The UCB1400 driver IRQ probe code fails to find an interrupt if all
the interrupts in the range 0-31 are nonprobe-able. This patch
removes the check of the return value so interrupts above 31 can be
detected.
Tested on InHand Fingertip4 PXA270 board.
Signed-off-by: Vernon Sauder <vsauder@inhand.com>
Acked-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Fix incorrect length argument for strncpy and strncat by replacing them with
strlcpy and strlcat
Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias
is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable
"input" platform drivers, to re-enable auto loading.
[dbrownell@users.sourceforge.net: more drivers, registration fixes]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
- Update CREDITS with the pc-speaker driver authors.
- Prevent pcspkr from being built together with snd-pcsp.
Both pcspkr and snd-pcsp use the same platform driver name "pcspkr".
Signed-off-by: Stas Sergeev <stsp@aknet.ru>
two reasons:
1. GPIO namings and their mode definitions are conceptually not part
of the PXA register definitions
2. this is actually a temporary move in the transition of PXA2xx to
use MFP-alike APIs (as what PXA3xx is now doing), so that legacy
code will still work and new code can be added in step by step
Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Avoid double free situation from happening by removing input_free_device()
after input_unregister_device(). Suggested by Dmitry Torokhov.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Add a platform driver for the SuperH KEYSC block. The driver expects to get
mode, timing information and keypad layout from the board code as platform
data. The board code is resonsible for pin configuration.
Both sh7343 and sh7722 should be supported, but only the sh7722 processor has
been tested so far. SH_KEYSC_MODE_3 is yet to be tested.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The WM97xx touch screen controllers can be used to generate a wakeup
event when the system is suspended. Provide a new core API call
wm97xx_set_suspend_mode() allowing machine drivers to enable this. If no
suspend_mode is provided then the touch panel will be powered down when
the system is suspended.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
The touchscreen interrupt is driven by human input which can reasonably
be used to provide entropy.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
As well as clarifying the fact that the driver can cope if a second
interrupt occurs before the IRQ work is scheduled this also ensures
that calls to the machine irq_enable() are balanced, making that easier
to implement. Normally this is redundant due to the interrupt disabling
but some unusal board configurations can trigger it.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
This is a driver for Zhen Hua PPM-4CH RC transmitter (commonly used in cheap
Ready To Fly RC helicopters by Walkera) which using "Zhen Hua 5-byte protocol"
for using them as a four axis joystick via serial port. Transmitter connected
to serial port (19200 8N1) sending periodically 5 bytes where first byte is for
synchronization and next four bytes are values of axis.
Signed-off-by: Martin Kebert <gkmarty@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
USBHID driver only supports relative mode with this tablet so let aiptek
module handle it.
Signed-off-by: Dmitry Guryanov <guryanov@dgap.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
This implements suspend and autosuspend support for wacom devices.
It works by using the usb last busy functionality triggered in the
completion callback.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
The messages for led/rumble are exactly 3 and 8 bytes respectively.
Hence set up the transfer_buffer_length accordingly.
Signed-off-by: Michael Gruber <lists.mg@googlemail.com>
Acked-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Fix the following build warning:
drivers/input/keyboard/omap-keypad.c: In function 'omap_kp_probe':
drivers/input/keyboard/omap-keypad.c:418: warning: 'row_idx' is used uninitialized in this function
drivers/input/keyboard/omap-keypad.c:421: warning: 'col_idx' is used uninitialized in this function
These variables are useful when cpu_is_omap24xx(), and otherwise just
for useless cleanup.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Cleanup IRQ handling in gpio_keys: bail after handling the IRQ, and
report IRQ_NONE if we never handle it.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Add support for the PSIF peripheral on AVR32 AP7 devices. It is implemented
as a serio driver and will behave like a serio 8042 device.
The driver has been tested with a Dell keyboard capable of running on 3.3
volts and a Logitech mouse on the STK1000 + STK1002 starter kit. The Logitech
mouse was hacked by cutting the cord and using a bi-directional voltage
converter to get the required 5 volt I/O level.
For more information about the PSIF module, see the datasheet for AT32AP700X at
http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Start cleaning up GPIO handling for OMAP5912 OSK board:
- Initialize GPIOs using the cross-platform calls, not the old
OMAP-private ones.
- Move touchscreen setup out of ads7846 code into board-specfic
setup code, where it belongs.
