Commit Graph

256 Commits

Author SHA1 Message Date
Andrea Arcangeli 37c2ac7872 thp: compound_trans_order
Read compound_trans_order safe. Noop for CONFIG_TRANSPARENT_HUGEPAGE=n.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 17:32:47 -08:00
Rik van Riel 2c888cfbc1 thp: fix anon memory statistics with transparent hugepages
Count each transparent hugepage as HPAGE_PMD_NR pages in the LRU
statistics, so the Active(anon) and Inactive(anon) statistics in
/proc/meminfo are correct.

Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 17:32:46 -08:00
Daisuke Nishimura 152c9ccb75 thp: transhuge-memcg: commit tail pages at charge
By this patch, when a transparent hugepage is charged, not only the head
page but also all the tail pages are committed, IOW pc->mem_cgroup and
pc->flags of tail pages are set.

Without this patch:

- Tail pages are not linked to any memcg's LRU at splitting. This causes many
  problems, for example, the charged memcg's directory can never be rmdir'ed
  because it doesn't have enough pages to scan to make the usage decrease to 0.
- "rss" field in memory.stat would be incorrect. Moreover, usage_in_bytes in
  root cgroup is calculated by the stat not by res_counter(since 2.6.32),
  it would be incorrect too.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 17:32:43 -08:00
Andrea Arcangeli ec1685109f thp: memcg compound
Teach memcg to charge/uncharge compound pages.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 17:32:43 -08:00
KAMEZAWA Hiroyuki ebb76ce16d memcg: fix wrong VM_BUG_ON() in try_charge()'s mm->owner check
At __mem_cgroup_try_charge(), VM_BUG_ON(!mm->owner) is checked.
But as commented in mem_cgroup_from_task(), mm->owner can be NULL
in some racy case. This check of VM_BUG_ON() is bad.

A possible story to hit this is at swapoff()->try_to_unuse(). It passes
mm_struct to mem_cgroup_try_charge_swapin() while mm->owner is NULL. If we
can't get proper mem_cgroup from swap_cgroup information, mm->owner is used
as charge target and we see NULL.

Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-30 10:07:06 -08:00
Michal Hocko a42c390cfa cgroups: make swap accounting default behavior configurable
Swap accounting can be configured by CONFIG_CGROUP_MEM_RES_CTLR_SWAP
configuration option and then it is turned on by default.  There is a boot
option (noswapaccount) which can disable this feature.

This makes it hard for distributors to enable the configuration option as
this feature leads to a bigger memory consumption and this is a no-go for
general purpose distribution kernel.  On the other hand swap accounting
may be very usuful for some workloads.

This patch adds a new configuration option which controls the default
behavior (CGROUP_MEM_RES_CTLR_SWAP_ENABLED).  If the option is selected
then the feature is turned on by default.

It also adds a new boot parameter swapaccount[=1|0] which enhances the
original noswapaccount parameter semantic by means of enable/disable logic
(defaults to 1 if no value is provided to be still consistent with
noswapaccount).

The default behavior is unchanged (if CONFIG_CGROUP_MEM_RES_CTLR_SWAP is
enabled then CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is enabled as well)

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-25 06:50:45 +09:00
Daisuke Nishimura b1dd693e5b memcg: avoid deadlock between move charge and try_charge()
__mem_cgroup_try_charge() can be called under down_write(&mmap_sem)(e.g.
mlock does it). This means it can cause deadlock if it races with move charge:

Ex.1)
                move charge             |        try charge
  --------------------------------------+------------------------------
    mem_cgroup_can_attach()             |  down_write(&mmap_sem)
      mc.moving_task = current          |    ..
      mem_cgroup_precharge_mc()         |  __mem_cgroup_try_charge()
        mem_cgroup_count_precharge()    |    prepare_to_wait()
          down_read(&mmap_sem)          |    if (mc.moving_task)
          -> cannot aquire the lock     |    -> true
                                        |      schedule()

Ex.2)
                move charge             |        try charge
  --------------------------------------+------------------------------
    mem_cgroup_can_attach()             |
      mc.moving_task = current          |
      mem_cgroup_precharge_mc()         |
        mem_cgroup_count_precharge()    |
          down_read(&mmap_sem)          |
          ..                            |
          up_read(&mmap_sem)            |
                                        |  down_write(&mmap_sem)
    mem_cgroup_move_task()              |    ..
      mem_cgroup_move_charge()          |  __mem_cgroup_try_charge()
        down_read(&mmap_sem)            |    prepare_to_wait()
        -> cannot aquire the lock       |    if (mc.moving_task)
                                        |    -> true
                                        |      schedule()

To avoid this deadlock, we do all the move charge works (both can_attach() and
attach()) under one mmap_sem section.
And after this patch, we set/clear mc.moving_task outside mc.lock, because we
use the lock only to check mc.from/to.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-25 06:50:44 +09:00
Kirill A. Shutemov 112bc2e120 memcg: fix false positive VM_BUG on non-SMP
Fix this:

  kernel BUG at mm/memcontrol.c:2155!
  invalid opcode: 0000 [#1]
  last sysfs file:

