Use the new options for default audio support.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This enables Bluetooth modules in davinic_all_defconfig needed for LEGO
MINDSTORMS EV3.
Build CONFIG_SERIAL_DEV_BUS into the kernel since SERIAL_DEV_CTRL_TTYPORT
requires it so.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This removes CONFIG_DAVINCI_RESET_CLOCKS. The option has been removed from
the kernel.
Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The da850-evm came with an LCD with a backlight tied to a pwm. This
enables CONFIG_BACKLIGHT_PWM as a module so the PWM backlight can be
used to maintain brightness control of the backlight.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Enable the remoteproc framework and the da8xx remoteproc driver by
default in the davinci defconfig.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This changes CONFIG_DAVINCI_WATCHDOG from a module to a compiled-in
option. Since the reset function has been moved out of the mach code in
commit 94f2e94514 ("ARM: davinci: remove watchdog reset") and into the
watchdog driver, devices cannot reboot unless the watchdog driver is
loaded, so make it a compiled-in option so that we can always reboot, even
when modules are not loaded.
Cc: Sekhar Nori <nsekhar@ti.com>
Suggested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This enables SYSCON_REBOOT_MODE as a module. This is used by LEGO
MINDSTORMS EV3 to reboot into a special firmware update mode.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Enables CONFIG_USB_USBNET so that well known USB network adapters
can enumerate as network interfaces.
Signed-off-by: Aparna Balasubramanian <aparnab@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Enable the CMA and DMA_CMA Kconfig options by default for
Davinci platforms. Davinci remoteproc driver is one of the
modules that depends on these options, and this allows the
driver to be made visible for selection with menuconfig.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
There is some disagreement between the partition table map in Linux
for the DA850-EVM and the corresponding partition map in U-Boot.
To prevent breaking the Kernel, this patch enables MTD_CMDLINE_PARTS
which will allow the U-Boot to pass the partition map so future partitions
match without breaking backwards compatibility.
While at it, also sync to savedefconfig which leads to removal of
CONFIG_MMC_BLOCK_BOUNCE.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This enables the tinydrm and ST7586 panel modules used by the display
on LEGO MINDSTORMS EV3.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
mtdtests module has some useful tests to verify that
mtd drivers like davinci_nand are working correctly.
Enable it in davinci_all_defconfig to make testing and
debug easier.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
CPPI 4.1 DMA is now supported on AM18xx.
Update the config to use it instead of PIO mode.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Enable support for USB audio and video camera devices.
Tested on OMAP-L138 LCDK using Logitech webcam and
Plantronics headset.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
davinci_all_defconfig is out of sync with savedefconfig in some places.
Regenerate the default settings by:
$ make davinci_all_config
$ make savedefconfig
$ cp defconfig arch/arm/configs/davinci_all_defconfig
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This enables the power supply module for the LEGO MINDSTORMS EV3 battery.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts davinci_all_defconfig to use libata PATA
drivers.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
[b.zolnierkie: split from bigger patch + added patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
This enables the TI ADS7950 IIO driver. This is used on LEGO MINDSTORMS
EV3. The other IIO configs removed in this patch are selected by
CONFIG_TI_ADS7950, so they are not actually being desabled.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
We need IRQs from the tca6416 expander for vpif capture to work on the
da850-evm board.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Enable the VPIF display module and the video encoder present on the
da850-evm UI board.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Add the da850-ahci driver to davinci defconfig.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This enables the iio subsystem. This will be used by LEGO MINDSTORMS EV3,
which has an ADS7957 chip.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This enables PWM and the TI ECAP and EHRWPM modules. These are used on LEGO
MINDSTORMS EV3.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This enables the DA8xx pinconf driver by default. It is needed by LEGO
MINDSTORMS EV3.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This enables the pwm-beeper module. This is used by the speaker on LEGO
MINDSTORMS EV3.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This enables the dumb-vga-dac driver by default for davinci boards.
The driver is needed for tilcdc support on da850-lcdk board.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Enable media support and V4L2 capture, along with video decoders used
on da850 platforms.
Tested on da850-lcdk.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The musb driver is enabled but the phy and the glue
for the da8xx are not enabled.
Enable them.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Enable the davinci ohci driver as a module for usb
tested with the omap138-lcdk board.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Some kernel configuration options required for systemd
support are missing in davinci_all_defconfig. Add them.
This is based on recommendations in:
http://cgit.freedesktop.org/systemd/systemd/tree/README
Options which kernel enables by default (and will thus be removed
upon next savedefconfig update) are not included.
Tested on OMAP-L138 LCDK board with fully up to date armv5
archlinux filesystem.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
With the da8xx memory controller and master peripheral priority
drivers merged and corresponding device tree changes in place we can
now enable appropriate options by default.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The LEDs default-on trigger is nice to have. For example, it can be used
to configure a LED as a power indicator.
Signed-off-by: David Lechner <david@lechnology.com>
[nsekhar@ti.com: build as module, subject line fixes]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This changes the davinci default configuration to build the davinci
MMC driver into the kernel. This allows booting from an SD card without
requiring an initrd containing the kernel module.
Signed-off-by: David Lechner <david@lechnology.com>
[nsekhar@ti.com: minor commit message adjustments]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The gpio-poweroff driver is needed by LEGO MINDSTORMS EV3 (AM1808 based
board).
