Commit Graph

544 Commits

Author SHA1 Message Date
Jens Axboe 1eff9d322a block: rename bio bi_rw to bi_opf
Since commit 63a4cc2486, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.

No intended functional changes in this commit.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07 14:41:02 -06:00
Tahsin Erdogan 72ef799b3f block: do not merge requests without consulting with io scheduler
Before merging a bio into an existing request, io scheduler is called to
get its approval first. However, the requests that come from a plug
flush may get merged by block layer without consulting with io
scheduler.

In case of CFQ, this can cause fairness problems. For instance, if a
request gets merged into a low weight cgroup's request, high weight cgroup
now will depend on low weight cgroup to get scheduled. If high weigt cgroup
needs that io request to complete before submitting more requests, then it
will also lose its timeslice.

Following script demonstrates the problem. Group g1 has a low weight, g2
and g3 have equal high weights but g2's requests are adjacent to g1's
requests so they are subject to merging. Due to these merges, g2 gets
poor disk time allocation.

cat > cfq-merge-repro.sh << "EOF"
#!/bin/bash
set -e

IO_ROOT=/mnt-cgroup/io

mkdir -p $IO_ROOT

if ! mount | grep -qw $IO_ROOT; then
  mount -t cgroup none -oblkio $IO_ROOT
fi

cd $IO_ROOT

for i in g1 g2 g3; do
  if [ -d $i ]; then
    rmdir $i
  fi
done

mkdir g1 && echo 10 > g1/blkio.weight
mkdir g2 && echo 495 > g2/blkio.weight
mkdir g3 && echo 495 > g3/blkio.weight

RUNTIME=10

(echo $BASHPID > g1/cgroup.procs &&
 fio --readonly --name name1 --filename /dev/sdb \
     --rw read --size 64k --bs 64k --time_based \
     --runtime=$RUNTIME --offset=0k &> /dev/null)&

(echo $BASHPID > g2/cgroup.procs &&
 fio --readonly --name name1 --filename /dev/sdb \
     --rw read --size 64k --bs 64k --time_based \
     --runtime=$RUNTIME --offset=64k &> /dev/null)&

(echo $BASHPID > g3/cgroup.procs &&
 fio --readonly --name name1 --filename /dev/sdb \
     --rw read --size 64k --bs 64k --time_based \
     --runtime=$RUNTIME --offset=256k &> /dev/null)&

sleep $((RUNTIME+1))

for i in g1 g2 g3; do
  echo ---- $i ----
  cat $i/blkio.time
done

EOF
# ./cfq-merge-repro.sh
---- g1 ----
8:16 162
---- g2 ----
8:16 165
---- g3 ----
8:16 686

After applying the patch:

# ./cfq-merge-repro.sh
---- g1 ----
8:16 90
---- g2 ----
8:16 445
---- g3 ----
8:16 471

Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20 21:35:12 -06:00
Jan Kara 0b31c10c66 cfq-iosched: Charge at least 1 jiffie instead of 1 ns
Commit 9a7f38c42c (cfq-iosched: Convert from jiffies to nanoseconds)
could result in charging just 1 ns to a cgroup submitting IO instead of 1
jiffie we always charged before. It is arguable what is the right amount
to change but for now lets retain the old behavior of always charging at
least one jiffie.

Fixes: 9a7f38c42c
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-28 08:21:50 -06:00
Jan Kara 149321a611 cfq-iosched: Fix regression in bonnie++ rewrite performance
Commit 9a7f38c42c (cfq-iosched: Convert from jiffies to nanoseconds)
broke the condition for detecting starved sync IO in
cfq_completed_request() because rq->start_time remained in jiffies but
we compared it with nanosecond values. This manifested as a regression
in bonnie++ rewrite performance because we always ended up considering
sync IO starved and thus never increased async IO queue depth.

Since rq->start_time is used in a lot of places, converting it to ns
values would be non-trivial. So just revert the condition in CFQ to use
comparison with jiffies. This will lead to suboptimal results if
cfq_fifo_expire[1] will ever come close to 1 jiffie but so far we are
relatively far from that with the storage used with CFQ (the default
value is 128 ms).

Fixes: 9a7f38c42c
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-28 08:21:48 -06:00
Jan Kara 93fdf1478a cfq-iosched: Convert slice_resid from u64 to s64
slice_resid can be both positive and negative. Commit 9a7f38c42c
(cfq-iosched: Convert from jiffies to nanoseconds) converted it from
long to u64. Although this did not introduce any functional regression
(the operations just overflow and the result was fine), it is certainly
wrong and could cause issues in future. So convert the type to more
appropriate s64.

Fixes: 9a7f38c42c
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-28 08:21:46 -06:00
Jens Axboe b8269db456 cfq-iosched: temporarily boost queue priority for idle classes
If we're queuing REQ_PRIO IO and the task is running at an idle IO
class, then temporarily boost the priority. This prevents livelocks
due to priority inversion, when a low priority task is holding file
system resources while attempting to do IO.

An example of that is shown below. An ioniced idle task is holding
the directory mutex, while a normal priority task is trying to do
a directory lookup.

