Commit Graph

102 Commits

Author SHA1 Message Date
David Howells 07f081fb50 PKCS#7: Add OIDs for sha224, sha284 and sha512 hash algos and use them
Add OIDs for sha224, sha284 and sha512 hash algos and use them to select
the hashing algorithm.  Without this, something like the following error
might get written to dmesg:

[   31.829322] PKCS7: Unknown OID: [32] 2.16.840.1.101.3.4.2.3
[   31.829328] PKCS7: Unknown OID: [180] 2.16.840.1.101.3.4.2.3
[   31.829330] Unsupported digest algo: 55

Where the 55 on the third line is OID__NR indicating an unknown OID.

Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2015-09-01 09:59:20 +10:00
David Howells 772111ab01 PKCS#7: Add MODULE_LICENSE() to test module
Add a MODULE_LICENSE() line to the PKCS#7 test key module to fix this
warning:

	WARNING: modpost: missing MODULE_LICENSE() in
	crypto/asymmetric_keys/pkcs7_test_key.o

Whilst we're at it, also add a module description.

Reported-by: James Morris <jmorris@namei.org>
Signed-off-by: David Howells <dhowells@redhat.com>
2015-08-13 02:51:33 +01:00
David Howells 99db443506 PKCS#7: Appropriately restrict authenticated attributes and content type
A PKCS#7 or CMS message can have per-signature authenticated attributes
that are digested as a lump and signed by the authorising key for that
signature.  If such attributes exist, the content digest isn't itself
signed, but rather it is included in a special authattr which then
contributes to the signature.

Further, we already require the master message content type to be
pkcs7_signedData - but there's also a separate content type for the data
itself within the SignedData object and this must be repeated inside the
authattrs for each signer [RFC2315 9.2, RFC5652 11.1].

We should really validate the authattrs if they exist or forbid them
entirely as appropriate.  To this end:

 (1) Alter the PKCS#7 parser to reject any message that has more than one
     signature where at least one signature has authattrs and at least one
     that does not.

 (2) Validate authattrs if they are present and strongly restrict them.
     Only the following authattrs are permitted and all others are
     rejected:

     (a) contentType.  This is checked to be an OID that matches the
     	 content type in the SignedData object.

     (b) messageDigest.  This must match the crypto digest of the data.

     (c) signingTime.  If present, we check that this is a valid, parseable
     	 UTCTime or GeneralTime and that the date it encodes fits within
     	 the validity window of the matching X.509 cert.

     (d) S/MIME capabilities.  We don't check the contents.

     (e) Authenticode SP Opus Info.  We don't check the contents.

     (f) Authenticode Statement Type.  We don't check the contents.

     The message is rejected if (a) or (b) are missing.  If the message is
     an Authenticode type, the message is rejected if (e) is missing; if
     not Authenticode, the message is rejected if (d) - (f) are present.

     The S/MIME capabilities authattr (d) unfortunately has to be allowed
     to support kernels already signed by the pesign program.  This only
     affects kexec.  sign-file suppresses them (CMS_NOSMIMECAP).

     The message is also rejected if an authattr is given more than once or
     if it contains more than one element in its set of values.

 (3) Add a parameter to pkcs7_verify() to select one of the following
     restrictions and pass in the appropriate option from the callers:

     (*) VERIFYING_MODULE_SIGNATURE

	 This requires that the SignedData content type be pkcs7-data and
	 forbids authattrs.  sign-file sets CMS_NOATTR.  We could be more
	 flexible and permit authattrs optionally, but only permit minimal
	 content.

     (*) VERIFYING_FIRMWARE_SIGNATURE

	 This requires that the SignedData content type be pkcs7-data and
	 requires authattrs.  In future, this will require an attribute
	 holding the target firmware name in addition to the minimal set.

     (*) VERIFYING_UNSPECIFIED_SIGNATURE

	 This requires that the SignedData content type be pkcs7-data but
	 allows either no authattrs or only permits the minimal set.

     (*) VERIFYING_KEXEC_PE_SIGNATURE

	 This only supports the Authenticode SPC_INDIRECT_DATA content type
	 and requires at least an SpcSpOpusInfo authattr in addition to the
	 minimal set.  It also permits an SPC_STATEMENT_TYPE authattr (and
	 an S/MIME capabilities authattr because the pesign program doesn't
	 remove these).

     (*) VERIFYING_KEY_SIGNATURE
     (*) VERIFYING_KEY_SELF_SIGNATURE

	 These are invalid in this context but are included for later use
	 when limiting the use of X.509 certs.

 (4) The pkcs7_test key type is given a module parameter to select between
     the above options for testing purposes.  For example:

	echo 1 >/sys/module/pkcs7_test_key/parameters/usage
	keyctl padd pkcs7_test foo @s </tmp/stuff.pkcs7

     will attempt to check the signature on stuff.pkcs7 as if it contains a
     firmware blob (1 being VERIFYING_FIRMWARE_SIGNATURE).

Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-12 17:01:01 +01:00
David Howells f29299b480 KEYS: Add a name for PKEY_ID_PKCS7
Add a name for PKEY_ID_PKCS7 into the pkey_id_type_name array.

Signed-off-by: David Howells <dhowells@redhat.com>
2015-08-12 17:01:01 +01:00
David Howells fd19a3d195 PKCS#7: Improve and export the X.509 ASN.1 time object decoder
Make the X.509 ASN.1 time object decoder fill in a time64_t rather than a
struct tm to make comparison easier (unfortunately, this makes readable
display less easy) and export it so that it can be used by the PKCS#7 code
too.

Further, tighten up its parsing to reject invalid dates (eg. weird
characters, non-existent hour numbers) and unsupported dates (eg. timezones
other than 'Z' or dates earlier than 1970).

