Commit Graph

2597 Commits

Author SHA1 Message Date
Joe Perches 1b5539b1ff checkpatch: reduce runtime/cpu time used
There are some cases where checkpatch can take a long time to complete.
Reduce the likelihood of this long run-time by adding a new test for lines
with and without comments and eliminating checks on lines with only
comments.

This reduces the number of "ctx_statement_block" calls, and also the
number of tests of $stat, which is now undefined for these blank lines.

One test in particular, the "check for switch/default statements without a
break", could take an extremely long time to parse as it tries to skip
interleaving comments within the ctx_statement_block/$stat and that could
be done multiple times unnecessarily.

A small test case taken from cfg80211.h before this patch would take
1000's of seconds to run, now it's just a couple seconds.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:58:48 -07:00
Joe Perches b34c648bb3 checkpatch: better --fix of SPACING errors.
Previous attempt at fixing SPACING errors could make a hash of several
defects.

This patch should make --fix be a lot better at correcting these defects.

Trim left and right sides of these defects appropriately instead of a
somewhat random attempt at it.

Trim left spaces from any following bit of the modified line when only a
single space is required around an operator.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Phil Carmody <phil.carmody@partner.samsung.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:58:48 -07:00
Joe Perches f95a7e6a46 checkpatch: ignore #define TRACE_<foo> macros
The tracing subsystem uses slightly odd #defines to set path/directory
locations for include files.

These #defines can cause false positives for the complex macro tests so
add exclusions for these specific #defines (TRACE_SYSTEM,
TRACE_INCLUDE_FILE, TRACE_INCLUDE_PATH).

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:58:46 -07:00
Joe Perches 91bfe4843d checkpatch: add --types option to report only specific message types
Add a --types convenience option to show only specific message types.
Combined with the --fix option, this can produce specific suggested
formatting patches to files.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:58:45 -07:00
Joe Perches 61135e9663 checkpatch: fix networking kernel-doc block comment defect
checkpatch can generate a false positive when inserting a new kernel-doc
block and function above an existing kernel-doc block.

Fix it by checking that the context line is also a newly inserted line.

Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:58:44 -07:00
Joe Perches 70dc8a4835 checkpatch: warn when using extern with function prototypes in .h files
Using the extern keyword on function prototypes is superfluous visual
noise so suggest removing it.

Using extern can cause unnecessary line wrapping at 80 columns and
unnecessarily long multi-line function prototypes.

Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:58:43 -07:00
Joe Perches 7e51f19792 checkpatch: check for duplicate signatures
Emit a warning when a signature is used more than once.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:58:42 -07:00
Dave Hansen d62a201f24 checkpatch: enforce sane perl version
I got a bug report from a couple of users who said checkpatch.pl was
broken for them.  It was erroring out on fairly random lines most commonly
with messages like:

	Nested quantifiers in regex; marked by <--HERE in m/(\((?:[^\(\)]++ <-- HERE |(?-1))*\))/ at ./checkpatch.pl line 340.

The bug reporter was running a version of perl 5.8 which was end-of-lifed
in 2008: http://www.cpan.org/src/.  Versions of perl this old are at
_best_ quite untested.  At worst, they are crusty and known to be
completely broken.

If folks have a system _that_ old, then we should have mercy on them and
give them a half-decent error message rather than fail with nutty error
messages.

This patch enforces that checkpatch.pl is run with perl 5.10, which was
end-of-lifed in 2009.  The new --ignore-perl-version command-line switch
will let folks override this if they want.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:58:41 -07:00
Joe Perches 7e781f67df checkpatch: check CamelCase by word, not by $Lval
$Lval is a test for complete name (ie: foo->bar.Baz[1])

If any of this is CamelCase, then the current test uses the entire $Lval.
This isn't optimal because it can emit messages with foo->bar.Baz and
bar.Baz when Baz is a variable specified in an include file.

So instead, break the $Lval into words and check each word for CamelCase
uses.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:58:40 -07:00
Joe Perches d5e616fc1c checkpatch: add a few more --fix corrections
Suggest a few more single-line corrections.

Remove DOS line endings
Simplify removing trailing whitespace
Remove global/static initializations to 0/NULL
Convert pr_warning to pr_warn
Add space after brace
Convert binary constants to hex
Remove whitespace after line continuation
Use inline not __inline or __inline__
Use __printf and __scanf
Use a single ; for statement terminations
Convert __FUNCTION__ to __func__

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:58:39 -07:00
Linus Torvalds 5b4197845a Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig updates from Michal Marek:
 "This is the kconfig part of kbuild for v3.12-rc1:
   - post-3.11 search code fixes and micro-optimizations
   - CONFIG_MODULES is no longer a special case; this is needed to
     eventually fix the bug that using KCONFIG_ALLCONFIG breaks
     allmodconfig
   - long long is used to store hex and int values
   - make silentoldconfig no longer warns when a symbol changes from
     tristate to bool (it's a job for make oldconfig)
   - scripts/diffconfig updated to work with newer Pythons
   - scripts/config does not rely on GNU sed extensions"

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: do not allow more than one symbol to have 'option modules'
  kconfig: regenerate bison parser
  kconfig: do not special-case 'MODULES' symbol
  diffconfig: Update script to support python versions 2.5 through 3.3
  diffconfig: Gracefully exit if the default config files are not present
  modules: do not depend on kconfig to set 'modules' option to symbol MODULES
  kconfig: silence warning when parsing auto.conf when a symbol has changed type
  scripts/config: use sed's POSIX interface
  kconfig: switch to "long long" for sanity
  kconfig: simplify symbol-search code
  kconfig: don't allocate n+1 elements in temporary array
  kconfig: minor style fixes in symbol-search code
  kconfig/[mn]conf: shorten title in search-box
  kconfig: avoid multiple calls to strlen
  Documentation/kconfig: more concise and straightforward search explanation
2013-09-11 08:34:25 -07:00
Linus Torvalds 327fff3e13 Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull misc kbuild updates from Michal Marek:
 "In the kbuild misc branch, I have:
   - make rpm-pkg updates, most importantly the rpm package now calls
     /sbin/installkernel
   - make deb-pkg: debuginfo split, correct kernel image path for
     parisc, mips and powerpc and a couple more minor fixes
   - New coccinelle check"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  scripts/checkkconfigsymbols.sh: replace echo -e with printf
  Provide version number for Debian firmware package
  coccinelle: replace 0/1 with false/true in functions returning bool
  deb-pkg: add a hook argument to match debian hooks parameters
  deb-pkg: fix installed image path on parisc, mips and powerpc
  deb-pkg: split debug symbols in their own package
  deb-pkg: use KCONFIG_CONFIG instead of .config file directly
  rpm-pkg: add generation of kernel-devel
  rpm-pkg: install firmware files in kernel relative directory
  rpm-pkg: add %post section to create initramfs and grub hooks
2013-09-07 19:47:35 -07:00
Linus Torvalds 1ff5e37e72 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild update from Michal Marek:
 "Only these two commits are in the kbuild branch this time:
   - Using filechk for include/config/kernel.release
   - Cleanup in scripts/sortextable.c"

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Do not overwrite include/config/kernel.release needlessly
  scripts: remove unused function in sortextable.c
2013-09-07 19:46:50 -07:00
Linus Torvalds 4de9ad9bc0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull Tile arch updates from Chris Metcalf:
 "These changes bring in a bunch of new functionality that has been
  maintained internally at Tilera over the last year, plus other stray
  bits of work that I've taken into the tile tree from other folks.

  The changes include some PCI root complex work, interrupt-driven
  console support, support for performing fast-path unaligned data
  fixups by kernel-based JIT code generation, CONFIG_PREEMPT support,
  vDSO support for gettimeofday(), a serial driver for the tilegx
  on-chip UART, KGDB support, more optimized string routines, support
  for ftrace and kprobes, improved ASLR, and many bug fixes.

  We also remove support for the old TILE64 chip, which is no longer
  buildable"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (85 commits)
  tile: refresh tile defconfig files
  tile: rework <asm/cmpxchg.h>
  tile PCI RC: make default consistent DMA mask 32-bit
  tile: add null check for kzalloc in tile/kernel/setup.c
  tile: make __write_once a synonym for __read_mostly
  tile: remove support for TILE64
  tile: use asm-generic/bitops/builtin-*.h
  tile: eliminate no-op "noatomichash" boot argument
  tile: use standard tile_bundle_bits type in traps.c
  tile: simplify code referencing hypervisor API addresses
  tile: change <asm/system.h> to <asm/switch_to.h> in comments
  tile: mark pcibios_init() as __init
  tile: check for correct compiler earlier in asm-offsets.c
  tile: use standard 'generic-y' model for <asm/hw_irq.h>
  tile: use asm-generic version of <asm/local64.h>
  tile PCI RC: add comment about "PCI hole" problem
  tile: remove DEBUG_EXTRA_FLAGS kernel config option
  tile: add virt_to_kpte() API and clean up and document behavior
  tile: support FRAME_POINTER
  tile: support reporting Tilera hypervisor statistics
  ...
2013-09-06 11:14:33 -07:00
Yann E. MORIN e062781397 kconfig: do not allow more than one symbol to have 'option modules'
Previously, it was possible to have more than one symbol with the
'option modules' attached to them, although only the last one would
in fact control tristates.

Since this does not make much sense, only allow at most one symbol to
control tristates.

Note: it is still possible to have more than one symbol that control
tristates, but indirectly:

    config MOD1
        bool "mod1"
        select MODULES
    config MOD2
        bool "mod2"
        select MODULES
    config MODULES
        bool
        option modules

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-09-05 11:10:08 +02:00
Yann E. MORIN c80de52d30 kconfig: regenerate bison parser
Regenerate bison parser after changes made in:
    6902dcc: kconfig: do not special-case 'MODULES' symbol

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-09-05 11:10:01 +02:00
Yann E. MORIN 6902dccfda kconfig: do not special-case 'MODULES' symbol
Currently, the 'MODULES' symbol is hard-coded to be the default symbol
that enables/disables tristates, if no other symbol was declared with
'option modules'.

While this used to be needed for the Linux kernel, we now have an
explicit 'option modules' attached to the 'MODULES' symbol (since
cset 11097a036), so we no longer need to special-case it in the
kconfig code.

Furthermore, kconfig is extensively used out of the Linux kernel, and
other projects may have another meaning for a symbol named 'MODULES'.

This patch changes the way we enable/disable tristates: if a symbol was
found with 'option modules' attached to it, then that symbol controls
enabling tristates. Otherwise, tristates are disabled, even if a symbol
named 'MODULES' exists.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-09-05 11:09:17 +02:00
Linus Torvalds 3398d252a4 Minor fixes mainly, including a potential use-after-free on remove found by
CONFIG_DEBUG_KOBJECT_RELEASE which may be theoretical.
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJSJsL7AAoJENkgDmzRrbjx/N0P+wU81L55uYdJnDVPsW/fzhyJ
 BEZtmhFWtqxHeuFMQpwm5N3/ORwMht4czF4Hf957ePtI2PelHu+kapnFFQ+/KHZs
 T5sjH0mAYf9+CPa8wj4OKVzvd8lH4udbV+E7INVfciDySRX5HKXynJ6pZHvfeu7y
 /2q2PH6kGzuGoTEkDwOOwJ5yyZqs+RW9ZkSMStgCOUE8GmoDXEsH1KwIYE/9buCh
 XTngMo7AhimQaQ9QKypJLjlcnI9X/9ljXqFRKqSFOeMA1Ba+h+7eUqd4FJI6jDJu
 tecMOxX9PezPK6Wdg8V7AFBSzOhDPqoKQBOcaqeLd1wVICi8oQirVzwQNlsoiVNu
 JC+8rDqaeuG3dazROhaAnez7nhHfTjnMsYLVMRUmYtqXetd0qWYSmlmcJRKSJwi4
 okl/Lv5BroQdB9bB8+sc7l34nE3HXZGV3tJcNXf91NNEbDt97xFZ2YYbdtsQcOqj
 igUHcjsZq1gLsdIhnkHjTGLkLPxMTdCi8mtUc9+uzXHvSPJqEUMcn+fEA7RdliUw
 /WvpUX2tj2Al44LfBy6L0D6AVyS2/zIQ9PzH6FHsgVDqrNHomkF20w3btnM3yyPA
 hakV6vPr+kOpfSJYlTSU7yhEJh+LGkfPXeaX4X3tqubKhsZjq8rS7vrfbcqmgwvT
 DbzDKRx5R3URiiFSbb2v
 =15lp
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull module updates from Rusty Russell:
 "Minor fixes mainly, including a potential use-after-free on remove
  found by CONFIG_DEBUG_KOBJECT_RELEASE which may be theoretical"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  module: Fix mod->mkobj.kobj potentially freed too early
  kernel/params.c: use scnprintf() instead of sprintf()
  kernel/module.c: use scnprintf() instead of sprintf()
  module/lsm: Have apparmor module parameters work with no args
  module: Add NOARG flag for ops with param_set_bool_enable_only() set function
  module: Add flag to allow mod params to have no arguments
  modules: add support for soft module dependencies
  scripts/mod/modpost.c: permit '.cranges' secton for sh64 architecture.
  module: fix sprintf format specifier in param_get_byte()
2013-09-04 17:34:29 -07:00
Mike Pagano c8272faf5e diffconfig: Update script to support python versions 2.5 through 3.3
Support past and active versions of python while maintaining backward
compatibility. Script has been tested on python versions up to and
including 3.3.X.

