Commit Graph

3990 Commits

Author SHA1 Message Date
Linus Torvalds 1200b6809d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   1) Support more Realtek wireless chips, from Jes Sorenson.

   2) New BPF types for per-cpu hash and arrap maps, from Alexei
      Starovoitov.

   3) Make several TCP sysctls per-namespace, from Nikolay Borisov.

   4) Allow the use of SO_REUSEPORT in order to do per-thread processing
   of incoming TCP/UDP connections.  The muxing can be done using a
   BPF program which hashes the incoming packet.  From Craig Gallek.

   5) Add a multiplexer for TCP streams, to provide a messaged based
      interface.  BPF programs can be used to determine the message
      boundaries.  From Tom Herbert.

   6) Add 802.1AE MACSEC support, from Sabrina Dubroca.

   7) Avoid factorial complexity when taking down an inetdev interface
      with lots of configured addresses.  We were doing things like
      traversing the entire address less for each address removed, and
      flushing the entire netfilter conntrack table for every address as
      well.

   8) Add and use SKB bulk free infrastructure, from Jesper Brouer.

   9) Allow offloading u32 classifiers to hardware, and implement for
      ixgbe, from John Fastabend.

  10) Allow configuring IRQ coalescing parameters on a per-queue basis,
      from Kan Liang.

  11) Extend ethtool so that larger link mode masks can be supported.
      From David Decotigny.

  12) Introduce devlink, which can be used to configure port link types
      (ethernet vs Infiniband, etc.), port splitting, and switch device
      level attributes as a whole.  From Jiri Pirko.

  13) Hardware offload support for flower classifiers, from Amir Vadai.

  14) Add "Local Checksum Offload".  Basically, for a tunneled packet
      the checksum of the outer header is 'constant' (because with the
      checksum field filled into the inner protocol header, the payload
      of the outer frame checksums to 'zero'), and we can take advantage
      of that in various ways.  From Edward Cree"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits)
  bonding: fix bond_get_stats()
  net: bcmgenet: fix dma api length mismatch
  net/mlx4_core: Fix backward compatibility on VFs
  phy: mdio-thunder: Fix some Kconfig typos
  lan78xx: add ndo_get_stats64
  lan78xx: handle statistics counter rollover
  RDS: TCP: Remove unused constant
  RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket
  net: smc911x: convert pxa dma to dmaengine
  team: remove duplicate set of flag IFF_MULTICAST
  bonding: remove duplicate set of flag IFF_MULTICAST
  net: fix a comment typo
  ethernet: micrel: fix some error codes
  ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it
  bpf, dst: add and use dst_tclassid helper
  bpf: make skb->tc_classid also readable
  net: mvneta: bm: clarify dependencies
  cls_bpf: reset class and reuse major in da
  ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c
  ldmvsw: Add ldmvsw.c driver code
  ...
2016-03-19 10:05:34 -07:00
Linus Torvalds 70477371dc Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
 "Here is the crypto update for 4.6:

  API:
   - Convert remaining crypto_hash users to shash or ahash, also convert
     blkcipher/ablkcipher users to skcipher.
   - Remove crypto_hash interface.
   - Remove crypto_pcomp interface.
   - Add crypto engine for async cipher drivers.
   - Add akcipher documentation.
   - Add skcipher documentation.

  Algorithms:
   - Rename crypto/crc32 to avoid name clash with lib/crc32.
   - Fix bug in keywrap where we zero the wrong pointer.

