Commit Graph

48 Commits

Author SHA1 Message Date
Michael Williamson 2e3e2a5e4f davinci: spi: move event queue parameter to platform data
For DMA operation, the davinci spi driver needs an event queue number.
Currently, this number is passed as a IORESOURCE_DMA.  This is not
correct, as the event queue is not a DMA channel.  Pass the event queue
via the platform data structure instead.

On dm355 and dm365, move the eventq assignment for spi0 out of resources
array and into platform data.

Signed-off-by: Michael Williamson <michael.williamson@criticallink.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-02-28 14:53:29 -08:00
Grant Likely 496a2e360a Merge branch 'for-grant' of git://arago-project.org/git/projects/linux-davinci into spi/next
* 'for-grant' of git://arago-project.org/git/projects/linux-davinci into spi/next
   spi: davinci: fix checkpatch errors
   spi: davinci: whitespace cleanup
   spi: davinci: remove unused variable 'pdata'
   spi: davinci: set chip-select mode in SPIDEF only once
   spi: davinci: enable both activation and deactivation of chip-selects
   spi: davinci: remove unnecessary data transmit on CS disable
   spi: davinci: enable GPIO lines to be used as chip selects
   spi: davinci: simplify prescalar calculation
   spi: davinci: remove 'wait_enable' platform data member
   spi: davinci: make chip-slect specific parameters really chip-select specific
   spi: davinci: consolidate setup of SPIFMTn in one function
   spi: davinci: setup chip-select timers values only if timer enabled
   spi: davinci: add support for wait enable timeouts
   spi: davinci: remove unused members of davinci_spi_slave
   spi: davinci: eliminate the single member structure davinci_spi_slave
   spi: davinci: eliminate unnecessary update of davinci_spi->count
   spi: davinci: simplify calculation of edma acount value
   spi: davinci: check for NULL buffer pointer before using it
   spi: davinci: remove unnecessary disable of SPI
   spi: davinci: remove unnecessary 'count' variable in driver private data
   spi: davinci: remove unnecessary completion variable initialization
   spi: davinci: remove non-useful interrupt mode support
   spi: davinci: simplify poll mode transfers
   spi: davinci: add support for interrupt mode
   spi: davinci: configure the invariable bits in spipc0 only once
   spi: davinci: remove unnecessary function davinci_spi_bufs_prep()
   spi: davinci: remove unnecessary call to davinci_spi_setup_transfer()
   spi: davinci: do not store DMA channel information per chip select
   spi: davinci: always start transmit DMA
   spi: davinci: do not use temporary buffer if no transmit data provided
   spi: davinci: always start receive DMA
   spi: davinci: use edma_write_slot() to setup EDMA PaRAM slot
   spi: davinci: fix DMA event generation stoppage
   spi: davinci: fix EDMA CC errors at end of transfers
   spi: davinci: handle DMA completion errors correctly
   spi: davinci: remove usage of additional completion variables for DMA
   spi: davinci: let DMA operation be specified on per-device basis
   spi: davinci: remove non-useful "clk_internal" platform data
   spi: davinci: enable and power-up SPI only when required
   spi: davinci: setup the driver owner
   spi: davinci: add additional comments
   spi: davinci: add EF Johnson Technologies copyright
   spi: davinci: removed unused #defines
   spi: davinci: remove unnecessary typecast
   spi: davinci: do not treat Tx interrupt being set as error
   spi: davinci: do not allocate DMA channels during SPI device setup
   spi: davinci: remove unnecessary private data member 'region_size'
   spi: davinci: shorten variable names
   spi: davinci: kconfig: add manufacturer name to prompt string
2010-12-29 00:47:38 -07:00
Brian Niebuhr 3409e408ab spi: davinci: remove non-useful "clk_internal" platform data
The "clk_internal" platform data member which contols the
CLKMOD bit in Global Control Register 1 is not useful
since CLKMOD needs be set to 1 *always* to ensure master
mode operation.

Remove this platform data.

Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com>
Tested-By: Michael Williamson <michael.williamson@criticallink.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2010-11-18 18:38:36 +05:30
Brian Niebuhr cf90fe7350 spi: davinci: remove non-useful interrupt mode support
The interrupt mode support as it stands is another version
of poll mode. Even when interrupt mode is selected, the code
tight loops on interrupt status register, rendering it totally
useless. A completion variable is initialized, but never used.