Signed-off-by: Mike Pagano <mpagano@gentoo.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-09-01 21:24:51 +02:00
Tony Lu a61fd5e366 tile: support ftrace on tilegx
This commit adds support for static ftrace, graph function support,
and dynamic tracer support.

Signed-off-by: Tony Lu <zlu@tilera.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-30 10:20:13 -04:00
Max Filippov 36b5401b76 scripts/checkkconfigsymbols.sh: replace echo -e with printf
-e is a non-standard echo option, echo output is
implementation-dependent when it is used. Replace echo -e
with printf as suggested by POSIX echo manual.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-08-28 17:00:47 +02:00
Stuart Longland 7848ea7902 kbuild: Add MIPS specific files to generated package.
A lot of 64-bit systems supported by Linux/MIPS have boot firmware or
bootloaders that only understand 32-bit ELF files, and as such, the vmlinux.32
target exists to support these systems.  Therefore, it'd be nice if the tar-pkg
target recognised this, and included the right version when packaging up a
binary of the kernel.

This updates buildtar to support MIPS targets.  MIPS may use 'vmlinux'
or 'vmlinux.32' depending on the target system.  This uses 'vmlinux.32'
in preference to 'vmlinux' where present (although I should check which
is newer), including either file as /boot/vmlinux-${version}.

Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1673/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-26 15:31:54 +02:00
Chen Gang 4d10c223ba scripts/mod/modpost.c: permit '.cranges' secton for sh64 architecture.
Need permit '.cranges' section for sh64 architecture, or modpost will
report warning:

    LD      init/built-in.o
  WARNING: init/built-in.o (.cranges): unexpected non-allocatable section.
  Did you forget to use "ax"/"aw" in a .S file?
  Note that for example <linux/init.h> contains
  section definitions for use in .S files.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-08-20 15:37:40 +09:30
Mike Pagano 6bf2e84b8c diffconfig: Gracefully exit if the default config files are not present
Handle gracefully the instance where config files are not present.
Compatible with python versions 2.5, 2.6 and 2.7.
The try/except is forward compatible with python version 3 once the entire script is ported.

Signed-off-by: Mike Pagano <mpagano@gentoo.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-08-19 22:33:32 +02:00
Yann E. MORIN 04b19b773a kconfig: silence warning when parsing auto.conf when a symbol has changed type
When a symbol changes type from tristate to bool, and was previously set to
'm', a subsequent silentoldconfig would warn about inconsistency, such as:

    include/config/auto.conf:3014:warning: symbol value 'm' invalid for
    HOTPLUG_PCI_PCIE

Seen by Linus with the merge in aa8032b (sequence to reproduce by Michal):
    git checkout 1fe0135
    make mrproper
    make allmodconfig
    make silentoldconfig
    git checkout aa8032b
    make allmodconfig
    make silentoldconfig

Since HOTPLUG_PCI_PCIE changed from tristate to bool in aa8032b, it was
previously set to 'm' in auto.conf by the first allmodconfig+silentoldconfig,
but then was set to 'y' by the second allmodconfig. Then the second
silentoldconfig prints the warning.

The warning in this case is a spurious warning, which happens at the time
kconfig tries to detect symbols that have changed, to touch the empty
header files in include/config used for dependency-tracking by make.

Silence the warning when we read the old auto.conf file, since it is
perfectly legit that a symbol changed type since the previous call.

Thread in:
    http://marc.info/?l=linux-pci&m=137569198904000&w=2

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-15 22:48:08 +02:00
Clement Chauplannaz 83e8b90e1d scripts/config: use sed's POSIX interface
Script `config' relies on extensions of `GNU sed', and is thus not
working on all Unixes:
  - in-place edition of files (-i), which can be replaced with
    a temporary file;
  - extended-regexps (-r), which can be split into basic regexps;
  - single-line calls to `a' command, while some implementations
    require a leading newline before the parameter.

Rewrite calls to `sed' to comply with POSIX interface, and move them
to helper functions.

Signed-off-by: Clement Chauplannaz <chauplac@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2013-08-15 22:48:07 +02:00
Kees Cook 129784abc9 kconfig: switch to "long long" for sanity
Instead of using "long" for kconfig "hex" and "range" values, which may
change in size depending on the host architecture, use "long long". This
will allow values greater than INT_MAX on 32-bit hosts when cross
compiling.

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-08-15 22:48:06 +02:00
Heinrich Schuchardt 95e2a7d807 Provide version number for Debian firmware package
scripts/package/builddeb is used to create Debian packages.
Currently the firmware package always gets the same version number
irrespective of the Kernel version.
The paths inside the firmware package depend on the Kernel
version.

With the patch supplied the Kernel version becomes part of the
Debian firmware package number.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Ben Hutchings <ben@decadent.org.uk>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-08-15 18:01:18 +02:00
Rasmus Villemoes 46b5c9b856 coccinelle: replace 0/1 with false/true in functions returning bool
This semantic patch replaces "return {0,1};" with "return
{false,true};" in functions returning bool.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-08-13 22:43:41 +02:00
Ramkumar Ramachandra 4f9879f6c6 scripts: remove unused function in sortextable.c
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-25 16:20:33 +02:00
Anisse Astier c95182bf9b deb-pkg: add a hook argument to match debian hooks parameters
We now provide the installed image path to the kernel hooks.

This should allow the package to better integrate with debian hooks, and
should not be too disruptive of hooks supporting only one parameter.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-24 15:50:24 +02:00
Anisse Astier 9de7017644 deb-pkg: fix installed image path on parisc, mips and powerpc
Signed-off-by: Anisse Astier <anisse@astier.eu>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-24 15:50:23 +02:00
Anisse Astier 810e843746 deb-pkg: split debug symbols in their own package
This can reduce almost 3 times the size of the linux-image package,
while keeping the debug symbols available for this particular build, in
their own package.

This mimics the way kernels are built in debian, ubuntu, or with
make-kpkg, and comes at the price of a small slowdown in the building of
packages.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Cc: Ben Hutchings <ben@decadent.org.uk>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-24 15:50:23 +02:00
Anisse Astier d20917670e deb-pkg: use KCONFIG_CONFIG instead of .config file directly
Signed-off-by: Anisse Astier <anisse@astier.eu>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-24 15:50:23 +02:00
Michal Marek c3286ee337 Merge branch 'yem-kconfig-rc-fixes' of git://gitorious.org/linux-kconfig/linux-kconfig into kbuild/kconfig 2013-07-23 15:57:17 +02:00
Mike Marciniszyn 2174d29201 rpm-pkg: add generation of kernel-devel
Change the spec file to generate a kernel-devel module
allowing for compilation of external kernel modules.

This patch requires a new minimum RPM level of 4.0.3.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-23 14:36:44 +02:00
Mike Marciniszyn 41612378da rpm-pkg: install firmware files in kernel relative directory
Prior to this patch, firmware files were being installed
in /lib/firmware with a potential conflict with already
installed kernels.

firmware files are now installed in /lib/firmware/<release>
and packaged with the rest of the modules.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-23 14:36:44 +02:00
Mike Marciniszyn 3c9c7a14b6 rpm-pkg: add %post section to create initramfs and grub hooks
/sbin/installkernel is used to insure grub hooks are
inserted and the initramfs is created on the
target system.

The invokation installkernel will work with any
kernel as long as:
- /sbin/installkernel exists
- the kernel and sysem map files are readable

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-23 14:36:44 +02:00
Yann E. MORIN 508382a042 kconfig: simplify symbol-search code
There is no need for a double indirection in the temporary array that
stores the internediate search results.

Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
2013-07-16 20:39:42 +02:00
Yann E. MORIN 1407f97aed kconfig: don't allocate n+1 elements in temporary array
The temporary array that stores the search results is not NULL-terminated,
so there is no reason to allocate n+1 elements.

Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
2013-07-16 20:36:18 +02:00
Yann E. MORIN 803b351988 kconfig: minor style fixes in symbol-search code
Two minor style fixes:
  - no space before/after parenthesis in function definition
  - no {} for single-line if()

And one grammar fix in a comment.

Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
2013-07-16 20:34:44 +02:00
Yann E. MORIN f6eb6e46f7 kconfig/[mn]conf: shorten title in search-box
No need to repeat the 'CONFIG_' string in the title,
once is explicit enough.

Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jean Delvare <jdelvare@suse.de>
2013-07-16 20:26:47 +02:00
Yann E. MORIN 26e933e3c3 kconfig: avoid multiple calls to strlen
Calls to strlen are costly, so avoid calling strln as much as we can.

Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
2013-07-16 20:26:46 +02:00
Rusty Russell 8c6ffba0ed PTR_RET is now PTR_ERR_OR_ZERO(): Replace most.
Sweep of the simple cases.

Cc: netdev@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-15 11:25:01 +09:30
Linus Torvalds ae92494930 Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull coccinelle updates from Michal Marek:
 "The misc branch is reserved for Coccinelle this time:

   - 'report' is the default mode
   - MAINTAINERS update for Coccinelle
   - documentation udate
   - use new option format for spatch(1)
   - J=<n> variable to mimic make -j for coccicheck
   - check for missing pci_free_consistent() calls

  There are some patches for rpm-pkg and deb-pkg waiting for the
  3.12-rc1 merge window"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  Coccinelle: Update information about the minimal version required
  Coccinelle: Update the options used to the new option scheme
  scripts: Coccinelle script for pci_free_consistent()
  Coccinelle: Update the documentation
  Coccinelle: Update section of MAINTAINERS
  coccicheck: span checks across CPUs
  scripts/coccinelle: check for field address argument to kfree
  Coccinelle: Update the Coccinelle section of MAINTAINERS
  Coccinelle: Make 'report' the default mode
2013-07-10 16:08:06 -07:00
Linus Torvalds b202c0d520 Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig updates from Michal Marek:
 - dependency solver fix for make defconfig
 - randconfig fixes, one of which had to be reverted again
 - more user-friendly sorting of search results
 - hex and range keywords support longs
 - fix for [mn]conf not to rely on particular behavior of the LINES and
   COLS variables
 - cleanup of magic constants in kconfig/lxdialog
 - [mn]conf formatting fixes
 - fix for scripts/config's help text in out-of-tree usage (under a
   different name)

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: allow "hex" and "range" to support longs
  Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG"
  kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG
  kconfig: loop as long as we changed some symbols in randconfig
  kconfig/[mn]conf: make it explicit in the search box that a regexp is possible
  kconfig: sort found symbols by relevance
  kconfig/conf: print the seed used to initialise the RNG for randconfig
  kconfig/conf: accept a base-16 seed for randconfig
  kconfig/conf: fix randconfig setting multiple symbols in a choice
  scripts/config: replace hard-coded script name by a dynamic value
  mconf/nconf: mark empty menus/menuconfigs different from non-empty ones
  nconf: use function calls instead of ncurses' variables LINES and COLS
  mconf: use function calls instead of ncurses' variables LINES and COLS
  kconfig/lxdialog: handle newline characters in print_autowrap()
  kconfig/lxdialog: Use new mininimum resize definitions in conf_choice()
  kconfig/lxdialog: Add definitions for mininimum (re)size values
  kconfig: Fix defconfig when one choice menu selects options that another choice menu depends on
2013-07-10 16:06:46 -07:00
Linus Torvalds cb63fc2662 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild updates from Michal Marek:
 - fix for make headers_install argv explosion with too long path
 - scripts/setlocalversion does not call git update-index needlessly
 - fix for the src.rpm produced by make rpm-pkg.  The new make
   image_name can be useful also for other packaging tools.
 - scripts/mod/devicetable-offsets.o is not rebuilt during each make run
 - make modules_install dependency fix
 - scripts/sortextable portability fix
 - fix for kbuild to generate the output directory for all object files
   in subdirs.
 - a couple of minor fixes

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: create directory for dir/file.o
  tools/include: use stdint types for user-space byteshift headers
  Makefile: Fix install error with make -j option
  Fix a build warning in scripts/mod/file2alias.c
  improve modalias building
  scripts/mod: Spelling s/DEVICEVTABLE/DEVICETABLE/
  kbuild: fix error when building from src rpm
  scripts/setlocalversion on write-protected source tree
  Makefile.lib: align DTB quiet_cmd
  kbuild: fix make headers_install when path is too long
2013-07-10 16:05:40 -07:00
Kyungsik Lee e76e1fdfa8 lib: add support for LZ4-compressed kernel
Add support for extracting LZ4-compressed kernel images, as well as
LZ4-compressed ramdisk images in the kernel boot process.

Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Yann Collet <yann.collet.73@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:30 -07:00
Joe Perches c707a81de7 checkpatch: make the CamelCase cache work for non-git trees too
Might as well check include timestamps and cache the include file
CamelCase uses for the non-git case too.

The camelcase cache file is now named:

  for git:      .checkpatch-camelcase.git.<commit_id>
  for non-git:  .checkpatch-camelcase.date.<YYYYMMDDhhmm>

All .checkpatch-camelcase* files are deleted if not current.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:25 -07:00
Linus Torvalds 8dce5f3dee Merge branch 'cpuinit-delete' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
Pull first stage of __cpuinit removal from Paul Gortmaker:
 "The two commits here 1) dummy out all the __cpuinit macros so that we
  no longer generate such sections, and then 2) remove all the section
  processing that we used to do for those sections.

  This makes all the __cpuinit and friends no-ops, so that we can remove
  the use cases of it at our leisure.  Expect stage 2, which does the
  tree wide removal sweep at the end of the merge window."

* 'cpuinit-delete' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  modpost: remove all traces of cpuinit/cpuexit sections
  init.h: remove __cpuinit sections from the kernel
2013-07-07 11:01:19 -07:00
Linus Torvalds 7f0ef0267e Merge branch 'akpm' (updates from Andrew Morton)
Merge first patch-bomb from Andrew Morton:
 - various misc bits
 - I'm been patchmonkeying ocfs2 for a while, as Joel and Mark have been
   distracted.  There has been quite a bit of activity.
 - About half the MM queue
 - Some backlight bits
 - Various lib/ updates
 - checkpatch updates
 - zillions more little rtc patches
 - ptrace
 - signals
 - exec
 - procfs
 - rapidio
 - nbd
 - aoe
 - pps
 - memstick
 - tools/testing/selftests updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (445 commits)
  tools/testing/selftests: don't assume the x bit is set on scripts
  selftests: add .gitignore for kcmp
  selftests: fix clean target in kcmp Makefile
  selftests: add .gitignore for vm
  selftests: add hugetlbfstest
  self-test: fix make clean
  selftests: exit 1 on failure
  kernel/resource.c: remove the unneeded assignment in function __find_resource
  aio: fix wrong comment in aio_complete()
  drivers/w1/slaves/w1_ds2408.c: add magic sequence to disable P0 test mode
  drivers/memstick/host/r592.c: convert to module_pci_driver
  drivers/memstick/host/jmb38x_ms: convert to module_pci_driver
  pps-gpio: add device-tree binding and support
  drivers/pps/clients/pps-gpio.c: convert to module_platform_driver
  drivers/pps/clients/pps-gpio.c: convert to devm_* helpers
  drivers/parport/share.c: use kzalloc
  Documentation/accounting/getdelays.c: avoid strncpy in accounting tool
  aoe: update internal version number to v83
  aoe: update copyright date
  aoe: perform I/O completions in parallel
  ...
2013-07-03 17:12:13 -07:00
Alexandre Bounine 3bdbb62fe9 rapidio: add udev notification
Add RapidIO-specific modalias generation to enable udev notifications
about RapidIO-specific events.

The RapidIO modalias string format is shown below:

"rapidio:vNNNNdNNNNavNNNNadNNNN"

Where:
v  - Device Vendor ID (16 bit),
d  - Device ID (16 bit),
av - Assembly Vendor ID (16 bit),
ad - Assembly ID (16 bit),

as they are reported in corresponding Capability Registers (CARs)
of each RapidIO device.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@Prodrive.nl>
Cc: Micha Nelissen <micha.nelissen@Prodrive.nl>
Cc: Stef van Os <stef.van.os@Prodrive.nl>
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:08:05 -07:00
Joe Perches 351b2a1fe2 checkpatch: cache last camelcase hash as .checkpatch-camelcase.<commit>
Add a file to cache the CamelCase variables found by <commit> to reduce
the time it takes to scan the include/ directory.

Filename is '.checkpatch-camelcase.<commit>' and it is created only only
if a .git directory exists.

<commit> is determined by the last non-merge commit id in the
include/ path.

Reduces checkpatch run time by ~12 cpu seconds on my little netbook.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:45 -07:00
Jacob Keller 7d0b6594e1 checkpatch: allow longer logging function names
The current $logFunction regular expression allows names like dev_warn,
e_dbg, netdev_info, etc, but some log functions are now written like
e_dev_warn, so allow 1 or 2 word blocks with an underscore before the
logging level.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:45 -07:00
Joe Perches 3445686af7 checkpatch: ignore existing CamelCase uses from include/...
When using --strict, CamelCase uses are described with CHECK: messages.
These CamelCase uses may be acceptable and should not generate these
messages when the variable is already defined in a file from the
include/...  path.

So, change checkpatch to read all the .h files in include/...  and look
for preexisting CamelCase #defines, typedefs and function prototypes.

Add these to the existing camelcase hash so that any uses in the patch or
file can be ignored.

There are currently ~3500 files in include/.  It takes about 10 cpu
seconds on my little netbook to grep for and preseed these existing uses.

That's about 4x the time for a similar git grep.

This preseeding is only done once when using --strict and only when there
is a CamelCase use found.

If a .git directory is found, it uses 'git ls-files include' If not, it
uses 'find $root/include -name "*.h"

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:45 -07:00
Joe Perches 22735ce857 checkpatch: ignore SI unit CamelCase variants like "_uV"
Many existing variable names use SI like variants that should be otherwise
obvious and acceptable.

Whitelist them from the CamelCase message.

Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Phil Carmody <phil.carmody@partner.samsung.com>
Acked-by: Phil Carmody <phil.carmody@partner.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:45 -07:00
Joe Perches 786b632622 checkpatch: move test for space before semicolon after operator spacing
Moving this test allows the --fix option to work better.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:45 -07:00
Joe Perches 3705ce5bcc checkpatch: create an EXPERIMENTAL --fix option to correct patches
Some patches have simple defects in whitespace and formatting that
checkpatch could correct automatically.  Attempt to do so.

Add a --fix option to create a "<inputfile>.EXPERIMENTAL-checkpatch-fixes"
file that tries to use normal kernel style for some of these formatting
errors.

Add warnings against using this file without verifying the changes.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:45 -07:00
Joe Perches 23f780c904 checkpatch: improve "no space after cast" test
Some false positives exist on this test.

For instance:
	*va_arg(args, signed char *) = val.s;
or
	memset(foo, 0, sizeof(struct bar *) * baz));

Ignore lines that have an arithmetic operator or assignment
after what appears to be a cast to a pointer "(foo *)".

Add $Arithmetic convenience variable.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:45 -07:00
Joe Perches 179f8f40fc checkpatch: add a --strict test for comparison to true/false
Comparing to true or false is error prone.

Add tests for the various forms of (foo == true) && (false != bar)
that are only reported with --strict.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:45 -07:00
Joe Perches 77b9a53a62 checkpatch: don't warn on blank lines before/after braces as often
Check to make sure the blank lines aren't comment lines like:

  bool foo(bool bar)
  {
	/* Don't warn on a leading comment */
	return !bar;
	/* Don't warn on a trailing comment either */
  }

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:44 -07:00
Joe Perches c4a62ef910 checkpatch: add a placeholder to check blank lines before declarations
Figure out first how to determine if this is in a struct declaration or in
a function body before enabling this.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:44 -07:00
Joe Perches 3cc4b1c3f0 checkpatch: reduce false positive rate of "complex macros"
Allow "#define foo struct.member" without bleating a warning.

This also allows "#define foo bar.baz->qux" and so on.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:44 -07:00
Joe Perches 9d7a34a513 checkpatch: warn on comparisons to get_jiffies_64()
Comparing get_jiffies_64() is almost always wrong and time_before64 and
time_after64 should be used instead.

Warn on any comparison to get_jiffies_64().

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:44 -07:00
Joe Perches 36ec19390e checkpatch: warn on comparisons to jiffies
Comparing jiffies is almost always wrong and time_before and time_after
should be used instead.

Warn on any comparison to jiffies.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:44 -07:00
Joe Perches a605e32ebd checkpatch: warn when networking block comment lines don't start with *
Some block comments in network are written as:

	/* block comment line 1
	   block comment line 2
	 */

Emit a warning on the "block comment line 2" because it should be

	/* block comment line 1
	 * block comment line 2
	 */

This warning is only emitted on the second line of a block comment.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:44 -07:00
Joe Perches fdb4bcd610 checkpatch: improve network block comment test and message
Show the first line of the comment after a line with just /* to better
show where the defective comment style is in the file.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:44 -07:00
Joe Perches 807bd26c4c checkpatch: remove quote from CamelCase test
Commit be987d9f80 ("checkpatch: improve CamelCase test for Page") added
it but it shouldn't be there.  Must have been my fault.

Make sure that the tested variable doesn't contain a constant.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:44 -07:00
Joe Perches a640d25cea checkpatch: add --strict preference for p = kmalloc(sizeof(*p)...
Add another test for memory allocation style to follow
Documentation/CodingStyle:

		Chapter 14: Allocating memory

The preferred form for passing a size of a struct is the following:

	p = kmalloc(sizeof(*p), ...);

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:44 -07:00
Joe Perches 95e2c6023b checkpatch: warn when using gcc's binary constant ("0b") extension
The gcc extension for binary constants that start with 0b is only
supported with gcc version 4.3 or higher.

The kernel can still be compiled with earlier versions of gcc, so have
checkpatch emit a warning for these constants.

Restructure checkpatch's constant finding code a bit to support finding
these binary constants.

Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:44 -07:00
Joe Perches be79794bc1 checkpatch: change CamelCase test and make it --strict
Do not bleat a message on nominally acceptable CamelCase uses that are
separated by an _ like drm_core_has_MTRR.

CamelCase tests are also a bit noisy against certain types of code
acceptable to some kernel developers.

Make the test applicable only with --strict.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:43 -07:00
Nicolas Palix ec97946ed0 Coccinelle: Update information about the minimal version required
The naming convention of options has changed one year ago.
The options have been recently updated in the cocci file
and in scripts/coccicheck. This patch also adds this information
in the documentation.

Signed-off-by: Nicolas Palix <nicolas.palix@imag.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-03 22:58:20 +02:00
Nicolas Palix 93f1446849 Coccinelle: Update the options used to the new option scheme
spatch has changed its option scheme.
E.g., --no_show_diff is now --no-show-diff

This patch updates:
 - scripts/coccicheck
 - Semantic patches under scripts/coccinelle/

Signed-off-by: Nicolas Palix <nicolas.palix@imag.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-03 22:58:13 +02:00
张忠山 4d47dde47f kbuild: create directory for dir/file.o
When add a obj with dir to obj-y, like this

    obj-y += dir/file.o

The $(obj)/dir not created, this patch fix this.

When try to add a file(which in a subdir) to my board's obj-y, the build
progress crashed.

For example, I use at91rm9200ek board, and in kernel dir run:

  mkdir objtree
  make O=objtree at91rm9200_defconfig
  mkdir arch/arm/mach-at91/dir
  touch arch/arm/mach-at91/dir/file.c

and edit arch/arm/mach-at91/dir/file.c to add some code.
then edit arch/arm/mach-at91/Makefile, change the following line:

  obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o

to:

  obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o dir/file.o

Now build it:

  make O=objtree

Then the error appears:
  ...
  CC      arch/arm/mach-at91/board-rm9200dk.o
  CC      arch/arm/mach-at91/board-rm9200ek.o
  CC      arch/arm/mach-at91/dir/file.o
  linux-2.6/arch/arm/mach-at91/dir/file.c:5:
    fatal error: opening dependency file
    arch/arm/mach-at91/dir/.file.o.d: No such file or directory

Check the objtree:
  LANG=en ls objtree/arch/arm/mach-at91/dir
  ls: cannot access objtree/arch/arm/mach-at91/dir: No such file or directory

It's apparently that the target dir not created for file.o

Check kbuild source code. It seems that kbuild create dirs for that in
$(obj-dirs).  But if the dir need not to create a built-in.o, It should
never in  $(obj-dirs).

