Commit Graph

9 Commits

Author SHA1 Message Date
Peter Ujfalusi e327b3f564 Revert "regulator: tps65217: remove tps65217.dtsi file"
This reverts commit 8e6ebfaa9b.

Without the patch reverted regulators will not work. This prevents
MMC to be working for example so the boards can not boot to
MMC rootfs.

Tested it on beaglebone white and bisect also points to the
reverted commit.
The issue can be also fixed by adding "regulator-compatible =" to all board
dts file for the regulators.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-19 09:05:53 -08:00
Sudeep Holla 3efda00129 ARM: dts: am335x: replace gpio-key,wakeup with wakeup-source property
Though the keyboard driver for GPIO buttons(gpio-keys) will continue to
check for/support the legacy "gpio-key,wakeup" boolean property to
enable gpio buttons as wakeup source, "wakeup-source" is the new
standard binding.

This patch replaces the legacy "gpio-key,wakeup" with the unified
"wakeup-source" property in order to avoid any futher copy-paste
duplication.

Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17 09:51:48 -08:00
Peter Ujfalusi b5e5090660 ARM: DTS: am33xx: Use the new DT bindings for the eDMA3
Switch to use the ti,edma3-tpcc and ti,edma3-tptc binding for the eDMA3 and
enable the DMA even crossbar with ti,am335x-edma-crossbar.
With the new bindings boards can customize and tweak the DMA channel
priority to match their needs. With the new binding the memcpy is safe
to be used since with the old binding it was not possible for a driver
to know which channel is allowed to be used as non HW triggered channel.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17 09:43:08 -08:00
Heiko Schocher 8e6ebfaa9b regulator: tps65217: remove tps65217.dtsi file
remove tps65217.dtsi and adapt all boards, which
used it.

Signed-off-by: Heiko Schocher <hs@denx.de>
Tested-by: Keerthy <j-keerthy@ti.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-11-30 14:03:47 -08:00
Javier Martinez Canillas 3eb9d92cd3 ARM: dts: am335x-pepper: Use AM33XX_IOPAD pinmux macro
Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-11-30 08:43:23 -08:00
Adam YH Lee 9908ac3daa ARM: dts: Correct audio input route & set mic bias for am335x-pepper
Audio-in was incorrectly routed to Line In. It should be Mic3L as per
schematic.

Using mic-bias voltage at 2.0v (<0x1>) does not work for some reason. There
is no voltage seen on micbias (R127). Mic-bias voltage of 2.5v (<0x2>) works.
I see voltage of 2.475v across GND and micbias.

With these changes, I can record audio with a pair of proliferate TRRS earbuds.

Signed-off-by: Adam YH Lee <adam.yh.lee@gmail.com>
Acked-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-15 03:03:01 -07:00
Arun Bharadwaj 693f4f4c96 ARM: dts: Fix frequency scaling on Gumstix Pepper
The device tree for Gumstix Pepper has DCDC2 and
DCDC3 correctly labelled but the upper limit values
are wrong. The confusion is due to the hardware
quirk where the DCDC2 and DCDC3 wires are flipped
in Pepper.

Signed-off-by: Arun Bharadwaj <arun@gumstix.com>
Tested-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-14 00:00:46 -07:00
Adam YH Lee 5aed4ee7cc ARM: dts: configure regulators for Gumstix Pepper
Boot process is halting in midway because some of the necessary voltage
regulators are deemed unused and subsequently powered off, leading to
a completely unresponsive system.

Most of the device nodes had correct voltage regulator attachments.
Yet these nodes had to set stricter enforcement on them through
'regulator-boot-on' and 'regulator-always-on' to function correctly.

The consumers of the regulators this commit affect are the followings:

	DCDC1: vdd_1v8 system supply, USB-PHY, and ADC
	DCDC2: Core domain
	DCDC3: MPU core domain
	 LDO1: RTC
	 LDO2: 3v3 IO domain
	 LDO3: USB-PHY; not a boot-time requirement
	 LDO4: LCD [16:23]

All but LDO3 need to be always-on for the system to be functional.

Additionally regulator-name properties have been added for the kernel to
display the name from the schematic. This will improve diagnostics.

Signed-off-by: Adam YH Lee <adam.yh.lee@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-14 00:00:46 -07:00
Ash Charles 4341881d05 ARM: dts: Add devicetree for Gumstix Pepper board
This adds the Gumstix Pepper[1] single-board computer based on the
TI AM335x processor. Schematics are available [2].

[1] https://store.gumstix.com/index.php/products/344/
[2] https://pubs.gumstix.com/boards/PEPPER/

Signed-off-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-09 04:34:19 -07:00