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-12 17:01:01 +01:00
David Howells 60d65cacd7 PKCS#7: Support CMS messages also [RFC5652]
Since CMS is an evolution of PKCS#7, with much of the ASN.1 being
compatible, add support for CMS signed-data messages also [RFC5652 sec 5].

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-By: David Woodhouse <David.Woodhouse@intel.com>
2015-08-12 17:01:01 +01:00
David Howells a4c6e57f4f X.509: Change recorded SKID & AKID to not include Subject or Issuer
The key identifiers fabricated from an X.509 certificate are currently:

 (A) Concatenation of serial number and issuer

 (B) Concatenation of subject and subjectKeyID (SKID)

When verifying one X.509 certificate with another, the AKID in the target
can be used to match the authoritative certificate.  The AKID can specify
the match in one or both of two ways:

 (1) Compare authorityCertSerialNumber and authorityCertIssuer from the AKID
     to identifier (A) above.

 (2) Compare keyIdentifier from the AKID plus the issuer from the target
     certificate to identifier (B) above.

When verifying a PKCS#7 message, the only available comparison is between
the IssuerAndSerialNumber field and identifier (A) above.

However, a subsequent patch adds CMS support.  Whilst CMS still supports a
match on IssuerAndSerialNumber as for PKCS#7, it also supports an
alternative - which is the SubjectKeyIdentifier field.  This is used to
match to an X.509 certificate on the SKID alone.  No subject information is
available to be used.

To this end change the fabrication of (B) above to be from the X.509 SKID
alone.  The AKID in keyIdentifier form then only matches on that and does
not include the issuer.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-By: David Woodhouse <David.Woodhouse@intel.com>
2015-08-12 17:01:01 +01:00
David Howells 2c7fd3675e PKCS#7: Check content type and versions
We only support PKCS#7 signed-data [RFC2315 sec 9] content at the top level,
so reject anything else.  Further, check that the version numbers in
SignedData and SignerInfo are 1 in both cases.

Note that we don't restrict the inner content type.  In the PKCS#7 code we
don't parse the data attached there, but merely verify the signature over
it.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-By: David Woodhouse <David.Woodhouse@intel.com>
2015-08-12 17:01:00 +01:00
David Howells 4ebdb76f7d PKCS#7: Allow detached data to be supplied for signature checking purposes
It is possible for a PKCS#7 message to have detached data.  However, to verify
the signatures on a PKCS#7 message, we have to be able to digest the data.
Provide a function to supply that data.  An error is given if the PKCS#7
message included embedded data.

This is used in a subsequent patch to supply the data to module signing where
the signature is in the form of a PKCS#7 message with detached data, whereby
the detached data is the module content that is signed.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
2015-08-07 16:26:13 +01:00
David Howells 4573b64a31 X.509: Support X.509 lookup by Issuer+Serial form AuthorityKeyIdentifier
If an X.509 certificate has an AuthorityKeyIdentifier extension that provides
an issuer and serialNumber, then make it so that these are used in preference
to the keyIdentifier field also held therein for searching for the signing
certificate.

If both the issuer+serialNumber and the keyIdentifier are supplied, then the
certificate is looked up by the former but the latter is checked as well.  If
the latter doesn't match the subjectKeyIdentifier of the parent certificate,
EKEYREJECTED is returned.

This makes it possible to chain X.509 certificates based on the issuer and
serialNumber fields rather than on subjectKeyIdentifier.  This is necessary as
we are having to deal with keys that are represented by X.509 certificates
that lack a subjectKeyIdentifier.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
2015-08-07 16:26:13 +01:00
David Howells b92e6570a9 X.509: Extract both parts of the AuthorityKeyIdentifier
Extract both parts of the AuthorityKeyIdentifier, not just the keyIdentifier,
as the second part can be used to match X.509 certificates by issuer and
serialNumber.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
2015-08-07 16:26:13 +01:00
Linus Torvalds 9d86b4128c Fix up implicit <module.h> users that will break later.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVkO2uAAoJEOvOhAQsB9HWOT0P/jvFrpj2iuWqdMcvBuMdlx6K
 /9qiMsOStbxmbmjj3RsbFCkeHJMUBCI0ZVrIosdEyeZWx33fHkZJisvN1i1PMA63
 qppcZtkGxSmCOi6+e9k+qZNBvKBWy2oCXyLx7zaUKkWuR7wGe9488+9dqd9x+/gu
 i/HTvf8Omrukwko2a0omWUSmUimhveb/hQ7Vxc/M9lbxFeO3jMabV5ZzgfnoTTrh
 Rd2zo4kGbhj8nxonCUHgamnk6hoTE3KYhBPvqohzTDSTALmZVxhCwaQzQWzq+kdl
 oSLa+tik508/csh98tN9dlMkJReHlDNdJIbfazQ1vHI00T5PsQELexFT02iKBhS7
 5mdHSPp5P1TgGB6Fk3lN+hVO6Ja0S/vmJUi72M2y5DPd55lnvOaCVuqzWIJTYOoN
 tqllBH4WIz27hsJWiMLgkJQaDxfBFYx104tOq56s5SeOthBluSE2xoNDrzZGyvRh
 NeVza4ccgxIj0p2xfgeErx89r4GSCNk/LakpcMJReaT7ri23mTCDZJNLMcVW7BYm
 2MW6M3LF748eN3P2YyNnU+TeQNpIho4whuwfOV+uR4tpdd5MtMaObWimwxBN7URM
 LeW3gIwsZFHxYU9NLeZoQZVi6gDmaVe7ma82AbHXaV/mQVYsSP9M6gCO+FASCTGt
 Rz6Nyl4/Ns8rdXUoOud8
 =qotW
 -----END PGP SIGNATURE-----

Merge tag 'module-implicit-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

Pull implicit module.h fixes from Paul Gortmaker:
 "Fix up implicit <module.h> users that will break later.

