Commit Graph

1406 Commits

Author SHA1 Message Date
Greg Kroah-Hartman 0fe763c570 Drivers: misc: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:16 -08:00
Linus Torvalds d8c532c407 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:

 - Missing MAINTAINERS entries were added for several drivers

 - Adds V4L2 support for DMABUF handling, allowing zero-copy buffer
   sharing between V4L2 devices and GPU

 - Got rid of all warnings when compiling with W=1 on x86

 - Add a new driver for Exynos hardware (s3c-camif)

 - Several bug fixes, cleanups and driver improvements

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (243 commits)
  [media] omap3isp: Replace cpu_is_omap3630() with ISP revision check
  [media] omap3isp: Prepare/unprepare clocks before/after enable/disable
  [media] omap3isp: preview: Add support for 8-bit formats at the sink pad
  [media] omap3isp: Replace printk with dev_*
  [media] omap3isp: Find source pad from external entity
  [media] omap3isp: Configure CSI-2 phy based on platform data
  [media] omap3isp: Add PHY routing configuration
  [media] omap3isp: Add CSI configuration registers from control block to ISP resources
  [media] omap3isp: Remove unneeded module memory address definitions
  [media] omap3isp: Use monotonic timestamps for statistics buffers
  [media] uvcvideo: Fix control value clamping for unsigned integer controls
  [media] uvcvideo: Mark first output terminal as default video node
  [media] uvcvideo: Add VIDIOC_[GS]_PRIORITY support
  [media] uvcvideo: Return -ENOTTY for unsupported ioctls
  [media] uvcvideo: Set device_caps in VIDIOC_QUERYCAP
  [media] uvcvideo: Don't fail when an unsupported format is requested
  [media] uvcvideo: Return -EACCES when trying to access a read/write-only control
  [media] uvcvideo: Set error_idx properly for extended controls API failures
  [media] rtl28xxu: add NOXON DAB/DAB+ USB dongle rev 2
  [media] fc2580: write some registers conditionally
  ...
2012-12-13 19:22:22 -08:00
Jiri Kosina 818b930bc1 Merge branches 'for-3.7/upstream-fixes', 'for-3.8/hidraw', 'for-3.8/i2c-hid', 'for-3.8/multitouch', 'for-3.8/roccat', 'for-3.8/sensors' and 'for-3.8/upstream' into for-linus
Conflicts:
	drivers/hid/hid-core.c
2012-12-12 21:41:55 +01:00
Benjamin Tissoires 7a7d6d9c5f HID: i2c-hid: add mutex protecting open/close race
We should not enter close function while someone else is in open.
This mutex prevents this race.

There is also no need to override the ret value with -EIO in case of
a failure of i2c_hid_set_power.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-12 18:26:22 +01:00
Alexander Holler 68fd32b822 Revert "HID: sensors: add to special driver list"
Those IDs aren't necessary anymore.

This reverts commit c8147d9ea1.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Acked-by: "Pandruvada, Srinivas" <srinivas.pandruvada@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-12 16:49:10 +01:00
Alexander Holler 83499b52c6 HID: sensors: autodetect USB HID sensor hubs
It should not be necessary to add IDs for HID sensor hubs to lists in
hid-core.c and hid-sensor-hub.c. So instead of a whitelist, autodetect such USB
HID sensor hubs, based on a collection of type physical inside a useage page of
type sensor. If some sensor hubs stil must be usable as raw devices, a
blacklist might be created.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Acked-by: "Pandruvada, Srinivas" <srinivas.pandruvada@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-12 16:49:10 +01:00
Lamarque V. Souza 4529eefad0 HID: hidp: fallback to input session properly if hid is blacklisted
This patch against kernel 3.7.0-rc8 fixes a kernel oops when turning on the
bluetooth mouse with id 0458:0058 [1].

The mouse in question supports both input and hid sessions, however it is
blacklisted in drivers/hid/hid-core.c so the input session is one that should
be used. Long ago (around kernel 3.0.0) some changes in the bluetooth
subsystem made the kernel do not fallback to input session when hid session is
not supported or blacklisted. This patch restore that behaviour by making the
kernel try the input session if hid_add_device returns ENODEV.

The patch exports hid_ignore() from hid-core.c so that it can be used in the
bluetooth subsystem.

[1] https://bugzilla.kernel.org/show_bug.cgi?id=39882

Signed-off-by: Lamarque V. Souza <lamarque@gmail.com>
Acked-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-07 11:12:27 +01:00
Jiri Kosina 9afd09a1db HID: i2c-hid: fix ret_count check
ret_count has to be at least 3, as we have to count the 2 bytes that are used
for the size of the reply. Without this, memcpy() might be called with zero or
negative count.

