Commit Graph

81 Commits

Author SHA1 Message Date
Linus Torvalds 2323036dfe vm: convert HPET mmap to vm_iomap_memory() helper
This is my example conversion of a few existing mmap users.  The HPET
case is simple, widely available, and easy to test (Clemens Ladisch sent
a trivial test-program for it).

Test-program-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-19 09:46:39 -07:00
Rafael J. Wysocki 51fac8388a ACPI: Remove useless type argument of driver .remove() operation
The second argument of ACPI driver .remove() operation is only used
by the ACPI processor driver and the value passed to that driver
through it is always available from the given struct acpi_device
object's removal_type field.  For this reason, the second ACPI driver
.remove() argument is in fact useless, so drop it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
2013-01-26 00:37:24 +01:00
Chen Gang 2cf4e52e27 drivers/char: for hpet, add count checking, and ~0UL instead of -1
use ~0UL for unsigned long variable initialization, instead of -1.

  add check for hdp->hd_nirqs within 32 (HPET_MAX_TIMERS).
    the type of irqp->interrupt_count is u8.
    the git diff not display the relative lines below.
      hdp->hd_irq[hdp->hd_nirqs] = irq;
      hdp->hd_nirqs++;
    please check source code to get more information.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26 16:16:35 -08:00
Kay Sievers 5da527aafe printk(): add KERN_CONT where needed in hpet and vt code
A prototype for kmsg records instead of a byte-stream buffer revealed
a couple of missing printk(KERN_CONT ...) uses. Subsequent calls produce
one record per printk() call, while all should have ended up in a single
record.

Instead of:
  ACPI: (supports S0 S5)
  ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
  hpet0: at MMIO 0xfed00000, IRQs 2 , 8 , 0

It prints:
  ACPI: (supports S0
   S5
  )
  ACPI: PCI Interrupt Link [LNKA] (IRQs
   5
   *10
   11
  )
  hpet0: at MMIO 0xfed00000, IRQs
   2
  , 8
  , 0

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09 10:30:39 -07:00
David Howells 9ffc93f203 Remove all #inclusions of asm/system.h
Remove all #inclusions of asm/system.h preparatory to splitting and killing
it.  Performed with the following command:

perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`

Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-28 18:30:03 +01:00
Linus Torvalds 8e204874db Merge branch 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-64, vdso: Do not allocate memory for the vDSO
  clocksource: Change __ARCH_HAS_CLOCKSOURCE_DATA to a CONFIG option
  x86, vdso: Drop now wrong comment
  Document the vDSO and add a reference parser
  ia64: Replace clocksource.fsys_mmio with generic arch data
  x86-64: Move vread_tsc and vread_hpet into the vDSO
  clocksource: Replace vread with generic arch data
  x86-64: Add --no-undefined to vDSO build
  x86-64: Allow alternative patching in the vDSO
  x86: Make alternative instruction pointers relative
  x86-64: Improve vsyscall emulation CS and RIP handling
  x86-64: Emulate legacy vsyscalls
  x86-64: Fill unused parts of the vsyscall page with 0xcc
  x86-64: Remove vsyscall number 3 (venosys)
  x86-64: Map the HPET NX
  x86-64: Remove kernel.vsyscall64 sysctl
  x86-64: Give vvars their own page
  x86-64: Document some of entry_64.S
  x86-64: Fix alignment of jiffies variable
2011-07-22 17:05:15 -07:00
Andy Lutomirski 574c44fa8f ia64: Replace clocksource.fsys_mmio with generic arch data
Now that clocksource.archdata is available, use it for ia64-specific
code.

Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: linux-ia64@vger.kernel.org
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andy Lutomirski <luto@mit.edu>
Link: http://lkml.kernel.org/r/d31de0ee0842a0e322fb6441571c2b0adb323fa2.1310563276.git.luto@mit.edu
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-14 17:57:09 -07:00
Nils Carlson 273ef9509b drivers/char/hpet.c: fix periodic-emulation for delayed interrupts
When interrupts are delayed due to interrupt masking or due to other
interrupts being serviced the HPET periodic-emuation would fail.  This
happened because given an interval t and a time for the current interrupt
m we would compute the next time as t + m.  This works until we are
delayed for > t, in which case we would be writing a new value which is in
fact in the past.

