Commit Graph

742 Commits

Author SHA1 Message Date
Linus Torvalds 0f0d12728e Merge branch 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount flag updates from Al Viro:
 "Another chunk of fmount preparations from dhowells; only trivial
  conflicts for that part. It separates MS_... bits (very grotty
  mount(2) ABI) from the struct super_block ->s_flags (kernel-internal,
  only a small subset of MS_... stuff).

  This does *not* convert the filesystems to new constants; only the
  infrastructure is done here. The next step in that series is where the
  conflicts would be; that's the conversion of filesystems. It's purely
  mechanical and it's better done after the merge, so if you could run
  something like

	list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$')

	sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \
	        -e 's/\<MS_NOSUID\>/SB_NOSUID/g' \
	        -e 's/\<MS_NODEV\>/SB_NODEV/g' \
	        -e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \
	        -e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \
	        -e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \
	        -e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \
	        -e 's/\<MS_NOATIME\>/SB_NOATIME/g' \
	        -e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \
	        -e 's/\<MS_SILENT\>/SB_SILENT/g' \
	        -e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \
	        -e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \
	        -e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \
	        -e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \
	        $list

  and commit it with something along the lines of 'convert filesystems
  away from use of MS_... constants' as commit message, it would save a
  quite a bit of headache next cycle"

* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  VFS: Differentiate mount flags (MS_*) from internal superblock flags
  VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
  vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
2017-09-14 18:54:01 -07:00
Jérôme Glisse 2916ecc0f9 mm/migrate: new migrate mode MIGRATE_SYNC_NO_COPY
Introduce a new migration mode that allow to offload the copy to a device
DMA engine.  This changes the workflow of migration and not all
address_space migratepage callback can support this.

This is intended to be use by migrate_vma() which itself is use for thing
like HMM (see include/linux/hmm.h).

No additional per-filesystem migratepage testing is needed.  I disables
MIGRATE_SYNC_NO_COPY in all problematic migratepage() callback and i
added comment in those to explain why (part of this patch).  The commit
message is unclear it should say that any callback that wish to support
this new mode need to be aware of the difference in the migration flow
from other mode.

Some of these callbacks do extra locking while copying (aio, zsmalloc,
balloon, ...) and for DMA to be effective you want to copy multiple
pages in one DMA operations.  But in the problematic case you can not
easily hold the extra lock accross multiple call to this callback.

Usual flow is:

For each page {
 1 - lock page
 2 - call migratepage() callback
 3 - (extra locking in some migratepage() callback)
 4 - migrate page state (freeze refcount, update page cache, buffer
     head, ...)
 5 - copy page
 6 - (unlock any extra lock of migratepage() callback)
 7 - return from migratepage() callback
 8 - unlock page
}

The new mode MIGRATE_SYNC_NO_COPY:
 1 - lock multiple pages
For each page {
 2 - call migratepage() callback
 3 - abort in all problematic migratepage() callback
 4 - migrate page state (freeze refcount, update page cache, buffer
     head, ...)
} // finished all calls to migratepage() callback
 5 - DMA copy multiple pages
 6 - unlock all the pages

To support MIGRATE_SYNC_NO_COPY in the problematic case we would need a
new callback migratepages() (for instance) that deals with multiple
pages in one transaction.

Because the problematic cases are not important for current usage I did
not wanted to complexify this patchset even more for no good reason.

Link: http://lkml.kernel.org/r/20170817000548.32038-14-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Sherry Cheung <SCheung@nvidia.com>
Cc: Subhash Gutti <sgutti@nvidia.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Bob Liu <liubo95@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 18:26:46 -07:00
Jeff Layton 3b49c9a1e9 fs: convert a pile of fsync routines to errseq_t based reporting
This patch converts most of the in-kernel filesystems that do writeback
out of the pagecache to report errors using the errseq_t-based
infrastructure that was recently added. This allows them to report
errors once for each open file description.

Most filesystems have a fairly straightforward fsync operation. They
call filemap_write_and_wait_range to write back all of the data and
wait on it, and then (sometimes) sync out the metadata.

For those filesystems this is a straightforward conversion from calling
filemap_write_and_wait_range in their fsync operation to calling
file_write_and_wait_range.

Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
2017-08-01 08:39:29 -04:00
David Howells bc98a42c1f VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
Firstly by applying the following with coccinelle's spatch:

	@@ expression SB; @@
	-SB->s_flags & MS_RDONLY
	+sb_rdonly(SB)

to effect the conversion to sb_rdonly(sb), then by applying:

	@@ expression A, SB; @@
	(
	-(!sb_rdonly(SB)) && A
	+!sb_rdonly(SB) && A
	|
	-A != (sb_rdonly(SB))
	+A != sb_rdonly(SB)
	|
	-A == (sb_rdonly(SB))
	+A == sb_rdonly(SB)
	|
	-!(sb_rdonly(SB))
	+!sb_rdonly(SB)
	|
	-A && (sb_rdonly(SB))
	+A && sb_rdonly(SB)
	|
	-A || (sb_rdonly(SB))
	+A || sb_rdonly(SB)
	|
	-(sb_rdonly(SB)) != A
	+sb_rdonly(SB) != A
	|
	-(sb_rdonly(SB)) == A
	+sb_rdonly(SB) == A
	|
	-(sb_rdonly(SB)) && A
	+sb_rdonly(SB) && A
	|
	-(sb_rdonly(SB)) || A
	+sb_rdonly(SB) || A
	)

	@@ expression A, B, SB; @@
	(
	-(sb_rdonly(SB)) ? 1 : 0
	+sb_rdonly(SB)
	|
	-(sb_rdonly(SB)) ? A : B
	+sb_rdonly(SB) ? A : B
	)

to remove left over excess bracketage and finally by applying:

	@@ expression A, SB; @@
	(
	-(A & MS_RDONLY) != sb_rdonly(SB)
	+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
	|
	-(A & MS_RDONLY) == sb_rdonly(SB)
	+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
	)

to make comparisons against the result of sb_rdonly() (which is a bool)
work correctly.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-07-17 08:45:34 +01:00
Richard Weinberger a6664433d3 ubifs: Set double hash cookie also for RENAME_EXCHANGE
We developed RENAME_EXCHANGE and UBIFS_FLG_DOUBLE_HASH more or less in
parallel and this case was forgotten. :-(

Cc: stable@vger.kernel.org
Fixes: d63d61c169 ("ubifs: Implement UBIFS_FLG_DOUBLE_HASH")
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:50:57 +02:00
Xiaolei Li d8db5b1ca9 ubifs: Massage assert in ubifs_xattr_set() wrt. init_xattrs
The inode is not locked in init_xattrs when creating a new inode.

Without this patch, there will occurs assert when booting or creating
a new file, if the kernel config CONFIG_SECURITY_SMACK is enabled.

