Add Mellanox copyright to the iser initiator source code which I maintain.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Change the code to destroy the "last opened" rdma_cm id after making
sure we released all other objects (QP, CQs, PD, etc) associated with
the IB device.
Since iser accesses the IB device using the rdma_cm id, we need to
free any objects that are related to the device that is associated
with the rdma_cm id prior to destroying that id. When this isn't
done, the low level driver that created this device can be unloaded
before iser has a chance to free all the objects and a such a call may
invoke code segment which isn't valid any more and crash.
Cc: Sean Hefty <sean.hefty@intel.com
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Given that srpt_release_channel_work() calls target_wait_for_sess_cmds()
to allow outstanding se_cmd_t->cmd_kref a change to complete, the call
to perform target_sess_cmd_list_set_waiting() needs to happen in
srpt_shutdown_session()
Also, this patch adds an explicit call to srpt_shutdown_session() within
srpt_drain_channel() so that target_sess_cmd_list_set_waiting() will be
called in the cases where TFO->shutdown_session() is not triggered
directly by TCM.
Cc: Joern Engel <joern@logfs.org>
Cc: Roland Dreier <roland@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Drop unused transport_wait_for_tasks() check in target_wait_for_sess_cmds
shutdown code, and convert tcm_qla2xxx + ib_srpt fabric drivers.
Cc: Joern Engel <joern@logfs.org>
Cc: Roland Dreier <roland@kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
- XRC transport fixes
- Fix DHCP on IPoIB
- mlx4 preparations for flow steering
- iSER fixes
- miscellaneous other fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABCAAGBQJRisChAAoJEENa44ZhAt0hHLoP/iX5MxtHJ3X1u5KcARX/7nci
CCH/VnD172re/KavCCg7zkbZQpS4jHCtW/CzLUCSPqBGOaj78HFTUkB3ragvUW7m
ndERwplF8DP/i0x7Kk7Wau2a4RdlH0lqwucOjqTyQnbIdxknkz6w3Jcsb9Ic2lzx
up0T0HaHtTxdVF6lXOB5QOIpUGg3l0Yu4euX2BA61WDoZj+VIYhgeWZewq0iV0D1
rLtarJ+Or7mdwu2rNcDHgrD0lhF4SCBd3rx4lbc4F68Cr8JUz0Xe7liPLNskeLhW
f3NEm3gmkYp9YI1otGsA0X/CyV6wnRk4mT8JMlOb2WNzeq2V13Z54/9ZyF5/gFD2
JgzkQB9Ibf7EmTwXWd6+0+FA40Q6dNvnRnhddRM255dvDVw7nxUr2UzYH4Re/Z9K
rNFjkvix2YUwEmoPjitWocz2kj2reDMqjtiVDmdGy1YbtnicH5GtkQsWkoPg8ON9
m5jORUdzydTD+yBJwTiFP1EuFoG3TdfoZ7zHMJwWy/u8i308xD6WPGms9MTdjh8j
7gjz2TCKr+vpuVRh/p6esCPPOTSsSeWDeowy7Sgpdf3qoqAImXsWXVrl2kXLhtyl
1VIgHU3ztm7oqwmy0gQ/zVCo4CLLdsif2zmEIDpxJPnWaSq+D9LJdyLTcfdBjhQ8
9SjUafe4msT1pIjNb7ND
=1ojD
-----END PGP SIGNATURE-----
Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
Pull InfiniBand/RDMA changes from Roland Dreier:
- XRC transport fixes
- Fix DHCP on IPoIB
- mlx4 preparations for flow steering
- iSER fixes
- miscellaneous other fixes
* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (23 commits)
IB/iser: Add support for iser CM REQ additional info
IB/iser: Return error to upper layers on EAGAIN registration failures
IB/iser: Move informational messages from error to info level
IB/iser: Add module version
mlx4_core: Expose a few helpers to fill DMFS HW strucutures
mlx4_core: Directly expose fields of DMFS HW rule control segment
mlx4_core: Change a few DMFS fields names to match firmare spec
mlx4: Match DMFS promiscuous field names to firmware spec
mlx4_core: Move DMFS HW structs to common header file
IB/mlx4: Set link type for RAW PACKET QPs in the QP context
IB/mlx4: Disable VLAN stripping for RAW PACKET QPs
mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level
RDMA/iwcm: Don't touch cmid after dropping reference
IB/qib: Correct qib_verbs_register_sysfs() error handling
IB/ipath: Correct ipath_verbs_register_sysfs() error handling
RDMA/cxgb4: Fix SQ allocation when on-chip SQ is disabled
SRPT: Fix odd use of WARN_ON()
IPoIB: Fix ipoib_hard_header() return value
RDMA: Rename random32() to prandom_u32()
RDMA/cxgb3: Fix uninitialized variable
...
