OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
751,955 Commits 4 Branches 0 Tags 2 GiB
f0d98d8583
Commit Graph

9 Commits

Author SHA1 Message Date
Vitaly Kuznetsov
cf21be919c hv_balloon: trace post_status 
Hyper-V balloon driver makes non-trivial calculations to convert Linux's
representation of free/used memory to what Hyper-V host expects to see. Add
a tracepoint to see what's being sent and where the data comes from.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2018-03-06 09:57:17 -08:00
Linus Torvalds
2bf16b7a73 Char/Misc patches for 4.15-rc1 
Here is the big set of char/misc and other driver subsystem patches for
 4.15-rc1.
 
 There are small changes all over here, hyperv driver updates, pcmcia
 driver updates, w1 driver updats, vme driver updates, nvmem driver
 updates, and lots of other little one-off driver updates as well.  The
 shortlog has the full details.
 
 Note, there will be a merge conflict in drivers/misc/lkdtm_core.c when
 merging to your tree as one lkdtm patch came in through the perf tree as
 well as this one.  The resolution is to take the const change that this
 tree provides.
 
 All of these have been in linux-next for quite a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWg2Lnw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymTUwCgwp46+I8yPlgDH8oe5TxyyJnpdHQAn1XW0i+a
 sBi6WS87In5v1QO1Rgfc
 =dH2a
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc updates from Greg KH:
 "Here is the big set of char/misc and other driver subsystem patches
  for 4.15-rc1.

  There are small changes all over here, hyperv driver updates, pcmcia
  driver updates, w1 driver updats, vme driver updates, nvmem driver
  updates, and lots of other little one-off driver updates as well. The
  shortlog has the full details.

  All of these have been in linux-next for quite a while with no
  reported issues"

* tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits)
  VME: Return -EBUSY when DMA list in use
  w1: keep balance of mutex locks and refcnts
  MAINTAINERS: Update VME subsystem tree.
  nvmem: sunxi-sid: add support for A64/H5's SID controller
  nvmem: imx-ocotp: Update module description
  nvmem: imx-ocotp: Enable i.MX7D OTP write support
  nvmem: imx-ocotp: Add i.MX7D timing write clock setup support
  nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function
  nvmem: imx-ocotp: Add support for banked OTP addressing
  nvmem: imx-ocotp: Pass parameters via a struct
  nvmem: imx-ocotp: Restrict OTP write to IMX6 processors
  nvmem: uniphier: add UniPhier eFuse driver
  dt-bindings: nvmem: add description for UniPhier eFuse
  nvmem: set nvmem->owner to nvmem->dev->driver->owner if unset
  nvmem: qfprom: fix different address space warnings of sparse
  nvmem: mtk-efuse: fix different address space warnings of sparse
  nvmem: mtk-efuse: use stack for nvmem_config instead of malloc'ing it
  nvmem: imx-iim: use stack for nvmem_config instead of malloc'ing it
  thunderbolt: tb: fix use after free in tb_activate_pcie_devices
  MAINTAINERS: Add git tree for Thunderbolt development
  ...
 2017-11-16 09:10:59 -08:00
Vitaly Kuznetsov
c9fe0f8fa4 hyper-v: trace vmbus_on_msg_dpc() 
Add tracing subsystem to Hyper-V VMBus module and add tracepoint
to vmbus_on_msg_dpc() which is called when we receive a message from host.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2017-11-04 12:04:24 +01:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2017-11-02 11:10:55 +01:00
Vitaly Kuznetsov
14b50f80c3 Drivers: hv: util: introduce hv_utils_transport abstraction 
The intention is to make KVP/VSS drivers work through misc char devices.
Introduce an abstraction for kernel/userspace communication to make the
migration smoother. Transport operational mode (netlink or char device)
is determined by the first received message. To support driver upgrades
the switch from netlink to chardev operational mode is supported.

Every hv_util daemon is supposed to register 2 callbacks:
1) on_msg() to get notified when the userspace daemon sent a message;
2) on_reset() to get notified when the userspace daemon drops the connection.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Alex Ng <alexng@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2015-05-24 12:17:41 -07:00
K. Y. Srinivasan
01325476d6 Drivers: hv: Implement the file copy service 
Implement the file copy service for Linux guests on Hyper-V. This permits the
host to copy a file (over VMBUS) into the guest. This facility is part of
"guest integration services" supported on the Windows platform.
Here is a link that provides additional details on this functionality:

http://technet.microsoft.com/en-us/library/dn464282.aspx

In V1 version of the patch I have addressed comments from
Olaf Hering <olaf@aepfle.de> and Dan Carpenter <dan.carpenter@oracle.com>

In V2 version of this patch I did some minor cleanup (making some globals
static). In V4 version of the patch I have addressed all of Olaf's
most recent set of comments/concerns.

In V5 version of the patch I had addressed Greg's most recent comments.
I would like to thank Greg for suggesting that I use misc device; it has
significantly simplified the code.

In V6 version of the patch I have cleaned up error message based on Olaf's
comments. I have also rebased the patch based on the current tip.

In this version of the patch, I have addressed the latest comments from Greg.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2014-02-18 10:53:48 -08:00
K. Y. Srinivasan
96dd86fa58 Drivers: hv: Add a new driver to support host initiated backup 
This driver supports host initiated backup of the guest. On Windows guests,
the host can generate application consistent backups using the Windows VSS
framework. On Linux, we ensure that the backup will be file system consistent.
This driver allows the host to initiate a  "Freeze" operation on all the mounted
file systems in the guest. Once the mounted file systems in the guest are frozen,
the host snapshots the guest's file systems. Once this is done, the guest's file
systems are "thawed".

This driver has a user-level component (daemon) that invokes the appropriate
operation on all the mounted file systems in response to the requests from
the host. The duration for which the guest is frozen is very short - a few seconds.
During this interval, the diff disk is comitted.

In this version of the patch I have addressed the feedback from Olaf Herring.
Also, some of the connector related issues have been fixed.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2013-03-15 12:12:36 -07:00
K. Y. Srinivasan
9aa8b50b2b Drivers: hv: Add Hyper-V balloon driver 
Add the basic balloon driver. Windows hosts dynamically manage the guest
memory allocation via a combination memory hot add and ballooning. Memory
hot add is used to grow the guest memory upto the maximum memory that can be
allocatted to the guest. Ballooning is used to both shrink as well as expand
up to the max memory. Supporting hot add needs additional support from the
host. We will support hot add when this support is available. For now,
by setting the VM startup memory to the VM  max memory, we can use
ballooning alone to dynamically manage memory allocation amongst
competing guests on a given host.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2012-11-15 15:42:09 -08:00
Greg Kroah-Hartman
46a9719136 Staging: hv: move hyperv code out of staging directory 
After many years wandering the desert, it is finally time for the
Microsoft HyperV code to move out of the staging directory.  Or at least
the core hyperv bus code, and the utility driver, the rest still have
some review to get through by the various subsystem maintainers.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
 2011-10-10 22:52:55 -06:00