[478381.198925] ------------[ cut here ]------------
[478381.200315] INFO: task ionice:1168369 blocked for more than 120 seconds.
[478381.201324]       Not tainted 4.0.9-38_fbk5_hotfix1_2936_g85409c6 #1
[478381.202278] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[478381.203462] ionice          D ffff8803692736a8     0 1168369      1 0x00000080
[478381.203466]  ffff8803692736a8 ffff880399c21300 ffff880276adcc00 ffff880369273698
[478381.204589]  ffff880369273fd8 0000000000000000 7fffffffffffffff 0000000000000002
[478381.205752]  ffffffff8177d5e0 ffff8803692736c8 ffffffff8177cea7 0000000000000000
[478381.206874] Call Trace:
[478381.207253]  [<ffffffff8177d5e0>] ? bit_wait_io_timeout+0x80/0x80
[478381.208175]  [<ffffffff8177cea7>] schedule+0x37/0x90
[478381.208932]  [<ffffffff8177f5fc>] schedule_timeout+0x1dc/0x250
[478381.209805]  [<ffffffff81421c17>] ? __blk_run_queue+0x37/0x50
[478381.210706]  [<ffffffff810ca1c5>] ? ktime_get+0x45/0xb0
[478381.211489]  [<ffffffff8177c407>] io_schedule_timeout+0xa7/0x110
[478381.212402]  [<ffffffff810a8c2b>] ? prepare_to_wait+0x5b/0x90
[478381.213280]  [<ffffffff8177d616>] bit_wait_io+0x36/0x50
[478381.214063]  [<ffffffff8177d325>] __wait_on_bit+0x65/0x90
[478381.214961]  [<ffffffff8177d5e0>] ? bit_wait_io_timeout+0x80/0x80
[478381.215872]  [<ffffffff8177d47c>] out_of_line_wait_on_bit+0x7c/0x90
[478381.216806]  [<ffffffff810a89f0>] ? wake_atomic_t_function+0x40/0x40
[478381.217773]  [<ffffffff811f03aa>] __wait_on_buffer+0x2a/0x30
[478381.218641]  [<ffffffff8123c557>] ext4_bread+0x57/0x70
[478381.219425]  [<ffffffff8124498c>] __ext4_read_dirblock+0x3c/0x380
[478381.220467]  [<ffffffff8124665d>] ext4_dx_find_entry+0x7d/0x170
[478381.221357]  [<ffffffff8114c49e>] ? find_get_entry+0x1e/0xa0
[478381.222208]  [<ffffffff81246bd4>] ext4_find_entry+0x484/0x510
[478381.223090]  [<ffffffff812471a2>] ext4_lookup+0x52/0x160
[478381.223882]  [<ffffffff811c401d>] lookup_real+0x1d/0x60
[478381.224675]  [<ffffffff811c4698>] __lookup_hash+0x38/0x50
[478381.225697]  [<ffffffff817745bd>] lookup_slow+0x45/0xab
[478381.226941]  [<ffffffff811c690e>] link_path_walk+0x7ae/0x820
[478381.227880]  [<ffffffff811c6a42>] path_init+0xc2/0x430
[478381.228677]  [<ffffffff813e6e26>] ? security_file_alloc+0x16/0x20
[478381.229776]  [<ffffffff811c8c57>] path_openat+0x77/0x620
[478381.230767]  [<ffffffff81185c6e>] ? page_add_file_rmap+0x2e/0x70
[478381.232019]  [<ffffffff811cb253>] do_filp_open+0x43/0xa0
[478381.233016]  [<ffffffff8108c4a9>] ? creds_are_invalid+0x29/0x70
[478381.234072]  [<ffffffff811c0cb0>] do_open_execat+0x70/0x170
[478381.235039]  [<ffffffff811c1bf8>] do_execveat_common.isra.36+0x1b8/0x6e0
[478381.236051]  [<ffffffff811c214c>] do_execve+0x2c/0x30
[478381.236809]  [<ffffffff811ca392>] ? getname+0x12/0x20
[478381.237564]  [<ffffffff811c23be>] SyS_execve+0x2e/0x40
[478381.238338]  [<ffffffff81780a1d>] stub_execve+0x6d/0xa0
[478381.239126] ------------[ cut here ]------------
[478381.239915] ------------[ cut here ]------------
[478381.240606] INFO: task python2.7:1168375 blocked for more than 120 seconds.
[478381.242673]       Not tainted 4.0.9-38_fbk5_hotfix1_2936_g85409c6 #1
[478381.243653] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[478381.244902] python2.7       D ffff88005cf8fb98     0 1168375 1168248 0x00000080
[478381.244904]  ffff88005cf8fb98 ffff88016c1f0980 ffffffff81c134c0 ffff88016c1f11a0
[478381.246023]  ffff88005cf8ffd8 ffff880466cd0cbc ffff88016c1f0980 00000000ffffffff
[478381.247138]  ffff880466cd0cc0 ffff88005cf8fbb8 ffffffff8177cea7 ffff88005cf8fcc8
[478381.248252] Call Trace:
[478381.248630]  [<ffffffff8177cea7>] schedule+0x37/0x90
[478381.249382]  [<ffffffff8177d08e>] schedule_preempt_disabled+0xe/0x10
[478381.250465]  [<ffffffff8177e892>] __mutex_lock_slowpath+0x92/0x100
[478381.251409]  [<ffffffff8177e91b>] mutex_lock+0x1b/0x2f
[478381.252199]  [<ffffffff817745ae>] lookup_slow+0x36/0xab
[478381.253023]  [<ffffffff811c690e>] link_path_walk+0x7ae/0x820
[478381.253877]  [<ffffffff811aeb41>] ? try_charge+0xc1/0x700
[478381.254690]  [<ffffffff811c6a42>] path_init+0xc2/0x430
[478381.255525]  [<ffffffff813e6e26>] ? security_file_alloc+0x16/0x20
[478381.256450]  [<ffffffff811c8c57>] path_openat+0x77/0x620
[478381.257256]  [<ffffffff8115b2fb>] ? lru_cache_add_active_or_unevictable+0x2b/0xa0
[478381.258390]  [<ffffffff8117b623>] ? handle_mm_fault+0x13f3/0x1720
[478381.259309]  [<ffffffff811cb253>] do_filp_open+0x43/0xa0
[478381.260139]  [<ffffffff811d7ae2>] ? __alloc_fd+0x42/0x120
[478381.260962]  [<ffffffff811b95ac>] do_sys_open+0x13c/0x230
[478381.261779]  [<ffffffff81011393>] ? syscall_trace_enter_phase1+0x113/0x170
[478381.262851]  [<ffffffff811b96c2>] SyS_open+0x22/0x30
[478381.263598]  [<ffffffff81780532>] system_call_fastpath+0x12/0x17
[478381.264551] ------------[ cut here ]------------
[478381.265377] ------------[ cut here ]------------

Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
2016-06-09 16:15:01 -06:00
Jan Kara 9114832581 cfq-iosched: Convert to use highres timers
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-08 08:56:06 -06:00
Jeff Moyer d2d481d04f cfq-iosched: Expose microsecond interfaces
Expose interfaces to tune time slices of CFQ IO scheduler in
microseconds.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-08 08:56:03 -06:00
Jeff Moyer 9a7f38c42c cfq-iosched: Convert from jiffies to nanoseconds
Convert all time-keeping in CFQ IO scheduler from jiffies to nanoseconds
so that we can later make the intervals more fine-grained than jiffies.
One jiffie is several miliseconds and even for today's rotating disks
that is a noticeable amount of time and thus we leave disk unnecessarily
idle.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-08 08:55:34 -06:00
Mike Christie d9d8c5c489 block: convert is_sync helpers to use REQ_OPs.
This patch converts the is_sync helpers to use separate variables
for the operation and flags.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
Mike Christie 63a4cc2486 blkg_rwstat: separate op from flags
The bio and request operation and flags are going to be separate
definitions, so we cannot pass them in as a bitmap. This patch
converts the blkg_rwstat code and its caller, cfq, to pass in the
values separately.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
Mike Christie ba568ea0a2 block: prepare elevator to use REQ_OPs.
This patch converts the elevator code to use separate variables
for the operation and flags, and to check req_op for the REQ_OP.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
Kirill A. Shutemov 09cbfeaf1a mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04 10:41:08 -07:00
Jan Kara 3984aa5520 cfq-iosched: Allow parent cgroup to preempt its child
Currently we don't allow sync workload of one cgroup to preempt sync
workload of any other cgroup. This is because we want to achieve service
separation between cgroups. However in cases where cgroup preempting is
ancestor of the current cgroup, there is no need of separation and
idling introduces unnecessary overhead. This hurts for example the case
when workload is isolated within a cgroup but journalling threads are in
root cgroup. Simple way to demostrate the issue is using:

dbench4 -c /usr/share/dbench4/client.txt -t 10 -D /mnt 1

on ext4 filesystem on plain SATA drive (mounted with barrier=0 to make
difference more visible). When all processes are in the root cgroup,
reported throughput is 153.132 MB/sec. When dbench process gets its own
blkio cgroup, reported throughput drops to 26.1006 MB/sec.

Fix the problem by making check in cfq_should_preempt() more benevolent
and allow preemption by ancestor cgroup. This improves the throughput
reported by dbench4 to 48.9106 MB/sec.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-04 09:50:43 -07:00
Jan Kara a257ae3e48 cfq-iosched: Allow sync noidle workloads to preempt each other
The original idea with preemption of sync noidle queues (introduced in
commit 718eee0579 "cfq-iosched: fairness for sync no-idle queues") was
that we service all sync noidle queues together, we don't idle on any of
the queues individually and we idle only if there is no sync noidle
queue to be served. This intention also matches the original test:

	if (cfqd->serving_type == SYNC_NOIDLE_WORKLOAD
	   && new_cfqq->service_tree == cfqq->service_tree)
		return true;

However since at that time cfqq->service_tree was not set for idling
queues, this test was unreliable and was replaced in commit e4a229196a
"cfq-iosched: fix no-idle preemption logic" by:

	if (cfqd->serving_type == SYNC_NOIDLE_WORKLOAD &&
	    cfqq_type(new_cfqq) == SYNC_NOIDLE_WORKLOAD &&
	    new_cfqq->service_tree->count == 1)
		return true;

That was a reliable test but was actually doing something different -
now we preempt sync noidle queue only if the new queue is the only one
busy in the service tree.

These days cfq queue is kept in service tree even if it is idling and
thus the original check would be safe again. But since we actually check
that cfq queues are in the same cgroup, of the same priority class and
workload type (sync noidle), we know that new_cfqq is fine to preempt
cfqq. So just remove the service tree check.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-04 09:50:14 -07:00
Jan Kara 6c80731c75 cfq-iosched: Reorder checks in cfq_should_preempt()
Move check for preemption by rt class up. There is no functional change
but it makes arguing about conditions simpler since we can be sure both
cfq queues are from the same ioprio class.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-04 09:50:12 -07:00
Jan Kara e795421e40 cfq-iosched: Don't group_idle if cfqq has big thinktime
There is no point in idling on a cfq group if the only cfq queue that is
there has too big thinktime.