  Pid: 18, comm: sh Not tainted 2.6.37-rc3 #3 /Bochs
  EIP: 0060:[<c10731b2>] EFLAGS: 00000246 CPU: 0
  EIP is at mem_cgroup_move_account+0xe2/0xf0
  EAX: 00000004 EBX: c6f931d4 ECX: c681c300 EDX: c681c000
  ESI: c681c300 EDI: ffffffea EBP: c681c000 ESP: c46f3e30
   DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
  Process sh (pid: 18, ti=c46f2000 task=c6826e60 task.ti=c46f2000)
  Stack:
   00000155 c681c000 0805f000 c46ee180 c46f3e5c c7058820 c1074d37 00000000
   08060000 c46db9a0 c46ec080 c7058820 0805f000 08060000 c46f3e98 c1074c50
   c106c75e c46f3e98 c46ec080 08060000 0805ffff c46db9a0 c46f3e98 c46e0340
  Call Trace:
   [<c1074d37>] ? mem_cgroup_move_charge_pte_range+0xe7/0x130
   [<c1074c50>] ? mem_cgroup_move_charge_pte_range+0x0/0x130
   [<c106c75e>] ? walk_page_range+0xee/0x1d0
   [<c10725d6>] ? mem_cgroup_move_task+0x66/0x90
   [<c1074c50>] ? mem_cgroup_move_charge_pte_range+0x0/0x130
   [<c1072570>] ? mem_cgroup_move_task+0x0/0x90
   [<c1042616>] ? cgroup_attach_task+0x136/0x200
   [<c1042878>] ? cgroup_tasks_write+0x48/0xc0
   [<c1041e9e>] ? cgroup_file_write+0xde/0x220
   [<c101398d>] ? do_page_fault+0x17d/0x3f0
   [<c108a79d>] ? alloc_fd+0x2d/0xd0
   [<c1041dc0>] ? cgroup_file_write+0x0/0x220
   [<c1077ba2>] ? vfs_write+0x92/0xc0
   [<c1077c81>] ? sys_write+0x41/0x70
   [<c1140e3d>] ? syscall_call+0x7/0xb
  Code: 03 00 74 09 8b 44 24 04 e8 1c f1 ff ff 89 73 04 8d 86 b0 00 00 00 b9 01 00 00 00 89 da 31 ff e8 65 f5 ff ff e9 4d ff ff ff 0f 0b <0f> 0b 0f 0b 0f 0b 90 8d b4 26 00 00 00 00 83 ec 10 8b 0d f4 e3
  EIP: [<c10731b2>] mem_cgroup_move_account+0xe2/0xf0 SS:ESP 0068:c46f3e30
  ---[ end trace 7daa1582159b6532 ]---

lock_page_cgroup and unlock_page_cgroup are implemented using
bit_spinlock.  bit_spinlock doesn't touch the bit if we are on non-SMP
machine, so we can't use the bit to check whether the lock was taken.

Let's introduce is_page_cgroup_locked based on bit_spin_is_locked instead
of PageCgroupLocked to fix it.

[akpm@linux-foundation.org: s/is_page_cgroup_locked/page_is_cgroup_locked/]
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-25 06:50:40 +09:00
Dan Carpenter d2e61b8dc9 memcg: null dereference on allocation failure
The original code had a null dereference if alloc_percpu() failed.  This
was introduced in commit 711d3d2c9b ("memcg: cpu hotplug aware percpu
count updates")

Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12 07:55:31 -08:00
KAMEZAWA Hiroyuki 26174efd42 memcg: generic filestat update interface
This patch extracts the core logic from mem_cgroup_update_file_mapped() as
mem_cgroup_update_file_stat() and adds a wrapper.

As a planned future update, memory cgroup has to count dirty pages to
implement dirty_ratio/limit.  And more, the number of dirty pages is
required to kick flusher thread to start writeback.  (Now, no kick.)

This patch is preparation for it and makes other statistics implementation
clearer.  Just a clean up.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Reviewed-by: Greg Thelen <gthelen@google.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:10 -07:00
KAMEZAWA Hiroyuki 1489ebad8b memcg: cpu hotplug aware quick acount_move detection
An event counter MEM_CGROUP_ON_MOVE is used for quick check whether file
stat update can be done in async manner or not.  Now, it use percpu
counter and for_each_possible_cpu to update.

This patch replaces for_each_possible_cpu to for_each_online_cpu and adds
necessary synchronization logic at CPU HOTPLUG.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:09 -07:00
KAMEZAWA Hiroyuki 711d3d2c9b memcg: cpu hotplug aware percpu count updates
Now, memcgroup's per cpu coutner uses for_each_possible_cpu() to get the
value.  It's better to use for_each_online_cpu() and a cpu hotplug
handler.

This patch only handles statistics counter.  MEM_CGROUP_ON_MOVE will be
handled in another patch.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:09 -07:00
KAMEZAWA Hiroyuki 7d74b06f24 memcg: use for_each_mem_cgroup
In memory cgroup management, we sometimes have to walk through
subhierarchy of cgroup to gather informaiton, or lock something, etc.

Now, to do that, mem_cgroup_walk_tree() function is provided.  It calls
given callback function per cgroup found.  But the bad thing is that it
has to pass a fixed style function and argument, "void*" and it adds much
type casting to memcontrol.c.

To make the code clean, this patch replaces walk_tree() with

  for_each_mem_cgroup_tree(iter, root)

An iterator style call.  The good point is that iterator call doesn't have
to assume what kind of function is called under it.  A bad point is that
it may cause reference-count leak if a caller use "break" from the loop by
mistake.