  Drivers:
   - Support T5/M5, T7/M7 SPARC CPUs in n2 hwrng driver.
   - Add PIC32 hwrng driver.
   - Support BCM6368 in bcm63xx hwrng driver.
   - Pack structs for 32-bit compat users in qat.
   - Use crypto engine in omap-aes.
   - Add support for sama5d2x SoCs in atmel-sha.
   - Make atmel-sha available again.
   - Make sahara hashing available again.
   - Make ccp hashing available again.
   - Make sha1-mb available again.
   - Add support for multiple devices in ccp.
   - Improve DMA performance in caam.
   - Add hashing support to rockchip"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
  crypto: qat - remove redundant arbiter configuration
  crypto: ux500 - fix checks of error code returned by devm_ioremap_resource()
  crypto: atmel - fix checks of error code returned by devm_ioremap_resource()
  crypto: qat - Change the definition of icp_qat_uof_regtype
  hwrng: exynos - use __maybe_unused to hide pm functions
  crypto: ccp - Add abstraction for device-specific calls
  crypto: ccp - CCP versioning support
  crypto: ccp - Support for multiple CCPs
  crypto: ccp - Remove check for x86 family and model
  crypto: ccp - memset request context to zero during import
  lib/mpi: use "static inline" instead of "extern inline"
  lib/mpi: avoid assembler warning
  hwrng: bcm63xx - fix non device tree compatibility
  crypto: testmgr - allow rfc3686 aes-ctr variants in fips mode.
  crypto: qat - The AE id should be less than the maximal AE number
  lib/mpi: Endianness fix
  crypto: rockchip - add hash support for crypto engine in rk3288
  crypto: xts - fix compile errors
  crypto: doc - add skcipher API documentation
  crypto: doc - update AEAD AD handling
  ...
2016-03-17 11:22:54 -07:00
Johan Hedberg 6a0e78072c Bluetooth: Fix potential buffer overflow with Add Advertising
The Add Advertising command handler does the appropriate checks for
the AD and Scan Response data, however fails to take into account the
general length of the mgmt command itself, which could lead to
potential buffer overflows. This patch adds the necessary check that
the mgmt command length is consistent with the given ad and scan_rsp
lengths.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
2016-03-11 16:28:43 +01:00
Johan Hedberg 6a19cc8c89 Bluetooth: Fix setting correct flags in AD
A recent change added MGMT_ADV_FLAG_DISCOV to the flags returned by
get_adv_instance_flags(), however failed to take into account limited
discoverable mode. This patch fixes the issue by setting the correct
discoverability flag in the AD data.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-11 16:28:24 +01:00
Johan Hedberg 9c176cec42 Bluetooth: Increment management interface revision
Increment the mgmt revision due to the recently added limited
privacy mode.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-10 19:51:30 +01:00
Johan Hedberg 82a37adeed Bluetooth: Add support for limited privacy mode
Introduce a limited privacy mode indicated by value 0x02 to the mgmt
Set Privacy command.

With value 0x02 the kernel will use privacy mode with a resolvable
private address. In case the controller is bondable and discoverable
the identity address will be used.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-10 19:51:30 +01:00
Johan Hedberg d43efbd0d5 Bluetooth: Fix adding discoverable to adv instance flags
When lookup up the advertising instance flags for the default
advertising instance (0) the discoverable flag should be filled in
based on the HCI_DISCOVERABLE flag.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-10 19:51:29 +01:00
Johan Hedberg eec7a01dc8 Bluetooth: Move memset closer to where it's needed
Minor fix to not do the memset until the variable it clears is
actually used.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-10 19:51:29 +01:00
Wei-Ning Huang d82142a8b1 Bluetooth: hci_core: cancel power off delayed work properly
When the HCI_AUTO_OFF flag is cleared, the power_off delayed work need
to be cancel or HCI will be powered off even if it's managed.

Signed-off-by: Wei-Ning Huang <wnhuang@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23 20:29:38 +01:00
Heiner Kallweit b6e402fc84 Bluetooth: Use managed version of led_trigger_register in LED trigger
Recently a managed version of led_trigger_register was introduced.
Using devm_led_trigger_register allows to simplify the LED trigger code.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23 20:29:36 +01:00
Heiner Kallweit 6d5d2ee63c Bluetooth: add LED trigger for indicating HCI is powered up
Add support for LED triggers to the Bluetooth subsystem and add kernel
config symbol BT_LEDS for it.

For now one trigger for indicating "HCI is powered up" is supported.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23 20:29:35 +01:00
Douglas Anderson 3bd7594e69 Bluetooth: hci_core: Avoid mixing up req_complete and req_complete_skb
In commit 44d2713774 ("Bluetooth: Compress the size of struct
hci_ctrl") we squashed down the size of the structure by using a union
with the assumption that all users would use the flag to determine
whether we had a req_complete or a req_complete_skb.

Unfortunately we had a case in hci_req_cmd_complete() where we weren't
looking at the flag.  This can result in a situation where we might be
storing a hci_req_complete_skb_t in a hci_req_complete_t variable, or
vice versa.

