Commit Graph

632 Commits

Author SHA1 Message Date
Prarit Bhargava 1d2450a4a6 [PATCH] PCI Hotplug: SGI hotplug driver fixes
These fixes were suggested by pcihpd-discuss, but were dropped in the
initial checkin of the code.  These fixes include cleaning up the
hotplug driver sysfs filename, and some minor code cleanups.  The driver
also requires at least PROM 4.30, not 4.20.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:25 -07:00
Kristen Accardi 1248d63612 [PATCH] PCI Hotplug: use bus_slot number for name
For systems with multiple hotplug controllers, you need to use more than
just the slot number to uniquely name the slot.  Without a unique slot
name, the pci_hp_register() will fail.  This patch adds the bus number
to the name.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:24 -07:00
John Rose 56d8456b06 [PATCH] PCI Hotplug: rpaphp: Purify hotplug
Currently rpaphp registers the following bus types as hotplug slots:
1) Actual PCI Hotplug slots
2) Embedded/Internal PCI slots
3) PCI Host Bridges

The second and third bus types are not actually direct parents of
removable adapters.  As such, the rpaphp has special case code to fake
results for attributes like power, adapter status, etc.  This patch
removes types 2 and 3 from the rpaphp module.

This patch also changes the DLPAR module so that slots can be
DLPAR-added/removed without having been designated as hotplug-capable.

Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:23 -07:00
John Rose 940903c5a5 [PATCH] PCI Hotplug: rpaphp: Export slot enable
This patch exports rpaphp_config_pci_adapter() for use by the rpadlpar
module.  It also changes this function by removing any dependencies on
struct slot.  The patch also changes the RPA DLPAR-add path to enable
newly-added slots in a separate step from that which registers them as
hotplug slots.

Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:23 -07:00
John Rose 0945cd5f90 [PATCH] PCI Hotplug: rpaphp: Remove rpaphp_find_pci
The rpaphp module currently uses a fragile method to find a pci device
by its device node.  This function is unnecessary, so this patch scraps
it.

Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:23 -07:00
John Rose 9c209c919d [PATCH] PCI Hotplug: rpaphp: Change slot pci reference
The slot structure in the rpaphp module currently references the PCI
contents of the slot using the PCI device of the parent bridge.  This
is unnecessary, since the module is actually interested in the
subordinate bus of the bridge.  The dependency on a PCI bridge device
also prohibits the module from registering hotplug slots that have a
root bridge as a parent, since root bridges on PPC64 don't have PCI
devices.

This patch changes struct slot to reference the PCI subsystem using a
pci_bus rather than a pci_dev.

Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:22 -07:00
John Rose 5eeb8c63a3 [PATCH] PCI Hotplug: rpaphp: Move VIO registration
Currently, rpaphp registers Virtual I/O slots as hotplug slots.  The
only purpose of this registration is to ensure that the VIO subsystem
is notified of new VIO buses during DLPAR adds.  Similarly, rpaphp
notifies the VIO subsystem when a VIO bus is DLPAR-removed.  The rpaphp
module has special case code to fake results for attributes like power,
adapter status, etc.

The VIO register/unregister functions could just as easily be made from
the DLPAR module.  This patch moves the VIO registration calls to the
DLPAR module, and removes the VIO fluff from rpaphp altogether.

Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:22 -07:00
John Rose bde1684124 [PATCH] PCI Hotplug: rpaphp: Remove unused stuff
Subject line says it all :)

Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:22 -07:00
Len Brown 76f5858482 [ACPI] delete CONFIG_ACPI_BUS
it is a synonym for CONFIG_ACPI

Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-24 12:11:34 -04:00
Kristen Accardi 8cf4c19523 [PATCH] PCI Hotplug: new contact info
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-16 21:06:24 -07:00
Prarit Bhargava 6f354b014b [IA64] hotplug/ia64: SN Hotplug Driver - SN Hotplug Driver code
This patch is the SGI hotplug driver and additional changes required for
the driver.  These modifications include changes to the SN io_init.c code
for memory management, the inclusion of new SAL calls to enable and disable
PCI slots, and a hotplug-style driver.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 15:29:53 -07:00
Keith Moore 4002307d2b [PATCH] cpqphp: fix oops during unload without probe
drivers/pci/hotplug/cpqphp_core.c calls cpqphp_event_start_thread()
in one_time_init(), which is called whenever the hardware is probed.
Unfortunately, cpqphp_event_stop_thread() is *always* called when
the module is unloaded. If the hardware is never probed, then
cpqphp_event_stop_thread() tries to manipulate a couple of
uninitialized mutexes.