Remove this fake interrupt mode since users can anyway use
poll mode with no functional difference. A usefully implemented
interrupt mode support can be added later.

Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com>
Tested-By: Michael Williamson <michael.williamson@criticallink.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2010-11-18 18:38:29 +05:30
Brian Niebuhr 53a31b07c5 spi: davinci: make chip-slect specific parameters really chip-select specific
Some chip-select specific paramterers like wdelay, parity, usage of
chip-select timers (and the actual timer values) are included in
platform data forcing the same behaviour across all chip-selects.

Create a new davinci_spi_config data structure which can be passed
along using controller_data member of spi_device data structure
on a per-device basis.

Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com>
Tested-By: Michael Williamson <michael.williamson@criticallink.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2010-11-18 18:38:26 +05:30
Brian Niebuhr 7978b8c385 spi: davinci: enable both activation and deactivation of chip-selects
Let davinci_spi_chipselect() perform both activation and
deactivation of chip selects. This lets spi_bitbang fully
control chip select activation, as intended by the SPI API.

With this change, the chip select activation code need not
be duplicated in davinci_spi_bufs_{pio|dma}().

Also, keeping chip select active control is removed as a
platform data and simply controlled using information from
spi_bitbang on whether chip slect should be activated or
de-activated.

Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com>
Tested-By: Michael Williamson <michael.williamson@criticallink.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2010-11-18 18:38:24 +05:30
Chris Paulson-Ellis bedad0ca3f ASoC: davinci: fixes for multi-component
Multi-component commit f0fba2ad broke a few things which this patch should
fix. Tested on the DM355 EVM. I've been as careful as I can, but it would be
good if those with access to other Davinci boards could test.

--

The multi-component commit put the initialisation of
snd_soc_dai.[capture|playback]_dma_data into snd_soc_dai_ops.hw_params of the
McBSP, McASP & VCIF drivers (davinci-i2s.c, davinci-mcasp.c & davinci-vcif.c).
The initialisation had to be moved from the probe function in these drivers
because davinci_*_dai changed from snd_soc_dai to snd_soc_dai_driver.

Unfortunately, the DMA params pointer is needed by davinci_pcm_open (in
davinci-pcm.c) before hw_params is called. I have moved the initialisation to
a new snd_soc_dai_ops.startup function in each of these drivers. This fix
indicates that all platforms that use davinci-pcm must have been broken and
need to test with this fix.

--

The multi-component commit also changed the McBSP driver name from
"davinci-asp" to "davinci-i2s" in davinci-i2s.c without updating the board
level references to the driver name. This change is understandable, as there
is a similarly named "davinci-mcasp" driver in davinci-mcasp.c.

There is probably no 'correct' name for this driver. The DM6446 datasheet
calls it the "ASP" and describes it as a "specialised McBSP". The DM355
datasheet calls it the "ASP" and describes it as a "specialised ASP". The
DM365 datasheet calls it the "McBSP". Rather than fix this problem by
reverting to "davinci-asp", I've elected to avoid future confusion with the
"davinci-mcasp" driver by changing it to "davinci-mcbsp", which is also
consistent with the names of the functions in the driver. There are other
fixes required, so it was never going to be as simple as a revert anyway.

--

The DM365 only has one McBSP port (of the McBSP platforms, only the DM355 has
2 ports), so I've changed the the id of the platform_device from 0 to -1.

--

In davinci-evm.c, the DM6446 EVM can no longer share a snd_soc_dai_link
structure with the DM355 EVM as they use different cpu DAI names (the DM355
has 2 ports and the EVM uses the second port, but the DM6446 only has 1 port).
This also means that the 2 boards need different snd_soc_card structures.

--

The codec_name entries in davinci-evm.c didn't match the i2c ids in the board
files. I have only checked and fixed the details of the names used for the
McBSP based platforms. Someone with a McASP based platform (eg DA8xx) should
check the others.

Signed-off-by: Chris Paulson-Ellis <chris@edesix.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-17 18:36:40 +00:00
Kevin Hilman 7940a34b2e Merge branch 'davinci-next' into davinci-for-linus
Conflicts:
	arch/arm/mach-davinci/board-da830-evm.c
	arch/arm/mach-davinci/board-da850-evm.c
2010-10-21 11:21:55 -07:00
Santosh Shilimkar 2de5c00ac0 ARM: 6409/1: davinci: map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE
On Davinci SRAM is mapped as MT_DEVICE becasue of the section
mapping pre-requisite instead of intended MT_MEMORY_NONCACHED

Since the section mapping limitation gets fixed with first
patch in this series, the MT_MEMORY_NONCACHED can be used now.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-25 15:58:40 +01:00
Cyril Chemparathy 782f2d7827 davinci: cleanup mdio arch code and switch to phy_id
This patch removes davinci architecture code that has now been rendered
useless by the previous patches in the MDIO separation series.