I think the benefit is larger.  The modified code seems straigtforward and
easy to read because we don't have misterious callbacks and pointer cast.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:09 -07:00
KAMEZAWA Hiroyuki 32047e2a85 memcg: avoid lock in updating file_mapped (Was fix race in file_mapped accouting flag management
At accounting file events per memory cgroup, we need to find memory cgroup
via page_cgroup->mem_cgroup.  Now, we use lock_page_cgroup() for guarantee
pc->mem_cgroup is not overwritten while we make use of it.

But, considering the context which page-cgroup for files are accessed,
we can use alternative light-weight mutual execusion in the most case.

At handling file-caches, the only race we have to take care of is "moving"
account, IOW, overwriting page_cgroup->mem_cgroup.  (See comment in the
patch)

Unlike charge/uncharge, "move" happens not so frequently. It happens only when
rmdir() and task-moving (with a special settings.)
This patch adds a race-checker for file-cache-status accounting v.s. account
moving. The new per-cpu-per-memcg counter MEM_CGROUP_ON_MOVE is added.
The routine for account move
  1. Increment it before start moving
  2. Call synchronize_rcu()
  3. Decrement it after the end of moving.
By this, file-status-counting routine can check it needs to call
lock_page_cgroup(). In most case, I doesn't need to call it.

Following is a perf data of a process which mmap()/munmap 32MB of file cache
in a minute.

Before patch:
    28.25%     mmap  mmap               [.] main
    22.64%     mmap  [kernel.kallsyms]  [k] page_fault
     9.96%     mmap  [kernel.kallsyms]  [k] mem_cgroup_update_file_mapped
     3.67%     mmap  [kernel.kallsyms]  [k] filemap_fault
     3.50%     mmap  [kernel.kallsyms]  [k] unmap_vmas
     2.99%     mmap  [kernel.kallsyms]  [k] __do_fault
     2.76%     mmap  [kernel.kallsyms]  [k] find_get_page

After patch:
    30.00%     mmap  mmap               [.] main
    23.78%     mmap  [kernel.kallsyms]  [k] page_fault
     5.52%     mmap  [kernel.kallsyms]  [k] mem_cgroup_update_file_mapped
     3.81%     mmap  [kernel.kallsyms]  [k] unmap_vmas
     3.26%     mmap  [kernel.kallsyms]  [k] find_get_page
     3.18%     mmap  [kernel.kallsyms]  [k] __do_fault
     3.03%     mmap  [kernel.kallsyms]  [k] filemap_fault
     2.40%     mmap  [kernel.kallsyms]  [k] handle_mm_fault
     2.40%     mmap  [kernel.kallsyms]  [k] do_page_fault

This patch reduces memcg's cost to some extent.
(mem_cgroup_update_file_mapped is called by both of map/unmap)

Note: It seems some more improvements are required..but no idea.
      maybe removing set/unset flag is required.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:09 -07:00
KAMEZAWA Hiroyuki 0c270f8f99 memcg: fix race in file_mapped accouting flag management
Presently memory cgroup accounts file-mapped by counter and flag.  counter
is working in the same way with zone_stat but FileMapped flag only exists
in memcg (for helping move_account).

This flag can be updated wrongly in a case.  Assume CPU0 and CPU1 and a
thread mapping a page on CPU0, another thread unmapping it on CPU1.

    CPU0                   		CPU1
				rmv rmap (mapcount 1->0)
   add rmap (mapcount 0->1)
   lock_page_cgroup()
   memcg counter+1		(some delay)
   set MAPPED FLAG.
   unlock_page_cgroup()
				lock_page_cgroup()
				memcg counter-1
				clear MAPPED flag

In the above sequence counter is properly updated but FLAG is not.  This
means that representing a state by a flag which is maintained by counter
needs some special care.

To handle this, when clearing a flag, this patch check mapcount directly
and clear the flag only when mapcount == 0.  (if mapcount >0, someone will
make it to zero later and flag will be cleared.)

Reverse case, dec-after-inc cannot be a problem because page_table_lock()
works well for it.  (IOW, to make above sequence, 2 processes should touch
the same page at once with map/unmap.)

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:09 -07:00
Kirill A. Shutemov ad4ca5f4b7 memcg: fix thresholds with use_hierarchy == 1
We need to check parent's thresholds if parent has use_hierarchy == 1 to
be sure that parent's threshold events will be triggered even if parent
itself is not active (no MEM_CGROUP_EVENTS).

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-07 13:31:21 -07:00
KOSAKI Motohiro 13d7e3a2db memcg: convert to use zone_to_nid() from bare zone->zone_pgdat->node_id
We have zone_to_nid().  this patch convert all existing users of
zone->zone_pgdat->node_id.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Nishimura Daisuke <d-nishimura@mtf.biglobe.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:19 -07:00
KOSAKI Motohiro 00918b6ab8 memcg: remove nid and zid argument from mem_cgroup_soft_limit_reclaim()
mem_cgroup_soft_limit_reclaim() has zone, nid and zid argument.  but nid
and zid can be calculated from zone.  So remove it.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Nishimura Daisuke <d-nishimura@mtf.biglobe.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:19 -07:00
KOSAKI Motohiro 14fec79680 memcg: mem_cgroup_shrink_node_zone() doesn't need sc.nodemask
Currently mem_cgroup_shrink_node_zone() call shrink_zone() directly.  thus
it doesn't need to initialize sc.nodemask because shrink_zone() doesn't
use it at all.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Nishimura Daisuke <d-nishimura@mtf.biglobe.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:19 -07:00
KAMEZAWA Hiroyuki f75ca96203 memcg: avoid css_get()
Now, memory cgroup increments css(cgroup subsys state)'s reference count
per a charged page.  And the reference count is kept until the page is
uncharged.  But this has 2 bad effect.

