Commit Graph

15 Commits

Author SHA1 Message Date
Roger Pau Monne 4892c9b4ad xen: add support for MSI message groups
Add support for MSI message groups for Xen Dom0 using the
MAP_PIRQ_TYPE_MULTI_MSI pirq map type.

In order to keep track of which pirq is the first one in the group all
pirqs in the MSI group except for the first one have the newly
introduced PIRQ_MSI_GROUP flag set. This prevents calling
PHYSDEVOP_unmap_pirq on them, since the unmap must be done with the
first pirq in the group.

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-03-18 14:40:09 +00:00
Konrad Rzeszutek Wilk 8deb3eb146 xen/mcfg: Call PHYSDEVOP_pci_mmcfg_reserved for MCFG areas.
The PCI MMCONFIG area is usually reserved via the E820 so the Xen hypervisor
is aware of these regions. But they can also be enumerated in the ACPI
DSDT which means the hypervisor won't know of them until the initial
domain informs it of via PHYSDEVOP_pci_mmcfg_reserved.

This is what this patch does for all of the MCFG regions that the
initial domain is aware of (E820 enumerated and ACPI).

Reported-by:  Santosh Jodh <Santosh.Jodh@citrix.com>
CC: Jan Beulich <JBeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
CC: David Vrabel <david.vrabel@citrix.com>
CC: Mukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v1: Redid it a bit]
[v2: Dropped the P2M 1-1 setting]
[v3: Check for Xen in-case we are running under baremetal]
[v4: Wrap with CONFIG_PCI_MMCONFIG]
2013-11-08 15:12:52 -05:00
Jan Beulich 909b3fdb0d xen-pciback: notify hypervisor about devices intended to be assigned to guests
For MSI-X capable devices the hypervisor wants to write protect the
MSI-X table and PBA, yet it can't assume that resources have been
assigned to their final values at device enumeration time. Thus have
pciback do that notification, as having the device controlled by it is
a prerequisite to assigning the device to guests anyway.

This is the kernel part of hypervisor side commit 4245d33 ("x86/MSI:
add mechanism to fully protect MSI-X table from PV guest accesses") on
the master branch of git://xenbits.xen.org/xen.git.

CC: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-22 10:20:55 -04:00
Linus Torvalds f1c6872e49 Features:
* Allow a Linux guest to boot as initial domain and as normal guests
    on Xen on ARM (specifically ARMv7 with virtualized extensions).
    PV console, block and network frontend/backends are working.
 Bug-fixes:
  * Fix compile linux-next fallout.
  * Fix PVHVM bootup crashing.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJQbJELAAoJEFjIrFwIi8fJSI4H/32qrQKyF5IIkFKHTN9FYDC1
 OxEGc4y47DIQpGUd/PgZ/i6h9Iyhj+I6pb4lCevykwgd0j83noepluZlCIcJnTfL
 HVXNiRIQKqFhqKdjTANxVM4APup+7Lqrvqj6OZfUuoxaZ3tSTLhabJ/7UXf2+9xy
 g2RfZtbSdQ1sukQ/A2MeGQNT79rh7v7PrYQUYSrqytjSjSLPTqRf75HWQ+eapIAH
 X3aVz8Tn6nTixZWvZOK7rAaD4awsFxGP6E46oFekB02f4x9nWHJiCZiXwb35lORb
 tz9F9td99f6N4fPJ9LgcYTaCPwzVnceZKqE9hGfip4uT+0WrEqDxq8QmBqI5YtI=
 =gxJD
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.7-arm-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull ADM Xen support from Konrad Rzeszutek Wilk:

  Features:
   * Allow a Linux guest to boot as initial domain and as normal guests
     on Xen on ARM (specifically ARMv7 with virtualized extensions).  PV
     console, block and network frontend/backends are working.
  Bug-fixes:
   * Fix compile linux-next fallout.
   * Fix PVHVM bootup crashing.

  The Xen-unstable hypervisor (so will be 4.3 in a ~6 months), supports
  ARMv7 platforms.

  The goal in implementing this architecture is to exploit the hardware
  as much as possible.  That means use as little as possible of PV
  operations (so no PV MMU) - and use existing PV drivers for I/Os
  (network, block, console, etc).  This is similar to how PVHVM guests
  operate in X86 platform nowadays - except that on ARM there is no need
  for QEMU.  The end result is that we share a lot of the generic Xen
  drivers and infrastructure.

  Details on how to compile/boot/etc are available at this Wiki:

    http://wiki.xen.org/wiki/Xen_ARMv7_with_Virtualization_Extensions

  and this blog has links to a technical discussion/presentations on the
  overall architecture:

    http://blog.xen.org/index.php/2012/09/21/xensummit-sessions-new-pvh-virtualisation-mode-for-arm-cortex-a15arm-servers-and-x86/

* tag 'stable/for-linus-3.7-arm-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (21 commits)
  xen/xen_initial_domain: check that xen_start_info is initialized
  xen: mark xen_init_IRQ __init
  xen/Makefile: fix dom-y build
  arm: introduce a DTS for Xen unprivileged virtual machines
  MAINTAINERS: add myself as Xen ARM maintainer
  xen/arm: compile netback
  xen/arm: compile blkfront and blkback
  xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree
  xen/arm: receive Xen events on ARM
  xen/arm: initialize grant_table on ARM
  xen/arm: get privilege status
  xen/arm: introduce CONFIG_XEN on ARM
  xen: do not compile manage, balloon, pci, acpi, pcpu and cpu_hotplug on ARM
  xen/arm: Introduce xen_ulong_t for unsigned long
  xen/arm: Xen detection and shared_info page mapping
  docs: Xen ARM DT bindings
  xen/arm: empty implementation of grant_table arch specific functions
  xen/arm: sync_bitops
  xen/arm: page.h definitions
  xen/arm: hypercalls
  ...
2012-10-07 07:13:01 +09:00
Jan Beulich 9fa5780bee USB EHCI/Xen: propagate controller reset information to hypervisor
Just like for the in-tree early console debug port driver, the
hypervisor - when using a debug port based console - also needs to be
told about controller resets, so it can suppress using and then
re-initialize the debug port accordingly.