This can be solved by computing the next time instead as (k * t) + m where
k is large enough to be in the future.  The exact computation of k is
described in a comment to the code.

More detail:

Assuming an interval of 5 between each expected interrupt we have a normal
case of

t0: interrupt, read t0 from comparator, set next interrupt t0 + 5
t5: interrupt, read t5 from comparator, set next interrupt t5 + 5
t10: interrupt, read t10 from comparator, set next interrupt t10 + 5
...

So, what happens when the interrupt is serviced too late?

t0: interrupt, read t0 from comparator, set next interrupt t0 + 5
t11: delayed interrupt serviced, read t5 from comparator, set next
interrupt t5 + 5, which is in the past!
... counter loops ...
t10: Much much later, get the next interrupt.

This can happen either because we have interrupts masked for too long
(some stupid driver goes on a printk rampage) or just because we are
pushing the limits of the interval (too small a period), or both most
probably.

My solution is to read the main counter as well and set the next interrupt
to occur at the right interval, for example:

t0: interrupt, read t0 from comparator, set next interrupt t0 + 5
t11: delayed interrupt serviced, read t5 from comparator, set next
interrupt t15 as t10 has been missed.
t15: back on track.

Signed-off-by: Nils Carlson <nils.carlson@ericsson.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-15 20:04:02 -07:00
John Stultz d60c304177 ia64: convert to clocksource_register_hz/khz
This converts the ia64 clocksources to use clocksource_register_hz/khz

CC: Tony Luck <tony.luck@intel.com>
CC: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tony Luck <tony.luck@intel.com> [clocksource_itc path]
Signed-off-by: John Stultz <johnstul@us.ibm.com>
2011-02-21 13:33:45 -08:00
Arnd Bergmann 451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Vasiliy Kulikov dae512edc6 drivers/char/hpet.c: fix information leak to userland
Structure info is copied to userland with some padding fields unitialized.
It leads to leaking of stack memory.

[akpm@linux-foundation.org: remove now-unneeded zeroing of info->hi_ireqfreq]
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:11 -07:00
Jaswinder Singh Rajput 0ca01763a0 hpet: fix style problems
Fix the following style problems:

WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
ERROR: code indent should use tabs where possible
ERROR: do not initialise statics to 0 or NULL

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:11 -07:00
Clemens Ladisch 96e9694df4 hpet: fix unwanted interrupt due to stale irq status bit
Jaswinder Singh Rajput wrote:
> By executing Documentation/timers/hpet_example.c
>
> for polling, I requested for 3 iterations but it seems iteration work
> for only 2 as first expired time is always very small.
>
> # ./hpet_example poll /dev/hpet 10 3
> -hpet: executing poll
> hpet_poll: info.hi_flags 0x0
> hpet_poll: expired time = 0x13
> hpet_poll: revents = 0x1
> hpet_poll: data 0x1
> hpet_poll: expired time = 0x1868c
> hpet_poll: revents = 0x1
> hpet_poll: data 0x1
> hpet_poll: expired time = 0x18645
> hpet_poll: revents = 0x1
> hpet_poll: data 0x1

Clearing the HPET interrupt enable bit disables interrupt generation
but does not disable the timer, so the interrupt status bit will still
be set when the timer elapses.  If another interrupt arrives before
the timer has been correctly programmed (due to some other device on
the same interrupt line, or CONFIG_DEBUG_SHIRQ), this results in an
extra unwanted interrupt event because the status bit is likely to be
set from comparator matches that happened before the device was opened.

Therefore, we have to ensure that the interrupt status bit is and
stays cleared until we actually program the timer.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Reported-by: Jaswinder Singh Rajput <jaswinderlinux@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Bob Picco <bpicco@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:11 -07:00
Jiri Slaby a56d531871 hpet: unmap unused I/O space
When the initialization code in hpet finds a memory resource and does not
find an IRQ, it does not unmap the memory resource previously mapped.