  The files changed here are simply modular source files that are
  implicitly relying on <module.h> being present.  We fix them up now,
  so that we can decouple some of the module related init code from the
  core init code in the future.

  The addition of the module.h include to several files here is also a
  no-op from a code generation point of view, else there would already
  be compile issues with these files today.

  There may be lots more implicit includes of <module.h> in tree, but
  these are the ones that extensive build test coverage has shown that
  must be fixed in order to avoid build breakage fallout for the pending
  module.h <---> init.h code relocation we desire to complete"

* tag 'module-implicit-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  frv: add module.h to mb93090-mb00/flash.c to avoid compile fail
  drivers/cpufreq: include <module.h> for modular exynos-cpufreq.c code
  drivers/staging: include <module.h> for modular android tegra_ion code
  crypto/asymmetric_keys: pkcs7_key_type needs module.h
  sh: mach-highlander/psw.c is tristate and should use module.h
  drivers/regulator: include <module.h> for modular max77802 code
  drivers/pcmcia: include <module.h> for modular xxs1500_ss code
  drivers/hsi: include <module.h> for modular omap_ssi code
  drivers/gpu: include <module.h> for modular rockchip code
  drivers/gpio: include <module.h> for modular crystalcove code
  drivers/clk: include <module.h> for clk-max77xxx modular code
2015-07-02 10:25:22 -07:00
Linus Torvalds e22619a29f Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
 "The main change in this kernel is Casey's generalized LSM stacking
  work, which removes the hard-coding of Capabilities and Yama stacking,
  allowing multiple arbitrary "small" LSMs to be stacked with a default
  monolithic module (e.g.  SELinux, Smack, AppArmor).

  See
        https://lwn.net/Articles/636056/

  This will allow smaller, simpler LSMs to be incorporated into the
  mainline kernel and arbitrarily stacked by users.  Also, this is a
  useful cleanup of the LSM code in its own right"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (38 commits)
  tpm, tpm_crb: fix le64_to_cpu conversions in crb_acpi_add()
  vTPM: set virtual device before passing to ibmvtpm_reset_crq
  tpm_ibmvtpm: remove unneccessary message level.
  ima: update builtin policies
  ima: extend "mask" policy matching support
  ima: add support for new "euid" policy condition
  ima: fix ima_show_template_data_ascii()
  Smack: freeing an error pointer in smk_write_revoke_subj()
  selinux: fix setting of security labels on NFS
  selinux: Remove unused permission definitions
  selinux: enable genfscon labeling for sysfs and pstore files
  selinux: enable per-file labeling for debugfs files.
  selinux: update netlink socket classes
  signals: don't abuse __flush_signals() in selinux_bprm_committed_creds()
  selinux: Print 'sclass' as string when unrecognized netlink message occurs
  Smack: allow multiple labels in onlycap
  Smack: fix seq operations in smackfs
  ima: pass iint to ima_add_violation()
  ima: wrap event related data to the new ima_event_data structure
  integrity: add validity checks for 'path' parameter
  ...
2015-06-27 13:26:03 -07:00
Guenter Roeck 2cdcc357c2 crypto: asymmetric_keys/rsa - Use non-conflicting variable name
arm64:allmodconfig fails to build as follows.

In file included from include/acpi/platform/aclinux.h:74:0,
                 from include/acpi/platform/acenv.h:173,
                 from include/acpi/acpi.h:56,
                 from include/linux/acpi.h:37,
                 from ./arch/arm64/include/asm/dma-mapping.h:21,
                 from include/linux/dma-mapping.h:86,
                 from include/linux/skbuff.h:34,
                 from include/crypto/algapi.h:18,
                 from crypto/asymmetric_keys/rsa.c:16:
include/linux/ctype.h:15:12: error: expected ‘;’, ‘,’ or ‘)’
		before numeric constant
 #define _X 0x40 /* hex digit */
            ^
crypto/asymmetric_keys/rsa.c:123:47: note: in expansion of macro ‘_X’
 static int RSA_I2OSP(MPI x, size_t xLen, u8 **_X)
                                               ^
crypto/asymmetric_keys/rsa.c: In function ‘RSA_verify_signature’:
crypto/asymmetric_keys/rsa.c:256:2: error:
		implicit declaration of function ‘RSA_I2OSP’

The problem is caused by an unrelated include file change, resulting in
the inclusion of ctype.h on arm64. This in turn causes the local variable
_X to conflict with macro _X used in ctype.h.

Fixes: b6197b93fa ("arm64 : Introduce support for ACPI _CCA object")
Cc: Suthikulpanit, Suravee <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-25 23:18:33 +08:00
Paul Gortmaker 88775588b7 crypto/asymmetric_keys: pkcs7_key_type needs module.h
This driver builds off of the tristate CONFIG_PKCS7_TEST_KEY and calls
module_init and module_exit. So it should explicitly include module.h
to avoid compile breakage during header shuffles done in the future.

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2015-06-16 14:12:26 -04:00
Mimi Zohar f2b3dee484 KEYS: fix "ca_keys=" partial key matching
The call to asymmetric_key_hex_to_key_id() from ca_keys_setup()
silently fails with -ENOMEM.  Instead of dynamically allocating
memory from a __setup function, this patch defines a variable
and calls __asymmetric_key_hex_to_key_id(), a new helper function,
directly.

This bug was introduced by 'commit 46963b774d ("KEYS: Overhaul
key identification when searching for asymmetric keys")'.

Changelog:
- for clarification, rename hexlen to asciihexlen in
  asymmetric_key_hex_to_key_id()
- add size argument to __asymmetric_key_hex_to_key_id() - David Howells
- inline __asymmetric_key_hex_to_key_id() - David Howells
- remove duplicate strlen() calls

Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # 3.18
2015-05-21 13:58:59 -04:00
Linus Torvalds 5e40d331bd Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris.