 1. Because css_get/put calls atomic_inc()/dec, heavy call of them
    on large smp will not scale well.
 2. Because css's refcnt cannot be in a state as "ready-to-release",
    cgroup's notify_on_release handler can't work with memcg.
 3. css's refcnt is atomic_t, it means smaller than 32bit. Maybe too small.

This has been a problem since the 1st merge of memcg.

This is a trial to remove css's refcnt per a page. Even if we remove
refcnt, pre_destroy() does enough synchronization as
  - check res->usage == 0.
  - check no pages on LRU.

This patch removes css's refcnt per page.  Even after this patch, at the
1st look, it seems css_get() is still called in try_charge().

But the logic is.

  - If a memcg of mm->owner is cached one, consume_stock() will work.
    At success, return immediately.
  - If consume_stock returns false, css_get() is called and go to
    slow path which may be blocked. At the end of slow path,
    css_put() is called and restart from the start if necessary.

So, in the fast path, we don't call css_get() and can avoid access to
shared counter. This patch can make the most possible case fast.

Here is a result of multi-threaded page fault benchmark.

[Before]
    25.32%  multi-fault-all  [kernel.kallsyms]      [k] clear_page_c
     9.30%  multi-fault-all  [kernel.kallsyms]      [k] _raw_spin_lock_irqsave
     8.02%  multi-fault-all  [kernel.kallsyms]      [k] try_get_mem_cgroup_from_mm <=====(*)
     7.83%  multi-fault-all  [kernel.kallsyms]      [k] down_read_trylock
     5.38%  multi-fault-all  [kernel.kallsyms]      [k] __css_put
     5.29%  multi-fault-all  [kernel.kallsyms]      [k] __alloc_pages_nodemask
     4.92%  multi-fault-all  [kernel.kallsyms]      [k] _raw_spin_lock_irq
     4.24%  multi-fault-all  [kernel.kallsyms]      [k] up_read
     3.53%  multi-fault-all  [kernel.kallsyms]      [k] css_put
     2.11%  multi-fault-all  [kernel.kallsyms]      [k] handle_mm_fault
     1.76%  multi-fault-all  [kernel.kallsyms]      [k] __rmqueue
     1.64%  multi-fault-all  [kernel.kallsyms]      [k] __mem_cgroup_commit_charge

[After]
    28.41%  multi-fault-all  [kernel.kallsyms]      [k] clear_page_c
    10.08%  multi-fault-all  [kernel.kallsyms]      [k] _raw_spin_lock_irq
     9.58%  multi-fault-all  [kernel.kallsyms]      [k] down_read_trylock
     9.38%  multi-fault-all  [kernel.kallsyms]      [k] _raw_spin_lock_irqsave
     5.86%  multi-fault-all  [kernel.kallsyms]      [k] __alloc_pages_nodemask
     5.65%  multi-fault-all  [kernel.kallsyms]      [k] up_read
     2.82%  multi-fault-all  [kernel.kallsyms]      [k] handle_mm_fault
     2.64%  multi-fault-all  [kernel.kallsyms]      [k] mem_cgroup_add_lru_list
     2.48%  multi-fault-all  [kernel.kallsyms]      [k] __mem_cgroup_commit_charge

Then, 8.02% of try_get_mem_cgroup_from_mm() disappears because this patch
removes css_tryget() in it. (But yes, this is an extreme case.)

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:19 -07:00
KAMEZAWA Hiroyuki 158e0a2d1b memcg: use find_lock_task_mm() in memory cgroups oom
When the OOM killer scans task, it check a task is under memcg or
not when it's called via memcg's context.

But, as Oleg pointed out, a thread group leader may have NULL ->mm
and task_in_mem_cgroup() may do wrong decision. We have to use
find_lock_task_mm() in memcg as generic OOM-Killer does.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:19 -07:00
Daisuke Nishimura 73045c47b6 memcg: remove mem from arg of charge_common
mem_cgroup_charge_common() is always called with @mem = NULL, so it's
meaningless.  This patch removes it.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:19 -07:00
Daisuke Nishimura bd0d24bfe8 memcg: remove redundant code
- try_get_mem_cgroup_from_mm() calls rcu_read_lock/unlock by itself, so we
  don't have to call them in task_in_mem_cgroup().
- *mz is not used in __mem_cgroup_uncharge_common().
- we don't have to call lookup_page_cgroup() in mem_cgroup_end_migration()
  after we've cleared PCG_MIGRATION of @oldpage.
- remove empty comment.
- remove redundant empty line in mem_cgroup_cache_charge().