In addition, the earlier phy_mask definitions have been replaced with
corresponding phy_id definitions.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Tested-by: Michael Williamson <michael.williamson@criticallink.com>
Tested-by: Caglar Akyuz <caglarakyuz@gmail.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-24 07:40:30 -07:00
Cyril Chemparathy d22960c8bb davinci: add mdio platform devices
This patch adds mdio platform devices on SoCs that have the necessary
hardware.  Clock lookup entries (aliases) have also been added, so that the
MDIO and EMAC drivers can independently enable/disable a shared underlying
clock.  Further, the EMAC MMR region has been split down into separate MDIO
and EMAC regions.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Acked-by: David S. Miller <davem@davemloft.net>
Tested-by: Michael Williamson <michael.williamson@criticallink.com>
Tested-by: Caglar Akyuz <caglarakyuz@gmail.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-24 07:40:29 -07:00
Sekhar Nori bc3ac9f316 davinci: edma: provide ability to detect insufficient CC info data
This patch modifies the EDMA driver to expect the channel
controller (CC) infomation passed on by the platform as a fixed
size (EDMA_MAX_CC) array of pointers to structures.

Doing so helps catch errors of the sort where the resource
structure has information for more channel controllers than
the number channel controller info structures defined.

Such insufficient platform data would lead to illegal memory
accesses.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-08-05 09:58:24 -07:00
Thomas Koeller a2767b41ee davinci: DM365: fixed second serial port
The register base address for the second serial port (UART1) was
wrong.

Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-08-05 09:58:22 -07:00
Thomas Koeller 7735227e76 DM365: Added more PINMUX configurations for AEMIF
More complete AEMIF support for boards.

Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-13 11:10:31 -07:00
Thomas Koeller 0efe2b7442 DM365: Make CLKOUTx available
Added PINMUX configurations for the CLKOUT0 .. CLKOUT2
functions, for boards that want to use these clocks.

Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-13 11:10:30 -07:00
Thomas Koeller 2168e76d6b DM365: Added PINMUX definitions for GPIO30..32
Board code may want to use them.

Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-13 11:10:30 -07:00
Cyril Chemparathy 779b0d53ca Davinci: pinmux - use ioremap()
This patch modifies the pinmux implementation so as to ioremap() the pinmux
register area on first use.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-13 10:05:29 -07:00
Cyril Chemparathy bd80894704 Davinci: aintc/cpintc - use ioremap()
This patch implements the following:

 - interrupt initialization uses ioremap() instead of passing a virtual address
   via davinci_soc_info.

 - machine definitions directly point to cp_intc_init() or davinci_irq_init()

 - davinci_intc_type and davinci_intc_base now get initialized in controller
   specific init functions instead of davinci_common_init()

 - minor fix in davinci_irq_init() to use intc_irq_num instead of
   DAVINCI_N_AINTC_IRQ

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-13 10:05:28 -07:00
Cyril Chemparathy e4c822c7e9 Davinci: psc - use ioremap()
This patch modifies the psc and clock control code to use ioremap()ed
registers.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-13 10:05:27 -07:00
Cyril Chemparathy 3347db8392 Davinci: jtag_id - use ioremap()
This patch replaces the jtag id base info in davinci_soc_info with a physical
address which is then ioremap()ed within common code.

This patch (in combination with a similar change for PSC) will allow us to
eliminate the SYSCFG nastiness in DA8xx code.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-13 10:05:24 -07:00
Cyril Chemparathy b8d4429395 Davinci: gpio - use ioremap()
This patch modifies the gpio_base definition in davinci_soc_info to be a
physical address, which is then ioremap()ed by the gpio initialization
function.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-13 10:05:22 -07:00
Cyril Chemparathy c78a5bc2e7 Davinci: watchdog reset separation across socs
The earlier watchdog reset mechanism had a couple of limitations.  First, it
embedded a reference to "davinci_wdt_device" inside common code.  This
forced all derived platforms (da8xx and tnetv107x) to define such a device.
This also would have caused problems in including multiple socs in a single
build due to symbol redefinition.