During some testing I found at least one case where the function
hci_req_sync_complete() was called improperly because the kernel thought
that it didn't require an SKB.  Looking through the stack in kgdb I
found that it was called by hci_event_packet() and that
hci_event_packet() had both of its locals "req_complete" and
"req_complete_skb" pointing to the same place: both to
hci_req_sync_complete().

Let's make sure we always check the flag.

For more details on debugging done, see <http://crbug.com/588288>.

Fixes: 44d2713774 ("Bluetooth: Compress the size of struct hci_ctrl")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-20 08:52:28 +01:00
Johan Hedberg cff10ce7b4 Bluetooth: Fix incorrect removing of IRKs
The commit cad20c2780 was supposed to
fix handling of devices first using public addresses and then
switching to RPAs after pairing. Unfortunately it missed a couple of
key places in the code.

1. When evaluating which devices should be removed from the existing
white list we also need to consider whether we have an IRK for them or
not, i.e. a call to hci_find_irk_by_addr() is needed.

2. In smp_notify_keys() we should not be requiring the knowledge of
the RPA, but should simply keep the IRK around if the other conditions
require it.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org # 4.4+
2016-01-29 11:47:24 +01:00
Johan Hedberg a2342c5fe5 Bluetooth: L2CAP: Fix setting chan src info before adding PSM/CID
At least the l2cap_add_psm() routine depends on the source address
type being properly set to know what auto-allocation ranges to use, so
the assignment to l2cap_chan needs to happen before this.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-29 11:47:24 +01:00
Johan Hedberg 92594a5112 Bluetooth: L2CAP: Fix auto-allocating LE PSM values
The LE dynamic PSM range is different from BR/EDR (0x0080 - 0x00ff)
and doesn't have requirements relating to parity, so separate checks
are needed.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-29 11:47:24 +01:00
Johan Hedberg 114f9f1e03 Bluetooth: L2CAP: Introduce proper defines for PSM ranges
Having proper defines makes the code a bit readable, it also avoids
duplicating hard-coded values since these are also needed when
auto-allocating PSM values (in a subsequent patch).

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-29 11:47:24 +01:00
Herbert Xu 71af2f6bb2 Bluetooth: Use skcipher and hash
This patch replaces uses of blkcipher with skcipher and the long
obsolete hash interface with shash.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-27 20:36:04 +08:00
Lukasz Duda 87f5fedb3b Bluetooth: 6lowpan: Fix handling of uncompressed IPv6 packets
This patch fixes incorrect handling of the 6lowpan packets that contain
uncompressed IPv6 header.

RFC4944 specifies a special dispatch for 6lowpan to carry uncompressed
IPv6 header. This dispatch (1 byte long) has to be removed during
reception and skb data pointer has to be moved. To correctly point in
the beginning of the IPv6 header the dispatch byte has to be pulled off
before packet can be processed by netif_rx_in().

Test scenario: IPv6 packets are not correctly interpreted by the network
layer when IPv6 header is not compressed (e.g. ICMPv6 Echo Reply is not
propagated correctly to the ICMPv6 layer because the extra byte will make
the header look corrupted).

Similar approach is done for IEEE 802.15.4.

Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no>
Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Cc: stable@vger.kernel.org # 4.4+
2016-01-23 12:25:53 +00:00
Glenn Ruben Bakke 4c58f3282e Bluetooth: 6lowpan: Fix kernel NULL pointer dereferences
The fixes provided in this patch assigns a valid net_device structure to
skb before dispatching it for further processing.

Scenario #1:
============

Bluetooth 6lowpan receives an uncompressed IPv6 header, and dispatches it
to netif. The following error occurs:

Null pointer dereference error #1 crash log:

[  845.854013] BUG: unable to handle kernel NULL pointer dereference at
               0000000000000048
[  845.855785] IP: [<ffffffff816e3d36>] enqueue_to_backlog+0x56/0x240
...
[  845.909459] Call Trace:
[  845.911678]  [<ffffffff816e3f64>] netif_rx_internal+0x44/0xf0

The first modification fixes the NULL pointer dereference error by
assigning dev to the local_skb in order to set a valid net_device before
processing the skb by netif_rx_ni().