Log likes:

UBIFS assert failed in ubifs_xattr_set at 298 (pid 1156)
CPU: 1 PID: 1156 Comm: ldconfig Tainted: G S 4.12.0-rc1-207440-g1e70b02 #2
Hardware name: MediaTek MT2712 evaluation board (DT)
Call trace:
[<ffff000008088538>] dump_backtrace+0x0/0x238
[<ffff000008088834>] show_stack+0x14/0x20
[<ffff0000083d98d4>] dump_stack+0x9c/0xc0
[<ffff00000835d524>] ubifs_xattr_set+0x374/0x5e0
[<ffff00000835d7ec>] init_xattrs+0x5c/0xb8
[<ffff000008385788>] security_inode_init_security+0x110/0x190
[<ffff00000835e058>] ubifs_init_security+0x30/0x68
[<ffff00000833ada0>] ubifs_mkdir+0x100/0x200
[<ffff00000820669c>] vfs_mkdir+0x11c/0x1b8
[<ffff00000820b73c>] SyS_mkdirat+0x74/0xd0
[<ffff000008082f8c>] __sys_trace_return+0x0/0x4

Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:50:54 +02:00
Richard Weinberger 4acadda74f ubifs: Don't leak kernel memory to the MTD
When UBIFS prepares data structures which will be written to the MTD it
ensues that their lengths are multiple of 8. Since it uses kmalloc() the
padded bytes are left uninitialized and we leak a few bytes of kernel
memory to the MTD.
To make sure that all bytes are initialized, let's switch to kzalloc().
Kzalloc() is fine in this case because the buffers are not huge and in
the IO path the performance bottleneck is anyway the MTD.

Cc: stable@vger.kernel.org
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:50:52 +02:00
Hyunchul Lee 480a1a6a3e ubifs: Change gfp flags in page allocation for bulk read
In low memory situations, page allocations for bulk read
can kill applications for reclaiming memory, and print an
failure message when allocations are failed.
Because bulk read is just an optimization, we don't have
to do these and can stop page allocations.

Though this siutation happens rarely, add __GFP_NORETRY
to prevent from excessive memory reclaim and killing
applications, and __GFP_WARN to suppress this failure
message.

For this, Use readahead_gfp_mask for gfp flags when
allocating pages.

Signed-off-by: Hyunchul Lee <cheol.lee@lge.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:50:50 +02:00
karam.lee 07d41c3cf2 ubifs: Fix oops when remounting with no_bulk_read.
When remounting with the no_bulk_read option,
there is a problem accessing the "bulk_read buffer(bu.buf)"
which has already been freed.

If the bulk_read option is enabled,
ubifs_tnc_bulk_read uses the pre-allocated bu.buf.

While bu.buf is being used by ubifs_tnc_bulk_read,
remounting with no_bulk_read frees bu.buf.

So I added code to check the use of "bu.buf" to avoid this situation.

------
I tested as follows(kernel v3.18) :

Use the script to repeat "no_bulk_read <-> bulk_read"
	remount.sh
	#!/bin/sh
	while true do;
		mount -o remount,no_bulk_read ${MOUNT_POINT};
		sleep 1;
		mount -o remount,bulk_read ${MOUNT_POINT};
		sleep 1;
	done

Perform read operation
	cat ${MOUNT_POINT}/* > /dev/null

The problem is reproduced immediately.

