Commit Graph

74 Commits

Author SHA1 Message Date
Masahiro Yamada a7f7f6248d treewide: replace '---help---' in Kconfig files with 'help'
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-14 01:57:21 +09:00
Linus Torvalds ff2ae607c6 SPDX patches for 5.7-rc1.
Here are 3 SPDX patches for 5.7-rc1.
 
 One fixes up the SPDX tag for a single driver, while the other two go
 through the tree and add SPDX tags for all of the .gitignore files as
 needed.
 
 Nothing too complex, but you will get a merge conflict with your current
 tree, that should be trivial to handle (one file modified by two things,
 one file deleted.)
 
 All 3 of these have been in linux-next for a while, with no reported
 issues other than the merge conflict.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodg5A8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykySQCgy9YDrkz7nWq6v3Gohl6+lW/L+rMAnRM4uTZm
 m5AuCzO3Azt9KBi7NL+L
 =2Lm5
 -----END PGP SIGNATURE-----

Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

Pull SPDX updates from Greg KH:
 "Here are three SPDX patches for 5.7-rc1.

  One fixes up the SPDX tag for a single driver, while the other two go
  through the tree and add SPDX tags for all of the .gitignore files as
  needed.

  Nothing too complex, but you will get a merge conflict with your
  current tree, that should be trivial to handle (one file modified by
  two things, one file deleted.)

  All three of these have been in linux-next for a while, with no
  reported issues other than the merge conflict"

* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  ASoC: MT6660: make spdxcheck.py happy
  .gitignore: add SPDX License Identifier
  .gitignore: remove too obvious comments
2020-04-03 13:12:26 -07:00
Masahiro Yamada d198b34f38 .gitignore: add SPDX License Identifier
Add SPDX License Identifier to all .gitignore files.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25 11:50:48 +01:00
Gustavo A. R. Silva 573a73abc3 zorro: Replace zero-length array with flexible-array member
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20200227183748.GA31018@embeddedor
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2020-03-09 11:12:19 +01:00
Geert Uytterhoeven 7332bc4dc8 zorro: Move zorro_bus_type to bus-private header file
zorro_bus_type was never used outside the Zorro bus code.  Hence move it
from the public to the bus-private header file.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20200112164949.20196-6-geert@linux-m68k.org
2020-03-09 11:12:19 +01:00
Geert Uytterhoeven 3d52910e2b zorro: Use zorro_match_device() helper in zorro_bus_match()
Make zorro_bus_match() use the existing zorro_match_device() helper,
instead of open-coding the same operation.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20200112164949.20196-4-geert@linux-m68k.org
2020-03-09 11:12:19 +01:00
Geert Uytterhoeven aeee094d95 zorro: Fix zorro_bus_match() kerneldoc
The kerneldoc for zorro_bus_match() was obviously copied from
zorro_match_device(), but wasnt't updated for the different calling
context and semantics.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20200112164949.20196-3-geert@linux-m68k.org
2020-03-09 11:12:19 +01:00
Geert Uytterhoeven 0cfb07c5f2 zorro: Make zorro_match_device() static
Unlike its PCI counterpart, zorro_match_device() was never used outside
the Zorro bus code.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20200112164949.20196-2-geert@linux-m68k.org
2020-03-09 11:12:19 +01:00
Linus Torvalds 89a47dd1af Kbuild updates for v5.6 (2nd)
- fix randconfig to generate a sane .config
 
  - rename hostprogs-y / always to hostprogs / always-y, which are
    more natual syntax.
 