Signed-off-by: Jan Kara <jack@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-04 09:50:11 -07:00
Tejun Heo 9e10a130d9 cgroup: replace cgroup_on_dfl() tests in controllers with cgroup_subsys_on_dfl()
cgroup_on_dfl() tests whether the cgroup's root is the default
hierarchy; however, an individual controller is only interested in
whether the controller is attached to the default hierarchy and never
tests a cgroup which doesn't belong to the hierarchy that the
controller is attached to.

This patch replaces cgroup_on_dfl() tests in controllers with faster
static_key based cgroup_subsys_on_dfl().  This leaves cgroup core as
the only user of cgroup_on_dfl() and the function is moved from the
header file to cgroup.c.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
2015-09-18 11:56:28 -04:00
Tejun Heo 69d7fde590 blkcg: use CGROUP_WEIGHT_* scale for io.weight on the unified hierarchy
cgroup is trying to make interface consistent across different
controllers.  For weight based resource control, the knob should have
the range [1, 10000] and default to 100.  This patch updates
cfq-iosched so that the weight range conforms.  The internal
calculations have enough range and the widening of the weight range
shouldn't cause any problem.

* blkcg_policy->cpd_bind_fn() is added.  If present, this is invoked
  when blkcg is attached to a hierarchy.

* cfq_cpd_init() is updated to use the new default value on the
  unified hierarchy.

* cfq_cpd_bind() callback is implemented to clear per-blkg configs and
  apply the default config matching the hierarchy type.

* cfqd->root_group->[leaf_]weight initialization in cfq_init_queue()
  is moved into !CONFIG_CFQ_GROUP_IOSCHED block.  cfq_cpd_bind() is
  now responsible for initializing the initial weights when blkcg is
  enabled.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:36 -07:00
Tejun Heo 3ecca62931 blkcg: s/CFQ_WEIGHT_*/CFQ_WEIGHT_LEGACY_*/
blkcg is gonna switch to cgroup common weight range as defined by
CGROUP_WEIGHT_* on the unified hierarchy.  In preparation, rename
CFQ_WEIGHT_* constants to CFQ_WEIGHT_LEGACY_*.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:36 -07:00
Tejun Heo 2ee867dcfa blkcg: implement interface for the unified hierarchy
blkcg interface grew to be the biggest of all controllers and
unfortunately most inconsistent too.  The interface files are
inconsistent with a number of cloes duplicates.  Some files have
recursive variants while others don't.  There's distinction between
normal and leaf weights which isn't intuitive and there are a lot of
stat knobs which don't make much sense outside of debugging and expose
too much implementation details to userland.

In the unified hierarchy, everything is always hierarchical and
internal nodes can't have tasks rendering the two structural issues
twisting the current interface.  The interface has to be updated in a
significant anyway and this is a good chance to revamp it as a whole.
This patch implements blkcg interface for the unified hierarchy.

* (from a previous patch) blkcg is identified by "io" instead of
  "blkio" on the unified hierarchy.  Given that the whole interface is
  updated anyway, the rename shouldn't carry noticeable conversion
  overhead.

* The original interface consisted of 27 files is replaced with the
  following three files.

  blkio.stat	: per-blkcg stats
  blkio.weight	: per-cgroup and per-cgroup-queue weight settings
  blkio.max	: per-cgroup-queue bps and iops max limits

Documentation/cgroups/unified-hierarchy.txt updated accordingly.

v2: blkcg_policy->dfl_cftypes wasn't removed on
    blkcg_policy_unregister() corrupting the cftypes list.  Fixed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:35 -07:00
Tejun Heo dd165eb3bb blkcg: misc preparations for unified hierarchy interface
* Export blkg_dev_name()

* Drop unnecessary @cft from __cfq_set_weight().

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:18 -07:00
Tejun Heo 36aa9e5f59 blkcg: move body parsing from blkg_conf_prep() to its callers
Currently, blkg_conf_prep() expects input to be of the following form

 MAJ:MIN NUM

and reads the NUM part into blkg_conf_ctx->v.  This is quite
restrictive and gets in the way in implementing blkcg interface for
the unified hierarchy.  This patch updates blkg_conf_prep() so that it
expects

 MAJ:MIN BODY_STR

where BODY_STR is an arbitrary string.  blkg_conf_ctx->v is replaced
with ->body which is a char pointer pointing to the start of BODY_STR.
Parsing of the body is moved to blkg_conf_prep()'s callers.

To allow using, for example, strsep() on blkg_conf_ctx->val, it is a
non-const pointer and to accommodate that const is dropped from @input
too.

This doesn't cause any behavior changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:18 -07:00
Tejun Heo 880f50e228 blkcg: mark existing cftypes as legacy
blkcg is about to grow interface for the unified hierarchy.  Add
legacy to existing cftypes.