Signed-off-by: Keith Moore <keithmo@exmsft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:46 -07:00
Kenji Kaneshige a0d399a808 [PATCH] ACPI based I/O APIC hot-plug: acpiphp support
This patch adds PCI based I/O xAPIC hot-add support to ACPIPHP
driver. When PCI root bridge is hot-added, all PCI based I/O xAPICs
under the root bridge are hot-added by this patch. Hot-remove support
is TBD.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:45 -07:00
Rajesh Shah 8d50e332c8 [PATCH] acpi hotplug: decouple slot power state changes from physical hotplug
Current acpiphp code does not distinguish between the physical presence and
power state of a device/slot.  That is, if a device has to be disabled, it
also tries to physically ejects the device.  This patch decouples power state
from physical presence.  You can now echo to the corresponding sysfs power
control file to repeatedly enable and disable a device without having to
physically re-insert it.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:43 -07:00
Rajesh Shah 8e7561cfbd [PATCH] acpi hotplug: aCPI based root bridge hot-add
acpiphp changes to support acpi based root bridge hot-add.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:43 -07:00
Rajesh Shah 2f523b1590 [PATCH] acpi hotplug: fix slot power-down problem with acpiphp
Earlier I reported that Matthew's acpiphp rewrite had problem in powering down
slot on my i386 system.  The following patch is needed to get the acpiphp
rewrite properly powering down the slot.

Signed-off-by: Dely Sy <dely.l.sy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:43 -07:00
Rajesh Shah 364d5094a4 [PATCH] acpi hotplug: clean up notify handlers on acpiphp unload
A root bridge may not have directly attached hotpluggable slots under it.
Instead, it may have p2p bridges with slots under it.  In this case, we need
to clean up the p2p bridges and slots properly too.  Patch below applies on
top of the original patch, and fixes this problem.  Without this, acpiphp
leaves behind notify handlers on module unload, and subsequent module load
attempts don't work properly too.  Patch was tested on an ia64 Tiger4 box.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:42 -07:00
Rajesh Shah 42f49a6ae5 [PATCH] acpi hotplug: convert acpiphp to use generic resource code
This patch converts acpiphp to use the generic PCI resource assignment code.
It's quite large, but most of it is deleting the acpiphp_pci and acpiphp_res
files.  It's tested on an hp Integrity rx8620 (which won't work without this
patch).  Testers with other hardware welcomed.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:42 -07:00
Yani Ioannou e404e274f6 [PATCH] Driver Core: drivers/i2c/chips/w83781d.c - drivers/s390/block/dcssblk.c: update device attribute callbacks
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:34 -07:00
Dmitry Torokhov fc7e482899 [PATCH] sysfs: (driver/pci) if show/store is missing return -EIO
sysfs: fix drivers/pci so if an attribute does not implement
       show or store method read/write will return -EIO
       instead of 0.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:02 -07:00
Scott Murray 03e49d40ea [PATCH] PCI Hotplug: fix CPCI reference counting bug
Here's a patch that fixes up the pci_dev refcounting in the CPCI code.
I've done some testing against it and it seems fine here.

Signed-off-by: Scott Murray <scottm@somanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-09 01:37:59 -07:00
Scott Murray bcc488ab02 [PATCH] PCI Hotplug: more CPCI updates
Here is my third attempt at a patch to further update the CompactPCI
hotplug driver infrastructure to address the pci_enable_device issue
discussed on the list as well as a few other issues I discovered during
some more testing.  This version addresses a few more issues pointed out
by Prarit Bhargava.  Changes include:
- cpci_enable_device and its recursive calling of pci_enable_device on
  new devices removed.
- Use list_rwsem to avoid slot status change races between disable_slot
  and check_slots.
- Fixed oopsing in cpci_hp_unregister_bus caused by calling list_del on
  a slot after calling pci_hp_deregister.
- Removed kfree calls in cleanup_slots since release_slot will have
  done it already.
- Reworked init_slots a bit to fix latch and adapter file updating on
  subsequent calls to cpci_hp_start.
- Improved sanity checking in cpci_hp_register_controller.
- Now shut things down correctly in cpci_hotplug_exit.
- Switch to pci_get_slot instead of deprecated pci_find_slot.
- A bunch of CodingStyle fixes.

