Commit Graph

181 Commits

Author SHA1 Message Date
Christoph Hellwig 6869875fbc block: remove the bi_seg_{front,back}_size fields in struct bio
At this point these fields aren't used for anything, so we can remove
them.

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-23 10:25:26 -06:00
Christoph Hellwig 200a9aff7b block: remove the segment size check in bio_will_gap
We fundamentally do not have a maximum segement size for devices with a
virt boundary.  So don't bother checking it, especially given that the
existing checks didn't properly work to start with as we never fully
update the front/back segment size and miss the bi_seg_front_size that
wuld have been required for some cases.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-23 10:25:26 -06:00
Christoph Hellwig eded341c08 block: don't decrement nr_phys_segments for physically contigous segments
Currently ll_merge_requests_fn, unlike all other merge functions,
reduces nr_phys_segments by one if the last segment of the previous,
and the first segment of the next segement are contigous.  While this
seems like a nice solution to avoid building smaller than possible
requests it causes a mismatch between the segments actually present
in the request and those iterated over by the bvec iterators, including
__rq_for_each_bio.  This can for example mistrigger the single segment
optimization in the nvme-pci driver, and might lead to mismatching
nr_phys_segments number when recalculating the number of request
when inserting a cloned request.

We could possibly work around this by making the bvec iterators take
the front and back segment size into account, but that would require
moving them from the bio to the bio_iter and spreading this mess
over all users of bvecs.  Or we could simply remove this optimization
under the assumption that most users already build good enough bvecs,
and that the bio merge patch never cared about this optimization
either.  The latter is what this patch does.

dff824b2aa ("nvme-pci: optimize mapping of small single segment requests").
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-23 10:25:26 -06:00
Christoph Hellwig f9f76879bc block: avoid scatterlist offsets > PAGE_SIZE
While we generally allow scatterlists to have offsets larger than page
size for an entry, and other subsystems like the crypto code make use of
that, the block layer isn't quite ready for that.  Flip the switch back
to avoid them for now, and revisit that decision early in a merge window
once the known offenders are fixed.

Fixes: 8a96a0e408 ("block: rewrite blk_bvec_map_sg to avoid a nth_page call")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-22 09:48:12 -06:00
Christoph Hellwig 8a96a0e408 block: rewrite blk_bvec_map_sg to avoid a nth_page call
The offset in scatterlists is allowed to be larger than the page size,
so don't go to great length to avoid that case and simplify the
arithmetics.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-12 09:06:36 -06:00
Ming Lei b21e11c5c8 block: fix build warning in merging bvecs
Commit f6970f83ef ("block: don't check if adjacent bvecs in one bio can
be mergeable") changes bvec merge by only considering two bvecs from
different bios. However, if the former bio doesn't inlcude any io bvec,
then the following warning may be triggered:

 warning: ‘bvec.bv_offset’ may be used uninitialized in this function [-Wmaybe-uninitialized]

In practice, it shouldn't be triggered.

Fixes it by adding check on former bio, the check shouldn't add any cost
given 'bio->bi_iter' can be hit in cache.

Reported-by: Jens Axboe <axboe@kernel.dk>
Fixes: f6970f83ef ("block: don't check if adjacent bvecs in one bio can be mergeable")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-08 10:57:10 -06:00
Ming Lei f6970f83ef block: don't check if adjacent bvecs in one bio can be mergeable
Now both passthrough and FS IO have supported multi-page bvec, and
bvec merging has been handled actually when adding page to bio, then
adjacent bvecs won't be mergeable any more if they belong to same bio.

So only try to merge bvecs if they are from different bios.

Cc: Omar Sandoval <osandov@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-01 12:11:48 -06:00
Ming Lei 16e3e41877 block: reuse __blk_bvec_map_sg() for mapping page sized bvec
Inside __blk_segment_map_sg(), page sized bvec mapping is optimized
a bit with one standalone branch.

So reuse __blk_bvec_map_sg() to do that.

Cc: Omar Sandoval <osandov@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-01 12:11:48 -06:00
Ming Lei cae6c2e54c block: remove argument of 'request_queue' from __blk_bvec_map_sg
The argument of 'request_queue' isn't used by __blk_bvec_map_sg(),
so remove it.