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:18 -07:00
KAMEZAWA Hiroyuki 2bd9bb206b memcg: clean up waiting move acct
Now, for checking a memcg is under task-account-moving, we do css_tryget()
against mc.to and mc.from.  But this is just complicating things.  This
patch makes the check easier.

This patch adds a spinlock to move_charge_struct and guard modification of
mc.to and mc.from.  By this, we don't have to think about complicated
races arount this not-critical path.

[balbir@linux.vnet.ibm.com: don't crash on a null memcg being passed]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:18 -07:00
KAMEZAWA Hiroyuki 4b53433468 memcg: clean up try_charge main loop
mem_cgroup_try_charge() has a big loop in it and seems to be hard to read.
 Most of routines are for slow path.  This patch moves codes out from the
loop and make it clear what's done.

Summary:
 - refactoring a function to detect a memcg is under acccount move or not.
 - refactoring a function to wait for the end of moving task acct.
 - refactoring a main loop('s slow path) as a function and make it clear
   why we retry or quit by return code.
 - add fatal_signal_pending() check for bypassing charge loops.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:18 -07:00
KOSAKI Motohiro cc8e970c3c memcg: add mm_vmscan_memcg_isolate tracepoint
Memcg also need to trace page isolation information as global reclaim.
This patch does it.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:45:03 -07:00
David Rientjes a63d83f427 oom: badness heuristic rewrite
This a complete rewrite of the oom killer's badness() heuristic which is
used to determine which task to kill in oom conditions.  The goal is to
make it as simple and predictable as possible so the results are better
understood and we end up killing the task which will lead to the most
memory freeing while still respecting the fine-tuning from userspace.

Instead of basing the heuristic on mm->total_vm for each task, the task's
rss and swap space is used instead.  This is a better indication of the
amount of memory that will be freeable if the oom killed task is chosen
and subsequently exits.  This helps specifically in cases where KDE or
GNOME is chosen for oom kill on desktop systems instead of a memory
hogging task.

The baseline for the heuristic is a proportion of memory that each task is
currently using in memory plus swap compared to the amount of "allowable"
memory.  "Allowable," in this sense, means the system-wide resources for
unconstrained oom conditions, the set of mempolicy nodes, the mems
attached to current's cpuset, or a memory controller's limit.  The
proportion is given on a scale of 0 (never kill) to 1000 (always kill),
roughly meaning that if a task has a badness() score of 500 that the task
consumes approximately 50% of allowable memory resident in RAM or in swap
space.

The proportion is always relative to the amount of "allowable" memory and
not the total amount of RAM systemwide so that mempolicies and cpusets may
operate in isolation; they shall not need to know the true size of the
machine on which they are running if they are bound to a specific set of
nodes or mems, respectively.

Root tasks are given 3% extra memory just like __vm_enough_memory()
provides in LSMs.  In the event of two tasks consuming similar amounts of
memory, it is generally better to save root's task.

Because of the change in the badness() heuristic's baseline, it is also
necessary to introduce a new user interface to tune it.  It's not possible
to redefine the meaning of /proc/pid/oom_adj with a new scale since the
ABI cannot be changed for backward compatability.  Instead, a new tunable,
/proc/pid/oom_score_adj, is added that ranges from -1000 to +1000.  It may
be used to polarize the heuristic such that certain tasks are never
considered for oom kill while others may always be considered.  The value
is added directly into the badness() score so a value of -500, for
example, means to discount 50% of its memory consumption in comparison to
other tasks either on the system, bound to the mempolicy, in the cpuset,
or sharing the same memory controller.

/proc/pid/oom_adj is changed so that its meaning is rescaled into the
units used by /proc/pid/oom_score_adj, and vice versa.  Changing one of
these per-task tunables will rescale the value of the other to an
equivalent meaning.  Although /proc/pid/oom_adj was originally defined as
a bitshift on the badness score, it now shares the same linear growth as
/proc/pid/oom_score_adj but with different granularity.  This is required
so the ABI is not broken with userspace applications and allows oom_adj to
be deprecated for future removal.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:45:02 -07:00
KOSAKI Motohiro 25edde0332 vmscan: kill prev_priority completely
Since 2.6.28 zone->prev_priority is unused. Then it can be removed
safely. It reduce stack usage slightly.

Now I have to say that I'm sorry. 2 years ago, I thought prev_priority
can be integrate again, it's useful. but four (or more) times trying
haven't got good performance number. Thus I give up such approach.

The rest of this changelog is notes on prev_priority and why it existed in
the first place and why it might be not necessary any more. This information
is based heavily on discussions between Andrew Morton, Rik van Riel and
Kosaki Motohiro who is heavily quotes from.

Historically prev_priority was important because it determined when the VM
would start unmapping PTE pages. i.e. there are no balances of note within
the VM, Anon vs File and Mapped vs Unmapped. Without prev_priority, there
is a potential risk of unnecessarily increasing minor faults as a large
amount of read activity of use-once pages could push mapped pages to the
end of the LRU and get unmapped.

There is no proof this is still a problem but currently it is not considered
to be. Active files are not deactivated if the active file list is smaller
than the inactive list reducing the liklihood that file-mapped pages are
being pushed off the LRU and referenced executable pages are kept on the
active list to avoid them getting pushed out by read activity.

Even if it is a problem, prev_priority prev_priority wouldn't works
nowadays. First of all, current vmscan still a lot of UP centric code. it
expose some weakness on some dozens CPUs machine. I think we need more and
more improvement.

