There is no data coming from touchscreen on Panasonic CF-29
notebook unless keyboard controller is in legacy mode.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Have lifebook protocol register 2 separate input devices -
one for the touchscreen reporting absolute coordinates and
touches and another one for touchpad reporting relative
coordinates and left and right button presses.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
It appears that if we turn on 6-byte Lifebook protocol on
Panasonic CF-28 its touchpad is left alone and generates
standard 3-byte PS/2 data stream with relative packets
instead of being converted in 3-byte Lifebook protocol with
absolute coordinates - in other words what get what we need
to distinguish between touchscreen and touchpad.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Panasonic CF18 has an active multiplexing controller with
touchscreen connected to one port and a touchpad to another.
Use "phys" from serio port to activate lifebook protoocol
only on the port that has touchscreen connected to it.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Create platform device for cobalt buttons as part of arch setup.
This makes the driver follow current driver model more closely.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
IRQF_DISABLED is the proper name.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
This patch adds module parameters for several timing values used
in the driver. These values can vary based on the hardware design
and how much capacitive filtering there is on the touch panel inputs,
and the resistance of the panel.
Signed-off-by: Cliff Brake <cbrake@bec-systems.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
In preparation for struct class_device -> struct device input
core conversion, switch to using input_dev->dev.parent when
specifying device position in sysfs tree.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
In preparation for struct class_device -> struct device input
core conversion, switch to using input_dev->dev.parent when
specifying device position in sysfs tree.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
In preparation for struct class_device -> struct device input
core conversion, switch to using input_dev->dev.parent when
specifying device position in sysfs tree.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
In preparation for struct class_device -> struct device input
core conversion, switch to using input_dev->dev.parent when
specifying device position in sysfs tree.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
In preparation for struct class_device -> struct device input
core conversion, switch to using input_dev->dev.parent when
specifying device position in sysfs tree.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
In preparation to switching to struct device and class device
going away provide an alias to allow drivers that create devices
to use either input_dev->cdev.dev or input_dev->dev.parent to
put them into sysfs tree. The former will go away once conversion
to struct device is complete.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
As the number of keymaps increases and is very unlikely to
reduce, this patch helps to reduce memory consumption by
declaring all keymaps as __initdata and copying right keymap
during DMI detection. On x86 this make the module size at
runtime going from 10616 to 9428: a bit more than 1kb saved.
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
It turns out that the keymaps in the wistron driver are almost the
same, the main difference being some keys which may not exist and
leds which might not be present. Therefore it's possible to write
a generic keymap which would allow the use of an unknown keyboard
with little drawbacks. The user can select it specifying the parameter
"keymap=generic".
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acerhk supports already a lot of laptops. Lets import its database so
that everyone can benefit of the work of Olaf Tauber. Only the "tm_new"
laptops were imported. "tm_old" laptops could be possible but requires
more testing and probably only few laptops are still alive. "dritek"
laptops should probably be imported into a different driver. Also compress
the keymaps by fitting each entry on an int. Most of the dmi matching was
written based on google searches, so it's rather prone to errors. That's
why I'm asking people to confirm it works.
Support to generate switch input events was added as some laptops indicate
lid open/close through this interface.
This adds the following hardware:
Acer TravelMate 370
Acer TravelMate 380
Acer TravelMate C300
Acer TravelMate C100
Acer TravelMate C110
Acer TravelMate 250
Acer TravelMate 350
Acer TravelMate 620
Acer TravelMate 630
Acer TravelMate 220
Acer TravelMate 230
Acer TravelMate 260
Acer TravelMate 280
Acer TravelMate 360
Acer TravelMate 2100
Acer TravelMate 2410
Acer Aspire 1500
Acer Aspire 1600
Acer Aspire 3020
Acer Aspire 5020
Medion MD 2900
Medion MD 40100
Medion MD 95400
Medion MD 96500
Fujitsu Siemens Amilo 7820
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
There are mice reporting to logitech's queries with model
of 0. Do not claim that these are Logitech mice.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Disable both keyboard and auxiliary interfaces before switching
to legacy mode to prevent atkbd from getting "empty" interrupts.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Pete Zaitcev reports that with his touchpad, if he lifts the finger
and places it elsewhere, the pointer sometimes warps dramatically.