Mostly ima, selinux, smack and key handling updates.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (65 commits)
  integrity: do zero padding of the key id
  KEYS: output last portion of fingerprint in /proc/keys
  KEYS: strip 'id:' from ca_keyid
  KEYS: use swapped SKID for performing partial matching
  KEYS: Restore partial ID matching functionality for asymmetric keys
  X.509: If available, use the raw subjKeyId to form the key description
  KEYS: handle error code encoded in pointer
  selinux: normalize audit log formatting
  selinux: cleanup error reporting in selinux_nlmsg_perm()
  KEYS: Check hex2bin()'s return when generating an asymmetric key ID
  ima: detect violations for mmaped files
  ima: fix race condition on ima_rdwr_violation_check and process_measurement
  ima: added ima_policy_flag variable
  ima: return an error code from ima_add_boot_aggregate()
  ima: provide 'ima_appraise=log' kernel option
  ima: move keyring initialization to ima_init()
  PKCS#7: Handle PKCS#7 messages that contain no X.509 certs
  PKCS#7: Better handling of unsupported crypto
  KEYS: Overhaul key identification when searching for asymmetric keys
  KEYS: Implement binary asymmetric key ID handling
  ...
2014-10-12 10:13:55 -04:00
Dmitry Kasatkin d401658985 KEYS: output last portion of fingerprint in /proc/keys
Previous version of KEYS used to output last 4 bytes of fingerprint.
Now it outputs 8 last bytes of raw subject, which does not make any
visual meaning at all. This patch restores old behavior.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2014-10-06 17:33:27 +01:00
Dmitry Kasatkin 7a224e783a KEYS: strip 'id:' from ca_keyid
The 'id:' prefix must be stripped for asymmetric_key_hex_to_key_id() to be
able to process ca_keyid.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2014-10-06 17:33:27 +01:00
Dmitry Kasatkin 8dd609805b KEYS: use swapped SKID for performing partial matching
Earlier KEYS code used pure subject key identifiers (fingerprint)
for searching keys. Latest merged code removed that and broke
compatibility with integrity subsytem signatures and original
format of module signatures.

This patch returns back partial matching on SKID.

Reported-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2014-10-06 16:56:08 +01:00
Dmitry Kasatkin f1b731dbc2 KEYS: Restore partial ID matching functionality for asymmetric keys
Bring back the functionality whereby an asymmetric key can be matched with a
partial match on one of its IDs.

Whilst we're at it, allow for the possibility of having an increased number of
IDs.

Reported-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2014-10-06 15:21:05 +01:00
David Howells dd2f6c4481 X.509: If available, use the raw subjKeyId to form the key description
Module signing matches keys by comparing against the key description exactly.
However, the way the key description gets constructed got changed to be
composed of the subject name plus the certificate serial number instead of the
subject name and the subjectKeyId.  I changed this to avoid problems with
certificates that don't *have* a subjectKeyId.

Instead, if available, use the raw subjectKeyId to form the key description
and only use the serial number if the subjectKeyId doesn't exist.

Reported-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2014-10-03 16:17:02 +01:00
Dmitry Kasatkin 40b50e80c5 KEYS: handle error code encoded in pointer
If hexlen is odd then function returns an error.
Use IS_ERR to check for error, otherwise invalid pointer
is used and kernel gives oops:

[  132.816522] BUG: unable to handle kernel paging request at
ffffffffffffffea
[  132.819902] IP: [<ffffffff812bfc20>] asymmetric_key_id_same+0x14/0x36
[  132.820302] PGD 1a12067 PUD 1a14067 PMD 0
[  132.820302] Oops: 0000 [#1] SMP
[  132.820302] Modules linked in: bridge(E) stp(E) llc(E) evdev(E)
serio_raw(E) i2c_piix4(E) button(E) fuse(E)
[  132.820302] CPU: 0 PID: 2993 Comm: cat Tainted: G            E
3.16.0-kds+ #2847
[  132.820302] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  132.820302] task: ffff88004249a430 ti: ffff880056640000 task.ti:
ffff880056640000
[  132.820302] RIP: 0010:[<ffffffff812bfc20>]  [<ffffffff812bfc20>]
asymmetric_key_id_same+0x14/0x36
[  132.820302] RSP: 0018:ffff880056643930  EFLAGS: 00010246
[  132.820302] RAX: 0000000000000000 RBX: ffffffffffffffea RCX:
ffff880056643ae0
[  132.820302] RDX: 000000000000005e RSI: ffffffffffffffea RDI:
ffff88005bac9300
[  132.820302] RBP: ffff880056643948 R08: 0000000000000003 R09:
00000007504aa01a
[  132.820302] R10: 0000000000000000 R11: 0000000000000000 R12:
ffff88005d68ca40
[  132.820302] R13: 0000000000000101 R14: 0000000000000000 R15:
ffff88005bac5280
[  132.820302] FS:  00007f67a153c740(0000) GS:ffff88005da00000(0000)
knlGS:0000000000000000
[  132.820302] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  132.820302] CR2: ffffffffffffffea CR3: 000000002e663000 CR4:
00000000000006f0
[  132.820302] Stack:
[  132.820302]  ffffffff812bfc66 ffff880056643ae0 ffff88005bac5280
ffff880056643958
[  132.820302]  ffffffff812bfc9d ffff880056643980 ffffffff812971d9
ffff88005ce930c1
[  132.820302]  ffff88005ce930c0 0000000000000000 ffff8800566439c8
ffffffff812fb753
[  132.820302] Call Trace:
[  132.820302]  [<ffffffff812bfc66>] ? asymmetric_match_key_ids+0x24/0x42
[  132.820302]  [<ffffffff812bfc9d>] asymmetric_key_cmp+0x19/0x1b
[  132.820302]  [<ffffffff812971d9>] keyring_search_iterator+0x74/0xd7
[  132.820302]  [<ffffffff812fb753>] assoc_array_subtree_iterate+0x67/0xd2
[  132.820302]  [<ffffffff81297165>] ? key_default_cmp+0x20/0x20
[  132.820302]  [<ffffffff812fbaa1>] assoc_array_iterate+0x19/0x1e
[  132.820302]  [<ffffffff81297332>] search_nested_keyrings+0xf6/0x2b6
[  132.820302]  [<ffffffff810728da>] ? sched_clock_cpu+0x91/0xa2
[  132.820302]  [<ffffffff810860d2>] ? mark_held_locks+0x58/0x6e
[  132.820302]  [<ffffffff810a137d>] ? current_kernel_time+0x77/0xb8
[  132.820302]  [<ffffffff81297871>] keyring_search_aux+0xe1/0x14c
[  132.820302]  [<ffffffff812977fc>] ? keyring_search_aux+0x6c/0x14c
[  132.820302]  [<ffffffff8129796b>] keyring_search+0x8f/0xb6
[  132.820302]  [<ffffffff812bfc84>] ? asymmetric_match_key_ids+0x42/0x42
[  132.820302]  [<ffffffff81297165>] ? key_default_cmp+0x20/0x20
[  132.820302]  [<ffffffff812ab9e3>] asymmetric_verify+0xa4/0x214
[  132.820302]  [<ffffffff812ab90e>] integrity_digsig_verify+0xb1/0xe2
[  132.820302]  [<ffffffff812abe41>] ? evm_verifyxattr+0x6a/0x7a
[  132.820302]  [<ffffffff812b0390>] ima_appraise_measurement+0x160/0x370
[  132.820302]  [<ffffffff81161db2>] ? d_absolute_path+0x5b/0x7a
[  132.820302]  [<ffffffff812ada30>] process_measurement+0x322/0x404