  - optimize scripts/kallsyms
 
  - fix yes2modconfig and mod2yesconfig
 
  - make multiple directory targets ('make foo/ bar/') work
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl47NfMVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGRGwP/3AHO8P0wGEeFKs3ziSMjs2W7/Pj
 lN08Kuxm0u3LnyEEcHVUveoi+xBYqvrw0RsGgYf5S8q0Mpep7MPqbfkDUxV/0Zkj
 QP2CsvOTbjdBjH7q3ojkwLcDl0Pxu9mg3eZMRXZ2WQeNXuMRw6Bicoh7ElvB1Bv/
 HC+j30i2Me3cf/riQGSAsstvlXyIR8RaerR8PfRGESTysiiN76+JcHTatJHhOJL9
 O6XKkzo8/CXMYKKVF4Ae4NP+WFg6E96/pAPx0Rf47RbPX9UG35L9rkzTDnk70Ms6
 OhKiu3hXsRX7mkqApuoTqjge4+iiQcKZxYmMXU1vGlIRzjwg19/4YFP6pDSCcnIu
 kKb8KN4o4N41N7MFS3OLZWwISA8Vw6RbtwDZ3AghDWb7EHb9oNW42mGfcAPr1+wZ
 /KH6RHTzaz+5q2MgyMY1NhADFrhIT9CvDM+UJECgbokblnw7PHAnPmbsuVak9ZOH
 u9ojO1HpTTuIYO6N6v4K5zQBZF1N+RvkmBnhHd8j6SksppsCoC/G62QxgXhF2YK3
 FQMpATCpuyengLxWAmPEjsyyPOlrrdu9UxqNsXVy5ol40+7zpxuHwKcQKCa9urJR
 rcpbIwLaBcLhHU4BmvBxUk5aZxxGV2F0O0gXTOAbT2xhd6BipZSMhUmN49SErhQm
 NC/coUmQX7McxMXh
 =sv4U
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

 - fix randconfig to generate a sane .config

 - rename hostprogs-y / always to hostprogs / always-y, which are more
   natual syntax.

 - optimize scripts/kallsyms

 - fix yes2modconfig and mod2yesconfig

 - make multiple directory targets ('make foo/ bar/') work

* tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: make multiple directory targets work
  kconfig: Invalidate all symbols after changing to y or m.
  kallsyms: fix type of kallsyms_token_table[]
  scripts/kallsyms: change table to store (strcut sym_entry *)
  scripts/kallsyms: rename local variables in read_symbol()
  kbuild: rename hostprogs-y/always to hostprogs/always-y
  kbuild: fix the document to use extra-y for vmlinux.lds
  kconfig: fix broken dependency in randconfig-generated .config
2020-02-09 16:05:50 -08:00
Alexey Dobriyan 97a32539b9 proc: convert everything to "struct proc_ops"
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in
seq_file.h.

Conversion rule is:

	llseek		=> proc_lseek
	unlocked_ioctl	=> proc_ioctl

	xxx		=> proc_xxx

	delete ".owner = THIS_MODULE" line

[akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c]
[sfr@canb.auug.org.au: fix kernel/sched/psi.c]
  Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au
Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-04 03:05:26 +00:00
Masahiro Yamada 5f2fb52fac kbuild: rename hostprogs-y/always to hostprogs/always-y
In old days, the "host-progs" syntax was used for specifying host
programs. It was renamed to the current "hostprogs-y" in 2004.

It is typically useful in scripts/Makefile because it allows Kbuild to
selectively compile host programs based on the kernel configuration.

This commit renames like follows:

  always       ->  always-y
  hostprogs-y  ->  hostprogs

So, scripts/Makefile will look like this:

  always-$(CONFIG_BUILD_BIN2C) += ...
  always-$(CONFIG_KALLSYMS)    += ...
      ...
  hostprogs := $(always-y) $(always-m)

I think this makes more sense because a host program is always a host
program, irrespective of the kernel configuration. We want to specify
which ones to compile by CONFIG options, so always-y will be handier.

The "always", "hostprogs-y", "hostprogs-m" will be kept for backward
compatibility for a while.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-04 01:53:07 +09:00
Thomas Gleixner ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Linus Torvalds 2857676045 - Introduce arithmetic overflow test helper functions (Rasmus)
- Use overflow helpers in 2-factor allocators (Kees, Rasmus)
 - Introduce overflow test module (Rasmus, Kees)
 - Introduce saturating size helper functions (Matthew, Kees)
 - Treewide use of struct_size() for allocators (Kees)
 -----BEGIN PGP SIGNATURE-----
 Comment: Kees Cook <kees@outflux.net>
 
 iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAlsYJ1gWHGtlZXNjb29r
 QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJlCTEACwdEeriAd2VwxknnsstojGD/3g
 8TTFA19vSu4Gxa6WiDkjGoSmIlfhXTlZo1Nlmencv16ytSvIVDNLUIB3uDxUIv1J
 2+dyHML9JpXYHHR7zLXXnGFJL0wazqjbsD3NYQgXqmun7EVVYnOsAlBZ7h/Lwiej
 jzEJd8DaHT3TA586uD3uggiFvQU0yVyvkDCDONIytmQx+BdtGdg9TYCzkBJaXuDZ
 YIthyKDvxIw5nh/UaG3L+SKo73tUr371uAWgAfqoaGQQCWe+mxnWL4HkCKsjFzZL
 u9ouxxF/n6pij3E8n6rb0i2fCzlsTDdDF+aqV1rQ4I4hVXCFPpHUZgjDPvBWbj7A
 m6AfRHVNnOgI8HGKqBGOfViV+2kCHlYeQh3pPW33dWzy/4d/uq9NIHKxE63LH+S4
 bY3oO2ela8oxRyvEgXLjqmRYGW1LB/ZU7FS6Rkx2gRzo4k8Rv+8K/KzUHfFVRX61
 jEbiPLzko0xL9D53kcEn0c+BhofK5jgeSWxItdmfuKjLTW4jWhLRlU+bcUXb6kSS
 S3G6aF+L+foSUwoq63AS8QxCuabuhreJSB+BmcGUyjthCbK/0WjXYC6W/IJiRfBa
 3ZTxBC/2vP3uq/AGRNh5YZoxHL8mSxDfn62F+2cqlJTTKR/O+KyDb1cusyvk3H04
 KCDVLYPxwQQqK1Mqig==
 =/3L8
 -----END PGP SIGNATURE-----

Merge tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull overflow updates from Kees Cook:
 "This adds the new overflow checking helpers and adds them to the
  2-factor argument allocators. And this adds the saturating size
  helpers and does a treewide replacement for the struct_size() usage.
  Additionally this adds the overflow testing modules to make sure
  everything works.

  I'm still working on the treewide replacements for allocators with
  "simple" multiplied arguments:

     *alloc(a * b, ...) -> *alloc_array(a, b, ...)

  and

     *zalloc(a * b, ...) -> *calloc(a, b, ...)

  as well as the more complex cases, but that's separable from this
  portion of the series. I expect to have the rest sent before -rc1
  closes; there are a lot of messy cases to clean up.

  Summary:

   - Introduce arithmetic overflow test helper functions (Rasmus)

   - Use overflow helpers in 2-factor allocators (Kees, Rasmus)

   - Introduce overflow test module (Rasmus, Kees)

   - Introduce saturating size helper functions (Matthew, Kees)

   - Treewide use of struct_size() for allocators (Kees)"

* tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  treewide: Use struct_size() for devm_kmalloc() and friends
  treewide: Use struct_size() for vmalloc()-family
  treewide: Use struct_size() for kmalloc()-family
  device: Use overflow helpers for devm_kmalloc()
  mm: Use overflow helpers in kvmalloc()
  mm: Use overflow helpers in kmalloc_array*()
  test_overflow: Add memory allocation overflow tests
  overflow.h: Add allocation size calculation helpers
  test_overflow: Report test failures
  test_overflow: macrofy some more, do more tests for free
  lib: add runtime test of check_*_overflow functions
  compiler.h: enable builtin overflow checkers and add fallback code
2018-06-06 17:27:14 -07:00
Kees Cook acafe7e302 treewide: Use struct_size() for kmalloc()-family
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
    int stuff;
    void *entry[];
};

instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);

This patch makes the changes for kmalloc()-family (and kvmalloc()-family)
uses. It was done via automatic conversion with manual review for the
"CHECKME" non-standard cases noted below, using the following Coccinelle
script:

// pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len *
//                      sizeof *pkey_cache->table, GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@

- alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)

// mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@

- alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)