There are buggy BIOSes which report resources exactly like this and what
is worse the memory region bases point to normal RAM.  This normally would
not matter since the space is not touched.  But when PAT is turned on,
ioremap causes the page to be uncached and sets this bit in page->flags.

Then when the page is about to be used by the allocator, it is reported
as:

BUG: Bad page state in process md5sum  pfn:3ed00
page:ffffea0000dbd800 count:0 mapcount:0 mapping:(null) index:0x0
page flags: 0x20000001000000(uncached)
Pid: 7956, comm: md5sum Not tainted 2.6.34-12-desktop #1
Call Trace:
 [<ffffffff810df851>] bad_page+0xb1/0x100
 [<ffffffff810dfa45>] prep_new_page+0x1a5/0x1c0
 [<ffffffff810dfe01>] get_page_from_freelist+0x3a1/0x640
 [<ffffffff810e01af>] __alloc_pages_nodemask+0x10f/0x6b0
...

In this particular case:

1) HPET returns 3ed00000 as memory region base, but it is not in
reserved ranges reported by the BIOS (excerpt):
 BIOS-e820: 0000000000100000 - 00000000af6cf000 (usable)
 BIOS-e820: 00000000af6cf000 - 00000000afdcf000 (reserved)

2) there is no IRQ resource reported by HPET method. On the other
hand, the Intel HPET specs (1.0a) says (3.2.5.1):
_CRS (
  // Report 1K of memory consumed by this Timer Block
  memory range consumed
  // Optional: only used if BIOS allocates Interrupts [1]
  IRQs consumed
)

[1] For case where Timer Block is configured to consume IRQ0/IRQ8 AND
Legacy 8254/Legacy RTC hardware still exists, the device objects
associated with 8254 & RTC devices should not report IRQ0/IRQ8 as
"consumed resources".

So in theory we should check whether if it is the case and use those
interrupts instead.

Anyway the address reported by the BIOS here is bogus, so non-presence
of IRQ doesn't mean the "optional" part in point 2).

Since I got no reply previously, fix this by simply unmapping the space
when IRQ is not found and memory region was mapped previously.  It would
be probably more safe to walk the resources again and unmap appropriately
depending on type.  But as we now use only ioremap for both 2 memory
resource types, it is not necessarily needed right now.

Addresses https://bugzilla.novell.com/show_bug.cgi?id=629908

Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:11 -07:00
Arnd Bergmann 54066a57c5 hpet: kill BKL, add compat_ioctl
hpet uses the big kernel lock in its ioctl and open
functions. Replace this with a private mutex to be
sure. Since we're already touching the ioctl function,
add the compat_ioctl version as well -- all commands
except HPET_INFO are compatible and that one is easy
to add.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: Bob Picco <bob.picco@hp.com>
2010-09-15 21:01:40 +02:00
Arnd Bergmann 55929332c9 drivers: Push down BKL into various drivers
These are the last remaining device drivers using
the ->ioctl file operation in the drivers directory
(except from v4l drivers).

[fweisbec: drop i8k pushdown as it has been done from
procfs pushdown branch already]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-05-17 05:27:41 +02:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Akinobu Mita e5d6151115 hpet: use for_each_set_bit()
Replace open-coded loop with for_each_set_bit().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-17 18:43:47 -07:00
Eric W. Biederman 6d4561110a sysctl: Drop & in front of every proc_handler.
For consistency drop & in front of every proc_handler.  Explicity
taking the address is unnecessary and it prevents optimizations
like stubbing the proc_handlers to NULL.

Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-18 08:37:40 -08:00
Eric W. Biederman 894d249115 sysctl drivers: Remove dead binary sysctl support
Now that sys_sysctl is a wrapper around /proc/sys all of
the binary sysctl support elsewhere in the tree is
dead code.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Corey Minyard <minyard@acm.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Neil Brown <neilb@suse.de>
Cc: "James E.J. Bottomley" <James.Bottomley@suse.de>
Acked-by: Clemens Ladisch <clemens@ladisch.de> for drivers/char/hpet.c
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-12 02:04:58 -08:00
Nils Carlson ae21cf9248 hpet: hpet driver periodic timer setup bug fixes
The periodic interrupt from drivers/char/hpet.c does not work correctly,
both when using the periodic capability of the hardware and while
emulating the periodic interrupt (when hardware does not support periodic
mode).