[  234.256845][kernel.0]Internal error: Oops: 17 [#1] PREEMPT ARM
[  234.258557][kernel.0]CPU: 0 PID: 2752 Comm: cat Tainted: G        W  O   3.18.31+ #51
[  234.259531][kernel.0]task: cbff8580 ti: cbd66000 task.ti: cbd66000
[  234.260306][kernel.0]PC is at validate_data_node+0x10/0x264
[  234.260994][kernel.0]LR is at ubifs_tnc_bulk_read+0x388/0x3ec
[  234.261712][kernel.0]pc : [<c01d98fc>]    lr : [<c01dc300>]    psr: 80000013
[  234.261712][kernel.0]sp : cbd67ba0  ip : 00000001  fp : 00000000
[  234.263337][kernel.0]r10: cd3e0260  r9 : c0df2008  r8 : 00000000
[  234.264087][kernel.0]r7 : cd3e0000  r6 : 00000000  r5 : cd3e0278  r4 : cd3e0000
[  234.264999][kernel.0]r3 : 00000003  r2 : cd3e0280  r1 : 00000000  r0 : cd3e0000
[  234.265910][kernel.0]Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[  234.266896][kernel.0]Control: 10c53c7d  Table: 8c40c059  DAC: 00000015
[  234.267711][kernel.0]Process cat (pid: 2752, stack limit = 0xcbd66400)
[  234.268525][kernel.0]Stack: (0xcbd67ba0 to 0xcbd68000)
[  234.269169][kernel.0]7ba0: cd7c3940 c03d8650 0001bfe0 00002ab2 00000000 cbd67c5c cbd67c58 0001bfe0
[  234.270287][kernel.0]7bc0: cd3e0000 00002ab2 0001bfe0 00000014 cbd66000 cd3e0260 00000000 c01d6660
[  234.271403][kernel.0]7be0: 00002ab2 00000000 c82a5800 ffffffff cd3e0298 cd3e0278 00000000 cd3e0000
[  234.272520][kernel.0]7c00: 00000000 00000000 cd3e0260 c01dc300 00002ab2 00000000 60000013 d663affa
[  234.273639][kernel.0]7c20: cd3e01f0 cd3e01f0 60000013 c09397ec 00000000 cd3e0278 00002ab2 00000000
[  234.274755][kernel.0]7c40: cd3e0000 c01dbf48 00000014 00000003 00000160 00000015 00000004 d663affa
[  234.275874][kernel.0]7c60: ccdaa978 cd3e0278 cd3e0000 cf32a5f4 ccdaa820 00000044 cbd66000 cd3e0260
[  234.276992][kernel.0]7c80: 00000003 c01cec84 ccdaa8dc cbd67cc4 cbd67ec0 00000010 ccdaa978 00000000
[  234.278108][kernel.0]7ca0: 0000015e ccdaa8dc 00000000 00000000 cf32a5d0 00000000 0000015f ccdaa8dc
[  234.279228][kernel.0]7cc0: 00000000 c8488300 0009e5a4 0000000e cbd66000 0000015e cf32a5f4 c0113c04
[  234.280346][kernel.0]7ce0: 0000009f 0000003c c00098c4 ffffffff 00001000 00000000 000000ad 00000010
[  234.281463][kernel.0]7d00: 00000038 cd68f580 00000150 c8488360 00000000 cbd67d30 cbd67d70 0000000e
[  234.282579][kernel.0]7d20: 00000010 00000000 c0951874 c0112a9c cf379b60 cf379b84 cf379890 cf3798b4
[  234.283699][kernel.0]7d40: cf379578 cf37959c cf379380 cf3793a4 cf3790b0 cf3790d4 cf378fd8 cf378ffc
[  234.284814][kernel.0]7d60: cf378f48 cf378f6c cf32a5f4 cf32a5d0 00000000 00001000 00000018 00000000
[  234.285932][kernel.0]7d80: 00001000 c0050da4 00000000 00001000 cec04c00 00000000 00001000 c0e11328
[  234.287049][kernel.0]7da0: 00000000 00001000 cbd66000 00000000 00001000 c0012a60 00000000 00001000
[  234.288166][kernel.0]7dc0: cbd67dd4 00000000 00001000 80000013 00000000 00001000 cd68f580 00000000
[  234.289285][kernel.0]7de0: 00001000 c915d600 00000000 00001000 cbd67e48 00000000 00001000 00000018
[  234.290402][kernel.0]7e00: 00000000 00001000 00000000 00000000 00001000 c915d768 c915d768 c0113550
[  234.291522][kernel.0]7e20: cd68f580 cbd67e48 cd68f580 cb6713c0 00010000 000ac5a4 00000000 001fc5a4
[  234.292637][kernel.0]7e40: 00000000 c8488300 cbd67ec0 00eb0000 cd68f580 c0113ee4 00000000 cbd67ec0
[  234.293754][kernel.0]7e60: cd68f580 c8488300 cbd67ec0 00eb0000 cd68f580 00150000 c8488300 00eb0000
[  234.294874][kernel.0]7e80: 00010000 c0112fd0 00000000 cbd67ec0 cd68f580 00150000 00000000 cd68f580
[  234.295991][kernel.0]7ea0: cbd67ef0 c011308c 00000000 00000002 cd768850 00010000 00000000 c01133fc
[  234.297110][kernel.0]7ec0: 00150000 00000000 cbd67f50 00000000 00000000 cb6713c0 01000000 cbd67f48
[  234.298226][kernel.0]7ee0: cbd67f50 c8488300 00000000 c0113204 00010000 01000000 00000000 cb6713c0
[  234.299342][kernel.0]7f00: 00150000 00000000 cbd67f50 00000000 00000000 00000000 00000000 00000000
[  234.300462][kernel.0]7f20: cbd67f50 01000000 01000000 cb6713c0 c8488300 c00ebba8 01000000 00000000
[  234.301577][kernel.0]7f40: c8488300 cb6713c0 00000000 00000000 00000000 00000000 ccdaa820 00000000
[  234.302697][kernel.0]7f60: 00000000 01000000 00000003 00000001 cbd66000 00000000 00000001 c00ec678
[  234.303813][kernel.0]7f80: 00000000 00000200 00000000 01000000 01000000 00000000 00000000 000000ef
[  234.304933][kernel.0]7fa0: c000e904 c000e780 01000000 00000000 00000001 00000003 00000000 01000000
[  234.306049][kernel.0]7fc0: 01000000 00000000 00000000 000000ef 00000001 00000003 01000000 00000001
[  234.307165][kernel.0]7fe0: 00000000 beafb78c 0000ad08 00128d1c 60000010 00000001 00000000 00000000
[  234.308292][kernel.0][<c01d98fc>] (validate_data_node) from [<c01dc300>] (ubifs_tnc_bulk_read+0x388/0x3ec)
[  234.309493][kernel.0][<c01dc300>] (ubifs_tnc_bulk_read) from [<c01cec84>] (ubifs_readpage+0x1dc/0x46c)
[  234.310656][kernel.0][<c01cec84>] (ubifs_readpage) from [<c0113c04>] (__generic_file_splice_read+0x29c/0x4cc)
[  234.311890][kernel.0][<c0113c04>] (__generic_file_splice_read) from [<c0113ee4>] (generic_file_splice_read+0xb0/0xf4)
[  234.313214][kernel.0][<c0113ee4>] (generic_file_splice_read) from [<c0112fd0>] (do_splice_to+0x68/0x7c)
[  234.314386][kernel.0][<c0112fd0>] (do_splice_to) from [<c011308c>] (splice_direct_to_actor+0xa8/0x190)
[  234.315544][kernel.0][<c011308c>] (splice_direct_to_actor) from [<c0113204>] (do_splice_direct+0x90/0xb8)
[  234.316741][kernel.0][<c0113204>] (do_splice_direct) from [<c00ebba8>] (do_sendfile+0x17c/0x2b8)
[  234.317838][kernel.0][<c00ebba8>] (do_sendfile) from [<c00ec678>] (SyS_sendfile64+0xc4/0xcc)
[  234.318890][kernel.0][<c00ec678>] (SyS_sendfile64) from [<c000e780>] (ret_fast_syscall+0x0/0x38)
[  234.319983][kernel.0]Code: e92d47f0 e24dd050 e59f9228 e1a04000 (e5d18014)

Signed-off-by: karam.lee <karam.lee@lge.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:50:40 +02:00
Richard Weinberger df71b09145 ubifs: Fail commit if TNC is obviously inconsistent
A reference to LEB 0 or with length 0 in the TNC
is never correct and could be caused by a memory corruption.
Don't write such a bad index node to the MTD.
Instead fail the commit which will turn UBIFS into read-only mode.

This is less painful than having the bad reference on the MTD
from where UBFIS has no chance to recover.

Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:49:07 +02:00
Rabin Vincent 319c104274 ubifs: allow userspace to map mounts to volumes
There currently appears to be no way for userspace to find out the
underlying volume number for a mounted ubifs file system, since ubifs
uses anonymous block devices.  The volume name is present in
/proc/mounts but UBI volumes can be renamed after the volume has been
mounted.

To remedy this, show the UBI number and UBI volume number as part of the
options visible under /proc/mounts.

Also, accept and ignore the ubi= vol= options if they are used mounting
(patch from Richard Weinberger).

 # mount -t ubifs ubi:baz x
 # mount
 ubi:baz on /root/x type ubifs (rw,relatime,ubi=0,vol=2)
 # ubirename /dev/ubi0 baz bazz
 # mount
 ubi:baz on /root/x type ubifs (rw,relatime,ubi=0,vol=2)
 # ubinfo -d 0 -n 2
 Volume ID:   2 (on ubi0)
 Type:        dynamic
 Alignment:   1
 Size:        67 LEBs (1063424 bytes, 1.0 MiB)
 State:       OK
 Name:        bazz
 Character device major/minor: 254:3

Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:49:07 +02:00
Richard Weinberger a02a6eba99 ubifs: Wire-up statx() support
statx() can report what flags a file has, expose flags that UBIFS
supports. Especially STATX_ATTR_COMPRESSED and STATX_ATTR_ENCRYPTED
can be interesting for userspace.

Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:49:07 +02:00
Richard Weinberger d2eb85226f ubifs: Remove dead code from ubifs_get_link()
We check the length already, no need to check later
again for an empty string.

Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:49:07 +02:00
Richard Weinberger 35ee314c84 ubifs: Massage debug prints wrt. fscrypt
If file names are encrypted we can no longer print them.
That's why we have to change these prints or remove them completely.

Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:49:07 +02:00
Richard Weinberger 8b2900c017 ubifs: Add assert to dent_key_init()
...to make sure that we don't use it for double hashed lookups
instead of dent_key_init_hash().

Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:49:06 +02:00
Richard Weinberger 781f675e2d ubifs: Fix unlink code wrt. double hash lookups
When removing an encrypted file with a long name and without having
the key we have to be able to locate and remove the directory entry
via a double hash. This corner case was simply forgotten.

Fixes: 528e3d178f ("ubifs: Add full hash lookup support")
Reported-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:49:06 +02:00
David Oberhollenzer 59a74990f8 ubifs: Fix data node size for truncating uncompressed nodes
Currently, the function truncate_data_node only updates the
destination data node size if compression is used. For
uncompressed nodes, the old length is incorrectly retained.

This patch makes sure that the length is correctly set when
compression is disabled.

Fixes: 7799953b34 ("ubifs: Implement encrypt/decrypt for all IO")
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:49:06 +02:00
David Gstir f34e87f58d ubifs: Don't encrypt special files on creation
When a new inode is created, we check if the containing folder has a encryption
policy set and inherit that. This should however only be done for regular
files, links and subdirectories. Not for sockes fifos etc.

Fixes: d475a50745 ("ubifs: Add skeleton for fscrypto")
Cc: stable@vger.kernel.org
Signed-off-by: David Gstir <david@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:49:05 +02:00
Hyunchul Lee bb50c63244 ubifs: Fix memory leak in RENAME_WHITEOUT error path in do_rename
in RENAME_WHITEOUT error path, fscrypt_name should be freed.

Signed-off-by: Hyunchul Lee <cheol.lee@lge.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:49:05 +02:00
Hyunchul Lee 4d35ca4f77 ubifs: Fix inode data budget in ubifs_mknod
Assign inode data budget to budget request correctly.

Signed-off-by: Hyunchul Lee <cheol.lee@lge.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:49:05 +02:00
Richard Weinberger 272eda8298 ubifs: Correctly evict xattr inodes
UBIFS handles extended attributes just like files, as consequence of
that, they also have inodes.
Therefore UBIFS does all the inode machinery also for xattrs. Since new
inodes have i_nlink of 1, a file or xattr inode will be evicted
if i_nlink goes down to 0 after an unlink. UBIFS assumes this model also
for xattrs, which is not correct.
One can create a file "foo" with xattr "user.test". By reading
"user.test" an inode will be created, and by deleting "user.test" it
will get evicted later. The assumption breaks if the file "foo", which
hosts the xattrs, will be removed. VFS nor UBIFS does not remove each
xattr via ubifs_xattr_remove(), it just removes the host inode from
the TNC and all underlying xattr nodes too and the inode will remain
in the cache and wastes memory.

To solve this problem, remove xattr inodes from the VFS inode cache in
ubifs_xattr_remove() to make sure that they get evicted.

Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Cc: <stable@vger.kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:49:04 +02:00
Richard Weinberger e996bfd428 ubifs: Unexport ubifs_inode_slab
This SLAB is only being used in super.c, there is no need to expose
it into the global namespace.

Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:48:43 +02:00
Eric Biggers af65936a7a ubifs: don't bother checking for encryption key in ->mmap()
Since only an open file can be mmap'ed, and we only allow open()ing an
encrypted file when its key is available, there is no need to check for
the key again before permitting each mmap().

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-05 23:52:50 +02:00
Eric Biggers 4afb9996a2 ubifs: require key for truncate(2) of encrypted file
Currently, filesystems allow truncate(2) on an encrypted file without
the encryption key.  However, it's impossible to correctly handle the
case where the size being truncated to is not a multiple of the
filesystem block size, because that would require decrypting the final
block, zeroing the part beyond i_size, then encrypting the block.

As other modifications to encrypted file contents are prohibited without
the key, just prohibit truncate(2) as well, making it fail with ENOKEY.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-05 23:52:50 +02:00
Linus Torvalds b53c4d5eb7 This pull request contains updates for both UBI and UBIFS:
- New config option CONFIG_UBIFS_FS_SECURITY
 - Minor improvements
 - Random fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJZFuwKAAoJEEtJtSqsAOnWYrUP/0/y7PEh0ZGdi4kkQy/CnuJr
 pmybsQ0TbLoljahuDXqShKkMNvuXIvKSKcHROIsXreG+DCfC3v/srZlvRt7UCPOE
 QVvjh0sQTaMUrfcaTTM9g3Im/BZX9MueTaSF2Rgx1lF+R2t3InW1bv9hvmQxfoEA
 N75tJgH69mii5pDWuGgLLjmmxhbSkMGpM31QeO5DUaLRqdXcc5L5iK5Hnd+Wtj81
 oSB5RsergCfk17jaWH2e7G03LB2tm6AhM5oksTOpZ9+OIW9GOiUMfjYFC2ZYRwzx
 zHhnh0rGPfFv0jO5u4CXtWaQDfxyw6Z7XLK+Xo1RemkhM/7AQl2xetfIVDXErgoA
 NxxN/a8MWcEpJ2x6y/Z8740HXjyQjt9h3nHzlVPNP8hz68J796E7UzRjCQtf7Iyh
 xqhfjMabxfBqcLkTESvgmjcuwo1IkqOaFBjIw2Cd2nfBEkCKzoaINjRHitgUGj/z
 Mm1CJNWvaK6QTdZ3iCETCyPQI02A+4ZXhDf/QZS3wRAMc1v45pS/dVeBn+0F8Nrc
 ASiQwcd7u1IfJa3A6d6DgMECUWBXjc1GGMfMyhS/ta56pOfe1RyR3bg9WuISqUMe
 86id9tiSs7cP2UVFTrFFFWAO3rATj+9cOO9f2LTujPzcd88cJhKSykaLPmELfyE9
 YUPw9lpExwyXLn7S46LQ
 =9ZJe
 -----END PGP SIGNATURE-----

Merge tag 'upstream-4.12-rc1' of git://git.infradead.org/linux-ubifs

Pull UBI/UBIFS updates from Richard Weinberger:

 - new config option CONFIG_UBIFS_FS_SECURITY

 - minor improvements

 - random fixes

* tag 'upstream-4.12-rc1' of git://git.infradead.org/linux-ubifs:
  ubi: Add debugfs file for tracking PEB state
  ubifs: Fix a typo in comment of ioctl2ubifs & ubifs2ioctl
  ubifs: Remove unnecessary assignment
  ubifs: Fix cut and paste error on sb type comparisons
  ubi: fastmap: Fix slab corruption
  ubifs: Add CONFIG_UBIFS_FS_SECURITY to disable/enable security labels
  ubi: Make mtd parameter readable
  ubi: Fix section mismatch
2017-05-13 10:23:12 -07:00
Linus Torvalds bf5f89463f Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:

 - the rest of MM

 - various misc things

 - procfs updates

 - lib/ updates

 - checkpatch updates

 - kdump/kexec updates

 - add kvmalloc helpers, use them

 - time helper updates for Y2038 issues. We're almost ready to remove
   current_fs_time() but that awaits a btrfs merge.