Reported-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2014-10-03 13:41:51 +01:00
David Howells d1ac554045 KEYS: Check hex2bin()'s return when generating an asymmetric key ID
As it stands, the code to generate an asymmetric key ID prechecks the hex
string it is given whilst determining the length, before it allocates the
buffer for hex2bin() to translate into - which mean that checking the result of
hex2bin() is redundant.

Unfortunately, hex2bin() is marked as __must_check, which means that the
following warning may be generated if the return value isn't checked:

	crypto/asymmetric_keys/asymmetric_type.c: In function
	asymmetric_key_hex_to_key_id:
	crypto/asymmetric_keys/asymmetric_type.c:110: warning: ignoring return
	value of hex2bin, declared with attribute warn_unused_result

The warning can't be avoided by casting the result to void.

Instead, use strlen() to check the length of the string and ignore the fact
that the string might not be entirely valid hex until after the allocation has
been done - in which case we can use the result of hex2bin() for this.

Signed-off-by: David Howells <dhowells@redhat.com>
2014-09-22 00:02:01 +01:00
David Howells 757932e6da PKCS#7: Handle PKCS#7 messages that contain no X.509 certs
The X.509 certificate list in a PKCS#7 message is optional.  To save space, we
can omit the inclusion of any X.509 certificates if we are sure that we can
look the relevant public key up by the serial number and issuer given in a
signed info block.

This also supports use of a signed info block for which we can't find a
matching X.509 cert in the certificate list, though it be populated.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:36:17 +01:00
David Howells 4155942000 PKCS#7: Better handling of unsupported crypto
Provide better handling of unsupported crypto when verifying a PKCS#7 message.
If we can't bridge the gap between a pair of X.509 certs or between a signed
info block and an X.509 cert because it involves some crypto we don't support,
that's not necessarily the end of the world as there may be other ways points
at which we can intersect with a ring of trusted keys.

Instead, only produce ENOPKG immediately if all the signed info blocks in a
PKCS#7 message require unsupported crypto to bridge to the first X.509 cert.
Otherwise, we defer the generation of ENOPKG until we get ENOKEY during trust
validation.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:36:15 +01:00
David Howells 46963b774d KEYS: Overhaul key identification when searching for asymmetric keys
Make use of the new match string preparsing to overhaul key identification
when searching for asymmetric keys.  The following changes are made:

 (1) Use the previously created asymmetric_key_id struct to hold the following
     key IDs derived from the X.509 certificate or PKCS#7 message:

	id: serial number + issuer
	skid: subjKeyId + subject
	authority: authKeyId + issuer

 (2) Replace the hex fingerprint attached to key->type_data[1] with an
     asymmetric_key_ids struct containing the id and the skid (if present).

 (3) Make the asymmetric_type match data preparse select one of two searches:

     (a) An iterative search for the key ID given if prefixed with "id:".  The
     	 prefix is expected to be followed by a hex string giving the ID to
     	 search for.  The criterion key ID is checked against all key IDs
     	 recorded on the key.

     (b) A direct search if the key ID is not prefixed with "id:".  This will
     	 look for an exact match on the key description.

 (4) Make x509_request_asymmetric_key() take a key ID.  This is then converted
     into "id:<hex>" and passed into keyring_search() where match preparsing
     will turn it back into a binary ID.

 (5) X.509 certificate verification then takes the authority key ID and looks
     up a key that matches it to find the public key for the certificate
     signature.

 (6) PKCS#7 certificate verification then takes the id key ID and looks up a
     key that matches it to find the public key for the signed information
     block signature.

Additional changes:

 (1) Multiple subjKeyId and authKeyId values on an X.509 certificate cause the
     cert to be rejected with -EBADMSG.

 (2) The 'fingerprint' ID is gone.  This was primarily intended to convey PGP
     public key fingerprints.  If PGP is supported in future, this should
     generate a key ID that carries the fingerprint.

