Commit Graph

323 Commits

Author SHA1 Message Date
Linus Torvalds c58b8e4a25 Merge branch 'e1000-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
* 'e1000-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  e1000: FIX: Stop raw interrupts disabled nag from RT
  e1000: FIX: firmware handover bits
  e1000: FIX: be ready for incoming irq at pci_request_irq
2007-04-27 10:14:53 -07:00
Mark Huth f50393fe86 e1000: FIX: Stop raw interrupts disabled nag from RT
Current e1000_xmit_frame spews raw interrupt disabled nag messages when
used with RT kernel patches.  This patch uses spin_trylock_irqsave,
which allows RT patches to properly manage the irq semantics.

Signed-off-by: Mark Huth <mhuth@mvista.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-26 02:22:41 -04:00
Bruce Allan 31d76442f7 e1000: FIX: firmware handover bits
Upon code inspection it was spotted that the firmware handover bit get/set
mismatched, which may have resulted in management issues on PCI-E
adapters. Setting them correctly may fix some management issues such
as arp routing etc.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-26 02:22:41 -04:00
Auke Kok e0aac5a289 e1000: FIX: be ready for incoming irq at pci_request_irq
DEBUG_SHIRQ code exposed that e1000 was not ready for incoming interrupts
after having called pci_request_irq. This obviously requires us to finish
our software setup which assigns the irq handler before we request the
irq.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-26 02:22:41 -04:00
Herbert Xu 628592ccdb [NETDRV]: Perform missing csum_offset conversions
When csum_offset was introduced we did a conversion from csum to
csum_offset where applicable.  A couple of drivers were missed in
this process.

It was harmless to begin with since the two fields coincided.  Now
that we've made them different with the addition of csum_start, the
missed drivers must be converted or they can't send packets out at
all that require checksum offload.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:28:41 -07:00
Arnaldo Carvalho de Melo 27d7ff46a3 [SK_BUFF]: Introduce skb_copy_to_linear_data{_offset}
To clearly state the intent of copying to linear sk_buffs, _offset being a
overly long variant but interesting for the sake of saving some bytes.

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2007-04-25 22:28:29 -07:00
Arnaldo Carvalho de Melo 27a884dc3c [SK_BUFF]: Convert skb->tail to sk_buff_data_t
So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes
on 64bit architectures, allowing us to combine the 4 bytes hole left by the
layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4
64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN...
:-)

Many calculations that previously required that skb->{transport,network,
mac}_header be first converted to a pointer now can be done directly, being
meaningful as offsets or pointers.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:26:28 -07:00
Arnaldo Carvalho de Melo aa8223c7bb [SK_BUFF]: Introduce tcp_hdr(), remove skb->h.th
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:25:26 -07:00
Arnaldo Carvalho de Melo ab6a5bb6b2 [TCP]: Introduce tcp_hdrlen() and tcp_optlen()
The ip_hdrlen() buddy, created to reduce the number of skb->h.th-> uses and to
avoid the longer, open coded equivalent.

Ditched a no-op in bnx2 in the process.

I wonder if we should have a BUG_ON(skb->h.th->doff < 5) in tcp_optlen()...

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:25:24 -07:00
Arnaldo Carvalho de Melo ea2ae17d64 [SK_BUFF]: Introduce skb_transport_offset()
For the quite common 'skb->h.raw - skb->data' sequence.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:25:16 -07:00
Arnaldo Carvalho de Melo 0660e03f6b [SK_BUFF]: Introduce ipv6_hdr(), remove skb->nh.ipv6h
Now the skb->nh union has just one member, .raw, i.e. it is just like the
skb->mac union, strange, no? I'm just leaving it like that till the transport
layer is done with, when we'll rename skb->mac.raw to skb->mac_header (or
->mac_header_offset?), ditto for ->{h,nh}.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:25:14 -07:00
Arnaldo Carvalho de Melo eddc9ec53b [SK_BUFF]: Introduce ip_hdr(), remove skb->nh.iph
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:25:10 -07:00
Arnaldo Carvalho de Melo bbe735e424 [SK_BUFF]: Introduce skb_network_offset()
For the quite common 'skb->nh.raw - skb->data' sequence.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:24:58 -07:00
Linus Torvalds 46fcc86dd7 Revert "e1000: fix NAPI performance on 4-port adapters"
This reverts commit 60cba200f1.  It's been
linked to lockups of the e1000 hardware, see for example

	https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=229603

but it's likely that the commit itself is not really introducing the
bug, but just allowing an unrelated problem to rear its ugly head (ie
one current working theory is that the code exposes us to a hardware
race condition by decreasing the amount of time we spend in each NAPI
poll cycle).

We'll revert it until root cause is known.  Intel has a repeatable
reproduction on two different machines and bus traces of the hardware
doing something bad.

Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg KH <gregkh@suse.de>
Cc: Dave Jones <davej@redhat.com>
Cc: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-19 18:21:01 -07:00
Dan Aloni 5c15bdec5c [VLAN]: Avoid a 4-order allocation.
This patch splits the vlan_group struct into a multi-allocated struct. On
x86_64, the size of the original struct is a little more than 32KB, causing
a 4-order allocation, which is prune to problems caused by buddy-system
external fragmentation conditions.

I couldn't just use vmalloc() because vfree() cannot be called in the
softirq context of the RCU callback.

Signed-off-by: Dan Aloni <da-x@monatomic.org>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-02 20:44:51 -08:00
Linus Torvalds b5bf28cde8 Revert "e1000: fix shared interrupt warning message"
This reverts commit d2ed16356f.

As Thomas Gleixner reports:
  "e1000 is not working anymore. ifup fails permanentely.
    ADDRCONF(NETDEV_UP): eth0: link is not ready
   nothing else"

The broken commit was identified with "git bisect".

Auke Kok says:
  "I think we need to drop this now.  The report that says that this
   *fixes* something might have been on regular interrupts only.  I
   currently suspect that it breaks all MSI interrupts, which would make
   sense if I look a the code.  Very bad indeed."

Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-21 11:21:44 -08:00
Linus Torvalds 874ff01bd9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (25 commits)
  Documentation/kernel-docs.txt update.
  arch/cris: typo in KERN_INFO
  Storage class should be before const qualifier
  kernel/printk.c: comment fix
  update I/O sched Kconfig help texts - CFQ is now default, not AS.
  Remove duplicate listing of Cris arch from README
  kbuild: more doc. cleanups
  doc: make doc. for maxcpus= more visible
  drivers/net/eexpress.c: remove duplicate comment
  add a help text for BLK_DEV_GENERIC
  correct a dead URL in the IP_MULTICAST help text
  fix the BAYCOM_SER_HDX help text
  fix SCSI_SCAN_ASYNC help text
  trivial documentation patch for platform.txt
  Fix typos concerning hierarchy
  Fix comment typo "spin_lock_irqrestore".
  Fix misspellings of "agressive".
  drivers/scsi/a100u2w.c: trivial typo patch
  Correct trivial typo in log2.h.
  Remove useless FIND_FIRST_BIT() macro from cardbus.c.
  ...
2007-02-19 13:29:02 -08:00
Kok, Auke ca6efb7d6c e1000: allow ethtool to see link status when down
By reading the MAC status register we can detect whether the MAC has
seen the PHY see link. This allows us to show the link properties before
the device is up in ethtool.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:37:14 -05:00
Kok, Auke 1d33e9c606 e1000: remove obsolete custom pci_save_state code
Now that 2.6.19 provides a proper implementation that saves MSI, PCI-E
config space, we can have the e1000 driver use those instead of it's
custom implementation.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:37:14 -05:00
Kok, Auke d2ed16356f e1000: fix shared interrupt warning message
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:37:14 -05:00
Robert P. J. Day d08df601a3 Various typo fixes.
Correct mis-spellings of "algorithm", "appear", "consistent" and
(shame, shame) "kernel".

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 19:07:33 +01:00
Linus Torvalds 78149df6d5 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (41 commits)
  Revert "PCI: remove duplicate device id from ata_piix"
  msi: Make MSI useable more architectures
  msi: Kill the msi_desc array.
  msi: Remove attach_msi_entry.
  msi: Fix msi_remove_pci_irq_vectors.
  msi: Remove msi_lock.
  msi: Kill msi_lookup_irq
  MSI: Combine pci_(save|restore)_msi/msix_state
  MSI: Remove pci_scan_msi_device()
  MSI: Replace pci_msi_quirk with calls to pci_no_msi()
  PCI: remove duplicate device id from ipr
  PCI: remove duplicate device id from ata_piix
  PCI: power management: remove noise on non-manageable hw
  PCI: cleanup MSI code
  PCI: make isa_bridge Alpha-only
  PCI: remove quirk_sis_96x_compatible()
  PCI: Speed up the Intel SMBus unhiding quirk
  PCI Quirk: 1k I/O space IOBL_ADR fix on P64H2
  shpchp: delete trailing whitespace
  shpchp: remove DBG_XXX_ROUTINE
  ...
2007-02-07 19:23:44 -08:00
Linas Vepstas 81b1955eef PCI: Use newly defined PCI channel offline routine
Use newly minted routine to access the PCI channel state.

