Commit Graph

1288 Commits

Author SHA1 Message Date
Linus Torvalds decf7abcc9 sound fixes for 3.12-rc1
A few last-minute fixes for 3.12-rc1.  All patches are driver specific.
 
 - HD-audio fixes: MacBook 6,1/6,2 speaker fix, ASUS TX300 dock speaker
   fix, Toshiba Satellite irq fix, Haswell HDMI audio cleanups)
 
 - ASoC fixes: atmel irq fix, fsl DT fix, mc13783 spi fix, kirkwood
   compatible string change, etc
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJSMWJeAAoJEGwxgFQ9KSmkkLsP/RMeleT18hbZEhdSZsJaqErg
 p6Dk59fb28HrQrY/ECcZnBChGFgCagS316lBjuEkDtQmZdhYtIDHV9r/udV4MbFc
 rX4IVNv1JerpCyZu4pC0yngHiEX3NMBmu204RJBC8vzJt3fupTFIioliNQlmMuiR
 k6Kb9kGmNHLtA7LwshHwNs8JwXEJHUcnsBGdPB0BUy8BpZ8FVTIOvuBixpxv9kXm
 +n80KRhY/YBjpU+bTvGTgJhH7U3BXylU20q5cO2ukv8vW79LGNZ0XA5Rnerrlr/F
 fvDzg+liOEV8ijchfS9rhs28J+4ICHmFkY/rj7QFpVpP9xYfpqhvw93KmIACirDX
 DlJt63fOJuHbGEv5cGjAmdZXcKONoD9fG11CKDj46Fm4borNy7DdfmMLxNM3xo5q
 rxbgUWplCDHFRALXATJ3t8Occz71l2W+GjklmI7td8K5SD6JCzSI1GdR4YVVf76B
 Wd6AM3wpIGKdjCwZvT5jDBb/4O8ZMtOqEhxvBKI1eO4l+A3UbqWlBKyncfvpKBqY
 yHTBIOgF5QdtUMVSI0/hb64nzmOGHLAWxQoCZssvSFEV6P+jodrqGGayxvbM+6rU
 YR2w2omh+6UkacQvjyVWGehBHiYCECfl0kk9XmPVkIGgHmOdgvkv1/MMbPeEcoXv
 z2YGcgbOIBpNrLcgTev4
 =fKdg
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A few last-minute fixes for 3.12-rc1.  All patches are driver
  specific.

   - HD-audio fixes: MacBook 6,1/6,2 speaker fix, ASUS TX300 dock
     speaker fix, Toshiba Satellite irq fix, Haswell HDMI audio
     cleanups)

   - ASoC fixes: atmel irq fix, fsl DT fix, mc13783 spi fix, kirkwood
     compatible string change, etc"

* tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: mc13783: add spi errata fix
  ASoC: rsnd: fixup flag name of rsnd_scu_platform_info
  ALSA: hda - Add CS4208 codec support for MacBook 6,1 and 6,2
  ALSA: hda - Add Toshiba Satellite C870 to MSI blacklist
  ASoC: fsl_spdif: Select regmap-mmio
  ALSA: hda - unmute pin amplifier in infoframe setup for Haswell
  ALSA: hda - define is_haswell() to check if a display audio codec is Haswell
  ALSA: hda - Add dock speaker support for ASUS TX300
  ASoC: kirkwood: change the compatible string of the kirkwood-i2s driver
  ASoC: atmel: disable error interrupt
  ASoC: fsl: imx-audmux: Do not call imx_audmux_parse_dt_defaults() on non-dt kernel
2013-09-12 08:52:41 -07:00
Kuninori Morimoto 34e4447515 ASoC: rsnd: fixup flag name of rsnd_scu_platform_info
it should be *USE*, not *USB*