The problem is, current vmscan mix up per-system-pressure, per-zone-pressure
and per-task-pressure a bit. example, prev_priority try to boost priority to
other concurrent priority. but if the another task have mempolicy restriction,
it is unnecessary, but also makes wrong big latency and exceeding reclaim.
per-task based priority + prev_priority adjustment make the emulation of
per-system pressure. but it have two issue 1) too rough and brutal emulation
2) we need per-zone pressure, not per-system.

Another example, currently DEF_PRIORITY is 12. it mean the lru rotate about
2 cycle (1/4096 + 1/2048 + 1/1024 + .. + 1) before invoking OOM-Killer.
but if 10,0000 thrreads enter DEF_PRIORITY reclaim at the same time, the
system have higher memory pressure than priority==0 (1/4096*10,000 > 2).
prev_priority can't solve such multithreads workload issue. In other word,
prev_priority concept assume the sysmtem don't have lots threads."

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michael Rubin <mrubin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:45:00 -07:00
KAMEZAWA Hiroyuki 4d845ebf4c memcg: fix wake up in oom wait queue
OOM-waitqueue should be waken up when oom_disable is canceled.  This is a
fix for 3c11ecf448 ("memcg: oom kill disable and oom status").

How to test:
 Create a cgroup A...
 1. set memory.limit and memory.memsw.limit to be small value
 2. echo 1 > /cgroup/A/memory.oom_control, this disables oom-kill.
 3. run a program which must cause OOM.

A program executed in 3 will sleep by oom_waiqueue in memcg.  Then, how to
wake it up is problem.

 1. echo 0 > /cgroup/A/memory.oom_control (enable OOM-killer)
 2. echo big mem > /cgroup/A/memory.memsw.limit_in_bytes(allow more swap)

etc..

Without the patch, a task in slept can not be waken up.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-29 15:29:30 -07:00
Kirill A. Shutemov 2c488db27b memcg: clean up memory thresholds
Introduce struct mem_cgroup_thresholds.  It helps to reduce number of
checks of thresholds type (memory or mem+swap).

[akpm@linux-foundation.org: repair comment]
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Phil Carmody <ext-phil.2.carmody@nokia.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:44 -07:00
Kirill A. Shutemov 907860ed38 cgroups: make cftype.unregister_event() void-returning
Since we are unable to handle an error returned by
cftype.unregister_event() properly, let's make the callback
void-returning.

mem_cgroup_unregister_event() has been rewritten to be a "never fail"
function.  On mem_cgroup_usage_register_event() we save old buffer for
thresholds array and reuse it in mem_cgroup_usage_unregister_event() to
avoid allocation.

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Phil Carmody <ext-phil.2.carmody@nokia.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:44 -07:00
akpm@linux-foundation.org ac39cf8cb8 memcg: fix mis-accounting of file mapped racy with migration
FILE_MAPPED per memcg of migrated file cache is not properly updated,
because our hook in page_add_file_rmap() can't know to which memcg
FILE_MAPPED should be counted.

Basically, this patch is for fixing the bug but includes some big changes
to fix up other messes.

Now, at migrating mapped file, events happen in following sequence.

 1. allocate a new page.
 2. get memcg of an old page.
 3. charge ageinst a new page before migration. But at this point,
    no changes to new page's page_cgroup, no commit for the charge.
    (IOW, PCG_USED bit is not set.)
 4. page migration replaces radix-tree, old-page and new-page.
 5. page migration remaps the new page if the old page was mapped.
 6. Here, the new page is unlocked.
 7. memcg commits the charge for newpage, Mark the new page's page_cgroup
    as PCG_USED.

Because "commit" happens after page-remap, we can count FILE_MAPPED
at "5", because we should avoid to trust page_cgroup->mem_cgroup.
if PCG_USED bit is unset.
(Note: memcg's LRU removal code does that but LRU-isolation logic is used
 for helping it. When we overwrite page_cgroup->mem_cgroup, page_cgroup is
 not on LRU or page_cgroup->mem_cgroup is NULL.)

We can lose file_mapped accounting information at 5 because FILE_MAPPED
is updated only when mapcount changes 0->1. So we should catch it.

BTW, historically, above implemntation comes from migration-failure
of anonymous page. Because we charge both of old page and new page
with mapcount=0, we can't catch
  - the page is really freed before remap.
  - migration fails but it's freed before remap
or .....corner cases.

New migration sequence with memcg is:

 1. allocate a new page.
 2. mark PageCgroupMigration to the old page.
 3. charge against a new page onto the old page's memcg. (here, new page's pc
    is marked as PageCgroupUsed.)
 4. page migration replaces radix-tree, page table, etc...
 5. At remapping, new page's page_cgroup is now makrked as "USED"
    We can catch 0->1 event and FILE_MAPPED will be properly updated.

    And we can catch SWAPOUT event after unlock this and freeing this
    page by unmap() can be caught.

 7. Clear PageCgroupMigration of the old page.

So, FILE_MAPPED will be correctly updated.