* blkcg_policy->cftypes -> blkcg_policy->legacy_cftypes
* blk-cgroup.c:blkcg_files -> blkcg_legacy_files
* cfq-iosched.c:cfq_blkcg_files -> cfq_blkcg_legacy_files
* blk-throttle.c:throtl_files -> throtl_legacy_files

Pure renames.  No functional change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:18 -07:00
Tejun Heo 20386ce014 blkcg: refine error codes returned during blkcg configuration
blkcg currently returns -EINVAL for most errors which can be pretty
confusing given that the failure modes are quite varied.  Update the
error returns so that

* -EINVAL only for syntactic errors.
* -ERANGE if the value is out of range.
* -ENODEV if the target device can't be found.
* -EOPNOTSUPP if the policy is not enabled on the target device.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:18 -07:00
Tejun Heo 5332dfc364 blkcg: remove unnecessary NULL checks from __cfqg_set_weight_device()
blkg_to_cfqg() and blkcg_to_cfqgd() on a valid blkg with the policy
enabled are guaranteed to return non-NULL and the counterpart in
blk-throttle doesn't have these checks either.  Remove the spurious
NULL checks.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:18 -07:00
Tejun Heo 702747cabe blkcg: remove cfqg_stats->sectors
cfq_stats->sectors is a blkg_stat which keeps track of the total
number of sectors serviced; however, this can be trivially calculated
from blkcg_gq->stat_bytes.  The only thing necessary is adding up
READs and WRITEs and then dividing by sector size.

Remove cfqg_stats->sectors and make cfq print "sectors" and
"sectors_recursive" from stat_bytes.

While this is a bit more code, it removes duplicate stat allocations
and updates and ensures that the reported stats stay in tune with each
other.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:18 -07:00
Tejun Heo 77ea733884 blkcg: move io_service_bytes and io_serviced stats into blkcg_gq
Currently, both cfq-iosched and blk-throttle keep track of
io_service_bytes and io_serviced stats.  While keeping track of them
separately may be useful during development, it doesn't make much
sense otherwise.  Also, blk-throttle was counting bio's as IOs while
cfq-iosched request's, which is more confusing than informative.

This patch adds ->stat_bytes and ->stat_ios to blkg (blkcg_gq),
removes the counterparts from cfq-iosched and blk-throttle and let
them print from the common blkg counters.  The common counters are
incremented during bio issue in blkcg_bio_issue_check().

The outputs are still filtered by whether the policy has
blkg_policy_data on a given blkg, so cfq's output won't show up if it
has never been used for a given blkg.  The only times when the outputs
would differ significantly are when policies are attached on the fly
or elevators are switched back and forth.  Those are quite exceptional
operations and I don't think they warrant keeping separate counters.

v3: Update blkio-controller.txt accordingly.

v2: Account IOs during bio issues instead of request completions so
    that bio-based drivers can be handled the same way.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:17 -07:00
Tejun Heo f12c74cab1 blkcg: make blkg_[rw]stat_recursive_sum() to be able to index into blkcg_gq
Currently, blkg_[rw]stat_recursive_sum() assume that the target
counter is located in pd (blkg_policy_data); however, some counters
are planned to be moved to blkg (blkcg_gq).

This patch updates blkg_[rw]stat_recursive_sum() to take blkg and
blkg_policy pointers instead of pd.  If policy is NULL, it indexes
into blkg.  If non-NULL, into the blkg's pd of the policy.

The existing usages are updated to maintain the current behaviors.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:17 -07:00
Tejun Heo 24bdb8ef06 blkcg: make blkcg_[rw]stat per-cpu
blkcg_[rw]stat are used as stat counters for blkcg policies.  It isn't
per-cpu by itself and blk-throttle makes it per-cpu by wrapping around
it.  This patch makes blkcg_[rw]stat per-cpu and drop the ad-hoc
per-cpu wrapping in blk-throttle.

* blkg_[rw]stat->cnt is replaced with cpu_cnt which is struct
  percpu_counter.  This makes syncp unnecessary as remote accesses are
  handled by percpu_counter itself.

* blkg_[rw]stat_init() can now fail due to percpu allocation failure
  and thus are updated to return int.

* percpu_counters need explicit freeing.  blkg_[rw]stat_exit() added.

* As blkg_rwstat->cpu_cnt[] can't be read directly anymore, reading
  and summing results are stored in ->aux_cnt[] instead.

* Custom per-cpu stat implementation in blk-throttle is removed.

This makes all blkcg stat counters per-cpu without complicating policy
implmentations.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:17 -07:00
Tejun Heo e6269c4454 blkcg: add blkg_[rw]stat->aux_cnt and replace cfq_group->dead_stats with it
cgroup stats are local to each cgroup and doesn't propagate to
ancestors by default.  When recursive stats are necessary, the sum is
calculated over all the descendants.  This initially was for backward
compatibility to support both group-local and recursive stats but this
mode of operation makes general sense as stat update is much hotter
thafn reporting those stats.

This however ends up losing recursive stats when a child is removed.
To work around this, cfq-iosched adds its stats to its parent
cfq_group->dead_stats which is summed up together when calculating
recursive stats.

It's planned that the core stats will be moved to blkcg_gq, so we want
to move the mechanism for keeping track of the stats of dead children
from cfq to blkcg core.  This patch adds blkg_[rw]stat->aux_cnt which
are atomic64_t's keeping track of auxiliary counts which are excluded
when reading local counts but included for recursive.

blkg_[rw]stat_merge() which were used by cfq to implement dead_stats
are replaced by blkg_[rw]stat_add_aux(), and cfq now forwards stats of
a dead cgroup to the aux counts of parent->stats instead of separate
->dead_stats.