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-09 16:06:20 +01:00
Linus Torvalds 27c053aa8d Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
 "This series contains:
   - Exynos s5p-mfc driver got support for VP8 encoder
   - Some SoC drivers gained support for asynchronous registration
     (needed for DT)
   - The RC subsystem gained support for RC activity LED;
   - New drivers added: a video decoder(adv7842), a video encoder
     (adv7511), a new GSPCA driver (stk1135) and support for Renesas
     R-Car (vsp1)
   - the first SDR kernel driver: mirics msi3101.  Due to some troubles
     with the driver, and because the API is still under discussion, it
     will be merged at staging for 3.12.  Need to rework on it
   - usual new boards additions, fixes, cleanups and driver
     improvements"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (242 commits)
  [media] cx88: Fix regression: CX88_AUDIO_WM8775 can't be 0
  [media] exynos4-is: Fix entity unregistration on error path
  [media] exynos-gsc: Register v4l2 device
  [media] exynos4-is: Fix fimc-lite bayer formats
  [media] em28xx: fix assignment of the eeprom data
  [media] hdpvr: fix iteration over uninitialized lists in hdpvr_probe()
  [media] usbtv: Throw corrupted frames away
  [media] usbtv: Fix deinterlacing
  [media] v4l2: added missing mutex.h include to v4l2-ctrls.h
  [media] DocBook: upgrade media_api DocBook version to 4.2
  [media] ml86v7667: fix compile warning: 'ret' set but not used
  [media] s5p-g2d: Fix registration failure
  [media] media: coda: Fix DT driver data pointer for i.MX27
  [media] s5p-mfc: Fix input/output format reporting
  [media] v4l: vsp1: Fix mutex double lock at streamon time
  [media] v4l: vsp1: Add support for RT clock
  [media] v4l: vsp1: Initialize media device bus_info field
  [media] davinci: vpif_capture: fix error return code in vpif_probe()
  [media] davinci: vpif_display: fix error return code in vpif_probe()
  [media] MAINTAINERS: add entries for adv7511 and adv7842
  ...
2013-09-05 11:55:59 -07:00
Mark Brown 90d561bed9 Merge remote-tracking branch 'asoc/topic/fsl' into tmp 2013-09-01 21:15:52 +01:00
Mark Brown a3ef472de1 Merge remote-tracking branch 'asoc/topic/core' into tmp 2013-09-01 21:15:48 +01:00
Fabio Estevam d6bead020d ASoC: soc-pcm: Allow to specify unidirectional dai_link
Add 'playback_only' and 'capture_only' fields that can be used for specifying
that a dai_link has a unidirectional capability.