This happens because we don't store coordinates unless we detect a
touch so sometimes we have stale coordinates in queue (from where
the finger left the pad) and averaging makes cursor to jump across
the screen. The solution is to always store the latest coordinates.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Delete the never-compiled source file drivers/input/power.c, and
remove its entry from the corresponding Makefile, as there is no
Kconfig file that refers to the config option INPUT_POWER
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Encode synaptics model in psmouse->model so it will be
exported via sysfs as input_dev->id.version and become
visible for applications.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Using usb_unlink_urb can cause iforce_open to fail when called
soon after iforce_release. Also updated my email address and
replaced calls to printk() by dbg(), warn(), info(), err()...
Signed-off-by: Johann Deneux <johann.deneux@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
The naming convention in input handlers was very confusing -
client stuctures were called lists, regular lists were also
called lists making anyone looking at the code go mad.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
- consolidate code for binding handlers to a device
- return error codes from handlers connect() methods back to input
core and log failures
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
The UCB1400 is missing a name parameter in the device_driver struct.
This causes missing information in the /sys tree and seems to cause
other problems with the AC97 functionality. This was tested on a PXA270
system.
Signed-off-by: Cliff Brake <cbrake@bec-systems.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This should get rid of "atkbd.c: Suprious NAK on isa0060/serio0"
messages caused by broken MUX implementation. The box does not
have external PS/2 ports so disabling MUX mode is safe.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
When using MS protocol the driver should wait for a byte with
bit 6 set before assuming that it sees beginning of a data packet.
This should allow driver better cope with lost bytes and prevent
spurious left/right button events when serial communication is
disturbed by a CPU-hungry real-time process.
Also fix some formatting.
Signed-off-by: Peter Osterlund <petero2@telia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Now that sysfs attributes that were marked for deletion can't access
their devices we do not need to set name, phys and uniq to NULL.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Allow drivers to implement their own get and set keycode methods. This
will allow drivers to change their keymaps without allocating huge
tables covering entire range of possible scancodes.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Allow ALPS, LOGIPS2PP, LIFEBOOK, TRACKPOINT and TOUCHKIT protocol
extensions of psmouse to be disabled during compilation. This will
allow users save some memory when they are sure that they will only
use a certain type of mice.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Do not assume that AUX_LOOP command is broken unless it
completes successfully but returns wrong (unexpected) data.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Add support for Acer TravelMate 610 to wistron_btns. All special keys
are detected, but the 2 leds are not handled (yet).
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Forcing stream mode after reset confuses some devices (reported
by Andrea Arcangeli) so let's take it out - spec says that after
reset mouse should already be in stream mode.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
The gpio_keys driver is wrongly ARM-specific; it can't build on
other platforms with GPIO suport. This fixes that problem.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: pHilipp Zabel <philipp.zabel@gmail.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Ben Nizette <ben.nizette@iinet.net.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Most drivers using GPIOs already know they are running on a system that
supports the generic GPIO calls, because of other platform dependencies.
But the generic GPIO-based LED and input button drivers can't know that.
So this patch adds a Kconfig hook, GENERIC_GPIO, to mark the platforms
where <asm/gpio.h> will do the right thing. Currently that's a bunch of
ARMs, and AVR32; more are on the way.
It also fixes a dependency bug for the gpio button input driver; it was
wrong to start with, now it covers all platforms with GENERIC_GPIO.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: <raph@8d.com>
Cc: <msvoboda@ra.rockwell.com>
Cc: pHilipp Zabel <philipp.zabel@gmail.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- mark some structures const or __read_mostly
- hilkbd.c: fix uninitialized spinlock in HIL keyboard driver
- hil_mlc.c: use USEC_PER_SEC instead of 1000000
- hp_sdc: bugfix for request_irq()/free_irq() parameters, this prevented
multiple load/unload cycles as module
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
The ads7843 support has now become almost trivial since the last
rework.
Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/dtor/input:
Input: remove obsolete setup parameters from input drivers
Input: HIL - fix improper call to release_region()
Input: hid-lgff - treat devices as joysticks unless told otherwise
Input: HID - add support for Logitech Formula Force EX
Input: gpio-keys - switch to common GPIO API
Input: do not lock device when showing name, phys and uniq
Input: i8042 - let serio bus suspend ports
Input: psmouse - properly reset mouse on shutdown/suspend
Based on the touchkit USB and lifebook PS/2 touchscreen driver.
The egalax touchsreen controller (PS/2 or USB version) is used in this 7"
device: http://www.cartft.com/catalog/il/449
Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Do not call release_region() if the code has been compiled
without CONFIG_HP300 support.
Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
This adds support for at least SA1100 and S3C24xx CPUs.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Now that sysfs attributes return -ENODEV once driver requests their
removal we do not need to handle scenario when data is deleted from
under our feet and can simplify the code.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Let serio subsystem take care of suspending the ports; concentrate
on suspending/resuming the controller itself.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Some people report that they need psmouse module unloaded
for suspend to ram/disk to work properly. Let's make port
cleanup behave the same way as driver unload.
This fixes "bad state" roblem on various HP laptops, such
as nx7400.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
The C99 specification states in section 6.11.5:
The placement of a storage-class specifier other than at the
beginning of the declaration specifiers in a declaration is an
obsolescent feature.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
- hrtimers did not use the hrtimer_restart enum and relied on the implict
int representation. Fix the prototypes and the functions using the enums.
- Use seperate name spaces for the enumerations
- Convert hrtimer_restart macro to inline function
- Add comments
No functional changes.
[akpm@osdl.org: fix input driver]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The obsolete SA_xxx interrupt flags have been used despite the scheduled
removal. Fixup the remaining users in -mm.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there. Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.
To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.
Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm. I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).
Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many struct file_operations in the kernel can be "const". Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data. In addition it'll catch accidental writes at compile time to
these shared resources.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Delete the few remaining unnecessary calls to memset(0) after a call to
kzalloc().
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On boxes that do not implement AUX LOOP command we can not
verify AUX IRQ delivery and must assume that it is wired
properly.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Change the apparently incorrect check for CONFIG_INPUT_ATIXL
in a source file to be consistent with the kernel config
option CONFIG_MOUSE_ATIXL.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Also some whitespace cleanup.
Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Compaq touchscreen emulation (drivers/input/tsdev.c) is old,
was obsolete when it was written by the authors own admission
and much better userspace solutions like tslib now exist.
The name is also confusing.
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
This patch adds support for the buttons on the Atlas wallmount
touchscreen.
Signed-off-by: Jaya Kumar <jayakumar.acpi@gmail.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
This adds the module name to all SERIO drivers, if they are built into
the kernel or not. It will show up in /sys/modules/MODULE_NAME/drivers/
Cc: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
- Hook up to hwmon
* show sensor attributes only if hwmon is present
* ... and the board's reference voltage is known
* otherwise be just a touchscreen
- Report voltages per hwmon convention
* measure in millivolts
* voltages are named in[0-8]_input (ugh)
* for 7846 chips, properly range-adjust vBATT/in1_input
Battery measurements help during recharge monitoring. On OSK/Mistral,
the measured voltage agreed with a multimeter to several decimal places.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
We can't depend on the pressure value to determine when the pen was
lifted, so use the GPIO line state instead. This also helps with
chips (like ads7843) that don't have pressure sensors.
Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Talk to ADS7846 chip using SPI mode 1, which is what the chip
supports: writes on falling clock edge, reads on rising.
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Use hrtimer instead of the normal timer, since it provides better
sampling resolution. This will:
- avoid a problem where we have a 1 jiffy poll period and
dynamic tick on
- utilize high resolution HW clocks when they are added to
the hrtimer framework
Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
On some LCDs leaving the Vref on provides much better readings.
Signed-off-by: Jarkko Oikarinen <jarkko.oikarinen@nokia.com>
Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Some LCDs like the LS041Y3 require a customized filtering
logic for reliable readings, so make the filtering function
replacable through platform specific hooks.
Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
This is an interrupt-driven keyboard driver for simple buttons
connected directly to CPU GPIO lines of embedded ARM systems.
It supports pxa architectures and is used by a number of PDAs
and PocketPC phones in the handhelds.org kernel. Support for
other architectures, such as sa11xx and sc2410, will be added
once generic GPIO API is available.
Signed-off-by: Paul Sokolovsky <pmiscml@gmail.com>
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
On some boxes panic blink procedure manages to send both bytes
to keyboard contoller before getting first ACK so we need to
make i8042_suppress_kbd_ack a counter instead of boolean.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
We need to pass in the resource otherwise we cannot
release the region properly. We must know whether it is
an I/O or MEM resource.
Spotted by Eric Brower.
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver should return -ENODEV rather than -ENOENT when it
detects a PCI device in the box.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
"sunkbd_enable(sunkbd, 0);" has no effect. Adding "sunkbd->enabled =
enable" in sunkbd_enable (obvious)
Signed-off-by: Fabrice Knevez <nuxdoors@cegetel.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that it's built on m68k too...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Commit 2d4ba4a3b9 introduced a dependency
that was never meant to exist when the ac97_bus.c module was created.