With timers capable of periodic interrupts, the comparator field is first
set with the period value followed by set of hidden accumulator, which has
the side effect of overwriting the comparator value.  This results in
wrong periodicity for the interrupts.  For, periodic interrupts to work,
following steps are necessary, in that order.

* Set config with Tn_VAL_SET_CNF bit

* Write to hidden accumulator, the value written is the time when the
  first interrupt should be generated

* Write compartor with period interval for subsequent interrupts
  (http://www.intel.com/hardwaredesign/hpetspec_1.pdf )

When emulating periodic timer with timers not capable of periodic
interrupt, driver is adding the period to counter value instead of
comparator value, which causes slow drift when using this emulation.

Also, driver seems to add hpetp->hp_delta both while setting up periodic
interrupt and while emulating periodic interrupts with timers not capable
of doing periodic interrupts.  This hp_delta will result in slower than
expected interrupt rate and should not be used while setting the interval.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Nils Carlson <nils.carlson@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 07:21:03 -07:00
Yinghai Lu a2f809b08a irq: change ACPI GSI APIs to also take a device argument
We want to use dev_to_node() later on, to be aware of the 'home node'
of the GSI in question.

[ Impact: cleanup, prepare the IRQ code to be more NUMA aware ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Len Brown <lenb@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Len Brown <lenb@kernel.org>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
LKML-Reference: <49F65560.20904@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:21:17 +02:00
Magnus Damm 8e19608e8b clocksource: pass clocksource to read() callback
Pass clocksource pointer to the read() callback for clocksources.  This
allows us to share the callback between multiple instances.

[hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods]
[akpm@linux-foundation.org: cleanup]
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-21 13:41:47 -07:00
Yasunori Goto 303d379c54 hpet: fix the possibility of insane return value of hpet_calibrate() against SMI
hpet_calibrate() has a possibility of miss-calibration due to SMI.  If SMI
interrupts in the while loop of calibration, then return value will be
big.  This change calibrates until stabilizing by the return value with a
small value.

[akpm@linux-foundation.org: trivial style tweaks]
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Acked-by: Vojtech Pavlik <vojtech@suse.cz>
Cc: Robert Picco <Robert.Picco@hp.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:01 -07:00
Denis V. Lunev e45f2c0774 x86: correct link to HPET timer specification
Impact: update documentation / help text

Original link is dead.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 10:05:12 +01:00
Al Viro 233e70f422 saner FASYNC handling on file close
As it is, all instances of ->release() for files that have ->fasync()
need to remember to evict file from fasync lists; forgetting that
creates a hole and we actually have a bunch that *does* forget.

So let's keep our lives simple - let __fput() check FASYNC in
file->f_flags and call ->fasync() there if it's been set.  And lose that
crap in ->release() instances - leaving it there is still valid, but we
don't have to bother anymore.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-01 09:49:46 -07:00
Yinghai Lu 1f45f5621d drivers/char: use nr_irqs
convert them to nr_irqs.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:52:05 +02:00
David John f26ed116c0 HPET: Remove spurious HPET busy warning message.
On x86 systems with CONFIG_HPET_TIMER enabled, when
the HPET driver (drivers/char/hpet.c) is loaded,
an incorrect busy message is printed when the driver
initializes since the HPET has already been allocated
by the core timer code. Remove the warning message.