The motivation for this is for the cases of systems, such as Freescale MX28,
that has two unidirectional DAIs.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-01 16:29:27 +01:00
Lars-Peter Clausen d7b1538c7c ASoC: Remove unused sysfs_registered field from snd_soc_codec struct
The sysfs_registered field was added to the snd_soc_codec struct in commit
f0fba2ad ("ASoC: multi-component - ASoC Multi-Component Support"), but has never
been used.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-31 12:48:23 +01:00
Lars-Peter Clausen ad758a6704 ASoC: Remove unused debugfs_dapm field from snd_soc_{platform,codec} struct
The DAPM context struct has its own field where it stores the pointer to the
DAPM debugfs entry. The debugfs_dapm field in the snd_soc_platform and
snd_soc_codec structs are completely unused and can be removed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-31 12:48:23 +01:00
Lars-Peter Clausen 43d92e7d9a ASoC: Remove unused control_type field from snd_soc_codec struct
The control_type field was used by the core to track which raw IO methods to
use, but when switching to regmap this was no longer necessary and so the last
user of the field was removed in commit be3ea3b9 ("ASoC: Use new register map
API for ASoC generic physical I/O"). The field is now completely unused and can
be removed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-31 12:48:23 +01:00
Mark Brown c79c33af8f Merge remote-tracking branch 'asoc/topic/core' into tmp 2013-08-30 11:04:14 +01:00
Lars-Peter Clausen 824ef826f3 ASoC: Pass card instead of dapm context to snd_soc_dapm_new_widgets()
snd_soc_dapm_new_widgets() works on the ASoC card as a whole not on a specific
DAPM context. The DAPM context that is passed as the parameter is only used to
look up the pointer to the card. This patch updates the signature of
snd_soc_dapm_new_widgets() to take the card directly.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-27 15:41:16 +01:00
Mark Brown 38f7d75edc Merge remote-tracking branch 'asoc/topic/dapm' into asoc-core 2013-08-27 15:40:47 +01:00
Takashi Iwai 68538bf2bc ASoC: Updates for v3.12
- DAPM is now mandatory for CODEC drivers in order to avoid the repeated
   regressions in the special cases for non-DAPM CODECs and make it
   easier to integrate with other components on boards.  All existing
   drivers have had some level of DAPM support added.
 - A lot of cleanups in DAPM plus support for maintaining controls in a
   specific state while a DAPM widget all contributed by Lars-Peter Clausen.
 - Core helpers for bitbanged AC'97 reset from Markus Pargmann.
 - New drivers and support for Analog Devices ADAU1702 and ADAU1401(a),
   Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and WM8904 based
   machines, Freescale S/PDIF and SSI AC'97, Renesas R-Car SoCs, Samsung
   Exynos5420 SoCs, Texas Instruments PCM1681 and PCM1792A and Wolfson
   Microelectronics WM8997.
 - Support for building drivers that can support it cross-platform for
   compile test.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSF0rqAAoJELSic+t+oim9YK0P/0CwP7lAjL87EF+dUKW51raB
 7K8xtOgObec1+Fnc1FEbN6us1hXRkjZJMJyRqa3DO5EaNM5TUoxUa/+MNsKmyGXs
 UhoW7J2TUizxgStxszXdxLEZG5oErxwCtJR3xlIkAq4kcnUI0LwRtGctmguZH74a
 UFxd34tcq8LxytvBp1HaNgaG1OQqIqYUNHYXKCwZZMJRxk8TQU9NfAzlCOtWfPWp
 jjdsBkX6bypWzSV/0P8rdSvjhHlJ1vBw3XTD9jD1/EuC5J7qqKQvwo5Oid98QHiv
 /guV0zx6EPdW5IgyGVvlyc4e5zLrtrckj05Kjyy426mZUpLmGoQCPj+ZAZA+jdqo
 qX3M9lXdisx4FI1Ke+y00G64q9fOuNEyjHKnoMPbZXC7zBTLPC8znncM6Xk5MOx/
 Y+fSChecYzkCrBJqHZGUcMdl0/xL1cRrH6BP2I5ISn5ruEjmTuj3dD0JTUVRi1HM
 KGrLP6TnuY+yBMhoqbGsH7YtNN5NDbqnJrUXQy82GGHH++LlHs/0ljDdOCuwX774
 qu1PsyTwrBvCU9erJS4yTG1KIiFFLTn+exPvUOyjaTFVbs8PoX2NOC4/Ihqj+dvU
 UDj/Lh+/zF2BzrkxN65BwuXULElxjtoFvleWLzt7V8qOCb5LOzBVW8a7f5HQzfU6
 LsEXDtB4VkjGjOGAAsII
 =qzif
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v3.12