 (3) Th ca_keyid= kernel command line option is now converted to a key ID and
     used to match the authority key ID.  Possibly this should only match the
     actual authKeyId part and not the issuer as well.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:36:13 +01:00
David Howells 7901c1a8ef KEYS: Implement binary asymmetric key ID handling
Implement the first step in using binary key IDs for asymmetric keys rather
than hex string keys.

The previously added match data preparsing will be able to convert hex
criterion strings into binary which can then be compared more rapidly.

Further, we actually want more then one ID string per public key.  The problem
is that X.509 certs refer to other X.509 certs by matching Issuer + AuthKeyId
to Subject + SubjKeyId, but PKCS#7 messages match against X.509 Issuer +
SerialNumber.

This patch just provides facilities for a later patch to make use of.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:36:11 +01:00
David Howells 0c903ab64f KEYS: Make the key matching functions return bool
Make the key matching functions pointed to by key_match_data::cmp return bool
rather than int.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:36:08 +01:00
David Howells c06cfb08b8 KEYS: Remove key_type::match in favour of overriding default by match_preparse
A previous patch added a ->match_preparse() method to the key type.  This is
allowed to override the function called by the iteration algorithm.
Therefore, we can just set a default that simply checks for an exact match of
the key description with the original criterion data and allow match_preparse
to override it as needed.

The key_type::match op is then redundant and can be removed, as can the
user_match() function.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:36:06 +01:00
David Howells 614d8c3901 KEYS: Remove key_type::def_lookup_type
Remove key_type::def_lookup_type as it's no longer used.  The information now
defaults to KEYRING_SEARCH_LOOKUP_DIRECT but may be overridden by
type->match_preparse().

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:36:04 +01:00
David Howells 462919591a KEYS: Preparse match data
Preparse the match data.  This provides several advantages:

 (1) The preparser can reject invalid criteria up front.

 (2) The preparser can convert the criteria to binary data if necessary (the
     asymmetric key type really wants to do binary comparison of the key IDs).

 (3) The preparser can set the type of search to be performed.  This means
     that it's not then a one-off setting in the key type.

 (4) The preparser can set an appropriate comparator function.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:36:02 +01:00
David Howells 1c9c115ccc Keyrings fixes for next
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVBhgQROxKuMESys7AQJv8w/+O61++U9OT5rL/X2pam3h4+tQmM7+2rU6
 rml9ZADkqKJVU1h3tT/WaFcmwR6J56buIWDZ7M7fPPRyvQPhfeBEHcakey+4iCd3
 SyFmP9ElkRvdOyoXRvImNIawsmnyme4CWSIQihSteyzyuV76odOI5HiJxMj6x8RV
 T4bjTsOMYugleWmuJzYPSniAs0my7Gxii7GK4WnLd+Jhxs8xJxiB3DNT4Kecxjuc
 MTldJIx32+Kj2JKp4ygbHM/WOI7jbdpseCedxbL4DNepgdXvVvV42pwPSCc2ydO/
 2b9kF+YnhsGbOv3Qd6GPPE5x0cMLKcmGf3DvJQcfCFSLjqpginGr0V/ylkVSf79S
 mQJLc2R7Z0ST7eFCyvClAeM9ZI6y+APWqo2wvVRNMww3NQhHyj43P2HPXiQEAryg
 UO6ZQehGHgxcx8uN/nB1gi4+S7+sZS6SzwvrTu04h5lYfCRrKSZGWDGpG/n7qtwo
 EKcWiAjupYbJtlDryL5Nz1xxkD6rpLKWbVfkO5FbJ8yAamz5XDl7FiQyJTu32LGj
 jbVma9sEIkJ5IB4mCAdF2tHi4o7QvQQbwWAPLu0B4hxp4JRslV5XhVVAH3CrvIFK
 l8A5nit0NwHms7d8+VLAyieknUForFHlmRheYXCSMvJDMfFToZrCNmTNHxZtyuuj
 voCrpkQYxGU=
 =9AZW
 -----END PGP SIGNATURE-----

Merge tag 'keys-next-fixes-20140916' into keys-next

Merge in keyrings fixes for next:

 (1) Insert some missing 'static' annotations.

Signed-off-by: David Howells <dhowells@redhat.com>
2014-09-16 17:32:55 +01:00
David Howells 68c45c7fea Keyrings fixes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVBhlXROxKuMESys7AQIQghAAmxHRD9kD7AJrlcL187gTXl5dRyxQNhX0
 myT9A1/01jHJh6mPPKS5jt5ooenwfcbvBkdUARLNLq6j7urIzFk+UtSmfcN1OMXw
 3y15nuJKbSCZRzPMR94Z0Ik23YED9dmc4ubxW7E+psoWWIZUvFt4GaGw7ei77O39
 8Pbt/n7nIx2+s8aiXte2Om/zqzyMEmcLd3Mzlqxe4GX1jo/ThNQZ348EL+ECxJEl
 3OKe7i7oRfa48+SybmhW5Bx/2f/aQMcIQX04+akOFMIC505rUg6CTzphcrTyV5/s
 6FdQexRquf8/Ei/6DMAYPhnumRfWJ5x9txiNSEY4i11AIjo6Bt65vaLPuNniYRNI
 b6Wn8SSE8Ucrq5RrmNlSmoJCs7r1NE+JdOaEPO0MDVkOouaja8daISmveV2AfZfF
 bITOQgEw3QRpyL2FYdwa39/NXCONBILfL5HvNyXEfPEHBhI8igTgEyXYRwNHV9jT
 dsVFTc9ZIrjksLt3CDh4Z8xdyZbyojYdRCfH/wna9aAkZpwwGfSYCcR3dE6SK26y
 IjkqEVJoCFHEnvLUQkAQrc/2qWX2D1qHrcjVLwzwbM5G66YIPeLcJlZK2FbiY0Ay
 Yc/kUJY0hU5W+TfFb1hhjO5G2DTTw8Ou6MGcxSTE3HwzqICjDhE7BwFZdVikHRP0
 xMtjfJnMwuM=
 =v+dv
 -----END PGP SIGNATURE-----

Merge tag 'keys-fixes-20140916' into keys-next

Merge in keyrings fixes, at least some of which later patches depend on:

 (1) Reinstate the production of EPERM for key types beginning with '.' in
     requests from userspace.