// Same pattern, but can't trivially locate the trailing element name,
// or variable name.
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
expression SOMETHING, COUNT, ELEMENT;
@@

- alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP)
+ alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-06 11:15:43 -07:00
Linus Torvalds 137f5ae4da m68k updates for 4.18
- A few time-related fixes:
       - off-by-one calendar month on some classes of machines,
       - Y2038 preparation,
   - Build fix for ndelay() being called with a 64-bit type,
   - Revive 64-bit get_user(), which is used by some Android code,
   - Defconfig updates,
   - Fix for a long-standing fatal bug in iounmap() on '020/030, which
     was actually fixed in 2.4.23, but never in 2.5.x and later,
   - Default DMA mask to avoid warning splats,
   - Minor fixes and cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iF4EABYIAAYFAlsU83oACgkQisJQ/WRJ8XC+tAD/TC++gQlSUbz5ZSjZ95aGZl1O
 nHjOHQpnae/R9pNFjogA/imtboTg7ukyx9Qnv7q47G8w7wGyxS+QHVTa6Hr2tEEF
 =8PWk
 -----END PGP SIGNATURE-----

Merge tag 'm68k-for-v4.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k

Pull m68k updates from Geert Uytterhoeven:

 - a few time-related fixes:
     - off-by-one calendar month on some classes of machines
     - Y2038 preparation

 - build fix for ndelay() being called with a 64-bit type

 - revive 64-bit get_user(), which is used by some Android code

 - defconfig updates

 - fix for a long-standing fatal bug in iounmap() on '020/030, which was
   actually fixed in 2.4.23, but never in 2.5.x and later

 - default DMA mask to avoid warning splats

 - minor fixes and cleanups

* tag 'm68k-for-v4.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Set default dma mask for platform devices
  m68k/mm: Adjust VM area to be unmapped by gap size for __iounmap()
  m68k/defconfig: Update defconfigs for v4.17-rc3
  m68k/uaccess: Revive 64-bit get_user()
  m68k: Implement ndelay() as an inline function to force type checking/casting
  zorro: Add a blank line after declarations
  m68k: Use read_persistent_clock64() consistently
  m68k: Fix off-by-one calendar month
  m68k: Fix style, spelling, and grammar in siginfo_build_tests()
  m68k/mac: Fix SWIM memory resource end address
2018-06-04 15:50:22 -07:00
Jacob d49cbe73be zorro: Add a blank line after declarations
Fixes a coding style issue.

Signed-off-by: Jacob Enders <jacobenders1@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2018-05-22 10:31:51 +02:00
Christoph Hellwig fddda2b7b5 proc: introduce proc_create_seq{,_data}
Variants of proc_create{,_data} that directly take a struct seq_operations
argument and drastically reduces the boilerplate code in the callers.

All trivial callers converted over.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-16 07:23:35 +02:00
Michael Schmitz 55496d3fe2 zorro: Set up z->dev.dma_mask for the DMA API
The generic DMA API uses dev->dma_mask to check the DMA addressable
memory bitmask, and warns if no mask is set or even allocated.

Set z->dev.dma_coherent_mask on Zorro bus scan, and make z->dev.dma_mask
to point to z->dev.dma_coherent_mask so device drivers that need DMA have
everything set up to avoid warnings from dma_alloc_coherent(). Drivers can
still use dma_set_mask_and_coherent() to explicitly set their DMA bit mask.

Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
[geert: Handle Zorro II with 24-bit address space]
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2018-03-19 10:26:46 +01:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Dmitry Torokhov 87e715deb8 zorro: stop creating attributes by hand
Instead of creating attributes one by one, define attribute_group array
and attach it to bus->dev_groups, so that all needed attributes are created
automatically when a new device is registered on the bus.

Also switch to using standard DEVICE_ATTR_RO() macros.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17 15:10:49 +09:00
Linus Torvalds 7c0f6ba682 Replace <asm/uaccess.h> with <linux/uaccess.h> globally
This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-24 11:46:01 -08:00
Geliang Tang a9c9d9aca4 zorro: Use kobj_to_dev()
Use kobj_to_dev() instead of open-coding it.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2016-01-25 09:42:23 +01:00
Wolfram Sang 467817edc5 zorro: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:21:57 +02:00
Himangi Saraogi 0b9d22dc57 zorro: Use ARRAY_SIZE
ARRAY_SIZE is more concise to use when the size of an array is divided
by the size of its type or the size of its first element.