Use preferable function name which implies using a pseudo-random number
generator.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Annex A12 of the IBTA spec defines additional information that needs
to be provided through the CM exchange relating to usage of ZBVA (Zero
Based VAs) and Send With Invalidate over an iSER connection.
Currently, the initiator sets both to not supported, but does provide
the header so that existing iSER targets can be patched to start
looking on the private data carried by the CM.
This is a preparation step to enable iSER with HW drivers for which
FMRs are not supported, such as mlx4 VF instances or new HW devices
which might support only FRWR (Fast Registration Work-Requests) along
the details of the IB_DEVICE_MEM_MGT_EXTENSIONS device capability.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Commit 819a087316 ("IB/iser: Avoid error prints on EAGAIN
registration failures") not only eliminated the error print on that
case, but rather also modified the code such that it doesn't return
any error to upper layers. As a result a wrong mapping was used. Fix
this to correctly return the error in that case.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Introduce iser_info() and move informational messages that were
printed as errors to use that macro. Also, cleanup printk leftovers to
use the existing macros.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
[ Use pr_warn(... instead of printk(KERN_WARNING .... - Roland ]
Signed-off-by: Roland Dreier <roland@purestorage.com>
Add displaying module version, update the version to 1.1,
and remove the DRV_DATE define.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Pull networking updates from David Miller:
"Highlights (1721 non-merge commits, this has to be a record of some
sort):
1) Add 'random' mode to team driver, from Jiri Pirko and Eric
Dumazet.
2) Make it so that any driver that supports configuration of multiple
MAC addresses can provide the forwarding database add and del
calls by providing a default implementation and hooking that up if
the driver doesn't have an explicit set of handlers. From Vlad
Yasevich.
3) Support GSO segmentation over tunnels and other encapsulating
devices such as VXLAN, from Pravin B Shelar.
4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton.
5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita
Dukkipati.
6) In the PHY layer, allow supporting wake-on-lan in situations where
the PHY registers have to be written for it to be configured.
Use it to support wake-on-lan in mv643xx_eth.
From Michael Stapelberg.
7) Significantly improve firewire IPV6 support, from YOSHIFUJI
Hideaki.
8) Allow multiple packets to be sent in a single transmission using
network coding in batman-adv, from Martin Hundebøll.
9) Add support for T5 cxgb4 chips, from Santosh Rastapur.
10) Generalize the VXLAN forwarding tables so that there is more
flexibility in configurating various aspects of the endpoints.
From David Stevens.
11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver,
from Dmitry Kravkov.
12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo
Neira Ayuso.
13) Start adding networking selftests.
14) In situations of overload on the same AF_PACKET fanout socket, or
per-cpu packet receive queue, minimize drop by distributing the
load to other cpus/fanouts. From Willem de Bruijn and Eric
Dumazet.
15) Add support for new payload offset BPF instruction, from Daniel
Borkmann.
16) Convert several drivers over to mdoule_platform_driver(), from
Sachin Kamat.
17) Provide a minimal BPF JIT image disassembler userspace tool, from
Daniel Borkmann.