Reported-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-06 10:59:28 +01:00
Benjamin Tissoires e5b50fe7be HID: i2c-hid: fix i2c_hid_get_raw_report count mismatches
The previous memcpy implementation relied on the size advertized by the
device. There were no guarantees that buf was big enough.

Some gymnastic is also required with the +2/-2 to take into account
the first 2 bytes of the returned buffer where the total returned
length is supplied by the device.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-06 10:58:42 +01:00
Benjamin Tissoires 8a1bbb5319 HID: i2c-hid: remove extra .irq field in struct i2c_hid
There is no point in keeping the irq in i2c_hid as it's already
there in client.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-06 10:56:37 +01:00
Benjamin Tissoires 29b45787d1 HID: i2c-hid: reorder allocation/free of buffers
Simplifies i2c_hid_alloc_buffers tests, and makes this function
responsible of the assignment of ihid->bufsize.
The condition for the reallocation in i2c_hid_start is then simpler.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-06 10:55:15 +01:00
Benjamin Tissoires 27174cff8f HID: i2c-hid: fix memory corruption due to missing hid declaration
HID descriptors contains 4 bytes of reserved field.
The previous implementation was overriding the next fields in struct i2c_hid.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-06 10:54:26 +01:00
Jiri Kosina addb114dd6 HID: i2c-hid: remove superfluous include
The pointless WARN_ON() has been removed from i2c_hid_remove(),
so we don't need bug.h any more.

Reported-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-05 11:29:08 +01:00
Benjamin Tissoires 6233362852 HID: i2c-hid: remove unneeded test in i2c_hid_remove
ihid can not be null, so there are no reasons to test it.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-05 11:28:48 +01:00
Benjamin Tissoires c737bcf92e HID: i2c-hid: i2c_hid_get_report may fail
If i2c_hid_get_report fails, exit i2c_hid_init_report.
The printk log is already called by i2c_hid_get_report, so no need
to add some more printks.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-05 11:27:54 +01:00
Benjamin Tissoires 134ebfd86b HID: i2c-hid: also call i2c_hid_free_buffers in i2c_hid_remove
In the case where the hid driver in charge of handling the hid part
of the device (hid-generic for instance) fails at probe, neither
i2c_hid_start nor i2c_hid_stop are called.
Thus, the buffers allocated in i2c_hid_probe are never freed.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-05 11:26:36 +01:00
Benjamin Tissoires 9972dcc29c HID: i2c-hid: fix error messages
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-05 11:07:14 +01:00
Benjamin Tissoires 317b204a13 HID: i2c-hid: fix return paths
Forwards appropriate return values.
As noone use the error returned by i2c_hid_get_input, let's make it
returning void.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-05 11:04:28 +01:00
Benjamin Tissoires 6bf6c8bf2b HID: i2c-hid: remove unused static declarations
These definitions are not used here, but are defined by the specification.
Keeping some of them for documentation purposes.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-05 11:02:31 +01:00
Benjamin Tissoires fa738644e5 HID: i2c-hid: fix i2c_hid_dbg macro
This avoids the problematic case:

if (condition)
	i2c_hid_dbg(ihid, "Blah blah %d\n", i);
else
	do_something_very_important();

Which looks correct, however with the previous macro definition,
this expands to the unexpected:

if (condition) {
	if (debug)	\
		dev_printk(KERN_DEBUG, &ihid->client->dev,
				"Blah blah %d\n", i);
	else
		do_something_very_important();
}

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-05 10:56:45 +01:00
Benjamin Tissoires ee8e880634 HID: i2c-hid: fix checkpatch.pl warning
We should not initialize to 0 static declarations.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-05 10:55:34 +01:00
Benjamin Tissoires 8ee0c05aa0 HID: i2c-hid: enhance Kconfig
The "comment" part can never be displayed, so we can remove it.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-05 10:55:03 +01:00
Benjamin Tissoires 24ebb37e65 HID: i2c-hid: change I2C name
no I2C driver has "i2c" in its name. It makes more sense to call this
i2c driver "hid".

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-05 10:52:16 +01:00
Ben Hutchings f9af7b9edc HID: Add Apple wireless keyboard 2011 ANSI to special driver list
Commit 0a97e1e9f9 ('HID: apple: Add Apple wireless keyboard 2011 ANSI PID')
did not update the special driver list in hid-core.c, so hid-generic may
still bind to this device.

Reported-by: Ari Pollak <ari@scvngr.com>
References: http://bugs.debian.org/694546
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-02 21:08:43 +01:00
Benjamin Tissoires ae751fa82d HID: hid-input: factorize hid_input allocation
This just refactors the allocation of hid_input.
No semantic changes.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-29 14:59:40 +01:00
Andrew Duggan b5531318f1 HID: hidraw: fix signaling SIGIO when hidraw reports an event
This patch fixes sending SIGIO from hidraw_report_event by creating a fasync
handler which adds the fasync entry.

Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-28 16:36:18 +01:00
Mauro Carvalho Chehab d033a308d8 Merge remote-tracking branch 'linus/master' into staging/for_v3.8
* linus/master: (1428 commits)
  futex: avoid wake_futex() for a PI futex_q
  watchdog: using u64 in get_sample_period()
  writeback: put unused inodes to LRU after writeback completion
  mm: vmscan: check for fatal signals iff the process was throttled
  Revert "mm: remove __GFP_NO_KSWAPD"
  proc: check vma->vm_file before dereferencing
  UAPI: strip the _UAPI prefix from header guards during header installation
  include/linux/bug.h: fix sparse warning related to BUILD_BUG_ON_INVALID
  Linux 3.7-rc7
  powerpc/eeh: Do not invalidate PE properly
  ALSA: hda - Fix build without CONFIG_PM
  of/address: sparc: Declare of_iomap as an extern function for sparc again
  PM / QoS: fix wrong error-checking condition
  bnx2x: remove redundant warning log
  vxlan: fix command usage in its doc
  8139cp: revert "set ring address before enabling receiver"
  MPI: Fix compilation on MIPS with GCC 4.4 and newer
  MIPS: Fix crash that occurs when function tracing is enabled
  MIPS: Merge overlapping bootmem ranges
  jbd: Fix lock ordering bug in journal_unmap_buffer()
  ...
2012-11-28 07:22:38 -02:00
Jiri Kosina 13f1962402 HID: hiddev: fix nonblocking read semantics wrt EIO/ERESTARTSYS
When the file has been open in non-blocking mode, EIO or ERESTARTSYS
would never be returned even if they should (for example when device
has been unplugged, you want EIO and not EAGAIN to be returned).

Move the O_NONBLOCK check after other checks have been performed.

Base on similar patch done to hidraw by
Founder Fang <founder.fang@gmail.com>

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-28 00:10:44 +01:00
Ortwin Glück 4cc8541782 HID: add battery quirk for Apple 2009_ISO keyboard
Support battery capacity on another Apple wireless keyboard.

Signed-off-by: Ortwin Glück <odi@odi.ch>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-26 14:25:24 +01:00
Marek Vasut 436136cec6 HID: add quirk for Freescale i.MX23 ROM recovery
The USB recovery mode present in i.MX23 ROM emulates USB HID.  It needs this
quirk to behave properly.

Even if the official branding of the chip is Freescale i.MX23, I named it
Sigmatel STMP3780 since that's what the chip really is and it even reports
itself as STMP3780.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-26 14:20:35 +01:00
Founder Fang 7611e8d26d HID: hidraw: fix nonblock read return EAGAIN after device removed
When nonblock read the condition check (file->f_flags & O_NONBLOCK) always be
true, signal_pending and device exist checking never get a chance to run, so
the user mode code always get EAGAIN even if device removed. move nonblock mode
checking to the last can fix this problem.

Signed-off-by: Founder Fang <founder.fang@gmail.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-26 14:18:15 +01:00
Marco Biscaro b8a8f515d2 HID: add support to novatec wireless mouse
This patch adds support to Novatec wireless mouse (device ID 0603:1602).
Fixes bug https://bugzilla.kernel.org/show_bug.cgi?id=47031

Signed-off-by: Marco Biscaro <marcobiscaro2112@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-22 23:44:26 +01:00
Jiri Kosina 3c62602434 HID: i2c-hid: fix memory leak during probe
In case we are returning from i2c_hid_probe() through the 'err' or
'err_mem_free' labels, there is noone freeing the buffers allocated by
i2c_hid_alloc_buffers().

Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-20 17:37:45 +01:00
Alan Cox e3bbe8755c HID: sensor-hub: Remove pointless NULL check
report cannot be NULL, fortunately as we use it before we check !

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-20 17:35:57 +01:00
Benjamin Tissoires 4a200c3b9a HID: i2c-hid: introduce HID over i2c specification implementation
Microsoft published the protocol specification of HID over i2c:
http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx

This patch introduces an implementation of this protocol.

This implementation does not includes the ACPI part of the specification.
This will come when ACPI 5.0 devices enumeration will be available.

Once the ACPI part is done, OEM will not have to declare HID over I2C
devices in their platform specific driver.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-19 11:04:38 +01:00
Stefan Achatz 955dca354c HID: roccat: fix wrong attr size for koneplus tcu
More thorough testing revealed a typo in last koneplus cleanups.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-18 22:58:28 +01:00
Linus Torvalds 1a1e8c6fad Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fix from Jiri Kosina:
 "This has a build fix for architectures where memcmp() is macro, from
  Jiri Slaby"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: microsoft: do not use compound literal - fix build
2012-11-16 07:58:20 -08:00
Tushar Behera d339f61d14 HID: hiddev: Remove redundant check on unsigned variable
No need to check whether unsigned variable is less than 0.