Cc: Omar Sandoval <osandov@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-01 12:11:48 -06:00
Ming Lei fd7d8d4232 block: don't merge adjacent bvecs to one segment in bio blk_queue_split
For normal filesystem IO, each page is added via blk_add_page(),
in which bvec(page) merge has been handled already, and basically
not possible to merge two adjacent bvecs in one bio.

So not try to merge two adjacent bvecs in blk_queue_split().

Cc: Omar Sandoval <osandov@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-01 12:11:21 -06:00
Ming Lei 05b700ba60 block: fix segment calculation for passthrough IO
blk_recount_segments() can be called in bio_add_pc_page() for
calculating how many segments this bio will has after one page is added
to this bio. If the resulted segment number is beyond the queue limit,
the added page will be removed.

The try-and-fix policy requires blk_recount_segments(__blk_recalc_rq_segments)
to not consider the segment number limit. Unfortunately bvec_split_segs()
does check this limit, and causes small segment number returned to
bio_add_pc_page(), then page still may be added to the bio even though
segment number limit becomes broken.

Fixes this issue by not considering segment number limit when calcualting
bio's segment number.

Fixes: dcebd75592 ("block: use bio_for_each_bvec() to compute multi-page bvec count")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-06 09:42:54 -07:00
Ming Lei aaeee62c84 block: fix updating bio's front segment size
When the current bvec can be merged to the 1st segment, the bio's front
segment size has to be updated.

However, dcebd75592 doesn't consider that case, then bio's front
segment size may not be correct.

This patch fixes this issue.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Omar Sandoval <osandov@fb.com>
Fixes: dcebd75592 ("block: use bio_for_each_bvec() to compute multi-page bvec count")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-02 12:45:37 -07:00
Ming Lei bbcbbd567c block: optimize blk_bio_segment_split for single-page bvec
Introduce a fast path for single-page bvec IO, then we can avoid
to call bvec_split_segs() unnecessarily.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-27 06:18:55 -07:00
Ming Lei 48d7727cae block: optimize __blk_segment_map_sg() for single-page bvec
Introduce a fast path for single-page bvec IO, then blk_bvec_map_sg()
can be avoided.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-27 06:18:54 -07:00
Ming Lei 4d633062c1 block: introduce bvec_nth_page()
Single-page bvec can often be seen in small BS workloads, so
introduce bvec_nth_page() for avoiding to call nth_page() unnecessarily,
which looks not cheap.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-27 06:18:52 -07:00
Ming Lei 49b1f22b56 block: avoid to READ fields of null bio
rq->bio can be NULL sometimes, such as flush request, so don't
read bio->bi_seg_front_size until this 'bio' is checked as valid.

Cc: Bart Van Assche <bvanassche@acm.org>
Reported-by: Bart Van Assche <bvanassche@acm.org>
Fixes: dcebd75592 ("block: use bio_for_each_bvec() to compute multi-page bvec count")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-19 09:19:06 -07:00
Ming Lei 2705c93742 block: kill QUEUE_FLAG_NO_SG_MERGE
Since bdced438ac ("block: setup bi_phys_segments after splitting"),
physical segment number is mainly figured out in blk_queue_split() for
fast path, and the flag of BIO_SEG_VALID is set there too.

Now only blk_recount_segments() and blk_recalc_rq_segments() use this
flag.

Basically blk_recount_segments() is bypassed in fast path given BIO_SEG_VALID
is set in blk_queue_split().

For another user of blk_recalc_rq_segments():

- run in partial completion branch of blk_update_request, which is an unusual case

- run in blk_cloned_rq_check_limits(), still not a big problem if the flag is killed
since dm-rq is the only user.

Multi-page bvec is enabled now, not doing S/G merging is rather pointless with the
current setup of the I/O path, as it isn't going to save you a significant amount
of cycles.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-15 08:40:12 -07:00
Ming Lei 862e5a5e6f block: use bio_for_each_bvec() to map sg
It is more efficient to use bio_for_each_bvec() to map sg, meantime
we have to consider splitting multipage bvec as done in blk_bio_segment_split().

Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-15 08:40:11 -07:00
Ming Lei dcebd75592 block: use bio_for_each_bvec() to compute multi-page bvec count
First it is more efficient to use bio_for_each_bvec() in both
blk_bio_segment_split() and __blk_recalc_rq_segments() to compute how
many multi-page bvecs there are in the bio.

Secondly once bio_for_each_bvec() is used, the bvec may need to be
splitted because its length can be very longer than max segment size,
so we have to split the big bvec into several segments.

Thirdly when splitting multi-page bvec into segments, the max segment
limit may be reached, so the bio split need to be considered under
this situation too.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-15 08:40:11 -07:00
Ming Lei 1a67356e9a block: don't use bio->bi_vcnt to figure out segment number
It is wrong to use bio->bi_vcnt to figure out how many segments
there are in the bio even though CLONED flag isn't set on this bio,
because this bio may be splitted or advanced.

So always use bio_segments() in blk_recount_segments(), and it shouldn't
cause any performance loss now because the physical segment number is figured
out in blk_queue_split() and BIO_SEG_VALID is set meantime since
bdced438ac ("block: setup bi_phys_segments after splitting").

Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 76d8137a31 ("blk-merge: recaculate segment if it isn't less than max segments")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-15 08:40:10 -07:00
Jens Axboe 947b7ac135 Revert "block: cover another queue enter recursion via BIO_QUEUE_ENTERED"
We can't touch a bio after ->make_request_fn(), for all we know it could
already have been completed by the time this function returns.

This reverts commit 698cef1739.

Reported-by: syzbot+4df6ca820108fd248943@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-27 06:35:28 -07:00
Ming Lei 698cef1739 block: cover another queue enter recursion via BIO_QUEUE_ENTERED
Except for blk_queue_split(), bio_split() is used for splitting bio too,
then the remained bio is often resubmit to queue via generic_make_request().
So the same queue enter recursion exits in this case too. Unfortunatley
commit cd4a4ae468 doesn't help this case.

This patch covers the above case by setting BIO_QUEUE_ENTERED before calling
q->make_request_fn.

In theory the per-bio flag is used to simulate one stack variable, it is
just fine to clear it after q->make_request_fn is returned. Especially
the same bio can't be submitted from another context.

Fixes: cd4a4ae468 ("block: don't use blocking queue entered for recursive bio submits")
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: NeilBrown <neilb@suse.com>
Reviewed-by:  Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-22 10:24:08 -07:00
Linus Torvalds 938edb8a31 SCSI misc on 20181224
This is mostly update of the usual drivers: smarpqi, lpfc, qedi,
 megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas.  Additionally, we have
 a pile of annotation, unused variable and minor updates.  The big API
 change is the updates for Christoph's DMA rework which include
 removing the DISABLE_CLUSTERING flag.  And finally there are a couple
 of target tree updates.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXCEUNiYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdjKAP9vrTTv
 qFaYmAoRSbPq9ZiixaXLMy0K/6o76Uay0gnBqgD/fgn3jg/KQ6alNaCjmfeV3wAj
 u1j3H7tha9j1it+4pUw=
 =GDa+
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: smarpqi, lpfc, qedi,
  megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas.

  Additionally, we have a pile of annotation, unused variable and minor
  updates.

  The big API change is the updates for Christoph's DMA rework which
  include removing the DISABLE_CLUSTERING flag.

  And finally there are a couple of target tree updates"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits)
  scsi: isci: request: mark expected switch fall-through
  scsi: isci: remote_node_context: mark expected switch fall-throughs
  scsi: isci: remote_device: Mark expected switch fall-throughs
  scsi: isci: phy: Mark expected switch fall-through
  scsi: iscsi: Capture iscsi debug messages using tracepoints
  scsi: myrb: Mark expected switch fall-throughs
  scsi: megaraid: fix out-of-bound array accesses
  scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through
  scsi: fcoe: remove set but not used variable 'port'
  scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown()
  scsi: smartpqi: fix build warnings
  scsi: smartpqi: update driver version
  scsi: smartpqi: add ofa support
  scsi: smartpqi: increase fw status register read timeout
  scsi: smartpqi: bump driver version
  scsi: smartpqi: add smp_utils support
  scsi: smartpqi: correct lun reset issues
  scsi: smartpqi: correct volume status
  scsi: smartpqi: do not offline disks for transient did no connect conditions
  scsi: smartpqi: allow for larger raid maps
  ...
2018-12-28 14:48:06 -08:00
Christoph Hellwig 38417468d4 scsi: block: remove the cluster flag
Now that the the SCSI layer replaced the use of the cluster flag with
segment size limits and the DMA boundary we can remove the cluster flag
from the block layer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18 23:39:26 -05:00
Christoph Hellwig 637b60ade3 block: remove the blk_recount_segments export
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-14 06:17:55 -07:00
Mikulas Patocka 5b18b5a737 block: delete part_round_stats and switch to less precise counting
We want to convert to per-cpu in_flight counters.