This will also help making blkg_[rw]stats per-cpu.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:17 -07:00
Tejun Heo ae11889636 blkcg: consolidate blkg creation in blkcg_bio_issue_check()
blkg (blkcg_gq) currently is created by blkcg policies invoking
blkg_lookup_create() which ends up repeating about the same code in
different policies.  Theoretically, this can avoid the overhead of
looking and/or creating blkg's if blkcg is enabled but no policy is in
use; however, the cost of blkg lookup / creation is very low
especially if only the root blkcg is in use which is highly likely if
no blkcg policy is in active use - it boils down to a single very
predictable conditional and surrounding RCU protection.

This patch consolidates blkg creation to a new function
blkcg_bio_issue_check() which is called during bio issue from
generic_make_request_checks().  blkcg_bio_issue_check() is now the
only function which tries to create missing blkg's.  The subsequent
policy and request_list operations just perform blkg_lookup() and if
missing falls back to the root.

* blk_get_rl() no longer tries to create blkg.  It uses blkg_lookup()
  instead of blkg_lookup_create().

* blk_throtl_bio() is now called from blkcg_bio_issue_check() with rcu
  read locked and blkg already looked up.  Both throtl_lookup_tg() and
  throtl_lookup_create_tg() are dropped.

* cfq is similarly updated.  cfq_lookup_create_cfqg() is replaced with
  cfq_lookup_cfqg()which uses blkg_lookup().

This consolidates blkg handling and avoids unnecessary blkg creation
retries under memory pressure.  In addition, this provides a common
bio entry point into blkcg where things like common accounting can be
performed.

v2: Build fixes for !CONFIG_CFQ_GROUP_IOSCHED and
    !CONFIG_BLK_DEV_THROTTLING.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:17 -07:00
Tejun Heo e4a9bde958 blkcg: replace blkcg_policy->cpd_size with ->cpd_alloc/free_fn() methods
Each active policy has a cpd (blkcg_policy_data) on each blkcg.  The
cpd's were allocated by blkcg core and each policy could request to
allocate extra space at the end by setting blkcg_policy->cpd_size
larger than the size of cpd.

This is a bit unusual but blkg (blkcg_gq) policy data used to be
handled this way too so it made sense to be consistent; however, blkg
policy data switched to alloc/free callbacks.

This patch makes similar changes to cpd handling.
blkcg_policy->cpd_alloc/free_fn() are added to replace ->cpd_size.  As
cpd allocation is now done from policy side, it can simply allocate a
larger area which embeds cpd at the beginning.

As ->cpd_alloc_fn() may be able to perform all necessary
initializations, this patch makes ->cpd_init_fn() optional.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:17 -07:00
Tejun Heo 814376483e blkcg: minor updates around blkcg_policy_data
* Rename blkcg->pd[] to blkcg->cpd[] so that cpd is consistently used
  for blkcg_policy_data.

* Make blkcg_policy->cpd_init_fn() take blkcg_policy_data instead of
  blkcg.  This makes it consistent with blkg_policy_data methods and
  to-be-added cpd alloc/free methods.

* blkcg_policy_data->blkcg and cpd_to_blkcg() added so that
  cpd_init_fn() can determine the associated blkcg from
  blkcg_policy_data.

v2: blkcg_policy_data->blkcg initializations were missing.  Added.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:17 -07:00
Tejun Heo a9520cd6f2 blkcg: make blkcg_policy methods take a pointer to blkcg_policy_data
The newly added ->pd_alloc_fn() and ->pd_free_fn() deal with pd
(blkg_policy_data) while the older ones use blkg (blkcg_gq).  As using
blkg doesn't make sense for ->pd_alloc_fn() and after allocation pd
can always be mapped to blkg and given that these are policy-specific
methods, it makes sense to converge on pd.

This patch makes all methods deal with pd instead of blkg.  Most
conversions are trivial.  In blk-cgroup.c, a couple method invocation
sites now test whether pd exists instead of policy state for
consistency.  This shouldn't cause any behavioral differences.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:17 -07:00
Tejun Heo b2ce2643cc blk-throttle: clean up blkg_policy_data alloc/init/exit/free methods
With the recent addition of alloc and free methods, things became
messier.  This patch reorganizes them according to the followings.

* ->pd_alloc_fn()

  Responsible for allocation and static initializations - the ones
  which can be done independent of where the pd might be attached.

* ->pd_init_fn()

  Initializations which require the knowledge of where the pd is
  attached.

* ->pd_free_fn()

  The counter part of pd_alloc_fn().  Static de-init and freeing.

This leaves ->pd_exit_fn() without any users.  Removed.

While at it, collapse an one liner function throtl_pd_exit(), which
has only one user, into its user.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:17 -07:00
Tejun Heo 001bea73e7 blkcg: replace blkcg_policy->pd_size with ->pd_alloc/free_fn() methods
A blkg (blkcg_gq) represents the relationship between a cgroup and
request_queue.  Each active policy has a pd (blkg_policy_data) on each
blkg.  The pd's were allocated by blkcg core and each policy could
request to allocate extra space at the end by setting
blkcg_policy->pd_size larger than the size of pd.