So I make this patch to make sure It in  $(obj-dirs)

this bug caused by commit
   f5fb976520

Signed-off-by: 张忠山 <zzs0213@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-03 22:47:08 +02:00
Linus Torvalds baa6f82093 Simple warning fix for module sections. If too late to pull, no big deal.
Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJR0NO+AAoJENkgDmzRrbjxS0YP/RoI5WguUDVx8tIdS29pwe9L
 Z5U0uIDUBZkNftlvvkdqdGjU1MeejxoMIs6cMz6ScY6YEI7li1AzuNApRadflnMx
 Do9u999NylI6q2oCLrt9y/eliJ/p5hkeCbhDrGdCgB7rPCjEAp/+Eu9Kq7FO8AYr
 Qu0rpLjvJ/5c5lsLAmUn95lZZ/uc/EPHasfZDiR8eGHRoAvPeyJ5qR06MpHFcl33
 2EKwR8RCYP9yUdqWnSKlC4LTuIpNK/BjEpHcQK2UPSn49vR8B3gVz5VXNP/7nIYQ
 hCr3VGoEOBoAlsD38IuKycXQ7vmBTU2hq7bQPq7Z6wyH96Sb6xFmVqT1Dm7uAI4+
 3OU69ugQb7WM3hQjeRRFvn5WjPqu8THwJKU7vhEf+xA09+v09QFjbHoEFabrFDlo
 MqVVhelkT6Mo8bBrxl8sZc/CG+aSl/kLQfyXWIcR2MQEAlfYKOYuDz+5TXtMZHaR
 SwlxgE2wbPP54v27yQWfBWY4d7dtJ+OX25GW1yzJdsNUFg7fQ9zzMnrv1prsUlog
 bxs4P0JcBOMLZx2IWm0R2kmbRFYjPgj6Kr3VnrIhZGesG1cwQB2QNvEPEkCtl6kq
 8HdX8Tua3dpfKAhDxnlztpVcJUmTuLn95jMWjW1KhCcjOqqJbaElq9ubplP2eMtr
 7zlfzFq9RsBKG0+J98Gt
 =vZYj
 -----END PGP SIGNATURE-----
mergetag object b3087e48ce
 type commit
 tag virtio-next-for-linus
 tagger Rusty Russell <rusty@rustcorp.com.au> 1372639977 +0930
 
 Was away, but it's all trivial and been sitting in linux-next.  So if you don't
 pull, no electrons will be harmed.
 
 Thanks,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJR0NMjAAoJENkgDmzRrbjxf3EQALoIAuQAjiEcHTGkLd/hGMJk
 mDiN14CXNH0siKASlCfcAxudJxKfIRM1tYzMFV1e7DtC7ZAH43m/SYBmXC4hRpIz
 nHsv57xtUg8bGZgb2OZKX/L0rqiE5wxtK7ZWGIPh3aE4uZKif+YvSBNJniO/HRTl
 UVDbrp+sbZzbT8NIHQ8d2vdtfG7rCNRkVaaETxk1wguu2TGJkyt0xuU3zT54We0L
 M8rJuHyTplgEMuDUydmNi9uNPZJZZY7QqoZ7s+ubXELo2FcFeyqWP2oHZnywESok
 fWOfhgdgIgmTED/eXS9wGwB7+K6azKg2chA23QZ91ncX/Ts141sEAd9ezwuQZc+5
 VS/Lo2mRvWbEcG78uYGUz+ukltZv0Og6uOvfSfCrALcVA4pYNFJTjbRu+Io+qAml
 082byeBUT/eurZr7xE30b4aTvZV2bYfqFkVynjF9ugNvTTjMiruw8uAzep6DD1gl
 38XRwtrk6MHLAFuxsyNV1FgunIWB6zvXNjMTUUVDLAQCbZwxZArr9gDd4zUG9VTS
 EbA9TIulSMMLUve5zZQyByqRLlzmzDVghMOZVbYUOQN4uNxbAPoXZ87tpiRhk8Oc
 XW+LRABjwZOjiQ9SDWRxxb8p2WTVyjuwIOTE0pLCuEBw6RFmjGga+PzH9rDygJnF
 zEIbVDRT9Jj7rOtxSabE
 =p6z7
 -----END PGP SIGNATURE-----

Merge tags 'modules-next-for-linus' and 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull trivial module and virtio fixes from Rusty Russell.

Apparently these were meant for 3.10, but came in after the release.

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  modpost.c: Add .text.unlikely to TEXT_SECTIONS

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio: remove virtqueue_add_buf().
  lguest: rename i386_head.S
  virtio_blk: Add missing 'static' qualifiers
  virtio: console: Add emergency writeonly register to config space
  virtio_pci: better macro exported in uapi
2013-07-03 13:09:06 -07:00
Linus Torvalds 1873e50028 Main features:
- KVM and Xen ports to AArch64
 - Hugetlbfs and transparent huge pages support for arm64
 - Applied Micro X-Gene Kconfig entry and dts file
 - Cache flushing improvements
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.9 (GNU/Linux)
 
 iQIcBAABAgAGBQJR0bZAAAoJEGvWsS0AyF7xTEEP/R/aRoqWwbVAMlwAhujq616O
 t4RzIyBXZXqxS9I+raokCX4mgYxdeisJlzN2hoq73VEX2BQlXZoYh8vmfY9WeNSM
 2pdfif2HF7oo9ymCRyqfuhbumPrTyJhpbguzOYrxPqpp2f1hv2D8hbUJEFj429yL
 UjqTFoONngfouZmAlwrPGZQKhBI95vvN53yvDMH0PWfvpm07DKGIQMYp20y0pj8j
 slhLH3bh2kfpS1cf23JtH6IICwWD2pXW0POo569CfZry6bI74xve+Trcsm7iPnsO
 PSI1P046ME1mu3SBbKwiPIdN/FQqWwTHW07fvMmH/xuXu3Zs/mxgzi7vDzDrVvTg
 PJSbKWD6N/IPPwKS/gCUmWWDASO0bXx3KlDuRZqAjbRojs0UPUOTUhzJM/BHUms1
 vY2QS9lAm02LmZZrk1LeKKP85gB+qKQvHuOVhIOldWeLGKtsNufz1kynz6YTqsLq
 uUB55KwbhQ7q8+aoY6lWujqiTXMoLkBgGdjHs2I407PAv7ZjlhRWk2fIry7xJifp
 rKu2cIlWsRe4CGvGI410NvIJFrGvJAV4wA43sgBDjPumyILgT/5jw9r3RpJEBZZs
 akw/Bl1CbL+gMjyoPUWgcWZdRkUCE0eLrgyMOmaYfst8cOTaWw4dWLvUG/bBZg+Y
 mGnuEQUQtAPadk8P/Sv3
 =PZ/e
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64

Pull ARM64 updates from Catalin Marinas:
 "Main features:
   - KVM and Xen ports to AArch64
   - Hugetlbfs and transparent huge pages support for arm64
   - Applied Micro X-Gene Kconfig entry and dts file
   - Cache flushing improvements

  For arm64 huge pages support, there are x86 changes moving part of
  arch/x86/mm/hugetlbpage.c into mm/hugetlb.c to be re-used by arm64"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (66 commits)
  arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board
  arm64: Add defines for APM ARMv8 implementation
  arm64: Enable APM X-Gene SOC family in the defconfig
  arm64: Add Kconfig option for APM X-Gene SOC family
  arm64/Makefile: provide vdso_install target
  ARM64: mm: THP support.
  ARM64: mm: Raise MAX_ORDER for 64KB pages and THP.
  ARM64: mm: HugeTLB support.
  ARM64: mm: Move PTE_PROT_NONE bit.
  ARM64: mm: Make PAGE_NONE pages read only and no-execute.
  ARM64: mm: Restore memblock limit when map_mem finished.
  mm: thp: Correct the HPAGE_PMD_ORDER check.
  x86: mm: Remove general hugetlb code from x86.
  mm: hugetlb: Copy general hugetlb code from x86 to mm.
  x86: mm: Remove x86 version of huge_pmd_share.
  mm: hugetlb: Copy huge_pmd_share from x86 to mm.
  arm64: KVM: document kernel object mappings in HYP
  arm64: KVM: MAINTAINERS update
  arm64: KVM: userspace API documentation
  arm64: KVM: enable initialization of a 32bit vcpu
  ...
2013-07-03 10:31:38 -07:00
strnape1@fel.cvut.cz f7b1671137 scripts: Coccinelle script for pci_free_consistent()
Created coccinelle script for reporting missing pci_free_consistent() calls.

Signed-off-by: Petr Strnad <strnape1@fel.cvut.cz>
Signed-off-by: Nicolas Palix <nicolas.palix@imag.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-03 15:50:38 +02:00
Kees Cook 90d06a4683 coccicheck: span checks across CPUs
This adds parallelism by default to the "coccicheck" target using
spatch's "-max" and "-index" arguments.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nicolas Palix <nicolas.palix@imag.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-03 15:26:29 +02:00
Daniel Tang 04130cc973 Fix a build warning in scripts/mod/file2alias.c
On some systems, __used is already defined in sys/cdefs.h and causes
a build warning:

scripts/mod/file2alias.c:85:1: warning: "__used" redefined
In file included from /usr/include/stdio.h:64,
                 from scripts/mod/modpost.h:1,
		                  from scripts/mod/file2alias.c:13:
				  /usr/include/sys/cdefs.h:146:1: warning: this is the location of the previous definition

This adds an extra check before defining the __used macro to see if
the macro was already defined elsewhere.

Signed-off-by: Daniel Tang <dt.tangr@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-03 14:30:40 +02:00
Kees Cook b57caaaed2 kconfig: allow "hex" and "range" to support longs
The parsing routines for Kconfig files use strtol(), but store and
render values as int. Switch types and formating to long to support a
wider range of values. For example, 0x80000000 wasn't representable.

Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-06-29 15:30:17 +02:00
Jan Beulich bd70134396 improve modalias building
For one, there's no point in the respective pieces to be rebuilt
unconditionally on each and every rebuild.

Second there's no need to invent a custom rule for generating the .s
file from the .c source - we can simply use the generic rule here.

And finally, $(obj) should be used to refer to files in the build tree
(rather than spelling out the subdirectory).

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-28 00:48:16 +02:00
Geert Uytterhoeven f82935ebd6 scripts/mod: Spelling s/DEVICEVTABLE/DEVICETABLE/
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-28 00:18:11 +02:00
Paul Gortmaker e24f662881 modpost: remove all traces of cpuinit/cpuexit sections
Delete all audit rules that were checking how the .cpuXYZ
related sections were inter-operating with other __init
like sections, now that __cpuinit is gone.  Update the linker
script to not have any knowledge of .cpuinit sections.

[lds.h update courtesy of Ralf Baechle <ralf@linux-mips.org>]

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-26 12:17:06 -04:00
Yann E. MORIN 490f161711 Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG"
This reverts commit 8357b48549.

It breaks more stuff than it fixes.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-26 15:49:00 +02:00
Yann E. MORIN 8357b48549 kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG
Currently, randconfig does randomise choice entries, unless KCONFIG_ALLCONFIG
is specified.

For example, given those two files (Thomas' test-case):

    ---8<--- Config.test.in
    config OPTIONA
        bool "Option A"

    choice
        prompt "This is a choice"

    config CHOICE_OPTIONA
        bool "Choice Option A"

    config CHOICE_OPTIONB
        bool "Choice Option B"

    endchoice

    config OPTIONB
        bool "Option B"
    ---8<--- Config.test.in

    ---8<--- config.defaults
    CONFIG_OPTIONA=y
    ---8<--- config.defaults

And running:
    ./scripts/kconfig/conf --randconfig Config.test.in

does properly randomise the two choice symbols (and the two booleans).

However, running:
    KCONFIG_ALLCONFIG=config.defaults \
    ./scripts/kconfig/conf --randconfig Config.test.in

does *not* reandomise the two choice entries, and only CHOICE_OPTIONA
will ever be selected. (OPTIONA will always be set (expected), and
OPTIONB will be be properly randomised (expected).)

This patch defers setting that a choice has a value until a symbol for
that choice is indeed set, so that choices are properly randomised when
KCONFIG_ALLCONFIG is set, but not if a symbol for that choice is set.

Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>

---
Changes v3 -> v4
  - fix previous issue where some choices would not be set, which would
    cause silentoldconfig to ask for them and was then breaking this
    workflow (as reported by Arnd and Sedat):
        KCONFIG_ALLCONFIG=foo.defconfig make randconfig
        make silentoldconfig </dev/nullo
    which I have tested (3h28min!) with:
        touch defconfig
        for(( i=0; i<10000; i++ )); do
            KCONFIG_ALLCONFIG=$(pwd)/defconfig make randconfig >/dev/null 2>&1
            make silentoldconfig </dev/null >/dev/null 2>&1 || break
        done
    which did not break at all.
  - change done in v3 (below) is already fixed by a previous patch

Changes v2 -> v3
  - ensure only one symbol is set in a choice

Changes v1 -> v2:
  - further postpone setting that a choice has a value until
    one is indeed set
  - do not print symbols that are part of an invisible choice
2013-06-24 20:03:31 +02:00
Yann E. MORIN 3b9a19e089 kconfig: loop as long as we changed some symbols in randconfig
Because of choice-in-a-choice constructs, it can happen that not all
symbols are assigned a value during randconfig, leading in rare cases
to this situation:

    ---8<--- choice-in-choice.in
    choice
        bool "A/B/C"
    config A
        bool "A"

    config B
        bool "B"
    if B
    choice
        bool "E/F"
    config E
        bool "E"
    config F
        bool "F"
    endchoice
    endif # B

    config C
        bool "C"
    endchoice
    ---8<---

    $ ./scripts/kconfig/conf --randconfig choice-in-choice.in
    [--SNIP--]
    $ ./scripts/kconfig/conf --silentoldconfig choice-in-choice.in </dev/null
    [--SNIP--]
    A/B/C
      1. A (A)
    > 2. B (B)
      3. C (C)
    choice[1-3]: 2
      E/F
      > 1. E (E) (NEW)
        2. F (F) (NEW)
      choice[1-2]: aborted!