- DAPM is now mandatory for CODEC drivers in order to avoid the repeated
  regressions in the special cases for non-DAPM CODECs and make it
  easier to integrate with other components on boards.  All existing
  drivers have had some level of DAPM support added.
- A lot of cleanups in DAPM plus support for maintaining controls in a
  specific state while a DAPM widget all contributed by Lars-Peter Clausen.
- Core helpers for bitbanged AC'97 reset from Markus Pargmann.
- New drivers and support for Analog Devices ADAU1702 and ADAU1401(a),
  Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and WM8904 based
  machines, Freescale S/PDIF and SSI AC'97, Renesas R-Car SoCs, Samsung
  Exynos5420 SoCs, Texas Instruments PCM1681 and PCM1792A and Wolfson
  Microelectronics WM8997.
- Support for building drivers that can support it cross-platform for
  compile test.
2013-08-23 14:12:22 +02:00
Mark Brown b008387ab5 Merge remote-tracking branch 'asoc/topic/rcar' into asoc-next 2013-08-22 14:28:47 +01:00
Mark Brown 5388d48047 Merge remote-tracking branch 'asoc/topic/pxa' into asoc-next 2013-08-22 14:28:46 +01:00
Mark Brown 436f3562bb Merge remote-tracking branch 'asoc/topic/dapm' into asoc-next 2013-08-22 14:28:32 +01:00
Mark Brown 8157567013 Merge remote-tracking branch 'asoc/topic/core' into asoc-next 2013-08-22 14:28:31 +01:00
Mark Brown 6234eabf84 Merge remote-tracking branch 'asoc/topic/adsp' into asoc-next 2013-08-22 14:28:25 +01:00
Markus Pargmann 741a509f34 ASoC: core: Generic ac97 link reset functions
This patch adds generic ac97 reset functions using pincontrol and gpio
parsed from devicetree.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-20 11:02:00 +01:00
Tim Gardner bcbb15530e ALSA: pcm: Add snd_printd_ratelimit()
Direct calls to printk_limit() will emit log noise even when CONFIG_SND_DEBUG is not
defined. Add a wrapper macro around printk_limit() that is conditionally defined by
CONFIG_SND_DEBUG.

Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Yacine Belkadi <yacine.belkadi.1@gmail.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-19 15:48:33 +02:00
Ondrej Zary 59b564599b [media] tea575x: Move header from sound to media
Move include/sound/tea575x-tuner.h to include/media/tea575x.h and update files that include it.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-18 08:08:05 -03:00
Daniel Mack d65a14587a ASoC: pxa: use snd_dmaengine_dai_dma_data
Use snd_dmaengine_dai_dma_data for passing the dma parameters from
clients to the pxa pcm lib. This does no functional change, it's just an
intermedia step to migrate the pxa bits over to dmaengine.

The calculation of dcmd is a transition hack which will be removed again
in a later patch. It's just there to make the transition more readable.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-15 11:29:07 +01:00
Lars-Peter Clausen 9a953e6f27 ASoC: Use snd_soc_info_enum_double() for SOC_ENUM_EXT controls
snd_soc_info_enum_ext() and snd_soc_info_enum_double() are almost identical. The
only difference is that snd_soc_info_enum_double() is also able to handle stereo
controls. Using snd_soc_info_enum double() instead of snd_soc_info_enum_ext()
for the SOC_ENUM_EXT control's info callback allows us to remove
snd_soc_info_enum_ext().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-11 12:00:27 +01:00
Lars-Peter Clausen c77f872e66 ASoC: Remove unused snd_soc_info_volsw_ext()
The SOC_SINGLE_EXT control has been using snd_soc_info_volsw() for its info
callback since commit 1c433fb ("[ALSA] soc - 0.13 ASoC headers"). The
snd_soc_info_volsw_ext() function has been unused ever since then, so remove it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-11 12:00:26 +01:00
Kuninori Morimoto 374a528111 ASoC: rsnd: SSI supports DMA transfer via BUSIF
This patch adds BUSIF support for R-Car sound DMAEngine transfer.
The sound data will be transferred via FIFO which can cover blank time
which will happen when DMA channel is switching.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06 17:56:13 +01:00
Kuninori Morimoto 849fc82a6f ASoC: rsnd: SSI supports DMA transfer
This patch adds DMAEngine transfer on SSI.
But, it transfers sound data from memory to SSI directly
without using HPBIF at this time.
It will be updated soon