CC: Jiri Kosina <jkosina@suse.cz>
CC: linux-usb@vger.kernel.org
CC: linux-input@vger.kernel.org
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-16 10:26:23 +01:00
Benjamin Tissoires 88c687b3e6 HID: usbhid: add quirk HID_QUIRK_NOGET to TPV optical touchscreen
Without this, the device is blocked in dmesg at:
hid-multitouch 0003:25AA:8883.000X: usb_submit_urb(ctrl) failed: -1
hid-multitouch 0003:25AA:8883.000X: timeout initializing reports

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-15 10:34:57 +01:00
Benjamin Tissoires 1b42fc4a28 HID: multitouch: fix Win 8 protocol
The Win 8 protocol specify the fact that each valid touch must be reported
within a frame until it is released.
We can therefore use the always_valid quirk and dismiss reports when we see
duplicate contacts ID.

We recognize Win8 certified devices from their vendor feature 0xff0000c5
where Microsoft put a signed blob in the report to check if the device
passed the certification.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-15 10:19:00 +01:00
Benjamin Tissoires 9b3bb9b8b6 HID: multitouch: support for hovering devices
Win8 devices supporting hovering must provides InRange HID field.
The information that the finger is here but is not touching the surface
is sent to the user space through ABS_MT_DISTANCE as required by the
multitouch protocol.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-15 10:17:52 +01:00
Benjamin Tissoires 2872839904 HID: multitouch: add MT_QUIRK_IGNORE_DUPLICATES
This quirk allows a device to reuse a contact id when sending garbage
inactive contacts at the end of a report.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-15 10:17:21 +01:00
Benjamin Tissoires 20b60e6dee HID: multitouch: move ALWAYS_VALID quirk check
Win 8 device specification changed the requirements for the hid usages
of the multitouch devices. Now InRange is optional and must be only
used when the device supports hovering.

This ensures that the quirk ALWAYS_VALID is taken into account and
also ensures its precedence over the other VALID* quirks.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-15 10:09:48 +01:00
Benjamin Tissoires 349fd6705b HID: multitouch: support T and C for win8 devices
Win8 input specification clarifies the X and Y sent by devices.
It distincts the position where the user wants to Touch (T) from
the center of the ellipsoide (C). This patch enable supports for this
distinction in hid-multitouch.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-15 10:09:12 +01:00
Benjamin Tissoires afbcb04c18 HID: multitouch: get maxcontacts also from logical_max value
Win8 devices are required to present the feature "Maximum Contact Number".
Fortunately all win7 devices I've seen presents this feature.
If the current value is 0, then, the driver can get the actual supported
contact count by refering to the logical_max.
This win8 specification ensures that logical_max may not be above 250.
This also allows us to detect when devices like irtouch or stantum reports
an obviously wrong value of 255.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-15 10:08:56 +01:00
Benjamin Tissoires 54f4c0c3e9 HID: multitouch: support arrays for the split of the touches in a report
Win8 certification introduced the ability to transmit two X and two Y per
touch. The specification precises that it must be used in an array.

This test guarantees that we split the touches on the last element
in this array.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-15 10:08:40 +01:00
Benjamin Tissoires f262d1fa2c HID: add usage_index in struct hid_usage.
Currently, there is no way to know the index of the current field
in the .input_mapping and .event callbacks  when this field is inside
an array of HID fields.
This patch adds this index to the struct hid_usage so that this
information is available to input_mapping and event callbacks.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-15 10:08:14 +01:00
Benjamin Tissoires 7746383868 HID: fix unit exponent parsing
HID spec details special values for the HID field unit exponent.
Basically, the range [0x8..0xf] correspond to [-8..-1], so this is
a standard two's complement on a half-byte.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-15 10:07:55 +01:00
Benjamin Tissoires ccdd699411 HID: round return value of hidinput_calc_abs_res
hidinput_calc_abs_res should return the closest int in the division
instead of the floor.
On a device with a logical_max of 3008 and a physical_max of 255mm,
previous implementation gave a resolution of 11 instead of 12.
With 11, user-space computes a physical size of 273.5mm and the
round_closest results gives 250.6mm.
The old implementation introduced an error of 2cm in this example.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-15 10:06:56 +01:00
Benjamin Tissoires 37cf6e6fc3 HID: export hidinput_calc_abs_res
Exporting the function allows us to calculate the resolution in third
party drivers like hid-multitouch.
This patch also complete the function with additional valid axes.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-15 10:06:28 +01:00