Signed-off-by: Scott Murray <scottm@somanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-31 14:26:38 -07:00
Kenji Kaneshige 2ac2610b26 [PATCH] PCI Hotplug: SHPCHP driver doesn't enable PERR and SERR properly
Current shpchp driver doesn't seem to program command register to
enable PERR and SERR properly. The following patch fixes this issue.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-31 14:26:37 -07:00
Kenji Kaneshige 7a8cb869f3 [PATCH] PCI Hotplug: shpchp driver doesn't program _HPP values properly
Current shpchp driver doesn't seem to program _HPP values
properly. The following patch fixes this issue.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-31 14:26:37 -07:00
Scott Murray 43b7d7cfb1 [PATCH] PCI Hotplug: CPCI update
[PATCH] CPCI: update

I have finally done some work to update the CompactPCI hotplug driver to
fix some of the outstanding issues in 2.6:
- Added adapter and latch status ops so that those files will get created
  by the current PCI hotplug core.  This used to not be required, but
  seems to be now after some of the sysfs rework in the core.
- Replaced slot list spinlock with a r/w semaphore to avoid any potential
  issues with sleeping.  This quiets all of the runtime warnings.
- Reworked interrupt driven hot extraction handling to remove need for a
  polling operator for ENUM# status.  There are a lot of boards that only
  have an interrupt driven by ENUM#, so this lowers the bar to entry.
- Replaced pci_visit_dev usage with better use of the PCI core functions.
  The new code is functionally equivalent to the previous code, but the
  use of pci_enable_device on insert needs to be investigated further, as
  I need to do some more testing to see if it is still necessary.

Signed-off-by: Scott Murray <scottm@somanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17 14:31:11 -07:00
Dely Sy 8b245e45f3 [PATCH] PCI Hotplug: get pciehp to work on the downstream port of a switch
Here is the updated patch to get pciehp driver to work for downstream
port of a switch and handle the difference in the offset value of PCI
Express capability list item of different ports.

Signed-off-by: Dely Sy <dely.l.sy@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17 14:31:11 -07:00
Dely Sy ee17fd93a5 [PATCH] PCI Hotplug: Fix echoing 1 to power file of enabled slot problem with SHPC driver
Here is a patch to fix the problem of echoing 1 to "power" file
to enabled slot causing the slot to power down, and echoing 0
to disabled slot causing shpchp_disabled_slot() to be called
twice. This problem was reported by kenji Kaneshige.

Thanks,
Dely

Signed-off-by: Dely Sy <dely.l.sy@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17 14:31:10 -07:00
Dely Sy b308240b49 [PATCH] PCI Hotplug: fix pciehp regression
I fogot to remove the code that freed the memory in cleanup_slots().
Here is the new patch, which I have also taken care of the comment
by Eike to remove the cast in hotplug_slot->private.

Signed-off-by: Dely Sy <dely.l.sy@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03 23:45:16 -07:00
Steven Cole eaae4b3a84 [PATCH] PCI: Spelling fixes for drivers/pci.
Here are some spelling corrections for drivers/pci.

CONTROLER -> CONTROLLER
Regisetr -> Register
harware -> hardware
inital -> initial
Initilize -> Initialize
funtion -> function
funciton -> function
occured -> occurred

Signed-off-by: Steven Cole <elenstev@mesatop.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03 23:45:16 -07:00
Rolf Eike Beer 034ecc724c [PATCH] PCI Hotplug ibmphp_pci.c: Fix masking out needed information too early
here is the patch that fixes the bug introduced by my previous patch which
already went into 2.6.12-rc2 and is likely to cause trouble is someone hits
one the else case here by accident.

Using the &= operation before the if statement destroys the information the
if asks for so we always go into the else branch.

Signed-off-by: Rolf Eike Beer <eike-hotplug@sf-tec.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03 23:45:15 -07:00
Pavel Machek 7f4927c1b5 [PATCH] fix u32 vs. pm_message_t in PCI, PCIE
This fixes drivers/pci (mostly pcie stuff).

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:25:33 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00