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06 17:56:13 +01:00
Kuninori Morimoto 4b4dab8234 ASoC: rsnd: remove platform dai and add dai_id on platform setting
Current rsnd driver is using struct rsnd_dai_platform_info
so that indicate sound DAI information (playback/capture SSI ID).
But, SSI settings were also required separately.
Thus, platform settings was very un-understandable.
This patch adds dai_id to SSI
settings, and removed rsnd_dai_platform_info.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06 17:56:13 +01:00
Lars-Peter Clausen 57295073b6 ASoC: dapm: Implement mixer input auto-disable
Some devices have the problem that if a internal audio signal source is disabled
the output of the source becomes undefined or goes to a undesired state (E.g.
DAC output goes to ground instead of VMID). In this case it is necessary, in
order to avoid unwanted clicks and pops, to disable any mixer input the signal
feeds into or to active a mute control along the path to the output. Often it is
still desirable to expose the same mixer input control to userspace, so cerain
paths can sill be disabled manually. This means we can not use conventional DAPM
to manage the mixer input control. This patch implements a method for letting
DAPM overwrite the state of a userspace visible control. I.e. DAPM will disable
the control if the path on which the control sits becomes inactive. Userspace
will then only see a cached copy of the controls state. Once DAPM powers the
path up again it will sync the userspace setting with the hardware and give
control back to userspace.

To implement this a new widget type is introduced. One widget of this type will
be created for each DAPM kcontrol which has the auto-disable feature enabled.
For each path that is controlled by the kcontrol the widget will be connected to
the source of that path. The new widget type behaves like a supply widget,
which means it will power up if one of its sinks are powered up and will only
power down if all of its sinks are powered down. In order to only have the mixer
input enabled when the source signal is valid the new widget type will be
disabled before all other widget types and only be enabled after all other
widget types.

E.g. consider the following simplified example. A DAC is connected to a mixer
and the mixer has a control to enable or disable the signal from the DAC.

                     +-------+
  +-----+            |       |
  | DAC |-----[Ctrl]-| Mixer |
  +-----+       :    |       |
     |          :    +-------+
     |          :
    +-------------+
    | Ctrl widget |
    +-------------+

If the control has the auto-disable feature enabled we'll create a widget for
the control. This widget is connected to the DAC as it is the source for the
mixer input. If the DAC powers up the control widget powers up and if the DAC
powers down the control widget is powered down. As long as the control widget
is powered down the hardware input control is kept disabled and if it is enabled
userspace can freely change the control's state.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 15:50:27 +01:00
Lars-Peter Clausen de9ba98b6d ASoC: dapm: Make widget power register settings more flexible
Currently the DAPM code is limited to only setting or clearing a single bit in a
register to power a widget up or down. This patch extends the DAPM code to be
more flexible in that regard and allow widgets to use arbitrary values to be
used to put a widget in either on or off state.

Since the snd_soc_dapm_widget struct already contains a on_val and off_val field
no additional fields need to be added and in fact the invert field can even be
removed. Also the generated code is slightly smaller.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 18:41:00 +01:00
Lars-Peter Clausen 5106b92f80 ASoC: dapm: Keep a list of paths per kcontrol
Currently we store for each path which control (if any at all) is associated
with that control. But we are only ever interested in the reverse relationship,
i.e. we want to know all the paths a certain control is associated with. This is
currently implemented by always iterating over all paths. This patch updates the
code to keep a list for each control which contains all the paths that are
associated with that control. This improves the run time of e.g.
soc_dapm_mixer_update_power() and soc_dapm_mux_update_power() from O(n) (with n
being the number of paths for the card) to O(1).

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 18:41:00 +01:00
Lars-Peter Clausen cf7c1de20c ASoC: dapm: Move 'value' field from widget to control
The 'value' field is really per control and not per widget. Currently it is only
used for virtual MUXes, which only have one control per widget. So in that case
there is not so much of a difference between whether it is stored per widget or
per control. Moving the 'value' field from the widget to the control will allow
us to use it also for cases where we have more than one control per widget. E.g.
for mixers with multiple input controls.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 18:41:00 +01:00
Lars-Peter Clausen eee5d7f99a ASoC: dapm: Add a helper to get the CODEC for DAPM kcontrol
We use the same 3 lines to get the CODEC for a kcontrol in a quite a few places.
This patch puts them into a common helper function. Having this encapsulated in
a helper function will also make it more easier to eventually change the data
layout of the kcontrol's private data.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 18:40:59 +01:00
Lars-Peter Clausen 564c65049e ASoC: dapm: Move snd_soc_dapm_update from dapm context to card
The update field of a DAPM context is only assigned while the card's dapm_mutex
is locked, the field is also cleared again while the mutex is stil locked. So
there will only ever be one DAPM context at a time with a non-NULL update field.
So it is safe to move the update field from the DAPM context struct to the card
struct. Doing so will allow further cleanups in this area.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 18:40:59 +01:00
Dimitris Papastamos 4fefd69853 ASoC: core: Add snd_soc_card_get_kcontrol()
This is useful for drivers who want to grab a pointer to
snd_kcontrol outside of the kcontrol callbacks.

Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 15:39:11 +01:00
Kuninori Morimoto ae5c322303 ASoC: add Renesas R-Car SSI feature
Renesas R-Car series sound circuit consists of SSI and its peripheral.
But this peripheral circuit is different between
R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2)
(Actually, there are many difference in Generation1 chips)

As 1st protype, this patch adds SSI feature on this driver.
But, it is PIO sound playback support only at this point.
The DMA transfer, and capture feature will be supported in the future

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-28 19:34:09 +01:00
Kuninori Morimoto dfc9403b7c ASoC: add Renesas R-Car ADG feature
Renesas R-Car series sound circuit consists of SSI and its peripheral.
But this peripheral circuit is different between
R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2)
(Actually, there are many difference in Generation1 chips)

This patch adds ADG feature which controls sound clock

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-28 19:34:09 +01:00
Kuninori Morimoto 07539c1de8 ASoC: add Renesas R-Car SCU feature
Renesas R-Car series sound circuit consists of SSI and its peripheral.
But this peripheral circuit is different between
R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2)
(Actually, there are many difference in Generation1 chips)

This patch adds SCU feature on this driver.
But, it defines SCU style only, does nothing at this point.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-28 19:34:09 +01:00
Kuninori Morimoto 3337744ac4 ASoC: add Renesas R-Car Generation feature
Renesas R-Car series sound circuit consists of SSI and its peripheral.
But this peripheral circuit is different between
R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2)
(Actually, there are many difference in Generation1 chips)

The main difference between Gen1 and Gen2 are
1) register offset, 2) data path

In order to control Gen1/Gen2 by same method,
this patch adds gen.c.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-28 19:34:09 +01:00
Kuninori Morimoto 1536a96889 ASoC: add Renesas R-Car core feature
Renesas R-Car series sound circuit consists of SSI and its peripheral.
But this peripheral circuits are different between
R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2).
(Actually, there are many difference in Generation1 chips)

Basically, for the future, Renesas R-Car series will use
Gen2 style sound circuit, but driver should care Gen1 also.
The main differences between Gen1 and Gen2 peripheral
are 1) register offset, 2) data path.

This patch adds basic (core) feature for R-Car
series sound driver as prototype

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-28 19:34:09 +01:00
Ondrej Zary 8fd79579c9 [media] tea575x-tuner: move HW init to a separate function
Move HW initialization to separate function to allow using the code without
the v4l parts. This is needed for use in the bttv driver.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-26 13:32:15 -03:00
Lars-Peter Clausen 6b3fc03b3b ASoC: dapm: Add a update parameter to snd_soc_dapm_{mux,mixer}_update_power
In order to avoid race conditions the assignment of dapm->update should happen
while card->dapm_mutex is being held. To allow CODEC drivers to run a register
update when using snd_soc_dapm_mux_update_power() or
snd_soc_dapm_mixer_update_power() add a update parameter to these two functions.
The update parameter will be assigned to dapm->update while card->dapm_mutex is
locked.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-24 14:56:19 +01:00
Lars-Peter Clausen ce6cfaf1de ASoC: dapm: Run widget updates for shared controls at the same time
Currently when updating a control that is shared between multiple widgets the
whole power-up/power-down sequence is being run once for each widget. The
control register is updated during the first run, which means the CODEC internal
routing is also updated for all widgets during this first run. The input and
output paths for each widgets are only updated though during the respective run
for that widget. This leads to a slight inconsistency between the CODEC's
internal state and ASoC's state, which causes non optimal behavior in regard to
click and pop avoidance.

