      . Show VFS path associated with fd in live sessions, using a
        'vfs_getname' 'perf probe' created dynamic tracepoint or by
        looking at /proc/pid/fd, from Arnaldo Carvalho de Melo.

      . Add 'trace' beautifiers for lots of syscall arguments, from
        Arnaldo Carvalho de Melo.

      . Implement more compact 'trace' output by suppressing zeroed
        args, from Arnaldo Carvalho de Melo.

      . Show thread COMM by default in 'trace', from Arnaldo Carvalho de
        Melo.

      . Add option to show full timestamp in 'trace', from David Ahern.

      . Add 'record' command in 'trace', to record raw_syscalls:*, from
        David Ahern.

      . Add summary option to dump syscall statistics in 'trace', from
        David Ahern.

      . Improve error messages in 'trace', providing hints about system
        configuration steps needed for using it, from Ramkumar
        Ramachandra.

      . 'perf trace' now emits hints as to why tracing is not possible,
        helping the user to setup the system to allow tracing in the
        desired permission granularity, telling if the problem is due to
        debugfs not being mounted or with not enough permission for
        !root, /proc/sys/kernel/perf_event_paranoit value, etc.  From
        Arnaldo Carvalho de Melo.

   * 'perf record' enhancements:

      . Check maximum frequency rate for record/top, emitting better
        error messages, from Jiri Olsa.

      . 'perf record' code cleanups, from David Ahern.

      . Improve write_output error message in 'perf record', from Adrian
        Hunter.

      . Allow specifying B/K/M/G unit to the --mmap-pages arguments,
        from Jiri Olsa.

      . Fix command line callchain attribute tests to handle the new
        -g/--call-chain semantics, from Arnaldo Carvalho de Melo.

   * 'perf kvm' enhancements:

      . Disable live kvm command if timerfd is not supported, from David
        Ahern.

      . Fix detection of non-core features, from David Ahern.

   * 'perf list' enhancements:

      . Add usage to 'perf list', from David Ahern.

      . Show error in 'perf list' if tracepoints not available, from
        Pekka Enberg.

   * 'perf probe' enhancements:

      . Support "$vars" meta argument syntax for local variables,
        allowing asking for all possible variables at a given probe
        point to be collected when it hits, from Masami Hiramatsu.

   * 'perf sched' enhancements:

      . Address the root cause of that 'perf sched' stack initialization
        build slowdown, by programmatically setting a big array after
        moving the global variable back to the stack.  Fix from Adrian
        Hunter.

   * 'perf script' enhancements:

      . Set up output options for in-stream attributes, from Adrian
        Hunter.

      . Print addr by default for BTS in 'perf script', from Adrian
        Juntmer

   * 'perf stat' enhancements:

      . Improved messages when doing profiling in all or a subset of
        CPUs using a workload as the session delimitator, as in:

         'perf stat --cpu 0,2 sleep 10s'

        from Arnaldo Carvalho de Melo.

      . Add units to nanosec-based counters in 'perf stat', from David
        Ahern.

      . Remove bogus info when using 'perf stat' -e cycles/instructions,
        from Ramkumar Ramachandra.

   * 'perf lock' enhancements:

      . 'perf lock' fixes and cleanups, from Davidlohr Bueso.

   * 'perf test' enhancements:

      . Fixup PERF_SAMPLE_TRANSACTION handling in sample synthesizing
        and 'perf test', from Adrian Hunter.

      . Clarify the "sample parsing" test entry, from Arnaldo Carvalho
        de Melo.

      . Consider PERF_SAMPLE_TRANSACTION in the "sample parsing" test,
        from Arnaldo Carvalho de Melo.

      . Memory leak fixes in 'perf test', from Felipe Pena.

   * 'perf bench' enhancements:

      . Change the procps visible command-name of invididual benchmark
        tests plus cleanups, from Ingo Molnar.

   * Generic perf tooling infrastructure/plumbing changes:

      . Separating data file properties from session, code
        reorganization from Jiri Olsa.

      . Fix version when building out of tree, as when using one of
        these:

        $ make help | grep perf
          perf-tar-src-pkg    - Build perf-3.12.0.tar source tarball
          perf-targz-src-pkg  - Build perf-3.12.0.tar.gz source tarball
          perf-tarbz2-src-pkg - Build perf-3.12.0.tar.bz2 source tarball
          perf-tarxz-src-pkg  - Build perf-3.12.0.tar.xz source tarball
        $

        from David Ahern.

      . Enhance option parse error message, showing just the help lines
        of the options affected, from Namhyung Kim.

      . libtraceevent updates from upstream trace-cmd repo, from Steven
        Rostedt.

      . Always use perf_evsel__set_sample_bit to set sample_type, from
        Adrian Hunter.

      . Memory and mmap leak fixes from Chenggang Qin.

      . Assorted build fixes for from David Ahern and Jiri Olsa.

      . Speed up and prettify the build system, from Ingo Molnar.

      . Implement addr2line directly using libbfd, from Roberto Vitillo.

      . Separate the GTK support in a separate libperf-gtk.so DSO, that
        is only loaded when --gtk is specified, from Namhyung Kim.

      . perf bash completion fixes and improvements from Ramkumar
        Ramachandra.

      . Support for Openembedded/Yocto -dbg packages, from Ricardo
        Ribalda Delgado.

  And lots and lots of other fixes and code reorganizations that did not
  make it into the list, see the shortlog, diffstat and the Git log for
  details!"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (300 commits)
  uprobes: Fix the memory out of bound overwrite in copy_insn()
  uprobes: Fix the wrong usage of current->utask in uprobe_copy_process()
  perf tools: Remove unneeded include
  perf record: Remove post_processing_offset variable
  perf record: Remove advance_output function
  perf record: Refactor feature handling into a separate function
  perf trace: Don't relookup fields by name in each sample
  perf tools: Fix version when building out of tree
  perf evsel: Ditch evsel->handler.data field
  uprobes: Export write_opcode() as uprobe_write_opcode()
  uprobes: Introduce arch_uprobe->ixol
  uprobes: Kill module_init() and module_exit()
  uprobes: Move function declarations out of arch
  perf/x86/intel: Add Ivy Bridge-EP uncore IRP box support
  perf/x86/intel/uncore: Add filter support for IvyBridge-EP QPI boxes
  perf: Factor out strncpy() in perf_event_mmap_event()
  tools/perf: Add required memory barriers
  perf: Fix arch_perf_out_copy_user default
  perf: Update a stale comment
  perf: Optimize perf_output_begin() -- address calculation
  ...
2013-11-12 10:06:34 +09:00
Arnaldo Carvalho de Melo 67c1e4a53b perf tests: Use lower sample_freq in sw clock event period test
We were using it at 10 kHz, which doesn't work in machines where somehow
the max freq was auto reduced by the kernel:

[root@ssdandy ~]# perf test 19
19: Test software clock events have valid period values    : FAILED!
[root@ssdandy ~]# perf test -v 19
19: Test software clock events have valid period values    :
--- start ---
Couldn't open evlist: Invalid argument
---- end ----
Test software clock events have valid period values: FAILED!
[root@ssdandy ~]#

[root@ssdandy ~]# cat /proc/sys/kernel/perf_event_max_sample_rate
7000

Reducing it to 500 Hz should be good enough for this test and also
shouldn't affect what it is testing.

But warn the user if it fails, informing the knob and the freq tried.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-548rhj1uo6xbwnxa95kw3hqe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-11 16:43:34 -03:00