18) Rewrite F-RTO implementation in TCP to match the final
specification of it in RFC4138 and RFC5682. From Yuchung Cheng.
19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear
you like netlink, so I implemented netlink dumping of netlink
sockets.") From Andrey Vagin.
20) Remove ugly passing of rtnetlink attributes into rtnl_doit
functions, from Thomas Graf.
21) Allow userspace to be able to see if a configuration change occurs
in the middle of an address or device list dump, from Nicolas
Dichtel.
22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes
Frederic Sowa.
23) Increase accuracy of packet length used by packet scheduler, from
Jason Wang.
24) Beginning set of changes to make ipv4/ipv6 fragment handling more
scalable and less susceptible to overload and locking contention,
from Jesper Dangaard Brouer.
25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*()
instead. From Hong Zhiguo.
26) Optimize route usage in IPVS by avoiding reference counting where
possible, from Julian Anastasov.
27) Convert IPVS schedulers to RCU, also from Julian Anastasov.
28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger
Eitzenberger.
29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG,
nfnetlink_log, and nfnetlink_queue. From Gao feng.
30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa.
31) Support several new r8169 chips, from Hayes Wang.
32) Support tokenized interface identifiers in ipv6, from Daniel
Borkmann.
33) Use usbnet_link_change() helper in USB net driver, from Ming Lei.
34) Add 802.1ad vlan offload support, from Patrick McHardy.
35) Support mmap() based netlink communication, also from Patrick
McHardy.
36) Support HW timestamping in mlx4 driver, from Amir Vadai.
37) Rationalize AF_PACKET packet timestamping when transmitting, from
Willem de Bruijn and Daniel Borkmann.
38) Bring parity to what's provided by /proc/net/packet socket dumping
and the info provided by netlink socket dumping of AF_PACKET
sockets. From Nicolas Dichtel.
39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin
Poirier"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
filter: fix va_list build error
af_unix: fix a fatal race with bit fields
bnx2x: Prevent memory leak when cnic is absent
bnx2x: correct reading of speed capabilities
net: sctp: attribute printl with __printf for gcc fmt checks
netlink: kconfig: move mmap i/o into netlink kconfig
netpoll: convert mutex into a semaphore
netlink: Fix skb ref counting.
net_sched: act_ipt forward compat with xtables
mlx4_en: fix a build error on 32bit arches
Revert "bnx2x: allow nvram test to run when device is down"
bridge: avoid OOPS if root port not found
drivers: net: cpsw: fix kernel warn on cpsw irq enable
sh_eth: use random MAC address if no valid one supplied
3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
tg3: fix to append hardware time stamping flags
unix/stream: fix peeking with an offset larger than data in queue
unix/dgram: fix peeking with an offset larger than data in queue
unix/dgram: peek beyond 0-sized skbs
openvswitch: Remove unneeded ovs_netdev_get_ifindex()
...
Pull SCSI target update from Nicholas Bellinger:
"The highlights this round include:
- Add fileio support for WRITE_SAME w/ UNMAP=1 discard (asias)
- Add fileio support for UNMAP discard (asias)
- Add tcm_vhost hotplug support to work with upstream QEMU
vhost-scsi-pci code (asias + mst)
- Check for aborted sequence in tcm_fc response path (mdr)
- Add initial iscsit_transport support into iscsi-target code (nab)
- Refactor iscsi-target RX PDU logic + export request PDU handling
(nab)
- Refactor iscsi-target TX queue logic + export response PDU creation
(nab)
- Add new iSCSI Extentions for RDMA (ISER) target driver (Or + nab)
The biggest changes revolve around iscsi-target refactoring in order
to support the iser-target driver. This includes the conversion of
the iscsi-target data-path to use modern se_cmd->cmd_kref counting,
and allowing transport independent aspects of RX/TX PDU
request/response handling be shared across existing traditional
iscsi-target code, and the new iser-target code.
Thanks to Or Gerlitz + Mellanox for supporting the iser-target
development effort!"