 (2) Tidy up the cleanup of PKCS#7 message signed information blocks and fix a
     bug this made more obvious.

Signed-off-by: David Howells <dhowells@redhat.coM>
2014-09-16 17:32:16 +01:00
David Howells cecf5d2e12 PKCS#7: Fix the parser cleanup to drain parsed out X.509 certs
Fix the parser cleanup code to drain parsed out X.509 certs in the case that
the decode fails and we jump to error_decode.

The function is rearranged so that the same cleanup code is used in the success
case as the error case - just that the message descriptor under construction is
only released if it is still pointed to by the context struct at that point.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:29:03 +01:00
David Howells 3cd0920cde PKCS#7: Provide a single place to do signed info block freeing
The code to free a signed info block is repeated several times, so move the
code to do it into a function of its own.  This gives us a place to add clean
ups for stuff that gets added to pkcs7_signed_info.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:29:03 +01:00
David Howells 15155b9a45 PKCS#7: Add a missing static
Add a missing static (found by checker).

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:07:07 +01:00
David Howells c3ce6dfa48 KEYS: Set pr_fmt() in asymmetric key signature handling
Printing in base signature handling should have a prefix, so set pr_fmt().

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2014-09-03 11:08:45 +10:00
David Howells 0aa0409401 PEFILE: Relax the check on the length of the PKCS#7 cert
Relax the check on the length of the PKCS#7 cert as it appears that the PE
file wrapper size gets rounded up to the nearest 8.

The debugging output looks like this:

	PEFILE: ==> verify_pefile_signature()
	PEFILE: ==> pefile_parse_binary()
	PEFILE: checksum @ 110
	PEFILE: header size = 200
	PEFILE: cert = 968 @547be0 [68 09 00 00 00 02 02 00 30 82 09 56 ]
	PEFILE: sig wrapper = { 968, 200, 2 }
	PEFILE: Signature data not PKCS#7

The wrapper is the first 8 bytes of the hex dump inside [].  This indicates a
length of 0x968 bytes, including the wrapper header - so 0x960 bytes of
payload.

The ASN.1 wrapper begins [ ... 30 82 09 56 ].  That indicates an object of size
0x956 - a four byte discrepency, presumably just padding for alignment
purposes.

So we just check that the ASN.1 container is no bigger than the payload and
reduce the recorded size appropriately.

Whilst we're at it, allow shorter PKCS#7 objects that manage to squeeze within
127 or 255 bytes.  It's just about conceivable if no X.509 certs are included
in the PKCS#7 message.

Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Peter Jones <pjones@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2014-09-03 10:30:24 +10:00
David Howells 876c6e3e02 KEYS: Fix public_key asymmetric key subtype name
The length of the name of an asymmetric key subtype must be stored in struct
asymmetric_key_subtype::name_len so that it can be matched by a search for
"<subkey_name>:<partial_fingerprint>".  Fix the public_key subtype to have
name_len set.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2014-09-03 10:27:28 +10:00
David Howells cf5b50fd2d X.509: Need to export x509_request_asymmetric_key()
Need to export x509_request_asymmetric_key() so that PKCS#7 can use it if
compiled as a module.

Reported-by: James Morris <jmorris@namei.org>
Signed-off-by: David Howells <dhowells@redhat.com>
2014-08-03 12:54:48 +01:00
David Howells 412eccbadf PKCS#7: X.509 certificate issuer and subject are mandatory fields in the ASN.1
X.509 certificate issuer and subject fields are mandatory fields in the ASN.1
and so their existence needn't be tested for.  They are guaranteed to end up
with an empty string if the name material has nothing we can use (see
x509_fabricate_name()).

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-07-31 14:46:44 +01:00
David Howells 5ce43ad282 PKCS#7: Use x509_request_asymmetric_key()
pkcs7_request_asymmetric_key() and x509_request_asymmetric_key() do the same
thing, the latter being a copy of the former created by the IMA folks, so drop
the PKCS#7 version as the X.509 location is more general.

Whilst we're at it, rename the arguments of x509_request_asymmetric_key() to
better reflect what the values being passed in are intended to match on an
X.509 cert.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-07-29 13:07:58 +01:00
David Howells 185de09c6a X.509: x509_request_asymmetric_keys() doesn't need string length arguments
x509_request_asymmetric_keys() doesn't need the lengths of the NUL-terminated
strings passing in as it can work that out for itself.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-07-28 14:55:55 +01:00
Wei Yongjun 63d2551ea7 PKCS#7: fix sparse non static symbol warning
Fixes the following sparse warnings:

crypto/asymmetric_keys/pkcs7_key_type.c:73:17: warning:
 symbol 'key_type_pkcs7' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David Howells <dhowells@redhat.com>
2014-07-28 14:55:54 +01:00
David Howells 8f3438ccea PKCS#7: Missing inclusion of linux/err.h
crypto/asymmetric_keys/pkcs7_key_type.c needs to #include linux/err.h rather
than relying on getting it through other headers.