Then, for what MIGRATION flag is ?
  Without it, at migration failure, we may have to charge old page again
  because it may be fully unmapped. "charge" means that we have to dive into
  memory reclaim or something complated. So, it's better to avoid
  charge it again. Before this patch, __commit_charge() was working for
  both of the old/new page and fixed up all. But this technique has some
  racy condtion around FILE_MAPPED and SWAPOUT etc...
  Now, the kernel use MIGRATION flag and don't uncharge old page until
  the end of migration.

I hope this change will make memcg's page migration much simpler.  This
page migration has caused several troubles.  Worth to add a flag for
simplification.

Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:44 -07:00
Phil Carmody 315c1998e1 mm: memcontrol - uninitialised return value
Only an out of memory error will cause ret to be set.

Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:44 -07:00
Phil Carmody 5407a56257 mm: remove unnecessary use of atomic
The bottom 4 hunks are atomically changing memory to which there are no
aliases as it's freshly allocated, so there's no need to use atomic
operations.

The other hunks are just atomic_read and atomic_set, and do not involve
any read-modify-write.  The use of atomic_{read,set} doesn't prevent a
read/write or write/write race, so if a race were possible (I'm not saying
one is), then it would still be there even with atomic_set.

See:
http://digitalvampire.org/blog/index.php/2007/05/13/atomic-cargo-cults/

Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:43 -07:00
Daisuke Nishimura 87946a7228 memcg: move charge of file pages
This patch adds support for moving charge of file pages, which include
normal file, tmpfs file and swaps of tmpfs file.  It's enabled by setting
bit 1 of <target cgroup>/memory.move_charge_at_immigrate.

Unlike the case of anonymous pages, file pages(and swaps) in the range
mmapped by the task will be moved even if the task hasn't done page fault,
i.e.  they might not be the task's "RSS", but other task's "RSS" that maps
the same file.  And mapcount of the page is ignored(the page can be moved
even if page_mapcount(page) > 1).  So, conditions that the page/swap
should be met to be moved is that it must be in the range mmapped by the
target task and it must be charged to the old cgroup.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix warning]
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:43 -07:00
Daisuke Nishimura 90254a6583 memcg: clean up move charge
This patch cleans up move charge code by:

- define functions to handle pte for each types, and make
  is_target_pte_for_mc() cleaner.

- instead of checking the MOVE_CHARGE_TYPE_ANON bit, define a function
  that checks the bit.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:43 -07:00
KAMEZAWA Hiroyuki 3c11ecf448 memcg: oom kill disable and oom status
This adds a feature to disable oom-killer for memcg, if disabled, of
course, tasks under memcg will stop.

But now, we have oom-notifier for memcg.  And the world around memcg is
not under out-of-memory.  memcg's out-of-memory just shows memcg hits
limit.  Then, administrator or management daemon can recover the situation
by

	- kill some process
	- enlarge limit, add more swap.
	- migrate some tasks
	- remove file cache on tmps (difficult ?)

Unlike oom-killer, you can take enough information before killing tasks.
(by gcore, or, ps etc.)

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:43 -07:00
KAMEZAWA Hiroyuki 9490ff2756 memcg: oom notifier
Considering containers or other resource management softwares in userland,
event notification of OOM in memcg should be implemented.  Now, memcg has
"threshold" notifier which uses eventfd, we can make use of it for oom
notification.

This patch adds oom notification eventfd callback for memcg.  The usage is
very similar to threshold notifier, but control file is memory.oom_control
and no arguments other than eventfd is required.

	% cgroup_event_notifier /cgroup/A/memory.oom_control dummy
	(About cgroup_event_notifier, see Documentation/cgroup/)

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: David Rientjes <rientjes@google.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:43 -07:00
KAMEZAWA Hiroyuki dc98df5a1b memcg: oom wakeup filter
memcg's oom waitqueue is a system-wide wait_queue (for handling
hierarchy.) So, it's better to add custom wake function and do filtering
in wake up path.

This patch adds a filtering feature for waking up oom-waiters.  Hierarchy
is properly handled.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:43 -07:00
Linus Torvalds f39d01be4c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits)
  vlynq: make whole Kconfig-menu dependant on architecture
  add descriptive comment for TIF_MEMDIE task flag declaration.
  EEPROM: max6875: Header file cleanup
  EEPROM: 93cx6: Header file cleanup
  EEPROM: Header file cleanup
  agp: use NULL instead of 0 when pointer is needed
  rtc-v3020: make bitfield unsigned
  PCI: make bitfield unsigned
  jbd2: use NULL instead of 0 when pointer is needed
  cciss: fix shadows sparse warning
  doc: inode uses a mutex instead of a semaphore.
  uml: i386: Avoid redefinition of NR_syscalls
  fix "seperate" typos in comments
  cocbalt_lcdfb: correct sections
  doc: Change urls for sparse
  Powerpc: wii: Fix typo in comment
  i2o: cleanup some exit paths
  Documentation/: it's -> its where appropriate
  UML: Fix compiler warning due to missing task_struct declaration
  UML: add kernel.h include to signal.c
  ...
2010-05-20 09:20:59 -07:00
KAMEZAWA Hiroyuki 747388d78a memcg: fix css_is_ancestor() RCU locking
Some callers (in memcontrol.c) calls css_is_ancestor() without
rcu_read_lock.  Because css_is_ancestor() has to access RCU protected
data, it should be under rcu_read_lock().

This makes css_is_ancestor() itself does safe access to RCU protected
area.  (At least, "root" can have refcnt==0 if it's not an ancestor of
"child".  So, we need rcu_read_lock().)