* 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (25 commits)
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
tcm_vhost: Enable VIRTIO_SCSI_F_HOTPLUG
tcm_vhost: Add ioctl to get and set events missed flag
tcm_vhost: Add hotplug/hotunplug support
tcm_vhost: Refactor the lock nesting rule
tcm_fc: Check for aborted sequence
iscsi-target: Add iser network portal attribute
iscsi-target: Refactor TX queue logic + export response PDU creation
iscsi-target: Refactor RX PDU logic + export request PDU handling
iscsi-target: Add per transport iscsi_cmd alloc/free
iscsi-target: Add iser-target parameter keys + setup during login
iscsi-target: Initial traditional TCP conversion to iscsit_transport
iscsi-target: Add iscsit_transport API template
target: Add export of target_get_sess_cmd symbol
target: Change default sense key of NOT_READY
target/file: Set is_nonrot attribute
target: Add sbc_execute_unmap() helper
target/iblock: Add iblock_do_unmap() helper
target/file: Add fd_do_unmap() helper
target/file: Add UNMAP emulation support
...
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Support TIPC in the IPoIB driver. Since IPoIB now keeps track of its own
neighbour entries and doesn't require the packet to have a dst_entry
anymore, the only necessary changes are to:
- not drop multicast TIPC packets because of the unknown ethernet type
- handle unicast TIPC packets similar to IPv4/IPv6 unicast packets
in ipoib_start_xmit().
An alternative would be to remove all ethertype limitations since they're
not necessary anymore, all TIPC needs to know about is ARP and RARP since
it wants to always perform "path find", even if a path is already known.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
While WARN_ON("const string") will work, it's intent is not obvious.
The warning is more useful by showing the "state" value.
Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
If you have a patched up dhcp server (and dhclient), they will use
AF_PACKET/SOCK_DGRAM pair to send dhcp packets over IPoIB.
However, when testing an upstream kernel, this has been broken for a
very long time (I tested 2.6.34, 2.6.38, 3.0, 3.1, 3.8, HEAD).
It turns out that the hard_header routine in ipoib is not following
the API and is returning 0 even when it pushed data onto the skb.
This then causes af_packet.c to overwrite the header just pushed with
data from user space.
Fixing this gets DHCP working on IPoIB.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Use more preferable function name which implies using a pseudo-random
number generator.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Cc: Roland Dreier <roland@kernel.org>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: Steve Wise <swise@chelsio.com>
Cc: linux-rdma@vger.kernel.org
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Commit f0dc117abd ("IPoIB: Fix TX queue lockup with mixed UD/CM
traffic") attempts to solve an issue where unprocessed UD send
completions can deadlock the netdev.
The patch doesn't fully resolve the issue because if more than half
the tx_outstanding's were UD and all of the destinations are RC
reachable, arming the CQ doesn't solve the issue.
This patch uses the IB_CQ_REPORT_MISSED_EVENTS on the
ib_req_notify_cq(). If the rc is above 0, the UD send cq completion
callback is called directly to re-arm the send completion timer.
This issue is seen in very large parallel filesystem deployments
and the patch has been shown to correct the issue.
Cc: <stable@vger.kernel.org>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
If IPoIB fails to look up a path record (eg if it tries during an SM
failover when one SM is dead but the new one hasn't taken over yet), the
driver ends up with a neighbour structure but no address handle (AH).
There's no mechanism to recover from this: any further packets sent to
this destination will be silently dumped in ipoib_start_xmit().
Fix this by freeing the neighbour structures when a path rec query
fails, so that the next packet queued to be sent will trigger a new path
record query.
Signed-off-by: Roland Dreier <roland@purestorage.com>
If an SRP target is no longer reachable and srp_reset_host() fails to
reconnect then ib_srp will invoke scsi_remove_host(). That function
will invoke __scsi_remove_device() for each LUN. And that last
function will change the device state from SDEV_TRANSPORT_OFFLINE into
SDEV_CANCEL. Certain user space software, e.g. older versions of
multipathd, continue queueing I/O to SCSI devices that are in the
SDEV_CANCEL state.