With this patch, davinci_watchdog_reset() now takes the platform device as an
argument.  The davinci_soc_info struct has been extended to include a reset
function and a watchdog platform_device.  arch_reset() then uses these
elements to reset the system in a SoC specific fashion.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Tested-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-06 15:02:09 -07:00
Cyril Chemparathy 5b3a05ca91 Davinci: eliminate pinmux offset verbosity
Pinmux registers are sequential, and do not need to be enumerated out as they
currently are.  This reduces code volume and keeps things simple.

If some future SoC comes up with a discontiguous register map, PINMUX() can
then be expanded with local token pasting.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-06 15:02:09 -07:00
Cyril Chemparathy 686b634a07 Davinci: gpio - controller type support
This patch allows for gpio controllers that deviate from those found on
traditional davinci socs.  davinci_soc_info has an added field to indicate the
soc-specific gpio controller type.  The gpio initialization code then bails
out if necessary.

More elements (tnetv107x) to be added later into enum davinci_gpio_type.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Tested-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-06 15:02:08 -07:00
Thomas Koeller ce100669d2 davinci: DM365: Allow use of GPIO64_57
Extended the MUX configuration to allow use of GPIO
terminals 64..57.

Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-06 15:02:06 -07:00
Kevin Hilman 28552c2eae davinci: misc cleanups from sparse
- Convert data/functions to static
- include headers for missing declarations
- pointer cleanups:  struct foo *__iomem f --> struct foo __iomem *f;

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-06 15:02:01 -07:00
Kevin Hilman c8e42de6ef davinci: DM365: fix duplicate default IRQ priorities
IRQ 29 has two possible interrupts DDRINT and RTC, but having both in
the default priority table is confusing (and triggers a warning from
sparse.)

This patch removes the lower priority DDRINT from the default priority
table leaving the RTC setting as the default.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-04-05 15:25:11 -07:00
Sandeep Paulraj a3e13e89d6 DaVinci DM365: Adding DM365 SPI support
This patch adds SPI init for DM365.
It does the following
1) Initializes SPI0
2) Defines resources to be used by SPI0
3) Adds platform data for SPI0

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-01 10:20:24 -08:00
Kevin Hilman 08aca087f2 davinci: clkdev cleanup: remove clk_lookup wrapper, use clkdev_add_table()
Remove unneeded 'struct davinci_clk' wrapper around 'struct clk_lookup'
and use clkdev_add_table() to add the list of clocks in one go.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04 13:30:09 -08:00
Miguel Aguilar e89861e9b4 DaVinci: DM365: Voice codec support for the DM365 SoC
This patch adds the generic Voice Codec support for the DM365 based
platforms.

Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04 13:30:09 -08:00
Sandeep Paulraj 7307d093e6 DaVinci: DM365: Changing default queue for DM365.
In DM365 Q0, Q1 and Q2 are used by codecs.
LSP drivers should use Q3.
This patch changes the default queue for DM365.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04 13:29:54 -08:00
Murali Karicheri f2a4c59df6 DaVinci - Adding platform & board changes for vpfe capture on DM365
This patch adds following changes:-
	1) add sub device configuration data for TVP5146 used by vpfe capture
	2) registers platform devices for vpfe_capture, isif and vpss
	3) defines hardware resources for the devices listed under 2)
	4) defines clock aliase for isif driver
	5) adding setup_pinmux() for isif

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04 13:28:46 -08:00
Miguel Aguilar c92b29ec4a DaVinci: DM365: Add the device_enable for the DaVinci Keyscan
Adds the device_enable function to the DaVinci Keyscan platform data
to setup the PINMUX configuration.

It also removes #ifdef from the DM365 EVM board in order to load it
properly as a module.

Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-01-06 08:57:45 -08:00
Miguel Aguilar 99381b4f11 DaVinci: DM365: Enable DaVinci RTC support for DM365 EVM
The general structures are defined at DM365 SoC file and the specific
platform data structure for the EVM is defined at board file.

Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-25 10:21:38 -08:00
Miguel Aguilar 990c09d5f5 Davinci: DM365: Enable DaVinci Key Scan support for DM365 EVM
The general structures are defined at DM365 SoC file and the specific
platform data structure for the EVM is defined at board file.

Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com>
2009-11-25 10:21:32 -08:00
Sergei Shtylyov 42d399e418 DaVinci: remove unneeded #include's
There have accumulated quite a lot of them after the code reorganizations...