E.g. consider the following setup where two MUXs share the same control.

          +------+
 A1 ------|      |
          | MUX1 |----- C1
 B1 ------|      |
          +------+
             |
  control ---+
             |
          +------+
 A2 ------|      |
          | MUX2 |----- C2
 B2 ------|      |
          +------+

If the control is updated to switch the MUXs from input A to input B with the
current code the power-up/power-down sequence will look like this:

Run soc_dapm_mux_update_power for MUX1
  Power-down A1
  Update MUXing
  Power-up B1

Run soc_dapm_mux_update_power for MUX2
  Power-down A2
  (Update MUXing)
  Power-up B2

Note that the second 'Update Muxing' is a no-op, since the register was already
updated.

While the preferred order for avoiding pops and clicks should be:

Run soc_dapm_mux_update_power for control
  Power-down A1
  Power-down A2
  Update MUXing
  Power-up B1
  Power-up B2

This patch changes the behavior to the later by running the updates for all
widgets that the control is attached to at the same time.

The new code is also a bit simpler since callers of
soc_dapm_{mux,muxer}_update_power don't have to loop over each widget anymore
and neither do we need to keep track for which of the kcontrol's widgets the
current update is.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-24 14:56:19 +01:00
Lars-Peter Clausen c3f48ae6fd ASoC: dapm: Pass snd_soc_card directly to soc_dpcm_runtime_update()
soc_dpcm_runtime_update() operates on a ASoC card as a whole. Currently it takes
a snd_soc_dapm_widget as its only parameter though. The widget is then used to
look up the card and is otherwise unused. This patch changes the function to
take a pointer to the card directly. This makes it possible to to call
soc_dpcm_runtime_update() for updates which are not related to one specific
widget.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-24 14:56:19 +01:00
Takashi Iwai accaf69da1 ASoC: More updates for v3.11
Some more fixes and enhancements, and also a bunch of refectoring for
 AC'97 support which enables more than one AC'97 controller driver to be
 built in.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRzXInAAoJELSic+t+oim9jBoQAJjGBiMyEyPv51CV5h2Cfo7c
 SGvoYwC+Q90fBsCLt4J/ei0rP+LUEbNUdnvs+xFeRiCqWHYs/d3/PeIZnuPMUQvZ
 VQOen7L1S+zd6mvDAr45LFmQOpAi74QkqRL1cwtuxWYeLJvFJwvYFTME6pYgjLi4
 HYAmZPZjMhOu3oNZmQIb+4Cmrf0/YbaIserI5kzHWd4b+pC8QCneBqvfwIaMowe0
 qBHw/bSB/haLTpjjbxZGw8NtnJyBvTT90ixgmv1akcZY/8NEh2bMIlzu52olNCci
 ZsCaS0HnjnICV7X5j6bBSjoqt7BQfXdQGFM7mbLn7BqW16MW/R0ONoSk1vE0RQQ0
 RGNYRA/X5yG4XReFE+93sHbJ2esGYnynwbykJd19DNFq0JRpdEpBUuudk8GsTEGh
 jsdh7YbRRGz1EUCxjiyMKiN7jHUhYGB9RRXjbR8Fo4GmTI1HHkOuv07gUfWr7v8F
 o2EcgvNdsEYtOrHP/Y7NCqkd7GkZOzDm3Xfp8Z5Wb81uKhJ3vbldvvUyjWBHrXLO
 Lzb2EACJYE8rqNN3FPsmNDBiuVlRrHeQQmtLL21lz5ZBK7b93+/NK44jN5OnNgU1
 D1PyErveZwogvtAUhZamx7FoZfnHxXQ4nNUWlLacBl3gRLrjzVqB8LQ9IdTyV1/V
 rqTrG1nTPJRCJLN0DLqq
 =UZaY
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: More updates for v3.11

Some more fixes and enhancements, and also a bunch of refectoring for
AC'97 support which enables more than one AC'97 controller driver to be
built in.
2013-06-28 13:36:22 +02:00
Mark Brown b047e1cce8 ASoC: ac97: Support multi-platform AC'97
Currently we can only have a single platform built in with AC'97 support
due to the use of a global variable to provide the bus operations. Fix
this by making that variable a pointer and having the bus drivers set the
operations prior to registering.