The Coccinelle semantic patch that makes this change is as follows:

// <smpl>
@@
type T;
T[] E;
@@

- (sizeof(E)/sizeof(T))
+ ARRAY_SIZE(E)
// </smpl>

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
[Geert: Also convert the MANUF definition]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2014-07-11 10:38:02 +02:00
Geert Uytterhoeven bd9ba8f40e zorro/UAPI: Use proper types (endianness/size) in <linux/zorro.h>
Fix member definitions for non-native userspace handling:
  - All multi-byte values are big-endian, hence use __be*,
  - All pointers are 32-bit pointers under AmigaOS, but unused (except for
    cd_BoardAddr) under Linux, hence use __be32.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-11-26 11:09:09 +01:00
Geert Uytterhoeven 83b7bce3d3 zorro: Let the driver core handle device enumeration
Filling in dev_name of the Zorro bus type and dev.id of each device allows
the driver core to enumerate devices, so we don't have to do that
ourselves.

This changes the names of devices in sysfs from "%02x" to "zorro%u".

Note that filling in dev.id is also needed to support MFD Zorro devices.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-11-26 11:09:06 +01:00
Geert Uytterhoeven 52182c758f zorro: Refactor conditional handling of Zorro device name database
Using an empty static inline function in the CONFIG_ZORRO_NAMES=n case
allows to drop compilation of names.c.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-11-26 11:09:06 +01:00
Geert Uytterhoeven bd79014cd4 zorro: Don't fill in dummy names in zorro_name_device()
If the device is not found in the database, it's not needed to fill in
a dummy name. The caller of zorro_name_device() has already taken care
of that to support CONFIG_ZORRO_NAMES=n.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-11-26 11:09:05 +01:00
Geert Uytterhoeven c293738e6d zorro: Do not allocate zorro_autocon[] statically
Currently the array of Zorro devices is allocated statically, wasting
up to 4.5 KiB when running an Amiga or multi-platform kernel on a machine
with no or a handful of Zorro expansion cards. Convert it to conditional
dynamic memory allocation to fix this.

amiga_parse_bootinfo() still needs to store some information about the
detected Zorro devices, at a time even the bootmem allocator is not yet
available.  This is now handled using a much smaller array (typically less
than 0.5 KiB), which is __initdata and thus freed later.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-11-26 11:09:03 +01:00
Al Viro 3be1f2b81f zorro: switch to fixed_size_llseek()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29 12:57:28 +04:00
David Howells 271a15eabe proc: Supply PDE attribute setting accessor functions
Supply accessor functions to set attributes in proc_dir_entry structs.

The following are supplied: proc_set_size() and proc_set_user().

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
cc: linuxppc-dev@lists.ozlabs.org
cc: linux-media@vger.kernel.org
cc: netdev@vger.kernel.org
cc: linux-wireless@vger.kernel.org
cc: linux-pci@vger.kernel.org
cc: netfilter-devel@vger.kernel.org
cc: alsa-devel@alsa-project.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-01 17:29:18 -04:00
Al Viro d9dda78bad procfs: new helper - PDE_DATA(inode)
The only part of proc_dir_entry the code outside of fs/proc
really cares about is PDE(inode)->data.  Provide a helper
for that; static inline for now, eventually will be moved
to fs/proc, along with the knowledge of struct proc_dir_entry
layout.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:13:32 -04:00
Al Viro 496ad9aa8e new helper: file_inode(file)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22 23:31:31 -05:00
Greg Kroah-Hartman b92c914d02 Drivers: zorro: remove CONFIG_HOTPLUG usage
CONFIG_HOTPLUG is going away as an option, so remove it from the
zorro-driver.c file.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:01 -08:00
Geert Uytterhoeven 897f3325a1 zorro: Remove unused zorro_bus.devices
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-07-15 19:56:38 +02:00
Al Viro d36b691077 misc latin1 to utf8 conversions
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-02 13:04:55 +01:00
Paul Gortmaker 8aaf7a0e37 drivers/zorro: Add export.h to proc.c
To fix what used to be the implicit presence of the macros
EXPORT_SYMBOL and THIS_MODULE, via module.h being everywhere.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:32:01 -04:00
Jim Rotmalm d996e9dc45 zorro: Fix four checkpatch warnings
zorro-driver.c: fix four checkpatch warnings of:
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable

I had a cat. The cat was mine.
His name was Zorro. Amiga is fine.