If these I/O requests are submitted as SG_IO that means that the
REQ_PREEMPT flag will be set and hence that these requests will be
passed to srp_queuecommand(). These requests will time out. If new
requests are queued fast enough from user space these active requests
will prevent __scsi_remove_device() to finish.
Avoid this by failing I/O requests in the SDEV_CANCEL state if the
transport is offline. Introduce a new variable to keep track of the
transport state instead of failing requests if (!target->connected ||
target->qp_in_error), so that the SCSI error handler has a chance to
retry commands after a transport layer failure occurred.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: <stable@vger.kernel.org> # 3.8
Signed-off-by: Roland Dreier <roland@purestorage.com>
If a SCSI command times out it is passed to the SCSI error
handler. The SCSI error handler will try to abort the commands that
timed out. If aborting fails, a device reset will be attempted. If
the device reset also fails a host reset will be attempted. If the
host reset also fails the whole procedure will be repeated.
srp_abort() and srp_reset_device() fail for a QP in the error state.
srp_reset_host() fails after host removal has started. Hence if the
SCSI error handler gets invoked after host removal has started and
with the QP in the error state an endless loop will be triggered.
Modify the SCSI error handling functions in ib_srp as follows:
- Abort SCSI commands properly even if the QP is in the error state.
- Make srp_reset_host() reset SCSI requests even after host removal
has already started or if reconnecting fails.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dave@thedillows.org>
Cc: <stable@vger.kernel.org> # 3.8
Signed-off-by: Roland Dreier <roland@purestorage.com>
Do not send a task management function if sending will fail anyway
because either there is no RDMA/RC connection or the QP is in the
error state.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dave@thedillows.org>
Cc: <stable@vger.kernel.org> # 3.8
Signed-off-by: Roland Dreier <roland@purestorage.com>
Remove an assignment that incorrectly overwrites the connection state
update by srp_connect_target().
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dave@thedillows.org>
Cc: <stable@vger.kernel.org> # 3.8
Signed-off-by: Roland Dreier <roland@purestorage.com>
Reuse the "SG unaligned for FMR" driver flow to make the initiator
functional when running over driver instance which doesn't support
FMRs, such as a mlx4 virtual function.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Alex Tabachnik <alext@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Under IO/CPU stress its possible that the FMR pool might not have a
free FMR mapping element for iSER to use because of incomplete
background unmapping processing. In that case we get -EAGAIN and the
IO is pushed back to the SCSI layer which soon retries it. No need to
be so verbose about that.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
ISER_DEF_CMD_PER_LUN was meant to be ISCSI_DEF_XMIT_CMDS_MAX, not plain 128
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
If the ipoib client info isn't found on the _remove_one callback, we
must not attempt to scan the returned null list. Found by Coverity.
Signed-off-by: Itai Garbi <igarbi@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Implement version info as well as report firmware version and bus info
of the underlying IB HW device.
Signed-off-by: Yan Burman <yanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The hash function introduced in commit b63b70d877 ("IPoIB: Use a
private hash table for path lookup in xmit path") was designd to use
the 3 octets of the IPoIB HW address that holds the remote QPN.
However, this currently isn't the case on little-endian machines,
because the the code there uses the flags part (octet[0]) and not the
last octet of the QPN (octet[3]). Fix this.
The fix caused a checkpatch warning on line over 80 characters, to
solve that changed the name of the temp variable that holds the daddr.
Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
After commit b13912bbb4 ("IPoIB: Call skb_dst_drop() once skb is
enqueued for sending"), using connected mode and running multithreaded
iperf for long time, ie
iperf -c <IP> -P 16 -t 3600
results in a crash.