Move ac97_bus.c up the directory hierarchy to make sure it is built when
selected even if sound is configured out so things work as originally
intended.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This driver is an AC97 codec according to its help text. However, if SOUND is
disabled, the "select SND_AC97_BUS" still inserts that into the .config file:
#
# Sound
#
# CONFIG_SOUND is not set
CONFIG_SND_AC97_BUS=m
Even if the config software followed dependency chains on selects, we should
try to limit usage of "select" to library-type code that is needed (e.g., CRC
functions) instead of bus-type support.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This modifies Makefiles and Kconfigs to properly reflect the creation of
generic HID layer.
It also removes the dependency of BROKEN, which was introduced by the
first patch in series (see the comment). Also updates credits.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The bus for this was removed entirely some time ago, as well as most
of the drivers that referenced it. maple_keyb seems to have been the
odd one out, and was still sitting in the source tree (though not
actually part of the build system). Kill off the rest of it..
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
We already had entry for Fujitsu Lifebook P7010 in the nomux
blacklist but for some reason Fujitsu decided to fiddle with
DMI data...
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Clean up several code points in which the return code from misc_register is
not handled properly.
Several modules failed to deregister various hooks when misc_register fails,
and this patch cleans them up. Also there are a few modules that legitimately
don't care about the failure status of misc register. These drivers however
unilaterally call misc_deregister on module unload.
Since misc_register doesn't initialize the list_head in the init_routine if it
fails, the deregister operation is at risk for oopsing when list_del is
called. The initial solution was to manually init the list in the miscdev
structure in each of those modules, but the consensus in this thread was to
consolodate and do that universally inside misc_register.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Kylene Jo Hall <kjhall@us.ibm.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Olaf Hering <olh@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move process freezing functions from include/linux/sched.h to freezer.h, so
that modifications to the freezer or the kernel configuration don't require
recompiling just about everything.
[akpm@osdl.org: fix ueagle driver]
Signed-off-by: Nigel Cunningham <nigel@suspend2.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
SLAB_KERNEL is an alias of GFP_KERNEL.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Conflicts:
drivers/infiniband/core/iwcm.c
drivers/net/chelsio/cxgb2.c
drivers/net/wireless/bcm43xx/bcm43xx_main.c
drivers/net/wireless/prism54/islpci_eth.c
drivers/usb/core/hub.h
drivers/usb/input/hid-core.c
net/core/netpoll.c
Fix up merge failures with Linus's head and fix new compilation failures.
Signed-Off-By: David Howells <dhowells@redhat.com>
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (103 commits)
usbcore: remove unused argument in autosuspend
USB: keep count of unsuspended children
USB hub: simplify remote-wakeup handling
USB: struct usb_device: change flag to bitflag
OHCI: make autostop conditional on CONFIG_PM
USB: Add autosuspend support to the hub driver
EHCI: Fix root-hub and port suspend/resume problems
USB: create a new thread for every USB device found during the probe sequence
USB: add driver for the USB debug devices
USB: added dynamic major number for USB endpoints
USB: pegasus error path not resetting task's state
USB: endianness fix for asix.c
USB: build the appledisplay driver
USB serial: replace kmalloc+memset with kzalloc
USB: hid-core: canonical defines for Apple USB device IDs
USB: idmouse cleanup
USB: make drivers/usb/core/driver.c:usb_device_match() static
USB: lh7a40x_udc remove double declaration
USB: pxa2xx_udc recognizes ixp425 rev b0 chip
usbtouchscreen: add support for DMC TSC-10/25 devices
...
This also ment that some of the misc drivers had to also be fixed
up as they were assuming the device was a class_device.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add input subsystem to kernel-api docbook.
Enhance some function and parameter comments.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
The keyboard is connected via GPIOs to the processor, and scanned
using a column sample register. The hardware provides no debouncing
mechanism, so the state of the keys is read KBDSCAN_STABLE_COUNT
times before being reported to the input layer.
The status of the keys needs to be polled because there is no
interrupt hooked to the lines. A workqueue is used for this.
Signed-off-by: Nicolas Bellido Y Ortega <ml@acolin.be>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Perform actual driver registration right in serio_register_driver()
instead of offloading it to kseriod and return proper error code to
callers if driver registration fails.
Note that driver <-> port matching is still done by kseriod to
speed up boot process since probing for PS/2 mice and keyboards
is pretty slow.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Pass the work_struct pointer to the work function rather than context data.
The work function can use container_of() to work out the data.