 - add tracepoints to DAX

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits)
  drivers/staging/ccree/ssi_hash.c: fix build with gcc-4.4.4
  selftests/vm: add a test for virtual address range mapping
  dax: add tracepoint to dax_insert_mapping()
  dax: add tracepoint to dax_writeback_one()
  dax: add tracepoints to dax_writeback_mapping_range()
  dax: add tracepoints to dax_load_hole()
  dax: add tracepoints to dax_pfn_mkwrite()
  dax: add tracepoints to dax_iomap_pte_fault()
  mtd: nand: nandsim: convert to memalloc_noreclaim_*()
  treewide: convert PF_MEMALLOC manipulations to new helpers
  mm: introduce memalloc_noreclaim_{save,restore}
  mm: prevent potential recursive reclaim due to clearing PF_MEMALLOC
  mm/huge_memory.c: deposit a pgtable for DAX PMD faults when required
  mm/huge_memory.c: use zap_deposited_table() more
  time: delete CURRENT_TIME_SEC and CURRENT_TIME
  gfs2: replace CURRENT_TIME with current_time
  apparmorfs: replace CURRENT_TIME with current_time()
  lustre: replace CURRENT_TIME macro
  fs: ubifs: replace CURRENT_TIME_SEC with current_time
  fs: ufs: use ktime_get_real_ts64() for birthtime
  ...
2017-05-08 18:17:56 -07:00
Deepa Dinamani 607a11ad94 fs: ubifs: replace CURRENT_TIME_SEC with current_time
CURRENT_TIME_SEC is not y2038 safe.  current_time() will be transitioned
to use 64 bit time along with vfs in a separate patch.  There is no plan
to transition CURRENT_TIME_SEC to use y2038 safe time interfaces.

current_time() returns timestamps according to the granularities set in
the inode's super_block.  The granularity check to call
current_fs_time() or CURRENT_TIME_SEC is not required.

Use current_time() directly to update inode timestamp.  Use
timespec_trunc during file system creation, before the first inode is
created.

Link: http://lkml.kernel.org/r/1491613030-11599-9-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Weinberger <richard@nod.at>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 17:15:15 -07:00
Rock Lee 798868c021 ubifs: Fix a typo in comment of ioctl2ubifs & ubifs2ioctl
Change 'convert' to 'converts'
Change 'UBIFS' to 'UBIFS inode flags'

Signed-off-by: Rock Lee <rockdotlee@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-05-08 20:48:55 +02:00
Stefan Agner 2a068daf57 ubifs: Remove unnecessary assignment
Assigning a value of a variable to itself is not useful.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-05-08 20:48:47 +02:00
Colin Ian King 6a258f7d0f ubifs: Fix cut and paste error on sb type comparisons
The check for the bad node type of sb->type is checking sa->type
and not sb-type. This looks like a cut and paste error. Fix this.

Detected by PVS-Studio, warning: V581

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-05-08 20:48:41 +02:00
Hyunchul Lee 8326c1eec2 ubifs: Add CONFIG_UBIFS_FS_SECURITY to disable/enable security labels
When write syscall is called, every time security label is searched to
determine that file's privileges should be changed.
If LSM(Linux Security Model) is not used, this is useless.

So introduce CONFIG_UBIFS_SECURITY to disable security labels. it's default
value is "y".

Signed-off-by: Hyunchul Lee <cheol.lee@lge.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-05-08 20:48:23 +02:00
Linus Torvalds 677375cef8 Only bug fixes and cleanups for this merge window.
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlkPYHkACgkQ8vlZVpUN
 gaM97ggAlOm8n/tlbcdonX/+HHjlnqcy5uYD7A9AH/JordpRzy4eqcMbxMG39p1R
 DBtjo9Y0i3iFEGajRc0h7KXDLeTBUQ/JZpR8H60MFfAQHnTowuI91eb3/6QeZiHh
 CN/2KKzpYitPIEUfEHnVeYKOfvrzR7je5hrEiAwEkPeKv7XyrNVM0LHQ/jKpbQwg
 ntIzHvxjQyo8plx/m5S4Yew7tqjYpNiq4plmyk/Vxtw2FmB/FC76UxYeadoB3EI5
 etw+bCORB0tFZO27o56kXywg+mDcp7HEtVvq9LG28oEuBDAVKNoeKEvV7SiOBlZp
 +HnqIz5Hx1UTxOlTAc10IjvEhriEuw==
 =qCDl
 -----END PGP SIGNATURE-----

Merge tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt

Pull fscrypt updates from Ted Ts'o:
 "Only bug fixes and cleanups for this merge window"

* tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
  fscrypt: correct collision claim for digested names
  MAINTAINERS: fscrypt: update mailing list, patchwork, and git
  ext4: clean up ext4_match() and callers
  f2fs: switch to using fscrypt_match_name()
  ext4: switch to using fscrypt_match_name()
  fscrypt: introduce helper function for filename matching
  fscrypt: avoid collisions when presenting long encrypted filenames
  f2fs: check entire encrypted bigname when finding a dentry
  ubifs: check for consistent encryption contexts in ubifs_lookup()
  f2fs: sync f2fs_lookup() with ext4_lookup()
  ext4: remove "nokey" check from ext4_lookup()
  fscrypt: fix context consistency check when key(s) unavailable
  fscrypt: Remove __packed from fscrypt_policy
  fscrypt: Move key structure and constants to uapi
  fscrypt: remove fscrypt_symlink_data_len()
  fscrypt: remove unnecessary checks for NULL operations
2017-05-08 11:40:34 -07:00
Eric Biggers 413d5a9edb ubifs: check for consistent encryption contexts in ubifs_lookup()
As ext4 and f2fs do, ubifs should check for consistent encryption
contexts during ->lookup() in an encrypted directory.  This protects
certain users of filesystem encryption against certain types of offline
attacks.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-05-04 11:44:35 -04:00
Linus Torvalds 694752922b Merge branch 'for-4.12/block' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:

 - Add BFQ IO scheduler under the new blk-mq scheduling framework. BFQ
   was initially a fork of CFQ, but subsequently changed to implement
   fairness based on B-WF2Q+, a modified variant of WF2Q. BFQ is meant
   to be used on desktop type single drives, providing good fairness.
   From Paolo.

 - Add Kyber IO scheduler. This is a full multiqueue aware scheduler,
   using a scalable token based algorithm that throttles IO based on
   live completion IO stats, similary to blk-wbt. From Omar.