    Console input/output is redirected. Run 'make oldconfig' to update
    configuration.

Fix this by looping in randconfig for as long as some symbol gets assigned
a value.

Note: this was spotted with the USB EHCI Debug Device Gadget (USB_G_DBGP),
which uses this choice-in-a-choice construct, and exhibits this problem.
The example above is just a stripped-down minimalist test-case.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-06-24 20:03:30 +02:00
Yann E. MORIN a1ce636f56 kconfig/[mn]conf: make it explicit in the search box that a regexp is possible
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Michal Marek <mmarek@suse.cz>
2013-06-24 20:01:37 +02:00
Yann E. MORIN 193b40aeb5 kconfig: sort found symbols by relevance
When searching for symbols, return the symbols sorted by relevance.

Sorting is done as thus:
  - first, symbols that match exactly
  - then, alphabetical sort

Since the search can be a regexp, it is possible that more than one symbol
matches exactly. In this case, we can't decide which to sort first, so we
fallback to alphabeticall sort.

Explain this (new!) sorting heuristic in the documentation.

Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Roland Eggner <edvx1@systemanalysen.net>
Cc: Wang YanQing <udknight@gmail.com>

--
Changes v1->v2:
  - drop the previous, complex heuristic in favour of a simpler heuristic
    that is both easier to understand, *and* to maintain (Jean)
  - explain sorting heuristic in the doc  (Jean)
2013-06-24 19:57:45 +02:00
Mike Marciniszyn c398ff00f5 kbuild: fix error when building from src rpm
The following issue can be reproduced with Linus' tree on
an x86_64 server.

>+ cp /home/user/rpmbuild-test/BUILDROOT/kernel-3.9.2.x86_64/boot/vmlinuz-3.9.2
>cp: missing destination file operand after
>/home/user/rpmbuild-test/BUILDROOT/kernel-3.9.2-1.x86_64/boot/vmlinuz-3.9.2'
>Try `cp --help' for more information.
>error: Bad exit status from /var/tmp/rpm-tmp.R4o0iI (%install)

Here are the commands to reproduce:

make defconfig
make rpm-pkg

Use the resulting src rpm to build as follows:

mkdir ~/rpmbuild-test
cd ~/rpmbuild-test
rpmbuild --rebuild --define "_topdir `pwd`" -vv ~/rpmbuild/SRPMS/kernel-3.10.0_rc1+-1.src.rpm

The issue is because the %install script uses $KBUILD_IMAGE and it hasn't
been set since it is only available in the kbuild system and not in the
%install script.

This patch adds a Makefile target to emit the image_name that can be used
and modifies the mkspec to use the dynamic name in %install.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-24 15:26:14 +02:00
Christian Kujau cdf2bc632e scripts/setlocalversion on write-protected source tree
I just stumbled across another[0] issue when scripts/setlocalversion
operates on a write-protected source tree. Back then[0] the source tree
was on an read-only NFS share, so "test -w" was introduced before "git
update-index" was run.

This time, the source tree is on read/write NFS share, but the permissions
are world-readable and only a specific user (or root) can write.
Thus, "test -w ." returns "0" and then runs "git update-index",
producing the following message (on a dirty tree):

  fatal: Unable to create '/usr/local/src/linux-git/.git/index.lock': Permission denied

While it says "fatal", compilation continues just fine.

However, I don't think a kernel compilation should alter the source
tree (or the .git directory) in any way and I don't see how removing
"git update-index" could do any harm. The Mercurial and SVN routines in
scripts/setlocalversion don't have any tree-modifying commands, AFAICS.
So, maybe the patch below would be acceptable.

[0] https://patchwork.kernel.org/patch/29718/

Signed-off-by: Christian Kujau <lists@nerdbynature.de>
Cc: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-24 00:08:01 +02:00
Yann E. MORIN a5f6d795f5 kconfig/conf: print the seed used to initialise the RNG for randconfig
... so the user has a chance to reproduce a test-case.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-06-18 23:59:01 +02:00
Yann E. MORIN e85ac12443 kconfig/conf: accept a base-16 seed for randconfig
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-06-18 23:59:00 +02:00
Yann E. MORIN e6abf12a77 kconfig/conf: fix randconfig setting multiple symbols in a choice
Currently, randconfig may set more than one symbol in a given choice.
Given this config file:
    config A
        bool "A"
    if A
    choice
        bool "B/C/D"
    config B
        bool "B"
    config C
        bool "C"
    config D
        bool "D"
    endchoice
    endif # A

Then randconfig generates such .config files (case where A is not set is not
shown below for brevity), and where only the right-most .config is valid:
  CONFIG_A=y                  CONFIG_A=y                  CONFIG_A=y
  CONFIG_B=y                  CONFIG_B=y                  CONFIG_B=y
  CONFIG_C=y                  # CONFIG_C is not set       # CONFIG_C is not set
  # CONFIG_D is not set       CONFIG_D=y                  # CONFIG_D is not set

That is, in a randomised choice, the first symbol is always selected,
and at most one other symbol may be selected.

This is due to symbol randomised in a choice not being properly flagged
as having a value.

Fix that by flagging those symbols adequately: have a user-defined value,
and be not valid (to force recalculation of the symbol).

Note: if the choice is not conditional, then the randomisation is properly
done.

Reported-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
[yann.morin.1998@free.fr: independently re-done the same patch as Matthieu,
                          as pointed out by Sedat]
Cc: Arnaud Lacombe <lacombar@gmail.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-06-18 23:59:00 +02:00
Clement Chauplannaz 7387778510 scripts/config: replace hard-coded script name by a dynamic value
The script `config' prints its name in usage() function. It is currently
hard-coded to value `config'. However, the script may be reused under
a different name in contexts other than the Linux Kernel.

Replace the hard-coded value `config' by the name of the script at runtime.

Signed-off-by: Clement Chauplannaz <chauplac@gmail.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2013-06-18 23:58:59 +02:00
Dirk Gouders 1278ebdbc3 mconf/nconf: mark empty menus/menuconfigs different from non-empty ones
Submenus are sometimes empty and it would be nice if there is
something that notifies us that we should not expect any content
_before_ we enter a submenu.

A new function menu_is_empty() was introduced and empty menus and
menuconfigs are now marked by "----" as opposed to non-empty ones that
are marked by "--->".

This scheme was suggested by "Yann E. MORIN" <yann.morin.1998@free.fr>.

Signed-off-by: Dirk Gouders <dirk@gouders.net>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-06-18 23:58:59 +02:00
Dirk Gouders e0b42605e6 nconf: use function calls instead of ncurses' variables LINES and COLS
According to the documentation [1], LINES and COLS are initialized by
initscr(); it does not say anything about the behavior when windows are
resized.

Do not rely on the current implementation of ncurses that updates
these variables on resize, but use the propper function calls or macros
to get window dimensions.

The use of the variables in main() was OK, but for the sake of
consistency it was modified to use the macro getmaxyx().

[1] ncurses(3X)

Signed-off-by: Dirk Gouders <dirk@gouders.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: declare 'lines' and 'columns' on a single line]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2013-06-18 23:58:58 +02:00
Dirk Gouders 4f2de3e199 mconf: use function calls instead of ncurses' variables LINES and COLS
According to the documentation [1], LINES and COLS are initialized by
initscr(); it does not say anything about the behavior when windows are
resized.

Do not rely on the current implementation of ncurses that updates
these variables on resize, but use the propper function calls to get
window dimensions.

init_dialog() could make use of the variables, but for the sake of
consistency we do not change it's current use of the macro getmaxyx().

[1] ncurses(3X)

Signed-off-by: Dirk Gouders <dirk@gouders.net>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2013-06-18 23:58:58 +02:00
Dirk Gouders 1376391621 kconfig/lxdialog: handle newline characters in print_autowrap()
When exiting menuconfig with unsaved changes, a dialog like
the following is shown:

        Do you wish to save your new configuration ? <ESC><ESC>
        to continue.

The author of the dialog text specified a newline after the '?',
and probably expected it to be processed, so let print_autowrap()
handle newlines propperly.

Also, reword that dialog's second phrase with a real sentence.

Signed-off-by: Dirk Gouders <dirk@gouders.net>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: very slightly tweak the commit message]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2013-06-18 23:58:57 +02:00
Sedat Dilek ff7b0c2c24 kconfig/lxdialog: Use new mininimum resize definitions in conf_choice()
This is a cleanup which uses the proper (new) definitions and does
not change current behaviour.

Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

---
Yann had some more ideas on improvements:

"What would be nice is an improvement that scales the choice window to
the number of entries in the choice. If there are a lot of choice
entries, then the choice popup grows in height (but does not overflow
the screen of course). So, instead of seeing only 6 entries, we'd see
as much as possible in the current screen.

Ditto for the width: the popup adapts to the longest prompt (but does
not overflow the screen either, of course), so prompts are not
truncated."

NOTE: This patch requires [1].

[1] http://marc.info/?l=linux-kbuild&m=137128726917166&w=2
2013-06-18 23:58:57 +02:00
Sedat Dilek 851f665725 kconfig/lxdialog: Add definitions for mininimum (re)size values
Commit c8dc68ad0f ("kconfig/lxdialog: support resize") added support
for resizing, but forgot to collect all hardcoded values at one single
place.

Also add a definition for the check for a minimum screen/window size
of 80x19.

[ ChangeLog v3:
  * Rename MENU_{HEIGTH,WIDTH}_MIN -> MENUBOX_{HEIGTH,WIDTH}_MIN
  ChangeLog v2:
  * Rename WIN_{HEIGTH,WIDTH}_MIN -> WINDOW_{HEIGTH,WIDTH}_MIN
  * Mention the check for a minimum screen/window size in the changelog
  * Add a comment above the block of new definitions ]

Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Wang YanQing <udknight@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-06-16 11:09:56 +02:00
Arve Hjønnevåg fbe98bb9ed kconfig: Fix defconfig when one choice menu selects options that another choice menu depends on
The defconfig and Kconfig combination below, which is based on 3.10-rc4
Kconfigs, resulted in several options getting set to "m" instead of "y".

defconfig.choice:
---8<---
CONFIG_MODULES=y
CONFIG_USB_ZERO=y
---8<---

Kconfig.choice:
---8<---
menuconfig MODULES
	bool "Enable loadable module support"

config CONFIGFS_FS
	tristate "Userspace-driven configuration filesystem"

config OCFS2_FS
        tristate "OCFS2 file system support"
        depends on CONFIGFS_FS
        select CRC32

config USB_LIBCOMPOSITE
	tristate
	select CONFIGFS_FS

choice
	tristate "USB Gadget Drivers"
	default USB_ETH

config USB_ZERO
	tristate "Gadget Zero (DEVELOPMENT)"
	select USB_LIBCOMPOSITE

config USB_ETH
	tristate "Ethernet Gadget (with CDC Ethernet support)"
	select USB_LIBCOMPOSITE

endchoice

config CRC32
        tristate "CRC32/CRC32c functions"
        default y

choice
        prompt "CRC32 implementation"
        depends on CRC32
        default CRC32_SLICEBY8

config CRC32_SLICEBY8
        bool "Slice by 8 bytes"

endchoice
---8<---

$ scripts/kconfig/conf --defconfig=defconfig.choice Kconfig.choice

would result in:

.config:
---8<---
CONFIG_MODULES=y
CONFIG_CONFIGFS_FS=m
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_ZERO=m
CONFIG_CRC32=y
CONFIG_CRC32_SLICEBY8=y
---8<---

when the expected result would be:

.config:
---8<---
CONFIG_MODULES=y
CONFIG_CONFIGFS_FS=y
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_ZERO=y
CONFIG_CRC32=y
CONFIG_CRC32_SLICEBY8=y
---8<---

Signed-off-by: Arve Hjønnevåg <arve@android.com>
[yann.morin.1998@free.fr: add the resulting .config to commit log,
                          remove unneeded USB_GADGET from the defconfig]
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2013-06-16 11:00:30 +02:00
Julia Lawall 61cb48c3f9 scripts/coccinelle: check for field address argument to kfree
The argument to kfree should not be the address of a structure field.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-14 15:33:08 +02:00
Nicolas Palix 1f0a6742dd Coccinelle: Make 'report' the default mode
It appears that the 'report' mode is the one always
provided by the semantic patches included in the kernel.
It is thus more natural to select it by default.

The 'chain' mode is however kept and the 'patch' mode
is still the first tried in that case.

Signed-off-by: Nicolas Palix <nicolas.palix@imag.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-14 15:26:47 +02:00
Grant Likely 706b78f37f dtc: ensure #line directives don't consume data from the next line
Previously, the #line parsing regex ended with ({WS}+[0-9]+)?. The {WS}
could match line-break characters. If the #line directive did not contain
the optional flags field at the end, this could cause any integer data on
the next line to be consumed as part of the #line directive parsing. This
could cause syntax errors (i.e. #line parsing consuming the leading 0
from a hex literal 0x1234, leaving x1234 to be parsed as cell data,
which is a syntax error), or invalid compilation results (i.e. simply
consuming literal 1234 as part of the #line processing, thus removing it
from the cell data).