Signed-off-by: Jim Rotmalm <jim.rotmalm@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-10-24 21:00:34 +02:00
Geert Uytterhoeven a7f4d00a82 zorro: Defer device_register() until all devices have been identified
As the Amiga Zorro II address space is limited to 8.5 MiB and Zorro
devices can contain only one BAR, several Amiga Zorro II expansion
boards (mainly graphics cards) contain multiple Zorro devices: a small
one for the control registers and one (or more) for the graphics memory.

The conversion of cirrusfb to the new driver framework introduced a
regression: the driver contains a zorro_driver for the first Zorro
device, and uses the (old) zorro_find_device() call to find the second
Zorro device.

However, as the Zorro core calls device_register() as soon as a Zorro
device is identified, it may not have identified the second Zorro device
belonging to the same physical Zorro expansion card.  Hence cirrusfb
could no longer find the second part of the Picasso II graphics card,
causing a NULL pointer dereference.

Defer the registration of Zorro devices with the driver framework until
all Zorro devices have been identified to fix this.

Note that the alternative solution (modifying cirrusfb to register a
zorro_driver for all Zorro devices belonging to a graphics card, instead
of only for the first one, and adding a synchronization mechanism to
defer initialization until all have been found), is not an option, as on
some cards one device may be optional (e.g.  the second bank of 2 MiB of
graphics memory on the Picasso IV in Zorro II mode).

Reported-by: Ingo Jürgensmann <ij@2011.bluespice.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-22 12:59:35 -07:00
Arnd Bergmann 451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Vasiliy Kulikov 10b68799b3 zorro: Fix device_register() error handling
If device_register() fails then call put_device().
See comment to device_register.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-10-22 09:43:25 +02:00
Geert Uytterhoeven 2190a1e770 zorro: Fix reading of proc/bus/zorro/* in small chunks
proc_bus_zorro_read() didn't take into account the current file position,
hence it always read from the start of the ConfigDev.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-08-09 21:14:08 +02:00
Geert Uytterhoeven d50ac468dd zorro: BKL removal
Remove BKL use from proc_bus_zorro_lseek(), like was done for
proc_bus_pci_lseek() a long time ago.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-08-09 21:14:08 +02:00
Chris Wright 2c3c8bea60 sysfs: add struct file* to bin_attr callbacks
This allows bin_attr->read,write,mmap callbacks to check file specific data
(such as inode owner) as part of any privilege validation.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:31 -07:00
Geert Uytterhoeven 0d305464ae m68k: amiga - Zorro host bridge platform device conversion
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-05-17 21:37:42 +02:00
Geert Uytterhoeven bf54a2b3c0 m68k: amiga - Zorro bus modalias support
Add Amiga Zorro bus modalias and uevent support

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-05-17 21:37:41 +02:00
Uwe Kleine-König dfff0615d2 tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-15 15:38:10 +01:00
Stephen Rothwell f699b7f351 m68k: don't export static inline functions
These now cause errors due to changes present in linux-next:

(__ksymtab_sorted+0x1258): undefined reference to `dio_dev_driver'
(__ksymtab_sorted+0x4d48): undefined reference to `zorro_dev_driver'

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-12-06 11:18:28 +01:00
Kay Sievers 2796872c40 zorro: struct device - replace bus_id with dev_name(), dev_set_name()
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-03-24 16:38:21 -07:00
Geert Uytterhoeven b01e3b07ec m68k: zorro - Use %pR to print resources
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12 20:56:43 +01:00