 - A series from Jan, moving users to separately allocated backing
   devices. This continues the work of separating backing device life
   times, solving various problems with hot removal.

 - A series of updates for lightnvm, mostly from Javier. Includes a
   'pblk' target that exposes an open channel SSD as a physical block
   device.

 - A series of fixes and improvements for nbd from Josef.

 - A series from Omar, removing queue sharing between devices on mostly
   legacy drivers. This helps us clean up other bits, if we know that a
   queue only has a single device backing. This has been overdue for
   more than a decade.

 - Fixes for the blk-stats, and improvements to unify the stats and user
   windows. This both improves blk-wbt, and enables other users to
   register a need to receive IO stats for a device. From Omar.

 - blk-throttle improvements from Shaohua. This provides a scalable
   framework for implementing scalable priotization - particularly for
   blk-mq, but applicable to any type of block device. The interface is
   marked experimental for now.

 - Bucketized IO stats for IO polling from Stephen Bates. This improves
   efficiency of polled workloads in the presence of mixed block size
   IO.

 - A few fixes for opal, from Scott.

 - A few pulls for NVMe, including a lot of fixes for NVMe-over-fabrics.
   From a variety of folks, mostly Sagi and James Smart.

 - A series from Bart, improving our exposed info and capabilities from
   the blk-mq debugfs support.

 - A series from Christoph, cleaning up how handle WRITE_ZEROES.

 - A series from Christoph, cleaning up the block layer handling of how
   we track errors in a request. On top of being a nice cleanup, it also
   shrinks the size of struct request a bit.

 - Removal of mg_disk and hd (sorry Linus) by Christoph. The former was
   never used by platforms, and the latter has outlived it's usefulness.

 - Various little bug fixes and cleanups from a wide variety of folks.

* 'for-4.12/block' of git://git.kernel.dk/linux-block: (329 commits)
  block: hide badblocks attribute by default
  blk-mq: unify hctx delay_work and run_work
  block: add kblock_mod_delayed_work_on()
  blk-mq: unify hctx delayed_run_work and run_work
  nbd: fix use after free on module unload
  MAINTAINERS: bfq: Add Paolo as maintainer for the BFQ I/O scheduler
  blk-mq-sched: alloate reserved tags out of normal pool
  mtip32xx: use runtime tag to initialize command header
  scsi: Implement blk_mq_ops.show_rq()
  blk-mq: Add blk_mq_ops.show_rq()
  blk-mq: Show operation, cmd_flags and rq_flags names
  blk-mq: Make blk_flags_show() callers append a newline character
  blk-mq: Move the "state" debugfs attribute one level down
  blk-mq: Unregister debugfs attributes earlier
  blk-mq: Only unregister hctxs for which registration succeeded
  blk-mq-debugfs: Rename functions for registering and unregistering the mq directory
  blk-mq: Let blk_mq_debugfs_register() look up the queue name
  blk-mq: Register <dev>/queue/mq after having registered <dev>/queue
  ide-pm: always pass 0 error to ide_complete_rq in ide_do_devset
  ide-pm: always pass 0 error to __blk_end_request_all
  ..
2017-05-01 10:39:57 -07:00
Jan Kara 99edd4580b ubifs: Convert to separately allocated bdi
Allocate struct backing_dev_info separately instead of embedding it
inside the superblock. This unifies handling of bdi among users.

CC: Richard Weinberger <richard@nod.at>
CC: Artem Bityutskiy <dedekind1@gmail.com>
CC: Adrian Hunter <adrian.hunter@intel.com>
CC: linux-mtd@lists.infradead.org
Acked-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20 12:09:55 -06:00
Richard Weinberger 32fe905c17 ubifs: Fix O_TMPFILE corner case in ubifs_link()
It is perfectly fine to link a tmpfile back using linkat().
Since tmpfiles are created with a link count of 0 they appear
on the orphan list, upon re-linking the inode has to be removed
from the orphan list again.

Ralph faced a filesystem corruption in combination with overlayfs
due to this bug.

Cc: <stable@vger.kernel.org>
Cc: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Reported-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Tested-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Reported-by: Amir Goldstein <amir73il@gmail.com>
Fixes: 474b93704f ("ubifs: Implement O_TMPFILE")
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-04-18 23:18:02 +02:00
Felix Fietkau c3d9fda688 ubifs: Fix RENAME_WHITEOUT support
Remove faulty leftover check in do_rename(), apparently introduced in a
merge that combined whiteout support changes with commit f03b8ad8d3
("fs: support RENAME_NOREPLACE for local filesystems")

Fixes: f03b8ad8d3 ("fs: support RENAME_NOREPLACE for local
filesystems")
Fixes: 9e0a1fff8d ("ubifs: Implement RENAME_WHITEOUT")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-03-30 09:28:02 +02:00
Hyunchul Lee 33fda9fa9f ubifs: Fix debug messages for an invalid filename in ubifs_dump_inode
instead of filenames, print inode numbers, file types, and length.

Signed-off-by: Hyunchul Lee <cheol.lee@lge.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-03-30 09:27:53 +02:00
Hyunchul Lee e328379a18 ubifs: Fix debug messages for an invalid filename in ubifs_dump_node
if a character is not printable, print '?' instead of that.

Signed-off-by: Hyunchul Lee <cheol.lee@lge.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-03-30 09:27:47 +02:00
Hyunchul Lee b20e2d9999 ubifs: Remove filename from debug messages in ubifs_readdir
if filename is encrypted, filename could have no printable characters.
so remove it.

Signed-off-by: Hyunchul Lee <cheol.lee@lge.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-03-30 09:27:28 +02:00
Richard Weinberger 63ed657362 ubifs: Fix memory leak in error path in ubifs_mknod
When fscrypt_setup_filename() fails we have to free dev.

Signed-off-by: Richard Weinberger <richard@nod.at>
2017-03-30 09:27:27 +02:00
David Howells a528d35e8b statx: Add a system call to make enhanced file info available
Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.

The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode.  This change is propagated to the vfs_getattr*()
function.

Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.

========
OVERVIEW
========

The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.

A number of requests were gathered for features to be included.  The
following have been included:

 (1) Make the fields a consistent size on all arches and make them large.

 (2) Spare space, request flags and information flags are provided for
     future expansion.

 (3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
     __s64).

 (4) Creation time: The SMB protocol carries the creation time, which could
     be exported by Samba, which will in turn help CIFS make use of
     FS-Cache as that can be used for coherency data (stx_btime).

     This is also specified in NFSv4 as a recommended attribute and could
     be exported by NFSD [Steve French].

 (5) Lightweight stat: Ask for just those details of interest, and allow a
     netfs (such as NFS) to approximate anything not of interest, possibly
     without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
     Dilger] (AT_STATX_DONT_SYNC).

 (6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
     its cached attributes are up to date [Trond Myklebust]
     (AT_STATX_FORCE_SYNC).