Scenario #2:
============

Bluetooth 6lowpan receives an UDP compressed message which needs further
decompression by nhc_udp. The following error occurs:

Null pointer dereference error #2 crash log:

[   63.295149] BUG: unable to handle kernel NULL pointer dereference at
               0000000000000840
[   63.295931] IP: [<ffffffffc0559540>] udp_uncompress+0x320/0x626
               [nhc_udp]

The second modification fixes the NULL pointer dereference error by
assigning dev to the local_skb in the case of a udp compressed packet.
The 6lowpan udp_uncompress function expects that the net_device is set in
the skb when checking lltype.

Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no>
Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Cc: stable@vger.kernel.org # 4.4+
2016-01-23 12:21:47 +00:00
Johannes Berg 787b306cf3 Bluetooth: avoid rebuilding hci_sock all the time
Instead, allow using string formatting with send_monitor_note()
and access init_utsname().

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-06 16:36:44 +01:00
Johan Hedberg 78b781ca0d Bluetooth: Add support for Start Limited Discovery command
This patch implements the mgmt Start Limited Discovery command. Most
of existing Start Discovery code is reused since the only difference
is the presence of a 'limited' flag as part of the discovery state.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-05 17:02:50 +01:00
Johan Hedberg 0d3b7f64c8 Bluetooth: Change eir_has_data_type() to more generic eir_get_data()
To make the EIR parsing helper more general purpose, make it return
the found data and its length rather than just saying whether the data
was present or not.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-05 17:02:49 +01:00
Geliang Tang 7eb7404f7e Bluetooth: use list_for_each_entry*
Use list_for_each_entry*() instead of list_for_each*() to simplify
the code.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-20 08:11:10 +01:00
David S. Miller b3e0d3d7ba Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/geneve.c

Here we had an overlapping change, where in 'net' the extraneous stats
bump was being removed whilst in 'net-next' the final argument to
udp_tunnel6_xmit_skb() was being changed.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-17 22:08:28 -05:00
David S. Miller 5233252fce bluetooth: Validate socket address length in sco_sock_bind().
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15 15:39:08 -05:00
Danny Schweizer 4ada1282d8 Bluetooth: Do not filter multicast addresses by default
A Linux PC is connected with another device over Bluetooth PAN using a
BNEP interface.

Whenever a packet is tried to be sent over the BNEP interface, the
function "bnep_net_xmit()" in "net/bluetooth/bnep/netdev.c" is called.
This function calls "bnep_net_mc_filter()", which checks (if the
destination address is multicast) if the address is set in a certain
multicast filter (&s->mc_filter). If it is not, then it is not sent out.

This filter is only changed in two other functions, found in
net/bluetooth/bnep/core.c": in "bnep_ctrl_set_mc_filter()", which is
only called if a message of type "BNEP_FILTER_MULTI_ADDR_SET" is
received. Otherwise, it is set in "bnep_add_connection()", where it is
set to a default value which only adds the broadcast address to the
filter:

set_bit(bnep_mc_hash(dev->broadcast), (ulong *) &s->mc_filter);

To sum up, if the BNEP interface does not receive any message of type
"BNEP_FILTER_MULTI_ADDR_SET", it will not send out any messages with
multicast destination addresses except for broadcast.

However, in the BNEP specification (page 27 in
http://grouper.ieee.org/groups/802/15/Bluetooth/BNEP.pdf), it is said
that per default, all multicast addresses should not be filtered, i.e.
the BNEP interface should be able to send packets with any multicast
destination address.

It seems that the default case is wrong: the multicast filter should not
block almost all multicast addresses, but should not filter out any.

This leads to the problem that e.g. Neighbor Solicitation messages sent
with Bluetooth PAN over the BNEP interface to a multicast destination
address other than broadcast are blocked and not sent out.

Therefore, in the default case, we set the mc_filter to ~0LL to not
filter out any multicast addresses.

Signed-off-by: Danny Schweizer <danny.schweizer@proofnet.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-11 10:46:16 +01:00
Alexander Aring 00f5931411 6lowpan: add lowpan dev register helpers
This patch introduces register and unregister functionality for lowpan
interfaces. While register a lowpan interface there are several things
which need to be initialize by the 6lowpan subsystem. Upcoming
functionality need to register/unregister per interface components e.g.
debugfs entry.

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 01:25:25 +01:00
Yichen Zhao 1a11ec89db Bluetooth: Fix locking in bt_accept_dequeue after disconnection
Fix a crash that may happen when bt_accept_dequeue is run after a
Bluetooth connection has been disconnected. bt_accept_unlink was called
after release_sock, permitting bt_accept_unlink to run twice on the same
socket and cause a NULL pointer dereference.