After the above-mentioned patch, the driver is calling skb_orphan() and
skb_dst_drop() after calling post_send() in ipoib_cm.c::ipoib_cm_send()
(also in ipoib_ib.c::ipoib_send())
The problem with this is, as is written in a comment in both routines,
"it's entirely possible that the completion handler will run before we
execute anything after the post_send()." This leads to running the
skb cleanup routines simultaneously in two different contexts.
The solution is to always perform the skb_orphan() and skb_dst_drop()
before queueing the send work request. If an error occurs, then it
will be no different than the regular case where dev_free_skb_any() in
the completion path, which is assumed to be after these two routines.
Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Currently, IPoIB delays collecting send completions for TX packets in
order to batch work more efficiently. It does skb_orphan() right after
queuing the packets so that destructors run early, to avoid problems
like holding socket send buffers for too long (since we might not
collect a send completion until a long time after the packet is
actually sent).
However, IPoIB clears IFF_XMIT_DST_RELEASE because it actually looks
at skb_dst() to update the PMTU when it gets a too-long packet. This
means that the packets sitting in the TX ring with uncollected send
completions are holding a reference on the dst. We've seen this lead
to pathological behavior with respect to route and neighbour GC. The
easy fix for this is to call skb_dst_drop() when we call skb_orphan().
Also, give packets sent via connected mode (CM) the same skb_orphan()
/ skb_dst_drop() treatment that packets sent via datagram mode get.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Pull target updates from Nicholas Bellinger:
"It has been a very busy development cycle this time around in target
land, with the highlights including:
- Kill struct se_subsystem_dev, in favor of direct se_device usage
(hch)
- Simplify reservations code by combining SPC-3 + SCSI-2 support for
virtual backends only (hch)
- Simplify ALUA code for virtual only backends, and remove left over
abstractions (hch)
- Pass sense_reason_t as return value for I/O submission path (hch)
- Refactor MODE_SENSE emulation to allow for easier addition of new
mode pages. (roland)
- Add emulation of MODE_SELECT (roland)
- Fix bug in handling of ExpStatSN wrap-around (steve)
- Fix bug in TMR ABORT_TASK lookup in qla2xxx target (steve)
- Add WRITE_SAME w/ UNMAP=0 support for IBLOCK backends (nab)
- Convert ib_srpt to use modern target_submit_cmd caller + drop
legacy ioctx->kref usage (nab)
- Convert ib_srpt to use modern target_submit_tmr caller (nab)
- Add link_magic for fabric allow_link destination target_items for
symlinks within target_core_fabric_configfs.c code (nab)
- Allocate pointers in instead of full structs for
config_group->default_groups (sebastian)
- Fix 32-bit highmem breakage for FILEIO (sebastian)
All told, hch was able to shave off another ~1K LOC by killing the
se_subsystem_dev abstraction, along with a number of PR + ALUA
simplifications. Also, a nice patch by Roland is the refactoring of
MODE_SENSE handling, along with the addition of initial MODE_SELECT
emulation support for virtual backends.
Sebastian found a long-standing issue wrt to allocation of full
config_group instead of pointers for config_group->default_group[]
setup in a number of areas, which ends up saving memory with big
configurations. He also managed to fix another long-standing BUG wrt
to broken 32-bit highmem support within the FILEIO backend driver.
Thank you again to everyone who contributed this round!"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (50 commits)
target/iscsi_target: Add NodeACL tags for initiator group support
target/tcm_fc: fix the lockdep warning due to inconsistent lock state
sbp-target: fix error path in sbp_make_tpg()
sbp-target: use simple assignment in tgt_agent_rw_agent_state()
iscsi-target: use kstrdup() for iscsi_param
target/file: merge fd_do_readv() and fd_do_writev()
target/file: Fix 32-bit highmem breakage for SGL -> iovec mapping
target: Add link_magic for fabric allow_link destination target_items
ib_srpt: Convert TMR path to target_submit_tmr
ib_srpt: Convert I/O path to target_submit_cmd + drop legacy ioctx->kref
target: Make spc_get_write_same_sectors return sector_t
target/configfs: use kmalloc() instead of kzalloc() for default groups
target/configfs: allocate only 6 slots for dev_cg->default_groups
target/configfs: allocate pointers instead of full struct for default_groups
target: update error handling for sbc_setup_write_same()
iscsit: use GFP_ATOMIC under spin lock
iscsi_target: Remove redundant null check before kfree
target/iblock: Forward declare bio helpers
target: Clean up flow in transport_check_aborted_status()
target: Clean up logic in transport_put_cmd()
...