Fix this by replacing {WS} with [ \t] so that it can't match line-breaks.

Convert all instances of {WS}, even though the other instances should be
irrelevant for any well-formed #line directive. This is done for
consistency and ultimate safety.

[Cherry picked from DTC commit a1ee6f068e1c8dbc62873645037a353d7852d5cc]

Reported-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-06-13 22:12:15 +01:00
Grant Likely 2a6a08ca5e dtc: Update generated files to output from Bison 2.5
This patch merely updates the generated dtc parser and lexer files to
the output generated by Bison 2.5. The previous versions were generated
from version 2.4.1. The only reason for this commit is to minimize the
diff on the next commit which fixes a bug in the DTC #line directive
parsing. Otherwise the Bison changes would be intermingled with the
functional changes.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-06-13 22:12:14 +01:00
Ian Campbell b0a4d8b3cf kbuild: make sure we clean up DTB temporary files
Various temporary files used when building DTB files were not suffixed with
.tmp and therefore were not cleaned up by "make clean".

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-13 22:12:13 +01:00
James Hogan 1c00a47e48 Makefile.lib: align DTB quiet_cmd
The unaligned dtb.S filename in make output started to irritate me:
  DTC     arch/metag/boot/dts/skeleton.dtb
  DTB    arch/metag/boot/dts/skeleton.dtb.S
  AS      arch/metag/boot/dts/skeleton.dtb.o
  LD      arch/metag/boot/dts/built-in.o

Add an extra space to quiet_cmd_dt_S_dtb so the dtb.S filename aligns
with all the others.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Dirk Brandewie <dirk.brandewie@gmail.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: trivial@kernel.org
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-13 15:59:39 +02:00
Will Deacon adace89562 arm64: extable: sort the exception table at build time
As is done for other architectures, sort the exception table at
build-time rather than during boot.

Since sortextable appears to be a standalone C program relying on the
host elf.h to provide EM_AARCH64, I've had to add a conditional check in
order to allow cross-compilation on machines that aren't running a
bleeding-edge libc-dev.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-06-12 11:23:01 +01:00
Michal Marek 42a0940d9d Merge branch 'yem-kconfig-rc-fixes' of git://gitorious.org/linux-kconfig/linux-kconfig into kbuild/rc-fixes 2013-05-30 15:21:48 +02:00
Dirk Gouders e983b7b17a kconfig/menu.c: fix multiple references to expressions in menu_add_prop()
menu_add_prop() applies upper menus' visibilities to actual prompts
by AND-ing the prompts visibilities with the upper menus ones.

This creates a further reference to the menu's visibilities and when
the expression reduction functions do their work, they may remove or
modify expressions that have multiple references, thus causing
unpredictable side-effects.

The following example Kconfig constructs a case where this causes
problems: a menu and a prompt which's visibilities depend on the same
symbol.  When invoking mconf with this Kconfig and pressing "Z" we
see a problem caused by a free'd expression still referenced by the
menu's visibility:

------------------------------------------------------------------------
mainmenu "Kconfig Testing Configuration"

config VISIBLE
	def_bool n

config Placeholder
	bool "Place holder"

menu "Invisible"
	visible if VISIBLE

config TEST_VAR
	bool "Test option" if VISIBLE

endmenu
------------------------------------------------------------------------

This patch fixes this problem by creating copies of the menu's
visibility expressions before AND-ing them with the prompt's one.

Signed-off-by: Dirk Gouders <dirk@gouders.net>
[yann.morin.1998@free.fr: move variable into its block-scope,
                          keep lines <80 chars, typo]
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-05-30 00:14:01 +02:00
Dirk Gouders 063f4661fd mconf: handle keys in empty dialogs
When entering an empty dialog, using the movement keys resulted in
unexpected characters beeing displayed, other keys like "z" and "h"
did not work as expected.

This patch handles the movement keys as well as other keys, especially
"z", "h" and "/".

Signed-off-by: Dirk Gouders <dirk@gouders.net>
[yann.morin.1998@free.fr: keep lines <80 chars, so reorder test]
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-05-30 00:13:32 +02:00
Matthijs Kooijman ad06156876 kbuild: Don't assume dts files live in arch/*/boot/dts
In commit b40b25ff (kbuild: always run gcc -E on *.dts, remove cmd_dtc_cpp),
dts building was changed to always use the C preprocessor. This meant
that the .dts file passed to dtc is not the original, but the
preprocessed one.

When compiling with a separate build directory (i.e., with O=), this
preprocessed file will not live in the same directory as the original.
When the .dts file includes .dtsi files, dtc will look for them in the
build directory, not in the source directory and compilation will fail.

The commit referenced above tried to fix this by passing arch/*/boot/dts
as an include path to dtc. However, for mips, the .dts files are not in
this directory, so dts compilation on mips breaks for some targets.

Instead of hardcoding this particular include path, this commit just
uses the directory of the .dts file that is being compiled, which
effectively restores the previous behaviour wrt includes. For most .dts
files, this path is just the same as the previous hardcoded
arch/*/boot/dts path.

This was tested on a mips (rt3052) and an arm (bcm2835) target.

Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-05-23 10:14:34 +02:00
Clement Chauplannaz 57a9c7609d scripts/config: fix assignment of parameters for short version of --*-after options
When --*-after options are used, two parameters are parsed from the
command-line before the adequate function is called:
  - the `before' option, after which the new option will be inserted,
  - the name of the option to enable/disable/modularise.

With the short version of --*-after options (namely -E, -D, -M), the
parsing step is not performed which leads to processing unset variables.

Add options -E, -D, -M to the test that triggers assignment of parameters
for --*-after options.

Signed-off-by: Clement Chauplannaz <chauplac@gmail.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2013-05-20 14:15:17 +02:00
Tom Rini 06df44ee41 modpost.c: Add .text.unlikely to TEXT_SECTIONS
gcc's places cold functions into the .text.unlikely section and we
need to check this section as well for section mismatches otherwise we
may have false negatives for this test.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (wording update)
2013-05-20 12:08:45 +09:30
Nicolas Dichtel c0ff68f161 kbuild: fix make headers_install when path is too long
If headers_install is executed from a deep/long directory structure, the
shell's maximum argument length can be execeeded, which breaks the operation
with:

| make[2]: execvp: /bin/sh: Argument list too long
| make[2]: ***

Instead of passing each files name with the entire path, I give only the file
name without the source path and give this path as a new argument to
headers_install.pl.

Because there is three possible paths, I have tree input-files list, one per
path.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-05-17 22:10:35 +02:00
Luiz Capitulino f66ba56094 package: Makefile: unbreak binrpm-pkg target
Commit 6501320311 dropped the rpm spec as a
prerequisite for the binrpm-pkg target but forgot to update $< usage,
which causes the rule to break.

This commit fixes that by replacing $< with the spec name.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-05-16 09:46:45 +02:00
Linus Torvalds b9e306e07e Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull misc kbuild updates from Michal Marek:
 "Non-critical kbuild changes:

   - make coccicheck improvements, but no new semantic patches this time

   - make rpm improvements

   - make tar-pkg change to include the architecture in the filename.

     This is a deliberate incompatibility, but nobody has complained so
     far and it is useful if you build for different architectures.  It
     also matches what the deb-pkg and rpm-pkg targets produce.

   - kbuild documentation fix"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  rpm-pkg: Remove pointless set -e statements
  rpm-pkg: Always regenerate the specfile
  rpm-pkg: Do not write to the parent directory
  rpm-pkg: Do not package the whole source directory
  buildtar: Add ARCH to the archive name
  Coccinelle: Fix patch output when coccicheck is used with M= and C=
  Coccinelle: Add support to the SPFLAGS variable
  Coccinelle: Cleanup the setting of the FLAGS and OPTIONS variables
  Coccinelle: Restore coccicheck verbosity in ONLINE mode (C=1 or C=2)
  scripts/package/Makefile: compare objtree with srctree instead of test KBUILD_OUTPUT
  doc: change example to existing Makefile fragment
  scripts/tags.sh: Add magic for OFFSET and DEFINE
2013-05-07 07:59:19 -07:00
Linus Torvalds 685e56d294 Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig updates from Michal Marek:
 - use pkg-config to detect curses libraries
 - clean up the way curses headers are searched
 - Some randconfig fixes, of which one had to be reverted
 - KCONFIG_SEED for randconfig debugging
 - memuconfig memory leak plugged
 - menuconfig > breadcrumbs > navigation
 - xconfig compilation fix
 - Other minor fixes

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: fix lists definition for C++
  Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG"
  kconfig: implement KCONFIG_PROBABILITY for randconfig
  kconfig: allow specifying the seed for randconfig
  kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG
  kconfig: do not override symbols already set
  kconfig: fix randconfig tristate detection
  kconfig/lxdialog: rationalise the include paths where to find {.n}curses{,w}.h
  menuconfig: Add "breadcrumbs" navigation aid
  menuconfig: Fix memory leak introduced by jump keys feature
  merge_config.sh: Avoid creating unnessary source softlinks
  kconfig: optionally use pkg-config to detect ncurses libs
  menuconfig: optionally use pkg-config to detect ncurses libs
2013-05-07 07:58:05 -07:00
Linus Torvalds 57c29bd3cd Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild changes from Michal Marek:
 "Kbuild commits for v3.10-rc1:

   - Fix make mrproper after mod/file2alias rework
   - Fix ld-option Makefile function
   - Rewrite headers_install to shell to drop Perl dependency.

  There are some more patches I have to look at, so I might send another
  pull request later.  Or just queue them for 3.11."

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  Fix cleaning in scripts/mod
  headers_install.pl: convert to headers_install.sh
  kbuild: fix ld-option function
2013-05-07 07:56:26 -07:00
Li Zefan 383da76f52 menuconfig: fix NULL pointer dereference when searching a symbol
Searching for PPC_EFIKA results in a segmentation fault, and it's
because get_symbol_prop() returns NULL.

In this case CONFIG_PPC_EFIKA is defined in arch/powerpc/platforms/
52xx/Kconfig, so it won't be parsed if ARCH!=PPC, but menuconfig knows
this symbol when it parses sound/soc/fsl/Kconfig:

    config SND_MPC52xx_SOC_EFIKA
        tristate "SoC AC97 Audio support for bbplan Efika and STAC9766"
        depends on PPC_EFIKA

This bug was introduced by commit bcdedcc1af ("menuconfig: print more
info for symbol without prompts").

Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Tested-by: Libo Chen <libo.chen@huawei.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07 07:55:36 -07:00
Andreas Schwab 22fc4273c7 Fix cleaning in scripts/mod
Make sure devicetable-offsets.h is cleaned in the scripts/mod directory

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-05-06 23:40:54 +02:00
Linus Torvalds f8ce1faf55 We get rid of the general module prefix confusion with a binary config option,
fix a remove/insert race which Never Happens, and (my favorite) handle the
 case when we have too many modules for a single commandline.  Seriously,
 the kernel is full, please go away!
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRgbGEAAoJENkgDmzRrbjx2+QP/jXs93K/sXw3rL0vBklwCFv6
 IPZmqYZiGjrzqlB4coWkgYRwW1oOsREfAjF5MmfPdykS3fO5kXfdxN4FBdfKp+IZ
 RdsycdGDuSxWomgYsivrrxLBDxDAX1VuBOjr6mu5Uuk/pCjFa61cfJDiErsu0jKz
 2EMTc98A+E71XamJdvbtal5MUIu9yeluJWG2ux2+VbCul4MSpMc//0n2nrws/RCB
 AoC96AT/Xf4U10a8zT8RfCJ29M5Vvx/KfTIcFiZvtCQxEaHNNmj831gDNiw/3jFI
 ndRph+VLHBsMoBMxfzNRrM+evqkq8+AGEGRj3ycQy5Pa6DunPyzMafWOVGBGnmaS
 tl9hATGx1438048i5tUn8ieAYG1YL1HM83hQovpCThfUKQMiq186iDt1SYYmlq3g
 0thj3znQqZDYhboPtgWzOMUdqOG/iBIKjhGQjjHZs+MInFgxL2hmax0gBNkvEtQb
 oLyfGbF6UjS7I/Md/HohnUQ4xr9kYa3MQeqPjKbRwgHRkdXhzTEZtI+MYDJBxOnW
 QGVQ97aJ2WA7vC7sz/1VhTcZqmU5zfrSc8lF+Ea+H8dQGHHbz8HxKQacEvKcMrXl
 OJyEkRUWDA0MTjeIHzn2fff9Q6/qqA1QejRiFofGJrpxopcJS84/7yA0repxvuMG
 yaMPsLq53UW37/AXYsho
 =MPiD
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull mudule updates from Rusty Russell:
 "We get rid of the general module prefix confusion with a binary config
  option, fix a remove/insert race which Never Happens, and (my
  favorite) handle the case when we have too many modules for a single
  commandline.  Seriously, the kernel is full, please go away!"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  modpost: fix unwanted VMLINUX_SYMBOL_STR expansion
  X.509: Support parse long form of length octets in Authority Key Identifier
  module: don't unlink the module until we've removed all exposure.
  kernel: kallsyms: memory override issue, need check destination buffer length
  MODSIGN: do not send garbage to stderr when enabling modules signature
  modpost: handle huge numbers of modules.
  modpost: add -T option to read module names from file/stdin.
  modpost: minor cleanup.
  genksyms: pass symbol-prefix instead of arch
  module: fix symbol versioning with symbol prefixes
  CONFIG_SYMBOL_PREFIX: cleanup.
2013-05-05 10:58:06 -07:00
Linus Torvalds dfab34aa61 ARM: arm-soc device-tree updates for 3.10, part 1
Device-tree updates for 3.10. The bulk of the churn in this branch is due
 to i.MX moving from C-defined pin control over to device tree, which is
 a one-time conversion that will allow greater flexibility down the road.
 