Signed-off-by: Linas Vepstas <linas@linas.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:04 -08:00
Arjan van de Ven 1d39ed565c remove NETIF_F_TSO ifdefery
Remove the NETIF_F_TSO #ifdef-ery in drivers/net; this was
for old-old-2.4 compat (even current 2.4 has NETIF_F_TSO)
but it's time to get rid of it by now.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:45 -05:00
Auke Kok 7e72157947 e1000: update version to 7.3.20-k2
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2007-02-05 16:58:41 -05:00
Jesse Brandeburg 7753b171c4 e1000: tune our dynamic itr transmit packet accounting
The driver was still mis-calculating the number of bytes sent during
transmit, now the driver computes what appears to be exactly 100%
correct byte counts (not including CRC) when figuring out how many
bytes and frames were sent during the current transmit packet.
2007-02-05 16:58:41 -05:00
Bruce Allan f6c57bafcd e1000: clear ip csum info from context descriptor
Since the driver sets the IP checksum insertion bit (IXSM in Status
field) in transmit context descriptors, it should clear the IP checksum
bits of any garbage so as not to confuse the hardware.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2007-02-05 16:58:41 -05:00
Auke Kok 9669f53b98 e1000: display flow control of link status at link up
Print RX/TX flow control setting at link up time to display the
actual link FC properties instead of the advertised values.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2007-02-05 16:58:41 -05:00
Jesse Brandeburg 60cba200f1 e1000: fix NAPI performance on 4-port adapters
This fix attempts to solve a customer (IBM) reported issue with NAPI
enabled e1000 having bad performance when transmitting simultaneously
on four ports.  The issue comes down to an interaction between NAPI,
hardware interrupt balancing, and the driver rescheduling poll on
the same processor.  Try to fix by allowing the driver to re-enable
interrupts sooner instead of polling one more time, when there was
recently all the work completed in cleanup.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2007-02-05 16:58:41 -05:00
Jesse Brandeburg b5fc8f0c43 e1000: Fix MSI only interrupt handler routine
Unfortunately the read-free MSI interrupt handler needs to flush write
the icr register and thus we can't be read-free. Our MSI irq routine
thus becomes a lot more simpler since we don't need to track link state
anymore.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2007-02-05 16:58:41 -05:00
Auke Kok bf3cea4d8a e1000: clean up debug output defines
Remove unused MSGOUT macro and add "\n" to function debug output.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2007-02-05 16:58:41 -05:00
Jesse Brandeburg 9990fa3cbd e1000: simplify case handling gigabit at half duplex
Remvoe duplicate code handling erraneous user supplied wrong case
of gigabit speed with half duplex.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2007-02-05 16:58:41 -05:00
Jeff Garzik e6331173c8 Revert "[PATCH] e1000: disable TSO on the 82544 with slab debugging"
This reverts commit 72f3ab7462, which was
superceded by commit 683a2aa339
("e1000: Do not truncate TSO TCP header with 82544 workaround"), which
fixed the real problem.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-07 22:57:38 -05:00
Herbert Xu 683a2aa339 e1000: Do not truncate TSO TCP header with 82544 workaround
The e1000 driver has a workaround for 82544 on PCI-X where if the
terminating byte of a buffer is at addresses 0-3 mod 8, then 4 bytes
are shaved off it and defered to a new segment.  This is due to an
erratum that could otherwise cause TX hangs.

Unfortunately this breaks TSO because it may cause the TCP header to
be split over two segments which itself causes TX hangs.  The solution
is to pull 4 bytes of data up from the next segment rather than pushing
4 bytes off.  This ensures the TCP header remains in one piece and
works around the PCI-X hang.

This patch is based on one from Jesse Brandeburg.

This bug has been trigered by both CONFIG_DEBUG_SLAB as well as Xen.

Note that the only reason we don't see this normally is because the
TCP stack starts writing from the end, i.e., it writes the TCP header
first then slaps on the IP header, etc.  So the end of the TCP header
(skb->tail - 1 here) is always aligned correctly.

Had we made the start of the IP header (e.g., IPv6) 8-byte aligned
instead, this would happen for normal TCP traffic as well.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
--
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
--
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 16:28:20 -05:00
Jesse Brandeburg 79f3d3996f [PATCH] e1000: No-delay link detection at interface up
Currently after an interface up, the link state is detected 2 seconds later
when the first watchdog timer runs. This patch changes that by triggering
the hardware to generate a link-change interrupt from the up() function
instead. This has the result that the link state gets detected immediately
and without races. This has the potential to speed up booting since a normal
distribution boot process waits for a link before DHCP is attempted.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 15:51:30 -05:00
Jeff Garzik 15e376b4ee e1000: 3 new driver stats for managability testing
Add 3 extra packet redirect counters for tracking purposes to make sure
we can test that all packets arrive properly.