Make it possible to disconnect the IB RC connection used by the SRP
protocol to communicate with a target.
Have the SRP transport layer create a sysfs "delete" attribute for
initiator drivers that support this functionality.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Now that SRP recreates the CM ID, QP, and CQ for each connection,
there is no need to wait for the timewait state to complete.
Signed-off-by: Vu Pham <vu@mellanox.com>
Signed-off-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
HW QP FATAL errors persist over a reset operation, but we can recover
from that by recreating the QP and associated CQs for each connection.
Creating a new QP/CQ also completely forecloses any possibility of
getting stale completions or packets on the new connection.
Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
[ updated to current code from OFED, cleaned up commit message ]
Signed-off-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Only queue removal work after having changed the target state
into SRP_TARGET_REMOVED and not if that state was already equal
to SRP_TARGET_REMOVED. That allows us to remove the state
SRP_TARGET_DEAD. Add a call to srp_disconnect_target() in
srp_remove_target() -- due to previous changes it is now safe to
invoke that function even if the IB connection has already
been disconnected. This change allows us to replace the target
removal code in srp_remove_one() by an (indirect) call to
srp_remove_target(). Rename srp_target_port.work into
srp_target_port.remove_work to reflect its usage.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Keep track of the connection state. Only report QP errors while
connected. Only invoke ib_send_cm_dreq() when connected so that
invoking srp_disconnect_target() after having received a DREQ does not
cause an error message to be printed.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
If the RDMA RC connection is closed, tell the SCSI mid-layer to
terminate all pending commands instead of only the first.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Introduce the function srp_handle_qp_err(), change the type of
qp_in_error from int into bool and move the initialization of that
variable from srp_reconnect_target() to srp_connect_target().
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Since scsi_remove_host() has been modified so that SCSI error handling
functions will no longer be invoked after scsi_remove_host() returns,
the test at the start of srp_send_tsk_mgmt() is now superfluous.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Some SCSI upper layer drivers, e.g. sd, issue SCSI commands from
inside scsi_remove_host() (see the sd_shutdown() call in sd_remove()).
Make sure that these commands have a chance to reach the SCSI device.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Block the SCSI host while reconnecting instead of representing the
reconnection activity as a distinct SRP target state. This allows us
to eliminate the target state SRP_TARGET_CONNECTING.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Increase the block layer timeout for disks so that it is above the
InfiniBand transport layer timeout.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
This patch converts the TMR path in srpt_handle_tsk_mgmt() to use
target_submit_tmr() with TARGET_SCF_ACK_KREF flag usage.
v2: Drop ununused res in target_submit_tmr (Fengguang.Wu)
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Roland Dreier <roland@kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch converts the main srpt_handle_cmd() I/O path to use modern
target_submit_cmd() with TARGET_SCF_ACK_KREF flag usage. This includes
dropping the original internal ioctx->kref + srpt_put_send_ioctx() usage
in favor of target_put_sess_cmd() w/ se_cmd_t->cmd_kref within ib_srpt
response callbacks.
It also updates srpt_abort_cmd() to call target_put_sess_cmd() for
completion of aborted commands, and adds target_wait_for_sess_cmds() into
srpt_release_channel_work() to allow outstanding I/O to complete during
session shutdown.