The function part_round_stats needs the in_flight counter every jiffy, it
would be too costly to sum all the percpu variables every jiffy, so it
must be deleted. part_round_stats is used to calculate two counters -
time_in_queue and io_ticks.

time_in_queue can be calculated without part_round_stats, by adding the
duration of the I/O when the I/O ends (the value is almost as exact as the
previously calculated value, except that time for in-progress I/Os is not
counted).

io_ticks can be approximated by increasing the value when I/O is started
or ended and the jiffies value has changed. If the I/Os take less than a
jiffy, the value is as exact as the previously calculated value. If the
I/Os take more than a jiffy, io_ticks can drift behind the previously
calculated value.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10 08:30:37 -07:00
Mike Snitzer 112f158f66 block: stop passing 'cpu' to all percpu stats methods
All of part_stat_* and related methods are used with preempt disabled,
so there is no need to pass cpu around to allow of them.  Just call
smp_processor_id() as needed.

Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10 08:30:37 -07:00
Jens Axboe 89d04ec349 Linux 4.20-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlwEZdIeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGAlQH/19oax2Za3IPqF4X
 DM3lal5M6zlUVkoYstqzpbR3MqUwgEnMfvoeMDC6mI9N4/+r2LkV7cRR8HzqQCCS
 jDfD69IzRGb52VSeJmbOrkxBWsR1Nn0t4Z3rEeLPxwaOoNpRc8H973MbAQ2FKMpY
 S4Y3jIK1dNiRRxdh52NupVkQF+djAUwkBuVk/rrvRJmTDij4la03cuCDAO+Di9lt
 GHlVvygKw2SJhDR+z3ArwZNmE0ceCcE6+W7zPHzj2KeWuKrZg22kfUD454f2YEIw
 FG0hu9qecgtpYCkLSm2vr4jQzmpsDoyq3ZfwhjGrP4qtvPC3Db3vL3dbQnkzUcJu
 JtwhVCE=
 =O1q1
 -----END PGP SIGNATURE-----

Merge tag 'v4.20-rc5' into for-4.21/block

Pull in v4.20-rc5, solving a conflict we'll otherwise get in aio.c and
also getting the merge fix that went into mainline that users are
hitting testing for-4.21/block and/or for-next.

* tag 'v4.20-rc5': (664 commits)
  Linux 4.20-rc5
  PCI: Fix incorrect value returned from pcie_get_speed_cap()
  MAINTAINERS: Update linux-mips mailing list address
  ocfs2: fix potential use after free
  mm/khugepaged: fix the xas_create_range() error path
  mm/khugepaged: collapse_shmem() do not crash on Compound
  mm/khugepaged: collapse_shmem() without freezing new_page
  mm/khugepaged: minor reorderings in collapse_shmem()
  mm/khugepaged: collapse_shmem() remember to clear holes
  mm/khugepaged: fix crashes due to misaccounted holes
  mm/khugepaged: collapse_shmem() stop if punched or truncated
  mm/huge_memory: fix lockdep complaint on 32-bit i_size_read()
  mm/huge_memory: splitting set mapping+index before unfreeze
  mm/huge_memory: rename freeze_page() to unmap_page()
  initramfs: clean old path before creating a hardlink
  kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace
  psi: make disabling/enabling easier for vendor kernels
  proc: fixup map_files test on arm
  debugobjects: avoid recursive calls with kmemleak
  userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set
  ...
2018-12-04 09:38:05 -07:00
Ming Lei 2a5cf35cd6 block: fix single range discard merge
There are actually two kinds of discard merge:

- one is the normal discard merge, just like normal read/write request,
and call it single-range discard

- another is the multi-range discard, queue_max_discard_segments(rq->q) > 1

For the former case, queue_max_discard_segments(rq->q) is 1, and we
should handle this kind of discard merge like the normal read/write
request.