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-11 17:33:42 -07:00
KAMEZAWA Hiroyuki 7f0f154641 memcg: fix css_id() RCU locking for real
Commit ad4ba37537 ("memcg: css_id() must be
called under rcu_read_lock()") modifies memcontol.c for fixing RCU check
message.  But Andrew Morton pointed out that the fix doesn't seems sane
and it was just for hidining lockdep messages.

This is a patch for do proper things.  Checking again, all places,
accessing without rcu_read_lock, that commit fixies was intentional....
all callers of css_id() has reference count on it.  So, it's not necessary
to be under rcu_read_lock().

Considering again, we can use rcu_dereference_check for css_id().  We know
css->id is valid if css->refcnt > 0.  (css->id never changes and freed
after css->refcnt going to be 0.)

This patch makes use of rcu_dereference_check() in css_id/depth and remove
unnecessary rcu-read-lock added by the commit.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-11 17:33:42 -07:00
Linus Torvalds 91bc482ec5 Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: create rcu_my_thread_group_empty() wrapper
  memcg: css_id() must be called under rcu_read_lock()
  cgroup: Check task_lock in task_subsys_state()
  sched: Fix an RCU warning in print_task()
  cgroup: Fix an RCU warning in alloc_css_id()
  cgroup: Fix an RCU warning in cgroup_path()
  KEYS: Fix an RCU warning in the reading of user keys
  KEYS: Fix an RCU warning
2010-05-07 13:58:21 -07:00
Paul E. McKenney ad4ba37537 memcg: css_id() must be called under rcu_read_lock()
This patch fixes task_in_mem_cgroup(), mem_cgroup_uncharge_swapcache(),
mem_cgroup_move_swap_account(), and is_target_pte_for_mc() to protect
calls to css_id().  An additional RCU lockdep splat was reported for
memcg_oom_wake_function(), however, this function is not yet in
mainline as of 2.6.34-rc5.

Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
2010-05-04 09:25:03 -07:00
Andrea Arcangeli 93d5c9be1d memcg: fix prepare migration
If a signal is pending (task being killed by sigkill)
__mem_cgroup_try_charge will write NULL into &mem, and css_put will oops
on null pointer dereference.

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
  IP: [<ffffffff810fc6cc>] mem_cgroup_prepare_migration+0x7c/0xc0
  PGD a5d89067 PUD a5d8a067 PMD 0
  Oops: 0000 [#1] SMP
  last sysfs file: /sys/devices/platform/microcode/firmware/microcode/loading
  CPU 0
  Modules linked in: nfs lockd nfs_acl auth_rpcgss sunrpc acpi_cpufreq pcspkr sg [last unloaded: microcode]

  Pid: 5299, comm: largepages Tainted: G        W  2.6.34-rc3 #3 Penryn1600SLI-110dB/To Be Filled By O.E.M.
  RIP: 0010:[<ffffffff810fc6cc>]  [<ffffffff810fc6cc>] mem_cgroup_prepare_migration+0x7c/0xc0

[nishimura@mxp.nes.nec.co.jp: fix merge issues]
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-24 11:31:24 -07:00
Jiri Kosina 6c9468e9eb Merge branch 'master' into for-next 2010-04-23 02:08:44 +02:00
KAMEZAWA Hiroyuki 8725d54162 memcg: fix race in file_mapped accounting
Presently, memcg's FILE_MAPPED accounting has following race with
move_account (happens at rmdir()).

    increment page->mapcount (rmap.c)
    mem_cgroup_update_file_mapped()           move_account()
					      lock_page_cgroup()
					      check page_mapped() if
					      page_mapped(page)>1 {
						FILE_MAPPED -1 from old memcg
						FILE_MAPPED +1 to old memcg
					      }
					      .....
					      overwrite pc->mem_cgroup
					      unlock_page_cgroup()
    lock_page_cgroup()
    FILE_MAPPED + 1 to pc->mem_cgroup
    unlock_page_cgroup()

Then,
	old memcg (-1 file mapped)
	new memcg (+2 file mapped)

This happens because move_account see page_mapped() which is not guarded
by lock_page_cgroup().  This patch adds FILE_MAPPED flag to page_cgroup
and move account information based on it.  Now, all checks are synchronous
with lock_page_cgroup().

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Balbir Singh <balbir@in.ibm.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Andrea Righi <arighi@develer.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-07 08:38:05 -07:00
Dan Carpenter e7bbcdf374 memcontrol: fix potential null deref
There was a potential null deref introduced in c62b1a3b31 ("memcg: use
generic percpu instead of private implementation").

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24 16:31:19 -07:00
Daisuke Nishimura 5cfb80a73b memcg: disable move charge in no mmu case
In commit 02491447 ("memcg: move charges of anonymous swap"), I tried to
disable move charge feature in no mmu case by enclosing all the related
functions with "#ifdef CONFIG_MMU", but the commit places these ifdefs in
wrong place.  (it seems that it's mangled while handling some fixes...)

This patch fixes it up.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24 16:31:19 -07:00
Greg Thelen 320cc51d90 mm: fix typo in refill_stock() comment
Change refill_stock() comment: s/consumt_stock()/consume_stock()/

Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-15 15:27:28 +01:00