Other than the in-tree driver, the hypervisor driver actually cares
about doing this only for the device where the debug is port actually
in use, i.e. it needs to be told the coordinates of the device being
reset (quite obviously, leveraging the addition done for that would
likely benefit the in-tree driver too).

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18 17:20:48 +01:00
Stefano Stabellini 256f631f1f xen/arm: Introduce xen_ulong_t for unsigned long
All the original Xen headers have xen_ulong_t as unsigned long type, however
when they have been imported in Linux, xen_ulong_t has been replaced with
unsigned long. That might work for x86 and ia64 but it does not for arm.
Bring back xen_ulong_t and let each architecture define xen_ulong_t as they
see fit.

Also explicitly size pointers (__DEFINE_GUEST_HANDLE) to 64 bit.


Changes in v3:

- remove the incorrect changes to multicall_entry;
- remove the change to apic_physbase.


Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-14 13:34:43 +00:00
Stefano Stabellini 9846ff10af xen: support pirq_eoi_map
The pirq_eoi_map is a bitmap offered by Xen to check which pirqs need to
be EOI'd without having to issue an hypercall every time.
We use PHYSDEVOP_pirq_eoi_gmfn_v2 to map the bitmap, then if we
succeed we use pirq_eoi_map to check whether pirqs need eoi.

Changes in v3:

- explicitly use PHYSDEVOP_pirq_eoi_gmfn_v2 rather than
PHYSDEVOP_pirq_eoi_gmfn;

- introduce pirq_check_eoi_map, a function to check if a pirq needs an
eoi using the map;

-rename pirq_needs_eoi into pirq_needs_eoi_flag;

- introduce a function pointer called pirq_needs_eoi that is going to be
set to the right implementation depending on the availability of
PHYSDEVOP_pirq_eoi_gmfn_v2.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-20 15:34:07 -04:00
Tang Liang 8605c6844f xen: Utilize the restore_msi_irqs hook.
to make a hypercall to restore the vectors in the MSI/MSI-X
configuration space.

Signed-off-by: Tang Liang <liang.tang@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-01-12 11:55:22 -05:00
Jan Beulich 55e901fc1f xen/pci: support multi-segment systems
Now that the hypercall interface changes are in -unstable, make the
kernel side code not ignore the segment (aka domain) number anymore
(which results in pretty odd behavior on such systems). Rather, if
only the old interfaces are available, don't call them for devices on
non-zero segments at all.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
[v1: Edited git description]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-22 16:23:46 -04:00
Stefano Stabellini e5fc734541 xen: use PHYSDEVOP_get_free_pirq to implement find_unbound_pirq
Use the new hypercall PHYSDEVOP_get_free_pirq to ask Xen to allocate a
pirq. Remove the unsupported PHYSDEVOP_get_nr_pirqs hypercall to get the
amount of pirq available.

This fixes find_unbound_pirq that otherwise would return a number
starting from nr_irqs that might very well be out of range in Xen.

The symptom of this bug is that when you passthrough an MSI capable pci
device to a PV on HVM guest, Linux would fail to enable MSIs on the
device.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2010-12-02 14:28:22 +00:00
Weidong Han e28c31a96b xen: register xen pci notifier
Register a pci notifier to add (or remove) pci devices to Xen via
hypercalls. Xen needs to know the pci devices present in the system to
handle pci passthrough and even MSI remapping in the initial domain.

Signed-off-by: Weidong Han <weidong.han@intel.com>
Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2010-10-27 18:56:07 +01:00
Jeremy Fitzhardinge 38aa66fcb7 xen: remap GSIs as pirqs when running as initial domain
Implement xen_register_gsi to setup the correct triggering and polarity
properties of a gsi.
Implement xen_register_pirq to register a particular gsi as pirq and
receive interrupts as events.
Call xen_setup_pirqs to register all the legacy ISA irqs as pirqs.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22 21:25:43 +01:00
Stefano Stabellini 42a1de56f3 xen: implement xen_hvm_register_pirq
xen_hvm_register_pirq allows the kernel to map a GSI into a Xen pirq and
receive the interrupt as an event channel from that point on.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22 21:25:41 +01:00
Stefano Stabellini 01557baff6 xen: get the maximum number of pirqs from xen
Use PHYSDEVOP_get_nr_pirqs to get the maximum number of pirqs from xen.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22 21:25:40 +01:00
Jeremy Fitzhardinge a42089dd35 xen: Add Xen interface header files
Add Xen interface header files. These are taken fairly directly from
the Xen tree, but somewhat rearranged to suit the kernel's conventions.

Define macros and inline functions for doing hypercalls into the
hypervisor.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ian Pratt <ian.pratt@xensource.com>
Signed-off-by: Christian Limpach <Christian.Limpach@cl.cam.ac.uk>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2007-07-18 08:47:42 -07:00