Also, go ahead and update srpt_handle_tsk_mgmt() to make the remaining
transport_init_se_cmd() to setup the ioctx->cmd with se_tmr_req.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Roland Dreier <roland@kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Pass the sense reason as an explicit return value from the I/O submission
path instead of storing it in struct se_cmd and using negative return
values. This cleans up a lot of the code pathes, and with the sparse
annotations for the new sense_reason_t type allows for much better
error checking.
(nab: Convert spc_emulate_modesense + spc_emulate_modeselect to use
sense_reason_t with Roland's MODE SELECT changes)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Pull scsi target updates from Nicholas Bellinger:
"Things have been calm for the most part with no new fabric drivers in
flight for v3.7 (we're up to eight now !), so this update is primarily
focused on addressing a few long-standing items within target-core and
iscsi-target fabric code.
The highlights include:
- target: Simplify fabric sense data length handling (roland)
- qla2xxx: Fix endianness of task management response code (roland)
- target: fix truncation of mode data, support zero allocation length
(paolo)
- target: Properly support zero-length commands in normal processing
path (paolo)
- iscsi-target: Correctly set 0xffffffff field within ISCSI_OP_REJECT
PDU (ronnie + nab)
- iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG
demo-mode (ronnie + nab)
- target/file: Re-enable optional fd_buffered_io=1 operation (nab +
hch)
- iscsi-target: Add MaxXmitDataSegmenthLength forr target ->
initiator MDRSL declaration (nab)
- target: Add target_submit_cmd_map_sgls for SGL fabric memory
passthrough (nab + hch)
- tcm_loop: Convert I/O path to use target_submit_cmd_map_sgls (hch +
nab)
- tcm_vhost: Convert I/O path to use target_submit_cmd_map_sgls (nab
+ hch)
The last series for adding a new target_submit_cmd_map_sgls() fabric
caller (as requested by hch) that accepts pre-allocated SGL memory
(using existing logic), along with converting tcm_loop + tcm_vhost has
only been in -next for the last days, but has gotten enough review
+testing and is clear enough a mechanical change that I think it's
reasonable to merge for -rc1 code.
Thanks again to everyone who contributed this round! Extra special
thanks to Roland (PureStorage) for tracking down the qla2xxx target
TMR response code endian issue, and to Paolo (Redhat) for resolving
the long standing zero-length CDB issues within target-core between
virtual and pSCSI backends."
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (44 commits)
iscsi-target: Bump defaults for nopin_timeout + nopin_response_timeout values
iscsit: proper endianess conversions
iscsit: use the itt_t abstract type
iscsit: add missing endianess conversion in iscsit_check_inaddr_any
iscsit: remove incorrect unlock in iscsit_build_sendtargets_resp
iscsit: mark various functions static
target/iscsi: precedence bug in iscsit_set_dataout_sequence_values()
target/usb-gadget: strlen() doesn't count the terminator
target/usb-gadget: remove duplicate initialization
tcm_vhost: Convert I/O path to use target_submit_cmd_map_sgls
target: Add control CDB READ payload zero work-around
tcm_loop: Convert I/O path to use target_submit_cmd_map_sgls
target: Add target_submit_cmd_map_sgls for SGL fabric memory passthrough
iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG demo-mode
iscsi-target: Change iscsi_target_seq_pdu_list.c to honor MaxXmitDataSegmentLength
iscsi-target: Add MaxXmitDataSegmentLength connection recovery check
iscsi-target: Convert incoming PDU payload checks to MaxXmitDataSegmentLength
iscsi-target: Enable MaxXmitDataSegmentLength operation in login path
iscsi-target: Add base MaxXmitDataSegmentLength code
target/file: Re-enable optional fd_buffered_io=1 operation
...
Or Gerlitz
Roi Dayan
Nicholas Bellinger
Joern Engel
Linus Torvalds
Roland Dreier
Andrew Morton
Patrick McHardy
Grant Grundler
Doug Ledford
Akinobu Mita
Mike Marciniszyn
Bart Van Assche
Itai Garbi
Yan Burman
Shlomo Pongratz
Vu Pham
Ishai Rabinovitz
Christoph Hellwig