 Besides that, there's PCI-e bindings for Marvell mvebu platforms and a
 handful of cleanups to tegra due to the new include file functionality
 of the device tree compiler.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRgg+aAAoJEIwa5zzehBx3/q0P/RumfsMePxhmSU4HM16a3w0B
 9jg7wd9BxVrJUzTY9F7z+Q72x0u5USUtVnyoY5s68DQMkFyhBQUuKCCiwCqtpCBN
 2Uf0JQjYHdqEFKgN6DiPxSVRPXC8jmMzYGRk5RTI5kVWxaBEMdw9rTo0x4vol/Cv
 7Z+W+gixXZbgydH/ogqly1MQc9vWliRTfU2zv2WOZ7TLyyEd2lOjMMBIX/n3vI4l
 T32JOUDgIYK841s9n2eNQGEjqB/OghMMrQsdjUAd++je6QtqgZk9+uHfPFC1C0wQ
 3F93te9HleluYcOcxGmedK3B9QO2Y8y1XHe+uxLZVKXBR+6/5AtSwZFRQm10uMCI
 JUz3j6tRAWDAOin2vXZcf2CVPn5HZbh3D67WuUdfxMngH0XHvSZRC9eRd70jWvDe
 9FY4NRTjRSLu/VtgCzF8tSA3cEylhyKYdK6Cf0nbwQ26JTO2VNNCnjuCbRfWp+E1
 y0jIQwsaiNLEBwbesNbnFrj+YTTAZBI4+Y5HrSV7Og5/5X9BWs11KAkRppNOj0Uc
 WnqG26SssuBNBVHPOO2RrOwq3n2VphQ/BB8j9yrpWtcAlQxdjmVqFj/GIIiHr2Wm
 GuKWgM5fn+xF0oeCriq4Ti5eCJQ7Ev6Er46WrGQDBniZWVi05aP51ks1bfwbfHqn
 z1o5QfLpr4PkJPk0mnim
 =8X1b
 -----END PGP SIGNATURE-----

Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device-tree updates from Olof Johansson:
 "Part 1 of device-tree updates for 3.10.  The bulk of the churn in this
  branch is due to i.MX moving from C-defined pin control over to device
  tree, which is a one-time conversion that will allow greater
  flexibility down the road.

  Besides that, there's PCI-e bindings for Marvell mvebu platforms and a
  handful of cleanups to tegra due to the new include file functionality
  of the device tree compiler"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (113 commits)
  arm: mvebu: PCIe Device Tree informations for Armada XP GP
  arm: mvebu: PCIe Device Tree informations for Armada 370 DB
  arm: mvebu: PCIe Device Tree informations for Armada 370 Mirabox
  arm: mvebu: PCIe Device Tree informations for Armada XP DB
  arm: mvebu: PCIe Device Tree informations for OpenBlocks AX3-4
  arm: mvebu: add PCIe Device Tree informations for Armada XP
  arm: mvebu: add PCIe Device Tree informations for Armada 370
  ARM: sunxi: unify osc24M_fixed and osc24M
  arm: vt8500: Add SDHC support to WM8505 DT
  ARM: dts: Add a 64 bits version of the skeleton device tree
  ARM: mvebu: Add Device Bus and CFI flash memory support to defconfig
  ARM: mvebu: Add support for NOR flash device on Openblocks AX3 board
  ARM: mvebu: Add support for NOR flash device on Armada XP-GP board
  ARM: mvebu: Add Device Bus support for Armada 370/XP SoC
  ARM: dts: imx6dl-wandboard: Add USB Host support
  ARM: dts: imx51 cpu node
  ARM: dts: Add missing imx27-phytec-phycore dtb target
  ARM: dts: Add NFC support for i.MX27 Phytec PCM038 module
  ARM: i.MX51: Add PATA support
  ARM: dts: Add initial support for Wandboard Dual-Lite
  ...
2013-05-02 09:28:03 -07:00
Wengmeiling bcdedcc1af menuconfig: print more info for symbol without prompts
When we search a config symbol, if it has no prompt the position of this
symbol in the Kconfig file and it's dependencies are not printed.  This
can be inconvenient, especially when it's set to n and we want to find out
why.

the following is an example:

before:

Symbol: GENERIC_SMP_IDLE_THREAD [=y]
Type  : boolean
  Selected by: X86 [=y]

after:

Symbol: GENERIC_SMP_IDLE_THREAD [=y]
Type  : boolean
  Defined at arch/Kconfig:213
  Selected by: X86 [=y]

Signed-off-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Libo Chen <libo.chen@huawei.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 17:04:09 -07:00
Linus Torvalds 500fcbc4a9 A bug was recently found in the make localmodconfig where it would miss
dependencies of config files are include in other config files inside
 an if statement.
 
 Also added a debug print that helped in solving this bug.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJRfwGyAAoJEOdOSU1xswtMsfIIAJAHT1Zvp25mcKB/eQb9aTsy
 bTJObwRPKovIIEXpHK4142/5Fn6okI9fGWTUfyMMCaxPdt82bn5IUMAeA7N35jEA
 gvVMtYlYGTblb6vG0xd1pVifihsl4iXfFsDDeAYWDOqmdoWGh14FUpyj2PoL3L5j
 RYNjsy54sV9+WuY4+BWd56s21IES7VRgSjYa8AAx9VBqxgxPggGqidHaP5QYK+ah
 NfIklYFBpdUMi+0hGRN8HrWlToA+1XKa6Acc3oq+0A8cAZFab9OMd+XvOJrBAl80
 kUSTY1Ga7MuccbwqLmRdUswjA+tWJ2EYdfS+Pf22UDqUgyGb93EAt7/eR6Ugexw=
 =YjLR
 -----END PGP SIGNATURE-----

Merge tag 'localmodconfig-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig

Pull localmodconfig changes from Steven Rostedt:
 "A bug was recently found in the make localmodconfig where it would
  miss dependencies of config files are include in other config files
  inside an if statement.

  Also added a debug print that helped in solving this bug."

* tag 'localmodconfig-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig:
  localmodconfig: Process source kconfig files as they are found
  localmodconfig: Add debug prints for dependencies of module configs
2013-04-30 07:20:33 -07:00
Mugunthan V N 8543ae1296 checkpatch: add Suggested-by as a standard signature
As people started using Suggested-by as standard signature, adding
"Suggested-by" to the standard signature so that checkpatch won't
generate warning when Suggested-by is used in patch signature

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 18:28:20 -07:00
Matthijs Kooijman 74c8f4336d checkpatch: only warn for empty lines before closing braces by themselves
This check was intended to catch extra newlines at the end of a function
definition, but it would trigger on any closing brace, including those
of inline functions and macro definitions, triggering false positives.
Now, only closing braces on a line by themselves trigger this check.

Tested with:

$ cat test.h
/* test.h - Test file */

static inline int foo(void) { return 0; }

static inline int bar(void)
{
        return 1;

}

$ ./scripts/checkpatch.pl --strict -f test.h # Before this commit
CHECK: Blank lines aren't necessary before a close brace '}'
+
+static inline int foo(void) { return 0; }

CHECK: Blank lines aren't necessary before a close brace '}'
+
+}

total: 0 errors, 0 warnings, 2 checks, 9 lines checked

$ ./scripts/checkpatch.pl --strict -f test.h # After this commit
CHECK: Blank lines aren't necessary before a close brace '}'
+
+}

total: 0 errors, 0 warnings, 1 checks, 9 lines checked

Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Cc: Andy Whitcroft <apw@canonical.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 18:28:20 -07:00
Joe Perches 5646bc71b3 checkpatch: warn on space before semicolon
Make space before semicolon a warning instead of a --strict CHK test.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 18:28:20 -07:00
Joe Perches 04db4d25d9 checkpatch: complain about executable files
Complain about files with an executable bit set that are not in a scripts/
directory and are not type .pl, .py, .awk, or .sh

Based on an initial patch from Stephen.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 18:28:20 -07:00
Joe Perches a6962d7273 checkpatch: Prefer seq_puts to seq_printf
Add a check for seq_printf use with a constant format without additional
arguments.  Suggest seq_puts instead.

Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 18:28:19 -07:00
Joe Perches 972fdea2e6 checkpatch: add check for reuse of krealloc arg
On Thu, 2013-03-14 at 13:30 +0000, David Woodhouse wrote:
> If krealloc() returns NULL, it *doesn't* free the original. So any code
> of the form 'foo = krealloc(foo, …);' is almost certainly a bug.

So add a check for it to checkpatch.

Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 18:28:19 -07:00
Stephen Warren bbbe96ed89 get_maintainer: use filename-only regex match for Tegra
Create a new N: entry type in MAINTAINERS which performs a regex match
against filenames; either those extracted from patch +++ or --- lines,
or those specified on the command-line using the -f option.

This provides the same benefits as using a K: regex option to match a
set of filenames (see commit eb90d0855b "get_maintainer: allow
keywords to match filenames"), but without the disadvantage that
"random" file content, such as comments, will ever match the regex.
Hence, revert most of that commit.

Switch the Tegra entry from using K: to N:

[akpm@linux-foundation.org: fix typo in docs, per Marcin]
Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 18:28:14 -07:00
Borislav Petkov 18ff44b189 scripts/decodecode: make faulting insn ptr more robust
It can accidentally happen that the faulting insn (the exact instruction
bytes) is repeated a little further on in the trace.  This causes that
same instruction to be tagged twice, see example below.

What we want to do, however, is to track back from the end of the whole
disassembly so many lines as the slice which starts with the faulting
instruction is long.  This leads us to the actual faulting instruction
and *then* we tag it.

While we're at it, we can drop the sed "g" flag because we address only
this one line.

Also, if we point to an instruction which changes decoding depending on
the slice being objdumped, like a Jcc insn, for example, we do not even
tag it as a faulting instruction because the instruction decode changes
in the second slice but we use that second format as a regex on the
fsrst disassembled buffer and more often than not that instruction
doesn't match.

Again, simply tag the line which is deduced from the original "<>"
marking we've received from the kernel.

This also solves the pathologic issue of multiple tagging like this:

  29:*  0f 0b                   ud2         <-- trapping instruction
  2b:*  0f 0b                   ud2         <-- trapping instruction
  2d:*  0f 0b                   ud2         <-- trapping instruction

Double tagging example:

Code: 34 dd 40 30 ad 81 48 c7 c0 80 f6 00 00 48 8b 3c 30 48 01 c6 b8 ff ff ff ff 48 8d 57 f0 48 39 f7 74 2f 49 8b 4c 24 08 48 8b 47 f0 <48> 39 48 08 75 0e eb 2a 66 90 48 8b 40 f0 48 39 48 08 74 1e 48
All code
========
   0:   34 dd                   xor    $0xdd,%al
   2:   40 30 ad 81 48 c7 c0    xor    %bpl,-0x3f38b77f(%rbp)
   9:   80 f6 00                xor    $0x0,%dh
   c:   00 48 8b                add    %cl,-0x75(%rax)
   f:   3c 30                   cmp    $0x30,%al
  11:   48 01 c6                add    %rax,%rsi
  14:   b8 ff ff ff ff          mov    $0xffffffff,%eax
  19:   48 8d 57 f0             lea    -0x10(%rdi),%rdx
  1d:   48 39 f7                cmp    %rsi,%rdi
  20:   74 2f                   je     0x51
  22:   49 8b 4c 24 08          mov    0x8(%r12),%rcx
  27:   48 8b 47 f0             mov    -0x10(%rdi),%rax
  2b:*  48 39 48 08             cmp    %rcx,0x8(%rax)     <-- trapping instruction
  2f:   75 0e                   jne    0x3f
  31:   eb 2a                   jmp    0x5d
  33:   66 90                   xchg   %ax,%ax
  35:   48 8b 40 f0             mov    -0x10(%rax),%rax
  39:*  48 39 48 08             cmp    %rcx,0x8(%rax)     <-- trapping instruction
  3d:   74 1e                   je     0x5d
  3f:   48                      rex.W

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 15:54:27 -07:00
Steven Rostedt ced9cb1af1 localmodconfig: Process source kconfig files as they are found
A bug was reported that caused localmodconfig to not keep all the
dependencies of ATH9K. This was caused by the kconfig file:

In drivers/net/wireless/ath/Kconfig:

---
if ATH_CARDS

config ATH_DEBUG
        bool "Atheros wireless debugging"
        ---help---
          Say Y, if you want to debug atheros wireless drivers.
          Right now only ath9k makes use of this.

source "drivers/net/wireless/ath/ath5k/Kconfig"
source "drivers/net/wireless/ath/ath9k/Kconfig"
source "drivers/net/wireless/ath/carl9170/Kconfig"
source "drivers/net/wireless/ath/ath6kl/Kconfig"
source "drivers/net/wireless/ath/ar5523/Kconfig"
source "drivers/net/wireless/ath/wil6210/Kconfig"

endif
---

The current way kconfig works, it processes new source files after the
first file is completed. It creates an array of new source config files
and when the one file is finished, it continues with the next file.