[50510.241632] BUG: unable to handle kernel NULL pointer dereference at 00000000000001a8
[50510.241694] IP: [<ffffffffc01243f7>] bt_accept_unlink+0x47/0xa0 [bluetooth]
[50510.241759] PGD 0
[50510.241776] Oops: 0002 [#1] SMP
[50510.241802] Modules linked in: rtl8192cu rtl_usb rtlwifi rtl8192c_common 8021q garp stp mrp llc rfcomm bnep nls_iso8859_1 intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp arc4 ath9k ath9k_common ath9k_hw ath kvm eeepc_wmi asus_wmi mac80211 snd_hda_codec_hdmi snd_hda_codec_realtek sparse_keymap crct10dif_pclmul snd_hda_codec_generic crc32_pclmul snd_hda_intel snd_hda_controller cfg80211 snd_hda_codec i915 snd_hwdep snd_pcm ghash_clmulni_intel snd_timer snd soundcore serio_raw cryptd drm_kms_helper drm i2c_algo_bit shpchp ath3k mei_me lpc_ich btusb bluetooth 6lowpan_iphc mei lp parport wmi video mac_hid psmouse ahci libahci r8169 mii
[50510.242279] CPU: 0 PID: 934 Comm: krfcommd Not tainted 3.16.0-49-generic #65~14.04.1-Ubuntu
[50510.242327] Hardware name: ASUSTeK Computer INC. VM40B/VM40B, BIOS 1501 12/09/2014
[50510.242370] task: ffff8800d9068a30 ti: ffff8800d7a54000 task.ti: ffff8800d7a54000
[50510.242413] RIP: 0010:[<ffffffffc01243f7>]  [<ffffffffc01243f7>] bt_accept_unlink+0x47/0xa0 [bluetooth]
[50510.242480] RSP: 0018:ffff8800d7a57d58  EFLAGS: 00010246
[50510.242511] RAX: 0000000000000000 RBX: ffff880119bb8c00 RCX: ffff880119bb8eb0
[50510.242552] RDX: ffff880119bb8eb0 RSI: 00000000fffffe01 RDI: ffff880119bb8c00
[50510.242592] RBP: ffff8800d7a57d60 R08: 0000000000000283 R09: 0000000000000001
[50510.242633] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800d8da9eb0
[50510.242673] R13: ffff8800d74fdb80 R14: ffff880119bb8c00 R15: ffff8800d8da9c00
[50510.242715] FS:  0000000000000000(0000) GS:ffff88011fa00000(0000) knlGS:0000000000000000
[50510.242761] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[50510.242794] CR2: 00000000000001a8 CR3: 0000000001c13000 CR4: 00000000001407f0
[50510.242835] Stack:
[50510.242849]  ffff880119bb8eb0 ffff8800d7a57da0 ffffffffc0124506 ffff8800d8da9eb0
[50510.242899]  ffff8800d8da9c00 ffff8800d9068a30 0000000000000000 ffff8800d74fdb80
[50510.242949]  ffff8800d6f85208 ffff8800d7a57e08 ffffffffc0159985 000000000000001f
[50510.242999] Call Trace:
[50510.243027]  [<ffffffffc0124506>] bt_accept_dequeue+0xb6/0x180 [bluetooth]
[50510.243085]  [<ffffffffc0159985>] l2cap_sock_accept+0x125/0x220 [bluetooth]
[50510.243128]  [<ffffffff810a1b30>] ? wake_up_state+0x20/0x20
[50510.243163]  [<ffffffff8164946e>] kernel_accept+0x4e/0xa0
[50510.243200]  [<ffffffffc05b97cd>] rfcomm_run+0x1ad/0x890 [rfcomm]
[50510.243238]  [<ffffffffc05b9620>] ? rfcomm_process_rx+0x8a0/0x8a0 [rfcomm]
[50510.243281]  [<ffffffff81091572>] kthread+0xd2/0xf0
[50510.243312]  [<ffffffff810914a0>] ? kthread_create_on_node+0x1c0/0x1c0
[50510.243353]  [<ffffffff8176e9d8>] ret_from_fork+0x58/0x90
[50510.243387]  [<ffffffff810914a0>] ? kthread_create_on_node+0x1c0/0x1c0
[50510.243424] Code: 00 48 8b 93 b8 02 00 00 48 8d 83 b0 02 00 00 48 89 51 08 48 89 0a 48 89 83 b0 02 00 00 48 89 83 b8 02 00 00 48 8b 83 c0 02 00 00 <66> 83 a8 a8 01 00 00 01 48 c7 83 c0 02 00 00 00 00 00 00 f0 ff
[50510.243685] RIP  [<ffffffffc01243f7>] bt_accept_unlink+0x47/0xa0 [bluetooth]
[50510.243737]  RSP <ffff8800d7a57d58>
[50510.243758] CR2: 00000000000001a8
[50510.249457] ---[ end trace bb984f932c4e3ab3 ]---