This is a bit unusual but was done this way mostly to simplify error
handling and all the existing use cases could be handled this way;
however, this is becoming too restrictive now that percpu memory can
be allocated without blocking.

This introduces two new mandatory blkcg_policy methods - pd_alloc_fn()
and pd_free_fn() - which are used to allocate and release pd for a
given policy.  As pd allocation is now done from policy side, it can
simply allocate a larger area which embeds pd at the beginning.  This
change makes ->pd_size pointless.  Removed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:16 -07:00
Tejun Heo 60a837077e cfq-iosched: charge async IOs to the appropriate blkcg's instead of the root
Up until now, all async IOs were queued to async queues which are
shared across the whole request_queue, which means that blkcg resource
control is completely void on async IOs including all writeback IOs.
It was done this way because writeback didn't support writeback and
there was no way of telling which writeback IO belonged to which
cgroup; however, writeback recently became cgroup aware and writeback
bio's are sent down properly tagged with the blkcg's to charge them
against.

This patch makes async cfq_queues per-cfq_cgroup instead of
per-cfq_data so that each async IO is charged to the blkcg that it was
tagged for instead of unconditionally attributing it to root.

* cfq_data->async_cfqq and ->async_idle_cfqq are moved to cfq_group
  and alloc / destroy paths are updated accordingly.

* cfq_link_cfqq_cfqg() no longer overrides @cfqg to root for async
  queues.

* check_blkcg_changed() now also invalidates async queues as they no
  longer stay the same across cgroups.

After this patch, cfq's proportional IO control through blkio.weight
works correctly when cgroup writeback is in use.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:16 -07:00
Tejun Heo d4aad7ff04 cfq-iosched: fold cfq_find_alloc_queue() into cfq_get_queue()
cfq_find_alloc_queue() checks whether a queue actually needs to be
allocated, which is unnecessary as its sole caller, cfq_get_queue(),
only calls it if so.  Also, the oom queue fallback logic is scattered
between cfq_get_queue() and cfq_find_alloc_queue().  There really
isn't much going on in the latter and things can be made simpler by
folding it into cfq_get_queue().

This patch collapses cfq_find_alloc_queue() into cfq_get_queue().  The
change is fairly straight-forward with one exception - async_cfqq is
now initialized to NULL and the "!is_sync" test in the last if
conditional is replaced with "async_cfqq" test.  This is because gcc
(5.1.1) gets confused for some reason and warns that async_cfqq may be
used uninitialized otherwise.  Oh well, the code isn't necessarily
worse this way.

This patch doesn't cause any functional difference.

v2: Updated to reflect GFP_ATOMIC -> GPF_NOWAIT.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:16 -07:00
Tejun Heo 322731ed0d cfq-iosched: move cfq_group determination from cfq_find_alloc_queue() to cfq_get_queue()
This is necessary for making async cfq_cgroups per-cfq_group instead
of per-cfq_data.  While this change makes cfq_get_queue() perform RCU
locking and look up cfq_group even when it reuses async queue, the
extra overhead is extremely unlikely to be noticeable given that this
is already sitting behind cic->cfqq[] cache and the overall cost of
cfq operation.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:16 -07:00
Tejun Heo 2da8de0bb7 cfq-iosched: remove @gfp_mask from cfq_find_alloc_queue()
Even when allocations fail, cfq_find_alloc_queue() always returns a
valid cfq_queue by falling back to the oom cfq_queue.  As such, there
isn't much point in taking @gfp_mask and trying "harder" if __GFP_WAIT
is set.  GFP_NOWAIT allocations don't fail often and even when they do
the degraded behavior is acceptable and temporary.

After all, the only reason get_request(), which ultimately determines
the gfp_mask, cares about __GFP_WAIT is to guarantee request
allocation, assuming IO forward progress, for callers which are
willing to wait.  There's no reason for cfq_find_alloc_queue() to
behave differently on __GFP_WAIT when it already has a fallback
mechanism.

Remove @gfp_mask from cfq_find_alloc_queue() and propagate the changes
to its callers.  This simplifies the function quite a bit and will
help making async queues per-cfq_group.

v2: Updated to reflect GFP_ATOMIC -> GPF_NOWAIT.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:16 -07:00
Tejun Heo d93a11f1cd blkcg, cfq-iosched: use GFP_NOWAIT instead of GFP_ATOMIC for non-critical allocations
blkcg performs several allocations to track IOs per cgroup and enforce
resource control.  Most of these allocations are performed lazily on
demand in the IO path and thus can't involve reclaim path.  Currently,
these allocations use GFP_ATOMIC; however, blkcg can gracefully deal
with occassional failures of these allocations by punting IOs to the
root cgroup and there's no reason to reach into the emergency reserve.

This patch replaces GFP_ATOMIC with GFP_NOWAIT for the following
allocations.

* bdi_writeback_congested and blkcg_gq allocations in blkg_create().

* radix tree node allocations for blkcg->blkg_tree.

* cfq_queue allocation on ioprio changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-and-Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Suggested-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:16 -07:00
Tejun Heo 563180a44b cfq-iosched: minor cleanups
* Some were accessing cic->cfqq[] directly.  Always use cic_to_cfqq()
  and cic_set_cfqq().

* check_ioprio_changed() doesn't need to verify cfq_get_queue()'s
  return for NULL.  It's always non-NULL.  Simplify accordingly.