This doesn't depend on the patches to update OMAP to use the
gpiolib implementation framework.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
DMA on the stack is not allowed. The buffer must be kmalloced.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
GFP_ATOMIC should not be used when GFP_KERNEL can be used.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
The driver version numbers and changelog have not been updated in a
long while to reflect actual changes. Remove the version number and
add a notice that later changes can be tracked in SCM.
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Commit 4994cd8dadcf9d484ab3ec19f3c7c7a4e5353c1c introduced a
regression which causes xpad to report force feedback cababilities
for non-360 controllers too, even while there is no actual support
for those.
Fix that by adding a check for XTYPE_XBOX360 to xpad_init_ff().
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
The buttons BTN_C and BTN_Z are only used in the original xbox
controller, not in xbox360 controller. Therefore only add them to
keybit when the controller is a non-360 one.
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Add Mad Catz and 0x0e6f xbox360 controllers which are already found
in xpad_device[] table in xpad.c into the vendor id list. Also add
Logitech into the vendor list for Logitech Chillstream gamepads.
Also add the RedOctane Guitar Hero X-plorer.
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
The commit ae91d10aab2762f81733e9194cb56eff99c8d808 inverted Y and RY
axes on xbox360 so that up is positive and down is negative.
This is wrong, as axes on game controllers have up as negative per
convention. Also, even xpad itself reports HAT0X with up as negative.
Fix that by inverting them again.
Also, according to http://bugzilla.kernel.org/show_bug.cgi?id=10337 the
original xbox controllers also have the Y and RY axes inverted.
Fix that by inverting them as well.
Cc: Brian Magnuson <bdmagnuson@gmail.com>
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
For devices not specifically listed in xpad.c, xpad->dpad_mapping
is initially set to MAP_DPAD_UNKNOWN. In xpad_probe() it gets changed
to either MAP_DPAD_TO_BUTTONS or MAP_DPAD_TO_AXES, depending on the
module parameter dpad_to_buttons.
However, MAP_DPAD_UNKNOWN is defined as -1, while the field is u8.
This results in actual value of 255, causing the MAP_DPAD_UNKNOWN
check in xpad_probe() to fail.
Fix that by defining MAP_DPAD_UNKNOWN as 2 instead.
Also, setting module parameter dpad_to_buttons to 1 should obviously
map dpad to buttons, while the default behaviour (0) should be to map
dpad to axes. However, dpad_to_buttons is directly assigned to
xpad->dpad_mapping, and as MAP_DPAD_TO_BUTTONS is 0, the actual
behaviour is reversed.
Fix that by negating dpad_to_buttons in assignment.
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Match Xbox 360 controllers using the interface info, i.e. interface
class 255 (Vendor specific), subclass 93 and protocol 1, instead of
specifying the device ids individually. As the class is vendor-specific,
we have to still match against vendor id as well, though.
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Mike Arthur <mike.arthur@wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Mike Arthur <mike.arthur@wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Lars Munch <lars@segv.dk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Mike Arthur <mike.arthur@wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Lars Munch <lars@segv.dk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Mike Arthur <mike.arthur@wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Add support for the touchscreen controllers provided by Wolfson
Microelectronics WM97xx series chips in both polled and streaming
modes.
These drivers have been maintained out of tree since 2003. During
that time the driver the primary maintainer was Liam Girdwood and
a number of people have made contributions including Dmitry Baryshkov,
Stanley Cai, Rodolfo Giometti, Russell King, Marc Kleine-Budde,
Ian Molton, Vincent Sanders, Andrew Zabolotny, Graeme Gregory,
Mike Arthur and myself. Apologies to anyone I have omitted.
Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Mike Arthur <mike.arthur@wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
This updates the ads7846 driver to handle external vREF (required
on boards using ads7843 chips) without module parameters, and also
removes a needless variable with its associated bogus gcc warning.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Enables the Sharp Zaurus Collie and Poodle devices to be turned off
by pressing the "Cancel" button for a few seconds (as designed by
Sharp).
Additional small cleanups:
- removal of unused #defines and variables
- add missing __devinit/__devexit/__devinitconst annotations
- reorganized copyright notice
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Everyone should be using input_{get|set}_drvdata() by now.
Alias them to dev_{get|set}_drvdata() and remove ->private.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Recent driver core change causes references to parent devices being
dropped early, at device_del() time, as opposed to when all children
are freed. This causes oops in evdev with grabbed devices. Take the
reference to the parent input device ourselves to ensure that it
stays around long enough.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