Signed-off-by: David John <davidjon@xenontk.org>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-10 09:25:43 +02:00
David Brownell f92a789d25 hpet: /dev/hpet - fixes and cleanup, fix
fix:

On Thursday 31 July 2008, Ingo Molnar wrote:
>   drivers/built-in.o: In function `hpet_alloc':
>   : undefined reference to `__udivdi3'
>   drivers/built-in.o: In function `hpet_alloc':
>   : undefined reference to `__umoddi3'

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-31 22:49:58 +02:00
David Brownell 64a76f667d hpet: /dev/hpet - fixes and cleanup
Minor /dev/hpet updates and bugfixes:

  * Remove dead code, mostly remnants of an incomplete/unusable
    kernel interface ... noted when addressing "sparse" warnings:
      + hpet_unregister() and a routine it calls
      + hpet_task and all references, including hpet_task_lock
      + hpet_data.hd_flags (and HPET_DATA_PLATFORM)

  * Correct and improve boot message:
      + displays *counter* (shared between comparators) bit width,
        not *timer* bit widths (which are often mixed)
      + relabel "timers" as "comparators"; this is less confusing,
        they are not independent like normal timers are (sigh)
      + display MHz not Hz; it's never less than 10 MHz.

  * Tighten and correct the userspace interface code
      + don't accidentally program comparators in 64-bit mode using
        32-bit values ... always force comparators into 32-bit mode
      + provide the correct bit definition flagging comparators with
        periodic capability ... the ABI is unchanged

  * Update Documentation/hpet.txt
      + be more correct and current
      + expand description a bit
      + don't mention that now-gone kernel interface

Plus, add a FIXME comment for something that could cause big trouble
on systems with more capable HPETs than at least Intel seems to ship.

It seems that few folk use this userspace interface; it's not very
usable given the general lack of HPET IRQ routing.  I'm told that
the only real point of it any more is to mmap for fast timestamps;
IMO that's handled better through the gettimeofday() vsyscall.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-31 18:45:41 +02:00
Ingo Molnar 85e9ca333d Merge branch 'linus' into timers/hpet 2008-07-31 18:43:41 +02:00
Adrian Bunk 372572e9b1 #if 0 hpet_unregister()
This patch #if 0's the unused hpet_unregister().

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:43 -07:00
Arnd Bergmann 48b8188051 hpet: BKL pushdown
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2008-06-20 14:05:57 -06:00
Kevin Hao 70ef6d595b x86: get irq for hpet timer
HPET timer's IRQ is 0 by default. So we have to select which irq
will be used by these timers. We wait to set the timer's irq until
we really open it in order to reduce the chance of conflicting with
other device.

Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-02 11:35:12 +02:00
Harvey Harrison bf9d892952 drivers/char: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:54 -07:00
Thomas Gleixner 5761d64b27 x86: revert assign IRQs to hpet timer
The commits:

commit 37a47db8d7
Author: Balaji Rao <balajirrao@gmail.com>
Date:   Wed Jan 30 13:30:03 2008 +0100

    x86: assign IRQs to HPET timers, fix

and

commit e3f37a54f6
Author: Balaji Rao <balajirrao@gmail.com>
Date:   Wed Jan 30 13:30:03 2008 +0100

    x86: assign IRQs to HPET timers

have been identified to cause a regression on some platforms due to
the assignement of legacy IRQs which makes the legacy devices
connected to those IRQs disfunctional.

Revert them.

This fixes http://bugzilla.kernel.org/show_bug.cgi?id=10382

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-04 18:36:49 +02:00
Thomas Gleixner 02456c708e x86: nuke a ton of dead hpet code
No users, just ballast

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:30:27 +01:00
Balaji Rao 37a47db8d7 x86: assign IRQs to HPET timers, fix
Looks like IRQ 31 is assigned to timer 3, even without the patch!
I wonder who wrote the number 31. But the manual says that it is
zero by default.

I think we should check whether the timer has been allocated an IRQ before
proceeding to assign one to it.  Here is a patch that does this.