Signed-off-by: David Lechner <david@lechnology.com>
[nsekhar@ti.com: subject line adjustment]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
With the device tree changes for tilcdc in place, we can now enable
the driver by default in the davinci_all defconfig file.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This enables UBI+UBIFS to handle the NAND MTDs, including the useful
MTD_UBI_BLOCK.
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This enables the use of the memory/ti-aemif.c driver.
ATM most davinci boards use the mach-davinci aemif code which gets in
the way of genericity and proper DT boot.
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The LCDK embeds a LAN8710.
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This driver handles the RTC of most davinci SoCs.
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Build audio support for DA850-based devices as modules in the default
defconfig.
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
It's been awhile since a cleanup was done. Regenerate the default settings by
$ make davinci_all_config
$ make savedefconfig
$ cp defconfig arch/arm/configs/davinci_all_defconfig
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Enable SPI driver and SPI NOR flash support as modules.
Tested with SPI NOR flash on DA850-EVM. Basic boot test only to confirm
NOR flash device detection.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
CONFIG_FHANDLE is required by systemd[1], which is the
default init system in more and more distributions.
So lets enable it for DaVinci platforms as well.
While at it, remove stale entry CONFIG_INOTIFY=y
[1] https://github.com/systemd/systemd/blob/master/README#L37
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Having switched over all of the users of CONFIG_PM_RUNTIME to use
CONFIG_PM directly, turn the latter into a user-selectable option
and drop the former entirely from the tree.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
In commit 9c62a68d13 ("netpoll:
Remove dead packet receive code (CONFIG_NETPOLL_TRAP)") this
Kconfig option was removed. So remove references to it from
all defconfigs as well.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the big USB driver pull request for 3.16-rc1.
Nothing huge here, but lots of little things in the USB core, and in
lots of drivers. Hopefully the USB power management will be work better
now that it has been reworked to do per-port power control dynamically.
There's also a raft of gadget driver updates and fixes, CONFIG_USB_DEBUG
is finally gone now that everything has been converted over to the
dynamic debug inteface, the last hold-out drivers were cleaned up and
the config option removed. There were also other minor things all
through the drivers/usb/ tree, the shortlog shows this pretty well.
All have been in linux-next, including the very last patch, which came
from linux-next to fix a build issue on some platforms.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlONYEMACgkQMUfUDdst+ynxvgCggMQBhN5icth8Y5hFglNNaISN
c4AAoMHR2kb62U1plylLbPnboQTjfcl0
=fG6y
-----END PGP SIGNATURE-----
Merge tag 'usb-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb into next
Pull USB driver updates from Greg KH:
"Here is the big USB driver pull request for 3.16-rc1.
Nothing huge here, but lots of little things in the USB core, and in
lots of drivers. Hopefully the USB power management will be work
better now that it has been reworked to do per-port power control
dynamically. There's also a raft of gadget driver updates and fixes,
CONFIG_USB_DEBUG is finally gone now that everything has been
converted over to the dynamic debug inteface, the last hold-out
drivers were cleaned up and the config option removed. There were
also other minor things all through the drivers/usb/ tree, the
shortlog shows this pretty well.
All have been in linux-next, including the very last patch, which came
from linux-next to fix a build issue on some platforms"
* tag 'usb-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (314 commits)
usb: hub_handle_remote_wakeup() only exists for CONFIG_PM=y
USB: orinoco_usb: remove CONFIG_USB_DEBUG support
USB: media: lirc: igorplugusb: remove CONFIG_USB_DEBUG support
USB: media: streamzap: remove CONFIG_USB_DEBUG
USB: media: redrat3: remove CONFIG_USB_DEBUG usage
USB: media: redrat3: remove unneeded tracing macro
usb: qcserial: add additional Sierra Wireless QMI devices
usb: host: max3421-hcd: Use module_spi_driver
usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity
usb: host: max3421-hcd: fix "spi_rd8" uses dynamic stack allocation warning
usb: host: max3421-hcd: Fix missing unlock in max3421_urb_enqueue()
usb: qcserial: add Netgear AirCard 341U
Documentation: dt-bindings: update xhci-platform DT binding for R-Car H2 and M2
usb: host: xhci-plat: add xhci_plat_start()
usb: host: max3421-hcd: Fix potential NULL urb dereference
Revert "usb: gadget: net2280: Add support for PLX USB338X"
USB: usbip: remove CONFIG_USB_DEBUG reference
USB: remove CONFIG_USB_DEBUG from defconfig files
usb: resume child device when port is powered on
usb: hub_handle_remote_wakeup() depends on CONFIG_PM_RUNTIME=y
...
The Kconfig symbol USB_MUSB_PERIPHERAL was removed in v3.1. The last two
checks for its macro now always evaluate to false. So remove these
checks.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
[nsekhar@ti.com: also cleaned-up usage in defconfig file]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Peter Ujfalusi
David Lechner
Adam Ford
Bartosz Golaszewski
Aparna Balasubramanian
Suman Anna
Sekhar Nori
Alexandre Bailon
Kevin Hilman
Axel Haslam
Karl Beldan
Rafael J. Wysocki
Paul Gortmaker
Linus Torvalds
Naoki MATSUMOTO
Paul Bolle