Without this, the powerpc allyesconfig build fails.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David Howells <dhowells@redhat.com>
2014-07-25 11:33:53 +01:00
David Howells 633706a2ee Merge branch 'keys-fixes' into keys-next
Signed-off-by: David Howells <dhowells@redhat.com>
2014-07-22 21:55:45 +01:00
David Howells 64724cfc6e Merge remote-tracking branch 'integrity/next-with-keys' into keys-next
Signed-off-by: David Howells <dhowells@redhat.com>
2014-07-22 21:54:43 +01:00
David Howells 6204e00255 Signed PE file verifier
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAU71KqhOxKuMESys7AQKIwRAAgOXB0hjYkWKCHL2B1/8bNUtRKQKHsCms
 4HgNuLQ4v+RjpXDd4u0HvjkuD2ADDZlBPNSylsLsrnSXS7gH/b36vetAi8zYR/6B
 Tuvorh6BfnOkN61Xg0mwlnXkp9jisTwaZofMTDlpQ4gPAAy098Lb73ONIIlJFIH9
 WrUH/LLcPqtexdOOFtXPTBH0uz+qu8tcQHAotkP7Uwr4lDliVu1u4F2HkxRPvLjc
 IKSgb1mRa0AU0mKXbdqFREBhpVIOPS7r5mIisKnUh2d8LysSiA++zlD8/t2pfsVM
 enR7fo9pBEtJwhCrkff2p39DijR4M7s+SYF9soa9+9HQADt9D4bEtliqejGEkuQP
 CBl4LZ4eHlh1bjQbay+PixDmFxEbN14IKkvNaXBvoax8f0DdXV2URGxmhU0tM08U
 SFt2FaHhlBOsn4mhSoKJQnfHla5MP06ukrz4T+Qn2xd+lAX9e/sEBUQqT26o5Mgt
 3yTaBrg4PREYjPVhguKT04tWrMdtvxY0nKRuUUeEcT7EQNVB5v/efGaWCxLI5k3O
 wbkq5JvzSdq+VJOrby8m37fnEN7pxmF7mwOPXYfe3WPwJeX7xiYRc2ZGFntKdNzn
 zSNKC4/OYiNwn+2ANL89kcJ3pJyoJ57SsMPiXpCCekPIcLtvGddoCvZae6f171HA
 ZzlbxkjIxg0=
 =e1NL
 -----END PGP SIGNATURE-----

Merge tag 'keys-pefile-20140709' into keys-next

Here's a set of changes that implement a PE file signature checker.

This provides the following facility:

 (1) Extract the signature from the PE file.  This is a PKCS#7 message
     containing, as its data, a hash of the signed parts of the file.

 (2) Digest the signed parts of the file.

 (3) Compare the digest with the one from the PKCS#7 message.

 (4) Validate the signatures on the PKCS#7 message and indicate
     whether it was matched by a trusted key.

Signed-off-by: David Howells <dhowells@redhat.com>
2014-07-22 21:54:05 +01:00
David Howells 1ca72c96db PKCS#7 message parser
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAU7vyohOxKuMESys7AQJRkQ//XhtkCB9qDPrD/Hq6s3SDB7FCPWk8eJ9M
 GhawiLonBFgsRqWst20cW1syc+7ECjkTZU0vD5GqMHealXj9Fho+7jyf08ShP+jM
 AFBRfjoHKklOuh4C1lhB5IglR1zAXpmLHA2mP/r58BjEpOBEwlmh8rri/9/kk6iX
 hAV79d23IaoM4ueGb4vVy61ZpsKA0YQadJK1xRjXzFPAuS3f4i6W7uKG9QmsJ56m
 DaP++rtyJPByRVb/tJqUeJAIPaXQg9JRXD8tNGJ2qCdulEbHJQhNzp2ukQEMmfhS
 RaogNO7jcfdM/4BeIoRJxNt3VcvHChSdbXP1YO4V792BdxnjsXO8GdEKXp53ijoP
 mZ6Z1JsmpFKPGvAWA0eQUMYU4vnRzAtIo4CgdsIAQYpGrxOOnv+28UWalm7NLC1l
 ++YCesD03atd/XrdSNF082Xh8TTcRKI1OBOtBDya2ZhKMy56Bj/l6rOYVBw+Au6E
 Yfressl7jCRaaT/ZHefZwKsJ5ac+MTcwAk0LlKflg+f8vdpMDnUfZxhUheM2EwWw
 RyTHHa6IWUyYIOTXQ88KF1PmNXgGWBhe90yrHO909yaNWBnvFbPdJ91DuXvKUjza
 SZ0GLS2+Vt+6TnlzxaHITE1ly5m3avZDAosIqEhGKymG6EL0mg469vpNGJNUbvIp
 5jZqJ8wSF5Q=
 =aRKT
 -----END PGP SIGNATURE-----

Merge tag 'keys-pkcs7-20140708' into keys-next

Here's a set of changes that implement a PKCS#7 message parser in the kernel.

The PKCS#7 message parsing will then be used to limit kexec to authenticated
kernels only if so configured.

The changes provide the following facilities:

 (1) Parse an ASN.1 PKCS#7 message and pick out useful bits such as the data
     content and the X.509 certificates used to sign it and all the data
     signatures.

 (2) Verify all the data signatures against the set of X.509 certificates
     available in the message.

 (3) Follow the certificate chains and verify that:

     (a) for every self-signed X.509 certificate, check that it validly signed
     	 itself, and:

     (b) for every non-self-signed certificate, if we have a 'parent'
     	 certificate, the former is validly signed by the latter.

 (4) Look for intersections between the certificate chains and the trusted
     keyring, if any intersections are found, verify that the trusted
     certificates signed the intersection point in the chain.

 (5) For testing purposes, a key type can be made available that will take a
     PKCS#7 message, check that the message is trustworthy, and if so, add its
     data content into the key.

Note that (5) has to be altered to take account of the preparsing patches
already committed to this branch.

Signed-off-by: David Howells <dhowells@redhat.com>
2014-07-22 21:53:21 +01:00