This is not a particularly good or nice approach but it avoids blocking
multiplatform and a real fix involves fixing the fairly deep problems
with AC'97 support - we should be converting it to a real bus.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-27 09:48:42 +01:00
Takashi Iwai 1ca2f2ec9e ALSA: vmaster: Add snd_ctl_sync_vmaster() helper function
Introduce a new helper function, snd_ctl_sync_vmaster(), which updates
the slave put callbacks forcibly as well as calling the hook.  This
will be used in the upcoming patch in HD-audio codec driver for
toggling the mute in vmaster slaves.

Along with the new function, the old snd_ctl_sync_vmaster_hook() is
replaced as a macro calling with the argument hook_only=true.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-24 15:51:54 +02:00
Takashi Iwai 0a1801e26c ASoC: Updates for v3.11
Not a big release subsystem wise, the main changes have been some nice
 improvements on the driver side:
 
 - Lots of cleanups and fixes for Blackfin, SGTL5000 and UX500.
 - Generalisation of the Bluetooth and HDMI stub drivers.
 - New CODEC drivers for SSM2518 and RT5640.
 - New machine driver for Tegra CPUs with RT5640.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRvz1tAAoJELSic+t+oim9x20QAIswcfaLkogh6AEhrP+ayzRA
 xuwrROZoaoHXCoD1xC/YkFYDbYWp69ms3JR5oYrplOpq1h5+jkmbAcsq2mllLL7y
 02uQP73acysze6YKB00wG/khAxmqTLENbiOLbQ2w+X7Ao6Gh0v/BRmNU34OSpj6R
 VDp9eNdLBJ4iZQ8m+S8NTn2bdxtqlRDVNP6aC6L8kxt2khuGTa3acGyFcer8hPwx
 WZFsP9lt5J+8rrZ6l3OH3ZpbldJRB+63ff5O+q0s5KihSfWEeVy3NgK7AG7chG4a
 mffoqymgrtjJDosuhNIwU0mjFLWdFoPI7byTi9Hd5WBJ+d3d1uNr1iFxD7+c+fWd
 Xr5PimssX983D9dbJN3yikzhQt7A2TK9OUCHXdWlLf2fCeYH5PwLySqaDPvmayvh
 5UccHo2j7sDcrztazCFqcfbSdEW/VA5mlHexz1xW9eGDWJncHDYdFPxDp45rwno4
 ZjilEOHNP/1HJl+Nl0D8HArYsk/svLY7t5SpITDjAMPHcCSND4ZH+WknnCFMl2sq
 R67LaeW4UHFUJk7fZHx3a3Gr90OsEC1yb0NaJJ59e8o8fV4e47wNp/yUjCULvSuP
 9136KjBQEofyR5xDiBM6HudFT1wEwpIva5YQoKKZgjqX2sYhwjH5SwfsSd0r25Mh
 PFKtvO1/U63w/AJyn/sM
 =gWf9
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v3.11

Not a big release subsystem wise, the main changes have been some nice
improvements on the driver side:

- Lots of cleanups and fixes for Blackfin, SGTL5000 and UX500.
- Generalisation of the Bluetooth and HDMI stub drivers.
- New CODEC drivers for SSM2518 and RT5640.
- New machine driver for Tegra CPUs with RT5640.
2013-06-21 17:52:58 +02:00
Mark Brown 60790c5735 Merge remote-tracking branch 'asoc/topic/rt5640' into asoc-next 2013-06-17 17:20:25 +01:00
Mark Brown 9805fe391d Merge remote-tracking branch 'asoc/topic/dapm' into asoc-next 2013-06-17 17:20:17 +01:00
Mark Brown 70fe99d8db Merge remote-tracking branch 'asoc/topic/core' into asoc-next 2013-06-17 17:20:16 +01:00