Signed-off-by: Yichen Zhao <zhaoyichen@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:51 +01:00
Johan Hedberg acb9f911ea Bluetooth: Don't treat connection timeout as a failure
When we're doing background scanning and connection attempts it's
possible we timeout trying to connect and go back to scanning again.
The timeout triggers a HCI_LE_Create_Connection_Cancel which will
trigger a Connection Complete with "Unknown Connection Identifier"
error status. Since we go back to scanning this isn't really a failure
and shouldn't be presented as such to user space through mgmt.

The exception to this is if the connection attempt was due to an
explicit request on an L2CAP socket (indicated by
params->explicit_connect being true). Since the socket will get an
error it's consistent to also notify the failure on mgmt in this case.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:51 +01:00
Johan Hedberg 2f99536a5b Bluetooth: Use continuous scanning when creating LE connections
All LE connections are now triggered through a preceding passive scan
and waiting for a connectable advertising report. This means we've got
the best possible guarantee that the device is within range and should
be able to request the controller to perform continuous scanning. This
way we minimize the risk that we miss out on any advertising packets.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org # 4.3+
2015-12-10 00:51:51 +01:00
Johan Hedberg cab054ab47 Bluetooth: Clean up current advertising instance tracking
We can simplify a lot of code by making sure hdev->cur_adv_instance is
always up-to-date. This allows e.g. the removal of the
get_current_adv_instance() helper function and the special
HCI_ADV_CURRENT value. This patch also makes selecting instance 0x00
explicit in the various calls where advertising instances aren't
enabled, e.g. when HCI_ADVERTISING is set or we've just finished
enabling LE.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:50 +01:00
Johan Hedberg d6b7e2cddb Bluetooth: Clean up advertising initialization in powered_update_hci()
The logic in powered_update_hci() to initialize the advertising data &
state is a bit more complicated than it needs to be. It was previously
not doing anything if HCI_LE_ENABLED wasn't set, but this was not
obvious by quickly looking at the code. Now the conditions for the
various actions are more explicit. Another simplification is due to
the fact that __hci_req_schedule_adv_instance() takes care of setting
hdev->cur_adv_instance so there's no need to set it before calling the
function.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:50 +01:00
Johan Hedberg 550a8ca765 Bluetooth: Remove redundant check for req.cmd_q
The hci_req_run() function already checks for empty cmd_q and bails
out if necessary. Also, req.cmd_q should really be treated as private
data of the request and not accessed directly.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:49 +01:00
Johan Hedberg d6dac32e84 Bluetooth: Fix updating wrong instance's scan_rsp data
The __hci_req_update_scan_rsp_data gets the instance to be updated
which should get passed to update_inst_scan_rsp_data() instead of
always enabling the current instance.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:49 +01:00
Johan Hedberg 17fd08ffb5 Bluetooth: Remove unnecessary HCI_ADVERTISING_INSTANCE flag
This flag just tells us whether hdev->adv_instances is empty or not.
We can equally well use the list_empty() function to get this
information.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:49 +01:00
Johan Hedberg 02c04afea9 Bluetooth: Simplify read_adv_features code
The code in the Read Advertising Features mgmt command handler is
unnecessarily complicated. Clean it up and remove unnecessary
variables & branches.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:49 +01:00
Johan Hedberg 2ff13894cf Bluetooth: Perform HCI update for power on synchronously
The request to update HCI during power on is always coming either from
hdev->req_workqueue or through an ioctl, so it's safe to use
hci_req_sync for it. This way we also eliminate potential races with
incoming mgmt commands or other actions while powering on.