And the following have been left out for future extension:

 (7) Data version number: Could be used by userspace NFS servers [Aneesh
     Kumar].

     Can also be used to modify fill_post_wcc() in NFSD which retrieves
     i_version directly, but has just called vfs_getattr().  It could get
     it from the kstat struct if it used vfs_xgetattr() instead.

     (There's disagreement on the exact semantics of a single field, since
     not all filesystems do this the same way).

 (8) BSD stat compatibility: Including more fields from the BSD stat such
     as creation time (st_btime) and inode generation number (st_gen)
     [Jeremy Allison, Bernd Schubert].

 (9) Inode generation number: Useful for FUSE and userspace NFS servers
     [Bernd Schubert].

     (This was asked for but later deemed unnecessary with the
     open-by-handle capability available and caused disagreement as to
     whether it's a security hole or not).

(10) Extra coherency data may be useful in making backups [Andreas Dilger].

     (No particular data were offered, but things like last backup
     timestamp, the data version number and the DOS archive bit would come
     into this category).

(11) Allow the filesystem to indicate what it can/cannot provide: A
     filesystem can now say it doesn't support a standard stat feature if
     that isn't available, so if, for instance, inode numbers or UIDs don't
     exist or are fabricated locally...

     (This requires a separate system call - I have an fsinfo() call idea
     for this).

(12) Store a 16-byte volume ID in the superblock that can be returned in
     struct xstat [Steve French].

     (Deferred to fsinfo).

(13) Include granularity fields in the time data to indicate the
     granularity of each of the times (NFSv4 time_delta) [Steve French].

     (Deferred to fsinfo).

(14) FS_IOC_GETFLAGS value.  These could be translated to BSD's st_flags.
     Note that the Linux IOC flags are a mess and filesystems such as Ext4
     define flags that aren't in linux/fs.h, so translation in the kernel
     may be a necessity (or, possibly, we provide the filesystem type too).

     (Some attributes are made available in stx_attributes, but the general
     feeling was that the IOC flags were to ext[234]-specific and shouldn't
     be exposed through statx this way).

(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
     Michael Kerrisk].

     (Deferred, probably to fsinfo.  Finding out if there's an ACL or
     seclabal might require extra filesystem operations).

(16) Femtosecond-resolution timestamps [Dave Chinner].

     (A __reserved field has been left in the statx_timestamp struct for
     this - if there proves to be a need).

(17) A set multiple attributes syscall to go with this.

===============
NEW SYSTEM CALL
===============

The new system call is:

	int ret = statx(int dfd,
			const char *filename,
			unsigned int flags,
			unsigned int mask,
			struct statx *buffer);

The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat().  There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags.  There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.

Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):

 (1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
     respect.

 (2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
     its attributes with the server - which might require data writeback to
     occur to get the timestamps correct.

 (3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
     network filesystem.  The resulting values should be considered
     approximate.

mask is a bitmask indicating the fields in struct statx that are of
interest to the caller.  The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat().  It should be noted that asking for
more information may entail extra I/O operations.

buffer points to the destination for the data.  This must be 256 bytes in
size.

======================
MAIN ATTRIBUTES RECORD
======================

The following structures are defined in which to return the main attribute
set:

	struct statx_timestamp {
		__s64	tv_sec;
		__s32	tv_nsec;
		__s32	__reserved;
	};

	struct statx {
		__u32	stx_mask;
		__u32	stx_blksize;
		__u64	stx_attributes;
		__u32	stx_nlink;
		__u32	stx_uid;
		__u32	stx_gid;
		__u16	stx_mode;
		__u16	__spare0[1];
		__u64	stx_ino;
		__u64	stx_size;
		__u64	stx_blocks;
		__u64	__spare1[1];
		struct statx_timestamp	stx_atime;
		struct statx_timestamp	stx_btime;
		struct statx_timestamp	stx_ctime;
		struct statx_timestamp	stx_mtime;
		__u32	stx_rdev_major;
		__u32	stx_rdev_minor;
		__u32	stx_dev_major;
		__u32	stx_dev_minor;
		__u64	__spare2[14];
	};

The defined bits in request_mask and stx_mask are:

	STATX_TYPE		Want/got stx_mode & S_IFMT
	STATX_MODE		Want/got stx_mode & ~S_IFMT
	STATX_NLINK		Want/got stx_nlink
	STATX_UID		Want/got stx_uid
	STATX_GID		Want/got stx_gid
	STATX_ATIME		Want/got stx_atime{,_ns}
	STATX_MTIME		Want/got stx_mtime{,_ns}
	STATX_CTIME		Want/got stx_ctime{,_ns}
	STATX_INO		Want/got stx_ino
	STATX_SIZE		Want/got stx_size
	STATX_BLOCKS		Want/got stx_blocks
	STATX_BASIC_STATS	[The stuff in the normal stat struct]
	STATX_BTIME		Want/got stx_btime{,_ns}
	STATX_ALL		[All currently available stuff]

stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.

Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution.  Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.

The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does.  The following
attributes map to FS_*_FL flags and are the same numerical value:

	STATX_ATTR_COMPRESSED		File is compressed by the fs
	STATX_ATTR_IMMUTABLE		File is marked immutable
	STATX_ATTR_APPEND		File is append-only
	STATX_ATTR_NODUMP		File is not to be dumped
	STATX_ATTR_ENCRYPTED		File requires key to decrypt in fs

Within the kernel, the supported flags are listed by:

	KSTAT_ATTR_FS_IOC_FLAGS

[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]

New flags include:

	STATX_ATTR_AUTOMOUNT		Object is an automount trigger

These are for the use of GUI tools that might want to mark files specially,
depending on what they are.

Fields in struct statx come in a number of classes:

 (0) stx_dev_*, stx_blksize.

     These are local system information and are always available.

 (1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
     stx_size, stx_blocks.

     These will be returned whether the caller asks for them or not.  The
     corresponding bits in stx_mask will be set to indicate whether they
     actually have valid values.

     If the caller didn't ask for them, then they may be approximated.  For
     example, NFS won't waste any time updating them from the server,
     unless as a byproduct of updating something requested.

     If the values don't actually exist for the underlying object (such as
     UID or GID on a DOS file), then the bit won't be set in the stx_mask,
     even if the caller asked for the value.  In such a case, the returned
     value will be a fabrication.

     Note that there are instances where the type might not be valid, for
     instance Windows reparse points.

 (2) stx_rdev_*.

     This will be set only if stx_mode indicates we're looking at a
     blockdev or a chardev, otherwise will be 0.

 (3) stx_btime.

     Similar to (1), except this will be set to 0 if it doesn't exist.

=======
TESTING
=======

The following test program can be used to test the statx system call:

	samples/statx/test-statx.c

Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.

Here's some example output.  Firstly, an NFS directory that crosses to
another FSID.  Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.