Unfortunately, this means that it loses the fact that the source file is
within an "if" statement, and this means that each of these source file's
configs will not have the proper dependencies set.

As ATH9K requires ATH_CARDS set, the localmodconfig did not see that
dependency, and did not enable ATH_CARDS. When the oldconfig was run, it
forced ATH9K to be disabled.

Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1304291022320.9234@oneiric

Cc: stable@vger.kernel.org # 3.8+
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Tested-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-04-29 15:41:51 -04:00
Steven Rostedt bc20d12eca localmodconfig: Add debug prints for dependencies of module configs
When a config for a module is added to the list to save in the final
config file, add a print to show what dependencies are used. This is
useful to debug when a config is disabled by the make oldconfig after
localmodconfig is finished.

This print only appears if the environment variable LOCALMODCONFIG_DEBUG
is defined.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-04-29 15:17:40 -04:00
Linus Torvalds 4f567cbc95 Char / Misc driver update for 3.10-rc1
Here's the big char / misc driver update for 3.10-rc1
 
 A number of various driver updates, the majority being new functionality
 in the MEI driver subsystem (it's now a subsystem, it started out just a
 single driver), extcon updates, memory updates, hyper-v updates, and a
 bunch of other small stuff that doesn't fit in any other tree.
 
 All of these have been in linux-next for a while
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlF+mtYACgkQMUfUDdst+ymFXQCfdLsD4Cxz+jkgW+tljh9i70XD
 OFkAnRPMMhLS8/kddf02lLMYzYUFdy1U
 =zaFJ
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver update from Greg Kroah-Hartman:
 "Here's the big char / misc driver update for 3.10-rc1

  A number of various driver updates, the majority being new
  functionality in the MEI driver subsystem (it's now a subsystem, it
  started out just a single driver), extcon updates, memory updates,
  hyper-v updates, and a bunch of other small stuff that doesn't fit in
  any other tree.

  All of these have been in linux-next for a while"

* tag 'char-misc-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (148 commits)
  Tools: hv: Fix a checkpatch warning
  tools: hv: skip iso9660 mounts in hv_vss_daemon
  tools: hv: use FIFREEZE/FITHAW in hv_vss_daemon
  tools: hv: use getmntent in hv_vss_daemon
  Tools: hv: Fix a checkpatch warning
  tools: hv: fix checks for origin of netlink message in hv_vss_daemon
  Tools: hv: fix warnings in hv_vss_daemon
  misc: mark spear13xx-pcie-gadget as broken
  mei: fix krealloc() misuse in in mei_cl_irq_read_msg()
  mei: reduce flow control only for completed messages
  mei: reseting -> resetting
  mei: fix reading large reposnes
  mei: revamp mei_irq_read_client_message function
  mei: revamp mei_amthif_irq_read_message
  mei: revamp hbm state machine
  Revert "drivers/scsi: use module_pcmcia_driver() in pcmcia drivers"
  Revert "scsi: pcmcia: nsp_cs: remove module init/exit function prototypes"
  scsi: pcmcia: nsp_cs: remove module init/exit function prototypes
  mei: wd: fix line over 80 characters
  misc: tsl2550: Use dev_pm_ops
  ...
2013-04-29 11:18:34 -07:00
Yann E. MORIN 21ca352b71 kconfig: fix lists definition for C++
The C++ compiler is more strict in that it refuses to assign
a void* to a struct list_head*.

Fix that by explicitly casting the poisonning constants.

(Tested with all 5 frontends, now.)

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Benjamin Poirier <bpoirier@suse.de>
2013-04-29 19:55:56 +02:00
James Hogan a53a11f357 modpost: fix unwanted VMLINUX_SYMBOL_STR expansion
Commit a4b6a77b77 ("module: fix symbol
versioning with symbol prefixes") broke the MODVERSIONS loading of any
module using memcmp (e.g. ipv6) on x86_32, as it's defined to
__builtin_memcmp which is expanded by VMLINUX_SYMBOL_STR. Use
__VMLINUX_SYMBOL_STR instead which doesn't expand the argument.

Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: <stable@vger.kernel.org> # 3.9
2013-04-29 11:41:42 +09:30
Yann E. MORIN 23a5dfdad2 Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG"
This reverts commit 422c809f03.
It causes more harm than it solves issues.

Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Greg KH <greg@kroah.com>
2013-04-26 23:21:59 +02:00
Yann E. MORIN e43956e607 kconfig: implement KCONFIG_PROBABILITY for randconfig
Currently the odds to set each symbol is (rounded):
    booleans:   y: 50%          n: 50%
    tristates:  y: 33%  m: 33%  n: 33%

Introduce a KCONFIG_PROBABILITY environment variable to tweak the
probabilities (in percentage), as such:
    KCONFIG_PROBABILITY     y:n split           yⓂ️n split
    -----------------------------------------------------------------
[1] unset or empty          50  : 50            33  : 33  : 34
[2] N                        N  : 100-N         N/2 : N/2 : 100-N
    N:M                     N+M : 100-(N+M)      N  :  M  : 100-(N+M)
    N:M:L                    N  : 100-N          M  :  L  : 100-(M+L)

[1] The current behaviour is kept as default, for backward compatibility
[2] The solution initially implemented by Peter for Buildroot, see:
    http://git.buildroot.org/buildroot/commit/?id=3435c1afb5

Signed-off-by: Peter Korsgaard <jacmet@uclibc.org>
[yann.morin.1998@free.fr: add to Documentation/]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-25 00:16:30 +02:00
Yann E. MORIN 0d8024c6eb kconfig: allow specifying the seed for randconfig
For reproducibility, it can be useful to be able to specify the
seed to use to seed the RNG.

Add a new KCONFIG_SEED environment variable which can be set to
the seed to use:
    $ make KCONFIG_SEED=42 randconfig
    $ sha1sum .config
    70a128c8dcc61303069e1be352cce64114dfcbca  .config
    $ make KCONFIG_SEED=42 randconfig
    $ sha1sum .config
    70a128c8dcc61303069e1be352cce64114dfcbca  .config

It's very usefull for eg. debugging the kconfig parser.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-25 00:16:25 +02:00
Yann E. MORIN 422c809f03 kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG
Currently, randconfig does randomise choice entries, unless KCONFIG_ALLCONFIG
is specified.

For example, given those two files (Thomas' test-case):

    ---8<--- Config.test.in
    config OPTIONA
        bool "Option A"

    choice
        prompt "This is a choice"

    config CHOICE_OPTIONA
        bool "Choice Option A"

    config CHOICE_OPTIONB
        bool "Choice Option B"

    endchoice

    config OPTIONB
        bool "Option B"
    ---8<--- Config.test.in

    ---8<--- config.defaults
    CONFIG_OPTIONA=y
    ---8<--- config.defaults

And running:
    ./scripts/kconfig/conf --randconfig Config.test.in

does properly randomise the two choice symbols (and the two booleans).

However, running:
    KCONFIG_ALLCONFIG=config.defaults \
    ./scripts/kconfig/conf --randconfig Config.test.in

does *not* reandomise the two choice entries, and only CHOICE_OPTIONA
will ever be selected. (OPTIONA will always be set (expected), and
OPTIONB will be be properly randomised (expected).)

This patch defers setting that a choice has a value until a symbol for
that choice is indeed set, so that choices are properly randomised when
KCONFIG_ALLCONFIG is set, but not if a symbol for that choice is set.

Also, as a side-efect, this patch fixes the following case:

    ---8<---
    choice
    config OPTION_A
        bool "Option A"
    config OPTION_B
        bool "Option B"
    config OPTION_C
        bool "Option C"
    endchoice
    ---8<---

which could previously generate such .config files:

    ---8<---                            ---8<---
    CONFIG_OPTION_A=y                   CONFIG_OPTION_A=y
    CONFIG_OPTION_B=y                   # CONFIG_OPTION_B is not set
    # CONFIG_OPTION_C is not set        CONFIG_OPTION_C=y
    ---8<---                            ---8<---

Ie., the first entry in a choice is always set, plus zero or one of
the other options may be set.

This patch ensures that only one option may be set for a choice.

Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Arnaud Lacombe <lacombar@gmail.com>

---
Changes v2 -> v3
  - ensure only one symbol is set in a choice

Changes v1 -> v2:
  - further postpone setting that a choice has a value until
    one is indeed set
  - do not print symbols that are part of an invisible choice
2013-04-25 00:16:12 +02:00
Yann E. MORIN cfa98f2e0a kconfig: do not override symbols already set
For randconfig, if a list of required symbols is specified with
KCONFIG_ALLCONFIG, such symbols do not "have a value" as per
sym_has_value(), but have the "valid" flag set.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-25 00:15:58 +02:00
Yann E. MORIN 61fa0e17f9 kconfig: fix randconfig tristate detection
Because the modules' symbole (CONFIG_MODULES) may not yet be set when
we check a symbol's tristate capabilty, we'll always find that tristate
symbols are booleans, even if we randomly decided that to enable modules:
sym_get_type(sym) always return boolean for tristates when modules_sym
has not been previously set to 'y' *and* its value calculated *and* its
visibility calculated, both of which only occur after we randomly assign
values to symbols.

Fix that by looking at the raw type of symbols. Tristate set to 'm' will
be promoted to 'y' when their values will be later calculated.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-25 00:15:47 +02:00
Michal Marek a0f9c6f202 rpm-pkg: Remove pointless set -e statements
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-04-18 14:56:54 +02:00
Michal Marek 6501320311 rpm-pkg: Always regenerate the specfile
The *pkg targets are always run, so it makes no sense to cache the
generated specfile. This also fixes build errors when the specfile
becomes out of date, without the Makefile noticing it:

$ make rpm
  works
$ echo yadadada >localversion-test
$ make rpm
  fails, because kernel.spec assumes the old kernel release string

Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-04-18 14:56:54 +02:00
Michal Marek 403d3cc473 rpm-pkg: Do not write to the parent directory
Now that we only package explicitly listed files to the tarball, there
is no need to abuse the parent directory.

Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-04-18 14:56:53 +02:00
Michal Marek 6615d6c322 rpm-pkg: Do not package the whole source directory
The source tree can contain lots of uninteresting data like tag or
cscope files, packaging which slows down make rpm needlessly. It can
also break the build, if the tree contains an unrelated file named
*.spec. The downside of this change is that new subdirectories have to
be added to the KBUILD_ALLDIRS variable in the top-level Makefile. The
upside is that the behavior is more predictable.

Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-04-18 14:56:44 +02:00
Joe Perches e942e2c3f7 checkpatch: fix stringification macro defect
Fix checkpatch misreporting defect with stringification macros

ERROR: Macros with complex values should be enclosed in parenthesis
  #27: FILE: arch/arm/include/asm/kgdb.h:41:
  +#define ___to_string(X) #X

Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Vincent Stehlé <v-stehle@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-17 16:10:44 -07:00
Yann E. MORIN cdf0c2cfd7 kconfig/lxdialog: rationalise the include paths where to find {.n}curses{,w}.h
The current code does this:

    if [ -f /usr/include/ncursesw/curses.h ]; then
        echo '-I/usr/include/ncursesw -DCURSES_LOC="<ncursesw/curses.h>"'
    elif [ -f /usr/include/ncurses/ncurses.h ]; then
        echo '-I/usr/include/ncurses -DCURSES_LOC="<ncurses.h>"'
    elif [ -f /usr/include/ncurses/curses.h ]; then
        echo '-I/usr/include/ncurses -DCURSES_LOC="<ncurses/curses.h>"'
    [...]

This is merely inconsistent:
  - adding the full path to the directory in the -I directive,
  - especially since that path is already a sub-path of the system
    include path,
  - and then repeating the sub-path in the #include directive.

Rationalise each include directive:
  - only use the filename in the #include directive,
  - keep the -I directives: they are always searched for before the
    system include path; this ensures the correct header is used.

Using the -I directives and the filename-only in #include is more in
line with how pkg-config behaves, eg.:
    $ pkg-config --cflags ncursesw
    -I/usr/include/ncursesw

This paves the way for using pkg-config for CFLAGS, too, now we use it
to find the libraries.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-16 22:00:32 +02:00