This patch fixes the following kernel panic issue[1], which is caused by
not removing the single-range discard request from elevator queue.

Guangwu has one raid discard test case, in which this issue is a bit
easier to trigger, and I verified that this patch can fix the kernel
panic issue in Guangwu's test case.

[1] kernel panic log from Jens's report

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000148
 PGD 0 P4D 0.
 Oops: 0000 [#1] SMP PTI
 CPU: 37 PID: 763 Comm: kworker/37:1H Not tainted \
4.20.0-rc3-00649-ge64d9a554a91-dirty #14  Hardware name: Wiwynn \
Leopard-Orv2/Leopard-DDR BW, BIOS LBM08   03/03/2017       Workqueue: kblockd \
blk_mq_run_work_fn                                            RIP: \
0010:blk_mq_get_driver_tag+0x81/0x120                                       Code: 24 \
10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 00 00 00 \
0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 20 72 37 \
f6 87 b0 00 00 00 02  RSP: 0018:ffffc90004aabd30 EFLAGS: 00010246                     \
  RAX: 0000000000000003 RBX: ffff888465ea1300 RCX: ffffc90004aabde8
 RDX: 00000000ffffffff RSI: ffffc90004aabde8 RDI: 0000000000000000
 RBP: 0000000000000000 R08: ffff888465ea1348 R09: 0000000000000000
 R10: 0000000000001000 R11: 00000000ffffffff R12: ffff888465ea1300
 R13: 0000000000000000 R14: ffff888465ea1348 R15: ffff888465d10000
 FS:  0000000000000000(0000) GS:ffff88846f9c0000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000148 CR3: 000000000220a003 CR4: 00000000003606e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  blk_mq_dispatch_rq_list+0xec/0x480
  ? elv_rb_del+0x11/0x30
  blk_mq_do_dispatch_sched+0x6e/0xf0
  blk_mq_sched_dispatch_requests+0xfa/0x170
  __blk_mq_run_hw_queue+0x5f/0xe0
  process_one_work+0x154/0x350
  worker_thread+0x46/0x3c0
  kthread+0xf5/0x130
  ? process_one_work+0x350/0x350
  ? kthread_destroy_worker+0x50/0x50
  ret_from_fork+0x1f/0x30
 Modules linked in: sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel \
kvm switchtec irqbypass iTCO_wdt iTCO_vendor_support efivars cdc_ether usbnet mii \
cdc_acm i2c_i801 lpc_ich mfd_core ipmi_si ipmi_devintf ipmi_msghandler acpi_cpufreq \
button sch_fq_codel nfsd nfs_acl lockd grace auth_rpcgss oid_registry sunrpc nvme \
nvme_core fuse sg loop efivarfs autofs4  CR2: 0000000000000148                        \

 ---[ end trace 340a1fb996df1b9b ]---
 RIP: 0010:blk_mq_get_driver_tag+0x81/0x120
 Code: 24 10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 \
00 00 00 0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 \
20 72 37 f6 87 b0 00 00 00 02

Fixes: 445251d0f4 ("blk-mq: fix discard merge with scheduler attached")
Reported-by: Jens Axboe <axboe@kernel.dk>
Cc: Guangwu Zhang <guazhang@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-30 10:07:57 -07:00
Damien Le Moal 668ffc0341 block: prevent merging of requests with different priorities
Growing in size a high priority request by merging it with a lower
priority BIO or request will increase the request execution time. This
is the opposite result of the desired effect of high I/O priorities,
namely getting low I/O latencies. Prevent merging of requests and BIOs
that have different I/O priorities to fix this.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-19 19:03:49 -07:00
Jens Axboe a78b03bc73 Linux 4.20-rc3
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlvx2sAeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGycgIAIuxobwt0RRKa0zO
 ROS+34JGoC2yU2P9VdEGWdtxS6ANMVQgKPBhWL6s+xR89Kd+V4xSdJLD1pNTxxqP
 0DCva0np1/Q4juH+JbU50v/lykoLgteZ0P0LBRGf1y8p3WiLPv45IbnNsMDNYhB2
 7a8rOmZYakRY9CPznRDw3X8cJt3sddKgFJHIOGz1OQJVWtCD0KPGcJmQNsbDSagY
 Zx6Z5BKSIdjRqaAdN5gDa1Pft3WQo7TpaQGl80lSsgr5LcjmscXA3sClOCy+25Mo
 FZLx0PcwP+Efq8RTGzNK51WSOMa6d37hvjDqUAdQBOR0KbyjRyXQwyQVw/MGbPJs
 7J3Pzm0=
 =56Mt
 -----END PGP SIGNATURE-----