	[root@andromeda ~]# /tmp/test-statx -A /warthog/data
	statx(/warthog/data) = 0
	results=7ff
	  Size: 4096            Blocks: 8          IO Block: 1048576  directory
	Device: 00:26           Inode: 1703937     Links: 125
	Access: (3777/drwxrwxrwx)  Uid:     0   Gid:  4041
	Access: 2016-11-24 09:02:12.219699527+0000
	Modify: 2016-11-17 10:44:36.225653653+0000
	Change: 2016-11-17 10:44:36.225653653+0000
	Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)

Secondly, the result of automounting on that directory.

	[root@andromeda ~]# /tmp/test-statx /warthog/data
	statx(/warthog/data) = 0
	results=7ff
	  Size: 4096            Blocks: 8          IO Block: 1048576  directory
	Device: 00:27           Inode: 2           Links: 125
	Access: (3777/drwxrwxrwx)  Uid:     0   Gid:  4041
	Access: 2016-11-24 09:02:12.219699527+0000
	Modify: 2016-11-17 10:44:36.225653653+0000
	Change: 2016-11-17 10:44:36.225653653+0000

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-02 20:51:15 -05:00
Dave Jiang 11bac80004 mm, fs: reduce fault, page_mkwrite, and pfn_mkwrite to take only vmf
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.

Remove the vma parameter to simplify things.

[arnd@arndb.de: fix ARM build]
  Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 17:46:54 -08:00
Linus Torvalds 6c24337f22 Various cleanups for the file system encryption feature.
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlirP6wACgkQ8vlZVpUN
 gaMwpQgApR67CxzlstxYjZpWPAqC8McJ2FBDX+mCOle5Vkc1WQDklwr0oCfQThTj
 eDSFRhNfIvyPh0DJ589PxBCsWOqN5h6Si7hD5ZinomVNI+IL89OytaU5EV2OpWaW
 iKdJgO9Tm8U7LuY6FOIoVdX57kUXVdkWoj61rC056B1SNhnNiVeofi7lYDM8Ix4q
 IGSQ9W24iQKmCk4hCwgObhJBRK9RnlOH0GLUmpMaS+jnfnj/uePwdxWEFsPuCOob
 8acAJ49lr55kjIw79E0BAyWxhEZ2aiArHk8PaWynT/DyNq3ftcapPlpftoeba8vo
 glBJRX70QxPvt0iHEp0ykfExkhWhFA==
 =Joki
 -----END PGP SIGNATURE-----

Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt

Pull fscrypt updates from Ted Ts'o:
 "Various cleanups for the file system encryption feature"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
  fscrypt: constify struct fscrypt_operations
  fscrypt: properly declare on-stack completion
  fscrypt: split supp and notsupp declarations into their own headers
  fscrypt: remove redundant assignment of res
  fscrypt: make fscrypt_operations.key_prefix a string
  fscrypt: remove unused 'mode' member of fscrypt_ctx
  ext4: don't allow encrypted operations without keys
  fscrypt: make test_dummy_encryption require a keyring key
  fscrypt: factor out bio specific functions
  fscrypt: pass up error codes from ->get_context()
  fscrypt: remove user-triggerable warning messages
  fscrypt: use EEXIST when file already uses different policy
  fscrypt: use ENOTDIR when setting encryption policy on nondirectory
  fscrypt: use ENOKEY when file cannot be created w/o key
2017-02-20 18:22:31 -08:00
Eric Biggers 6f69f0ed61 fscrypt: constify struct fscrypt_operations
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Richard Weinberger <richard@nod.at>
2017-02-08 10:59:57 -05:00
Eric Biggers 46f47e4800 fscrypt: split supp and notsupp declarations into their own headers
Previously, each filesystem configured without encryption support would
define all the public fscrypt functions to their notsupp_* stubs.  This
list of #defines had to be updated in every filesystem whenever a change
was made to the public fscrypt functions.  To make things more
maintainable now that we have three filesystems using fscrypt, split the
old header fscrypto.h into several new headers.  fscrypt_supp.h contains
the real declarations and is included by filesystems when configured
with encryption support, whereas fscrypt_notsupp.h contains the inline
stubs and is included by filesystems when configured without encryption
support.  fscrypt_common.h contains common declarations needed by both.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-02-06 23:26:43 -05:00
Richard Weinberger 1cb51a15b5 ubifs: Fix journal replay wrt. xattr nodes
When replaying the journal it can happen that a journal entry points to
a garbage collected node.
This is the case when a power-cut occurred between a garbage collect run
and a commit. In such a case nodes have to be read using the failable
read functions to detect whether the found node matches what we expect.

One corner case was forgotten, when the journal contains an entry to
remove an inode all xattrs have to be removed too. UBIFS models xattr
like directory entries, so the TNC code iterates over
all xattrs of the inode and removes them too. This code re-uses the
functions for walking directories and calls ubifs_tnc_next_ent().
ubifs_tnc_next_ent() expects to be used only after the journal and
aborts when a node does not match the expected result. This behavior can
render an UBIFS volume unmountable after a power-cut when xattrs are
used.

Fix this issue by using failable read functions in ubifs_tnc_next_ent()
too when replaying the journal.
Cc: stable@vger.kernel.org
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Reported-by: Rock Lee <rockdotlee@gmail.com>
Reviewed-by: David Gstir <david@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-01-17 14:35:58 +01:00
Eric Biggers 3d4b2fcbc9 ubifs: remove redundant checks for encryption key
In several places, ubifs checked for an encryption key before creating a
file in an encrypted directory.  This was redundant with
fscrypt_setup_filename() or ubifs_new_inode(), and in the case of
ubifs_link() it broke linking to special files.  So remove the extra
checks.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-01-17 14:34:21 +01:00
Eric Biggers a75467d910 ubifs: allow encryption ioctls in compat mode
The ubifs encryption ioctls did not work when called by a 32-bit program
on a 64-bit kernel.  Since 'struct fscrypt_policy' is not affected by
the word size, ubifs just needs to allow these ioctls through, like what
ext4 and f2fs do.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-01-17 14:33:41 +01:00
Arnd Bergmann 404e0b6331 ubifs: add CONFIG_BLOCK dependency for encryption
This came up during the v4.10 merge window:

warning: (UBIFS_FS_ENCRYPTION) selects FS_ENCRYPTION which has unmet direct dependencies (BLOCK)
fs/crypto/crypto.c: In function 'fscrypt_zeroout_range':
fs/crypto/crypto.c:355:9: error: implicit declaration of function 'bio_alloc';did you mean 'd_alloc'? [-Werror=implicit-function-declaration]
   bio = bio_alloc(GFP_NOWAIT, 1);

The easiest way out is to limit UBIFS_FS_ENCRYPTION to configurations
that also enable BLOCK.

Fixes: d475a50745 ("ubifs: Add skeleton for fscrypto")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-01-17 14:32:47 +01:00