In several cases I had to replace #include <linux/dma-mapping.h> which wasn't
needed directly but happened to #include <linux/err.h> which was needed.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-25 10:21:31 -08:00
Miguel Aguilar e9ab3214a8 Davinci: DM365: Add platform device for McBSP
1) Registers the platform device for McBSP on dm365.
2) Add platform data to DM365 EVM board file.
3) Set i2c address for audio codec at DM365 EVM board file.

Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-25 10:21:17 -08:00
Sandeep Paulraj ed16067205 DaVinci: DM365: Correct USB parent clock
The parent clock for the USB source clock is actually PLL1 aux clock,
not PLL2 sysclk1.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-25 10:21:17 -08:00
Sandeep Paulraj 0c30e0d31b DaVinci: DM365: Adding entries for DM365 IRQ's
This patch adds definitions for some DM365 IRQs that are used by
the codecs. Codecs will also use the IRQs.
Entries are being added to enable/disable IRQ's.
There is no use as such for these entires in the kernel itself.
Instead these will be used by the "linuxutils" package of the DVSDK.

For further information on IRQ muxing refer to
http://focus.ti.com/lit/ug/sprufg5a/sprufg5a.pdf

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26 11:55:58 +03:00
Sandeep Paulraj cc36e97b0b DaVinci: DM365: Add Support for new Revision of silicon
DM365 RBL has been updated. The variant number has changed for this
new revision of silicon. This patch adds support for the
new revision of DM365.
The name fields are also being updated to reflect the version
of the silicon.

Without this minor fix DM365 REV 1.2 will not boot up

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26 11:55:50 +03:00
Sandeep Paulraj 866d286953 DaVinci: DM365: Fix Compilation issue due to PINMUX entry
The mask can hold only 8 bit values. This gave a
compilation warning. This patch rectifies the warning.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26 11:55:50 +03:00
Sandeep Paulraj a0f0202e2a DaVinci: EDMA: Updating default queue handling
EDMA queues in DM365 are a little different than those
on other DaVinci's. On DM365 Q0 and Q1 have the larger
FIFO size. We want Q0 and Q1 to be used by codecs and
DVSDK demos.
MMC driver is the only driver which uses the flag
'EVENTQ_DEFAULT'. So MMC driver should be using Q2 instead of
Q1 on DM365.
This patch allows us to declare a "default queue" from
SOC specific code. If it is not declared then the EDMA
driver assumes a default of queue 1.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26 11:55:49 +03:00
David Brownell 7a36071e79 davinci: dm365 gpio irq support
Support DM365 GPIOs ... primarily by handling non-banked GPIO IRQs:

 - Flag DM365 chips as using non-banked GPIO interrupts, using a
   new soc_info field.

 - Replace the gpio_to_irq() mapping logic.  This now uses some
   runtime infrastructure, keyed off that new soc_info field,
   which doesn't handle irq_to_gpio().

 - Provide a new irq_chip ... GPIO IRQs handled directly by AINTC
   still need edge triggering managed by the GPIO controller.

DM365 chips no longer falsely report 104 GPIO IRQs as they boot.

Intelligence about IRQ muxing is missing, so for the moment this
only exposes the first eight DM365 GPIOs, which are never muxed.
The next eight are muxed, half with Ethernet (which uses most of
those pins anyway).

Tested on DM355 (10 unbanked IRQs _or_ 104 banked ones) and also
on DM365 (16 unbanked ones, only 8 made available).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26 10:57:00 +03:00
Sandeep Paulraj af5dbaef76 davinci: DM365 Updating PINMUX Entries
Patch updates DM365 PINMUX by adding entries for Video, SPI 1 - 4,
PWM 0 - 3.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26 10:57:00 +03:00
Sandeep Paulraj 15061b5d02 davinci: dm365: add EDMA support
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26 10:56:58 +03:00
Sandeep Paulraj 8ed0a9d4e7 davinci: dm365: EMAC support for SoC and dm365 EVM
The patch adds Support for EMAC in the DM365 SOC and
the DM365 EVM board.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26 10:56:58 +03:00
Sandeep Paulraj 9f51315383 davinci: dm365: add mux entries for EDMA, RTC, EMAC, keypad.
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26 10:56:58 +03:00
Sandeep Paulraj fb8fcb8913 davinci: Adding DM365 SOC Support
The patch adds base support for new TI SOC DM365, which s
similar to the dm355.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26 10:56:57 +03:00