Originally from Jesse Brandeburg <jesse.brandeburg@intel.com>,
rewritten to use feature flags by me.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 15:51:30 -05:00
Jesse Brandeburg 1f753861d2 [PATCH] e1000: Make the copybreak value a module parameter
Allow the user to vary the size that copybreak works. Currently cb is enabled
for packets < 256 bytes, but various tests indicate that this should be
configurable for specific use cases. In addition, this parameter allows us
to force never/always during testing to get full and predictable coverage of
both code paths.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 15:51:30 -05:00
Bruce Allan 018ea44ef1 [PATCH] e1000: Fix PBA allocation calculations
Assign the PBA to be large enough to contain at least 2 jumbo frames on
all adapters. This dramatically increases performance on several adapters
and fixes TX performance degradation issues where the PBA was misallocated
in the old algorithm.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 15:51:30 -05:00
Jesse Brandeburg d89b6c6750 [PATCH] e1000: narrow down the scope of the tipg timer tweak
the driver has (ancient) code for messing with TIPG from the 82542 days.
Unfortunately this code was running on our current adapters and setting
TIPG for fiber to be +1 over the copper value.  This caused 1.45Mpps
to be sent instead of 1.487Mpps.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 15:51:30 -05:00
Jeff Kirsher c3813ae661 [PATCH] e1000: fix ethtool reported bus type for older adapters
For older adapters we know that they are of the PCI bus type, so we can
just set this.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 15:51:30 -05:00
Bruce Allan 83cd827977 [PATCH] e1000: fix to set the new max frame size before resetting the adapter
This bugfix makes sure that the driver data reflects the full new situation
before the adapter is reinitialized.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 15:51:30 -05:00
Jeff Garzik bb8e3311ef e1000: workaround for the ESB2 NIC RX unit issue
In rare occasions, ESB2 systems would end up started without the RX
unit being turned on. Add a check that runs post-init to work around
this issue.

Originally from Jesse Brandeburg <jesse.brandeburg@intel.com>,
rewritten to use feature flags by me.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 15:51:30 -05:00
Jesse Brandeburg 72f3ab7462 [PATCH] e1000: disable TSO on the 82544 with slab debugging
CONFIG_DEBUG_SLAB changes alignments of the data structures the slab
allocators return. These break certain workarounds for TSO on the 82544.
Since DEBUG_SLAB is relatively rare and not used for performance sensitive
cases, the simplest fix is to disable TSO in this special situation.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 15:51:29 -05:00
Jesse Brandeburg 3d5460a0ba [PATCH] e1000: Fix Wake-on-Lan with forced gigabit speed
If the user has forced gigabit speed, phy power management must be disabled;
otherwise the NIC would try to negotiate to a linkspeed of 10/100 mbit on
shutdown, which would lead to a total loss of link. This loss of link breaks
Wake-on-Lan and IPMI.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 15:51:29 -05:00
Jeff Garzik 0fccd0e9e3 e1000: consolidate managability enabling/disabling
Several bugs existed in how we handle manageability issues all
over the driver.  This patch consolidates all the managability
release and init code in two single functions and call them from
appropriate locations. This fixes several BMC packet redirect issues
and powerup/down hiccups.

Originally from Jesse Brandeburg <jesse.brandeburg@intel.com>, rewritten
to use feature flags by me.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 15:51:29 -05:00
Jeff Garzik 167fb28416 e1000: omit stats for broken counter in 82543
The 82543 chip does not count tx_carrier_errors properly in FD mode;
report zeros instead of garbage.

Originally from Jesse Brandeburg <jesse.brandeburg@intel.com>, rewritten
to use feature flags by me.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 15:51:28 -05:00
Jeff Garzik bd2371ebcc e1000: For sanity, reformat e1000_set_mac_type(), struct e1000_hw[_stats]
Makes future changes a bit more readable.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 15:51:28 -05:00
Jesse Brandeburg 2b65326e67 [PATCH] e1000: dynamic itr: take TSO and jumbo into account
The dynamic interrupt rate control patches omitted proper counting
for jumbo's and TSO resulting in suboptimal interrupt mitigation strategies.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 15:51:28 -05:00
Jesse Brandeburg 7d16e65ba5 [PATCH] e1000: The user-supplied itr setting needs the lower 2 bits masked off
The lower 2 bits of a user-supplied itr setting (via ethtool) need to be
masked off: These lower two bits are used as control bits.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 15:51:28 -05:00
David Howells 4c1ac1b491 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	drivers/infiniband/core/iwcm.c
	drivers/net/chelsio/cxgb2.c
	drivers/net/wireless/bcm43xx/bcm43xx_main.c
	drivers/net/wireless/prism54/islpci_eth.c
	drivers/usb/core/hub.h
	drivers/usb/input/hid-core.c
	net/core/netpoll.c

Fix up merge failures with Linus's head and fix new compilation failures.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05 14:37:56 +00:00