Merge tag 'v4.20-rc3' into for-4.21/block

Merge in -rc3 to resolve a few conflicts, but also to get a few
important fixes that have gone into mainline since the block
4.21 branch was forked off (most notably the SCSI queue issue,
which is both a conflict AND needed fix).

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-18 15:46:03 -07:00
Eric Biggers e96c0d8336 block: make blk_try_req_merge() static
blk_try_req_merge() is only used in block/blk-merge.c, so make it
static.

This addresses a gcc warning when -Wmissing-prototypes is enabled.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-14 18:49:38 -07:00
Ming Lei 1adfc5e413 block: make sure discard bio is aligned with logical block size
Obviously the created discard bio has to be aligned with logical block size.

This patch introduces the helper of bio_allowed_max_sectors() for
this purpose.

Cc: stable@vger.kernel.org
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Xiao Ni <xni@redhat.com>
Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Fixes: 744889b7cb ("block: don't deal with discard limit in blkdev_issue_discard()")
Fixes: a22c4d7e34 ("block: re-add discard_granularity and alignment checks")
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09 06:23:14 -07:00
Jens Axboe 9cf2bab630 block: kill request ->cpu member
This was used for completion placement for the legacy path,
but for mq we have rq->mq_ctx->cpu for that. Add a helper
to get the request CPU assignment, as the mq_ctx type is
private to blk-mq.

Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07 13:42:33 -07:00
Jens Axboe 8b98a97f80 blk-merge: kill dead queue lock held check
This is dead code, any queue reaching this part has mq_ops
attached.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07 13:42:33 -07:00
Jens Axboe 2081a56bfa block: remove req_no_special_merge() from merging code
It'll always be false at this point, just remove it.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07 13:42:33 -07:00
Jens Axboe 92bc5a2484 block: remove __blk_put_request()
Now there's no difference between blk_put_request() and
__blk_put_request() anymore, get rid of the underscore version and
convert the few callers.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07 13:42:32 -07:00
Jens Axboe a1ce35fa49 block: remove dead elevator code
This removes a bunch of core and elevator related code. On the core
front, we remove anything related to queue running, draining,
initialization, plugging, and congestions. We also kill anything
related to request allocation, merging, retrieval, and completion.

Remove any checking for single queue IO schedulers, as they no
longer exist. This means we can also delete a bunch of code related
to request issue, adding, completion, etc - and all the SQ related
ops and helpers.

Also kill the load_default_modules(), as all that did was provide
for a way to load the default single queue elevator.

Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07 13:42:32 -07:00
Johannes Thumshirn df376b2ed5 block: respect virtual boundary mask in bvecs
With drivers that are settting a virtual boundary constrain, we are
seeing a lot of bio splitting and smaller I/Os being submitted to the
driver.

This happens because the bio gap detection code does not account cases
where PAGE_SIZE - 1 is bigger than queue_virt_boundary() and thus will
split the bio unnecessarily.

Cc: Jan Kara <jack@suse.cz>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07 13:04:22 -07:00
Jianchao Wang 6984046608 block: fix the DISCARD request merge
There are two cases when handle DISCARD merge.
If max_discard_segments == 1, the bios/requests need to be contiguous
to merge. If max_discard_segments > 1, it takes every bio as a range
and different range needn't to be contiguous.