Signed-off-by: Balaji Rao <balajirrao@gmail.com>
Tested-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:03 +01:00
Balaji Rao e3f37a54f6 x86: assign IRQs to HPET timers
The userspace API for the HPET (see Documentation/hpet.txt) did not work. The
HPET_IE_ON ioctl was failing as there was no IRQ assigned to the timer
device. This patch fixes it by allocating IRQs to timer blocks in the HPET.

arch/x86/kernel/hpet.c |   13 +++++--------
drivers/char/hpet.c    |   45 ++++++++++++++++++++++++++++++++++++++-------
include/linux/hpet.h   |    2 +-
3 files changed, 44 insertions(+), 16 deletions(-)

Signed-off-by: Balaji Rao <balajirrao@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:03 +01:00
S.Çağlar Onur 3dffec45c2 Silent drivers/char/hpet.c build warnings on i386
Following patch silents;

...
drivers/char/hpet.c:72: warning: 'clocksource_hpet' defined but not used
drivers/char/hpet.c:81: warning: 'hpet_clocksource' defined but not used
...

build warnings on i386, they appeared after commit 3b2b64fd31

Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
--
 drivers/char/hpet.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)
2007-09-26 09:22:04 -07:00
Zhao Yakui 78e1ca49c7 ACPI: hpet: ACPI Error (utglobal-0126): Unknown exception code: 0xFFFFFFF0
If hpet has been initialized before registering hpet driver, the callback
function of hpet_resources will return the status code of -EBUSY, which is
not defined in the ACPI exception table.  So when ACPI checks the status
code of callback function, it will report the unknown exception code.

So the status code in ACPI is used instead of the generic error code in the
ACPI callback function of hpet_resources.
For example: -EBUSY is replaced by AE_ALREADY_EXISTS
	     -EINVAL is replaced by AE_NO_MEMORY

http://bugzilla.kernel.org/show_bug.cgi?id=8630

Signed-off-by: Zhao Yakui  <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-09-25 17:59:00 -04:00
Linus Torvalds 3b2b64fd31 Do not use the ia64 clocksource on non-ia64 architectures
The HPET clocksource in drivers/char/hpet.c was written as generic code
for ia64, but it is not yet ready to replace the native HPET clocksource
implementations that the i386/x86-64 architectures use.

On x86[-64], trying to register this clocksource results in potentially
multiple hpet-based clocksources being registered, and if the ia64 one
is chosen on x86_64 some users have experienced hangs.

Eventually all three architectures may end up using the same code, but
that is not the case right now.

Cc: John Stultz <johnstul@us.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Paolo Ornati <ornati@fastwebnet.it>
Cc: Bob Picco <bob.picco@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-31 20:14:22 -07:00
Al Viro 712aaa1cb1 use CLOCKSOURCE_MASK() instead of too large constant
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:11:57 -07:00
Thomas Renninger 1ba90e3a87 ACPI: autoload modules - Create __mod_acpi_device_table symbol for all ACPI drivers
modpost is going to use these to create e.g. acpi:ACPI0001
in modules.alias.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-23 13:56:42 -04:00
Tony Luck 0aa366f351 [IA64] Convert to generic timekeeping/clocksource
This is a merge of Peter Keilty's initial patch (which was
revived by Bob Picco) for this with Hidetoshi Seto's fixes
and scaling improvements.

Acked-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-07-20 11:22:30 -07:00
Eric W. Biederman 0b4d414714 [PATCH] sysctl: remove insert_at_head from register_sysctl
The semantic effect of insert_at_head is that it would allow new registered
sysctl entries to override existing sysctl entries of the same name.  Which is
pain for caching and the proc interface never implemented.

I have done an audit and discovered that none of the current users of
register_sysctl care as (excpet for directories) they do not register
duplicate sysctl entries.

So this patch simply removes the support for overriding existing entries in
the sys_sysctl interface since no one uses it or cares and it makes future
enhancments harder.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Corey Minyard <minyard@acm.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: David Chinner <dgc@sgi.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:59 -08:00
Eric W. Biederman 22943364cf [PATCH] sysctl: remove sys_sysctl support from the hpet timer driver
In the binary sysctl interface the hpet driver was claiming to be the cdrom
driver.  This is a no-no so remove support for the binary interface.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:57 -08:00
Al Viro f23f6e08c4 [PATCH] severing poll.h -> mm.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-12-04 02:00:36 -05:00
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Andi Kleen 3034d11c93 [PATCH] Don't print virtual address in HPET initialization
virtual addresses don't belong into kernel logs for non debugging

Cc: clemens@ladisch.de
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:28 +02:00