This patch doesn't cause any functional changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:16 -07:00
Tejun Heo bce6133b09 cfq-iosched: fix oom cfq_queue ref leak in cfq_set_request()
If the cfq_queue cached in cfq_io_cq is the oom one, cfq_set_request()
replaces it by invoking cfq_get_queue() again without putting the oom
queue leaking the reference it was holding.  While oom queues are not
released through reference counting, they're still reference counted
and this can theoretically lead to the reference count overflowing and
incorrectly invoke the usual release path on it.

Fix it by making cfq_set_request() put the ref it was holding.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:16 -07:00
Tejun Heo 95e5d6f626 cfq-iosched: fix async oom queue handling
Async cfqq's (cfq_queue's) are shared across cfq_data.  When
cfq_get_queue() obtains a new queue from cfq_find_alloc_queue(), it
stashes the pointer in cfq_data and reuses it from then on; however,
the function doesn't consider that cfq_find_alloc_queue() may return
the oom_cfqq under memory pressure and installs the returned queue
unconditionally.

If the oom_cfqq is installed as an async cfqq, cfq_set_request() will
continue calling cfq_get_queue() hoping to replace it with a proper
queue; however, cfq_get_queue() will keep returning the cached queue
for the slot - the oom_cfqq.

Fix it by skipping caching if the queue is the oom one.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:15 -07:00
Tejun Heo 4ebc1c61d6 cfq-iosched: simplify control flow in cfq_get_queue()
cfq_get_queue()'s control flow looks like the following.

	async_cfqq = NULL;
	cfqq = NULL;

	if (!is_sync) {
		...
		async_cfqq = ...;
		cfqq = *async_cfqq;
	}

	if (!cfqq)
		cfqq = ...;

	if (!is_sync && !(*async_cfqq))
		...;

The only thing the local variable init, the second if, and the
async_cfqq test in the third if achieves is to skip cfqq creation and
installation if *async_cfqq was already non-NULL.  This is needlessly
complicated with different tests examining the same condition.
Simplify it to the following.

	if (!is_sync) {
		...
		async_cfqq = ...;
		cfqq = *async_cfqq;
		if (cfqq)
			goto out;
	}

	cfqq = ...;

	if (!is_sync)
		...;
 out:

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:15 -07:00
Linus Torvalds e4bc13adfd Merge branch 'for-4.2/writeback' of git://git.kernel.dk/linux-block
Pull cgroup writeback support from Jens Axboe:
 "This is the big pull request for adding cgroup writeback support.

  This code has been in development for a long time, and it has been
  simmering in for-next for a good chunk of this cycle too.  This is one
  of those problems that has been talked about for at least half a
  decade, finally there's a solution and code to go with it.

  Also see last weeks writeup on LWN:

        http://lwn.net/Articles/648292/"

* 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits)
  writeback, blkio: add documentation for cgroup writeback support
  vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB
  writeback: do foreign inode detection iff cgroup writeback is enabled
  v9fs: fix error handling in v9fs_session_init()
  bdi: fix wrong error return value in cgwb_create()
  buffer: remove unusued 'ret' variable
  writeback: disassociate inodes from dying bdi_writebacks
  writeback: implement foreign cgroup inode bdi_writeback switching
  writeback: add lockdep annotation to inode_to_wb()
  writeback: use unlocked_inode_to_wb transaction in inode_congested()
  writeback: implement unlocked_inode_to_wb transaction and use it for stat updates
  writeback: implement [locked_]inode_to_wb_and_lock_list()
  writeback: implement foreign cgroup inode detection
  writeback: make writeback_control track the inode being written back
  writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb()
  mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use
  writeback: implement memcg writeback domain based throttling
  writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes
  writeback: implement memcg wb_domain
  writeback: update wb_over_bg_thresh() to use wb_domain aware operations
  ...
2015-06-25 16:00:17 -07:00
Jens Axboe ae994ea972 cfq-iosched: fix other locations where blkcg_to_cfqgd() can return NULL
Commit 9470e4a693 only covered the initial bug report, there are
other spots in CFQ where we need to check that we actually have
a valid cfq_group_data structure.

Fixes: e48453c3 ("block, cgroup: implement policy-specific per-blkcg data")
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-20 10:26:50 -06:00
Jens Axboe 9470e4a693 cfq-iosched: fix sysfs oops when attempting to read unconfigured weights
If none of the devices in the system are using CFQ, then attempting to
read:

/sys/fs/cgroup/blkio/blkio.leaf_weight

will results in a NULL dereference. Check for a valid cfq_group_data
struct before attempting to dereference it.

Reported-by: Andrey Wagin <avagin@gmail.com>
Fixes: e48453c3 ("block, cgroup: implement policy-specific per-blkcg data")
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-19 10:19:36 -06:00
Jens Axboe 4ceab71b9d cfq-iosched: move group scheduling functions under ifdef
If CFQ_GROUP_IOSCHED is not set, the compiler produces the
following warning:

  CC      block/cfq-iosched.o
  linux/block/cfq-iosched.c:469:2:
    warning: 'cpd_to_cfqgd' defined but not used [-Wunused-function]
    *cpd_to_cfqgd(struct blkcg_policy_data *cpd)
     ^

In reality, two other lookup functions aren't used either if
CFQ_GROUP_IOSCHED isn't set. Move all three under one of the
CFQ_GROUP_IOSCHED sections in the code.

Reported-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-19 10:13:01 -06:00