Part of this refactoring is the splitting of mgmt_powered() into
mgmt_power_on() and __mgmt_power_off() functions. The main reason is
the different requirements as far as hdev locking is concerned, as
highlighted with the __ prefix of the power off API.

Since the power on in the case of clearing the AUTO_OFF flag cannot be
done synchronously in the set_powered mgmt handler, the hci_power_on
work callback is extended to cover this (which also simplifies the
set_powered helper a lot).

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:49 +01:00
Johan Hedberg bf943cbf76 Bluetooth: Move fast connectable code to hci_request.c
We'll soon need this both in hci_request.c and mgmt.c so move it to
hci_request.c as a generic helper.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:48 +01:00
Johan Hedberg b1a8917c9b Bluetooth: Move EIR update to hci_request.c
We'll soon need to update the EIR both from hci_request.c and mgmt.c
so move update_eir() as a more generic request helper to
hci_request.c.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:48 +01:00
Johan Hedberg 00cf5040b3 Bluetooth: HCI name update to hci_request.c
We'll soon need this both from hci_request.c and mgmt.c so move it as
a request helper function to hci_request.c.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:48 +01:00
Johan Hedberg c366f555b8 Bluetooth: Move discoverable timeout behind hdev->req_workqueue
Since the other discoverable changes are behind req_workqueue now it
only makes sense to move the discoverable timeout there as well.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:48 +01:00
Johan Hedberg aed1a8851d Bluetooth: Move discoverable changes to hdev->req_workqueue
The discoverable mode is intrinsically linked with the connectable
mode e.g. through sharing the same HCI command (Write Scan Enable) for
BR/EDR. It makes therefore sense to move it to hci_request.c and run
the changes through the same hdev->req_workqueue.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:48 +01:00
Johan Hedberg 14bf5eac7a Bluetooth: Perform Class of Device changes through hdev->req_workqueue
The Class of Device needs to be changed e.g. for limited discoverable
mode. In preparation of moving the discoverable mode to hci_request.c
and hdev->req_workqueue, move the Class of Device helpers there first.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:48 +01:00
Johan Hedberg 53c0ba7451 Bluetooth: Move connectable changes to hdev->req_workqueue
This way the connectable changes are synchronized against each other,
which helps avoid potential races. The connectable mode is also linked
together with LE advertising which makes is more convenient to have it
behind the same workqueue.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:48 +01:00
Johan Hedberg f22525700b Bluetooth: Move advertising instance management to hci_request.c
This paves the way for eventually performing advertising changes
through the hdev->req_workqueue. Some new APIs need to be exposed from
mgmt.c to hci_request.c and vice-versa, but many of them will go away
once hdev->req_workqueue gets used.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:47 +01:00
Johan Hedberg 196a5e97d1 Bluetooth: Move __hci_update_background_scan up in hci_request.c
This way we avoid the need to do a forward declaration in later
patches.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:47 +01:00
Johan Hedberg 01b1cb87d3 Bluetooth: Run page scan updates through hdev->req_workqueue
Since Add/Remove Device perform the page scan updates independently
from the HCI command completion we've introduced a potential race when
multiple mgmt commands are queued. Doing the page scan updates through
the req_workqueue ensures that the state changes are performed in a
race-free manner.

At the same time, to make the request helper more widely usable,
extend it to also cover Inquiry Scan changes since those are behind
the same HCI command. This is also reflected in the new name of the
API as well as the work struct name.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:47 +01:00
David S. Miller f188b951f3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/renesas/ravb_main.c
	kernel/bpf/syscall.c
	net/ipv4/ipmr.c

All three conflicts were cases of overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 21:09:12 -05:00
David S. Miller 79aecc7216 Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Johan Hedberg says:

====================
pull request: bluetooth 2015-12-01

Here's a Bluetooth fix for the 4.4-rc series that fixes a memory leak of
the Security Manager L2CAP channel that'll happen for every LE
connection.

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 12:04:05 -05:00
Eric Dumazet 9cd3e072b0 net: rename SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA
This patch is a cleanup to make following patch easier to
review.

Goal is to move SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA
from (struct socket)->flags to a (struct socket_wq)->flags
to benefit from RCU protection in sock_wake_async()

To ease backports, we rename both constants.

Two new helpers, sk_set_bit(int nr, struct sock *sk)
and sk_clear_bit(int net, struct sock *sk) are added so that
following patch can change their implementation.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-01 15:45:05 -05:00