But now, attempt_merge screws this up. It always consider contiguity
for DISCARD for the case max_discard_segments > 1 and cannot merge
contiguous DISCARD for the case max_discard_segments == 1, because
rq_attempt_discard_merge always returns false in this case.
This patch fixes both of the two cases above.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-29 09:32:40 -06:00
Christoph Hellwig 3dccdae54f block: merge BIOVEC_SEG_BOUNDARY into biovec_phys_mergeable
These two checks should always be performed together, so merge them into
a single helper.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-24 12:33:57 -06:00
Christoph Hellwig 6a9f5f240a block: simplify BIOVEC_PHYS_MERGEABLE
Turn the macro into an inline, move it to blk.h and simplify the
arch hooks a bit.

Also rename the function to biovec_phys_mergeable as there is no need
to shout.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-24 12:33:54 -06:00
Christoph Hellwig e9907009cb block: move req_gap_{back,front}_merge to blk-merge.c
Keep it close to the actual users instead of exposing the function to all
drivers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-24 12:33:51 -06:00
Jens Axboe cd4a4ae468 block: don't use blocking queue entered for recursive bio submits
If we end up splitting a bio and the queue goes away between
the initial submission and the later split submission, then we
can block forever in blk_queue_enter() waiting for the reference
to drop to zero. This will never happen, since we already hold
a reference.

Mark a split bio as already having entered the queue, so we can
just use the live non-blocking queue enter variant.

Thanks to Tetsuo Handa for the analysis.

Reported-by: syzbot+c4f9cebf9d651f6e54de@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-02 20:35:00 -06:00
Kent Overstreet 338aa96d56 block: convert bounce, q->bio_split to bioset_init()/mempool_init()
Convert the core block functionality to embedded bio sets.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-30 15:33:32 -06:00
Omar Sandoval 522a777566 block: consolidate struct request timestamp fields
Currently, struct request has four timestamp fields:

- A start time, set at get_request time, in jiffies, used for iostats
- An I/O start time, set at start_request time, in ktime nanoseconds,
  used for blk-stats (i.e., wbt, kyber, hybrid polling)
- Another start time and another I/O start time, used for cfq and bfq

These can all be consolidated into one start time and one I/O start
time, both in ktime nanoseconds, shaving off up to 16 bytes from struct
request depending on the kernel config.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-09 08:33:09 -06:00
Jens Axboe 445251d0f4 blk-mq: fix discard merge with scheduler attached
I ran into an issue on my laptop that triggered a bug on the
discard path:

WARNING: CPU: 2 PID: 207 at drivers/nvme/host/core.c:527 nvme_setup_cmd+0x3d3/0x430
 Modules linked in: rfcomm fuse ctr ccm bnep arc4 binfmt_misc snd_hda_codec_hdmi nls_iso8859_1 nls_cp437 vfat snd_hda_codec_conexant fat snd_hda_codec_generic iwlmvm snd_hda_intel snd_hda_codec snd_hwdep mac80211 snd_hda_core snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq x86_pkg_temp_thermal intel_powerclamp kvm_intel uvcvideo iwlwifi btusb snd_seq_device videobuf2_vmalloc btintel videobuf2_memops kvm snd_timer videobuf2_v4l2 bluetooth irqbypass videobuf2_core aesni_intel aes_x86_64 crypto_simd cryptd snd glue_helper videodev cfg80211 ecdh_generic soundcore hid_generic usbhid hid i915 psmouse e1000e ptp pps_core xhci_pci xhci_hcd intel_gtt
 CPU: 2 PID: 207 Comm: jbd2/nvme0n1p7- Tainted: G     U           4.15.0+ #176
 Hardware name: LENOVO 20FBCTO1WW/20FBCTO1WW, BIOS N1FET59W (1.33 ) 12/19/2017
 RIP: 0010:nvme_setup_cmd+0x3d3/0x430
 RSP: 0018:ffff880423e9f838 EFLAGS: 00010217
 RAX: 0000000000000000 RBX: ffff880423e9f8c8 RCX: 0000000000010000
 RDX: ffff88022b200010 RSI: 0000000000000002 RDI: 00000000327f0000
 RBP: ffff880421251400 R08: ffff88022b200000 R09: 0000000000000009
 R10: 0000000000000000 R11: 0000000000000000 R12: 000000000000ffff
 R13: ffff88042341e280 R14: 000000000000ffff R15: ffff880421251440
 FS:  0000000000000000(0000) GS:ffff880441500000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000055b684795030 CR3: 0000000002e09006 CR4: 00000000001606e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  nvme_queue_rq+0x40/0xa00
  ? __sbitmap_queue_get+0x24/0x90
  ? blk_mq_get_tag+0xa3/0x250
  ? wait_woken+0x80/0x80
  ? blk_mq_get_driver_tag+0x97/0xf0
  blk_mq_dispatch_rq_list+0x7b/0x4a0
  ? deadline_remove_request+0x49/0xb0
  blk_mq_do_dispatch_sched+0x4f/0xc0
  blk_mq_sched_dispatch_requests+0x106/0x170
  __blk_mq_run_hw_queue+0x53/0xa0
  __blk_mq_delay_run_hw_queue+0x83/0xa0
  blk_mq_run_hw_queue+0x6c/0xd0
  blk_mq_sched_insert_request+0x96/0x140
  __blk_mq_try_issue_directly+0x3d/0x190
  blk_mq_try_issue_directly+0x30/0x70
  blk_mq_make_request+0x1a4/0x6a0
  generic_make_request+0xfd/0x2f0
  ? submit_bio+0x5c/0x110
  submit_bio+0x5c/0x110
  ? __blkdev_issue_discard+0x152/0x200
  submit_bio_wait+0x43/0x60
  ext4_process_freed_data+0x1cd/0x440
  ? account_page_dirtied+0xe2/0x1a0
  ext4_journal_commit_callback+0x4a/0xc0
  jbd2_journal_commit_transaction+0x17e2/0x19e0
  ? kjournald2+0xb0/0x250
  kjournald2+0xb0/0x250
  ? wait_woken+0x80/0x80
  ? commit_timeout+0x10/0x10
  kthread+0x111/0x130
  ? kthread_create_worker_on_cpu+0x50/0x50
  ? do_group_exit+0x3a/0xa0
  ret_from_fork+0x1f/0x30
 Code: 73 89 c1 83 ce 10 c1 e1 10 09 ca 83 f8 04 0f 87 0f ff ff ff 8b 4d 20 48 8b 7d 00 c1 e9 09 48 01 8c c7 00 08 00 00 e9 f8 fe ff ff <0f> ff 4c 89 c7 41 bc 0a 00 00 00 e8 0d 78 d6 ff e9 a1 fc ff ff
 ---[ end trace 50d361cc444506c8 ]---
 print_req_error: I/O error, dev nvme0n1, sector 847167488

Decoding the assembly, the request claims to have 0xffff segments,
while nvme counts two. This turns out to be because we don't check
for a data carrying request on the mq scheduler path, and since
blk_phys_contig_segment() returns true for a non-data request,
we decrement the initial segment count of 0 and end up with
0xffff in the unsigned short.

There are a few issues here:

1) We should initialize the segment count for a discard to 1.
2) The discard merging is currently using the data limits for
   segments and sectors.

Fix this up by having attempt_merge() correctly identify the
request, and by initializing the segment count correctly
for discards.

This can only be triggered with mq-deadline on discard capable
devices right now, which isn't a common configuration.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-01 14:01:02 -07:00
Ming Lei b4b6cb6135 Revert "block: blk-merge: try to make front segments in full size"
This reverts commit a2d37968d7.

If max segment size isn't 512-aligned, this patch won't work well.

Also once multipage bvec is enabled, adjacent bvecs won't be physically
contiguous if page is added via bio_add_page(), so we don't need this
kind of complicated logic.

Reported-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 20:23:19 -07:00
Ming Lei cf8c0c6a38 block: blk-merge: remove unnecessary check
In this case, 'sectors' can't be zero at all, so remove the check
and let the bio be split.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-06 09:18:00 -07:00
Ming Lei a2d37968d7 block: blk-merge: try to make front segments in full size
When merging one bvec into segment, if the bvec is too big
to merge, current policy is to move the whole bvec into another
new segment.

This patchset changes the policy into trying to maximize size of
front segments, that means in above situation, part of bvec
is merged into current segment, and the remainder is put
into next segment.

This patch prepares for support multipage bvec because
it can be quite common to see this case and we should try
to make front segments in full size.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-06 09:18:00 -07:00