Commit Graph

20 Commits

Author SHA1 Message Date
Florian Westphal 2294be0f11 net: use skb_sec_path helper in more places
skb_sec_path gains 'const' qualifier to avoid
xt_policy.c: 'skb_sec_path' discards 'const' qualifier from pointer target type

same reasoning as previous conversions: Won't need to touch these
spots anymore when skb->sp is removed.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 11:21:37 -08:00
Florian Westphal 0ca64da128 xfrm: change secpath_set to return secpath struct, not error value
It can only return 0 (success) or -ENOMEM.
Change return value to a pointer to secpath struct.

This avoids direct access to skb->sp:

err = secpath_set(skb);
if (!err) ..
skb->sp-> ...

Becomes:
sp = secpath_set(skb)
if (!sp) ..
sp-> ..

This reduces noise in followup patch which is going to remove skb->sp.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 11:21:37 -08:00
David S. Miller 7a49d3d4ea Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2018-07-27

1) Extend the output_mark to also support the input direction
   and masking the mark values before applying to the skb.

2) Add a new lookup key for the upcomming xfrm interfaces.

3) Extend the xfrm lookups to match xfrm interface IDs.

4) Add virtual xfrm interfaces. The purpose of these interfaces
   is to overcome the design limitations that the existing
   VTI devices have.

  The main limitations that we see with the current VTI are the
  following:

  VTI interfaces are L3 tunnels with configurable endpoints.
  For xfrm, the tunnel endpoint are already determined by the SA.
  So the VTI tunnel endpoints must be either the same as on the
  SA or wildcards. In case VTI tunnel endpoints are same as on
  the SA, we get a one to one correlation between the SA and
  the tunnel. So each SA needs its own tunnel interface.

  On the other hand, we can have only one VTI tunnel with
  wildcard src/dst tunnel endpoints in the system because the
  lookup is based on the tunnel endpoints. The existing tunnel
  lookup won't work with multiple tunnels with wildcard
  tunnel endpoints. Some usecases require more than on
  VTI tunnel of this type, for example if somebody has multiple
  namespaces and every namespace requires such a VTI.

  VTI needs separate interfaces for IPv4 and IPv6 tunnels.
  So when routing to a VTI, we have to know to which address
  family this traffic class is going to be encapsulated.
  This is a lmitation because it makes routing more complex
  and it is not always possible to know what happens behind the
  VTI, e.g. when the VTI is move to some namespace.

  VTI works just with tunnel mode SAs. We need generic interfaces
  that ensures transfomation, regardless of the xfrm mode and
  the encapsulated address family.

  VTI is configured with a combination GRE keys and xfrm marks.
  With this we have to deal with some extra cases in the generic
  tunnel lookup because the GRE keys on the VTI are actually
  not GRE keys, the GRE keys were just reused for something else.
  All extensions to the VTI interfaces would require to add
  even more complexity to the generic tunnel lookup.

  So to overcome this, we developed xfrm interfaces with the
  following design goal:

  It should be possible to tunnel IPv4 and IPv6 through the same
  interface.

  No limitation on xfrm mode (tunnel, transport and beet).

  Should be a generic virtual interface that ensures IPsec
  transformation, no need to know what happens behind the
  interface.

  Interfaces should be configured with a new key that must match a
  new policy/SA lookup key.

  The lookup logic should stay in the xfrm codebase, no need to
  change or extend generic routing and tunnel lookups.

  Should be possible to use IPsec hardware offloads of the underlying
  interface.

5) Remove xfrm pcpu policy cache. This was added after the flowcache
   removal, but it turned out to make things even worse.
   From Florian Westphal.

6) Allow to update the set mark on SA updates.
   From Nathan Harold.

7) Convert some timestamps to time64_t.
   From Arnd Bergmann.

8) Don't check the offload_handle in xfrm code,
   it is an opaque data cookie for the driver.
   From Shannon Nelson.

9) Remove xfrmi interface ID from flowi. After this pach
   no generic code is touched anymore to do xfrm interface
   lookups. From Benedict Wong.

10) Allow to update the xfrm interface ID on SA updates.
    From Nathan Harold.

11) Don't pass zero to ERR_PTR() in xfrm_resolve_and_create_bundle.
    From YueHaibing.

12) Return more detailed errors on xfrm interface creation.
    From Benedict Wong.

13) Use PTR_ERR_OR_ZERO instead of IS_ERR + PTR_ERR.
    From the kbuild test robot.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-27 09:33:37 -07:00
Shannon Nelson fcb662deeb xfrm: don't check offload_handle for nonzero
The offload_handle should be an opaque data cookie for the driver
to use, much like the data cookie for a timer or alarm callback.
Thus, the XFRM stack should not be checking for non-zero, because
the driver might use that to store an array reference, which could
be zero, or some other zero but meaningful value.

We can remove the checks for non-zero because there are plenty
other attributes also being checked to see if there is an offload
in place for the SA in question.

Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-07-19 10:18:04 +02:00
David Miller d4546c2509 net: Convert GRO SKB handling to list_head.
Manage pending per-NAPI GRO packets via list_head.

Return an SKB pointer from the GRO receive handlers.  When GRO receive
handlers return non-NULL, it means that this SKB needs to be completed
at this time and removed from the NAPI queue.

Several operations are greatly simplified by this transformation,
especially timing out the oldest SKB in the list when gro_count
exceeds MAX_GRO_SKBS, and napi_gro_flush() which walks the queue
in reverse order.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26 11:33:04 +09:00
Shannon Nelson 5211fcfb81 esp: check the NETIF_F_HW_ESP_TX_CSUM bit before segmenting
If I understand correctly, we should not be asking for a
checksum offload on an ipsec packet if the netdev isn't
advertising NETIF_F_HW_ESP_TX_CSUM.  In that case, we should
clear the NETIF_F_CSUM_MASK bits.

Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-02-27 10:46:01 +01:00
David S. Miller 5ca114400d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
en_rx_am.c was deleted in 'net-next' but had a bug fixed in it in
'net'.

The esp{4,6}_offload.c conflicts were overlapping changes.
The 'out' label is removed so we just return ERR_PTR(-EINVAL)
directly.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23 13:51:56 -05:00
Willem de Bruijn 121d57af30 gso: validate gso_type in GSO handlers
Validate gso_type during segmentation as SKB_GSO_DODGY sources
may pass packets where the gso_type does not match the contents.

Syzkaller was able to enter the SCTP gso handler with a packet of
gso_type SKB_GSO_TCPV4.

On entry of transport layer gso handlers, verify that the gso_type
matches the transport protocol.

Fixes: 90017accff ("sctp: Add GSO support")
Link: http://lkml.kernel.org/r/<001a1137452496ffc305617e5fe0@google.com>
Reported-by: syzbot+fee64147a25aecd48055@syzkaller.appspotmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22 16:01:30 -05:00
David S. Miller c02b3741eb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Overlapping changes all over.

The mini-qdisc bits were a little bit tricky, however.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-17 00:10:42 -05:00
Steffen Klassert 374d1b5a81 esp: Fix GRO when the headers not fully in the linear part of the skb.
The GRO layer does not necessarily pull the complete headers
into the linear part of the skb, a part may remain on the
first page fragment. This can lead to a crash if we try to
pull the headers, so make sure we have them on the linear
part before pulling.

Fixes: 7785bba299 ("esp: Add a software GRO codepath")
Reported-by: syzbot+82bbd65569c49c6c0c4d@syzkaller.appspotmail.com
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-01-09 13:01:58 +01:00
Steffen Klassert 3dca3f38cf xfrm: Separate ESP handling from segmentation for GRO packets.
We change the ESP GSO handlers to only segment the packets.
The ESP handling and encryption is defered to validate_xmit_xfrm()
where this is done for non GRO packets too. This makes the code
more robust and prepares for asynchronous crypto handling.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-12-20 10:41:31 +01:00
David S. Miller 6026e043d0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Three cases of simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01 17:42:05 -07:00
Steffen Klassert 4ff0308f06 esp: Fix error handling on layer 2 xmit.
esp_output_tail() and esp6_output_tail() can return negative
and positive error values. We currently treat only negative
values as errors, fix this to treat both cases as error.

Fixes: fca11ebde3 ("esp4: Reorganize esp_output")
Fixes: 383d0350f2 ("esp6: Reorganize esp_output")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-08-07 08:31:07 +02:00
Ilan Tayari ffdb5211da xfrm: Auto-load xfrm offload modules
IPSec crypto offload depends on the protocol-specific
offload module (such as esp_offload.ko).

When the user installs an SA with crypto-offload, load
the offload module automatically, in the same way
that the protocol module is loaded (such as esp.ko)

Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-08-02 11:00:15 +02:00
Ilan Tayari ec9567a9e0 esp4: Support RX checksum with crypto offload
Keep the device's reported ip_summed indication in case crypto
was offloaded by the device. Subtract the csum values of the
stripped parts (esp header+iv, esp trailer+auth_data) to keep
value correct.

Note: CHECKSUM_COMPLETE should be indicated only if skb->csum
has the post-decryption offload csum value.

Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-08-02 11:00:15 +02:00
Ilan Tayari 8f92e03ecc esp4/6: Fix GSO path for non-GSO SW-crypto packets
If esp*_offload module is loaded, outbound packets take the
GSO code path, being encapsulated at layer 3, but encrypted
in layer 2. validate_xmit_xfrm calls esp*_xmit for that.

esp*_xmit was wrongfully detecting these packets as going
through hardware crypto offload, while in fact they should
be encrypted in software, causing plaintext leakage to
the network, and also dropping at the receiver side.

Perform the encryption in esp*_xmit, if the SA doesn't have
a hardware offload_handle.

Also, align esp6 code to esp4 logic.

Fixes: fca11ebde3 ("esp4: Reorganize esp_output")
Fixes: 383d0350f2 ("esp6: Reorganize esp_output")
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-19 07:48:57 +02:00
Steffen Klassert bcd1f8a45e xfrm: Prepare the GRO codepath for hardware offloading.
On IPsec hardware offloading, we already get a secpath with
valid state attached when the packet enters the GRO handlers.
So check for hardware offload and skip the state lookup in this
case.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14 10:07:49 +02:00
Steffen Klassert 7862b4058b esp: Add gso handlers for esp4 and esp6
This patch extends the xfrm_type by an encap function pointer
and implements esp4_gso_encap and esp6_gso_encap. These functions
doing the basic esp encapsulation for a GSO packet. In case the
GSO packet needs to be segmented in software, we add gso_segment
functions. This codepath is going to be used on esp hardware
offloads.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14 10:06:50 +02:00
Steffen Klassert fca11ebde3 esp4: Reorganize esp_output
We need a fallback for ESP at layer 2, so split esp_output
into generic functions that can be used at layer 3 and layer 2
and use them in esp_output. We also add esp_xmit which is
used for the layer 2 fallback.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14 10:06:33 +02:00
Steffen Klassert 7785bba299 esp: Add a software GRO codepath
This patch adds GRO ifrastructure and callbacks for ESP on
ipv4 and ipv6.

In case the GRO layer detects an ESP packet, the
esp{4,6}_gro_receive() function does a xfrm state lookup
and calls the xfrm input layer if it finds a matching state.
The packet will be decapsulated and reinjected it into layer 2.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15 11:04:11 +01:00