For the cases where the container of the work_struct may go away the moment the
pending bit is cleared, it is made possible to defer the release of the
structure by deferring the clearing of the pending bit.
To make this work, an extra flag is introduced into the management side of the
work_struct. This governs auto-release of the structure upon execution.
Ordinarily, the work queue executor would release the work_struct for further
scheduling or deallocation by clearing the pending bit prior to jumping to the
work function. This means that, unless the driver makes some guarantee itself
that the work_struct won't go away, the work function may not access anything
else in the work_struct or its container lest they be deallocated.. This is a
problem if the auxiliary data is taken away (as done by the last patch).
However, if the pending bit is *not* cleared before jumping to the work
function, then the work function *may* access the work_struct and its container
with no problems. But then the work function must itself release the
work_struct by calling work_release().
In most cases, automatic release is fine, so this is the default. Special
initiators exist for the non-auto-release case (ending in _NAR).
Signed-Off-By: David Howells <dhowells@redhat.com>
I moved to a different town and my old snail-mail address is invalid
now. Also, there's no need at all to have any address like that in
the sources, so remove it completely.
Signed-off-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
MUX error handling has a workaround for KBCs that get confused which
port data came from and signal MUXERR while data is actually good.
Unfortunately this workaround hurts with KBCs that signal timeouts
as 0xfc (spec says that only 0xfd, 0xfe and 0xff are alowed with
MUXERR) since it causes endless attempts to rescan i8042 serio
ports. The solution is to treat 0xfc as timeout (0xfe).
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
In mousedev the BTN_LEFT and BTN_FORWARD were mapped to mouse button 0,
causing that the user space program cannot distinguish between them through
/dev/input/mice. All mice have BTN_LEFT, but not all have BTN_MIDDLE (e.g.
Clevo D410J laptop). Mapping BTN_FORWARD to mouse button 2 makes the
BTN_FORWARD button useful on this laptop.
Signed-off-by: Marton Nemeth <nm127@freemail.hu>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
psmouse_show_int_attr() and psmouse_set_int_attr() were accessing
unsigned int fields as unsigned long, which gave garbage on x86_64.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Also use kzalloc instead of kcalloc since we are allocating single object.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Remove call to i8042_interrupt() from i8042_aux_write(). According
to Vojtech it may cause problems with older controllers if it is
called right after real interrupt. Also it is not needed anymore
since we register IRQs early and not waiting for serio ports to
be opened.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
This adds another DMI detected touchscreen. It is exactly the same
driver as the existing ones, but this allows it to be detected on the
Hitachi Flora-IE 55mi tablet. The original Midori drivers are "abeo
antiquus". This should allow new life for these machines.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Initialize serio_bus structure at compile time instead of at runtime
in serio_init().
Signed-off-by: Marton Nemeth <nm127@freemail.hu>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Now with the ide.h mess sorted out, most of these boards
don't need their own directory. Move the headers out, and
update the driver paths.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The Zaurii drivers were partially fixed up for the IRQ register
changes, but unfortunately missed some bits, resulting in build
errors. Fix these.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
In preparation for moving check_signature, change these users from asm/io.h
to linux/io.h
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Many users seems to be annoyed by this warning so kill the message
and implement a counter exported as a sysfs attribute so we still
know what is going on. Make atkbd use attribute groups while we are
at it.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Enable HIL configuration options on HP300
Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.
The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).
Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.
Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.
I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.
This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().
Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.
(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.
(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits)
Input: wistron - add support for Acer TravelMate 2424NWXCi
Input: wistron - fix setting up special buttons
Input: add KEY_BLUETOOTH and KEY_WLAN definitions
Input: add new BUS_VIRTUAL bus type
Input: add driver for stowaway serial keyboards
Input: make input_register_handler() return error codes
Input: remove cruft that was needed for transition to sysfs
Input: fix input module refcounting
Input: constify input core
Input: libps2 - rearrange exports
Input: atkbd - support Microsoft Natural Elite Pro keyboards
Input: i8042 - disable MUX mode on Toshiba Equium A110
Input: i8042 - get rid of polling timer
Input: send key up events at disconnect
Input: constify psmouse driver
Input: i8042 - add Amoi to the MUX blacklist
Input: logips2pp - add sugnature 56 (Cordless MouseMan Wheel), cleanup
Input: add driver for Touchwin serial touchscreens
Input: add driver for Touchright serial touchscreens
Input: add driver for Penmount serial touchscreens
...
Dmitry Torokhov